| SETAQUA® B B 130 | Allnex | Setaqua B B 130 is a non-saponifable polymer dispersion which dries by oxidation. It is used as a binder for aqueous air- and force-drying coatings, especially primers, one-coat matt finishes and adhesion primers (also suitable for non-ferrous metals). | Request Sample |
| EBECRYL® 767 | Allnex | EBECRYL® 767 is an acid functionalized acrylic resin diluted with 38% of isobornyl acrylate (IBOA)(1) monomer. This light coloured, moderate viscosity resin is designed as an adhesion promoting additive and it can also be used as a primer or top coat. | Request Sample |
| SETAL® 28-4001 | Allnex | SETAL® 28-4001 is an economical high solids oil modified epoxy ester intended for air dry or baking applications. SETAL® 28-4001 is especially suited for uses requiring a hard and flexible finish with excellent adhesion and good alkali and abrasion resist...Vea Mas SETAL® 28-4001 is an economical high solids oil modified epoxy ester intended for air dry or baking applications. SETAL® 28-4001 is especially suited for uses requiring a hard and flexible finish with excellent adhesion and good alkali and abrasion resistance. Vea Menos | Request Sample |
| EBECRYL® 444 | Allnex | EBECRYL® 444 is a chlorinated polyester resin diluted with 40% of propoxylated glycerol triacrylate (OTA480). EBECRYL® 444 exhibits good wet lithographic behaviour and pigment wetting properties. UV (ultraviolet light) cured films based on EBECRYL® 444, display good adhesion...Vea Mas EBECRYL® 444 is a chlorinated polyester resin diluted with 40% of propoxylated glycerol triacrylate (OTA480). EBECRYL® 444 exhibits good wet lithographic behaviour and pigment wetting properties. UV (ultraviolet light) cured films based on EBECRYL® 444, display good adhesion to metals, plastics and paper. Vea Menos | Request Sample |
| ADDAPT® PolySurF™ HPH | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal an...Vea Mas ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal and has flame retardant properties. Vea Menos | |
| Sacryl WBE 690 | Suny Chem | Sacryl WBE 690 is a kind of good hardness and high gloss non-film emulsion with properties of high temperature resistance, high transparency, and fast drying. It has good adhesion to many substrates and can be used for making special high gloss over print...Vea Mas Sacryl WBE 690 is a kind of good hardness and high gloss non-film emulsion with properties of high temperature resistance, high transparency, and fast drying. It has good adhesion to many substrates and can be used for making special high gloss over printing varnish, flexible ink, gravure ink, and pre-printing ink. Vea Menos | |
| Polimer 6000 | Polidur San Luis | Acrílica acrilada al 40% en Policure 5013. Características principales: Media velocidad de curado, Excelente adherencia en sustratos plásticos, Dureza y brillo medio. Aplicaciones: Lacas y barnices para plástico, Lacas y barnices para madera, Productos de...Vea Mas Acrílica acrilada al 40% en Policure 5013. Características principales: Media velocidad de curado, Excelente adherencia en sustratos plásticos, Dureza y brillo medio. Aplicaciones: Lacas y barnices para plástico, Lacas y barnices para madera, Productos de excelente adherencia en distintos sustratos. Vea Menos | |
| Lucidene 603 | Hydrite Chemical Co. | Lucidene 603 is a soft, film forming polymer formulated to be used as a modifier in overprint varnishes and to provide adhesion to film and foil substrates. It has good pigment wetting and viscosity stability for use in the grind stage of dry pigment disp...Vea Mas Lucidene 603 is a soft, film forming polymer formulated to be used as a modifier in overprint varnishes and to provide adhesion to film and foil substrates. It has good pigment wetting and viscosity stability for use in the grind stage of dry pigment dispersions. Vea Menos | |
| Polimer 4007 | Polidur San Luis | Amina acrilada al 100%. Características principales: Excelente velocidad de curado, Sinergista de curado, Brillo medio, Promotor de adherencia. Aplicaciones: Lacas y barnices para plástico, Tintas y barnices con excelente adherencia en distintos sustrato...Vea Mas Amina acrilada al 100%. Características principales: Excelente velocidad de curado, Sinergista de curado, Brillo medio, Promotor de adherencia. Aplicaciones: Lacas y barnices para plástico, Tintas y barnices con excelente adherencia en distintos sustratos, Barnices y lacas para madera. Vea Menos | |
| Filtrez™ 339 A | Lawter | Filtrez™ 339 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Benefits of using the resin include higher gloss, adhesion and hardness. Filtrez™ 339 A is used in flexographic and gravure i...Vea Mas Filtrez™ 339 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Benefits of using the resin include higher gloss, adhesion and hardness. Filtrez™ 339 A is used in flexographic and gravure inks and coatings. Vea Menos | |
| EBECRYL® 4250 | Allnex | Desmolux® D 200 XP es un acrilato de uretano isocianato sin diluir diseñado para usar como promotor de adherencia en revestimientos UV y EB. Puede combinarse con resinas con hidroxilo para formular revestimientos cuyo curado se realiza mediante un proceso...Vea Mas Desmolux® D 200 XP es un acrilato de uretano isocianato sin diluir diseñado para usar como promotor de adherencia en revestimientos UV y EB. Puede combinarse con resinas con hidroxilo para formular revestimientos cuyo curado se realiza mediante un proceso de curado dual (polimerización inducida por UV y reacción NCO/OH). Desmolux® D 200 XP también se utiliza en revestimientos de curado UV puros para mejorar la adherencia en soportes críticos como plásticos, metales, maderas exóticas y películas de melamina. Desmolux® D 200 XP es adecuado para la formulación de revestimientos de poliuretano de un componente de curado por humedad, especialmente para imprimadores de adherencia de un solo componente. Vea Menos | Request Sample |
| Flex-Rez™ 2433AD A | Lawter | Flex-Rez™ 2433AD A is an alcohol dilutable polyamide resin that displays good adhesion on substrates like polypropylene, polyethylene and coated foils together with suitable wet-pack resistance. It is considered suitable for use in gravure and flexographi...Vea Mas Flex-Rez™ 2433AD A is an alcohol dilutable polyamide resin that displays good adhesion on substrates like polypropylene, polyethylene and coated foils together with suitable wet-pack resistance. It is considered suitable for use in gravure and flexographic inks, overprint varnishes and heat-seal coatings. Vea Menos | |
| PHENODUR® PR 285/55IB/B | Allnex | PHENODUR® PR 285/55IB/B is a curable unplasticized phenolic resin. It is used for coating the interior and exterior surfaces of packaging containers and cans; as high-adhesion, chemically resistant protective coatings for apparatus vessels, pipelines, etc...Vea Mas PHENODUR® PR 285/55IB/B is a curable unplasticized phenolic resin. It is used for coating the interior and exterior surfaces of packaging containers and cans; as high-adhesion, chemically resistant protective coatings for apparatus vessels, pipelines, etc.; for heat-curing phenolic/epoxide resin combinations. Vea Menos | Request Sample |
