| AEPD VOX 1000 | Univar Solutions | AEPD® VOX 1000 neutralizing amino alcohol is a multifunctional additive for low-odor, low-VOC interior water-based paints. The multifunctional nature allows significant reduction in primary dispersant, defoamer, glycols and coalescing agents. . | |
| ALKATERGE T | Univar Solutions | ALKATERGE T is a nonvolatile surface active agent which is a waxy solid at room temperature, only slightly soluble in water, yet soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible wit...Vea Mas ALKATERGE T is a nonvolatile surface active agent which is a waxy solid at room temperature, only slightly soluble in water, yet soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE-T is miscible with almost all organic liquids. ALKATERGE-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. Vea Menos | |
| AMP REGULAR | Univar Solutions | AMP REGULAR is a very efficient co-dispersant for pigments, and contributes pH stability, low odor, and anticorrosive properties; furthermore, it promotes acceptance of colorants. | |
| AMP-95 | Univar Solutions | AMP-95 is a multifunctional specialty additive with a relatively low viscosity provides numerous benefits including co-dispersing, neutralization, low odor, formaldehyde scavenging and meets various FDA approvals for indirect food contact. | |
| CHEMREZ 30 | Univar Solutions | CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and...Vea Mas CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and/or a let-down vehicle. As grinding vehicle it is the major component and is used in an approximate 2:1 ratio of resin solution to dry pigment. CHEMREZ 30 has been used with a wide range of organic pigments as well as carbon black. CHEMREZ 30 as a letdown vehicle can be used upwards of 50% of the formulation. Vea Menos | |
| DMAMP-80 | Univar Solutions | DMAMP-80 is one of the strongest tertiary amino alcohols commercially available, which can be used in water based systems to provide exceptional clarity, wettability and stability. | |
| DOWSIL™ 57 Additive | Univar Solutions | Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with ac...Vea Mas Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. Vea Menos | |
| Genapol® PF 40 | Univar Solutions | Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concent...Vea Mas Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This cloudy, colourless solution has good wetting and dispersing action coupled with low foaming tendency. Genapol® PF 40 is used as a low-foaming surfactant with very good dispersing action in detergents and cleaning agents. Typical applications include rinsing aids, detergents for dishwashers and bottle -rinsing machines and industrial cleaning formulations. Genapol® PF 40 is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. Vea Menos | |
| OROTAN™ 731 DP | Univar Solutions | OROTAN™ 731 DP is a formaldhyde free, free flowing, spray dry powder dispersant providing good gloss and hiding power at economical use levels. When formulated with a high performance binder and other high-quality additives, it can provide greater corrosi...Vea Mas OROTAN™ 731 DP is a formaldhyde free, free flowing, spray dry powder dispersant providing good gloss and hiding power at economical use levels. When formulated with a high performance binder and other high-quality additives, it can provide greater corrosion resistance for flat primers, low VOC paints, interior and exterior flat, sheen, and semi-gloss paints, and glossy topcoats. It lends to improved dispersing, stability, and film properties in a broad array of coating systems. Vea Menos | |
| SYLOJET® C30 | Univar Solutions | SYLOJET® C30 cationic silica dispersion is composed of unique, porous, fine-size particles designed for use in inkjet and other functional coatings. The fine size particles are small enough to be used as a lower layer in a multi-layer glossy inkjet coatin...Vea Mas SYLOJET® C30 cationic silica dispersion is composed of unique, porous, fine-size particles designed for use in inkjet and other functional coatings. The fine size particles are small enough to be used as a lower layer in a multi-layer glossy inkjet coating. The particle porosity generates excellent ink capacity in microporous coatings allowing outstanding print quality results for glossy inkjet coated media. The regular, almost spherical shape of the silica particles reduces binder demand and improves the folding strength of coatings on film and fabrics. Matte to semi- gloss finish level can be achieved with a single coat process; and high gloss obtained with an additional topcoat. Vea Menos | |
