| N3D-I250 | Sartomer Americas | N3D-I250 is a polycarbonate based urethane acrylate specifically designed with a particular modulus range for improved mechanical durability. It’s polycarbonate backbone provides rigidity while an increased MW provides low volumetric shrinkage and thermop...Vea Mas N3D-I250 is a polycarbonate based urethane acrylate specifically designed with a particular modulus range for improved mechanical durability. It’s polycarbonate backbone provides rigidity while an increased MW provides low volumetric shrinkage and thermoplastic-like material trends. Vea Menos | |
| GENOMER* 4515 | Rahn USA Corp. | GENOMER* 4515 is an amine-modified aromatic urethane acrylate. Formulations containing GENOMER* 4515 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4515 reduces oxygen inhibition in 3D topdown printin...Vea Mas GENOMER* 4515 is an amine-modified aromatic urethane acrylate. Formulations containing GENOMER* 4515 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4515 reduces oxygen inhibition in 3D topdown printing. GENOMER* 4515 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. Vea Menos | Request Sample |
| GENOMER* 4215/M22 | Rahn USA Corp. | GENOMER* 4215/M22 is an aliphatic polyester urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic fo...Vea Mas GENOMER* 4215/M22 is an aliphatic polyester urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC, PE etc.); PVC flooring; industrial coatings and adhesives; and plastic varnishes. Vea Menos | Request Sample |
| StanChem SC 6445 | StanChem Polymers | StanChem SC 6445 is an acrylic copolymer emulsion that exhibits excellent UV resistance, good solvent resistance, good pigment binding and SC 6445 being carboxylated, can be cross-linked with melamine. | Request Sample |
| SR489D | Sartomer Americas | SR489D, acrilato de tridecilo, es un acrilato monofuncional de baja viscosidad, poco olor, baja irritación para la piel, con bajo contenido en ésteres. Las propiedades de rendimiento incluyen: buena resistencia al agua, alta flexibilidad, alta resistencia...Vea Mas SR489D, acrilato de tridecilo, es un acrilato monofuncional de baja viscosidad, poco olor, baja irritación para la piel, con bajo contenido en ésteres. Las propiedades de rendimiento incluyen: buena resistencia al agua, alta flexibilidad, alta resistencia al impacto y baja contracción. Las aplicaciones sugeridas incluyen: adhesivos, adhesivos sensibles a la presión, revestimientos y tintas. Vea Menos | |
| Bayhydrol® HD 2017 | Covestro | Bayhydrol® HD 2017 is a hydroxyl-functional acrylic resin dispersed in water with approximately 1% co-solvent. It can be used as a coreactant for Bayhydur® water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. | |
| CN2303 | Sartomer Americas | CN2303 es un oligómero de acrilato de poliéster hiperramificado diseñado con baja viscosidad y alta funcionalidad. CN2303 presenta baja viscosidad y curado rápido de las superficies. CN2303 es adecuado para tintas, revestimientos duros y revestimientos de...Vea Mas CN2303 es un oligómero de acrilato de poliéster hiperramificado diseñado con baja viscosidad y alta funcionalidad. CN2303 presenta baja viscosidad y curado rápido de las superficies. CN2303 es adecuado para tintas, revestimientos duros y revestimientos de plástico y a base de agua curados con UV/EB. Vea Menos | |
| CN2304 | Sartomer Americas | CN2304 es un oligómero de acrilato de poliéster hiperramificado diseñado con baja viscosidad y alta funcionalidad. CN2304 presenta baja viscosidad y curado rápido de las superficies. CN2304 es adecuado para tintas, revestimientos duros y revestimientos de...Vea Mas CN2304 es un oligómero de acrilato de poliéster hiperramificado diseñado con baja viscosidad y alta funcionalidad. CN2304 presenta baja viscosidad y curado rápido de las superficies. CN2304 es adecuado para tintas, revestimientos duros y revestimientos de plástico y a base de agua curados con UV/EB. Vea Menos | |
| ACRONAL® 4053 X | BASF Dispersions & Resins | Acronal® 4053 X is a water-based dispersion polymer for liquid applied sound damping (LASD) application. It is a medium Tg acrylic dispersion polymer. It has a lower viscosity than Acronal® DS 3502 for easier handling and blending. | |
| UVU6305 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...Vea Mas UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. Vea Menos | |
| Humocer® 100 A 45 TM EX | Isogama Industria Quimica Ltda. | Humocer® 100 A 45 TM EX is a water repellent additive, applied as beating of water, lubricant and lifting of pattern agent in the inks and internal and external coverings. It is based on water beyond the masses with base acrylic resins and PVA. | |
| MAINCOTE™ HG-54D | Univar Solutions | MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial mainten...Vea Mas MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial maintenance markets. Vea Menos | Request Sample |
| RHOPLEX™ AC-261 LF | Univar Solutions | RHOPLEX™ AC-261 LF is an all-acrylic emulsion polymer for latex floor paints. Its adhesion and abrasion resistance have been designed for this application. It is also suitable for quality exterior semi-gloss trim paints. | Request Sample |
| RHOPLEX™ AC-347 | Univar Solutions | RHOPLEX™ AC-347 is a 100% acrylic vehicle developed for use in interior and exterior semigloss paints. It has excellent adhesion and abrasion resistance, along with very good flow and leveling, and gloss with both dry and slurry paints. | Request Sample |
| RHOPLEX™ SG-30 | Univar Solutions | RHOPLEX™ SG-30 is a 100% acrylic emulsion designed to meet 150 g/L VOC for semigloss interior and exterior architectural paints, while maintaining key properties of conventional higher VOC semigloss architectural paints. | Request Sample |
