| 1,4-Butanediol (1,4-BDO) | INVISTA | 1,4-Butanediol (1,4-BDO) is a colourless at room temperature viscous liquid or white solid (depending on temperature). 1,4-BDO is used in both the hard and soft segments of Polyurethanes, in the hard segment as a chain extender and in the soft segment as ...Vea Mas 1,4-Butanediol (1,4-BDO) is a colourless at room temperature viscous liquid or white solid (depending on temperature). 1,4-BDO is used in both the hard and soft segments of Polyurethanes, in the hard segment as a chain extender and in the soft segment as polyesterdioles such as polybutylene adipate glycol. 1,4-BDO is used to make a variety of esters, including monomeric plasticizers, the engineering plastic polybutylene terephthalate (PBT) and low molecular weight polyester glycols. The polyester glycols are used as soft segments in polyurethanes and are made by reacting 1,4-BDO with various dibasic acids such as adipic and sebacic acid. Vea Menos | |
| Corfree® M1 | INVISTA | Corfree® M1 is a nitrite-free dibasic acid mixture, primarily C11 and C12, which provides excellent ferrous corrosion inhibition properties. It is used in a variety of corrosion inhibitor applications, including metalworking fluids, engine coolants, metal...Vea Mas Corfree® M1 is a nitrite-free dibasic acid mixture, primarily C11 and C12, which provides excellent ferrous corrosion inhibition properties. It is used in a variety of corrosion inhibitor applications, including metalworking fluids, engine coolants, metal cleaners, aqueous hydraulic fluids, and die cast release agents. When formulated as an amine salt, Corfree® M1 dibasic acid provides superior corrosion protection to alternatives such as sebacic acid, azelaic acid, and long-chain monobasic acids. Corfree® M1 dibasic acid formulations do not leave undesirable, hard-to-clean residues associated with amine borate formulations. Vea Menos | |
| Corfree® M4-10 | INVISTA | Corfree® M4-10 is a diacid mixture, primarily from C9 to C12, which provides good ferrous corrosion inhibition properties. It is used in the Metalworking Fluid as a corrosion inhibitor. When formulated as an amine salt, Corfree® M4-10 diacid provides exce...Vea Mas Corfree® M4-10 is a diacid mixture, primarily from C9 to C12, which provides good ferrous corrosion inhibition properties. It is used in the Metalworking Fluid as a corrosion inhibitor. When formulated as an amine salt, Corfree® M4-10 diacid provides excellent corrosion protection to alternatives such as sebacic acid, azelaic acid, and long-chain monobasic acids. Vea Menos | |
| Cyclododecanol (CDDA) | INVISTA | Cyclododecanol (CDDA) is a high-purity, white solid, cyclic alcohol. It has a molecular formula of C12H24O. This product is commonly used in fragrances, polymers, plasticizers, solvents, and other specialty chemicals. | |
| DBA-F™ Dibasic Acid Flake | INVISTA | DBA-F™ Dibasic Acid Flake is an aliphatic dibasic acid containing primarily glutaric, succinic, and adipic acids. It is specially processed to minimize impurities, particularly nitric acid and metals, and is provided in an easy-to-handle flake form. DBA...Vea Mas DBA-F™ Dibasic Acid Flake is an aliphatic dibasic acid containing primarily glutaric, succinic, and adipic acids. It is specially processed to minimize impurities, particularly nitric acid and metals, and is provided in an easy-to-handle flake form. DBA-F can be used as a pH buffer for lime and limestone SO2 scrubbers (flue gas desulfurization), in polyester polyols for polyurethanes and polyisocyanurates, in scale removers and cleaning applications, in polyester resins, in water treatment chemicals, in tanning agents, and as an added corrosion inhibitor. Vea Menos | |
| Dodecanedioic Acid (DDDA) | INVISTA | Dodecanedioic Acid (DDDA) is a highly pure C12 dibasic acid that is available in white flake form. This product is commonly used in adhesives, corrosion inhibitors, capacitor electrolytes, diester synthetic lubricants, fibers, powder coating curatives, pl...Vea Mas Dodecanedioic Acid (DDDA) is a highly pure C12 dibasic acid that is available in white flake form. This product is commonly used in adhesives, corrosion inhibitors, capacitor electrolytes, diester synthetic lubricants, fibers, powder coating curatives, plasticizers, polyester coatings, epoxy resins, and polyamide resins. Vea Menos | |
| Dytek® A | INVISTA | Dytek® A is an amine composed primarily of 2-Methylpentamethylenediamine (MPMD). Its methyl-branched, 5-carbon chain provides its derivatives with unique properties such as lower viscosity, greater flexibility, and better compatibility. With diacids, it f...Vea Mas Dytek® A is an amine composed primarily of 2-Methylpentamethylenediamine (MPMD). Its methyl-branched, 5-carbon chain provides its derivatives with unique properties such as lower viscosity, greater flexibility, and better compatibility. With diacids, it forms high molecular weight polyamide polymers and copolymers with lower melting points and less crystallinity than polymers made with hexamethylenediamine. Dytek® A can be used in a wide array of applications, including polyamide plastics, films, and fibers, polyamide adhesive and ink resins, epoxy curing agents, water treatment chemicals, polyurethanes, and organic syntheses. Vea Menos | |
