| Dispex® AA S040 | BASF Formulation Additives | Dispex® AA S040 (anteriormente Hydropalat® 5040) es un agente de humectación y dispersión que se usa para optimizar el proceso de dispersión de pigmentos y rellenos. | |
| Dispex® Ultra FA 4401 | BASF Formulation Additives | Dispex® Ultra FA 4401 (anteriormente Pluracoat® Dispersal DA 120) es un surfactante no iónico con excelentes propiedades de humectación y dispersión de pigmentos. Es compatible con otros surfactantes no iónicos, aniónicos y catiónicos. | |
| DISPEX® Ultra FA 4416 | BASF Formulation Additives | DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-...Vea Mas DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-emulsions. With its excellent wetting properties, DISPEX® Ultra FA 4416 when used with inorganic and organic pigments produces a high gloss and good color development in low and co-solvent free systems. DISPEX® Ultra FA 4416 prevents rub-out effects by using critical pigment combinations, e.g. titanium dioxide / phthalo blue. It is suitable for air and oven drying coatings as well as baking coatings. Since DISPEX® Ultra FA 4416 has no effect on pot-life it is also recommended for aqueous 2 pack PUR coatings. It allows the formulation of economical inorganic slurries and pigment concentrates for emulsion paints and consumer coatings. Here it combines the advantages of a low paste-viscosity with anti-settling characteristics and excellent compatibility to all types of aqueous base-paints. Vea Menos | |
| DISPEX® Ultra FA 4425 | BASF Formulation Additives | DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints ...Vea Mas DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints into which they may be incorporated. This results in: maximum color development of the colorant based on DISPEX® Ultra FA 4425, optimum color acceptance of universal colorants in base-paints, and higher pigment loading in colorants. DISPEX® Ultra FA 4425, used as a single wetting and dispersing agent, is considered suitable for VOC-free applications, particularly universal colorants. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4425 to the base paints (water and solvent) can increase compatibility and color acceptance, especially in water-based and ultra-low aromatic content decorative paints. Vea Menos | |
| DISPEX® Ultra FA 4431 | BASF Formulation Additives | DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especia...Vea Mas DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especially suitable for wetting, dispersion and stabilization of inorganic pigments and fillers in solvent-free epoxy and polyurethane systems, like flooring or pipe-line coatings. DISPEX® Ultra FA 4431 can also be used to decrease the viscosity of water-based resin-free inorganic pigment concentrates, based on high molecular weight dispersing agents like DISPEX® Ultra PA 4550. In addition DISPEX® Ultra FA 4431 is suitable for dispersion and stabilization of inorganic pigments and fillers in water-based decorative paints based on acrylic emulsions, achieving a better rheology and improved gloss. Vea Menos | |
| DISPEX® Ultra FA 4480 | BASF Formulation Additives | DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra...Vea Mas DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra FA 4480 also provides outstanding flow properties even at high pigment load. In topcoats based on different binder types DISPEX® Ultra FA 4480 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. This product also shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions. Vea Menos | |
| Dispex® Ultra FA 4483 | BASF Formulation Additives | Un agente de dispersión para pigmentos inorgánicos y surfactante estabilizador para la producción del látex. | |
| Dispex® Ultra PA 4500 | BASF Formulation Additives | Una resina de dispersión para la producción de pigmento, tanto de base acuosa como transmitido por solventes para resinas de concentrado mínimaes de pigmento. Proporciona buena humectación de pigmento y buen rendimiento de estabilización, y tiene compati...Vea Mas Una resina de dispersión para la producción de pigmento, tanto de base acuosa como transmitido por solventes para resinas de concentrado mínimaes de pigmento. Proporciona buena humectación de pigmento y buen rendimiento de estabilización, y tiene compatibilidad con resinas usadas en revestimientos transmitidos por el agua y por solventes. Vea Menos | |
| Dispex® Ultra PA 4590 | BASF Formulation Additives | Dispersor polimérico de peso molecular alto para revestimientos a base de agua. Diseñado como alternativa rentable a los dispersores poliméricos existentes; adecuado para toda la clase de pigmentos en revestimientos industriales a base de agua, así como ...Vea Mas Dispersor polimérico de peso molecular alto para revestimientos a base de agua. Diseñado como alternativa rentable a los dispersores poliméricos existentes; adecuado para toda la clase de pigmentos en revestimientos industriales a base de agua, así como para concentrados de pigmento. Vea Menos | |
