| DISPEX® AA 4030 | BASF Formulation Additives | DISPEX® AA 4030 is an effective polymeric dispersing agent based on acrylic acid ammonium salt. | |
| Dispex® AA 4040 | BASF Formulation Additives | Dispex® AA 4040 (anteriormente Dispex® A40) es un derivado de una familia de agentes dispersantes altamente eficaces, de baja viscosidad para sistemas de revestimientos a base de agua. El producto es especialmente adecuado para la dispersión de pigmentos ...Vea Mas Dispex® AA 4040 (anteriormente Dispex® A40) es un derivado de una familia de agentes dispersantes altamente eficaces, de baja viscosidad para sistemas de revestimientos a base de agua. El producto es especialmente adecuado para la dispersión de pigmentos inorgánicos. Dispex AA® 4040 es una solución de una sal de amonio de un polímero acrílico en agua. Los neutralizantes alcalinos utilizados junto con el polímero acrílico pueden afectar significativamente las propiedades del revestimiento final. Dispex® A40 libera amoníaco durante el proceso de secado y por lo tanto tiene poco impacto sobre la resistencia alcalina y al agua de la película seca. El uso de Dispex® A40 debe limitarse a un pH de 5 a 10,5 y temperaturas inferiores a 70 °C debido a la pérdida potencial de amoníaco volátil. Vea Menos | |
| DISPEX® AA 4135 NA | BASF Formulation Additives | DISPEX® AA 4135 is an effective polymeric dispersing agent based on acrylic acid sodium salt. | |
| DISPEX® AA 4140 | BASF Formulation Additives | DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of ...Vea Mas DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of an acrylic polymer in water. This straw colored liquid is effective over a pH range 5-12 and up to temperatures in excess of 100°C. Compared with inorganic dispersing agents, e.g. polyphosphate products, the organic polymer based DISPEX® N40 provides improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures or pH changes. Vea Menos | |
| Dispex® AA S 760 | BASF Formulation Additives | Dispex® AA S 760 (anteriormente Hydropalat® 1706) es un derivado de la familia de los agentes de dispersión altamente efectivos para sistemas de revestimiento a base de agua, especialmente apto para la dispersión de pigmentos inorgánicos. | |
| Dispex® AA S040 | BASF Formulation Additives | Dispex® AA S040 (anteriormente Hydropalat® 5040) es un agente de humectación y dispersión que se usa para optimizar el proceso de dispersión de pigmentos y rellenos. | |
| Dispex® CX 4231 | BASF Formulation Additives | Dispex® CX 4231 (anteriormente Ultradispers® AB 30) es una sal de amonio polimérica eficaz de un copolímero de ácido carboxílico. Tiene un carácter hidrofóbico pronunciado y reduce los rastros de caracol y la absorción de agua. | |
| DISPEX® CX 4320 | BASF Formulation Additives | DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersi...Vea Mas DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersing inorganic fillers and pigments in high gloss, semi-gloss and highly filled interior paints. It also improves wet-scrub resistance, blocking resistance and has excellent ZnO-compatibility. Vea Menos | |
| Dispex® CX 4345 | BASF Formulation Additives | Dispex® CX 4345 (anteriormente Ultradispers® MD 21) es una sal de amonio polimérica eficaz de un copolímero de ácido carboxílico en agua. Su naturaleza hidrofóbica da lugar en una mejora sobresaliente de la resistencia a la frotación en húmedo. | |
| DISPEX® CX 4910 | BASF Formulation Additives | DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. ...Vea Mas DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. DISPEX® CX 4910 is a sodium salt of an acrylic polymer. For the production of systems, traded as ‘dry systems’, DISPEX® CX 4910 is typically incorporated into the dry powder mix by a normal dry blending operation. Upon wetting of such a ‘dry system’ a waterbased paste/slurry is generated. DISPEX® CX 4910 is effective over a pH range 5-12 and up to temperatures in excess of 100°C. Vea Menos | |
| Dispex® Ultra FA 4401 | BASF Formulation Additives | Dispex® Ultra FA 4401 (anteriormente Pluracoat® Dispersal DA 120) es un surfactante no iónico con excelentes propiedades de humectación y dispersión de pigmentos. Es compatible con otros surfactantes no iónicos, aniónicos y catiónicos. | |
