| ADDITOL® XL 122 | Allnex | Aditivo de pintura para aumentar la resistencia al rayado y al deslizamiento, y para mejorar el flujo y la nivelación en pinturas de secado del aire y al horno. | Request Sample |
| ADDITOL® XW 329 | Allnex | Aditivo de pintura para aumentar la resistencia al rayado, el deslizamiento y la nivelación, particularmente en las pinturas diluibles en agua. | Request Sample |
| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| ALUMINASOL™ AS-200 | Nissan Chemical America Corporation | El ALUMINASOL™ AS-200 es una alúmina acuosa coloidal que se puede usar en muchas aplicaciones con catalizadores, fibra de vidrio, telas, fibras textiles y sintéticas. La viscosidad del AS-200 a 20 °C es mayor que la del AS-100. ALUMINASOL™ aporta propieda...Vea Mas El ALUMINASOL™ AS-200 es una alúmina acuosa coloidal que se puede usar en muchas aplicaciones con catalizadores, fibra de vidrio, telas, fibras textiles y sintéticas. La viscosidad del AS-200 a 20 °C es mayor que la del AS-100. ALUMINASOL™ aporta propiedades antiestáticas, resistencia al calor, resistencia a la adhesión, capacidad peliculígena y adhesión a los productos en los que se aplica. Vea Menos | Request Sample |
| AQUACER® 1547 | BYK | Cera de emulsión para mejorar las propiedades de superficie de los revestimientos de lata transmitidos por agua. Emulsión aniónica de una cera de polietileno oxidado de dispersion alta. | |
| AQUACER® 513 | BYK | Ceras de emulsión para mejorar la protección superficial de los sistemas de la pintura y de las tintas de impresión acuosos. Emulsión no-iónica basada en una cera oxidada del polietileno de dispersión alta. | |
| AQUACER® 552 | BYK | Ceras de emulsión para mejorar la protección superficial de los sistemas de la pintura y de la tintas de impresión, acuosos. Emulsión no iónica basada en una cera oxidada del polietileno de dispersión alta. | |
| AQUAMAT® 208 | BYK | Dispersiones acuosas de cera para matizado, para mejorar las propiedades de superficie de los sistemas de pintura y de tintas de impresión, transmitidos por agua. Dispersión oxidada de cera de polietileno de dispersión alta. | |
| AQUAMAT® 263 | BYK | Dispersiones acuosas de cera para matizado, para mejorar las propiedades de superficie de los sistemas de la pintura y de las tintas de impresión, transmitidos por agua. Dispersión oxidada de cera de polietileno de dispersión alta. | |
| Boltorn™ P501 | Univar Solutions | Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cu...Vea Mas Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cured coatings while maintaining all the other properties of Boltorn™ P501. Vea Menos | |
| Boltorn™ P501 | Perstorp | Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cu...Vea Mas Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cured coatings while maintaining all the other properties of Boltorn™ P501. Vea Menos | |
| Borchi® Gol LA 2 | OMG Borchers GmbH | Borchi® Gol LA 2 es un agente tensoactivo sin VOC a base de un compuesto de silicona organomodificado. Mejora las características de flujo y nivelación de los sistemas de revestimientos solubles en agua, a base de disolventes y sin disolventes. Este produ...Vea Mas Borchi® Gol LA 2 es un agente tensoactivo sin VOC a base de un compuesto de silicona organomodificado. Mejora las características de flujo y nivelación de los sistemas de revestimientos solubles en agua, a base de disolventes y sin disolventes. Este producto genera una reducción media de la tensión superficial y puede utilizarse en barnices transparentes o en los sistemas de revestimientos pigmentados. Borchi® Gol LA 2 se caracteriza por la buena compatibilidad aglutinante y por ser particularmente apto para usar en pinturas finales curadas en forma química a base de hidroxilos que contienen poliacrilatos y poliésteres, principalmente, en los sistemas de poliéster-melamina o epoxi. Además, ayuda en la nivelación de los acabados curados físicamente a base de poliacrilatos y alquídicos de cadenas cortas, medianas y largas. Se recomienda el uso de este producto especialmente en aquellos sistemas en los que es necesario usar ciertos disolventes o aditivos sin disolventes. Para facilitar la capacidad de incorporación, puede ser útil disolver Borchi® Gol LA 2 en disolventes a base de glicol, éster, disolventes alifáticos o aromáticos. Vea Menos | |
| BRB Siloen® SMA 284 | BRB International BV | BRB Siloen® SMA 284 is an 80% active dispersion of a high molecular weight silicone gum. It can be used as a silicone additive for waterborne and solvent coatings providing excellent slip, mar resistance, gloss and anti-blocking effect. | |
| BYK®-306 | BYK | Aditivo de superficie de silicón con una reducción fuerte de tensión de superficie. Solución de un polidimetilsiloxano polieter-modificado. | |