| DUROXYN® EF 935/60X | Allnex | Duroxyn® EF 935/60X is an air-drying and stoving epoxy resin ester. It has very rapid air-drying, excellent hardness flexibility and adhesion, and excellent resistance to alkali and colour retention. It's used in industrial stoving enamels and air-drying ...Vea Mas Duroxyn® EF 935/60X is an air-drying and stoving epoxy resin ester. It has very rapid air-drying, excellent hardness flexibility and adhesion, and excellent resistance to alkali and colour retention. It's used in industrial stoving enamels and air-drying and stoving anticorrosive primers. Vea Menos | Request Sample |
| SETALUX® 57-7205 | Allnex | SETALUX® 57-7205 is a HAPs-free acetoacetate functional acrylic resin for use in combination with SETALUX® 10-1440 in the isocyanate-free "Ketac" primer system. This system provides very fast dry, good sanding, good adhesion to various substrates and sup...Vea Mas SETALUX® 57-7205 is a HAPs-free acetoacetate functional acrylic resin for use in combination with SETALUX® 10-1440 in the isocyanate-free "Ketac" primer system. This system provides very fast dry, good sanding, good adhesion to various substrates and superior topcoat hold-out. Vea Menos | Request Sample |
| EBECRYL® 168 | Allnex | EBECRYL® 168 es un promotor de adhesión de metacrilato ácido diseñado como un aditivo para recubrimientos de metal curables bajo la luz ultravioleta (UV) y haz de electrones (EB). Se recomienda para su uso en: revestimientos de metal e imprimadores en gen...Vea Mas EBECRYL® 168 es un promotor de adhesión de metacrilato ácido diseñado como un aditivo para recubrimientos de metal curables bajo la luz ultravioleta (UV) y haz de electrones (EB). Se recomienda para su uso en: revestimientos de metal e imprimadores en general, revestimientos para tuberías y caños galvanizados, recubrimientos de bobinas y formulaciones resistentes a las soldaduras. Vea Menos | Request Sample |
| EBECRYL® 170 | Allnex | EBECRYL® 170 es un promotor de adhesión de acrilato ácido diseñado como un aditivo para recubrimientos de metal curables bajo la luz ultravioleta (UV) y haz de electrones (EB). Se recomienda para su uso en: revestimientos de metal e imprimadores en genera...Vea Mas EBECRYL® 170 es un promotor de adhesión de acrilato ácido diseñado como un aditivo para recubrimientos de metal curables bajo la luz ultravioleta (UV) y haz de electrones (EB). Se recomienda para su uso en: revestimientos de metal e imprimadores en general, revestimientos para tuberías y caños galvanizados, recubrimientos de bobinas y formulaciones resistentes a las soldaduras. Vea Menos | Request Sample |
| Dynoadd® F-800 | Dynoadd by Dynea | Dynoadd® F-800 es un fluido multifuncional que promueve la adherencia y un agente de nivelación de la superficie. Modifica las superficies de los revestimientos mejorando considerablemente la adherencia a la espuma de poliuretano. Como efectivo aditivo de...Vea Mas Dynoadd® F-800 es un fluido multifuncional que promueve la adherencia y un agente de nivelación de la superficie. Modifica las superficies de los revestimientos mejorando considerablemente la adherencia a la espuma de poliuretano. Como efectivo aditivo del fluido y la nivelación, este producto controla la tensión de la superficie y elimina los defectos de la superficie como por ejemplo la piel de naranja, los cráteres y las perforaciones. Dynoadd® F-800 también tiene un efecto positivo en la humectación de de los sustratos y los pigmentos. Vea Menos | |
| Titanate Coupling Agent FD-TnBT | Zhejiang Feidian Chemical Co., Ltd. | FD-TnBT es un líquido incoloro a amarillo claro. Se utiliza principalmente para mejorar el rendimiento de las lacas de poliéster y para preparar pinturas con resistencia a la alta temperatura. En las reacciones de reticulación, puede mejorar la adherencia...Vea Mas FD-TnBT es un líquido incoloro a amarillo claro. Se utiliza principalmente para mejorar el rendimiento de las lacas de poliéster y para preparar pinturas con resistencia a la alta temperatura. En las reacciones de reticulación, puede mejorar la adherencia entre el adhesivo y el polímero, así como mejorar la adherencia de las tintas a los sustratos. También se utiliza como catalizador en la síntesis del caucho. Vea Menos | |
| PHENODUR® VPR 1740/50WA | Allnex | PHENODUR® VPR 1740/50WA is a dispersion based on phenol resol. This product is used as a binder for coated abrasives and impragnation. It shows a high drying and curing speed because of its dispersion characteristic. On organic and inorganic surfaces this product exhibits good adhesion...Vea Mas PHENODUR® VPR 1740/50WA is a dispersion based on phenol resol. This product is used as a binder for coated abrasives and impragnation. It shows a high drying and curing speed because of its dispersion characteristic. On organic and inorganic surfaces this product exhibits good adhesion. Vea Menos | Request Sample |
| Flex-Rez™ 3370CS A | Lawter | Flex-Rez™ 3370CS A is a polyamide resin that has 100% solids with good adhesion and displaying gel, water, lard, grease, oil and alkali resistance. It is considered suitable for use in flexo/gravure inks for plastics and foils as well as in overprint varn...Vea Mas Flex-Rez™ 3370CS A is a polyamide resin that has 100% solids with good adhesion and displaying gel, water, lard, grease, oil and alkali resistance. It is considered suitable for use in flexo/gravure inks for plastics and foils as well as in overprint varnishes and coatings. Vea Menos | |
| PHENODUR® PR 899/60MPAC | Allnex | PHENODUR PR 899 is a curable phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE free systems). High adhesion, chemically resistant protective coatings for cans, apparatus, vessels and pipelines. Excellent chemical resi...Vea Mas PHENODUR PR 899 is a curable phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE free systems). High adhesion, chemically resistant protective coatings for cans, apparatus, vessels and pipelines. Excellent chemical resistance, medium flexibility, golden color shade, for BADGE- and BPA-NI lacquers. Vea Menos | Request Sample |
| PHENODUR® PR 787/50MP | Allnex | PHENODUR® PR 787/50MP is an ultra low formaldehyde, heat curable, BPA NI phenolic resin. It is used in heat-curable phenolic coatings in combinations with epoxide or polyester resin, high-adhesion, chemically resistant protective coatings for interior or...Vea Mas PHENODUR® PR 787/50MP is an ultra low formaldehyde, heat curable, BPA NI phenolic resin. It is used in heat-curable phenolic coatings in combinations with epoxide or polyester resin, high-adhesion, chemically resistant protective coatings for interior or exterior can coatings and metal drum linings. Vea Menos | Request Sample |