| TAMOL™ 1124 | Univar Solutions | TAMOL™ 1124 is a high performance hydrophilic copolymer dispersant at 50% solids in ammonia with excellent dispersibility to achieve low sheen to high gloss coatings. It has excellent stability and compatibility with polymers, pigments/fillers and additiv...Vea Mas TAMOL™ 1124 is a high performance hydrophilic copolymer dispersant at 50% solids in ammonia with excellent dispersibility to achieve low sheen to high gloss coatings. It has excellent stability and compatibility with polymers, pigments/fillers and additives, along with good viscosity, flow and wet adhesion. It is a universal dispersant for compatibility with associative rheology modifiers as it is compatible with both anionic HASE and nonionic HEUR rheology modifiers. Vea Menos | |
| TAMOL™ 1254 | Univar Solutions | TAMOL™ 1254 is a versatile, low-cost, low-foaming polyacid dispersant providing outstanding performance in a wide range of latex paint formulations. It is recommended for low sheen flats through gloss acrylic, styrene-acrylic and vinyl acrylic formulation...Vea Mas TAMOL™ 1254 is a versatile, low-cost, low-foaming polyacid dispersant providing outstanding performance in a wide range of latex paint formulations. It is recommended for low sheen flats through gloss acrylic, styrene-acrylic and vinyl acrylic formulations. In addition to good efficiency, this polyacid dispersant provides excellent stability and color acceptance even in formulations containing zinc oxide. Itt is supplied at 35% solids and is both ammonia and formaldehyde free. It is highly compatible with anionic HASE associative rheology modifiers. Vea Menos | |
| TAMOL™ 165A | Univar Solutions | TAMOL™ 165A is a pigment dispersant is a high-performance dispersant for latex gloss through flat paint. It is an ammonium salt of a hydrophobic copolymer dispersant which provides enhanced properties to latex paints resulting from improved water resistan...Vea Mas TAMOL™ 165A is a pigment dispersant is a high-performance dispersant for latex gloss through flat paint. It is an ammonium salt of a hydrophobic copolymer dispersant which provides enhanced properties to latex paints resulting from improved water resistance properties, including: wet adhesion, early blister resistance, water spot resistance and corrosion resistance. Vea Menos | |
| TAMOL™ 2002 | Univar Solutions | TAMOL™ 2002 is a high-performance hydrophobic copolymer dispersant especially suitable for semigloss and gloss paints. It is supplied in unneutralized emulsion form, free of any APEO surfactants, designed to be a performance match for TAMOL™ 2001 dispersa...Vea Mas TAMOL™ 2002 is a high-performance hydrophobic copolymer dispersant especially suitable for semigloss and gloss paints. It is supplied in unneutralized emulsion form, free of any APEO surfactants, designed to be a performance match for TAMOL™ 2001 dispersant. Relative to TAMOL™ 681, TAMOL™ 2002 provides reduced use cost, reduced as-supplied viscosity, lower odor, higher as-supplied solids, and formulation flexibility via choice of neutralizing base and absence of solvent. Sodium hydroxide, potassium hydroxide, sodium carbonate and AMP-95, as well as ammonia, can be used to neutralize the emulsion. Vea Menos | |
| TAMOL™ 681 | Univar Solutions | TAMOL™ 681 is a high-performance ammonium salt of a hydrophobic copolymer dispersant at 35% solids, formaldhyde-free, which can be used for a variety of applications, including interior and exterior latex paints and flooring adhesive formulations. Benefit...Vea Mas TAMOL™ 681 is a high-performance ammonium salt of a hydrophobic copolymer dispersant at 35% solids, formaldhyde-free, which can be used for a variety of applications, including interior and exterior latex paints and flooring adhesive formulations. Benefits include: compatibility and stability with fillers, ZnO and other reactive pigments, improved flow and film-build when used with nonionic rheology modifiers, maximum gloss potential, excellent water resistance and improved corrosion resistance. Vea Menos | |
| TAMOL™ 731A | Univar Solutions | TAMOL™ 731A is an extremely versatile hydrophobic dispersant for acrylic, butadiene/styrene, vinyl acetate/ethylene, and vinyl acrylic based coatings. Benefits include: very effective with inorganic pigments, high efficiency performance, exceptional gloss...Vea Mas TAMOL™ 731A is an extremely versatile hydrophobic dispersant for acrylic, butadiene/styrene, vinyl acetate/ethylene, and vinyl acrylic based coatings. Benefits include: very effective with inorganic pigments, high efficiency performance, exceptional gloss development, pigment wetting, wide range compatibility, compatibility with HEUR rheology modifiers. Vea Menos | |
