| Fujicure 5003-D | Sanho Chemical Co., Ltd. | Fujicure 5003-D is a modified cycloaliphatic amine in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.10. Fujicure 5003-D is most commonly used in coating formulation applications. | |
| Fujicure 5250 | Sanho Chemical Co., Ltd. | Fujicure 5250 is a modified cycloaliphatic polyamine in a light yellow-colored viscous liquid form. This product has a viscosity of 6000-14,000 mPa.s and a specific gravity of 1.10. Fujicure 5250 is most commonly used in coating formulation applications. | |
| Fujicure 5260 | Sanho Chemical Co., Ltd. | Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications...Vea Mas Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications. Vea Menos | |
| Kingcure 800-C | Sanho Chemical Co., Ltd. | Kingcure 800-C is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingcure 800-C is most commonly used in construction adhesive formulation applications. | |
| Kingcure 800-F | Sanho Chemical Co., Ltd. | Kingcure 800-F is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s. Kingcure 800-F is most commonly used in construction adhesive formulation applications. | |
| Kingcure 800-S | Sanho Chemical Co., Ltd. | Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fa...Vea Mas Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fast-setting adhesive formulation applications. Vea Menos | |
| Kingcure E-325 | Sanho Chemical Co., Ltd. | Kingcure E-325 is a modified cycloaliphatic polyamine in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure E-325 is most commonly used in solvent-free coating formulation applications. | |
| Kingcure I-621 | Sanho Chemical Co., Ltd. | Kingcure I-621 is a modified cycloaliphatic diamine in a slightly yellow-colored viscous liquid form. This product has a viscosity of 1500-2500 mPa.s and a specific gravity of 1.02. Kingcure I-621 is most commonly used in coating formulation applications. | |
| Kingcure I-631 | Sanho Chemical Co., Ltd. | Kingcure I-631 is a modified cycloaliphatic diamine in a light yellow-colored viscous liquid form. This product has a viscosity of 70-170 mPa.s and a specific gravity of 1.03. Kingcure I-631 is most commonly used in concrete adhesive formulation applicati...Vea Mas Kingcure I-631 is a modified cycloaliphatic diamine in a light yellow-colored viscous liquid form. This product has a viscosity of 70-170 mPa.s and a specific gravity of 1.03. Kingcure I-631 is most commonly used in concrete adhesive formulation applications. Vea Menos | |
| Kingmide 300 | Sanho Chemical Co., Ltd. | Kingmide 300 is a high molecular weight, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 200-600 mPa.s and a specific gravity of 0.97. Kingmide 300 is most commonly used in coating formulation applicatio...Vea Mas Kingmide 300 is a high molecular weight, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 200-600 mPa.s and a specific gravity of 0.97. Kingmide 300 is most commonly used in coating formulation applications where increased adhesion, chemical-resistance, and water-resistance are required. Vea Menos | |
| Kingmide 310 | Sanho Chemical Co., Ltd. | Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive a...Vea Mas Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive and coating formulation applications. Vea Menos | |
| Kingmide 315-S | Sanho Chemical Co., Ltd. | Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-co...Vea Mas Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-corrosive coating formulation applications. Vea Menos | |
| Kingmide 338 | Sanho Chemical Co., Ltd. | Kingmide 338 is a low-viscosity, ractive polyamide resin in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s and a specific gravity of 0.97. Kingmide 338 is most commonly used in adhesive and putty formulation ap...Vea Mas Kingmide 338 is a low-viscosity, ractive polyamide resin in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s and a specific gravity of 0.97. Kingmide 338 is most commonly used in adhesive and putty formulation applications. Vea Menos | |
