| BK-883 | LUKEM D.O.O. | BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It ...Vea Mas BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It is also used in adhesives, inks, putties, and sealants. Vea Menos | |
| Polyamide Resin PA-188 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-188 is a benzene-soluble polyamide resin. It has good solvent release, good adhesive power, and good freezing resistance. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing v...Vea Mas Polyamide Resin PA-188 is a benzene-soluble polyamide resin. It has good solvent release, good adhesive power, and good freezing resistance. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing varnish. Vea Menos | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF SE, Intermediates Division | Componente básico para macro-monómeros y monómero para copolímeros de vinilo y diluyentes reactivos para revestimientos UV. Diluyente Reactivo en revestimientos UV y en adhesivos. Se utiliza para agua y para polímeros de vinilo hidróxido-funcionales ...Vea Mas Componente básico para macro-monómeros y monómero para copolímeros de vinilo y diluyentes reactivos para revestimientos UV. Diluyente Reactivo en revestimientos UV y en adhesivos. Se utiliza para agua y para polímeros de vinilo hidróxido-funcionales a base de solvente, que se entrecruzan con poliisocianatos y las resinas de melamina. Vea Menos | |
| Surfadol® 420 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol ethoxylate) | ACME | Surfadol 420 es un agente humectante etoxilado y antiespumante molecular (líquido 100% activo; HLB: 4). Tiene un rendimiento similar a Surfadol 541 con mejores características de manipulación en revestimientos a base de agua, tintas y sistemas adhesivos. ...Vea Mas Surfadol 420 es un agente humectante etoxilado y antiespumante molecular (líquido 100% activo; HLB: 4). Tiene un rendimiento similar a Surfadol 541 con mejores características de manipulación en revestimientos a base de agua, tintas y sistemas adhesivos. Tiene aplicaciones en tintas de impresión, tintas flexográficas y de huecograbado, soluciones de fuente, adhesivos sensibles a la presión y revestimientos internos a base de agua en latas. Vea Menos | |
| Surfadol® 440 Surfactant | ACME | Surfadol 440 es un agente humectante etoxilado de baja espuma (líquido 100% activo; HLB: 8). Proporciona reducción de la tensión superficial dinámica y en equilibrio de baja espuma con mejor dispersabilidad y facilidad de incorporación en revestimientos a...Vea Mas Surfadol 440 es un agente humectante etoxilado de baja espuma (líquido 100% activo; HLB: 8). Proporciona reducción de la tensión superficial dinámica y en equilibrio de baja espuma con mejor dispersabilidad y facilidad de incorporación en revestimientos a base de agua, tintas y sistemas adhesivos. Surfadol 440 tiene aplicaciones en tintas de impresión, tintas flexográficas y de huecograbado, soluciones de fuente, adhesivos sensibles a la presión y revestimientos internos a base de agua en latas. Vea Menos | |
| Surfadol® 465 Surfactant | ACME | Surfadol 465 es un agente humectante etoxilado de baja espuma (líquido 100% activo; HLB: 13). Es un dio acetilénico etoxilado que proporciona reducción de la tensión superficial de baja espuma con mejor solubilidad y compatibilidad en revestimientos a bas...Vea Mas Surfadol 465 es un agente humectante etoxilado de baja espuma (líquido 100% activo; HLB: 13). Es un dio acetilénico etoxilado que proporciona reducción de la tensión superficial de baja espuma con mejor solubilidad y compatibilidad en revestimientos a base de agua, tintas y sistemas adhesivos. Surfadol 465 tiene aplicaciones en tintas de impresión, tintas flexográficas y de huecograbado, soluciones de fuente, adhesivos sensibles a la presión y revestimientos internos a base de agua en latas. Vea Menos | |
| Antifoam V12 | Basildon Chemical Company Ltd. | Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in p...Vea Mas Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in printing inks, paints, glues, paint resins, and adhesives. Vea Menos | |
| ADDAPT® DISP™ 800 | ADDAPT Chemicals BV | ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in...Vea Mas ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. Vea Menos | |
| ADDAPT® DISP™ 900 | ADDAPT Chemicals BV | ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...Vea Mas ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. Vea Menos | |
| HL-200 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...Vea Mas HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. Vea Menos | |
| HL-300 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...Vea Mas HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. Vea Menos | |
| HL-380 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...Vea Mas HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. Vea Menos | |
| HB-620 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...Vea Mas HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. Vea Menos | |