| TAMOL™ 851 | Univar Solutions | TAMOL™ 851 is a versatile 30% solids polyacid pigment dispersant, free of ammonia and formaldehyde, with low-foam and used in a wide range of latex paint formulations. It is recommended for flat through semi-gloss acrylic, styrene/acrylic, and vinyl acryl...Vea Mas TAMOL™ 851 is a versatile 30% solids polyacid pigment dispersant, free of ammonia and formaldehyde, with low-foam and used in a wide range of latex paint formulations. It is recommended for flat through semi-gloss acrylic, styrene/acrylic, and vinyl acrylic by providing efficient dispersibility and compatibility with ZnO and other pigments/fillers, viscosity stability and highly compatible with anionic HASE associative rheology modifiers. Vea Menos | |
| TAMOL™ 901 | Univar Solutions | TAMOL™ 901 is ammonia form, polyacid dispersant for flats through semi-gloss latex paints, which exhibits excellent stability in paints containing zinc oxide and other reactive pigments. It is highly efficient, yet low foam generation. It is compatible wi...Vea Mas TAMOL™ 901 is ammonia form, polyacid dispersant for flats through semi-gloss latex paints, which exhibits excellent stability in paints containing zinc oxide and other reactive pigments. It is highly efficient, yet low foam generation. It is compatible with HASE rheology modifiers. Designed for traffic paint applications. Vea Menos | |
| TAMOL™ 945 | Univar Solutions | TAMOL™ 945 is a highly-effective polycarboxylic acid dispersant supplied at 45% solids in the sodium form. It is recommended for use in waterborne paint and coatings formulations by providing compatibility with anionic HASE associative rheology modifiers,...Vea Mas TAMOL™ 945 is a highly-effective polycarboxylic acid dispersant supplied at 45% solids in the sodium form. It is recommended for use in waterborne paint and coatings formulations by providing compatibility with anionic HASE associative rheology modifiers, excellent heat age and viscosity stability. It is very low foaming and is very efficient in dispersing mineral slurries. Vea Menos | |
| TAMOL™ 960 | Univar Solutions | TAMOL™ 960 is a high molecular weight polyacid dispersant for flats through semi-gloss latex paints. Excellent stability in paints containing zinc oxide and other reactive pigments. Highly efficient. Low foam generation. Compatible with HASE rheology modi...Vea Mas TAMOL™ 960 is a high molecular weight polyacid dispersant for flats through semi-gloss latex paints. Excellent stability in paints containing zinc oxide and other reactive pigments. Highly efficient. Low foam generation. Compatible with HASE rheology modifiers. Vea Menos | |
| TAMOL™ 963 | Univar Solutions | TAMOL™ 963 is a versatile, low-cost, low foaming, water-soluble polyacid dispersant recommended for low sheen flat through semi-gloss acrylic, styrene-acrylic and vinyl acrylic formulations and is effective over a pH range of 7 to 11 with a wide temperatu...Vea Mas TAMOL™ 963 is a versatile, low-cost, low foaming, water-soluble polyacid dispersant recommended for low sheen flat through semi-gloss acrylic, styrene-acrylic and vinyl acrylic formulations and is effective over a pH range of 7 to 11 with a wide temperature range. It is supplied at 35% solids in the ammonia form and highly compatible with anionic HASE associative rheology modifiers. It t can be used with ACRYSOL™TM DR series of rheology modifier products to offer excellent heat age and viscosity stability. It has excellent color acceptance with glycol and water dispersed colorants including hard to disperse pigments such as red iron oxide. Features B. Vea Menos | |
| TAMOL™ 983 | Univar Solutions | TAMOL™ 983 is a versatile, low-cost, low foaming, 35% solids, water-soluble polyacid dispersant in potassium form. It is recommended for low sheen flat through semi-gloss acrylic, styrene-acrylic and vinyl-acrylic formulations and is effective over a pH r...Vea Mas TAMOL™ 983 is a versatile, low-cost, low foaming, 35% solids, water-soluble polyacid dispersant in potassium form. It is recommended for low sheen flat through semi-gloss acrylic, styrene-acrylic and vinyl-acrylic formulations and is effective over a pH range of 7 to 11 with a wide temperature range. It is highly compatible with anionic HASE associative rheology modifiers providing excellent heat age and viscosity stability. It has excellent color acceptance with glycol and water dispersed colorants, including hard to disperse pigments such as red iron oxide. Vea Menos |