| EBECRYL® 8213 | Allnex | EBECRYL® 8213 is an aliphatic urethane acrylate with 70% solid content diluted in butyl acetate. EBECRYL® 8213 exhibits good yellowing resistance and very good outdoor resistance. Furthermore this resin provides very good adhesion onto aluminium-based vac...Vea Mas EBECRYL® 8213 is an aliphatic urethane acrylate with 70% solid content diluted in butyl acetate. EBECRYL® 8213 exhibits good yellowing resistance and very good outdoor resistance. Furthermore this resin provides very good adhesion onto aluminium-based vacuum metallization layer and most metallic basecoats for plastic coating. Vea Menos | Request Sample |
| G-CURE™ 17-1444 | Allnex | G-Cure® 17-1445 (formerly G-Cure® 144A70) is an acrylic polyol, with 4.2% OH, that when combined with appropriate aliphatic polyisocyanates, provides excellent application and appearance properties and good properties of DOI, adhesion and outdoor durabili...Vea Mas G-Cure® 17-1445 (formerly G-Cure® 144A70) is an acrylic polyol, with 4.2% OH, that when combined with appropriate aliphatic polyisocyanates, provides excellent application and appearance properties and good properties of DOI, adhesion and outdoor durability. G-Cure® 17-1444 also possesses good flexibility and hardness. Vea Menos | Request Sample |
| TEGO® AddBond 2325 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond 2325 is a liquid solution of a modified special polyester in n-butyl acetate for solventborne formulations. This product has good adhesion improvement on metal and plastic. It also has good flexibility, viscosity reduction, increase of solid...Vea Mas TEGO® AddBond 2325 is a liquid solution of a modified special polyester in n-butyl acetate for solventborne formulations. This product has good adhesion improvement on metal and plastic. It also has good flexibility, viscosity reduction, increase of solids content, and a fixation of aluminum pigments. It also improves the corrosion protection, and is widely compatible, particularly with polyacrylates. Vea Menos | Request Sample |
| RESYDROL® AY 6173w/45WA | Allnex | Resydrol® AY 6173W/45WA es una emulsión de resina alquídica, de acrílico modificado, de secado por aire. Ofrece protección contra la corrosión, buena adhesión sobre diversos sustratos y muy buena capacidad de repintado. Es un aglutinante único o en combi...Vea Mas Resydrol® AY 6173W/45WA es una emulsión de resina alquídica, de acrílico modificado, de secado por aire. Ofrece protección contra la corrosión, buena adhesión sobre diversos sustratos y muy buena capacidad de repintado. Es un aglutinante único o en combinación con dispersiones para la formulación de imprimadores de madera. Vea Menos | Request Sample |
| ADDAPT® PolySurF™ HPL | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This p...Vea Mas ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This product is used in paints, lacquers, printing inks, and adhesives. Vea Menos | |
| ADDAPT® PolySurF™ HPm | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.Thi...Vea Mas ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.This product is used in paints, lacquers, printing inks, and adhesives. Vea Menos | |
| EBECRYL® 824 | Allnex | EBECRYL® 824 is a acrylate functional resin designed for UV/EB laminating adhesives that require low migration and low residual odor. It is suitable to both film/film and film/paper lamination. It is characterized by its low viscosity and good adhesion pr...Vea Mas EBECRYL® 824 is a acrylate functional resin designed for UV/EB laminating adhesives that require low migration and low residual odor. It is suitable to both film/film and film/paper lamination. It is characterized by its low viscosity and good adhesion properties to many common plastic film substrates. Vea Menos | Request Sample |
| VIACRYL® SC 160/60T | Allnex | Viacryl® SC 160/60T is a physically drying, plasticized acrylic mixed polymer. It is used a sole binder for road marking paints with good adhesion, rapid film loading capacity and non discoloration properties. The flexibility has been adjusted so that the...Vea Mas Viacryl® SC 160/60T is a physically drying, plasticized acrylic mixed polymer. It is used a sole binder for road marking paints with good adhesion, rapid film loading capacity and non discoloration properties. The flexibility has been adjusted so that the use of additional plasticizers is not necessary. Vea Menos | Request Sample |
| SILVET® AD Premier 011 | Silberline Manufacturing Co., Inc. | SILVET® AD Premier 011 is a bright, low dusting aluminum pigment with a fine, flake particle size. This product is designed to provide opacity, adhesion, and maximum formulation flexibility in gravure and flexographic inks. SILVET® AD Premier 011 is 99% n...Vea Mas SILVET® AD Premier 011 is a bright, low dusting aluminum pigment with a fine, flake particle size. This product is designed to provide opacity, adhesion, and maximum formulation flexibility in gravure and flexographic inks. SILVET® AD Premier 011 is 99% non-volatile by weight and non-leafing. Vea Menos | |
| SILVET® AD Premier 016 | Silberline Manufacturing Co., Inc. | SILVET® AD Premier 016 is a bright, low dusting aluminum pigment with a medium, flake particle size. This product is designed to provide opacity, adhesion, and maximum formulation flexibility in gravure and flexographic inks. SILVET® AD Premier 016 is 99%...Vea Mas SILVET® AD Premier 016 is a bright, low dusting aluminum pigment with a medium, flake particle size. This product is designed to provide opacity, adhesion, and maximum formulation flexibility in gravure and flexographic inks. SILVET® AD Premier 016 is 99% non-volatile by weight and non-leafing. Vea Menos | |
| ADDAPT® BioWet™ 60G | ADDAPT Chemicals BV | ADDAPT® BioWet™ 60G is a proprietary blend of polyalkylene glycols and polyhydroxy amide. It is used as a solvent-free glass adhesion promoter and glass corrosion inhibitor. This product is used in coatings, printing inks, and cleaning agents. BioWet 60G ...Vea Mas ADDAPT® BioWet™ 60G is a proprietary blend of polyalkylene glycols and polyhydroxy amide. It is used as a solvent-free glass adhesion promoter and glass corrosion inhibitor. This product is used in coatings, printing inks, and cleaning agents. BioWet 60G is non-foaming, biodegradable, and completely soluble in water. Vea Menos | |
| Picassian® PU-548 | Stahl Polymers | Picassian® PU-548 is a non reactive, moderately tough, aromatic, polyester modified polyurethane resin. It is used as an adhesion promoter in gravure inks primarily. This product is tin free, TDI free, has good compatibility with other alcohol soluble res...Vea Mas Picassian® PU-548 is a non reactive, moderately tough, aromatic, polyester modified polyurethane resin. It is used as an adhesion promoter in gravure inks primarily. This product is tin free, TDI free, has good compatibility with other alcohol soluble resins, and is very resistant to oils, water, and fats. Vea Menos | |