| Dytek® BHMT 80 | INVISTA | Dytek® BHMT 80 is a mixed amine containing 80-82 wt% of Bis(hexamethylene)triamine (BHMT) as the primary component. This product can be used in a variety of applications, including asphalt anti-stripping agents, cationic emulsifying agents, cationic colle...Vea Mas Dytek® BHMT 80 is a mixed amine containing 80-82 wt% of Bis(hexamethylene)triamine (BHMT) as the primary component. This product can be used in a variety of applications, including asphalt anti-stripping agents, cationic emulsifying agents, cationic collectors for ore flotation, chelating agent, corrosion and scale inhibitors, curing agents for urethanes, curing agents for epoxy resins, flocculating agents, and wet strength paper resins. Vea Menos | |
| Dytek® BHMT Amine (25% to 49%) | INVISTA | Dytek® BHMT Amine (25% to 49%) is a mixed amine containing 25-49 wt% of Bis(hexamethylene)triamine (BHMT) as the primary component. This product can be used in a variety of applications, including asphalt anti-stripping agents, cationic emulsifying agents...Vea Mas Dytek® BHMT Amine (25% to 49%) is a mixed amine containing 25-49 wt% of Bis(hexamethylene)triamine (BHMT) as the primary component. This product can be used in a variety of applications, including asphalt anti-stripping agents, cationic emulsifying agents, cationic collectors for ore flotation, chelating agent, corrosion and scale inhibitors, curing agents for urethanes, curing agents for epoxy resins, flocculating agents, and wet strength paper resins. Vea Menos | |
| Dytek® BHMT Amine (50% to 78%) | INVISTA | Dytek® BHMT Amine (50% to 78%) is a mixed amine containing 50-78 wt% of Bis(hexamethylene)triamine (BHMT) as the primary component. This product can be used in a variety of applications, including asphalt anti-stripping agents, cationic emulsifying agents...Vea Mas Dytek® BHMT Amine (50% to 78%) is a mixed amine containing 50-78 wt% of Bis(hexamethylene)triamine (BHMT) as the primary component. This product can be used in a variety of applications, including asphalt anti-stripping agents, cationic emulsifying agents, cationic collectors for ore flotation, chelating agent, corrosion and scale inhibitors, curing agents for urethanes, curing agents for epoxy resins, flocculating agents, and wet strength paper resins. Vea Menos | |
| Dytek® DCH-99 | INVISTA | Dytek® DCH-99 is a cyclic aliphatic diamine composed primarily of 1,2-Diaminocyclohexane. It is a mixture of cis- and trans-isomers and a clear liquid at room temperature with an amine-like odor. This product can be used in a variety of applications, incl...Vea Mas Dytek® DCH-99 is a cyclic aliphatic diamine composed primarily of 1,2-Diaminocyclohexane. It is a mixture of cis- and trans-isomers and a clear liquid at room temperature with an amine-like odor. This product can be used in a variety of applications, including urethanes, epoxies, chelating agents, epoxy curing agents, herbicide intermediates, polyamide resins, polyurethanes, polyurea, and scale and corrosion inhibitors. Vea Menos | |
| Dytek® EP | INVISTA | Dytek® EP is a low viscosity, low odor, biodegradable, liquid diamine featuring an odd carbon, ethylbranched, asymmetric structure and differential amine reactivity. This product is ideal for applications such as polyamide monomers, low viscosity urethane...Vea Mas Dytek® EP is a low viscosity, low odor, biodegradable, liquid diamine featuring an odd carbon, ethylbranched, asymmetric structure and differential amine reactivity. This product is ideal for applications such as polyamide monomers, low viscosity urethanes, low viscosity epoxy curatives, divalent amine solvents, surfactants, calcium scale inhibitors, and plastic and petrochemical additives. Vea Menos | |
| Dytek® HMI | INVISTA | Dytek® HMI is clear, colorless liquid with an ammonia-like odor, composed primarily of hexamethyleneimine. This product can be used in a variety of applications, including pharmaceuticals, agricultural chemicals, zeolite manufacture, dyes, inks, rubber ch...Vea Mas Dytek® HMI is clear, colorless liquid with an ammonia-like odor, composed primarily of hexamethyleneimine. This product can be used in a variety of applications, including pharmaceuticals, agricultural chemicals, zeolite manufacture, dyes, inks, rubber chemicals, textile chemicals, corrosion inhibitors, and ore flotation. Vea Menos | |
| Rapi-Cure™ DVE-3 | Ashland | Es un polímero 1-Vinyl-2-Pyrrolidone del grado no-farmacéutico K-85 preservado con el CQ de 50 PPM Cosmocil. Las aplicaciones incluyen los palillos adhesivos estearato-basados para los artes y los artes. | |
| Rapi-Cure™ HBVE | Ashland | Una polividona que se considera estar fisiológico inerte y se Poliuretano ede plastificar con agua y la mayoría de los plastificantes orgánicos comunes. Hay muchas aplicaciones para este producto. | |