| BYK®-333 | BYK | Aditivo de superficie de silicón con una reducción fuerte de tensión de superficie. Polidimetilsiloxano poliéter-modificado. | |
| CERACOL® 79 | BYK | Dispersión de cera para mejorar las propiedades de superficie de revestimientos de lata. Dispersión de cera de Carnauba. | |
| CERAFAK® 140N | BYK | Dispersión de cera para mejorar las propiedades de superficie de revestimientos de lata. Dispersión de cera de Carnauba. | |
| CERAFLOUR® 920 | BYK | Polímero orgánico micronizado para sistemas de pintura de estera transmitidos por agua y transmitidos por solvente. Polímero orgánico micronizado. | |
| CERAFLOUR® 950 For Powder | BYK | Aditivo de estera para revestimientos en polvo. Cera de polietileno, de alta densidad, modificada, micronizada. | |
| CERAFLOUR® 965 | BYK | Aditivo eficiente para lograr estructuras finas homogéneas. PTFE (Politetrafluoroetileno) micronizado. | |
| CERAFLOUR® 994 | BYK | Cera micronizada para mejorar las propiedades de superficie de los sistemas de pintura transmitidos por solvente y de los revestimientos en polvo. Cera amida ultra-fina, micronizada. | |
| CERAFLOUR® 999 | BYK | CERAFLOUR® 999 is an extra-fine, micronized PTFE-modified polyethylene wax for organic cosolvent-containing aqueous, solvent-borne, solvent-free, and UV coating systems, powder coatings, and printing inks to improve surface properties such as scratch and ...Vea Mas CERAFLOUR® 999 is an extra-fine, micronized PTFE-modified polyethylene wax for organic cosolvent-containing aqueous, solvent-borne, solvent-free, and UV coating systems, powder coatings, and printing inks to improve surface properties such as scratch and abrasion resistance. Vea Menos | |
| CERAMAT® 248 | BYK | Dispersión de cera para matizado, usada para mejorar las propiedades de superficie de pinturas decorativas solvente-transmitidas. Dispersión de cera de polietileno. | |
| CERAMAT® 258 | BYK | Dispersión de cera usada para mejorar las propiedades de superficie de revestimientos para madera e industriales, solvente-transmitidos. Dispersión oxidada de alta densidad de cera de polietileno. | |
| COATOSIL* 2812 COATINGS ADDITIVE | Momentive | El silano CoatOSil 2287 Poliuretano ede proporcionar rendimiento de reticulacion de estante estable que no amarillea para mejorar las propiedades físicas de los polímeros de dispersión transmitidos por agua, tales como poliuretano y látex de acrílico. Cu...Vea Mas El silano CoatOSil 2287 Poliuretano ede proporcionar rendimiento de reticulacion de estante estable que no amarillea para mejorar las propiedades físicas de los polímeros de dispersión transmitidos por agua, tales como poliuretano y látex de acrílico. Cuando el silano de CoatOsil 2287 se incorpora como promotor de reticulador o de adherencia, Poliuretano ede proveer de resistencia de agua mejorada y adherencia en lo mojado, buena estabilidad del estante. Vea Menos | |
| COATOSIL* 3500 COATINGS ADDITIVE | Momentive | El aditivo de revestimientos CoatOSil* 2400 es un silicón polietileno óxido-modificado con un grado de modificación inusualmente alto, haciéndolo muy compatible con los solventes y las resinas transmitidos por agua, y compatible con los sistemas transmiti...Vea Mas El aditivo de revestimientos CoatOSil* 2400 es un silicón polietileno óxido-modificado con un grado de modificación inusualmente alto, haciéndolo muy compatible con los solventes y las resinas transmitidos por agua, y compatible con los sistemas transmitidos por solvente. Vea Menos | |
| COATOSIL* 3501 COATINGS ADDITIVE | Momentive | El aditivo para revestimientos CoatOSil* 3501 es el agente reductor de fricción más potente de Momentive, que brinda la máxima reducción en coeficiente de fricción (COF) para formulaciones curadas por radiación en su cartera de aditivos para revestimiento...Vea Mas El aditivo para revestimientos CoatOSil* 3501 es el agente reductor de fricción más potente de Momentive, que brinda la máxima reducción en coeficiente de fricción (COF) para formulaciones curadas por radiación en su cartera de aditivos para revestimientos. Este aditivo también funciona como un desespumador extremadamente eficiente, en especial, en sistemas acuosos. Vea Menos | |
| COATOSIL* 3509 COATINGS ADDITIVE | Momentive | El aditivo para revestimientos CoatOSil* 3509 es un agente de deslizamiento activo con 100 % de reactividad que puede ayudar a mejorar la resistencia a la abrasión y el deterioro en resinas acriladas curadas con luz UV y haces de electrones. Entre los ben...Vea Mas El aditivo para revestimientos CoatOSil* 3509 es un agente de deslizamiento activo con 100 % de reactividad que puede ayudar a mejorar la resistencia a la abrasión y el deterioro en resinas acriladas curadas con luz UV y haces de electrones. Entre los beneficios adicionales, se incluyen una fluidez y uniformidad mejoradas, humectación del sustrato y retención de brillo. Vea Menos | |
