| 1- Or 2-Component Wash Primer (Formulation #4.1.1) | GRACE | 1- Or 2-Component Wash Primer (Formulation #4.1.1) is a guideline formulation used to exhibit the equivalent performance for SHIELDEX® anti-corrosive pigments compared to a commercial wash primer based on zinc tetroxychromate. The modified epoxy resin Beck...Vea Mas 1- Or 2-Component Wash Primer (Formulation #4.1.1) is a guideline formulation used to exhibit the equivalent performance for SHIELDEX® anti-corrosive pigments compared to a commercial wash primer based on zinc tetroxychromate. The modified epoxy resin Beckopox EM 460 is recommended in combination with the standard polyvinylbutyral resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium. The formulation can also be used as a one-component system. In this case, Part B is premixed and subsequently added to part A after dispersion. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 – 15 microns by bar coater. The formulation was also tested with a 40 micron acrylic/isocyanate top coat. Vea Menos | |
| 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) | GRACE | 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) is a guideline formulation based on Dynapol L205 (high molecular weight polyester resin) crosslinked with Desmodur BL 3175 (a blocked isocyanate). Dabco T12 (dibutyltindilaurate) was used as the c...Vea Mas 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) is a guideline formulation based on Dynapol L205 (high molecular weight polyester resin) crosslinked with Desmodur BL 3175 (a blocked isocyanate). Dabco T12 (dibutyltindilaurate) was used as the catalyst. SHIELDEX® C 303 is a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. The 1-Pack-Polyurethane primer was tested on Bonder 1303 treated galvanised steel test panels (ex Chemetall) at a bar coated dry film thickness of 5 microns. Cure was to a peak metal temperature (PMT) of 224 °C. A polyester-melamine topcoat was applied to a bar coated dry film thickness of 20 – 25 microns and cured to a PMT of 232 °C. Vea Menos | |
| 100 G/L Black High Gloss Enamel (Formulation #2512 BLK ST-1) | EPS Materials | 100 G/L Black High Gloss Enamel (Formulation #2512 BLK ST-1) formulation information. | |
| 100 G/L High Gloss White Enamel (Formulation #EPS 2548 WHT ST-1) | EPS Materials | 100 G/L High Gloss White Enamel (Formulation #EPS 2548 WHT ST-1) formulation information. | |
| 100 G/L White Corrosion Resistant Primer (Formulation #EPS 2548 WHT SP-1) | EPS Materials | 100 G/L White Corrosion Resistant Primer (Formulation #EPS 2548 WHT SP-1) formulation information. | |
| 100 G/L White High Gloss Enamel (Formulation #EPS 2512 WHT ST-1) | EPS Materials | This is a 100 G/L White High Gloss Enamel (Formulation #EPS 2512 WHT ST-1). | |
| 150 g/l VOC Exterior Eggshell House Paint (Formulation #4110-001) | BASF Dispersions & Resins | This exterior eggshell house paint features Acronal® 4110. | |
| 1K Acrylic White Topcoat Industrial Coatings (Formulation #SPF_CTG_001_2203) | Arkema Rheology & Specialty Additives | This acrylic white topcoat features Coadis™ 790 and Coapur™ XS 83. | |
| 1K Hydro Soft Feel Lacquer, Black (Formulation #PCO-0059SF) | Hoffmann Mineral | Recubrimiento industrial 1K Hidro laca tacto suave, negro sin agente mateado a base de ureas metanal condensadoBayhydrol UH 340/1// UH 650. | |
| 1K Stoving Soft Feel Lacquer (Formulation #RR 87) | Hoffmann Mineral | Recubrimiento industrial 1K estufado laca tacto suave, gris, mate Desmophen 1652 y Desmodur BL 3175 usando SILLITIN Z 86. | |
| 1K Stoving Soft Feel Lacquer (Formulation #RR 88) | Hoffmann Mineral | Laca siente suave estufado 1K | |