| DISPEX® Ultra FA 4416 | BASF Formulation Additives | DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-...Vea Mas DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-emulsions. With its excellent wetting properties, DISPEX® Ultra FA 4416 when used with inorganic and organic pigments produces a high gloss and good color development in low and co-solvent free systems. DISPEX® Ultra FA 4416 prevents rub-out effects by using critical pigment combinations, e.g. titanium dioxide / phthalo blue. It is suitable for air and oven drying coatings as well as baking coatings. Since DISPEX® Ultra FA 4416 has no effect on pot-life it is also recommended for aqueous 2 pack PUR coatings. It allows the formulation of economical inorganic slurries and pigment concentrates for emulsion paints and consumer coatings. Here it combines the advantages of a low paste-viscosity with anti-settling characteristics and excellent compatibility to all types of aqueous base-paints. Vea Menos | |
| DISPEX® Ultra FA 4425 | BASF Formulation Additives | DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints ...Vea Mas DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints into which they may be incorporated. This results in: maximum color development of the colorant based on DISPEX® Ultra FA 4425, optimum color acceptance of universal colorants in base-paints, and higher pigment loading in colorants. DISPEX® Ultra FA 4425, used as a single wetting and dispersing agent, is considered suitable for VOC-free applications, particularly universal colorants. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4425 to the base paints (water and solvent) can increase compatibility and color acceptance, especially in water-based and ultra-low aromatic content decorative paints. Vea Menos | |
| DISPEX® Ultra FA 4431 | BASF Formulation Additives | DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especia...Vea Mas DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especially suitable for wetting, dispersion and stabilization of inorganic pigments and fillers in solvent-free epoxy and polyurethane systems, like flooring or pipe-line coatings. DISPEX® Ultra FA 4431 can also be used to decrease the viscosity of water-based resin-free inorganic pigment concentrates, based on high molecular weight dispersing agents like DISPEX® Ultra PA 4550. In addition DISPEX® Ultra FA 4431 is suitable for dispersion and stabilization of inorganic pigments and fillers in water-based decorative paints based on acrylic emulsions, achieving a better rheology and improved gloss. Vea Menos | |
| DISPEX® Ultra FA 4480 | BASF Formulation Additives | DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra...Vea Mas DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra FA 4480 also provides outstanding flow properties even at high pigment load. In topcoats based on different binder types DISPEX® Ultra FA 4480 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. This product also shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions. Vea Menos | |
| Dispex® Ultra FA 4483 | BASF Formulation Additives | Un agente de dispersión para pigmentos inorgánicos y surfactante estabilizador para la producción del látex. | |
| Dispex® Ultra PA 4500 | BASF Formulation Additives | Una resina de dispersión para la producción de pigmento, tanto de base acuosa como transmitido por solventes para resinas de concentrado mínimaes de pigmento. Proporciona buena humectación de pigmento y buen rendimiento de estabilización, y tiene compati...Vea Mas Una resina de dispersión para la producción de pigmento, tanto de base acuosa como transmitido por solventes para resinas de concentrado mínimaes de pigmento. Proporciona buena humectación de pigmento y buen rendimiento de estabilización, y tiene compatibilidad con resinas usadas en revestimientos transmitidos por el agua y por solventes. Vea Menos | |
| DISPEX® Ultra PA 4560 | BASF Formulation Additives | DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior...Vea Mas DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior. DISPEX® Ultra PA 4560 is, in combination with DISPEX® Ultra PA 4503, suitable to formulate VOC-free tinting concentrates for both water- and solvent-based decorative paints. These concentrates have excellent compatibility and can therefore be incorporated by the use of low shear forces (shaking machines). Vea Menos | |