| DISPEX® Ultra PX 4275 | BASF Formulation Additives | DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 p...Vea Mas DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 pack PUR coating. This product has a low foaming tendency and to the best of our knowledge has no negative influence on the water and corrosion resistance. DISPEX® Ultra PX 4275 is used in combination with zinc oxid, an increase of viscosity may occur. Vea Menos | |
| Efka® FA 4610 | BASF Formulation Additives | Efka® FA 4610 (anteriormente Efka® 5010) es aditivo humectante y dispersante aniónico para pigmentos inorgánicos. Ayuda a humectar y dispersar pigmentos inorgánicos y diluyentes, y es particularmente adecuado para revestimientos automotrices, industriales...Vea Mas Efka® FA 4610 (anteriormente Efka® 5010) es aditivo humectante y dispersante aniónico para pigmentos inorgánicos. Ayuda a humectar y dispersar pigmentos inorgánicos y diluyentes, y es particularmente adecuado para revestimientos automotrices, industriales generales, de bobinas y de curado ácido. Efka® FA 4610 podría tener un efecto catalizador en la reacción en esmaltes de secado al horno. Esto puede dar lugar al aumento de la viscosidad durante el almacenamiento. Vea Menos | |
| Efka® FA 4612 | BASF Formulation Additives | Efka® FA 4612 (anteriormente Efka® 5210) ayuda a humectar y dispersar diluyentes (CaCO3 y AI (OH) 3) con resinas de poliéster insaturado o combinaciones con copolímeros de poliestireno, polivinilacetato y estireno-butadieno. Esto se traduce en la incorpor...Vea Mas Efka® FA 4612 (anteriormente Efka® 5210) ayuda a humectar y dispersar diluyentes (CaCO3 y AI (OH) 3) con resinas de poliéster insaturado o combinaciones con copolímeros de poliestireno, polivinilacetato y estireno-butadieno. Esto se traduce en la incorporación más fácil de los diluyentes que conducen a tiempos de dispersión reducido. También proporciona una viscosidad más baja y estable de las pastas y, por tanto, un mejor flujo, mayor carga de materiales de relleno y una mejor resistencia a las llamas. Efka® FA 4612 está diseñado para compuestos SMC y BMC rellenos. También es adecuado para los las capas de gelidificación rellenas. Vea Menos | |
| EFKA® FA 4620 | BASF Formulation Additives | EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler an...Vea Mas EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler and extender loading. EFKA® FA 4620 is suited for filled unsaturated polyester systems (e.g. SMC/BMC, gel coats, car putties) or combinations with polystyrene, polyvinylacetate and styrene-butadiene copolymers (e.g. LS- or LP formulations). Vea Menos | |
| EFKA® FA 4642 | BASF Formulation Additives | EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not aff...Vea Mas EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. In the dispersion of organically treated Bentonites, the use of EFKA® FA 4642 shortens dispersion time, provides easier handling of the Bentonite gel, and improves storage stability. Vea Menos | |
| EFKA® FA 4644 | BASF Formulation Additives | EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigm...Vea Mas EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigment sedimentation, and increased gloss and improved flow. EFKA® FA 4644 is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. Vea Menos | |
| EFKA® FA 4665 | BASF Formulation Additives | EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, s...Vea Mas EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, slightly brownish liquid is especially suitable for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane- and chlorinated polymer systems, acrylic polyisocyanate systems (2-pack acrylics), and chlorinated polymers. EFKA® FA 4665 is not compatible with white spirit or paints which are diluted with white spirit. Vea Menos | |
| EFKA® FL 3778 | BASF Formulation Additives | EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and ai...Vea Mas EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and air-drying alkyd systems. Vea Menos | |