| SILVET® AD Ultra 012 | Silberline Manufacturing Co., Inc. | SILVET® AD Ultra 012 is a low dusting aluminum pigment that is widely compatible with a very fine particle size. This product is designed to provide narrow particle size distribution, opacity, and adhesion in flexographic inks. SILVET® AD Ultra 012 is non...Vea Mas SILVET® AD Ultra 012 is a low dusting aluminum pigment that is widely compatible with a very fine particle size. This product is designed to provide narrow particle size distribution, opacity, and adhesion in flexographic inks. SILVET® AD Ultra 012 is non-leafing and 99% non-volatile by weight. Vea Menos | |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...Vea Mas Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. Vea Menos | |
| SETALUX® 17-2319 | Allnex | SETALUX® 17-2319 is a hydroxy functional acrylic polyol, which has excellent adhesion to all the common metal substrates like cold rolled steel, stainless steel, aluminum, galvanized surface, etc. It is HAPs-free and contains PCBTF. This allows formulator...Vea Mas SETALUX® 17-2319 is a hydroxy functional acrylic polyol, which has excellent adhesion to all the common metal substrates like cold rolled steel, stainless steel, aluminum, galvanized surface, etc. It is HAPs-free and contains PCBTF. This allows formulator to make very low VOC direct-to-metal (DTM) primer. Vea Menos | Request Sample |
| PHENODUR® PR 612/80B LF | Allnex | PHENODUR® PR 612/80B LF is a curable phenolic resin, with lower free formaldehyde levels compared to PR 612/80B. It is used in heat-curable phenolic/epoxide resin combinations, high-adhesion, chemically resistant protective coatings for apparatus, vessels...Vea Mas PHENODUR® PR 612/80B LF is a curable phenolic resin, with lower free formaldehyde levels compared to PR 612/80B. It is used in heat-curable phenolic/epoxide resin combinations, high-adhesion, chemically resistant protective coatings for apparatus, vessels and pipelines. PHENODUR® PR 612 also for wire insulation varnishes. Vea Menos | Request Sample |
| ALQUIMEX 109 | Polimeros Sinteticos, S.A de C.V | The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, e...Vea Mas The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, enamels for repainting automobiles of high brightness, resistance to yellowing, and enamels for industrial finishes. Vea Menos | |
| Crestacryl® 71-9078 | Scott Bader | Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for...Vea Mas Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for metal paints, wood coatings, road marking paints, masonry paints and concrete. Vea Menos | |
| EBECRYL® 780 | Allnex | EBECRYL® 780 is a highly functional, carboxylic acid containing methacrylate oligomer diluted in 2-methoxy-1-propanol solvent. EBECRYL® 780 exhibits good cure speed, good gloss characteristics, low shrinkage and good adhesion to metal. It is especially su...Vea Mas EBECRYL® 780 is a highly functional, carboxylic acid containing methacrylate oligomer diluted in 2-methoxy-1-propanol solvent. EBECRYL® 780 exhibits good cure speed, good gloss characteristics, low shrinkage and good adhesion to metal. It is especially suitable for use in the topcoat of vacuum metallized cosmetic and filmic applications. Vea Menos | Request Sample |
| Unithane IC-551 NF | Union Specialties, Inc. | Unithane IC-551 NF is an anionic NMP free and APEO free dispersion that provides good gloss, flexibility, and adhesion properties. This product has a gloss at 60º of 86 and a viscosity at 25°C of 150cps. It is often designed for industrial coatings, inter...Vea Mas Unithane IC-551 NF is an anionic NMP free and APEO free dispersion that provides good gloss, flexibility, and adhesion properties. This product has a gloss at 60º of 86 and a viscosity at 25°C of 150cps. It is often designed for industrial coatings, interior coatings, paints, graphic arts, adhesives and primers. Vea Menos | |
| Harcryl® 1228 UV | Harcros Chemicals, Inc. | Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion...Vea Mas Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. Vea Menos | |
| Harcryl® 1228 M UV | Harcros Chemicals, Inc. | Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic than Harcryl® 1228. Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion...Vea Mas Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic than Harcryl® 1228. Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M UV to be easily incorporated into many coating systems. including UV & Radiation curable coatings. Vea Menos | |
| ALQUIMEX S-50T | Polimeros Sinteticos, S.A de C.V | Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requirements with drying, adhesion...Vea Mas Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requirements with drying, adhesion, flexibility, abrasion, exudation and resistance to the gasoline, as well as the resistance outdoors. Vea Menos | |
| PHENODUR® PR 566/65BX | Allnex | PHENODUR® PR 566 is a Bisphenol A - free, heat-curing, non-plasticized phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE & BPA-NI lacquers) as well as phenolic/epoxy resin systems for the interior and exterior layer of metal containers with high adhesion...Vea Mas PHENODUR® PR 566 is a Bisphenol A - free, heat-curing, non-plasticized phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE & BPA-NI lacquers) as well as phenolic/epoxy resin systems for the interior and exterior layer of metal containers with high adhesion, excellent flexibility and good chemical resistance. Vea Menos | Request Sample |
| CRYLCOAT® 2451-6 | Allnex | CRYLCOAT® 2451-6 is a low viscosity carboxyl- functional polyester resin for use with TGIC in the production of low bake powder coatings as shown in cure curve for 93/7 ratio. Coatings based on CRYLCOAT® 2451-6 cured at 10 min x 150°C combine excellent flexibility, adhesion...Vea Mas CRYLCOAT® 2451-6 is a low viscosity carboxyl- functional polyester resin for use with TGIC in the production of low bake powder coatings as shown in cure curve for 93/7 ratio. Coatings based on CRYLCOAT® 2451-6 cured at 10 min x 150°C combine excellent flexibility, adhesion, gloss and film hardness. Vea Menos | Request Sample |
| CYMEL® U-1052-8 | Allnex | La resina CYMEL® U-1052-8 es un agente reticulador de urea y formaldehido n-butilado suministrado en una mezcla de n-butanol y sileno. Tiene una excelente compatibilidad con resinas epoxi y es particularmente adecuado para revestimientos interiores de lat...Vea Mas La resina CYMEL® U-1052-8 es un agente reticulador de urea y formaldehido n-butilado suministrado en una mezcla de n-butanol y sileno. Tiene una excelente compatibilidad con resinas epoxi y es particularmente adecuado para revestimientos interiores de latas, donde contribuye a la buena adhesión y a la resistencia a la pasteurización. Vea Menos | Request Sample |