| Dispex® Ultra PA 4570 | BASF Formulation Additives | Estabiliza la dispersión de pigmento en los pigmentos, inorgánicos, orgánicos, y los de carbón negro, y mejora las siguientes propiedades: brillo, fuerza de color, estabilidad de floculación, comportamiento de anti-inundación, y desarrollo de color en sis...Vea Mas Estabiliza la dispersión de pigmento en los pigmentos, inorgánicos, orgánicos, y los de carbón negro, y mejora las siguientes propiedades: brillo, fuerza de color, estabilidad de floculación, comportamiento de anti-inundación, y desarrollo de color en sistemas a base de agua y a base de solventes. Vea Menos | |
| Dispex® Ultra PA 4580 | BASF Formulation Additives | Estabiliza la dispersión de pigmento, de pigmentos inorgánicos y orgánicos, y mejora las propiedades siguientes: fuerte reducción de viscosidad de pasta de pigmento, cargado de pigmento, brillo, fuerza de color, estabilidad de floculación, y comportamien...Vea Mas Estabiliza la dispersión de pigmento, de pigmentos inorgánicos y orgánicos, y mejora las propiedades siguientes: fuerte reducción de viscosidad de pasta de pigmento, cargado de pigmento, brillo, fuerza de color, estabilidad de floculación, y comportamiento de anti-inundación. Vea Menos | |
| Dispex® Ultra PA 4590 | BASF Formulation Additives | Dispersor polimérico de peso molecular alto para revestimientos a base de agua. Diseñado como alternativa rentable a los dispersores poliméricos existentes; adecuado para toda la clase de pigmentos en revestimientos industriales a base de agua, así como ...Vea Mas Dispersor polimérico de peso molecular alto para revestimientos a base de agua. Diseñado como alternativa rentable a los dispersores poliméricos existentes; adecuado para toda la clase de pigmentos en revestimientos industriales a base de agua, así como para concentrados de pigmento. Vea Menos | |
| DISPEX® Ultra PX 4275 | BASF Formulation Additives | DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 p...Vea Mas DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 pack PUR coating. This product has a low foaming tendency and to the best of our knowledge has no negative influence on the water and corrosion resistance. DISPEX® Ultra PX 4275 is used in combination with zinc oxid, an increase of viscosity may occur. Vea Menos | |
| DISPEX® Ultra PX 4575 | BASF Formulation Additives | DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra ...Vea Mas DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. Vea Menos | |
| DISPEX® Ultra PX 4585 | BASF Formulation Additives | DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low...Vea Mas DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4585 is especially suited for the dispersion of pigments in water-based coatings. DISPEX® Ultra PX 4585 offers high efficiency in stabilizing pigments and demonstrates wide compatibility with many water-based resin systems. This makes DISPEX® Ultra PX 4585 ideally suited for the use of the concept of resin-free pigment concentrates (RFPC). Vea Menos | |
| Efka® FA 4610 | BASF Formulation Additives | Efka® FA 4610 (anteriormente Efka® 5010) es aditivo humectante y dispersante aniónico para pigmentos inorgánicos. Ayuda a humectar y dispersar pigmentos inorgánicos y diluyentes, y es particularmente adecuado para revestimientos automotrices, industriales...Vea Mas Efka® FA 4610 (anteriormente Efka® 5010) es aditivo humectante y dispersante aniónico para pigmentos inorgánicos. Ayuda a humectar y dispersar pigmentos inorgánicos y diluyentes, y es particularmente adecuado para revestimientos automotrices, industriales generales, de bobinas y de curado ácido. Efka® FA 4610 podría tener un efecto catalizador en la reacción en esmaltes de secado al horno. Esto puede dar lugar al aumento de la viscosidad durante el almacenamiento. Vea Menos | |
| Efka® FA 4612 | BASF Formulation Additives | Efka® FA 4612 (anteriormente Efka® 5210) ayuda a humectar y dispersar diluyentes (CaCO3 y AI (OH) 3) con resinas de poliéster insaturado o combinaciones con copolímeros de poliestireno, polivinilacetato y estireno-butadieno. Esto se traduce en la incorpor...Vea Mas Efka® FA 4612 (anteriormente Efka® 5210) ayuda a humectar y dispersar diluyentes (CaCO3 y AI (OH) 3) con resinas de poliéster insaturado o combinaciones con copolímeros de poliestireno, polivinilacetato y estireno-butadieno. Esto se traduce en la incorporación más fácil de los diluyentes que conducen a tiempos de dispersión reducido. También proporciona una viscosidad más baja y estable de las pastas y, por tanto, un mejor flujo, mayor carga de materiales de relleno y una mejor resistencia a las llamas. Efka® FA 4612 está diseñado para compuestos SMC y BMC rellenos. También es adecuado para los las capas de gelidificación rellenas. Vea Menos | |