| Kingmide 340 | Sanho Chemical Co., Ltd. | Kingmide 340 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 400-600 mPa.s and a specific gravity of 0.96. Kingmide 340 is most commonly used in coating, mortar, adhesive, and putty form...Vea Mas Kingmide 340 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 400-600 mPa.s and a specific gravity of 0.96. Kingmide 340 is most commonly used in coating, mortar, adhesive, and putty formulation applications. Vea Menos | |
| Kingmide 370 | Sanho Chemical Co., Ltd. | Kingmide 370 is a medium-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 2500-4500 mPa.s and a specific gravity of 0.95. Kingmide 370 is most commonly used in adhesive and putty formulation appli...Vea Mas Kingmide 370 is a medium-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 2500-4500 mPa.s and a specific gravity of 0.95. Kingmide 370 is most commonly used in adhesive and putty formulation applications. Vea Menos | |
| Kingmide 374-L | Sanho Chemical Co., Ltd. | Kingmide 374-L is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.95. Kingmide 374-L is most commonly used in mortar, adhesive, and putty formulati...Vea Mas Kingmide 374-L is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.95. Kingmide 374-L is most commonly used in mortar, adhesive, and putty formulation applications. Vea Menos | |
| Kingmide 530 | Sanho Chemical Co., Ltd. | Kingmide 530 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 105-115°C. Kingmide 530 is most commonly used in rotogravure printing ink and alkyd varnish formulation applications. | |
| Kingmide 533 | Sanho Chemical Co., Ltd. | Kingmide 533 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 100-110°C. Kingmide 533 is most commonly used in flexographic printing ink formulation applications. | |
| Kingmide 549 | Sanho Chemical Co., Ltd. | Kingmide 549 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 112-119°C. Kingmide 549 is most commonly used in flexographic printing ink formulation applications. | |
| Kingmide 550 | Sanho Chemical Co., Ltd. | Kingmide 550 is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550 is most commonly used in rotogravure printing ink formulation applications. | |
| Kingmide 550-A | Sanho Chemical Co., Ltd. | Kingmide 550-A is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550-A is most commonly used in hot-melt adhesive formulation applications. | |
| Kingmide 550-G | Sanho Chemical Co., Ltd. | Kingmide 550-G is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550-G is most commonly used in hot-melt adhesive formulation applications. | |
| Kingmide 551 | Sanho Chemical Co., Ltd. | Kingmide 551 is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C and an application temperature of 150-180°C. Kingmide 551 is most commonly used in hot-melt adhesive formulation applica...Vea Mas Kingmide 551 is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C and an application temperature of 150-180°C. Kingmide 551 is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide 705 | Sanho Chemical Co., Ltd. | Kingmide 705 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 150-400 mPa.s and a specific gravity of 0.98. Kingmide 705 is most commonly used in mortar, putty, and adhesive formulation a...Vea Mas Kingmide 705 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 150-400 mPa.s and a specific gravity of 0.98. Kingmide 705 is most commonly used in mortar, putty, and adhesive formulation applications. Vea Menos | |
| Kingmide 715-A | Sanho Chemical Co., Ltd. | Kingmide 715-A is a medium viscosity, modified polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s. Kingmide 715-A is most commonly used in putty and adhesive formulation applications. | |