| Polyamide Resin PA-388 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-388 is a benzene-soluble polyamide resin. It has good transparency, strong adhesive power, outstanding glossiness, and good pigment wettability. This product is well suited for use in gravure printing ink, paper and thin film printing i...Vea Mas Polyamide Resin PA-388 is a benzene-soluble polyamide resin. It has good transparency, strong adhesive power, outstanding glossiness, and good pigment wettability. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing varnish. Vea Menos | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA es un monómero de metacrilato monofuncional hodrófobo con baja temperatura de transición vítrea (Tg) y es excelente como flexibilizador y plastificante. Este producto tiene un contenido de agua de 0,1% máx., un número de color de 100 Pt/Co má...Vea Mas Bisomer® LMA es un monómero de metacrilato monofuncional hodrófobo con baja temperatura de transición vítrea (Tg) y es excelente como flexibilizador y plastificante. Este producto tiene un contenido de agua de 0,1% máx., un número de color de 100 Pt/Co máx., y un monómero activo de 97,0%. Bisomer® LMA está basado en una forma natural de alcohol láurico; como lauril metacrilato C12; el contenido es de alrededor de 65 a 70%. Bisomer® LMA se utiliza principalmente en la industria automotriz para modificar la viscosidad de aceites lubricantes. Sin embargo, debido a su naturaleza hidrófoba y sus propiedades flexibilizantes, Bisomer® LMA también se utiliza ampliamente en adhesivos anaeróbicos, la impregnación al vacío de piezas de fundición de aluminio, selladores y adhesivos sensibles a la presión (PSA). Vea Menos | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CHMA es un monómero hidrofóbico de metacrilato. Es un metacrilato monofuncional, siendo ideal para la síntesis de polímeros acrílicos. Bisomer® CHMA puede usarse para mejorar la hidrofobicidad, resistencia a la intemperie y resistencia física y q...Vea Mas Bisomer® CHMA es un monómero hidrofóbico de metacrilato. Es un metacrilato monofuncional, siendo ideal para la síntesis de polímeros acrílicos. Bisomer® CHMA puede usarse para mejorar la hidrofobicidad, resistencia a la intemperie y resistencia física y química de las resinas acrílicas. Este producto también es un diluyente reactivo útil en adhesivos y revestimientos 2K. Vea Menos | |
| XYNFW-sw | Xinyu South Wollastonite Co., Ltd. | XYNFW-sw is a metasilicate calcium mineral fiber filling used in plastic, rubber, adhesives, paint, printing ink and paper. This product is well suited for use in the production of prime coats, intermediate coats, oil-based coatings, road sign coatings, s...Vea Mas XYNFW-sw is a metasilicate calcium mineral fiber filling used in plastic, rubber, adhesives, paint, printing ink and paper. This product is well suited for use in the production of prime coats, intermediate coats, oil-based coatings, road sign coatings, sound insulation coatings and fireproof coatings. Vea Menos | |
| ADDAPT® DISP™ 400 | ADDAPT Chemicals BV | ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in pai...Vea Mas ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. Vea Menos | |
| ADDAPT® DISP™ 500 | ADDAPT Chemicals BV | ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...Vea Mas ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. Vea Menos | |
| HB-615 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...Vea Mas HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. Vea Menos | |
| Dibutyl Maleate (DBM) | Chemceed | El dibutil maleato (DBM) es un plastificador para resinas de vinilo y se usa en aplicaciones de copolímeros que involucran acetatos de vinilo y PVC. El dibutil maleato es un éster no saturado que se usa para crear surfactantes sulfosuccinatos en detergent...Vea Mas El dibutil maleato (DBM) es un plastificador para resinas de vinilo y se usa en aplicaciones de copolímeros que involucran acetatos de vinilo y PVC. El dibutil maleato es un éster no saturado que se usa para crear surfactantes sulfosuccinatos en detergentes y pinturas. Otras aplicaciones del DBM incluyen el uso en plastisoles, dispersiones, revestimientos, adhesivos y lubricantes sintéticos. Vea Menos | |
| Diisodecyl Phthalate (DIDP) | Chemceed | El diisodecil ftalato (DIDP) es un plastificante de alto peso molecular, de uso general. Como plastificante de PVC, el DIDP se usa en fórmulas de tintas de impresión en pantallas. Asimismo, el DIDP se puede usar en aplicaciones tales como revestimientos d...Vea Mas El diisodecil ftalato (DIDP) es un plastificante de alto peso molecular, de uso general. Como plastificante de PVC, el DIDP se usa en fórmulas de tintas de impresión en pantallas. Asimismo, el DIDP se puede usar en aplicaciones tales como revestimientos de látex, tintas de impresión, revestimientos textiles, de papel, de cuero, tintas, adhesivos y selladores. Vea Menos | |
| ADDAPT® BioWet™ 450C | ADDAPT Chemicals BV | ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foamin...Vea Mas ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foaming, completely soluble in water, and improves pigment grinding. Vea Menos | |
| HIKOTACK P-110S | Kolon | HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete c...Vea Mas HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete curing agent and binder for asphalt. Vea Menos | |
| GR-FMT | Hubei Gurun Technology Co., Ltd. | GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV c...Vea Mas GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV coating, printing ink and adhesive. Vea Menos | |
| Surfadol® 541 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol, TMDD) | ACME | El surfactante Surfadol 541 proporciona una combinación única de ventajas de rendimiento en una amplia gama de formulaciones a base de agua, incluyendo la reducción de la tensión superficial, excelente humectación en superficies de baja energía y de contr...Vea Mas El surfactante Surfadol 541 proporciona una combinación única de ventajas de rendimiento en una amplia gama de formulaciones a base de agua, incluyendo la reducción de la tensión superficial, excelente humectación en superficies de baja energía y de control de espuma. Los niveles de uso típicos varían entre 0,25% de peso a 2,0% del peso total de la fórmula. El surfactante Surfadol 541 es una molécula de diol acetilénico no iónica, que tiene un medio hidrófilo central bloqueado por dos extremos hidrófobos. Surfadol 541 es una sustancia cerosa blanca, sólida a temperatura ambiente, aunque también se suministra en varios portadores de solventes para mayor comodidad y facilidad de uso. Vea Menos | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...Vea Mas CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. Vea Menos | |