| EFKA® FA 4620 | BASF Formulation Additives | EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler an...Vea Mas EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler and extender loading. EFKA® FA 4620 is suited for filled unsaturated polyester systems (e.g. SMC/BMC, gel coats, car putties) or combinations with polystyrene, polyvinylacetate and styrene-butadiene copolymers (e.g. LS- or LP formulations). Vea Menos | |
| EFKA® FA 4642 | BASF Formulation Additives | EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not aff...Vea Mas EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. In the dispersion of organically treated Bentonites, the use of EFKA® FA 4642 shortens dispersion time, provides easier handling of the Bentonite gel, and improves storage stability. Vea Menos | |
| EFKA® FA 4644 | BASF Formulation Additives | EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigm...Vea Mas EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigment sedimentation, and increased gloss and improved flow. EFKA® FA 4644 is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. Vea Menos | |
| Efka® FA 4654 EM | BASF Formulation Additives | Una aditivo de dispersión anti-asentamiento, anti-inundación y anti-flotación, para medios y revestimientos no polares, ayuda de gelificación para bentonitas orgánico-modificadas. | |
| EFKA® FA 4663 | BASF Formulation Additives | EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of a...Vea Mas EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of an electroneutral salt of a polycarboxylic acid with amine derivatives dissolved in higher aromatics. EFKA® FA 4663 is an almost universally applicable additive for nonaqueous coatings. It has proved its value in particular in systems based on alkyd resins, alkyd/melamine resins, acrylic and epoxy resins,chlorinated rubber, linseed oil/stand oil, etc. If some linear binders which contain hydroxyl groups (e.g. Desmophen® types from Bayer)are used with our product, thixotropy can occur. Vea Menos | |
| EFKA® FA 4665 | BASF Formulation Additives | EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, s...Vea Mas EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, slightly brownish liquid is especially suitable for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane- and chlorinated polymer systems, acrylic polyisocyanate systems (2-pack acrylics), and chlorinated polymers. EFKA® FA 4665 is not compatible with white spirit or paints which are diluted with white spirit. Vea Menos | |
| EFKA® PA 4400 | BASF Formulation Additives | EFKA® PA 4400 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all...Vea Mas EFKA® PA 4400 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all kinds of solvent borne coatings. EFKA® PA 4400 is an acrylic polymer with significant higher molecular weight compared with the EFKA® polyurethane-based polymeric dispersants. This gives better deflocculation of organic pigments. Vea Menos | |
| EFKA® PA 4401 | BASF Formulation Additives | EFKA® PA 4401 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems and higher color strength. This product is broadly compatible – from lo...Vea Mas EFKA® PA 4401 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems and higher color strength. This product is broadly compatible – from low- to high-polarity systems, including nitrocellulose. Care should be taken with EFKA® PA 4401 because of its tendency to yellowing and gelling when combined with chlorinated polymers. It also has a tendency to yellowing when combined with solvent-free epoxies. EFKA® PA 4401 is used for all kinds of high-quality solvent-based industrial coatings including automotive topcoats as well as pigment concentrates. Vea Menos | |
| Efka® PA 4402 | BASF Formulation Additives | Es un dispersor polimérico utilizado para estabilizar pigmentos inorgánicos y orgánicos, da como resultado un brillo mejorado, reducción de problemas de inundación y fuerza de color más alta. | |