| EFKA® PU 4063 | BASF Formulation Additives | EFKA® PU 4063 is a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. This yellowish liquid is a modified polyurethane. EFKA® PU 4063 reduces the dispersing time an...Vea Mas EFKA® PU 4063 is a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. This yellowish liquid is a modified polyurethane. EFKA® PU 4063 reduces the dispersing time and the mill base viscosity and thus facilitates the formulation of highly concentrated pigment pastes. After the pigment paste has been blended into paint, EFKA® PU 4063 prevents flooding and floating of pigments and promotes excellent gloss and high color intensity. This product is readily compatible with a wide range of binder types. Pigment pastes based on EFKA® PU 4063 can therefore be used in 2-component polyurethane paints, 2 - component epoxy paints, unsaturated polyester, stoving paints and air drying paints. Vea Menos | |
| EFKA® SL 3033 | BASF Formulation Additives | EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and crater...Vea Mas EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and cratering. It is an organically modified polysiloxane. Vea Menos | |
| Efka® SL 3883 | BASF Formulation Additives | Un polímero polisiloxano-modificado con grupos terminales no saturados. Utilizado en los acabadosde madera y tintas de impresión. Mejora la nivelación, el deslizamiento y el alisamiento de superficie. Aumenta el efecto anti-bloqueo y proporciona una mejo...Vea Mas Un polímero polisiloxano-modificado con grupos terminales no saturados. Utilizado en los acabadosde madera y tintas de impresión. Mejora la nivelación, el deslizamiento y el alisamiento de superficie. Aumenta el efecto anti-bloqueo y proporciona una mejor humectación de substrato. Vea Menos | |
| Hydropalat® WE 3116 | BASF Formulation Additives | Hydropalat® WE 3116 (anteriormente Hydropalat® 215) es un dispersante para revestimientos acuosos. Es especialmente apto para las pastas de pigmentos libres de disolventes y aglutinantes. | |
| HYDROPALAT® WE 3120 | BASF Formulation Additives | HYDROPALAT® WE 3120 is a low-foaming wetting agent for the printing inks and adhesives industry. It can be used in the formulation of low foaming surfactant blends, especially these subjected to foam promoting mechanical energy. HYDROPALAT® WE 3120 can al...Vea Mas HYDROPALAT® WE 3120 is a low-foaming wetting agent for the printing inks and adhesives industry. It can be used in the formulation of low foaming surfactant blends, especially these subjected to foam promoting mechanical energy. HYDROPALAT® WE 3120 can also act as a good antifoam agent in numerous applications. Vea Menos | |
| Hydropalat® WE 3127 | BASF Formulation Additives | Hydropalat® WE 3127 (anteriormente Hydropalat® PLS 127) es un surfactante biodegradable para la humectación y dispersión de pigmentos en pinturas acuosas, tintas y adhesivos. | |
| Hydropalat® WE 3240 | BASF Formulation Additives | Hydropalat® WE 3240 (anteriormente Hydropalat® 140) es un promotor de flujo de baja espuma y agente humectante de sustratos para pinturas y revestimientos acuosos que se basa en polisiloxano modificado orgánicamente. En comparación con los agentes humecta...Vea Mas Hydropalat® WE 3240 (anteriormente Hydropalat® 140) es un promotor de flujo de baja espuma y agente humectante de sustratos para pinturas y revestimientos acuosos que se basa en polisiloxano modificado orgánicamente. En comparación con los agentes humectantes de sustrato en base a otros productos químicos, Hydropalat® WE 3240 provoca una reducción mucho mayor en la tensión interfacial estática. Incluso cuando está presente en una concentración de 0,5%, se pueden lograr valores mucho más bajos que 25 mN/m. Vea Menos | |
| Hydropalat® WE 3500 | BASF Formulation Additives | Hydropalat® WE 3500 exhibe una excelente nivelación de superficie y humectación de sustratos mientras evita los efectos secundarios como la aparición de cráteres, la estabilización de la espuma o los efectos en la adherencia entre capas. Se recomienda par...Vea Mas Hydropalat® WE 3500 exhibe una excelente nivelación de superficie y humectación de sustratos mientras evita los efectos secundarios como la aparición de cráteres, la estabilización de la espuma o los efectos en la adherencia entre capas. Se recomienda para aplicaciones de revestimientos industriales sofisticados al agua. Vea Menos | |
| HYDROPALAT® WE 3650 | BASF Formulation Additives | HYDROPALAT® WE 3650 is a clear, colorless to slightly yellow liquid. It is a highly effective wetting agent for water based coating and ink applications. The product shows excellent dynamic surface tension reduction in combination with low foam stabilizat...Vea Mas HYDROPALAT® WE 3650 is a clear, colorless to slightly yellow liquid. It is a highly effective wetting agent for water based coating and ink applications. The product shows excellent dynamic surface tension reduction in combination with low foam stabilization. HYDROPALAT® WE 3650 can effectively be used in lacquers or inks that show problems regarding substrate wetting or cratering. Due to its wetting properties the product can also have a positive effect on ink transfer and adhesion. Vea Menos |
