| ADDAPT® Ester 20DA | ADDAPT Chemicals BV | ADDAPT® Ester 20DA is a synthetic ester used as a solvent-free pigment dispersing agent for solvent based systems. It is recommended for dispersing carbon black in milling paste and alkyd paint. | |
| ADDITOL® XL 6514/80 | Allnex | Additol® XL 6514/80 es un agente humectante y dispersante para sistemas de pintura con y sin solventes. | Request Sample |
| ADDITOL® XL 6521 | Allnex | Additol® XL 6521 is a high molecular wetting and dispersing agent with cationic character for carbon black and organic pigments. | Request Sample |
| Busperse® 2180 | Buckman Laboratories, Inc. | Busperse® 2180 is a new, patented dispersant for use in coatings, stains, and clear finishes. It is a 60%-active emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 7.25. The...Vea Mas Busperse® 2180 is a new, patented dispersant for use in coatings, stains, and clear finishes. It is a 60%-active emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 7.25. The product is generally nonionic at neutral to alkaline pH and slightly cationic at acidic pH. Busperse® 2180 disperses in aqueous systems with good agitation. It is not soluble in petroleum distillates, such as mineral spirits, toluene, xylene, aromatic 150, or VM&P naptha. The product is soluble in solvent systems that contain oxygenated solvents, such as glycols, glycol ethers, ketones, and acetates. Vea Menos | |
| Busperse® 229 | Buckman Laboratories, Inc. | Busperse® 229 is an organic dispersant designed to minimize the problems of blistering and adhesion loss and at the same time act as a pigment dispersant and wetting agent. The effectiveness of Busperse® 229 is attributed to its ability to allow better we...Vea Mas Busperse® 229 is an organic dispersant designed to minimize the problems of blistering and adhesion loss and at the same time act as a pigment dispersant and wetting agent. The effectiveness of Busperse® 229 is attributed to its ability to allow better wetting of the substrate by the binder, reducing moisture permeability of the paint film. This product should be added with water prior to the addition of wetting agents and pigments. The pigment slurry should be dispersed at high speed, cooled and let down with the water-reducible alkyd binder. Vea Menos | |
| Busperse® 275 | Buckman Laboratories, Inc. | Busperse® 275 is an effective general purpose, anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 17...Vea Mas Busperse® 275 is an effective general purpose, anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 173.310 of the U.S. Food and Drug Administration regulations. This product is a yellow-orange liquid, and it may be used in coatings at levels between 0.3% and 1.0%, based on total weight of the formulation. Vea Menos | |
| Busperse® 282 | Buckman Laboratories, Inc. | Busperse® 282 is an effective, general purpose anionic dispersant for use in water-based systems such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176...Vea Mas Busperse® 282 is an effective, general purpose anionic dispersant for use in water-based systems such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Busperse® 284 may be used in coatings at levels between 0.3% and 1.1%, based on total weight of the formulation. Vea Menos | |
| Busperse® 284 | Buckman Laboratories, Inc. | Busperse® 284 is an effective, general purpose anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176...Vea Mas Busperse® 284 is an effective, general purpose anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Busperse® 284 may be used in coatings at levels between 0.3% and 1.1%, based on total weight of the formulation. Vea Menos | |
| Busperse® 47 | Buckman Laboratories, Inc. | Busperse® 47 is a 100% solids, zero VOC, nonionic dispersing aid, wetting aid and viscosity depressant that is compatible with a wide range of vehicles. Busperse® 47 has shown the ability to aid in dispersing difficult-to-grind pigments, such as organic r...Vea Mas Busperse® 47 is a 100% solids, zero VOC, nonionic dispersing aid, wetting aid and viscosity depressant that is compatible with a wide range of vehicles. Busperse® 47 has shown the ability to aid in dispersing difficult-to-grind pigments, such as organic reds, yellows, and oranges as well as various black pigments. The nonionic nature of Busperse® 47 makes it compatible in a wide range of coatings vehicles allowing for ease of formulation. This product can be dispersed directly into a variety of solvent-based polymers, such as conventional- and high-solids alkyds, polyesters, two-component epoxies, and urethanes. Busperse® 47 is soluble in many organic solvents, both polar and non polar. It should be added directly to the grind prior to the addition of the most difficult to grind pigment. Vea Menos | |