| EFKA® PA 4450 | BASF Formulation Additives | EFKA® PA 4450 is a polymeric dispersant for inorganic and organic pigments in non-aqueous, polar and non-polar coatings. This clear liquid avoids flocculation of pigments, increases color strength and also reduces grinding time. It is a carboxyl functiona...Vea Mas EFKA® PA 4450 is a polymeric dispersant for inorganic and organic pigments in non-aqueous, polar and non-polar coatings. This clear liquid avoids flocculation of pigments, increases color strength and also reduces grinding time. It is a carboxyl functional polymer that can be used in all systems independent from its polarity, e. g. alkyds, PE, acrylics. 2 - component polyurethane paints, 2 - component epoxy paints, unsaturated polyester. The application in systems with low polarity is possible as well. EFKA® PA 4450 is used in combination with all commonly used solvents. It shows good solubility even with isoparaffins, which makes it very useful for these systems. It also shows excellent performance when used as a dispersant in pigment pastes. Vea Menos | |
| EFKA® PU 4010 | BASF Formulation Additives | EFKA® PU 4010 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in: reduced grinding time, impr...Vea Mas EFKA® PU 4010 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in: reduced grinding time, improved gloss, prevention of flooding and floating problems and higher color strength. Due to its particularly good combination of price and performance, EFKA® PU 4010 is a very attractive substitute for conventional wetting and dispersing agents. It is possible to mix combinations of inorganic pigments stabilized with EFKA® PU 4010 and organic pigments stabilized with other EFKA® highmolecular-weight polymeric dispersants. Vea Menos | |
| EFKA® PU 4015 | BASF Formulation Additives | EFKA® PU 4015 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic and organic pigments with strong viscosity depressing properties. This results in: improved gloss, reduced flooding problems, higher color st...Vea Mas EFKA® PU 4015 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic and organic pigments with strong viscosity depressing properties. This results in: improved gloss, reduced flooding problems, higher color strength, lower viscosity and higher pigment loads. Due to its particularly good combination of price and performance, EFKA® PU 4015 is a very attractive substitute for conventional wetting and dispersing agents. Vea Menos | |
| EFKA® PU 4020 | BASF Formulation Additives | EFKA® PU 4020 is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in reduced grinding time, improved gloss, prevention of flooding and floating p...Vea Mas EFKA® PU 4020 is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in reduced grinding time, improved gloss, prevention of flooding and floating problems, and higher color strength. Due to its particularly good combination of price and performance, EFKA® PU 4020 is a very attractive substitute for conventional wetting and dispersing agents. It is possible to mix combinations of inorganic pigments stabilized with EFKA® PU 4020 and organic pigments stabilized with other EFKA® highmolecular-weight polymeric dispersants. Vea Menos | |
| EFKA® PU 4046 | BASF Formulation Additives | EFKA® PU 4046 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for all kinds of solvent borne coatings as well as pigment concentrates. EFKA® PU 4046 is ...Vea Mas EFKA® PU 4046 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for all kinds of solvent borne coatings as well as pigment concentrates. EFKA® PU 4046 is used for all kinds of solvent-based coatings as well as pigment concentrates. Vea Menos | |
| EFKA® PU 4047 | BASF Formulation Additives | EFKA® PU 4047 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for all kinds of solvent borne coatings as well as pigment concentrates. The higher molecu...Vea Mas EFKA® PU 4047 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for all kinds of solvent borne coatings as well as pigment concentrates. The higher molecular weight of EFKA® PU 4047 compared to EFKA® PU 4046 gives stronger deflocculation results with some organic pigments and carbon blacks. In spite of its higher molecular weight, EFKA® PU 4047 has a wide compatibility with all kinds of resins. Pigment concentrates based on EFKA® PU 4047 show lower viscosity than concentrates made with any other EFKA® polymeric dispersants and can even be used in pure let downs based on white spirit. Vea Menos | |