| Kingmide H-110 | Sanho Chemical Co., Ltd. | Kingmide H-110 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Kingmide H-110 is most commonly used in hot-melt adhesive formulation application...Vea Mas Kingmide H-110 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Kingmide H-110 is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide H-120 | Sanho Chemical Co., Ltd. | Kingmide H-120 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2200-2800 mPa.s and a softening point of 115-125°C. Kingmide H-120 is most commonly used in hot-melt adhesive formulation applicatio...Vea Mas Kingmide H-120 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2200-2800 mPa.s and a softening point of 115-125°C. Kingmide H-120 is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide H-130 | Sanho Chemical Co., Ltd. | Kingmide H-130 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 125-135°C. Kingmide H-130 is most commonly used in hot-melt adhesive formulation applicatio...Vea Mas Kingmide H-130 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 125-135°C. Kingmide H-130 is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide H-130W | Sanho Chemical Co., Ltd. | Kingmide H-130W is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2500-5000 mPa.s and a softening point of 125-135°C. Kingmide H-130W is most commonly used in hot-melt adhesive formulation applicat...Vea Mas Kingmide H-130W is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2500-5000 mPa.s and a softening point of 125-135°C. Kingmide H-130W is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide H-135GC | Sanho Chemical Co., Ltd. | Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applic...Vea Mas Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide H-140HP | Sanho Chemical Co., Ltd. | Kingmide H-140HP is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 140-150°C. Kingmide H-140HP is most commonly used in hot-melt adhesive formulation appl...Vea Mas Kingmide H-140HP is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 140-150°C. Kingmide H-140HP is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide H-170HV | Sanho Chemical Co., Ltd. | Kingmide H-170HV is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 3000-7000 mPa.s and a softening point of 165-175°C. Kingmide H-170HV is most commonly used in hot-melt adhesive formulation applic...Vea Mas Kingmide H-170HV is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 3000-7000 mPa.s and a softening point of 165-175°C. Kingmide H-170HV is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide X-2100 | Sanho Chemical Co., Ltd. | Kingmide X-2100 is a medium viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 6000-12,000 mPa.s and a specific gravity of 1.04. Kingmide X-2100 is most commonly used in adhesive, coating, ...Vea Mas Kingmide X-2100 is a medium viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 6000-12,000 mPa.s and a specific gravity of 1.04. Kingmide X-2100 is most commonly used in adhesive, coating, and putty formulation applications. Vea Menos | |
| Kingmide X-220B | Sanho Chemical Co., Ltd. | Kingmide X-220B is a low viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s. Kingmide X-220B is most commonly used in adhesive, coating, and patch repair mortar formulation ap...Vea Mas Kingmide X-220B is a low viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s. Kingmide X-220B is most commonly used in adhesive, coating, and patch repair mortar formulation applications. Vea Menos | |
| Natrosol™ B Hydroxyethylcellulose | Ashland | Natrosol™ B HEC, un polímero no iónico soluble en agua, es un polvo blanco, granular de flujo libre. Es insoluble en solventes orgánicos, sin embargo, se dispersa fácilmente en agua fría y caliente para ofrecer soluciones de diferentes viscosidades. Este ...Vea Mas Natrosol™ B HEC, un polímero no iónico soluble en agua, es un polvo blanco, granular de flujo libre. Es insoluble en solventes orgánicos, sin embargo, se dispersa fácilmente en agua fría y caliente para ofrecer soluciones de diferentes viscosidades. Este producto se utiliza como un espesante, coloide protector, aglutinante, estabilizador y agente de suspensión, en particular en aplicaciones donde se desea un material no iónico. Vea Menos | |
| PVP K-120 | Ashland | El Bic de Nuosept® es un preservativo a base de agua, FA-libre formulado con una mezcla única de BIT, de IPBC y de CMIT/MIT. El BIC de Nuosept ofrece rendimiento rápido de cubrir las manchas y eficacia de uso a largo plazo. Cumple con lo recomendado en ...Vea Mas El Bic de Nuosept® es un preservativo a base de agua, FA-libre formulado con una mezcla única de BIT, de IPBC y de CMIT/MIT. El BIC de Nuosept ofrece rendimiento rápido de cubrir las manchas y eficacia de uso a largo plazo. Cumple con lo recomendado en la etiqueta ecológica y es VOC (Compuesto Organico Volatil)-libre, el BIC de Nuosept ofrece excelente rendimiento y valor en emulsiones a base de agua. Vea Menos | |