| 1K Water-Based Primer Surfacer for Automotive Refinish | BASF Dispersions & Resins | This water-based primer surfacer is for automotive refinishing. It features low VOC content, quick sanding times, and good direct-to-metal performance. | |
| 1K WB Say Clearcoat DTM - Waterborne Acrylic Clear-Coat Based on MAINCOTE HG100, ASCONIUM® 142DA and ASCOTRAN® H10 (Formulation #00002-A) | ASCOTEC | Based on MAINCOTE HG-100. | |
| 2 Pack Water Base Epoxy Anti-Corrosion Primer (Formulation #2106) | ICL Phosphate Specialty | 2-Pack Water-based Epoxy Primer using HALOX® SW-111 | |
| 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) | GRACE | 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) is a guideline formulation offered to illustrate the key features of SHIELDEX® AC 3 Anti-Corrosive Pigment. Beckopox EM 460 together with Phenodur PR 263 is recommended in combination wit...Vea Mas 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) is a guideline formulation offered to illustrate the key features of SHIELDEX® AC 3 Anti-Corrosive Pigment. Beckopox EM 460 together with Phenodur PR 263 is recommended in combination with the standard resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium substrates. The combination of Alcophor 827 with SHIELDEX® anti-corrosive pigments improves hot salt spray resistance over steel substrates. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 –15 μm by bar coater. The formulation was also tested with a 40 micron acrylic/isocyanate top coat. Drying was for 7 days at ambient conditions. Vea Menos | |
| ≤275 G/L Satin Varnish (Formulation #EPS 4431BT4) | EPS Materials | This is a ≤275 G/L Satin Varnish (Formulation #EPS 4431BT4). | |
| 2K Epoxy Primer Surfacer For Trains (Formulation #L00046.1) | Hoffmann Mineral | 2K Epoxy Primer Surfacer For Trains is a water-based solid, epoxy resin, and hydrophobic amine. It features anti-corrosion and good sandability. | |
| 2K High Solids Epoxy Primer (Formulation #828) | ICL Phosphate Specialty | 2K High Solids Epoxy Primer using HALOX® 750 | |
| 2K Industrial White Paint for Steel (Formulation #SPF_CTG_004_2203) | Arkema Rheology & Specialty Additives | This industrial white steel paint features Coadis™ 790 & Coapur™ XS 71. | |
| 2K Pigmented Polyurethane Coating (Formulation #API-15) | King Industries, Inc. | This formulation is for a pigmented 2-component acrylic urethane coating with improved flexibility and lower VOC content. | |
| 2K Pigmented Polyurethane Coating (Formulation #API-16) | King Industries, Inc. | This formulation is for a pigmented 2-component acrylic urethane coating with improved flexibility, lower VOC content, and high hardness. | |
| 2K Pigmented Polyurethane Coating (Formulation #API-17) | King Industries, Inc. | This formulation is for a pigmented 2-component acrylic urethane coating with improved flexibility, lower VOC content, and high hardness. | |
| 2K Polyamide Cured Epoxy Red Iron Oxide Primer (Formulation #1001-X-75) | ICL Phosphate Specialty | 2K Polyamide Cured Epoxy Red Iron Oxide Primer using HALOX® BW-111 | |
| 2K polyurethane topcoat, high solid, white (Formulation #16063MS) | Hoffmann Mineral | This formulation utilizes AKTIFIT PF 111. | |
| 2K PU Clearcoat Based on BASF Joncryl 906 and Bayer Desmodur N 3300 (Formulation #API-14) | King Industries, Inc. | This formulation is for a 2-component acrylic urethane clearcoat with improved abrasion and impact resistance. | |
| 2K PU Heavy Duty Protective Coating (Formulation #Inz 2/LV Clear - 001) | Incorez Ltd. | Esta formulación es una capa transparente de acabado de automóviles usando la línea de productos Incozol. | |