| BYK®-9077 | BYK | Es una aditivo humectante y de dispersión para sistemas sin solvente y concentrados de pigmento, con copolímero de peso molecular alto con grupos afines al pigmento. | Request Sample |
| BYK®-SYNERGIST 2100 | BYK | Productos sinérgicos de pigmento. Complejo insoluble de pigmento. | Request Sample |
| Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Coating Additives | Agente humectante de substrato, el Surfynol CT-211 se emplea en revestimientos a base de agua, tintas, adhesivos y muchos otros sistemas. Los niveles de uso estarán entre 0,1 y 3,0% en formulación total. | Request Sample |
| Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Coating Additives | En aplicaciones de pulido de pigmento, Surfynol CT-221 mejora el desarrollo de color mediante la humectación superior de las partículas de pigmento, y controla la formación de espuma debida al proceso de fabricación. Proporciona baja viscosidad en altos c...Vea Mas En aplicaciones de pulido de pigmento, Surfynol CT-221 mejora el desarrollo de color mediante la humectación superior de las partículas de pigmento, y controla la formación de espuma debida al proceso de fabricación. Proporciona baja viscosidad en altos cargamentos de pigmento y excelente estabilidad de dispersión. Vea Menos | Request Sample |
| DISPERBYK®-2163 | BYK | Aditivo humectante y de dispersión, de peso molecular alto, para sistemas transmitidos por solvente y concentrados de pigmento. Soluciones de copolímeros de bloque, de peso molecular alto, con grupos afines al pigmento. | Request Sample |
| DISPERBYK®-2164 | BYK | Aditivo humectante y de dispersión, de peso molecular alto, para sistemas transmitidos por solvente y concentrados de pigmento. Soluciones de los copolímeros de bloque, de peso molecular alto, con grupos afines al pigmento. | Request Sample |
| Dispersogen® FA | Clariant - Coatings & Construction Chemicals | Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment pr...Vea Mas Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment preparations and point of sale colorants. Vea Menos | |
| DISPEX® Ultra FA 4416 | BASF Formulation Additives | DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-...Vea Mas DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-emulsions. With its excellent wetting properties, DISPEX® Ultra FA 4416 when used with inorganic and organic pigments produces a high gloss and good color development in low and co-solvent free systems. DISPEX® Ultra FA 4416 prevents rub-out effects by using critical pigment combinations, e.g. titanium dioxide / phthalo blue. It is suitable for air and oven drying coatings as well as baking coatings. Since DISPEX® Ultra FA 4416 has no effect on pot-life it is also recommended for aqueous 2 pack PUR coatings. It allows the formulation of economical inorganic slurries and pigment concentrates for emulsion paints and consumer coatings. Here it combines the advantages of a low paste-viscosity with anti-settling characteristics and excellent compatibility to all types of aqueous base-paints. Vea Menos | |
| DISPEX® Ultra PX 4275 | BASF Formulation Additives | DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 p...Vea Mas DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 pack PUR coating. This product has a low foaming tendency and to the best of our knowledge has no negative influence on the water and corrosion resistance. DISPEX® Ultra PX 4275 is used in combination with zinc oxid, an increase of viscosity may occur. Vea Menos | |
| E-SPERSE 100 | Ethox Chemicals | E-SPERSE 100 is an excellent dispersant that will lower the viscosity of many water-based pigment dispersions produced from dry pigment or presscake. | |
| E-SPERSE 130 | Ethox Chemicals | E-SPERSE 130 is a dispersant that stabilizes and compatibilizes pigment/polymer/plasticizer non-aqueous systems. | |
| E-SPERSE 131 | Ethox Chemicals | E-Sperse 131 significantly improves the distribution of additives, inorganic, and organic pigment into polyester and polyolefins. | |
