| 1- Or 2-Component Wash Primer (Formulation #4.1.1) | GRACE | 1- Or 2-Component Wash Primer (Formulation #4.1.1) is a guideline formulation used to exhibit the equivalent performance for SHIELDEX® anti-corrosive pigments compared to a commercial wash primer based on zinc tetroxychromate. The modified epoxy resin Beck...Vea Mas 1- Or 2-Component Wash Primer (Formulation #4.1.1) is a guideline formulation used to exhibit the equivalent performance for SHIELDEX® anti-corrosive pigments compared to a commercial wash primer based on zinc tetroxychromate. The modified epoxy resin Beckopox EM 460 is recommended in combination with the standard polyvinylbutyral resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium. The formulation can also be used as a one-component system. In this case, Part B is premixed and subsequently added to part A after dispersion. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 – 15 microns by bar coater. The formulation was also tested with a 40 micron acrylic/isocyanate top coat. Vea Menos | |
| 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) | GRACE | 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) is a guideline formulation offered to illustrate the key features of SHIELDEX® AC 3 Anti-Corrosive Pigment. Beckopox EM 460 together with Phenodur PR 263 is recommended in combination wit...Vea Mas 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) is a guideline formulation offered to illustrate the key features of SHIELDEX® AC 3 Anti-Corrosive Pigment. Beckopox EM 460 together with Phenodur PR 263 is recommended in combination with the standard resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium substrates. The combination of Alcophor 827 with SHIELDEX® anti-corrosive pigments improves hot salt spray resistance over steel substrates. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 –15 μm by bar coater. The formulation was also tested with a 40 micron acrylic/isocyanate top coat. Drying was for 7 days at ambient conditions. Vea Menos | |
| 2K polyurethane topcoat, high solid, white (Formulation #16063MS) | Hoffmann Mineral | This formulation utilizes AKTIFIT PF 111. | |
| Anti-Corrosion Coating (Formulation #R24404.1) | Hoffmann Mineral | Recubrimiento anticorrosiva | |
| Anti-Corrosion Primer for High Requirements (Formulation #407-04) | Hoffmann Mineral | Pintura base anticorrosiva para los altos requerimientos | |
| Anti-Corrosion Primer for High Requirements (Formulation #R 24403 C) | Hoffmann Mineral | Pintura base anticorrosiva para los altos requerimientos | |
| Anti-Corrosion Primer for High Requirements (Formulation #R 24403 D) | Hoffmann Mineral | Pintura base anticorrosiva para los altos requerimientos | |
| Anti-Corrosion Primer for High Requirements (Formulation #R24403 A) | Hoffmann Mineral | Pintura base anticorrosiva para los altos requerimientos | |
| Anti-Corrosion Primer (Formulation #R 24301.1) | Hoffmann Mineral | Pintura base anticorrosiva | |
| Coil Coating Primer (Formulation #T 24402.1) | Hoffmann Mineral | Pintura base recubrimiento de bobinas | |
| Coil Coating Topcoat (Formulation #T 24401.1 B) | Hoffmann Mineral | Capa final recubrimiento de bobinas | |
| Coil Coating Topcoat (Formulation #T 24401.1A) | Hoffmann Mineral | Capa final recubrimiento de bobinas | |
| Heat Resistant Anti-Corrosive Paint up to 650°C (Formulation #R21401.0 [1]) | Hoffmann Mineral | Pintura anticorrosiva resistente al calor | |
| Nubirox 106 in SB 2K Epoxy Primer (Formulation #EPPA 16711) | Ferro Pigments | This epoxy primer features Nubirox 106. | |
| Nubirox 106 in SB Alkyd Primer (Formulation #AC 10433) | Ferro Pigments | This alkyd primer features Nubirox 106. | |
| Nubirox 213 in SB 2K Epoxy-Polyamide Primer (Formulation #EPPA 12883) | Ferro Pigments | This SB 2K epoxy-polyamide primer features Nubirox 213. | |
| Nubirox 302 in SB 2K Epoxy-polyamide Primer (Formulation #EPPA19852) | Ferro Pigments | This SB 2K Epoxy-polyamide Primer features Nubirox 302. | |
| Nubirox 302 in Solvent Based DTM Alkyd System (Formulation #AC 19630) | Ferro Pigments | This solvent based DTM alkyd system features Nubirox 302. | |
| Nubirox SP in SB Alkyd Primer (Formulation #AC 10430) | Ferro Pigments | This SB Alkyd Primer features Nubirox SP. | |
| Organic Zinc Rich Primer | Huntsman Performance Products | Zinc primers, developed to protect structural steel, offer excellent corrosion resistance when used either as preconstruction primers or as top-coated primers. |