| PVP K-15 | Ashland | Un sólido cristalino casi inodoro, sin polvo, de flujo libre usado como conservante de las sUSP (Farmacopea de los Estados Unidos)ensiones a base de agua preparadas industrialmente (pigmento en pasta, mezclas, pegamentos, polímeros y almidones), y como an...Vea Mas Un sólido cristalino casi inodoro, sin polvo, de flujo libre usado como conservante de las sUSP (Farmacopea de los Estados Unidos)ensiones a base de agua preparadas industrialmente (pigmento en pasta, mezclas, pegamentos, polímeros y almidones), y como antimicrobiano en los sistemas de recirculación de agua de refrigeración. Vea Menos | |
| PVP K-30 | Ashland | De color blanco , una emulsión termoplástica usada como polímero filmógeno en ceras, abrillantadores y almidones sintéticos, como revestimiento hidrofóbico para los medios de la impresión por chorros de tinta, y como componente frío de sellador adhesivo f...Vea Mas De color blanco , una emulsión termoplástica usada como polímero filmógeno en ceras, abrillantadores y almidones sintéticos, como revestimiento hidrofóbico para los medios de la impresión por chorros de tinta, y como componente frío de sellador adhesivo frio. Vea Menos | |
| PVP K-60 | Ashland | Una polividona que se considera que es fisiológicamente inerte y se Poliuretano ede plastificar con agua y la mayoría de los plastificantes orgánicos comunes. Las aplicaciones incluyen uso como baño quenchant del metal. | |
| PVP K-90 | Ashland | Una polivinilpirrolidona que se considera es fisiológicamente inerte y se Poliuretano ede plastificar con agua y la mayoría de los plastificantes orgánicos comunes. Es un producto versátil con muchas aplicaciones. | |
| Rapi-Cure™ DVB1D | Ashland | Una polividona que se considera estar fisiológico inerte y se Poliuretano ede plastificar con agua y la mayoría de los plastificantes orgánicos comunes. | |
| Rapi-Cure™ DVE-3 | Ashland | Es un polímero 1-Vinyl-2-Pyrrolidone del grado no-farmacéutico K-85 preservado con el CQ de 50 PPM Cosmocil. Las aplicaciones incluyen los palillos adhesivos estearato-basados para los artes y los artes. | |
| Rapi-Cure™ HBVE | Ashland | Una polividona que se considera estar fisiológico inerte y se Poliuretano ede plastificar con agua y la mayoría de los plastificantes orgánicos comunes. Hay muchas aplicaciones para este producto. | |
| Tohmide 1310 | Sanho Chemical Co., Ltd. | Tohmide 1310 is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 1500-4500 mPa.s and a softening point of 115-125°C. Tohmide 1310 is most commonly used in hot-melt adhesive formulation applications. | |
| Tohmide 1360 | Sanho Chemical Co., Ltd. | Tohmide 1360 is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 1500-4500 mPa.s and a softening point of 165-175°C. Tohmide 1360 is most commonly used in hot-melt adhesive formulation applications. | |
| Tohmide 225-R | Sanho Chemical Co., Ltd. | Tohmide 225-R is a medium viscosity, reactive polyaminoamide in a brown-colored viscous liquid form. This product has a viscosity of 3500-10,000 mPa.s and a specific gravity of 0.97. Tohmide 225-R is most commonly used in adhesive, sealant, putty, and sur...Vea Mas Tohmide 225-R is a medium viscosity, reactive polyaminoamide in a brown-colored viscous liquid form. This product has a viscosity of 3500-10,000 mPa.s and a specific gravity of 0.97. Tohmide 225-R is most commonly used in adhesive, sealant, putty, and surface coating formulation applications. Vea Menos | |
| Tohmide 245-HS | Sanho Chemical Co., Ltd. | Tohmide 245-HS is a very low viscosity, fatty polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 800-1100 cPs. Tohmide 245-HS is most commonly used in structural adhesive and protective coating formulation applications...Vea Mas Tohmide 245-HS is a very low viscosity, fatty polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 800-1100 cPs. Tohmide 245-HS is most commonly used in structural adhesive and protective coating formulation applications. Vea Menos | |