| E-SPERSE 132 | Ethox Chemicals | E-SPERSE 132 is a dispersant for aqueous systems. | |
| E-SPERSE 315 | Ethox Chemicals | E-SPERSE 315 is a dispersant for aqueous systems. | |
| E-SPERSE 321 | Ethox Chemicals | E-SPERSE 321 is a dispersant for aqueous systems. | |
| E-SPERSE 322 | Ethox Chemicals | E-SPERSE 322 is a dispersant for aqueous systems. | |
| E-SPERSE 323 | Ethox Chemicals | E-Sperse 323 enhances and maintains lower viscosity in purely aqueous pigment dispersions. | |
| E-SPERSE 325 | Ethox Chemicals | E-SPERSE 325 is a dispersant for aqueous systems. | |
| E-SPERSE 326 | Ethox Chemicals | E-SPERSE 326 is a dispersant for aqueous systems. | |
| E-SPERSE 327 | Ethox Chemicals | E-SPERSE 327 is a dispersant for aqueous systems. | |
| E-SPERSE 328 | Ethox Chemicals | E-SPERSE 328 is an excellent dispersant that will lower the viscosity of many water-based pigment dispersions produced from dry pigments or presscake. | |
| E-SPERSE 330 | Ethox Chemicals | E-SPERSE 330 is a dispersant for aqueous systems. | |
| E-SPERSE 337 | Ethox Chemicals | E-SPERSE 337 is a dispersant that is used for aqueous systems. | |
| E-SPERSE 344 | Ethox Chemicals | E-SPERSE 344 is a dispersant for aqueous systems. | |
| E-SPERSE 345 | Ethox Chemicals | E-SPERSE 345 is a dispersant for aqueous systems. | |
| E-SPERSE 346 | Ethox Chemicals | E-SPERSE 346 is a dispersant for aqueous systems. | |
| E-SPERSE 506 | Ethox Chemicals | E-SPERSE 506 is a novel dispersant that shows dramatic viscosity improvement characteristics in water-based systems. This allows for higher pigment loadings and increased dispersion stability. Marked reduction of pseudoplastic behavior andminimization of ...Vea Mas E-SPERSE 506 is a novel dispersant that shows dramatic viscosity improvement characteristics in water-based systems. This allows for higher pigment loadings and increased dispersion stability. Marked reduction of pseudoplastic behavior andminimization of viscosity increases upon aging are not able features of E-SPERSE 506. Vea Menos | |
| FLO-THENE UF1.5N | Sumitomo Seika America, Inc. | FLO-THENE UF1.5N is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF1.5N retains the excellent properties of polyethylene as it contains no add...Vea Mas FLO-THENE UF1.5N is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF1.5N retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. Vea Menos | |
| FLO-THENE UF20S | Sumitomo Seika America, Inc. | FLO-THENE UF20S is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF20S retains the excellent properties of polyethylene as it contains no addit...Vea Mas FLO-THENE UF20S is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF20S retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. Vea Menos | |
| FLO-THENE UF4 | Sumitomo Seika America, Inc. | FLO-THENE UF4 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF4 retains the excellent properties of polyethylene as it contains no additives...Vea Mas FLO-THENE UF4 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF4 retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. Vea Menos | |
| FLO-THENE UF80 | Sumitomo Seika America, Inc. | FLO-THENE UF80 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF80 retains the excellent properties of polyethylene as it contains no additiv...Vea Mas FLO-THENE UF80 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF80 retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. Vea Menos | |
| Graph'Up W3 | CARBON WATERS | Graph'Up W3 is a ready-to-use additive boosting anti-corrosion, UV resistance, anti-scratch, and anti-clogging performance of waterbased formulations. | |
| LOPON® DA 200 | ICL Phosphate Specialty | LOPON® DA 200 is a universal dispersing agent based on low molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mi...Vea Mas LOPON® DA 200 is a universal dispersing agent based on low molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON ® DA 200 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. Vea Menos | Request Sample |
| LOPON® DA 201 | ICL Phosphate Specialty | LOPON® DA 201 is a highly efficient dispersing agent based on low molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will ...Vea Mas LOPON® DA 201 is a highly efficient dispersing agent based on low molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will be suppressed during the drying process as it can happen through the formation of sodium carbonate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 201 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. Vea Menos | Request Sample |