| Silane Coupling Agent KH-560 | Zhejiang Feidian Chemical Co., Ltd. | KH-560 es un silano epoxi-funcional. Es un líquido de color claro. Puede utilizarse como agente de acoplamiento en masillas de polisulfuro y poliuretano y selladores, en aditivos minerales o en materiales termoestables y termoplásticos reforzados con vidr...Vea Mas KH-560 es un silano epoxi-funcional. Es un líquido de color claro. Puede utilizarse como agente de acoplamiento en masillas de polisulfuro y poliuretano y selladores, en aditivos minerales o en materiales termoestables y termoplásticos reforzados con vidrio y en aglutinantes en tejidos de vidrio. KH-560 se utiliza particularmente como un aditivo para promover la adherencia de sistemas a base de agua, por ejemplo, mejora la adherencia de selladores de látex acrílico. Vea Menos | |
| Dispersion EA – 419 F2 | Opalion | Se trata de una nueva dispersión acrílica estirénica de bajo tamaño de partícula y muy alta reticulación a bajas temperaturas, lo que le da mayor resistencia física y química. Aplicable a formulaciones de ceras para pisos al agua, su película imparte a la...Vea Mas Se trata de una nueva dispersión acrílica estirénica de bajo tamaño de partícula y muy alta reticulación a bajas temperaturas, lo que le da mayor resistencia física y química. Aplicable a formulaciones de ceras para pisos al agua, su película imparte a las formulaciones un brillo inigualable, dureza, adhesión y resistencia a agentes limpiadores. Vea Menos | |
| EBECRYL® 3500 | Allnex | EBECRYL® 3500 es un diacrilato epoxi modificado que presenta una viscosidad relativamente baja, un rendimiento excepcional en muchas aplicaciones de recubrimiento de madera y adhesión a gran cantidad de plásticos. Las películas de EBECRYL® 3500 curadas po...Vea Mas EBECRYL® 3500 es un diacrilato epoxi modificado que presenta una viscosidad relativamente baja, un rendimiento excepcional en muchas aplicaciones de recubrimiento de madera y adhesión a gran cantidad de plásticos. Las películas de EBECRYL® 3500 curadas por luz ultravioleta (UV) o haz de electrones (EB) exhiben buena flexibilidad, alto brillo, dureza, adherencia y resistencia superior a los productos químicos. Se recomienda el uso de EBECRYL® 3500 en: acabados de madera y selladores, revestimientos transparentes para el papel, y plásticos flexibles y rígidos, barnices de decoración de metal, adhesivos para laminación de papel o película, y vehículos para tintas litográficas y serigráficas. Vea Menos | Request Sample |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion...Vea Mas KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. Vea Menos | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion...Vea Mas KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. Vea Menos | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion...Vea Mas KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. Vea Menos | |
| Unithane IC-501 | Union Specialties, Inc. | Unithane IC-501 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has adhesion and tack-free properties. This product has a gloss at 60º of 85 and a viscosity at 25°C of 100cps. It is designed for use in a f...Vea Mas Unithane IC-501 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has adhesion and tack-free properties. This product has a gloss at 60º of 85 and a viscosity at 25°C of 100cps. It is designed for use in a formulated primer coat for paints, graphic arts, adhesives, and primers. Vea Menos | |
| Picassian® PU-551 | Stahl Polymers | Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing pr...Vea Mas Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing properties, good wetting properties, good flow properties, good flexibility properties, and good blocking resistance properties. Vea Menos | |
| SILVET® AD Ultra 015 | Silberline Manufacturing Co., Inc. | SILVET® AD Ultra 015 is a low dusting aluminum pigment that is widely compatible with a medium-fine particle size. This product is designed to provide narrow particle size distribution, opacity, adhesion, and a strong silver-dollar coloring in solvent-bas...Vea Mas SILVET® AD Ultra 015 is a low dusting aluminum pigment that is widely compatible with a medium-fine particle size. This product is designed to provide narrow particle size distribution, opacity, adhesion, and a strong silver-dollar coloring in solvent-based inks. SILVET® AD Ultra 015 is non-leafing and 99% non-volatile by weight. Vea Menos | |
| Picassian® PU-518 | Stahl Polymers | Picassian® PU-518 is a non reactive, high molecular weighted, semi aliphatic polyether modified polyurethane resin. It is used in flexo and gravure inks, and as an adhesive promoter. This product is Tin free, TDI free, has good adhesion properties on alum...Vea Mas Picassian® PU-518 is a non reactive, high molecular weighted, semi aliphatic polyether modified polyurethane resin. It is used in flexo and gravure inks, and as an adhesive promoter. This product is Tin free, TDI free, has good adhesion properties on aluminium foil, is soluble in alcohol rich mixtures, and is fully compatible with alcohol soluble nitrocellulose. Vea Menos | |
| SILVET® AD 015 | Silberline Manufacturing Co., Inc. | SILVET® AD 015 is a bright, low dusting aluminum pigment with a medium-fine, granular, corn-flake particle size. This product is designed to maximize formulation flexibility while ensuring easy dispersibility in printing ink applications. SILVET® AD 015 is especially suitable for solvent-based gravure and flexographic inks where optimal opacity and adhesion...Vea Mas SILVET® AD 015 is a bright, low dusting aluminum pigment with a medium-fine, granular, corn-flake particle size. This product is designed to maximize formulation flexibility while ensuring easy dispersibility in printing ink applications. SILVET® AD 015 is especially suitable for solvent-based gravure and flexographic inks where optimal opacity and adhesion are required. Vea Menos | |
| CYMEL® 5010 | Allnex | La resina CYMEL® 5010 es una resina de benzoguanamina parcialmente n-butilada suministrada en una mezcla de n-butanol y xileno y está diseñada para revestimientos a base de solventes. Al igual que otras resinas de benzoguanamina, este producto proporcion...Vea Mas La resina CYMEL® 5010 es una resina de benzoguanamina parcialmente n-butilada suministrada en una mezcla de n-butanol y xileno y está diseñada para revestimientos a base de solventes. Al igual que otras resinas de benzoguanamina, este producto proporciona excelente adhesión y resistencia química al revestimiento, aunque no requiere un catalizador externo en la formulación. Vea Menos | Request Sample |
| Hydro-Rez™ 1000D A | Lawter | Hydro-Rez™ 1000D A is a water-based sulfo polyester polymer dispersion that can be used in combination with a higher Tg sulfo polyester polymer as a plasticizing resin or just as a lone resin. When it is used as a plasticizer, the polymer improves film formation, adhesion and flexibility on non-absorbent substrates. The product is a stable dispersion with no surfactants or solvents. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The polymer has the benefit of giving off gloss, adhesion...Vea Mas Hydro-Rez™ 1000D A is a water-based sulfo polyester polymer dispersion that can be used in combination with a higher Tg sulfo polyester polymer as a plasticizing resin or just as a lone resin. When it is used as a plasticizer, the polymer improves film formation, adhesion and flexibility on non-absorbent substrates. The product is a stable dispersion with no surfactants or solvents. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The polymer has the benefit of giving off gloss, adhesion, transparency, fast drying speeds, low odor and scuff resistance on coatings, inks and primers. It is ideally suited for use in water-based primers and coatings or in water-based gravure and flexo inks. Vea Menos | |