| Tohmide 390 | Sanho Chemical Co., Ltd. | Tohmide 390 is a solid-type polyamide resin in a brown pellet form. This product has a viscosity of 200-400 mPa.s and a softening point of 175-185°C. Tohmide 390 is most commonly used in hot-melt structural adhesive formulation applications. | |
| Tohmide 393 | Sanho Chemical Co., Ltd. | Tohmide 393 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 110-120°C. Tohmide 393 is most commonly used in rotogravure printing ink and varnish formulation applications. | |
| Tohmide 394 | Sanho Chemical Co., Ltd. | Tohmide 394 is a solid-type fatty polyamide resin in a brown pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Tohmide 394 is most commonly used in hot-melt structural adhesive formulation applications. | |
| Tohmide 394-N | Sanho Chemical Co., Ltd. | Tohmide 394-N is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 394-N is most commonly used in rotogravure printing ink formulation applications. | |
| Tohmide 558 | Sanho Chemical Co., Ltd. | Tohmide 558 is a solid-type fatty polyamide resin in a brown-colored pellet form. This product has a viscosity of 300-850 mPa.s and a softening point of 155-165°C. Tohmide 558 is most commonly used in structural hot-melt adhesive formulation applications. | |
| Tohmide 558-N | Sanho Chemical Co., Ltd. | Tohmide 558-N is a solid-type fatty polyamide resin in a brown-colored pellet form. This product has a viscosity of 300-800 mPa.s and a softening point of 155-165°C. Tohmide 558-N is most commonly used in structural hot-melt adhesive formulation applicati...Vea Mas Tohmide 558-N is a solid-type fatty polyamide resin in a brown-colored pellet form. This product has a viscosity of 300-800 mPa.s and a softening point of 155-165°C. Tohmide 558-N is most commonly used in structural hot-melt adhesive formulation applications. Vea Menos | |
| Tohmide 560 | Sanho Chemical Co., Ltd. | Tohmide 560 is a low-melting viscosity polyamide resin in a brown-colored pellet form. This product has a viscosity of 200-400 mPa.s and a softening point of 155-165°C. Tohmide 560 is most commonly used in hot-melt adhesive formulation applications. | |
| Tohmide 90 | Sanho Chemical Co., Ltd. | Tohmide 90 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 90 is most commonly used in rotogravure printing ink formulation applications. | |
| Tohmide 92 | Sanho Chemical Co., Ltd. | Tohmide 92 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 115-125°C. Tohmide 92 is most commonly used in flexographic printing ink formulation applications. | |
| Tohmide TXA-254B | Sanho Chemical Co., Ltd. | Tohmide TXA-254B is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 3500-5500 mPa.s and a softening point of 150-160°C. Tohmide TXA-254B is most commonly used in hot-melt adhesive formulation applica...Vea Mas Tohmide TXA-254B is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 3500-5500 mPa.s and a softening point of 150-160°C. Tohmide TXA-254B is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Tohmide TXA-265 | Sanho Chemical Co., Ltd. | Tohmide TXA-265 is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 140-150°C. Tohmide TXA-265 is most commonly used in hot-melt adhesive formulation applicati...Vea Mas Tohmide TXA-265 is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 140-150°C. Tohmide TXA-265 is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Tohmide TXC-241B | Sanho Chemical Co., Ltd. | Tohmide TXC-241B is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 11,000-20,000 mPa.s and a softening point of 95-105°C. Tohmide TXC-241B is most commonly used in hot-melt adhesive formulation appl...Vea Mas Tohmide TXC-241B is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 11,000-20,000 mPa.s and a softening point of 95-105°C. Tohmide TXC-241B is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Tohmide TXC-241F | Sanho Chemical Co., Ltd. | Tohmide TXC-241F is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 11,000-20,000 mPa.s and a softening point of 105-110°C. Tohmide TXC-241F is most commonly used in hot-melt adhesive formulation app...Vea Mas Tohmide TXC-241F