| EFKA® PU 4050 | BASF Formulation Additives | EFKA® PU 4050 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all...Vea Mas EFKA® PU 4050 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all kinds of solvent borne coatings. Vea Menos | |
| EFKA® PU 4061 | BASF Formulation Additives | EFKA® PU 4061 a polymeric dispersant for stabilizing inorganic and organic pigments. This results in improved gloss and DOI, reduced flooding problems, higher color strength and lower viscosity. EFKA® PU 4061 is used in all types of solvent-based coatings...Vea Mas EFKA® PU 4061 a polymeric dispersant for stabilizing inorganic and organic pigments. This results in improved gloss and DOI, reduced flooding problems, higher color strength and lower viscosity. EFKA® PU 4061 is used in all types of solvent-based coatings, particularly high-quality industrial coatings such as automotive topcoats (OEM and refinish), coil coatings and 2-pack polyurethane coating systems. It is also suitable for use in pigment concentrates. Vea Menos | |
| EFKA® PU 4063 | BASF Formulation Additives | EFKA® PU 4063 is a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. This yellowish liquid is a modified polyurethane. EFKA® PU 4063 reduces the dispersing time an...Vea Mas EFKA® PU 4063 is a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. This yellowish liquid is a modified polyurethane. EFKA® PU 4063 reduces the dispersing time and the mill base viscosity and thus facilitates the formulation of highly concentrated pigment pastes. After the pigment paste has been blended into paint, EFKA® PU 4063 prevents flooding and floating of pigments and promotes excellent gloss and high color intensity. This product is readily compatible with a wide range of binder types. Pigment pastes based on EFKA® PU 4063 can therefore be used in 2-component polyurethane paints, 2 - component epoxy paints, unsaturated polyester, stoving paints and air drying paints. Vea Menos | |
| EFKA® PU 4080 | BASF Formulation Additives | EFKA® PU 4080 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for automotive OEM and refinish topcoats, coil coatings and other high quality industrial ...Vea Mas EFKA® PU 4080 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for automotive OEM and refinish topcoats, coil coatings and other high quality industrial solvent born coatings. It is also suitable for use in pigment concentrates. Vea Menos | |
| EFKA® PX 4300 | BASF Formulation Additives | EFKA® PX 4300 is a high-molecular-weight dispersing agent. It is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX...Vea Mas EFKA® PX 4300 is a high-molecular-weight dispersing agent. It is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX 4300 is suitable for stabilizing pigments in solvent-based coatings. This results in: high color strength, good stability against flooding, floating and flocculation, and strong viscosity-depressing effects. Vea Menos | |
| EFKA® PX 4310 | BASF Formulation Additives | EFKA® PX 4310 is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. This product is suitable for industrial and automotive c...Vea Mas EFKA® PX 4310 is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. This product is suitable for industrial and automotive coatings. It offers high efficiency in stabilizing pigments and demonstrates a wide compatibility with many solvent-based resin systems. Vea Menos | |
| EFKA® PX 4320 | BASF Formulation Additives | EFKA® PX 4320 is a high-molecular-weight dispersing agent. It is is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA®...Vea Mas EFKA® PX 4320 is a high-molecular-weight dispersing agent. It is is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX 4320 is suitable for solvent-based industrial and automotive coatings. It also offers high efficiency in stabilizing pigments and demonstrates a wide compatibility with many resin systems. This makes EFKA® PX 4320 ideally suited for use of the concept of Resin-Free Pigment Concentrates (RFPC). Vea Menos | |
| EFKA® PX 4330 | BASF Formulation Additives | EFKA® PX 4330 is a high-molecular-weight dispersing agent. It is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX...Vea Mas EFKA® PX 4330 is a high-molecular-weight dispersing agent. It is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX 4330 is suitable for stabilizing pigments in solvent-based coatings. This product, due to the very wide compatibility in most current systems used in solvent-based coatings, is especially suitable for the production of Resin Minimal Pigment Concentrates (RMPC) in combination with a multi compatible dispersing resin. Vea Menos | |