| Harcryl® 1228 M | Harcros Chemicals, Inc. | Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic than Harcryl® 1228. The main application for Harcryl® 1228M is emulsion polymerization. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion...Vea Mas Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic than Harcryl® 1228. The main application for Harcryl® 1228M is emulsion polymerization. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M to be easily incorporated into many coating systems. Vea Menos | |
| Flex-rez™ 1074CS A | Lawter | Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The pr...Vea Mas Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The product is used in gravure and flexographic inks, overprint varnishes and cold seal release lacquers. Vea Menos | |
| ROSKYDAL® E 70 | Allnex | ROSKYDAL® E 70 is a highly flexible, unsaturated polyester resin containing paraffin-wax, which is used as a flexibilizing resin for wax-free polyester, UV-curing styrene systems. The addition of ROSKYDAL® E 70 improves the polishability and sandability of films and improves the adhesion...Vea Mas ROSKYDAL® E 70 is a highly flexible, unsaturated polyester resin containing paraffin-wax, which is used as a flexibilizing resin for wax-free polyester, UV-curing styrene systems. The addition of ROSKYDAL® E 70 improves the polishability and sandability of films and improves the adhesion to medium density fiberboard, metal car body components and some plastics. Vea Menos | Request Sample |
| SETALUX® 17-7202 | Allnex | SETALUX® 17-7202 is an acetoacetate functional acrylic resin that is combined with a ketimine resin (SETALUX® 10-1440) to form the NISO nonisocyanate "Ketac" system primer. This system provides very fast dry and cure speed at room temperature. This "Ketac" system also provides good sanding, good adhesion...Vea Mas SETALUX® 17-7202 is an acetoacetate functional acrylic resin that is combined with a ketimine resin (SETALUX® 10-1440) to form the NISO nonisocyanate "Ketac" system primer. This system provides very fast dry and cure speed at room temperature. This "Ketac" system also provides good sanding, good adhesion to various substrates and good enamel hold out. Vea Menos | Request Sample |
| EBECRYL® 570 | Allnex | EBECRYL® 570 is a chlorine free polyester resin diluted with of EBECRYL® 40. This resin provides good adhesion to plastic substrates. Films of EBECRYL® 570 cured by ultraviolet light (UV) or electron beam (EB) have low odour. It is recommended for use in:...Vea Mas EBECRYL® 570 is a chlorine free polyester resin diluted with of EBECRYL® 40. This resin provides good adhesion to plastic substrates. Films of EBECRYL® 570 cured by ultraviolet light (UV) or electron beam (EB) have low odour. It is recommended for use in: sensitive applications such as food packaging, and over print varnishes for plastic and metallic substrates. Vea Menos | Request Sample |
| MODAFLOW® Resin | Allnex | Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion...Vea Mas Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion. Vea Menos | Request Sample |
| EBECRYL® 1205 | Allnex | EBECRYL® 1205 is an acrylic acrylate resin containing hydroxyl functionality and is supplied in ~48% by weight of butyl acetate. It is designed for use in dual cure systems combining ultraviolet (UV) or electron beam (EB) radical cure along with isocyanate/hydroxyl reaction. EBECRYL® 1205 is also useful as adhesion...Vea Mas EBECRYL® 1205 is an acrylic acrylate resin containing hydroxyl functionality and is supplied in ~48% by weight of butyl acetate. It is designed for use in dual cure systems combining ultraviolet (UV) or electron beam (EB) radical cure along with isocyanate/hydroxyl reaction. EBECRYL® 1205 is also useful as adhesion promoter in coatings standard UV/EB energy cured systems. Vea Menos | Request Sample |
| EBECRYL® 438 | Allnex | Ebecryl® 438 es una resina de poliéster clorada reactiva diluida al 40% con el diluyente reactivo OTA-480. Presenta buen comportamiento litográfico y propiedades humectantes de pigmentos, y respuesta rápida de curado en revestimientos y tintas curables en...Vea Mas Ebecryl® 438 es una resina de poliéster clorada reactiva diluida al 40% con el diluyente reactivo OTA-480. Presenta buen comportamiento litográfico y propiedades humectantes de pigmentos, y respuesta rápida de curado en revestimientos y tintas curables en luz ultravioleta (UV). Las películas de EBECRYL® 438 curadas mediante luz ultravioleta (UV) muestran buena adherencia a los metales, plásticos y papel. EBECRYL® 438 se recomienda para: tintas litográficas húmedas para papel, plásticos y metales, lo que promueve la adhesión a revestimientos sobre metales, plásticos y papel, barnices de sobreimpresión aplicados por litografía y tintas post-conformables. Vea Menos | Request Sample |
| EBECRYL® 525 | Allnex | Ebecryl® 525 es una resina de poliéster modificada con ácidos diluida con 40% dediacrilato de tripropilenglicol. Las películas de Ebecryl® 525 curadas por UV o EB son suaves y flexibles, con una buena adherencia al papel, los plásticos y los metales, lo c...Vea Mas Ebecryl® 525 es una resina de poliéster modificada con ácidos diluida con 40% dediacrilato de tripropilenglicol. Las películas de Ebecryl® 525 curadas por UV o EB son suaves y flexibles, con una buena adherencia al papel, los plásticos y los metales, lo cual da lugar a que este producto sea especialmente adecuado para su uso en adhesivos de laminación. Se recomienda en: vehículos de tintas serigráficas con una buena adherencia entre capas, capa de imprimación adherente sobre metales, y adhesivos de laminación, sobre todo entre el papel/aluminio, papel/polietileno de baja densidad (LDPE), papel/polipropileno y aluminio/LDPE. Vea Menos | Request Sample |
| Unithane IC-505 | Union Specialties, Inc. | Unithane IC-505 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It i...Vea Mas Unithane IC-505 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is suitable for use in a formulated primer coat for concrete, automotive, metal, graphic arts, and adhesives. Vea Menos | |
| Unithane IC-901 | Union Specialties, Inc. | Unithane IC-901 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 10-200cps. It...Vea Mas Unithane IC-901 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 10-200cps. It is suitable for use in a formulated primer coat for concrete, graphic arts, adhesives, and exterior coatings. Vea Menos | |