| LOPON® DA 400 | ICL Phosphate Specialty | LOPON® DA 400 is a universal dispersing agent based on middle molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and...Vea Mas LOPON® DA 400 is a universal dispersing agent based on middle molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON ® DA 400 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. Vea Menos | Request Sample |
| LOPON® DA 401 | ICL Phosphate Specialty | LOPON® DA 401 is a highly efficient dispersing agent based on middle molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence wi...Vea Mas LOPON® DA 401 is a highly efficient dispersing agent based on middle molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will be suppressed during the drying process as it can happen through the formation of sodium carbonate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 401 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. Vea Menos | Request Sample |
| LOPON® DA 402 | ICL Phosphate Specialty | LOPON® DA 402 is a universal dispersing agent based on middle molecular weight ammonium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, a...Vea Mas LOPON® DA 402 is a universal dispersing agent based on middle molecular weight ammonium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 402 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. Vea Menos | Request Sample |
| LOPON® P | ICL Phosphate Specialty | LOPON® P is a dispersing agent for facade coatings and pigment slurries. The clear yellowish liquid is composed of phosphonates and amino derivative in aqueous solution. LOPON® P offers following advantages: excellent water softening properties, excellent...Vea Mas LOPON® P is a dispersing agent for facade coatings and pigment slurries. The clear yellowish liquid is composed of phosphonates and amino derivative in aqueous solution. LOPON® P offers following advantages: excellent water softening properties, excellent lime binding efficiency, excellent pigment wetting charateristics for inorganic pigments, and excellent colour stabilisation for shaded paints systems. Vea Menos | Request Sample |
| LOPON® PL | ICL Phosphate Specialty | LOPON® PL is a dispersing agent for color systems. It has high pigment-wetting properties, stable color intensity, equal pigment distribution, and enables storage stability. | Request Sample |
| OMBRELUB 533 | Munzing Chemie | OMBRELUB 533 is a white, turbid nonionic liquid, very finely dispersed and stable dispersion of calcium stearate in water. It is easily miscible with water at all ratios. The calcium stearate is an excellent water-repellent agent. In waterborne printing i...Vea Mas OMBRELUB 533 is a white, turbid nonionic liquid, very finely dispersed and stable dispersion of calcium stearate in water. It is easily miscible with water at all ratios. The calcium stearate is an excellent water-repellent agent. In waterborne printing inks and external wood coatings OMBRELUB 533 is applied to increase waterproofing properties. OMBRELUB 533 is also recommended for the manufacture of concrete building components. Vea Menos | |
| PanSPERSE 900 | Pan Technology Inc. | PanSPERSE 900 is an environmentally friendly aqueous dispersing agent effective with most organic and inorganic pigments. It is solvent free and contains no alkylphenolethoxylates. Colorants made with PanSPERSE 900 are compatible with most waterborne coat...Vea Mas PanSPERSE 900 is an environmentally friendly aqueous dispersing agent effective with most organic and inorganic pigments. It is solvent free and contains no alkylphenolethoxylates. Colorants made with PanSPERSE 900 are compatible with most waterborne coatings and inks. PanSPERSE 900 is intended for use in making highly concentrated pigment dispersions for coloring conventional, low and zero VOC aqueous coatings and inks. Dispersions made with PanSPERSE 900 have exceptionally wide compatibility and can be used in both ambient cured and baking finishes. It can also be used to correct problems of floating and flocculation in finished coatings and inks. Vea Menos | |