| CRAYVALLAC® WN-1135 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance,...Vea Mas CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. Vea Menos | |
| CRAYVALLAC® WN-1495 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide ...Vea Mas CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide range of coating applications, and in some cases it offers the formulator additional performance benefits. Vea Menos | |
| CRAYVALLAC® WN-1535 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhanc...Vea Mas CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. CRAYVALLAC® WN-1535 is suitable for use in a wide range of solvent-based, water-based, solvent free and powder coatings applications. Vea Menos | |
| CRAYVALLAC® WW-1001 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the ...Vea Mas CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. Vea Menos | |
| DC Sealing Coating | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the prime...Vea Mas DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the primer. Vea Menos | |
| DOWSIL™ 11 Additive | Univar Solutions | Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coat...Vea Mas Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. Vea Menos | |
| DOWSIL™ 11 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coat...Vea Mas Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. Vea Menos | |
| DOWSIL™ 14 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbino...Vea Mas Dow Corning® 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol functionality, supplied as 10% active concentration. Vea Menos | |
| DOWSIL™ 18 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 18 Additive is a non-reactive high-molecular-weight polydimethyl siloxane dispersion containing no volatile solvent. It provides slip and mar resistance for solvent-based coatings as well as a mar resistance for water-based coatings and inks. | |
| DOWSIL™ 210S Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and...Vea Mas Dow Corning® 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enhancing anti-blocking. Vea Menos | |
| DOWSIL™ 211S Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It...Vea Mas DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It also offers high compatibility, solvent dilution, and performs at very low dosage which are essential features for coating formulators. Vea Menos | |
| DOWSIL™ 23 N Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 23 N Additive is a silicone additive for solvent and aqueous coatings. It is a white elastomeric silicone powder that contains epoxy groups. This product is resistant to scratching and general marking, and provides a matte finish. | |
| DOWSIL™ 33 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, incr...Vea Mas Dow Corning® 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases mar resistance, contains epoxy functionality, and does not impact recoatability. Vea Menos | |
| DOWSIL™ 51 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 51 Additive is an ultra-high-molecular-weight polydimethylsiloxane dispersion in paste form, supplied at 80% solids. It reduces coefficient of friction, provides antiblocking and improves mar resistance. | |
| DOWSIL™ 52 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 52 Additive is an ultra-high molecular weight silicone dispersion in water, supplied at 65% solids. It reduces static and dynamic coefficient of friction and improves mar resistance in coatings and inks applications. | |
| DOWSIL™ 55 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces crateri...Vea Mas Dow Corning® 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, and prevents pinholing, orange peel, and cissing. Vea Menos | |
| DOWSIL™ 56 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based ...Vea Mas Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. Vea Menos | |
| DOWSIL™ 56 Additive | Univar Solutions | Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based ...Vea Mas Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. Vea Menos | |
| DOWSIL™ 57 Additive | Univar Solutions | Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with ac...Vea Mas Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. Vea Menos | |
| DOWSIL™ 57 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with ac...Vea Mas Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. Vea Menos | |
| Durazane® 1500 rapid cure | Merck | Durazane® 1500 rapid cure is a liquid low-viscous, solvent-free polysilazane resin to be employed as coating binder. It can be used for scratch resistant coatings as used in automotive interior or exterior applications. | |