| 2K PU Heavy Duty Protective Coating (Formulation #Inz 2/LV White - 002) | Incorez Ltd. | Esta formulación es para un capa blanco de alta resistencia utilizando la línea de productos Incozol. | |
| 2K PU Topcoat for plastics (Formulation #I 24403.1) | Hoffmann Mineral | Partial replacement of titanium dioxide. Features SILFIT Z 91 or AKTIFIT PF 111. | |
| 2K PU Waterborne Paint (Formulation #SPF_CTG_002_2203) | Arkema Rheology & Specialty Additives | This waterborne paint features Coadis™ 790 & Coapur™ XS 71. | |
| 2K Soft Feel Lacquer, Black (Formulation #RR 62) | Hoffmann Mineral | 2K Laca tacto suave, negro | |
| 2K Soft Feel Lacquer (Formulation #K24402.0) | Hoffmann Mineral | 2K Laca tacto suave | |
| 2K Soft Feel Lacquer (Formulation #PCO-0017e-SF) | Hoffmann Mineral | 2K Laca tacto suave | |
| 2K Solvent Base Polyester / Urethane DTM Enamel (Formulation #A-75) | ICL Phosphate Specialty | 2K Solvent-based Polyester / Urethane DTM Enamel using HALOX® 630 | |
| 2K Wash Primer (Formulation #B-90) | ICL Phosphate Specialty | 2K Wash Primer based on BUTVAR B-90 using HALOX® SZP-391 JM & HALOX® 550 | |
| 2K Waterborne Floor Paint - Matt Grey (Formulation #142 - 024) | Incorez Ltd. | Esta formulación es una pintura gris mate planta que utiliza Incorez 142. | |
| 2K Waterborne Floor Paint - Semi-Glossy Red (Formulation #148/024 - 023) | Incorez Ltd. | This formulation is for a red gloss floor paint that utilizes the product Amirez 148/024. | |
| 2K Waterborne Floor Paint - Semi-Glossy Red (Formulation #148/024 - 025) | Incorez Ltd. | Esta formulación es una pintura del piso de color rojo brillante que utiliza el producto Incorez 148/024. | |
| 2K Waterborne Polyurethane (Formulation #VP 2235 1) | ICL Phosphate Specialty | 2K Water-based Polyurethane using HALOX® SZP-391 | |
| 2K Waterborne Primer - Clear (Formulation #148/010 - 016) | Incorez Ltd. | Esta formulación es una base de pintura clara de hormigón para dos sistemas epoxi a base de agua de carga. Cuenta con una excelente adherencia, alto brillo, una vida útil larga, y utiliza el producto Incorez 148/010. | |
| 2K Waterborne Primer - Clear (Formulation #148/024 - 017) | Incorez Ltd. | Esta formulación es una pintura base clara de hormigón para dos sistemas epoxi a base de agua de carga. Ofrece una excelente adherencia, alto brillo, buena dureza, secado más rápido y utiliza el producto Incorez 148/024. | |
| 2K Waterborne PUR (Formulation #A-145) | ICL Phosphate Specialty | 2K Water-based PUR based on BAYHYDROL A-145/ DESMODUR XP 2410 using HALOX® 430 & 550 | |
| 2K Waterborne Sealer - Clear (Formulation #142 - 019) | Incorez Ltd. | Esta formulación es un claro sellador de concreto para sistemas epoxi a base de agua. Ofrece alto brillo, excelente dureza, buena resistencia química y al agua que utiliza el producto Incorez 142. | |
| 2K Waterborne Sealer - Clear (Formulation #148/024 - 018) | Incorez Ltd. | Esta formulación es un claro sellador de concreto que cuenta con un alto brillo, buena dureza, excelente resistencia química y al agua que utiliza Incorez 148/024. | |
| 2K Waterborne Wall Paint - White (Formulation #142/148-024 - 022) | Incorez Ltd. | This white waterborne wall paint features Amirez 142 and Amirez 148/024. | |
| 2K Wood Primer (Formulation #RR 3.17) | Hoffmann Mineral | 2K Pintura Base madera | |
| 2K Wood Primer, Pigmented (Formulation #RR 3.20) | Hoffmann Mineral | 2K Pintura base madera, pigmentado | |
| 2K-Hydro soft feel lacquer, black (Formulation #PCO SF-0042-TC) | Hoffmann Mineral | This formulation utilizes SILLITIN Z 86. | |