| HS9630 | Tianyi Chemical Engineering Material Co., Ltd. | HS9630, in the form of a transparent liquid, is a reactive monomer resin that can be used in paints, inks, and as a binder in adhesives. This product shows good weather resistance and adhesion to plastics. If one increases the number of acrylate or meth...Vea Mas HS9630, in the form of a transparent liquid, is a reactive monomer resin that can be used in paints, inks, and as a binder in adhesives. This product shows good weather resistance and adhesion to plastics. If one increases the number of acrylate or methacrylic ester optical activity groups, one will increase its cure rate with high rigidity and good dilution effects. Vea Menos | |
| CYMEL® 1161 | Allnex | La resina CYMEL® 1161 es un reticulante de melamina metilado/iso-butilado altamente monomérico con un alto grado de alquilación. Su alto contenido de monómero permite la formulación de revestimientos de alto contenido de sólidos con aspecto, adhesión al r...Vea Mas La resina CYMEL® 1161 es un reticulante de melamina metilado/iso-butilado altamente monomérico con un alto grado de alquilación. Su alto contenido de monómero permite la formulación de revestimientos de alto contenido de sólidos con aspecto, adhesión al revestimiento y flexibilidad excelentes. Está especialmente recomendado para capas protectoras de la industria automotriz, acabados metálicos en general, y revestimiento de bobinas. Vea Menos | Request Sample |
| R-2100-3 | NuSil Silicone Technology 1 | R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal ...Vea Mas R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. Vea Menos | |
| R-2100-6 | NuSil Silicone Technology 1 | R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...Vea Mas R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. Vea Menos | |
| BYK®-4509 | BYK | BYK-4509 es un promotor de adherencia para sistemas acuosos y a base de solventes aplicado a sustratos mecánicos. Es compatible con la mayoría de los aglutinantes y, por lo tanto, es ideal para uso universal. Este producto es una sal de un polímero con gr...Vea Mas BYK-4509 es un promotor de adherencia para sistemas acuosos y a base de solventes aplicado a sustratos mecánicos. Es compatible con la mayoría de los aglutinantes y, por lo tanto, es ideal para uso universal. Este producto es una sal de un polímero con grupos acídicos. Vea Menos | |
| BECKOPOX™ EP 385w/56WA | Allnex | Resina de epoxi sólida, flexibilizada, dispersión en agua. Las formulaciones tienen buena adherencia a diversos plásticos tales como PC, PA, Poliuretano y para laminados UP. | Request Sample |
| MACRYNAL® SM 500/60X | Allnex | Macrynal® SM 500/60X es una resina acrílica hidroxi-funcional, reticulable con poliisocianatos con alto brillo, buenas propiedades mecánicas y una buena adherencia a los metales y sustratos de plástico. | Request Sample |
| Reactol™ 1717H A | Lawter | Reactol™ 1717H A is a polyketone resin with high alcohol solubility and whose high melt point ensures improved heat resistance and better blocking resistance than other resins in the group. The resin exhibits high polarity allowing for improved pigment wetting, gloss and adhesion...Vea Mas Reactol™ 1717H A is a polyketone resin with high alcohol solubility and whose high melt point ensures improved heat resistance and better blocking resistance than other resins in the group. The resin exhibits high polarity allowing for improved pigment wetting, gloss and adhesion. Reactol™ 1717H A is used in vinyl sealers and coatings, cellulose lacquers and in flexographic and rotogravure inks. Vea Menos | |
| EBECRYL® 118 | Allnex | EBECRYL® 118 is an aromatic monofunctional acrylate that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. It is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg and increase flexibility of the UV/EB cured polymer while maintaining strength and toughness and improve substrate adhesion...Vea Mas EBECRYL® 118 is an aromatic monofunctional acrylate that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. It is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg and increase flexibility of the UV/EB cured polymer while maintaining strength and toughness and improve substrate adhesion. Vea Menos | Request Sample |
| EBECRYL® 524 | Allnex | EBECRYL® 524 es un poliéster modificado con ácidos diluido al 30% en peso con el diluyente reactivo 1,6-hexanodiol diacrilato (HDODA)(1). Se utiliza como el oligómero primario o de modificación en formulaciones curables por UV o EB para aumentar la adhere...Vea Mas EBECRYL® 524 es un poliéster modificado con ácidos diluido al 30% en peso con el diluyente reactivo 1,6-hexanodiol diacrilato (HDODA)(1). Se utiliza como el oligómero primario o de modificación en formulaciones curables por UV o EB para aumentar la adherencia a una variedad de sustratos, incluido el papel, plástico y metal. Se recomienda para: adhesivos de laminación, en particular entre el papel/aluminio, papel/polietileno de baja densidad (LDPE), papel/polipropileno y aluminio/LDPE, revestimientos de imprimación sobre metal, revestimientos receptores de metalización sobre plásticos, y la mejora de la adherencia entre capas Vea Menos | Request Sample |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...Vea Mas Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. Vea Menos | |
| Picassian® PU-539 | Stahl Polymers | Picassian® PU-539 is a non-reactive, medium hard, aromatic, polyether modified polyurethane resin. It is used in polymeric plasticizing resins, flexo and gravure printing inks, and in OPVs. This product is tin free, TDI free, complete soluble in alcohol, has good heat seal resistance properties, has good blocking resistance properties, and has a good balance of adhesion...Vea Mas Picassian® PU-539 is a non-reactive, medium hard, aromatic, polyether modified polyurethane resin. It is used in polymeric plasticizing resins, flexo and gravure printing inks, and in OPVs. This product is tin free, TDI free, complete soluble in alcohol, has good heat seal resistance properties, has good blocking resistance properties, and has a good balance of adhesion and alcohol solubility. Vea Menos | |
| SETAL® 21-3462 | Allnex | SETAL 21-3462 is a high solids long-oil alkyd resin designed for use in color retentive, durable, exterior grade trade sales paints. This resin is frequently used as a modifier for acrylic and polyvinyl acrylate-based latex paints to improve adhesion over...Vea Mas SETAL 21-3462 is a high solids long-oil alkyd resin designed for use in color retentive, durable, exterior grade trade sales paints. This resin is frequently used as a modifier for acrylic and polyvinyl acrylate-based latex paints to improve adhesion over chalky substrates. SETAL 21-3462 also improves brushing qualities of medium and long oil based house paints. Vea Menos | Request Sample |