| Durazane® 1500 slow cure | Merck | Durazane® 1500 slow cure is a liquid low-viscous, solvent-free polysilazane resin to be employed as coating binder. It can be used for scratch resistant coatings as used in automotive interior or exterior applications. | |
| Durazane® 5500 | Merck | Durazane® 5500 is a composite material consisting of an amorphous SiO2 core and a polymer cladding material. Since the nano particles are completely incoperated in a polymeric matrix, no nanoscalic dust is produced when the solvent is removed. The dried r...Vea Mas Durazane® 5500 is a composite material consisting of an amorphous SiO2 core and a polymer cladding material. Since the nano particles are completely incoperated in a polymeric matrix, no nanoscalic dust is produced when the solvent is removed. The dried residue has polymeric characteristics like film building and transparent properties. Vea Menos | |
| EBECRYL® 3418 | Allnex | EBECRYL® 3418 es un diacrilato epoxi modificado que presenta una excelente reactividad y baja viscosidad. Las películas de EBECRYL® 3418 curadas por luz ultravioleta (UV) o haz de electrones (EB) ofrecen una alta flexibilidad, brillo, dureza, adherencia y...Vea Mas EBECRYL® 3418 es un diacrilato epoxi modificado que presenta una excelente reactividad y baja viscosidad. Las películas de EBECRYL® 3418 curadas por luz ultravioleta (UV) o haz de electrones (EB) ofrecen una alta flexibilidad, brillo, dureza, adherencia y resistencia superior a los arañazos y a los productos químicos. Vea Menos | Request Sample |
| EBECRYL® 50 | Allnex | EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured ...Vea Mas EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured coatings and inks. Besides its high reactivity, EBECRYL® 50 improves the hardness and solvent resistance of cured coatings and inks. This product is particularly useful in offset inks, flexo inks and overprint varnishes. Vea Menos | Request Sample |
| EBECRYL® 8602 | Allnex | EBECRYL® 8602 es un acrilato de uretano alifático funcional. Después de la polimerización, las películas de EBECRYL® 8602 presentan una mejora significativa en la resistencia a la intemperie en comparación con el acrilato de uretano alifático hexafunciona...Vea Mas EBECRYL® 8602 es un acrilato de uretano alifático funcional. Después de la polimerización, las películas de EBECRYL® 8602 presentan una mejora significativa en la resistencia a la intemperie en comparación con el acrilato de uretano alifático hexafuncional sin comprometer la resistencia al rayado y a la abrasión. Además, EBECRYL® 8602 no contiene compuestos orgánicos de estaño, metales pesados* o quinonas añadidos intencionadamente. Vea Menos | Request Sample |
| EBECRYL® 895 | Allnex | Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and E...Vea Mas Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required. Vea Menos | Request Sample |
| Efka® 3229 | BASF Formulation Additives | Aditivo muy eficaz, que aumenta deslizamiento, suavidad y brillo de superficie. Debido a sus propiedades de compatibilidad excelentes, su uso es muy adecuado en revestimientos para madera transparentes y de alto brillo. | |
| EFKA® SL 3030 | BASF Formulation Additives | EFKA® SL 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysil...Vea Mas EFKA® SL 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysiloxane, this slip & leveling agent is universally compatible with various coating systems and does not cause cratering even in excessively high concentrations. Vea Menos | |
| EFKA® SL 3033 | BASF Formulation Additives | EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and crater...Vea Mas EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and cratering. It is an organically modified polysiloxane. Vea Menos | |
| EFKA® SL 3236 | BASF Formulation Additives | EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray accep...Vea Mas EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. EFKA® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. Vea Menos | |
| Efka® SL 3239 | BASF Formulation Additives | Polisiloxano modificado orgánicamente, soluble en hidrocarburos alifáticos y aromáticos, esteres y cetonas; insoluble en agua. Mejora nivelación y suavidad de superficie, aumenta el deslizamiento y la resistencia al estropeo, y actúa como facilitador de ...Vea Mas Polisiloxano modificado orgánicamente, soluble en hidrocarburos alifáticos y aromáticos, esteres y cetonas; insoluble en agua. Mejora nivelación y suavidad de superficie, aumenta el deslizamiento y la resistencia al estropeo, y actúa como facilitador de antiespumación y desaireación. Vea Menos | |