| BK-923 | LUKEM D.O.O. | BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is ...Vea Mas BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is also used in inks, adhesives, putties, sealants, varnishes, and nitro lacquer. Vea Menos | |
| Butyl Benzyl Phthalate (BBP) | Chemceed | El butil bencil ftalato (BBP) es un plastificante de rápida fusión y alta solvatación con gran eficiencia, que puede usarse con una variedad de resinas. El BBP se usa para múltiples operaciones de formación de hojas de PVC y extrusión, y constituye un est...Vea Mas El butil bencil ftalato (BBP) es un plastificante de rápida fusión y alta solvatación con gran eficiencia, que puede usarse con una variedad de resinas. El BBP se usa para múltiples operaciones de formación de hojas de PVC y extrusión, y constituye un estándar de la industria de pisos de vinilo. El BBP también se emplea en muchos revestimientos, tintas, adhesivos y calafateos. Vea Menos | |
| Polyamide Resin PA-108 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-108 is a benzene-soluble stable polyamide resin. It has good solvent release, excellent glossiness, strong adhesive power, and fine gel resistance. This product is well suited for use in gravure printing ink, paper and thin film printin...Vea Mas Polyamide Resin PA-108 is a benzene-soluble stable polyamide resin. It has good solvent release, excellent glossiness, strong adhesive power, and fine gel resistance. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing varnish. Vea Menos | |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...Vea Mas IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. Vea Menos | Request Sample |
| EBECRYL® 645 | Allnex | EBECRYL® 645 is a modified diacrylate ester of bisphenol A expoxy resin diluted with 25% of tripropyleneglycol diacrylate (TPGDA) monomer. It is recommended for use in: overprint varnishes, coatings for paper, paperboard, wood, chipboard and rigid plastic...Vea Mas EBECRYL® 645 is a modified diacrylate ester of bisphenol A expoxy resin diluted with 25% of tripropyleneglycol diacrylate (TPGDA) monomer. It is recommended for use in: overprint varnishes, coatings for paper, paperboard, wood, chipboard and rigid plastics, paper upgrading, fast cure response, laminating adhesives, and wood sealers and top coats. Vea Menos | Request Sample |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...Vea Mas CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. Vea Menos | |
| ADDAPT® Foamstop™ MP 51N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor poli...Vea Mas ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. Vea Menos | |
| ADDAPT® Foamstop™ SL 30 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ...Vea Mas ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ink, adhesives, and sewage treatment, among other applications. Vea Menos | |
| Dynoadd® F-606 | Dynoadd by Dynea | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...Vea Mas Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. Vea Menos | |
| Olgamid 2115-80 X | Polidur San Luis | Poliamido amina reactiva al 100 % o al 80 % en xileno. Propiedades : Excelente adherencia sobre metales y concreto. Excelente resistencia química. Buen pot-life. Aplicaciones : Endurecedor de resinas epoxi sólidas. Fondos epoxi de alta resistencia a niebl...Vea Mas Poliamido amina reactiva al 100 % o al 80 % en xileno. Propiedades : Excelente adherencia sobre metales y concreto. Excelente resistencia química. Buen pot-life. Aplicaciones : Endurecedor de resinas epoxi sólidas. Fondos epoxi de alta resistencia a niebla salina. Esmaltes epoxi para mantenimiento industrial. Selladores y esmaltes para pisos. Vea Menos | |
| Capromer™ PD1–10 A | BASF SE, Intermediates Division | CAPROMER™ PD1-10 A es similar a Capromer PD1-10, pero con mayor estabilidad hidrolítica. | |
| Capromer™ PD1–20 A | BASF SE, Intermediates Division | CAPROMER™ PD1-20 A es similar a Capromer PD1-20 con con mayor aumento de estabilidad hidrolítica. | |
| Neopentane diamine | BASF SE, Intermediates Division | Este es un reticulante para las resinas de epoxi, componente básico para las poliamidas. La diamina de neopentano se utiliza con frecuencia en revestimientos de epoxi así como en compuestos de epoxi y adhesivos. Neopentano diamina es altamente reactiv...Vea Mas Este es un reticulante para las resinas de epoxi, componente básico para las poliamidas. La diamina de neopentano se utiliza con frecuencia en revestimientos de epoxi así como en compuestos de epoxi y adhesivos. Neopentano diamina es altamente reactivo y puede mezclarse fácilmente con resinas de epoxi. Debido a su estructura, es menos sensible al agua comparada con las aminas alifáticas no ramificadas. Vea Menos | |
| ADDAPT® Foamstop™ CC 11 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, pri...Vea Mas ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. Vea Menos | |
| GR-DVE | Hubei Gurun Technology Co., Ltd. | GR-DVE is a yellowish clear liquid and a vinyl etheric double functional monomer with low toxicity, quick curing speed, no oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to cationic photocu...Vea Mas GR-DVE is a yellowish clear liquid and a vinyl etheric double functional monomer with low toxicity, quick curing speed, no oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to cationic photocurable coatings, adhesives, elastomers, printing inks and more enabling better photopolymerization performance. Vea Menos | |