| PHENODUR® PR 401/72B | Allnex | PHENODUR® PR 401 72% B is a curable unplasticized phenolic resin. It is recommended for coating the interior and exterior surfaces of packaging containers and cans; as high adhesion, chemically resistant protective coatings for apparatus, vessels, pipelin...Vea Mas PHENODUR® PR 401 72% B is a curable unplasticized phenolic resin. It is recommended for coating the interior and exterior surfaces of packaging containers and cans; as high adhesion, chemically resistant protective coatings for apparatus, vessels, pipelines, etc.; for heatcuring phenolic/epoxide resin combinations; for heatcuring phenolic/polyvinylbutyral combinations and for physically drying paints with resistance to fuel and oil. Vea Menos | Request Sample |
| Optirub™ PC A | Lawter | Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC ...Vea Mas Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC A is suitable for use in flexographic and gravure inks, in heatset and sheet-fed inks and in UV metal deco inks. Vea Menos | |
| DAOTAN® TW 6425/40WA | Allnex | Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly flexible coating systems especially for primers for plastics. Such systems have very good adhesion...Vea Mas Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly flexible coating systems especially for primers for plastics. Such systems have very good adhesion to polyamide, polycarbonate, ABS, as well as pretreated PP/EPDM. Vea Menos | Request Sample |
| SILVET® AD 007 | Silberline Manufacturing Co., Inc. | SILVET® AD 007 is a dry and low dusting aluminum pigment with a fine, granular, corn-flake particle size. This product is designed to provide dispersing capabilities and adhesion in printing ink applications including solvent-based gravure and flexographi...Vea Mas SILVET® AD 007 is a dry and low dusting aluminum pigment with a fine, granular, corn-flake particle size. This product is designed to provide dispersing capabilities and adhesion in printing ink applications including solvent-based gravure and flexographic inks. SILVET® AD 007 is 99% non-volatile by weight and is also used to display optimal opacity in polymer films. Vea Menos | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...Vea Mas Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. Vea Menos | |
| SILVET® AD 101 | Silberline Manufacturing Co., Inc. | SILVET® AD 101 is a dry and low dusting aluminum pigment with an ultra- fine, granular, corn-flake particle size. This product is designed to provide dispersing capabilities and adhesion in printing ink applications including solvent-based gravure and fle...Vea Mas SILVET® AD 101 is a dry and low dusting aluminum pigment with an ultra- fine, granular, corn-flake particle size. This product is designed to provide dispersing capabilities and adhesion in printing ink applications including solvent-based gravure and flexographic inks. SILVET® AD 101 is 99% non-volatile by weight and is also used to display optimal opacity in polymer films. Vea Menos | |
| EBECRYL® 5848 | Allnex | EBECRYL® 5848 is an epoxidized soya oil acrylate based in part on renewable resources. EBECRYL® 5848 provides improved flow, levelling and pigment wetting in ultraviolet light (UV) or electron beam (EB) energy curable inks and coatings. Adhesion and flexi...Vea Mas EBECRYL® 5848 is an epoxidized soya oil acrylate based in part on renewable resources. EBECRYL® 5848 provides improved flow, levelling and pigment wetting in ultraviolet light (UV) or electron beam (EB) energy curable inks and coatings. Adhesion and flexibility are often enhanced when EBECRYL® 5848 is used as a modifier in inks and clear or pigmented coatings on paper and metal. Vea Menos | Request Sample |
| ALNOVOL® PN 760 | Allnex | ALNOVOL® PN 760/PAST is a non self-crosslinking modified phenol novolac. The resin is used in rubber compounds as adhesion promoter for steel and textile cord. Alnovol® PN 760 is incorporated into the mix in the first stage of compounding. Due to the low ...Vea Mas ALNOVOL® PN 760/PAST is a non self-crosslinking modified phenol novolac. The resin is used in rubber compounds as adhesion promoter for steel and textile cord. Alnovol® PN 760 is incorporated into the mix in the first stage of compounding. Due to the low content of free phenol processing does not generate any vapors and it is not accompanied by odorous annoyance. Vea Menos | Request Sample |
| EBECRYL® 210 | Allnex | EBECRYL® 210 is an aromatic urethane diacrylate oligomer. Films of EBECRYL® 210 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, light colour and good adhesion to various substrates. It is recommended for use in: coatings on...Vea Mas EBECRYL® 210 is an aromatic urethane diacrylate oligomer. Films of EBECRYL® 210 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, light colour and good adhesion to various substrates. It is recommended for use in: coatings on rigid and flexible plastics, wood coatings, screen inks, low gloss coatings, conformal coatings, and flexibilizing other UV/EB curable products. Vea Menos | Request Sample |
| CYREZ® 963 Product Family (100% HMMM) | Allnex | CYREZ® 963 resins are a portfolio of HMMM liquid resins used as a crosslinker for adhesion promoting and reinforcing systems in rubber applications. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. CYREZ...Vea Mas CYREZ® 963 resins are a portfolio of HMMM liquid resins used as a crosslinker for adhesion promoting and reinforcing systems in rubber applications. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. CYREZ 963 products are available globally and producted in multiple manufacturing locations. Please contact your allnex representative regarding product availability in specific countries and regions. Vea Menos | Request Sample |
| Resipint 32 | Simon Quimica | Resipint 32 es un revestimiento para el hormigón, donde se requiere una alta resistencia a la abrasión, brillo y adherencia. Es viscosidad es 100-500 cps un 25C, y% de sólidos es de 62 +/- 2. | |
| MACRYNAL® SM 540/60X | Allnex | Macrynal® SM 540/60X es una resina acrílica hidroxi-funcional, reticulable con poliisocianatos con alto brillo, buenas propiedades mecánicas y una buena adherencia a los metales y sustratos de plástico. | Request Sample |
| UCECRYL® B 3022 | Allnex | UCECRYL B 3022 es un copolímero de emulsión de acrícilico lineal con una MFFT media. Presenta buena adherencia sobre numerosos sustratos, así como una buena resistencia al blanqueamiento al agua, y buena resistencia a las condiciones climáticas. | Request Sample |
| EBECRYL® 411 | Allnex | EBECRYL® 411 es una resina de poliéster modificada para aplicaciones flexográficas de tejido estrecho y de serigrafía rotativa. Se desarrolló para tintas y revestimientos de baja viscosidad con una excelente adherencia a las películas de OPP no imprimadas...Vea Mas EBECRYL® 411 es una resina de poliéster modificada para aplicaciones flexográficas de tejido estrecho y de serigrafía rotativa. Se desarrolló para tintas y revestimientos de baja viscosidad con una excelente adherencia a las películas de OPP no imprimadas. EBECRYL® 411 se diluye con monómero de diacrilato de dipropilenglicol (DPGDA)(1). Vea Menos | Request Sample |