| GENOMER* 3364 | Rahn USA Corp. | GENOMER* 3364 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coat...Vea Mas GENOMER* 3364 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coatings; and printing inks and varnishes for plastic foils. Vea Menos | Request Sample |
| Nuevo! GENOMER* 4281 | Rahn USA Corp. | GENOMER* 4281 is a medium viscosity, bio-based urethane acrylate resin for radically curable inks, coatings, adhesives, and 3D printing. Exhibiting low colour and an excellent combination of hardness and flexibility. | Request Sample |
| AR-400 | Chan Sieh Enterprises Co, Ltd. | AR-400 is a vinyl acetate acrylic copolymer adhesive resin in the form of a white emulsion. This product offers excellent water-resistance and adhesive strength. It can be used to laminate aluminum onto paper. | |
| 2-Propylheptanol | Perstorp | 2-Propylheptanol is a branched C10 fatty alcohol used as raw material for lubricants and acrylates in adhesives applications. | |
| SHIKOH™ UV-NS001 | Nippon Gohsei | SHIKOH™ UV-NS001 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring medium adhesion and good initial adhesion. This product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. | |
| UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...Vea Mas UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. Vea Menos | |
| GENOMER* 3497 | Rahn USA Corp. | GENOMER* 3497 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes, screen inks and varnishes, overprint varnishes, wood coat...Vea Mas GENOMER* 3497 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes, screen inks and varnishes, overprint varnishes, wood coatings, printing inks and varnishes for plastic foils and protective coatings for metals. Vea Menos | Request Sample |
| Rheotech™ 2000 | Arkema Rheology & Specialty Additives | Rheotech™ 2000 is an acrylic associative thickener for water-based systems (also called HASE). It imparts a newtonian behaviour and is highly effective is silk and flat emulsion paints. It provides an excellent balance between high and low shear viscositi...Vea Mas Rheotech™ 2000 is an acrylic associative thickener for water-based systems (also called HASE). It imparts a newtonian behaviour and is highly effective is silk and flat emulsion paints. It provides an excellent balance between high and low shear viscosities and an excellent compatibility with most organic pigments. Vea Menos | Request Sample |
| Texicryl® 13-220 | Scott Bader | Texicryl® 13-220 is a self cross-linking acrylic copolymer emulsion that has a soft, flexible film after curing, providing a good resistance to washing on printed textiles. It offers good binding properties for pigments, making it ideal for pigment printi...Vea Mas Texicryl® 13-220 is a self cross-linking acrylic copolymer emulsion that has a soft, flexible film after curing, providing a good resistance to washing on printed textiles. It offers good binding properties for pigments, making it ideal for pigment printing on flat screen and rotary systems. Texicryl® 13-220 also offers good adhesion on most substrates, with flexibility also ideal at low temperatures. Texicryl® 13-220 is suitable for the making of non-woven and flocking adhesives whether by pulverization, foaming or full bath methods. Vea Menos | |
| HS9705 | Tianyi Chemical Engineering Material Co., Ltd. | HS9705, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing inks, screen printing inks, and adhesives. This product is resistant to boiling water and exhibits low shrinkage properties. | |
| StanChem SC 6553 | StanChem Polymers | StanChem SC 6553 is a high solids, acrylic copolymer emulsion developed for paint and coating applications. Exterior and interior paints manufactured with SC 6553 exhibit good adhesion, flexibility and abrasion resistance and outstanding low temperature ...Vea Mas StanChem SC 6553 is a high solids, acrylic copolymer emulsion developed for paint and coating applications. Exterior and interior paints manufactured with SC 6553 exhibit good adhesion, flexibility and abrasion resistance and outstanding low temperature film formation. Vea Menos | Request Sample |
| Mowinyl 880 | Nippon Gohsei | Mowinyl 880 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. Featuring good miscible stability with colloidal silica, this product is well suited for use in clear coat and sealer applications. | |
| Soluryl S-840 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-840 is a Styrene Acrylic resin for the neutral pH water-based products and is compatible with most common emulsions. It provides high gloss, good pigment dispersion, and good polymer surfactant for emulsion polymerization. | |
| CN111US | Sartomer Americas | CN111US es un oligómero de acrilato de aceite de soja epoxidado difuncional que ofrece características de humectación de pigmentos y produce películas flexibles, de buena adherencia, curadas por radicales libres. Tiene alta resistencia al impacto y baja c...Vea Mas CN111US es un oligómero de acrilato de aceite de soja epoxidado difuncional que ofrece características de humectación de pigmentos y produce películas flexibles, de buena adherencia, curadas por radicales libres. Tiene alta resistencia al impacto y baja contracción. Las aplicaciones sugeridas incluyen revestimientos, hormigón y tintas. Vea Menos | |
| CN9030 | Sartomer Americas | CN9030 es un oligómero de acrilato de uretano diseñado para elaborar revestimientos curados con UV/EB resistentes al clima. Este nuevo oligómero ofrece mayor resistencia química y al agua y excelente adherencia a PMMA, policarbonatos, PET, madera y sustra...Vea Mas CN9030 es un oligómero de acrilato de uretano diseñado para elaborar revestimientos curados con UV/EB resistentes al clima. Este nuevo oligómero ofrece mayor resistencia química y al agua y excelente adherencia a PMMA, policarbonatos, PET, madera y sustratos de metal. Vea Menos | |