| Epoxy Modified Resin Black Anti-Corrosive Coating (90-6 II) | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | Epoxy Modified Resin Black Anti-Corrosive Coating (90-6 II) is a coating that is used for its anti-corrosion, adhesion, and acid, alkali, salt spray, solvent and weather resistance properties. It is commonly applied on the surface of stamping parts, autom...Vea Mas Epoxy Modified Resin Black Anti-Corrosive Coating (90-6 II) is a coating that is used for its anti-corrosion, adhesion, and acid, alkali, salt spray, solvent and weather resistance properties. It is commonly applied on the surface of stamping parts, automobile chassis parts, wind driven generators, bridges, steel structures, and various metals. Vea Menos | |
| GENGLAZE® EC-2447 | Synthomer | GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally f...Vea Mas GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally friendly as it does not contain solvents (100% solids), and reduces the number of surface finishing steps and manufacturing costs. Vea Menos | |
| HS972 | Tianyi Chemical Engineering Material Co., Ltd. | HS972, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...Vea Mas HS972, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 3.7 and 4.5. Vea Menos | |
| HS974 | Tianyi Chemical Engineering Material Co., Ltd. | HS974, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...Vea Mas HS974, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 5.5 and 8.0. Vea Menos | |
| HS976 | Tianyi Chemical Engineering Material Co., Ltd. | HS976, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...Vea Mas HS976, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 5.5 and 8.0. Vea Menos | |
| Inorganic Zinc Flake Anti-corrosive Coating (90-1) | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | Inorganic Zinc Flake Anti-Corrosive Coating (90-1) is a coating that is used for its anti-corrosion, and weather, oil, and climate resistance properties. It is commonly applied to the surface of automobiles, steel structures, and metal products. | |
| LUDOX® CL-P | Univar Solutions | LUDOX® CL-P can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may hav...Vea Mas LUDOX® CL-P can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may have possible utility, LUDOX® CL-P and CL-X have been specially formulated to give superior performance and easy cleanup from coating machine surfaces. Vea Menos | |
| LUDOX® CL-X | Univar Solutions | LUDOX® CL-X can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may hav...Vea Mas LUDOX® CL-X can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may have possible utility, LUDOX CL-P and CL-X have been specially formulated to give superior performance and easy cleanup from coating machine surfaces. Vea Menos | |
| MOR-SHINE™ 4U | Synthomer | MOR-SHINE™ 4U is a general purpose and cost effective floor polish concentrate. MOR-SHINE™ 4U dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance, is used for general purpose finishes that respond to low and...Vea Mas MOR-SHINE™ 4U is a general purpose and cost effective floor polish concentrate. MOR-SHINE™ 4U dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance, is used for general purpose finishes that respond to low and high maintenance schedules. Vea Menos | |
| NANOBYK®-3603 | BYK | NANOBYK®-3603 es un aditivo para superficies basado en nanopartículas de óxido de aluminio para mejorar la resistencia al rayado de sistemas acuosos, sin impactar negativamente en propiedades tales como el brillo y la transparencia. Dado que las nanopartí...Vea Mas NANOBYK®-3603 es un aditivo para superficies basado en nanopartículas de óxido de aluminio para mejorar la resistencia al rayado de sistemas acuosos, sin impactar negativamente en propiedades tales como el brillo y la transparencia. Dado que las nanopartículas de óxido de aluminio son muy pequeñas, es aún más adecuado para revestimientos de alto brillo y sumamente transparentes, y se pueden utilizar en sistemas claros o pigmentados. Vea Menos | |
| NANOBYK®-3605 | BYK | Aditivos que contienen nano-partículas para sistemas solvente y sin solvente, radiación-curados, para mejorar la resistencia a la rayadura y a la abrasión. | |
| NANOBYK®-3620 | BYK | NANOBYK®-3620 es una dispersión acuosa libre de VOC formada por partículas nanohíbridas, para proteger capas superiores brillosas, acuosas, pigmentadas y no pigmentadas del rayado y la abrasión. Esta propiedad protectora surte efecto rápidamente solamente...Vea Mas NANOBYK®-3620 es una dispersión acuosa libre de VOC formada por partículas nanohíbridas, para proteger capas superiores brillosas, acuosas, pigmentadas y no pigmentadas del rayado y la abrasión. Esta propiedad protectora surte efecto rápidamente solamente luego de un período de secado. NANOBYK®-3620 no tiene influencias negativas en el brillo y la transparencia, y por lo tanto, es especialmente apropiada para capas transparentes. Vea Menos | |