| TEGO® Dispers 690 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 690 is a high molecular weight polymer used as a pigment wetting and dispersing additive. It is designed specifically for solventborne printing inks used in food packaging. By using this product in solventborne, PU-containing or binder-free ...Vea Mas TEGO® Dispers 690 is a high molecular weight polymer used as a pigment wetting and dispersing additive. It is designed specifically for solventborne printing inks used in food packaging. By using this product in solventborne, PU-containing or binder-free pigment dispersions, high pigment loadings can be achieved due to strong viscosity reduction. TEGO® Dispers 690 is highly compatible with various PU and NC binder types and works well with organic pigments, carbon blacks and titanium dioxide. It is also especially effective in gravure and flexo inks for lamination applications. Vea Menos | Request Sample |
| TEGO® Dispers 691 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 691 is a highly efficient polymeric wetting and dispersing additive for solventborne formulations. It gives outstanding wetting and stabilization to both organic and inorganic pigments in solventborne printing inks. | Request Sample |
| Troysperse™ 90W | Arxada – Troy Corporation | Troysperse™ 90W is a liquid dispersing and wetting additive for the dispersion of carbon black and organic pigments in aqueous Industrial Coatings and Prinking Ink applications. Troysperse™ 90W is recommended for applications where waste effluent is contr...Vea Mas Troysperse™ 90W is a liquid dispersing and wetting additive for the dispersion of carbon black and organic pigments in aqueous Industrial Coatings and Prinking Ink applications. Troysperse™ 90W is recommended for applications where waste effluent is controlled to insure no product release to water. Vea Menos | Request Sample |
| Troysperse™ W | Arxada – Troy Corporation | Troysperse™ W is a pigment dispersant and wetting agent for aqueous systems. Troysperse™ W promotes liquid amphoteric wetting and dispersing aid for dispersion of all types of pigments in waterborne coatings, color concentrates and printing inks. | Request Sample |
| ZetaSperse® 2500 Pigment Dispersing Additive | Evonik Operations GmbH, BL Coating Additives | Diseñado para mojar, dispersar, y estabilizar una variedad de químicos de pigmento orgánico, y dar rendimiento excepcional en tipos de sal de metal rojo. Ofrece una combinación optimizada de mecanismos de humectación y estabilización para sistemas acuo...Vea Mas Diseñado para mojar, dispersar, y estabilizar una variedad de químicos de pigmento orgánico, y dar rendimiento excepcional en tipos de sal de metal rojo. Ofrece una combinación optimizada de mecanismos de humectación y estabilización para sistemas acuosos. Vea Menos | Request Sample |
| ZetaSperse® 3100 Pigment Dispersing Additive | Evonik Operations GmbH, BL Coating Additives | Diseñado para mojar, dispersar, y estabilizar una amplia gama de químicos de pigmento y de relleno, con rendimiento excepcional para las dispersiones de carbono negro. Basado e tecnología de dispersantes poliméricos, tiene características que permiten in...Vea Mas Diseñado para mojar, dispersar, y estabilizar una amplia gama de químicos de pigmento y de relleno, con rendimiento excepcional para las dispersiones de carbono negro. Basado e tecnología de dispersantes poliméricos, tiene características que permiten interacciones fuertes con una variedad de químicos para la superficie de pigmentos. Vea Menos | Request Sample |
| ZetaSperse® 3700 Pigment Dispersing Additive | Evonik Operations GmbH, BL Coating Additives | Diseñado para mojar, dispersar, y estabilizar pigmentos orgánicos de alto rendimiento y problemática. Basado en un nuevo dispersor polimérico, ha sido creado para maximizar afinidad con químicos de superficie de pigmento especifico. | Request Sample |
| ZetaSperse® 3800 Dispersant | Evonik Operations GmbH, BL Coating Additives | ZetaSperse® 3800 dispersant is formulated to provide strong stabilization of pigments, fillers, and other solids in aqueous dispersion. Based on a moderate molecular weight comb polymer, ZetaSperse® 3800 dispersant offers robust steric stabilization suit...Vea Mas ZetaSperse® 3800 dispersant is formulated to provide strong stabilization of pigments, fillers, and other solids in aqueous dispersion. Based on a moderate molecular weight comb polymer, ZetaSperse® 3800 dispersant offers robust steric stabilization suitable for a wide range of formulation characteristics. Vea Menos | Request Sample |