| GENOMER* 4335 | Rahn USA Corp. | GENOMER* 4335 is a hydroxy functional aliphatic urethane acrylate. This resin is recommended for radically curable inks, coatings and adhesives. It offers low yellowing, improved adhesion, and very good scratch and chemical resistance. This product can be...Vea Mas GENOMER* 4335 is a hydroxy functional aliphatic urethane acrylate. This resin is recommended for radically curable inks, coatings and adhesives. It offers low yellowing, improved adhesion, and very good scratch and chemical resistance. This product can be used for automotive coatings, industrial coatings, and outdoor applications. Vea Menos | Request Sample |
| Akuabrid PH 1200 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...Vea Mas Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. Vea Menos | |
| Akuabrid CRA 1610 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and ...Vea Mas Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. Vea Menos | |
| CN9009 | Sartomer Americas | CN9009 es un oligómero de acrilato de uretano alifático que confiere excelente dureza y es resistente al amarillamiento en tintas, adhesivos y revestimientos curados con UV/EB. Proporciona buena resistencia a la intemperie, alta flexibilidad, alta resiste...Vea Mas CN9009 es un oligómero de acrilato de uretano alifático que confiere excelente dureza y es resistente al amarillamiento en tintas, adhesivos y revestimientos curados con UV/EB. Proporciona buena resistencia a la intemperie, alta flexibilidad, alta resistencia al impacto, baja contracción y buena adherencia. Vea Menos | |
| CN9010 | Sartomer Americas | CN9010 es un oligómero de acrilato de uretano alifático desarrollado para revestimientos y tintas de curado con UV/EB. CN9010 confiere dureza, rápida respuesta de curado y resistencia al amarillamiento en estas aplicaciones. Los usos recomendados para est...Vea Mas CN9010 es un oligómero de acrilato de uretano alifático desarrollado para revestimientos y tintas de curado con UV/EB. CN9010 confiere dureza, rápida respuesta de curado y resistencia al amarillamiento en estas aplicaciones. Los usos recomendados para este producto son revestimientos plásticos y tintas flexográficas y litográficas. Vea Menos | |
| TAFIGEL® AP 30 | Munzing Chemie | TAFIGEL® AP 30 is a liquid white, turbid polymeric thickener that is an acrylic copolymer, emulsified in white oil, and is anionic. It is a thickener that designed for anionic and nonionic systems and is commonly used in adhesives, coatings, silicate faca...Vea Mas TAFIGEL® AP 30 is a liquid white, turbid polymeric thickener that is an acrylic copolymer, emulsified in white oil, and is anionic. It is a thickener that designed for anionic and nonionic systems and is commonly used in adhesives, coatings, silicate facade paints and paper coatings. Vea Menos | |
| CN2262 | Sartomer Americas | CN2262 es un oligómero de acrilato de poliéster con un índice de irritación principal (PII) de cero. CN2262 fue desarrollado para aplicaciones de revestimientos de madera y pisos curados con UV que requieren dureza y excepcional a la abrasión. CN2262 pro...Vea Mas CN2262 es un oligómero de acrilato de poliéster con un índice de irritación principal (PII) de cero. CN2262 fue desarrollado para aplicaciones de revestimientos de madera y pisos curados con UV que requieren dureza y excepcional a la abrasión. CN2262 proporciona excelentes tasas de curado, flexibilidad y adherencia entre capas. Vea Menos | |
| Rheotech™ M 02 | Arkema Rheology & Specialty Additives | Rheotech™ M 02 is a highly effective associative acrylic based thickener specifically designed for putty and textured coatings formulations Rheotech™ M 02 provides high viscosities at low and medium shear rates and outstanding resistance to crushing. | Request Sample |
| GENOMER* 4312 | Rahn USA Corp. | GENOMER* 4312 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; varnishes for paper, board and pla...Vea Mas GENOMER* 4312 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; varnishes for paper, board and plastics; wood and industrial coatings; and adhesives. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. Vea Menos | Request Sample |
| GENOMER* 4316 | Rahn USA Corp. | GENOMER* 4316 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; paper and board varnishes; wood an...Vea Mas GENOMER* 4316 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; paper and board varnishes; wood and industrial coatings; and plastic varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. Vea Menos | Request Sample |
| Sancryl 842-60 X | Polidur San Luis | Resina acrílica hidroxilada al 60 % en xileno. Propiedades : Excelente resistencia a la intemperie. Excelente resistencia al amarilleo. Alto % de reticulación. Aplicaciones : Lacas poliuretánicas de dos componentes para maquinarias y mantenimiento industr...Vea Mas Resina acrílica hidroxilada al 60 % en xileno. Propiedades : Excelente resistencia a la intemperie. Excelente resistencia al amarilleo. Alto % de reticulación. Aplicaciones : Lacas poliuretánicas de dos componentes para maquinarias y mantenimiento industrial en general (tanques,silos,etc). Lacas para pisos industriales o parkings. Vea Menos | |
| 3-Glycidoxypropylmethyldiethoxysilane | Dalian Onichem Co., Ltd. | 3-glicidoxipropilmetildietoxisilano es un agente de acoplamiento y de reticulación para sistemas a base de agua. 3-glicidoxipropilmetildietoxisilano se utiliza en SBR acrílico y adhesivos de poliuretano. | Request Sample |
| SILQUEST® A-187™ SILANE | Momentive Performance Materials | An epoxy functional silane suitable for use as adhesion promoters in polysulfide, urethane, epoxy and acrylic caulks, sealants and adhesives. | |