| Epoxy Resin SM828 | Jiangsu Sanmu Group Corporation | SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is rec...Vea Mas SM828 is an undiluted, clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. It is a widely-used, general purpose liquid epoxy resin. This product is recognized as the standard from which many variations have been developed. It is recommended for adhesives, marine and protective coatings, can and coil coatings, automotive coatings, and more. Vea Menos | |
| HDK® H20 | Wacker Chemical Corporation | Una silicona amorfa sintética, hidrofóbica,, producida vía la hidrólisis por fuego. | |
| RHEOLATE® 212 | Elementis | RHEOLATE® 212 es un modificador asociativo del flujo de poliuretano de poliéter, libre de COV, con 20% de concentración de sólidos, para aplicaciones acuosas. Está diseñado para usar en pinturas plásticas y otros sistemas acuosos, incluidos los revestimie...Vea Mas RHEOLATE® 212 es un modificador asociativo del flujo de poliuretano de poliéter, libre de COV, con 20% de concentración de sólidos, para aplicaciones acuosas. Está diseñado para usar en pinturas plásticas y otros sistemas acuosos, incluidos los revestimientos textiles, las tintas, los adhesivos y los sellantes en los que se requiere mejorar la nivelación de la película y mantener la viscosidad a un alto nivel de cizallamiento durante la aplicación del producto. Vea Menos | |
| Kamin® 90 | KaMin Solutions | Kamin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important. K...Vea Mas Kamin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important. Kamin® 90 comes in the form of a white, milled fine powder. Vea Menos | |
| ADDAPT® Foamstop™ EM 19 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, ...Vea Mas ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. Vea Menos | |
| ADDAPT® Foamstop™ VF 10N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, prin...Vea Mas ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. Vea Menos | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...Vea Mas Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. Vea Menos | |
| RHEOLATE® 266 | Elementis | RHEOLATE® 266 está basado en un nuevo polímero poliuretano de poliéter de urea. La actividad fue diseñada para brindar un espesamiento altamente eficiente a tasas de cizallamiento bajo a medio y espesamiento de la viscosidad por corte. Es ideal para siste...Vea Mas RHEOLATE® 266 está basado en un nuevo polímero poliuretano de poliéter de urea. La actividad fue diseñada para brindar un espesamiento altamente eficiente a tasas de cizallamiento bajo a medio y espesamiento de la viscosidad por corte. Es ideal para sistemas aplicados mediante aerosol o plecas, como por ejemplo acabados e imprimadores; lacas para muebles y maderas; pinturas de mantenimiento; adhesivos. Vea Menos | |
| HDK® T30 | Wacker Chemical Corporation | Una silicona amorfa sintética, hidrofílica, producida vía la hidrólisis por fuego. | |
| Ethylene diamine | BASF SE, Intermediates Division | Este es un reticulante para resinas de epoxi, es componente básico para las poliamidas y poliuretanos. La diamina de etileno se utiliza con frecuencia en revestimientos epoxi y en adhesivos, así como en compuestos de epoxi. Además, puede ser utilizad...Vea Mas Este es un reticulante para resinas de epoxi, es componente básico para las poliamidas y poliuretanos. La diamina de etileno se utiliza con frecuencia en revestimientos epoxi y en adhesivos, así como en compuestos de epoxi. Además, puede ser utilizada como extendedor de cadena para las dispersiones de poliuretano transmitidas por el agua. Vea Menos | |
| 2-Hydroxyethyl Methacrylate (HEMA) | Kowa American Corporation | Hidroxi monómero de polioles acrílicos, hidrogeles, y recubrimientos hidrófilos. | |
| DAPRO® FX 514 | Elementis | DAPRO® FX 514 es un agente de fusión ecológico preparado a partir de recursos renovables. Está especialmente diseñado para sistemas de pintura de bajo COV, en especial adhesivos. Este producto es inodoro y libre de COV. DAPRO® FX 514 demuestra una excelen...Vea Mas DAPRO® FX 514 es un agente de fusión ecológico preparado a partir de recursos renovables. Está especialmente diseñado para sistemas de pintura de bajo COV, en especial adhesivos. Este producto es inodoro y libre de COV. DAPRO® FX 514 demuestra una excelente formación de películas, resistencia a los rayones, brillo mejorado y mayor tiempo de reposo abierto. Vea Menos | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...Vea Mas Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. Vea Menos | |
| Polyamide Resin PA-308 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-308 is a benzene-soluble polyamide resin. It has good heat resistance, strong adhesive power, fine glossiness, anti-friction, and anti-scratch. This product is well suited for use in heat-resistance printing ink, paper and thin film pri...Vea Mas Polyamide Resin PA-308 is a benzene-soluble polyamide resin. It has good heat resistance, strong adhesive power, fine glossiness, anti-friction, and anti-scratch. This product is well suited for use in heat-resistance printing ink, paper and thin film printing ink, over-printing varnish, and over-printing ink. Vea Menos | |
| Poliuret 778-75 AE | Polidur San Luis | Poliuretano aromático no reactivo al 75 % en acetato de etilo. Propiedades : Rápido secado al tacto y duro. Buena flexibilidad, Rápida liberación de solvente, Excelente compatibilidad con resinas nitrocelulósicas. Aplicaciones : Plastificante de nitrocelu...Vea Mas Poliuretano aromático no reactivo al 75 % en acetato de etilo. Propiedades : Rápido secado al tacto y duro. Buena flexibilidad, Rápida liberación de solvente, Excelente compatibilidad con resinas nitrocelulósicas. Aplicaciones : Plastificante de nitrocelulosa para tintas de laminación y adhesivos. Tintas de frente y laminación tintas para aplicación en goma y plásticos. Vea Menos | |