| EFKA® PX 4340 | BASF Formulation Additives | EFKA® PX 4340 is a high molecular weight dispersing agent for deflocculation of organic pigments in solvent based systems. It is specially designed for use in solvent-based high-end performance coatings systems, such as automotive OEM and refinish. It als...Vea Mas EFKA® PX 4340 is a high molecular weight dispersing agent for deflocculation of organic pigments in solvent based systems. It is specially designed for use in solvent-based high-end performance coatings systems, such as automotive OEM and refinish. It also is highly suitable for CAB base-coats and all topcoats. EFKA® PX 4340, due to the very wide compatibility in most current systems used in solvent-based coatings, is especially suitable for the production of Resin Minimal Pigment Concentrates (RMPC) in combination with a multi compatible dispersing resin. Vea Menos | |
| Efka® PX 4731 | BASF Formulation Additives | Efka® PX 4731 (anteriormente Efka® 7731) es un dispersante desarrollado específicamente para tintas de inyección a fin de proporcionar la combinación esencial de fuerte supresión de la viscosidad y una excelente estabilidad de almacenamiento. Se basa en u...Vea Mas Efka® PX 4731 (anteriormente Efka® 7731) es un dispersante desarrollado específicamente para tintas de inyección a fin de proporcionar la combinación esencial de fuerte supresión de la viscosidad y una excelente estabilidad de almacenamiento. Se basa en un proceso patentado. Es particularmente eficaz en los sistemas de curado mediante luz UV y en los sistemas a base de solventes leves, por ejemplo, en los éteres de glicol. Efka® PX 4731 es un producto líquido sin solventes que es 100% activo. Como tal, es potencialmente adecuado para el uso en cualquier sistema de tinta curable por luz UV incluidas tintas flexográficas y serigráficas. También es adecuado para concentrados de pigmento sin resina (RFPC) curables mediante luz UV e incluso a base de solventes para una amplia gama de aplicaciones. El producto es ligeramente menos polar en naturaleza que Efka® PX 4732. Vea Menos | |
| Hydropalat® 44 | BASF Formulation Additives | Hydropalat® 44 es un dispersante para pigmentos de dióxido de titanio y de extensión. Es un polielectrolito aniónico. Hydropalat® 44 es, incluso a dosis bajas, un adyuvante de dispersión muy eficaz. Como un único dispersante no requiere ningún dispersante...Vea Mas Hydropalat® 44 es un dispersante para pigmentos de dióxido de titanio y de extensión. Es un polielectrolito aniónico. Hydropalat® 44 es, incluso a dosis bajas, un adyuvante de dispersión muy eficaz. Como un único dispersante no requiere ningún dispersante auxiliar o agente humectante o polifosfatos. Este producto demuestra excelente retención del brillo inicial y retención de brillo superior después de su exposición al calor de nuevo. Muestra compatibilidad excepcional con pigmentos reactivos tales como óxido de zinc y con solventes como el etileno y propilenglicol. Esto permite el uso en moliendas de glicol o en lechadas en base a pigmentos. Vea Menos | |
| Hydropalat® WE 3116 | BASF Formulation Additives | Hydropalat® WE 3116 (anteriormente Hydropalat® 215) es un dispersante para revestimientos acuosos. Es especialmente apto para las pastas de pigmentos libres de disolventes y aglutinantes. | |
| Hydropalat® WE 3127 | BASF Formulation Additives | Hydropalat® WE 3127 (anteriormente Hydropalat® PLS 127) es un surfactante biodegradable para la humectación y dispersión de pigmentos en pinturas acuosas, tintas y adhesivos. | |
| Hydropalat® WE 3158 | BASF Formulation Additives | Hydropalat® WE 3158 (anteriormente Hydropalat® 1580) es una solución acuosa de una mezcla de surfactantes no iónicos. | |
| Hydropalat® WE 3182 | BASF Formulation Additives | Hydropalat® WE 3182 (anteriormente Emulan® EL) es un emulsionante y agente de dispersión no iónico. | |
| Hydropalat® WE 3188 | BASF Formulation Additives | Hydropalat® WE 3188 (anteriormente Hydropalat® 188 A) es un agente de dispersión no iónico, versátil, altamente concentrado para usar en sistemas acuosos y orgánicos. | |
| Hydropalat® WE 3633 | BASF Formulation Additives | Hydropalat® WE 3633 (anteriormente Hydropalat® AB 30) es una preparación acuosa a base de betaína y un agente de dispersión para los sistemas acuosos. |