| SR553 | Sartomer Americas | SR553 is a monofunctional acrylate monomer that features excellent wetting, high flexibility, low Tg, and fast surface cure. | |
| Polisat 768-80 AB | Polidur San Luis | Resina poliester saturado al 80 % en acetato de butilo. Propiedades : Excelente elasticidad. Resistente al amarilleo. Excelente brillo y nivelación. Compatible con resinas acrílicas hidroxiladas. Aplicaciones : Lacas poliuretánicas sobre sustratos plástic...Vea Mas Resina poliester saturado al 80 % en acetato de butilo. Propiedades : Excelente elasticidad. Resistente al amarilleo. Excelente brillo y nivelación. Compatible con resinas acrílicas hidroxiladas. Aplicaciones : Lacas poliuretánicas sobre sustratos plásticos. Modificador de elasticidad en sistemas P.U. Barnices sobreimpresion sobre papel. Lacas poliuretánicas sobre metales. Adhesivos poliuretánicos de 2 componentes. Lacas PU para cueros. Vea Menos | |
| Melapol 1040-60 B | Polidur San Luis | Resina de melamina-formol butilada al 60 % en butanol. Propiedades : Mediana reactividad. Buena dureza final de los esmaltes horneables. Buena compatibilidad con gran variedad de alkyds y resinas acrílicas hidroxiladas. Aplicaciones : Esmaltes horneables ...Vea Mas Resina de melamina-formol butilada al 60 % en butanol. Propiedades : Mediana reactividad. Buena dureza final de los esmaltes horneables. Buena compatibilidad con gran variedad de alkyds y resinas acrílicas hidroxiladas. Aplicaciones : Esmaltes horneables combinada con : alkyds cortos y medianos, alkyds largos dependiendo balance de solventes, resinas acrílicas, esteres de epoxi. Vea Menos | |
| Thixol™ 53 L | Arkema Rheology & Specialty Additives | Thixol™ 53 L is a liquid acrylic self-associative thickener providing a strong pseudoplastic rheological profile to water-based systems. This product significantly prevents from settling and sagging without affecting levelling properties. Thixol™ 53 L is ...Vea Mas Thixol™ 53 L is a liquid acrylic self-associative thickener providing a strong pseudoplastic rheological profile to water-based systems. This product significantly prevents from settling and sagging without affecting levelling properties. Thixol™ 53 L is solvent-, APEO- and tin-free. Vea Menos | Request Sample |
| VINAVIL® 2839 | VINAVIL Americas Corp. | VINAVIL® 2839, in the form of a clear, tacky film, is an anionic acrylic emulsion that can be used in pressure-sensitive adhesives. This product has a good balance between shear and peel resistance, and can be applied on various substrates. | |
| CN307 | Sartomer Americas | CN307 es un éster de acrilato hidrófobo. CN307 presenta excelente flexibilidad, resistencia al agua y resistencia química. Se utiliza en revestimientos, componentes electrónicos y fotopolímeros curados con UB/EB. CN307 se basa en polibutadieno con alto co...Vea Mas CN307 es un éster de acrilato hidrófobo. CN307 presenta excelente flexibilidad, resistencia al agua y resistencia química. Se utiliza en revestimientos, componentes electrónicos y fotopolímeros curados con UB/EB. CN307 se basa en polibutadieno con alto contenido de vinilo y puede incorporarse en sistemas de caucho natural y sintético curados con peróxido, donde mejora las propiedades mecánicas y de rendimiento. Vea Menos | |
| GENOMER* 4590/PP | Rahn USA Corp. | GENOMER* 4590/PP is a urethane acrylate in GENOMER 1456 (PPTTA). It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks; screen inks ...Vea Mas GENOMER* 4590/PP is a urethane acrylate in GENOMER 1456 (PPTTA). It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks; screen inks and varnishes; and wood and industrial coatings. The low viscosity in combination with the high functionality allows for an easy product handling. Vea Menos | Request Sample |
| ST-40-2 | Chan Sieh Enterprises Co, Ltd. | ST-40-2 is a self-crosslinking styrene acrylic copolymer, in the form of a white emulsion, that provides excellent water-resistance and mechanical stability. This product can be used as a fabric adhesive for non-woven fabrics. | |
| Rheotech™ 3800 | Arkema Rheology & Specialty Additives | Rheotech™ 3800 is an acrylic associative thickener for water-based systems (also called HASE). It is designed to improve both the rheology and the color acceptance of water-based formulations. Its outstanding effectiveness at medium shear rates allows to ...Vea Mas Rheotech™ 3800 is an acrylic associative thickener for water-based systems (also called HASE). It is designed to improve both the rheology and the color acceptance of water-based formulations. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paints during handling and to facilitate coating by roll or by brush, especially for finishing touches. Vea Menos | Request Sample |
| CN2295 | Sartomer Americas | CN2295 es un oligómero de acrilato de poliéster hexafuncional desarrollado para sistemas de tinta curados con energía. CN2295 proporciona baja recolección de agua, buen flujo y buena humectación de pigmentos en tintas litográficas y offset. CN2295 puede u...Vea Mas CN2295 es un oligómero de acrilato de poliéster hexafuncional desarrollado para sistemas de tinta curados con energía. CN2295 proporciona baja recolección de agua, buen flujo y buena humectación de pigmentos en tintas litográficas y offset. CN2295 puede utilizarse en diversas formulaciones curadas por energía para aumentar la hidrofobicidad. Vea Menos | |
| RHOPLEX™ TP-257 | Univar Solutions | RHOPLEX™ TP-257 is a high-solids binder for waterborne acrylic traffic paints, which offers a good cost/performance balance. Quick-drying striping paint resist the rigorous environment encountered on highways and related surfaces such as airfields and par...Vea Mas RHOPLEX™ TP-257 is a high-solids binder for waterborne acrylic traffic paints, which offers a good cost/performance balance. Quick-drying striping paint resist the rigorous environment encountered on highways and related surfaces such as airfields and parking lots. Vea Menos | Request Sample |