| AEROSIL® R 202 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 202 es una sílice pirogénica después de tratada con un polidimetilsiloxano. Se utiliza para los adhesivos y selladores, epoxi -, resinas de viniléster, geles de cable, y los recubrimientos de gel. AEROSIL® R 202 con la ayuda de espesamiento y t...Vea Mas AEROSIL® R 202 es una sílice pirogénica después de tratada con un polidimetilsiloxano. Se utiliza para los adhesivos y selladores, epoxi -, resinas de viniléster, geles de cable, y los recubrimientos de gel. AEROSIL® R 202 con la ayuda de espesamiento y tixotropía de líquidos polares complejos basados en epoxi, poliuretano, o resinas de viniléster. También ayuda a que el engrosamiento y tixotropía de geles de cable para cables de fibra óptica. Vea Menos | Request Sample |
| HDK® T40 | Wacker Chemical Corporation | Una silicona amorfa sintética, hidrofílica, producida vía la hidrólisis por fuego. | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF SE, Intermediates Division | El éter divinilo de dietilenglicol es un diluyente reactivo para poliésteres no saturados, revestimientos UV, tintas UV, adhesivos UV y revestimientos de desbloquear. Reticulante para polímeros de polaicrilato usados como resinas de intercambio iónic...Vea Mas El éter divinilo de dietilenglicol es un diluyente reactivo para poliésteres no saturados, revestimientos UV, tintas UV, adhesivos UV y revestimientos de desbloquear. Reticulante para polímeros de polaicrilato usados como resinas de intercambio iónico. Vea Menos | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...Vea Mas CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. Vea Menos | |
| ADDAPT® Foamstop™ MP 72 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This ...Vea Mas ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, adhesives, printing inks, floor polish, lubricants, and waste-water treatment. Vea Menos | |
| ADDAPT® Foamstop™ SL 10 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid tha...Vea Mas ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid that is easily emulsifiable and is used in paint, printing ink, adhesives, and sewage treatment, among other applications. Vea Menos | |
| GR-XBPO | Hubei Gurun Technology Co., Ltd. | GR-XBPO is a yellowish powder and a photoinitiator good for thick layers of photocuring coatings with anti-yellowing, low-volatility, low odor and good solubility. This product's absorption wavelength can reach 450 nm and can also be used for resistant UV...Vea Mas GR-XBPO is a yellowish powder and a photoinitiator good for thick layers of photocuring coatings with anti-yellowing, low-volatility, low odor and good solubility. This product's absorption wavelength can reach 450 nm and can also be used for resistant UV varnish, many coatings, adhesive, offset printing ink, screen printing ink and flexo ink. Vea Menos | |
| AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based ...Vea Mas AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. Vea Menos | Request Sample |
| BECKOPOX™ EP 128 | Allnex | De viscosidad baja, resina de epoxi líquida diluida en reactivo. | Request Sample |
| AMBERYL GR-720 | Polimeros Sinteticos, S.A de C.V | Fabricated from a resin pitch esterified with polyalcohols. Is characterized by being thermoplastic and having lower acidity and higher melting point than the pitch which it is derived. The Gum Resin has particularly attractive properties for the preparat...Vea Mas Fabricated from a resin pitch esterified with polyalcohols. Is characterized by being thermoplastic and having lower acidity and higher melting point than the pitch which it is derived. The Gum Resin has particularly attractive properties for the preparation of chewing gum. Other applications can be found in the manufacture of paints, printing inks, wood finishes, rubber products, solvent-based adhesives and hot melt. Vea Menos | |
| Kamin® 35 | KaMin Solutions | Un sólido cristalino amarillo pálido usado en polimerizaciones convencionales para generar los materiales con un carácter más hidrofóbico. También se utiliza como diluyente reactivo para el curado por radiación ULTRAVIOLETA iniciado radicalmente. | |
| Pangel OMD2 | Tolsa, S.A. | Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, an...Vea Mas Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, adhesives, industrial finishes, maintenance coatings, epoxy based coatings, and paint removers. Vea Menos | |
| Diisodecyl Adipate (DIDA) | Chemceed | El diisodecil adipato (DIDA) es un plastificante con excelentes propiedades a baja temperatura. El DIDA funciona bien como parte de una mezcla plastificante y es compatible con PVC, acetato-butirato de celulosa, etil celulosa, nitrocelulosa, policloropren...Vea Mas El diisodecil adipato (DIDA) es un plastificante con excelentes propiedades a baja temperatura. El DIDA funciona bien como parte de una mezcla plastificante y es compatible con PVC, acetato-butirato de celulosa, etil celulosa, nitrocelulosa, policloropreno y butiral de polivinilo. En tintas y revestimientos, el DIDA puede suavizar los aglutinantes para mejorar la flexibilidad. El DIDA también puede usarse en adhesivos, calafateos, selladores y pinturas para mejorar sus propiedades. Vea Menos | |
| GR-VE/VP | Hubei Gurun Technology Co., Ltd. | GR-VE/VP is a yellowish clear liquid and a vinyl ether/allyl cationic/free-radical mixed monomer with low toxicity, quick curing speed, low oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to...Vea Mas GR-VE/VP is a yellowish clear liquid and a vinyl ether/allyl cationic/free-radical mixed monomer with low toxicity, quick curing speed, low oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to cationic/free-radical photocurable coatings, adhesives, elastomers, printing inks and more enabling better photopolymerization performance. Vea Menos | |
