| Dispex® Ultra FA 4401 | BASF Formulation Additives | Dispex® Ultra FA 4401 (anteriormente Pluracoat® Dispersal DA 120) es un surfactante no iónico con excelentes propiedades de humectación y dispersión de pigmentos. Es compatible con otros surfactantes no iónicos, aniónicos y catiónicos. | |
| DISPEX® Ultra FA 4416 | BASF Formulation Additives | DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-...Vea Mas DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-emulsions. With its excellent wetting properties, DISPEX® Ultra FA 4416 when used with inorganic and organic pigments produces a high gloss and good color development in low and co-solvent free systems. DISPEX® Ultra FA 4416 prevents rub-out effects by using critical pigment combinations, e.g. titanium dioxide / phthalo blue. It is suitable for air and oven drying coatings as well as baking coatings. Since DISPEX® Ultra FA 4416 has no effect on pot-life it is also recommended for aqueous 2 pack PUR coatings. It allows the formulation of economical inorganic slurries and pigment concentrates for emulsion paints and consumer coatings. Here it combines the advantages of a low paste-viscosity with anti-settling characteristics and excellent compatibility to all types of aqueous base-paints. Vea Menos | |
| Efka® FA 4610 | BASF Formulation Additives | Efka® FA 4610 (anteriormente Efka® 5010) es aditivo humectante y dispersante aniónico para pigmentos inorgánicos. Ayuda a humectar y dispersar pigmentos inorgánicos y diluyentes, y es particularmente adecuado para revestimientos automotrices, industriales...Vea Mas Efka® FA 4610 (anteriormente Efka® 5010) es aditivo humectante y dispersante aniónico para pigmentos inorgánicos. Ayuda a humectar y dispersar pigmentos inorgánicos y diluyentes, y es particularmente adecuado para revestimientos automotrices, industriales generales, de bobinas y de curado ácido. Efka® FA 4610 podría tener un efecto catalizador en la reacción en esmaltes de secado al horno. Esto puede dar lugar al aumento de la viscosidad durante el almacenamiento. Vea Menos | |
| EFKA® FA 4644 | BASF Formulation Additives | EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigm...Vea Mas EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigment sedimentation, and increased gloss and improved flow. EFKA® FA 4644 is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. Vea Menos | |
| Hydropalat® WE 3127 | BASF Formulation Additives | Hydropalat® WE 3127 (anteriormente Hydropalat® PLS 127) es un surfactante biodegradable para la humectación y dispersión de pigmentos en pinturas acuosas, tintas y adhesivos. | |
| Hydropalat® WE 3158 | BASF Formulation Additives | Hydropalat® WE 3158 (anteriormente Hydropalat® 1580) es una solución acuosa de una mezcla de surfactantes no iónicos. | |
| Hydropalat® WE 3240 | BASF Formulation Additives | Hydropalat® WE 3240 (anteriormente Hydropalat® 140) es un promotor de flujo de baja espuma y agente humectante de sustratos para pinturas y revestimientos acuosos que se basa en polisiloxano modificado orgánicamente. En comparación con los agentes humecta...Vea Mas Hydropalat® WE 3240 (anteriormente Hydropalat® 140) es un promotor de flujo de baja espuma y agente humectante de sustratos para pinturas y revestimientos acuosos que se basa en polisiloxano modificado orgánicamente. En comparación con los agentes humectantes de sustrato en base a otros productos químicos, Hydropalat® WE 3240 provoca una reducción mucho mayor en la tensión interfacial estática. Incluso cuando está presente en una concentración de 0,5%, se pueden lograr valores mucho más bajos que 25 mN/m. Vea Menos | |
| HYDROPALAT® WE 3323 | BASF Formulation Additives | HYDROPALAT® WE 3323 is a non-ionic, 100% active wetting agent effective in water borne inks, OPV’s, and coatings intended for plastic, wood, and metal substrates. This wetting agent is effective in a wide variety of emulsion types including acrylics, styr...Vea Mas HYDROPALAT® WE 3323 is a non-ionic, 100% active wetting agent effective in water borne inks, OPV’s, and coatings intended for plastic, wood, and metal substrates. This wetting agent is effective in a wide variety of emulsion types including acrylics, styrenated acrylics and PUD’s. HYDROPALAT® WE 3323, in addition to its outstanding wetting properties, does not stabilize foam and can act as a defoamer in many coating and graphic art formulations. In addition, increasing levels of HYDROPALAT® WE 3323 wetting agents typically reduces foam content in coatings rather than increases it, as is typical of most competitive wetting agents. Vea Menos |