| StanChem SC 6694 | StanChem Polymers | StanChem SC 6694 is a 100% acrylic copolymer emulsion designed for durable house and trim paints. Paints and coatings made with SC 6694, in addition to durability; also exhibit good wet adhesion, good dirt resistance pickup and good gloss retention. | Request Sample |
| CN2204 | Sartomer Americas | CN2204 is a tetrafunctional epoxy acrylate with good wet offset ink performance. CN2204 has good pigment wetting properties and emulsion stability on offset presses. CN2204 is used as the majority of the resin base. Cure speed and gloss are enhanced with ...Vea Mas CN2204 is a tetrafunctional epoxy acrylate with good wet offset ink performance. CN2204 has good pigment wetting properties and emulsion stability on offset presses. CN2204 is used as the majority of the resin base. Cure speed and gloss are enhanced with CN2204 in offset inks. Vea Menos | |
| CN374 | Sartomer Americas | CN374 is an amine modified acrylate used to dramatically increase surface cure speed when used in combination with a Type-II photoinitiator. To realize an effect, generally less than 10% of CN374 is needed in a formulation. The main applications for CN374...Vea Mas CN374 is an amine modified acrylate used to dramatically increase surface cure speed when used in combination with a Type-II photoinitiator. To realize an effect, generally less than 10% of CN374 is needed in a formulation. The main applications for CN374 are coatings, with a focus on the overprint varnishes. Vea Menos | |
| GENOMER* 4514 | Rahn USA Corp. | GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and...Vea Mas GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. Vea Menos | Request Sample |
| SR9051 | Sartomer Americas | SR9051 es un éster ácido líquido trifuncional, transparente, de color amarillento, viscoso, con olor a acrílico. Este producto es estable y ligeramente soluble en agua. | |
| EPS® 9147 | EPS Materials | EPS® 9147 is a low VOC coalescent for acrylic emulsions. The amount necessary for proper low temperature coalescence varies with different polymers. It has compatibility with many acrylic emulsions, thorough evaluations to check compatibility and stabilit...Vea Mas EPS® 9147 is a low VOC coalescent for acrylic emulsions. The amount necessary for proper low temperature coalescence varies with different polymers. It has compatibility with many acrylic emulsions, thorough evaluations to check compatibility and stability should be preformed. This is a permanent coalescent that remains in the paint film and should not be stored in PVC containers or piping for extended periods of time. Vea Menos | Request Sample |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...Vea Mas MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. Vea Menos | |
| CN9031 | Sartomer Americas | CN9031 es un oligómero de acrilato de uretano que presenta una combinación de alta elongación y buena resistencia a la intemperie y a la humedad. Las aplicaciones sugeridas incluyen: adhesivos laminados, vidrio, metal, plástico y revestimientos de madera...Vea Mas CN9031 es un oligómero de acrilato de uretano que presenta una combinación de alta elongación y buena resistencia a la intemperie y a la humedad. Las aplicaciones sugeridas incluyen: adhesivos laminados, vidrio, metal, plástico y revestimientos de madera, y tintas de estereolitografía, flexografía, inyección de tinta, litografía, serigrafía y serigrafía rotativa. Vea Menos | |
| BR-543 | Bomar, formerly Dymax Oligomers & Coatings | BR-543 is a difunctional, aliphatic, polyether urethane acrylate. Films formulated with BR-543 exhibit superior physical and weathering capabilities. BR-543 may also be used to improve the flexibility, weathering, and adhesion characteristics of existing ...Vea Mas BR-543 is a difunctional, aliphatic, polyether urethane acrylate. Films formulated with BR-543 exhibit superior physical and weathering capabilities. BR-543 may also be used to improve the flexibility, weathering, and adhesion characteristics of existing film and foil coatings. Vea Menos | |
| BR-640D | Bomar, formerly Dymax Oligomers & Coatings | BR-640D is a polybutadiene (PBD) urethane acrylate with a functionality of two. Designed to meet rigorous electronic applications, BR-640D has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring t...Vea Mas BR-640D is a polybutadiene (PBD) urethane acrylate with a functionality of two. Designed to meet rigorous electronic applications, BR-640D has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-640D withstands the extremes of temperature typical of such tests, without undue degradation of properties. Excellent hydrophobic properties were exhibited where 0.012 and 0.037% water was absorbed by cured coating when submerged in water for 24 hours. In addition to the adhesion properties listed in the table below, BR-640D showed excellent adhesion to ABS, acrylic, nylon-6, PVC, and PS. Vea Menos | |
| CN973J75 | Sartomer Americas | CN973J75 es un oligómero de diacrilato de uretano a base de poliéster aromático mezclado con 25% de SR506, acrilato de isobornilo. Es un oligómero hidrófobo altamente flexible. Las aplicaciones sugeridas incluyen: adhesivos, revestimientos, revestimientos...Vea Mas CN973J75 es un oligómero de diacrilato de uretano a base de poliéster aromático mezclado con 25% de SR506, acrilato de isobornilo. Es un oligómero hidrófobo altamente flexible. Las aplicaciones sugeridas incluyen: adhesivos, revestimientos, revestimientos de metales, papel y madera, componentes electrónicos, fotopolímeros, resinas fotosensibles, tintas, caucho y plásticos y elastómeros. Vea Menos | |