| GR-VE/A | Hubei Gurun Technology Co., Ltd. | GR-VE/A is a yellowish clear liquid and a vinyl ether/acrylyl cationic/free-radical mixed monomer with low toxicity, quick curing speed, low oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied t...Vea Mas GR-VE/A is a yellowish clear liquid and a vinyl ether/acrylyl cationic/free-radical mixed monomer with low toxicity, quick curing speed, low oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to cationic/free-radical photocurable coatings, adhesives, elastomers, printing inks and more enabling better photopolymerization performance. Vea Menos | |
| EBECRYL® 3700 | Allnex | Ebecryl® 3700 es el éster diacrilato de una resina epoxi de bisfenol A y presenta bajo olor y una respuesta de curado excepcional. Las películas de EBECRYL® 3700 curadas por luz ultravioleta (UV) o haz de electrones (EB) demuestran alta dureza superficial...Vea Mas Ebecryl® 3700 es el éster diacrilato de una resina epoxi de bisfenol A y presenta bajo olor y una respuesta de curado excepcional. Las películas de EBECRYL® 3700 curadas por luz ultravioleta (UV) o haz de electrones (EB) demuestran alta dureza superficial, alto brillo y una excelente resistencia a los productos químicos. Encuentra amplio uso en aplicaciones bajo UV/EB como recubrimientos, barnices de sobreimpresión, tintas, adhesivos y dispositivos electrónicos. Vea Menos | Request Sample |
| AMBERYL M6 | Polimeros Sinteticos, S.A de C.V | Corresponds to the pitch maleic esterified with glycerol, with the relevant characteristic brightness and that impart hardness to the lacquers and varnishes where they are included. Can be used as a modifier of nitrocellulose lacquers, enamels, printing i...Vea Mas Corresponds to the pitch maleic esterified with glycerol, with the relevant characteristic brightness and that impart hardness to the lacquers and varnishes where they are included. Can be used as a modifier of nitrocellulose lacquers, enamels, printing inks resinous cheer and "off-set", varnishes for printing, solvent based adhesives and hot melt, sealants, wood finishes and generally in those applications where thermoplastic resins are required for good stability and low color. Vea Menos | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF SE, Intermediates Division | Este es un reticulante para las resinas de epoxi, es el componente básico para las poliamidas y poliuretanos. 2,2' -dimetil-4,4'-metileno bis(ciclohexilamina) es adecuado para revestimientos de epóxido de dos componentes, para adhesivos a base de epox...Vea Mas Este es un reticulante para las resinas de epoxi, es el componente básico para las poliamidas y poliuretanos. 2,2' -dimetil-4,4'-metileno bis(ciclohexilamina) es adecuado para revestimientos de epóxido de dos componentes, para adhesivos a base de epoxi y para compuestos de epoxi. La estructura hidrofóbica de 2,2' -Dimetil-4,4'-metileno bis(ciclohexilamina) mejora la resistencia hidrolítica y aumenta la reactividad y la compatibilidad en revestimientos de epoxi. Vea Menos | |
| EBECRYL® 8807 | Allnex | EBECRYL® 8807 es un diacrilato de uretano alifático que presenta una rápida respuesta de curado superficial, color claro y viscosidad moderada. Las películas curadas por luz UV/EB exhiben buena flexibilidad, dureza, resistencia a la abrasión y son resiste...Vea Mas EBECRYL® 8807 es un diacrilato de uretano alifático que presenta una rápida respuesta de curado superficial, color claro y viscosidad moderada. Las películas curadas por luz UV/EB exhiben buena flexibilidad, dureza, resistencia a la abrasión y son resistentes al amarillamiento. Se recomienda su uso en: revestimientos de madera, materiales para pisos de cemento y compuestos, adhesivos o selladores curados con lámparas de baja intensidad y revestimientos flexibles que requieren un curado rápido al aire. Vea Menos | Request Sample |
| Venadol™ 104 | Harcros Chemicals, Inc. | Venadol™ 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol...Vea Mas Venadol™ 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. Vea Menos | |
| EGDA | Suny Chem | EGDA is a colorless, transparent, eco-friendly, high boiling point liquid solvent that is a perfect substitute for Dibasic Ester (DBE). This product has a lighter odor, better stability, lower cost, and improved leveling and gloss. EGDA is used in wood, c...Vea Mas EGDA is a colorless, transparent, eco-friendly, high boiling point liquid solvent that is a perfect substitute for Dibasic Ester (DBE). This product has a lighter odor, better stability, lower cost, and improved leveling and gloss. EGDA is used in wood, coil, can, and car coating applications. It is also used in the baking industry, ink industry, as a mold core adhesive, as well as a cleaning agent and varnish remover. Vea Menos | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division | CAPROMER™ PD1-10 es un poliéster poliol a base de policaprolactona para revestimientos a base de poliuretano . El producto difunctional esta hecho a base de glicol-neopentil con un peso molecular de 1000. Se utiliza donde una combinación única de propied...Vea Mas CAPROMER™ PD1-10 es un poliéster poliol a base de policaprolactona para revestimientos a base de poliuretano . El producto difunctional esta hecho a base de glicol-neopentil con un peso molecular de 1000. Se utiliza donde una combinación única de propiedades es deseada, incluyendo: estabilidad hidrolítica, excelente resistencia a la intemperie, buenas características dinámicas y excepcional flexibilidad a bajas temperaturas. Vea Menos | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division | CAPROMER™ PD1-20 es un poliol de poliéster a base de policaprolactona para revestimientos a base de poliuretano. El producto difunctional es a base de glicol-neopentil con un peso molecular de 2000. Se utiliza donde una combinación única de propiedades ...Vea Mas CAPROMER™ PD1-20 es un poliol de poliéster a base de policaprolactona para revestimientos a base de poliuretano. El producto difunctional es a base de glicol-neopentil con un peso molecular de 2000. Se utiliza donde una combinación única de propiedades es deseada, incluyendo: estabilidad hidrolítica, excelente resistencia a la intemperie, buenas características dinámicas y excepcional flexibilidad a bajas temperaturas. Vea Menos | |