| TERATHANE® 1000 PTMEG | INVISTA | TERATHANE® 1000 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety ...Vea Mas TERATHANE® 1000 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety of modern polymers, chiefly polyurethanes. This grade helps improve mechanical properties where the isocyanate is TDI. TERATHANE® PTMEG used in numerous applications, such as industrial wheels, recreational wheels, industrial belts, hose and tubing, films for lamination, tank and pipe liners, apparel coatings, construction coatings, security glazing, spandex fiber, and synthetic polyurethane leather. Vea Menos | |
| TERATHANE® 1400 PTMEG | INVISTA | TERATHANE® 1400 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety ...Vea Mas TERATHANE® 1400 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety of modern polymers, chiefly polyurethanes. This grade gives give properties intermediate between 1000 and 2000. TERATHANE® PTMEG used in numerous applications, such as industrial wheels, recreational wheels, industrial belts, hose and tubing, films for lamination, tank and pipe liners, apparel coatings, construction coatings, security glazing, spandex fiber, and synthetic polyurethane leather. Vea Menos | |
| TERATHANE® 1800 PTMEG | INVISTA | TERATHANE® 1800 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety ...Vea Mas TERATHANE® 1800 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety of modern polymers, chiefly polyurethanes. This grade gives give properties intermediate between 1000 and 2000. TERATHANE® PTMEG used in numerous applications, such as industrial wheels, recreational wheels, industrial belts, hose and tubing, films for lamination, tank and pipe liners, apparel coatings, construction coatings, security glazing, spandex fiber, and synthetic polyurethane leather. Vea Menos | |
| TERATHANE® 2000 PTMEG | INVISTA | TERATHANE® 2000 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety ...Vea Mas TERATHANE® 2000 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety of modern polymers, chiefly polyurethanes. This grade gives the best spectrum of properties in most applications. TERATHANE® PTMEG used in numerous applications, such as industrial wheels, recreational wheels, industrial belts, hose and tubing, films for lamination, tank and pipe liners, apparel coatings, construction coatings, security glazing, spandex fiber, and synthetic polyurethane leather. Vea Menos | |
| TERATHANE® 250 PTMEG | INVISTA | TERATHANE® 250 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety o...Vea Mas TERATHANE® 250 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety of modern polymers, chiefly polyurethanes. This grade was commercialized in 1997. TERATHANE® PTMEG used in numerous applications, such as industrial wheels, recreational wheels, industrial belts, hose and tubing, films for lamination, tank and pipe liners, apparel coatings, construction coatings, security glazing, spandex fiber, and synthetic polyurethane leather. Vea Menos | |
| TERATHANE® 2900 PTMEG | INVISTA | TERATHANE® 2900 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety ...Vea Mas TERATHANE® 2900 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety of modern polymers, chiefly polyurethanes. This grade gives the softest elastomers. TERATHANE® PTMEG used in numerous applications, such as industrial wheels, recreational wheels, industrial belts, hose and tubing, films for lamination, tank and pipe liners, apparel coatings, construction coatings, security glazing, spandex fiber, and synthetic polyurethane leather. Vea Menos | |
| TERATHANE® 650 PTMEG | INVISTA | TERATHANE® 650 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety o...Vea Mas TERATHANE® 650 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety of modern polymers, chiefly polyurethanes. This grade provides the lowest viscosity and greatest hardness. TERATHANE® PTMEG used in numerous applications, such as industrial wheels, recreational wheels, industrial belts, hose and tubing, films for lamination, tank and pipe liners, apparel coatings, construction coatings, security glazing, spandex fiber, and synthetic polyurethane leather. Vea Menos | |
| V-Cap™ | Ashland | Es terpolímero de VP, y metacrilamida dimetilaminopropil y , metacriloylaminopropi cloruro de amonio dimethyl láureo methacryloylaminopropy preservado con 0,75% grados óptimos de Liquapar y 0,1% EDTAS disódicos. Las aplicaciones incluyen media receptivo...Vea Mas Es terpolímero de VP, y metacrilamida dimetilaminopropil y , metacriloylaminopropi cloruro de amonio dimethyl láureo methacryloylaminopropy preservado con 0,75% grados óptimos de Liquapar y 0,1% EDTAS disódicos. Las aplicaciones incluyen media receptivos de la inyección de tinta. Vea Menos | |
| V-Pyrol™ | Ashland | Un tensioactivador único que proveer beneficios de rendimiento multifuncional en la actividad superficial, solvencia, afinidad con anionics y la capacidad Encuentra uso como solvente para los polímeros y las sustancias hidrofóbicas, una ayuda de la dis...Vea Mas Un tensioactivador único que proveer beneficios de rendimiento multifuncional en la actividad superficial, solvencia, afinidad con anionics y la capacidad Encuentra uso como solvente para los polímeros y las sustancias hidrofóbicas, una ayuda de la dispersión del pigmento, un solvente de condicionamiento del pigmento, y como componente de decapante foto-resistente. Vea Menos |