| BR-970BT | Bomar, formerly Dymax Oligomers & Coatings | BR-970BT is a low molecular weight, difunctional aliphatic urethane acrylate. BR-970BT can be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970BT offers rapid cure and low-yellowing properties where premium performance...Vea Mas BR-970BT is a low molecular weight, difunctional aliphatic urethane acrylate. BR-970BT can be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970BT offers rapid cure and low-yellowing properties where premium performance is required. Vea Menos | |
| ST-404U | Chan Sieh Enterprises Co, Ltd. | ST-404U is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product is flexible and elastic, and provides excellent water-resistance and mechanical stability. It can be used as a binder for soft, non-woven fabrics. | |
| StanChem SC 5174 | StanChem Polymers | StanChem SC 5174 is a vinyl/acrylic copolymer developed specifically as latex for interior and exterior paints and coatings. StanChem 5174 exhibits an excellent combination of flexibility and hardness. Intumescent and fire retardant paints produced with S...Vea Mas StanChem SC 5174 is a vinyl/acrylic copolymer developed specifically as latex for interior and exterior paints and coatings. StanChem 5174 exhibits an excellent combination of flexibility and hardness. Intumescent and fire retardant paints produced with SC 5174 provide superior scrub resistance, durability and flexibility. Vea Menos | Request Sample |
| CN110 | Sartomer Americas | CN110 es un oligómero de acrilato epoxi a base de bisfenol A difuncional que proporciona un buen equilibrio de las propiedades de agua y alta reactividad. Las propiedades de rendimiento de este producto incluyen resistencia a la abrasión, adherencia, resi...Vea Mas CN110 es un oligómero de acrilato epoxi a base de bisfenol A difuncional que proporciona un buen equilibrio de las propiedades de agua y alta reactividad. Las propiedades de rendimiento de este producto incluyen resistencia a la abrasión, adherencia, resistencia química y resistencia al agua. Las aplicaciones sugeridas incluyen adhesivos, revestimientos, componentes electrónicos, tintas y sellantes. Vea Menos | |
| Polimer 4008 | Polidur San Luis | Epoxi acrilada al 80% en Policure 5000. Características principales: Excelente velocidad de curado, Alta dureza y brillo, Alta versatilidad para distintas aplicaciones. Aplicaciones: Lacas y barnices para plástico y papel, Lacas y barnices para madera. | |
| StanChem SC 6826 | StanChem Polymers | StanChem SC 6826 is cross-linking acrylic latex, forming a soft film with excellent dry cleaning and laundering resistance. SC 6826 can be used as a binder for non-woven, fabric coating or saturation, water-based textile printing systems, flocking and lam...Vea Mas StanChem SC 6826 is cross-linking acrylic latex, forming a soft film with excellent dry cleaning and laundering resistance. SC 6826 can be used as a binder for non-woven, fabric coating or saturation, water-based textile printing systems, flocking and laminating adhesives. Vea Menos | Request Sample |
| CN9070 | Sartomer Americas | CN9070 is a hydrophobic aliphatic urethane acrylate oligomer based off of an aliphatic hydrophobic backbone. The oligomer possesses good resistance to water, both liquid and vapor, and to various chemicals. Upon crosslinking, the CN9070 will have a low Tg...Vea Mas CN9070 is a hydrophobic aliphatic urethane acrylate oligomer based off of an aliphatic hydrophobic backbone. The oligomer possesses good resistance to water, both liquid and vapor, and to various chemicals. Upon crosslinking, the CN9070 will have a low Tg, low crosslink density, and will be flexible. Vea Menos | |
| CN996 | Sartomer Americas | CN996 es un oligómero de acrilato de uretano que ofrece propiedades físicas superiores y tasas de curado rápido. CN996 proporciona excelente resistencia a solventes con polaridad y presenta buena resistencia base, al agua y a los ácidos. Las aplicaciones ...Vea Mas CN996 es un oligómero de acrilato de uretano que ofrece propiedades físicas superiores y tasas de curado rápido. CN996 proporciona excelente resistencia a solventes con polaridad y presenta buena resistencia base, al agua y a los ácidos. Las aplicaciones recomendadas de este producto incluyen revestimientos, revestimientos metálicos, de papel, de pisos de PVC y tintas. Vea Menos | |
| Bayhydrol® HD 2016 | Covestro | Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with othe...Vea Mas Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with other water-reducible binders. Vea Menos | |
| BR-930D | Bomar, formerly Dymax Oligomers & Coatings | BR-930D is a trifunctional urethane acrylate oligomer that offers high heat distortion temperatures. This product also offers high abrasion resistance, solvent resistance, and durability. BR-930D is perfect for 3D printing applications using SLA, 3D inkje...Vea Mas BR-930D is a trifunctional urethane acrylate oligomer that offers high heat distortion temperatures. This product also offers high abrasion resistance, solvent resistance, and durability. BR-930D is perfect for 3D printing applications using SLA, 3D inkjet, and DLP printers. Vea Menos | |
| Polimer 4007 | Polidur San Luis | Amina acrilada al 100%. Características principales: Excelente velocidad de curado, Sinergista de curado, Brillo medio, Promotor de adherencia. Aplicaciones: Lacas y barnices para plástico, Tintas y barnices con excelente adherencia en distintos sustrato...Vea Mas Amina acrilada al 100%. Características principales: Excelente velocidad de curado, Sinergista de curado, Brillo medio, Promotor de adherencia. Aplicaciones: Lacas y barnices para plástico, Tintas y barnices con excelente adherencia en distintos sustratos, Barnices y lacas para madera. Vea Menos | |