| 2K-Hydro soft feel lacquer, black (Formulation #SF-0025e-TC) | Hoffmann Mineral | This formulation utilizes SILLITIN Z 86. | |
| 40 PVC Red Oxide Spray Primer (Formulation #EPS® 2540 ROX SP-1) | GRACE | 40 PVC Red Oxide Spray Primer (Formulation #EPS® 2540 ROX SP-1) is a suggested paint formulation offered to assist the paint formulator in achieving the high performance properties offered by EPS® 2540. | |
| 40 PVC White DTM Primer (Formulation #EPS 2535 SP-3) | EPS Materials | 40 PVC White DTM Primer (Formulation #EPS 2535 SP-3) formulation information. | |
| 40 PVC White DTM Primer (Formulation #EPS® 2535 SP-3) | GRACE | 40 PVC White DTM Primer (Formulation #EPS® 2535 SP-3) is a suggested paint formulation offered to assist the paint formulator in achieving the high performance properties offered by EPS® 2535. | |
| 40 PVC White DTM Primer (Formulation #EPS® 2560 SP-1) | GRACE | 40 PVC White DTM Primer (Formulation #EPS® 2560 SP-1) is a suggested paint formulation offered to assist the paint formulator in achieving the high performance properties offered by EPS® 2560. | |
| ACRONAL® PLUS 4415 Stain Blocking Primer | BASF Dispersions & Resins | Acronal PLUS 4415 is a styrene-acrylic latex for interior and exterior stain blocking primers at 50 g/L VOC. The latex can be widely applied, offering consistent, high-quality results for both interior and exterior primers. Acronal PLUS 4415 demonstrates ...Vea Mas Acronal PLUS 4415 is a styrene-acrylic latex for interior and exterior stain blocking primers at 50 g/L VOC. The latex can be widely applied, offering consistent, high-quality results for both interior and exterior primers. Acronal PLUS 4415 demonstrates limited ropes and flakes during sanding and excellent interior stain control. This latex further outperforms commercial products in both adhesion and alkali resistance. Acronal PLUS 4415 is the solution for the premium stain blocking primer market. Vea Menos | |
| Acrylic Tannin Stain-blocking Primer with Busan® 11-M1 | Buckman Laboratories, Inc. | This formulation uses Busan® 11-M1 with other Buckman products to create an acrylic tannin stain-blocking primer. | |
| Alkali Resistant Waterbased Primer (Formulation #4641-010) | BASF Dispersions & Resins | This alkali resistant waterbased primer to meet MPI #3 and features Acronal PLUS® 4641. | |
| Alkyd Modified Acrylic Latex DTM Primer (Formulation #121813) | Vanderbilt Minerals, LLC | A formulation for an alkyd modified acrylic latex DTM primer which utilizes VAN GEL® SX, DARVAN® CN, BILT-PLATES® 156, and ACTIV-8®. | |
| Alkyd Modified Acrylic Latex Maintenance Primer (Formulation #120313) | Vanderbilt Minerals, LLC | A formulation for an alkyd modified acrylic latex maintenance primer which utilizes VAN GEL® ES, DARVAN® 7N, and ACTIV-8®. | |
| Aluminum Silicate, Extender Slurries (Formulation #21-10006) | Patcham USA | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...Vea Mas Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. Vea Menos | |
| Anquamine 401: Preliminary Primer (Formulation #3515) | ICL Phosphate Specialty | 2K Water-based Epoxy Primer with HALOX® SW-111 cured with Anquamine 401 | |
| Anti-corrosion 2K epoxy clear coat, water-based (Formulation #L 00001.1) | Hoffmann Mineral | This formulation utilizes AKTISIL AM, SILLITIN Z 89, and SILFIT Z 91. | |
| Anti-corrosion 2K epoxy clearcoat, water-based, gray (Formulation #NC2260DB) | Hoffmann Mineral | This formulation utilizes AKTISIL AM. | |
| Anti-corrosion 2K epoxy clearcoat, water-based, gray (Formulation #NC2260DIN12944-6) | Hoffmann Mineral | This formulation utilizes AKTISIL AM. | |