is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 11,000-20,000 mPa.s and a softening point of 105-110°C. Tohmide TXC-241F is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Tohmide TXC-241H | Sanho Chemical Co., Ltd. | Tohmide TXC-241H is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 15,000-25,000 mPa.s and a softening point of 100-110°C. Tohmide TXC-241H is most commonly used in hot-melt adhesive formulation app...Vea Mas Tohmide TXC-241H is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 15,000-25,000 mPa.s and a softening point of 100-110°C. Tohmide TXC-241H is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Tohmide TXC-243A | Sanho Chemical Co., Ltd. | Tohmide TXC-243A is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 100-110°C. Tohmide TXC-243A is most commonly used in hot-melt adhesive formulation appli...Vea Mas Tohmide TXC-243A is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 100-110°C. Tohmide TXC-243A is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Tohmide TXC-244C | Sanho Chemical Co., Ltd. | Tohmide TXC-244C is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 2000-5000 mPa.s and a softening point of 155-165°C. Tohmide TXC-244C is most commonly used in hot-melt adhesive formulation applica...Vea Mas Tohmide TXC-244C is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 2000-5000 mPa.s and a softening point of 155-165°C. Tohmide TXC-244C is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Tohmide TXC-245A | Sanho Chemical Co., Ltd. | Tohmide TXC-245A is a solid-type polyamide resin in a brown-colored pellet form. This product has a viscosity of 1000-2000 mPa.s and a softening point of 85-95°C. Tohmide TXC-245A is most commonly used in heat transfer ink formulation applications. | |
| Tohmide TXC-269 | Sanho Chemical Co., Ltd. | Tohmide TXC-269 is a polyamide resin in a brown-colored pellet form. This product has a viscosity of 3000-4000 mPa.s and a softening point of 170-180°C. Tohmide TXC-269 is most commonly used in hot-melt low-pressure molding adhesive formulation applicatio...Vea Mas Tohmide TXC-269 is a polyamide resin in a brown-colored pellet form. This product has a viscosity of 3000-4000 mPa.s and a softening point of 170-180°C. Tohmide TXC-269 is most commonly used in hot-melt low-pressure molding adhesive formulation applications. Vea Menos | |
| Tohmide TXC-271 | Sanho Chemical Co., Ltd. | Tohmide TXC-271 is a polyamide resin in a brown-colored pellet form. This product has a viscosity of 500-1200 mPa.s and a softening point of 141-153°C. Tohmide TXC-271 is most commonly used in hot-melt low-pressure molding adhesive formulation application...Vea Mas Tohmide TXC-271 is a polyamide resin in a brown-colored pellet form. This product has a viscosity of 500-1200 mPa.s and a softening point of 141-153°C. Tohmide TXC-271 is most commonly used in hot-melt low-pressure molding adhesive formulation applications. Vea Menos | |
| V-Cap™ | Ashland | Es terpolímero de VP, y metacrilamida dimetilaminopropil y , metacriloylaminopropi cloruro de amonio dimethyl láureo methacryloylaminopropy preservado con 0,75% grados óptimos de Liquapar y 0,1% EDTAS disódicos. Las aplicaciones incluyen media receptivo...Vea Mas Es terpolímero de VP, y metacrilamida dimetilaminopropil y , metacriloylaminopropi cloruro de amonio dimethyl láureo methacryloylaminopropy preservado con 0,75% grados óptimos de Liquapar y 0,1% EDTAS disódicos. Las aplicaciones incluyen media receptivos de la inyección de tinta. Vea Menos | |
| V-Pyrol™ | Ashland | Un tensioactivador único que proveer beneficios de rendimiento multifuncional en la actividad superficial, solvencia, afinidad con anionics y la capacidad Encuentra uso como solvente para los polímeros y las sustancias hidrofóbicas, una ayuda de la dis...Vea Mas Un tensioactivador único que proveer beneficios de rendimiento multifuncional en la actividad superficial, solvencia, afinidad con anionics y la capacidad Encuentra uso como solvente para los polímeros y las sustancias hidrofóbicas, una ayuda de la dispersión del pigmento, un solvente de condicionamiento del pigmento, y como componente de decapante foto-resistente. Vea Menos |