| MAINCOTE™ HG-56 | Univar Solutions | MAINCOTE™ HG-56 is an acrylic emulsion designed as a binder for maintenance coatings. While it is compositionally similar to MAINCOTE™ HG-54D, it offers improved reactive-pigment stability which achieve higher solids levels (50% vs. 41.5%), along with imp...Vea Mas MAINCOTE™ HG-56 is an acrylic emulsion designed as a binder for maintenance coatings. While it is compositionally similar to MAINCOTE™ HG-54D, it offers improved reactive-pigment stability which achieve higher solids levels (50% vs. 41.5%), along with improved stability. Vea Menos | Request Sample |
| RHOPLEX™ CL-106 | Univar Solutions | RHOPLEX™ CL-106 is an acrylic emulsion has been designed for use in factory-applied clear topcoats for wood requiring the highest levels of appearance and surface hardness characteristics. Lacquers are translucent in the can and upon application turn clea...Vea Mas RHOPLEX™ CL-106 is an acrylic emulsion has been designed for use in factory-applied clear topcoats for wood requiring the highest levels of appearance and surface hardness characteristics. Lacquers are translucent in the can and upon application turn clear very rapidly while drying. Vea Menos | Request Sample |
| StanChem SC 6125 | StanChem Polymers | StanChem SC 6125 is a vinyl acrylic copolymer emulsion designed for sealants and adhesives. SC 6125 provides excellent adhesion to wood and other surfaces. SC 6125 is an internally plasticized polymer that dries to a very flexible, tack free, water resi...Vea Mas StanChem SC 6125 is a vinyl acrylic copolymer emulsion designed for sealants and adhesives. SC 6125 provides excellent adhesion to wood and other surfaces. SC 6125 is an internally plasticized polymer that dries to a very flexible, tack free, water resistant surface. It is readily paintable. Vea Menos | Request Sample |
| N3D-P2120 | Sartomer Americas | N3D-P2120 is a resin system specifically designed for formulators targeting high quality prototyping. This particular resin system features novel (meth)acrylate oligomers that provide targeted cure speed and physical durability while maintaining a low eno...Vea Mas N3D-P2120 is a resin system specifically designed for formulators targeting high quality prototyping. This particular resin system features novel (meth)acrylate oligomers that provide targeted cure speed and physical durability while maintaining a low enough viscosity to ease handling and mixing. Vea Menos | |
| ACRONAL® 3633 | BASF Dispersions & Resins | Acronal® 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non...Vea Mas Acronal® 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non-APEO. Vea Menos | |
| StanChem SC 6458 | StanChem Polymers | StanChem SC 6458 is a 100% acrylic copolymer that exhibits excellent adhesion to a wide variety of substrates including metal, wood and cementitious surfaces. SC 6458 is self-crosslinking and is capable of crosslinking with urea-formaldehyde or melamine ...Vea Mas StanChem SC 6458 is a 100% acrylic copolymer that exhibits excellent adhesion to a wide variety of substrates including metal, wood and cementitious surfaces. SC 6458 is self-crosslinking and is capable of crosslinking with urea-formaldehyde or melamine binders. Vea Menos | Request Sample |
| VINNAPAS® EAF 67 | Wacker Chemical Corporation | VINNAPAS® EAF 67 is a plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene and acrylate. | Request Sample |
| SR588 | Sartomer Americas | SR588 is a long chain aliphatic monomer that is free radical curable and suited to applications such as acrylic polymers, hydrophobic coatings, and plastic coatings. | |
| Auroren® 350S (Acrylic Modified Polyolefin Resin) | PhibroChem | Auroren® 350S (Acrylic Modified Polyolefin Resin) is an acrylic modified polyolefin resin developed with NPC's original technology. It shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates ...Vea Mas Auroren® 350S (Acrylic Modified Polyolefin Resin) is an acrylic modified polyolefin resin developed with NPC's original technology. It shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates like PET and aluminum. Good solubility in non-aromatic solvents is also a great advantage of this product. Auroren® 350S appears as a light yellow pellet. Vea Menos | Request Sample |
| Auroren® 353S (Acrylic modified Polyolefin Resin) | PhibroChem | Auroren® 353S (Acrylic modified Polyolefin Resin) is an acrylic modified polyolefin resin developed with NPC's original technology. It shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates ...Vea Mas Auroren® 353S (Acrylic modified Polyolefin Resin) is an acrylic modified polyolefin resin developed with NPC's original technology. It shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates like PET and aluminum. This product has a lower tackiness than Auroren® 350S. It can be applied as a coating, primer, ingredient, and adhesive for a variety of substances. Vea Menos | Request Sample |
| ACRESIN® A 250 UV | BASF Dispersions & Resins | acResin® A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require ...Vea Mas acResin® A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 180 g/m2 (6.7 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. Vea Menos | |
| ACRESIN® A 260 UV | BASF Dispersions & Resins | acResin® A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require ...Vea Mas acResin® A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 100 g/m2 (3.8 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. Vea Menos | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...Vea Mas MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. Vea Menos | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...Vea Mas MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. Vea Menos | |