| N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine | BASF SE, Intermediates Division | Este es un reticulante para las resinas de epoxi. N, N'-Bis-(3-aminopropil)-diamina de etileno se utiliza para revestimientos de epoxi de dos componentes, adhesivos a base de epoxi y piezas de plástico. Debido a su alta funcionalidad y peso equivalente...Vea Mas Este es un reticulante para las resinas de epoxi. N, N'-Bis-(3-aminopropil)-diamina de etileno se utiliza para revestimientos de epoxi de dos componentes, adhesivos a base de epoxi y piezas de plástico. Debido a su alta funcionalidad y peso equivalente bajo, N, N'-Bis (3-aminopropil)- diamina de etileno permite reticulación de alta densidad. Vea Menos | |
| EBECRYL® 145 | Allnex | EBECRYL® 145 is an Xi-free aliphatic difunctional acrylate of low surface tension. Propoxylated (2) neopentyl glycol diacrylate exhibits good viscosity reducing and solvency characteristics in UV/EB curable formulations, and is an effective monomer for de...Vea Mas EBECRYL® 145 is an Xi-free aliphatic difunctional acrylate of low surface tension. Propoxylated (2) neopentyl glycol diacrylate exhibits good viscosity reducing and solvency characteristics in UV/EB curable formulations, and is an effective monomer for developing low viscosity and low volatility coatings and inks. It is recommended for use in clear & pigmented coatings, over print varnishes, liquid inks, and pressure sensitive adhesives. Vea Menos | Request Sample |
| HIKOTACK P-140 | Kolon | HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and inc...Vea Mas HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. HIKOTACK P-140 can also be used as binder for color asphalt and tackifier for EVA based hot melt adhesives. Vea Menos | |
| Venadol™ 104BC | Harcros Chemicals, Inc. | Venadol™ 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...Vea Mas Venadol™ 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104BC to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. Vea Menos | |
| Venadol™ 104E | Harcros Chemicals, Inc. | Venadol™ 104E is a 50% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...Vea Mas Venadol™ 104E is a 50% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104E to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. Vea Menos | |
| Venadol™ 104H | Harcros Chemicals, Inc. | Venadol™ 104H is a 75% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...Vea Mas Venadol™ 104H is a 75% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104H to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. Vea Menos | |
| Venadol™ 104PA | Harcros Chemicals, Inc. | Venadol™ 104PA is a 50% active surface-active agent in 2-propanol(IPA) with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various pro...Vea Mas Venadol™ 104PA is a 50% active surface-active agent in 2-propanol(IPA) with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104PA to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. Vea Menos | |
| Venadol™ 40 | Harcros Chemicals, Inc. | Venadol™ 40 is a non-foaming wetting agent with a unique structure that allows multi-functional properties which include the following: foam control, increased wetting and reduction in surface tension. These various properties allow Venadol™ 40 to be util...Vea Mas Venadol™ 40 is a non-foaming wetting agent with a unique structure that allows multi-functional properties which include the following: foam control, increased wetting and reduction in surface tension. These various properties allow Venadol™ 40 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. Vea Menos | |
| SURFYNOL® 355 | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 355 surfactant is a proprietary wetting agent designed to provide dynamic wetting without generating excess foam in waterbased pigment dispersions, inks, overprint varnishes, adhesives and coatings. It does not contain added mineral oils, hazard...Vea Mas SURFYNOL® 355 surfactant is a proprietary wetting agent designed to provide dynamic wetting without generating excess foam in waterbased pigment dispersions, inks, overprint varnishes, adhesives and coatings. It does not contain added mineral oils, hazardous air pollutants (HAPs), alkyl phenol ethoxylates (APEs) or acetylenic diols. This product is especially suited for waterbased applications requiring global food contact compliances. Vea Menos | Request Sample |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...Vea Mas Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. Vea Menos | |
| AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 es un sílice ahumado tratado posteriormente con DDS (dimetildiclorosilano). Se utiliza en goma de silicona y selladores de silicona, pinturas y revestimientos, tintas de impresión y toner, compuestos de cables y geles, adhesivos y en agente...Vea Mas AEROSIL® R 972 es un sílice ahumado tratado posteriormente con DDS (dimetildiclorosilano). Se utiliza en goma de silicona y selladores de silicona, pinturas y revestimientos, tintas de impresión y toner, compuestos de cables y geles, adhesivos y en agentes fitosanitarios. AEROSIL® R 972 tiene control reológico de sistemas líquidos complejos y es resistente al agua e hidrofobizante de sistemas líquidos. Se emplea en revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar la protección contra la corrosión. Vea Menos | Request Sample |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division | CAPROMER ™ PD4-05 es un poliol de poliéster a base de policaprolactona para revestimientos a base de poliuretanos. EL producto difusional se basa en dietilenglicol con un peso molecular de 550. Se utiliza donde se desea una flexibilidad a baja temperatura...Vea Mas CAPROMER ™ PD4-05 es un poliol de poliéster a base de policaprolactona para revestimientos a base de poliuretanos. EL producto difusional se basa en dietilenglicol con un peso molecular de 550. Se utiliza donde se desea una flexibilidad a baja temperatura excelente. Vea Menos | |
| EBECRYL® 3701 | Allnex | EBECRYL® 3701 es un diacrilato epoxi modificado con bisfenol A. Imparte flexibilidad y resistencia a revestimientos y tintas curadas mediante luz ultravioleta (UV) o haz de electrones (EB) mientras mantiene al mismo tiempo las propiedades ideales tales c...Vea Mas EBECRYL® 3701 es un diacrilato epoxi modificado con bisfenol A. Imparte flexibilidad y resistencia a revestimientos y tintas curadas mediante luz ultravioleta (UV) o haz de electrones (EB) mientras mantiene al mismo tiempo las propiedades ideales tales como respuesta de curado rápido y una resistencia superior a los productos químicos, que son típicas de los acrilatos epoxi estándar. Se recomienda su uso en: revestimientos transparentes para papel, madera y plástico rígido, adhesivos para laminación de papel y película, y vehículos para tintas litográficas, serigráficas y flexográficas. Vea Menos | Request Sample |
| Ultramoll® V HV | Rhein Chemie Rheinau GmbH | Ultramoll® V HV is an adipic acid polyester appearing as a clear viscous liquid. This polymeric plasticizer is commonly used in polymers to provide resistance to extraction by oil, aliphatic hydrocarbons, and water, migration-resistance when in contact wi...Vea Mas Ultramoll® V HV is an adipic acid polyester appearing as a clear viscous liquid. This polymeric plasticizer is commonly used in polymers to provide resistance to extraction by oil, aliphatic hydrocarbons, and water, migration-resistance when in contact with other plastics and paints, lightfastness, and flexibility through prolonged exposure to elevated temperatures. Ultramoll® V HV finds application in adhesives, sealants, printing inks, calendered films, and cast films. Vea Menos | |
| Venadol™ 104DPM | Harcros Chemicals, Inc. | Venadol™ 104DPM is a 50% active surface-active agent in Dipropylene glycol monomethyl ether with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilizati...Vea Mas Venadol™ 104DPM is a 50% active surface-active agent in Dipropylene glycol monomethyl ether with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104DPM to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. Vea Menos | |
| Venadol™ 104 PG50 | Harcros Chemicals, Inc. | Venadol™ 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various...Vea Mas Venadol™ 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104 PG50 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. Vea Menos | |
| Dynol™ 607 Surfactant | Evonik Operations GmbH, BL Coating Additives | El surfactante de Dynol 607, ha sido desarrollado para cubrir la necesidad creciente de surfactantes de alto rendimiento y rentabilidad. Comparado con sufractantes tradicionales como ser fluorosurfactantes y silicones, este surfactante proporcionaun equi...Vea Mas El surfactante de Dynol 607, ha sido desarrollado para cubrir la necesidad creciente de surfactantes de alto rendimiento y rentabilidad. Comparado con sufractantes tradicionales como ser fluorosurfactantes y silicones, este surfactante proporcionaun equilibrio único de propiedades para una amplia gama de aplicaciones industriales a base de agua. Vea Menos | Request Sample |
| Airase® 5355 Defoamer | Evonik Operations GmbH, BL Coating Additives | Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not...Vea Mas Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). Airase® 5355 Defoamer is especially suited for waterbased applications requiring broad food contact compliances. Vea Menos | Request Sample |
| Sacryl 678 | Suny Chem | Sacryl 678 is a water base solid acrylic resin that is telomerized by acrylic, methyl acrylate. It has good alkali solubilty It can be adjusted to be a dispersing connection for ink and a leveling brightening modifier for overprint varnish after caustic n...Vea Mas Sacryl 678 is a water base solid acrylic resin that is telomerized by acrylic, methyl acrylate. It has good alkali solubilty It can be adjusted to be a dispersing connection for ink and a leveling brightening modifier for overprint varnish after caustic neutralizeration through ammonia water or organic amine. It is mainly used for water-base ink, overprinting varnish, and synthetic emulsion. It can also can be used as a dispersing agent for paint pigment, printing color paste, and adhesives. Vea Menos | |
| Dynol™ 604 Surfactant | Evonik Operations GmbH, BL Coating Additives | Agente humectante de bajo-COV (Conponente Organico Volatil), baja espuma , no iónico; ideal para aplicaciones de alto rendimiento transmitidas por el agua. Este agente humectante tiene la habilidad de reducir tanto el equilibrio como la tensión dinamica ...Vea Mas Agente humectante de bajo-COV (Conponente Organico Volatil), baja espuma , no iónico; ideal para aplicaciones de alto rendimiento transmitidas por el agua. Este agente humectante tiene la habilidad de reducir tanto el equilibrio como la tensión dinamica de superficie a un grado que no se da en otros surfactantes.Liquido 100 % activo. Vea Menos | Request Sample |