| NANOBYK®-3650 | BYK | Aditivo de superficie que contienen nano-materiales para sistemas transmitidos por solvente, para mejorar la resistencia a la rayadura. Dispersión de nano-partículas de silicona superficie-tratadas. | |
| NANOBYK®-3652 | BYK | Dispersiones de nano-particulas de silicona, superficie-tratadas. | |
| NANOPOL® C 750 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 750 shows very high performance in scratch- and abrasion-resistance without influencing the gloss or transparency of waterborne coatings. | Request Sample |
| NANOPOL® C 784 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 784 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the coating. | Request Sample |
| NANOPOX® C 620 | Evonik Operations GmbH, BL Coating Additives | NANOPOX® C 620 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured cationic UV-coating. | Request Sample |
| ORGANOSILICASOL™ DMAC-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ DMAC-ST es sílice coloidal monodispersa en el disolvente orgánico N,N-Dimetilacetamida. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras...Vea Mas El ORGANOSILICASOL™ DMAC-ST es sílice coloidal monodispersa en el disolvente orgánico N,N-Dimetilacetamida. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ EG-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ EG-ST es sílice coloidal monodispersa en el disolvente orgánico etilenglicol. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicacio...Vea Mas El ORGANOSILICASOL™ EG-ST es sílice coloidal monodispersa en el disolvente orgánico etilenglicol. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ IPA-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ IPA-ST es sílice coloidal monodisperso en el disolvente orgánico alcohol isopropílico con una partícula de 10 a15 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimient...Vea Mas El ORGANOSILICASOL™ IPA-ST es sílice coloidal monodisperso en el disolvente orgánico alcohol isopropílico con una partícula de 10 a15 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ IPA-ST-L | Nissan Chemical America Corporation | El ORGANOSILICASOL™ IPA-ST-L es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 40 a 50 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimi...Vea Mas El ORGANOSILICASOL™ IPA-ST-L es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 40 a 50 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ IPA-ST-UP | Nissan Chemical America Corporation | El ORGANOSILICASOL™ IPA-ST-UP es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 40 a 100 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revesti...Vea Mas El ORGANOSILICASOL™ IPA-ST-UP es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 40 a 100 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ IPA-ST-ZL | Nissan Chemical America Corporation | El ORGANOSILICASOL™ IPA-ST-ZL es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 70 a 100 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revesti...Vea Mas El ORGANOSILICASOL™ IPA-ST-ZL es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 70 a 100 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ MA-ST-MS | Nissan Chemical America Corporation | Sílice coloidal monodispersa en disolvente orgánico. Se utiliza para mejorar significativamente la resistencia al rayado, astillado y desgaste de plásticos, pinturas barnices y tintas. | Request Sample |
| ORGANOSILICASOL™ MEK-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ MEK-ST es sílice coloidal monodispersa en el disolvente orgánico metiletilcetona con un tamaño de partícula de 10 a 15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en...Vea Mas El ORGANOSILICASOL™ MEK-ST es sílice coloidal monodispersa en el disolvente orgánico metiletilcetona con un tamaño de partícula de 10 a 15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ MIBK-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ MIBK-ST es sílice coloidal monodispersa en el disolvente orgánico metil-isobutil-cetona con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimient...Vea Mas El ORGANOSILICASOL™ MIBK-ST es sílice coloidal monodispersa en el disolvente orgánico metil-isobutil-cetona con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ MT-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ MT-ST es sílice coloidal monodispersa en el disolvente orgánico alcohol metílico con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en p...Vea Mas El ORGANOSILICASOL™ MT-ST es sílice coloidal monodispersa en el disolvente orgánico alcohol metílico con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ NPC-ST-30 | Nissan Chemical America Corporation | El ORGANOSILICASOL™ NPC-ST-30 es sílice coloidal monodispersa en el disolvente orgánico etilenglicol mono-n-propil