| Anti-corrosion 2K epoxy monocoat, water-based, black (Formulation #OT 2265/01) | Hoffmann Mineral | This formulation utilizes SILLITIN Z 86. | |
| Anti-Corrosion Coating (Formulation #R24404.1) | Hoffmann Mineral | Recubrimiento anticorrosiva | |
| Anti-corrosion coating, water-based, white (Formulation #L 00012.1) | Hoffmann Mineral | This formulation utilizes SILLITIN Z 89 and AKTIFIT Q. | |
| Anti-Corrosion Primer for High Requirements (Formulation #407-04) | Hoffmann Mineral | Pintura base anticorrosiva para los altos requerimientos | |
| Anti-Corrosion Primer for High Requirements (Formulation #R 24403 C) | Hoffmann Mineral | Pintura base anticorrosiva para los altos requerimientos | |
| Anti-Corrosion Primer for High Requirements (Formulation #R 24403 D) | Hoffmann Mineral | Pintura base anticorrosiva para los altos requerimientos | |
| Anti-Corrosion Primer for High Requirements (Formulation #R24403 A) | Hoffmann Mineral | Pintura base anticorrosiva para los altos requerimientos | |
| Anti-corrosion primer for sandblasted steel, water-based (Formulation #RRS 2176) | Hoffmann Mineral | This formulation utilizes SILLITIN Z 89. | |
| Anti-Corrosion Primer (Formulation #R 24301.1) | Hoffmann Mineral | Pintura base anticorrosiva | |
| Anti-corrosion primer, water-based, red (Formulation #L 00014.2 [3]) | Hoffmann Mineral | This formulation utilizes AKTIFIT PF 115. | |
| Anticorrosion Primer (Formulation #EP 384) | ICL Phosphate Specialty | High Performance 2K Water-based Epoxy Primer with HALOX® SW-111 based on BECKOPOX EP 384 | |
| Anticorrosive Primer and Topcoat (Formulation #1455) | ICL Phosphate Specialty | 2K Water-based Solid Epoxy Primer with HALOX® CW-491 and BASF® ALCOPHOR 827 Synergy | |
| Automotive Quick Dry Clearcoat | BASF Dispersions & Resins | This is a starting formulation for spot and small panel sized automotive repairs. | |
| Automotive Quick Dry Primer Surfacer | BASF Dispersions & Resins | This is a starting formulation for spot and small panel sized automotive repairs. | |
| Automotive Refinish: Quick Dry Water-based Primer Surfacer | BASF Dispersions & Resins | This is a water-based 1K automotive refinish primer surfacer formulation featuring Joncryl® PRO 1525. | |
| Basic Satin Paint for Titanium Dioxide Study (Formulation #296-027) | BASF Dispersions & Resins | This basic satin paint features Acronal® 296 D. | |
| Black High Gloss DTM Enamel (Formulation #EPS 2535 BLK ST1) | EPS Materials | This is a Black High Gloss DTM Enamel (Formulation #EPS 2535 BLK ST1). | |
| C-1315 Cure and Seal (Formulation #EPS 2272 CS1) | EPS Materials | This is a C-1315 Cure and Seal (Formulation #EPS 2272 CS1). | |
| C-1315 Cure and Seal Low VOC (Formulation #EPS 2272 CS2) | EPS Materials | This is a C-1315 Cure and Seal Low VOC (Formulation #EPS 2272 CS2). | |
| Calcium Carbonate, Extender Slurries (Formulation #21-10006) | Patcham USA | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...Vea Mas Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm/ gauge 7+ NS. Vea Menos | |
| Casting and Encapsulation | Huntsman Performance Products | An encapsulated object is totally enclosed in some medium. Potting usually refers to a system in which there is a container around an encapsulated part. A casting has no container, but may be poured into a void, such as a mold, and then removed after comp...Vea Mas An encapsulated object is totally enclosed in some medium. Potting usually refers to a system in which there is a container around an encapsulated part. A casting has no container, but may be poured into a void, such as a mold, and then removed after complete curing. Vea Menos | |