| AD-750A | Chan Sieh Enterprises Co, Ltd. | AD-750A is a styrene acrylic copolymer adhesive resin in the form of a yellowish transparent emulsion. This product features excellent water-resistance and adhesive strength. It can be used as an adhesive for lamination of polyurethane sponges and nylon c...Vea Mas AD-750A is a styrene acrylic copolymer adhesive resin in the form of a yellowish transparent emulsion. This product features excellent water-resistance and adhesive strength. It can be used as an adhesive for lamination of polyurethane sponges and nylon cloth. Vea Menos | |
| Bayhydrol® UV 2280 | Covestro | Bayhydrol® UV 2280 is a urethane acrylate dispersion. It is supplied as approximately 39% solids dispersion in water. It may be used in the formulation of aqueous UV-curing coatings, especially for applica- tion on wood/wood materials. Generally speaking,...Vea Mas Bayhydrol® UV 2280 is a urethane acrylate dispersion. It is supplied as approximately 39% solids dispersion in water. It may be used in the formulation of aqueous UV-curing coatings, especially for applica- tion on wood/wood materials. Generally speaking, the coated surfaces can be sanded before UV curing. Additions of 1.0 to 2.5% by weight photoinitiator, calculated on the solid binder, have proved suitable for initiating the curing reaction. Vea Menos | |
| SHIKOH™ UV-NS034 | Nippon Gohsei | SHIKOH™ UV-NS034 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring low adhesion, temporary surface protection, and reduced dependency on peeling speed. This product is well suited for use in optical, plastic, and electronic adhesi...Vea Mas SHIKOH™ UV-NS034 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring low adhesion, temporary surface protection, and reduced dependency on peeling speed. This product is well suited for use in optical, plastic, and electronic adhesives, masking tapes, and adhesive films and labels. Vea Menos | |
| SHIKOH™ UV-NS054 | Nippon Gohsei | SHIKOH™ UV-NS054 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring high adhesion, thick coating potential, low viscosity, and good heat resistance. This product is well suited for use in optical, plastic, and electronic adhesives,...Vea Mas SHIKOH™ UV-NS054 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring high adhesion, thick coating potential, low viscosity, and good heat resistance. This product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. Vea Menos | |
| Picassian® AC-213 | Stahl Polymers | Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties...Vea Mas Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties, and improves scrub resistance properties. Vea Menos | |
| GENOMER* 4293 | Rahn USA Corp. | GENOMER* 4293 is a bio-based aliphatic polyester urethane acrylate. Resin for radically curable inks and coatings, adhesives and 3D printing. The product has a high viscosity, but it can be rapidly reduced by adding reactive diluent. | Request Sample |
| Resiflow® L-37 | Estron Chemical, Inc. | Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and...Vea Mas Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and is especially effective in urethane acrylates, epoxy acrylates, polyesters, and epoxies. Recommended level of usage is 0.1%-0.5% based on solids. Resiflow® L-37 can be cut in various reactive diluents, aromatic and aliphatic hydrocarbons, esters, ketones, or alcohols for easy incorporation into the formula. Vea Menos | |
| Isocryl® C-70 | Estron Chemical, Inc. | Isocryl® C-70 is a moderate to high Tg carboxyl functional solid acrylic resin suitable for use as a curative resin in epoxy formulations, such as acrylic hybrid powder coatings, industrial solvent based coatings, or adhesives. Isocryl® C-70 can afford co...Vea Mas Isocryl® C-70 is a moderate to high Tg carboxyl functional solid acrylic resin suitable for use as a curative resin in epoxy formulations, such as acrylic hybrid powder coatings, industrial solvent based coatings, or adhesives. Isocryl® C-70 can afford coatings or adhesives with excellent chemical resistance, flexibility, outdoor durability, green strength, modulus and impact resistance. Because of its relatively high acid value, Isocryl® C-70 may provide enhanced adhesion to certain substrates and may be a good pigment dispersing resin. Vea Menos | |
| RAYKOTE® 1446G | Specialty Polymers, Inc. | RAYKOTE® 1446G is an anionic styrene acrylic emulsion polymer. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 1446G is primarily used for corrosion and water protection by being applied in a coating generally made for pr...Vea Mas RAYKOTE® 1446G is an anionic styrene acrylic emulsion polymer. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 1446G is primarily used for corrosion and water protection by being applied in a coating generally made for primer applications. Vea Menos | |
| CN963J85 | Sartomer Americas | CN963J85 es un oligómero de diacrilato de uretano a base de poliéster alifático mezclado con 15% de SR506, acrilato de isobornilo. Es un oligómero duro que ofrece buena resistencia a la intemperie y al amarillamiento. Los usos recomendados para este produ...Vea Mas CN963J85 es un oligómero de diacrilato de uretano a base de poliéster alifático mezclado con 15% de SR506, acrilato de isobornilo. Es un oligómero duro que ofrece buena resistencia a la intemperie y al amarillamiento. Los usos recomendados para este producto incluyen adhesivos, revestimientos, revestimientos de pisos, metales, papel y madera, componentes electrónicos, fotopolímeros, resinas fotosensibles y tintas. Vea Menos |