| Ceiling Paint (Formulation #051414) | Vanderbilt Minerals, LLC | A ceiling paint which utilizes the products DARVAN® 7-N Dispersant, PYRAX® ABB Pyrophyllite, and VANSIL® W-20 Wollastonite. | |
| Cherry Interior Wiping Stain (Formulation #EPS 2545 STN1) | EPS Materials | Cherry Interior Wiping Stain (Formulation #EPS 2545 STN1) formulation information. | |
| Chlorinated Rubber High-Build Marine Coating (Base Coat) | Yuron New Material | This formulation is used as the first coating on ships or steel construction. It has excellent water and corrosion resistance with outstanding durability. | |
| Chlorinated Rubber High-Build Marine Coating (Top Coat) | Yuron New Material | This formulation is used as protection and decoration on the hull, ship superstructure, freeboard, and other construction surfaces. It has excellent weather resistance, durability, and water resistance. The matching primer is aqueous phase chlorinated rub...Vea Mas This formulation is used as protection and decoration on the hull, ship superstructure, freeboard, and other construction surfaces. It has excellent weather resistance, durability, and water resistance. The matching primer is aqueous phase chlorinated rubber primer or aqueous phase chlorinated rubber aluminum primer. Vea Menos | |
| CHLORINATED RUBBER Road Marking Paint Suggested Formulation | Yuron New Material | Se trata de una fórmula propuesta para la creación de una pintura de señalización vial. Incluye una solución en tolueno caucho clorado 50%. | |
| Chromate Free 1K Epoxy Etch Primer (Formulation #B-30 H) | ICL Phosphate Specialty | Chromate-Free 1K Epoxy Etch Primer using HALOX® CW-491 | |
| Chromate Free 2K Epoxy Phenolic Etch Primer using HALOX SZP JM and HALOX 550 (Formulation #30-HH) | ICL Phosphate Specialty | Chromate Free 2K Epoxy Phenolic Etch Primer using HALOX® SZP 391 JM & HALOX® 550 | |
| Chromate-Free 2K Epoxy Phenolic Etch Primer using HALOX 430 JM & HALOX 550 (Formulation #30-HH) | ICL Phosphate Specialty | Chromate-Free 2K Epoxy Phenolic Etch Primer using HALOX® 430 JM & HALOX® 550 | |
| Clear Acrylic Lacquer for Brass (Formulation #B-66) | ICL Phosphate Specialty | HALOX® 630 in a Clear Acrylic Lacquer for Brass | |
| Clear Alkyd Varnish (Formulation #032100) | Vanderbilt Minerals, LLC | A clear alkyd varnish utilizing ACTIV-8® drier accelerator. | |
| Clear coat for furniture, water-based, preferably as base and intermediate coat (Formulation #I 13401.1) | Hoffmann Mineral | This formulation utilizes SILLITIN V 88 and SILLITIN Z 89. | |
| Clear coat [multilayer], water-based, matte, preferably for wood (Formulation #L00006.1) | Hoffmann Mineral | This formulation utilizes GLOXIL WW SL. | |
| Clear Interior Topcoat with EPS® 2436 | EPS Materials | EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings. | |
| Clear Satin Wood Finish (Formulation EPS 4216 SATIN1) | EPS Materials | This formulation produces a clear, satin wood finish. It features the product EPS® 4216. | |
| Clear Tint Base (Formulation #EPS 2545 CLR) | EPS Materials | Clear Tint Base (Formulation #EPS 2545 CLR) formulation information. | |
| Coal Tar Epoxy | Huntsman Performance Products | Coal tar-modified epoxy coatings are frequently used to line water tanks and to coat bridges, decks, and pipelines. They offer corrosion protection from water, acids, alkalies, salts, and some solvents. | |
| Coating For Plastics, Black, Sprayable (Formulation #K20103.2 [6]) | Hoffmann Mineral | Recubrimiento para plásticos, negro, sprayable |