éter con un tamaño de partícula de 10 a 15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste d...Vea Mas El ORGANOSILICASOL™ NPC-ST-30 es sílice coloidal monodispersa en el disolvente orgánico etilenglicol mono-n-propil éter con un tamaño de partícula de 10 a 15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ PMA-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ PMA-ST es sílice coloidal monodispersa en el disolvente orgánico acetato del monometileter del propilenglicol con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y de...Vea Mas El ORGANOSILICASOL™ PMA-ST es sílice coloidal monodispersa en el disolvente orgánico acetato del monometileter del propilenglicol con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| R-8004 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...Vea Mas R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8004 has ≥70% siloxane content. Vea Menos | |
| R-8005 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...Vea Mas R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8005 has ≥50% siloxane content. Vea Menos | |
| Raybo 26 Slikit | Raybo Chemical | Raybo 26 Slikit is a non-silicone based additive in a brown liquid form. This product is most commonly used to improve scratch and mar-resistance in air-dry and low-bake coating system applications. | |
| Raybo 43 MarHard | Raybo Chemical | Raybo 43 MarHard is a silicone-free additive in a workable paste to thin liquid form, depending on temperature. This product is most commonly used to improve scratch and mar resistance in solventborne bake coating and ink system applications. | |
| Raybo 68 HydroSlip | Raybo Chemical | Raybo 68 HydroSlip is a coating and ink additive in a white liquid form. This product is most commonly used to improve flow control, mar resistance, and slip in water-based and water-reducible coating and ink system applications. | |
| SI-TUFF™ SB-050G | Advanced Composite Materials, LLC | SI-TUFF™ SB-050G is an engineered silicon carbide blend, powered by a diamond-like microfiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resista...Vea Mas SI-TUFF™ SB-050G is an engineered silicon carbide blend, powered by a diamond-like microfiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in all forms of polymeric coatings, including liquid, spray-on, and powder applications. Vea Menos | |
| SI-TUFF™ SB-300G | Advanced Composite Materials, LLC | SI-TUFF™ SB-300G is an engineered blend powered by a diamond-like fiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductiv...Vea Mas SI-TUFF™ SB-300G is an engineered blend powered by a diamond-like fiber that toughens protective coatings and extends their useful lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in all forms of polymeric coatings, including liquid, spray-on, and powder applications. Vea Menos | |
| SI-TUFF™ SC-050 | Advanced Composite Materials, LLC | SI-TUFF™ SC-050 is a diamond-like silicon carbide microfiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, tem...Vea Mas SI-TUFF™ SC-050 is a diamond-like silicon carbide microfiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. Vea Menos | |
| SI-TUFF™ SC-110 | Advanced Composite Materials, LLC | SI-TUFF™ SC-110 is an amine-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature st...Vea Mas SI-TUFF™ SC-110 is an amine-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. Vea Menos | |
| SI-TUFF™ SC-210 | Advanced Composite Materials, LLC | SI-TUFF™ SC-210 is an epoxy-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature st...Vea Mas SI-TUFF™ SC-210 is an epoxy-functionalized grade of SC-050 used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. Vea Menos | |
| SI-TUFF™ SC-300 | Advanced Composite Materials, LLC | SI-TUFF™ SC-300 is a diamond-like silicon carbide fiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, tempera...Vea Mas SI-TUFF™ SC-300 is a diamond-like silicon carbide fiber additive used to toughen protective coatings and extend their lifetime. Available as a dry powder or an aqueous dispersion, it improves abrasion and scratch resistance, thermal conductivity, temperature stability, and hardness. This product is ideal for use in a wide variety of coating applications - including consumer cookware, industrial bakeware, industrial piping, super durable polyurethane, industrial fluoropolymer, and epoxy-Novolac. Vea Menos | |
| SLIP-AYD® FS 444 | Elementis | SLIP-AYD® FS 444 es un aditivo líquido para mejorar las propiedades de superficie y la resistencia a los rayones en revestimientos acuosos y a base de solventes polares. | |
| SNOWTEX® IPA-ST-UP | Nissan Chemical America Corporation | SNOWTEX® IPA-ST-UP crea una serie de partículas alargadas. Comparadas con las partículas de sílice esféricas, las partículas alargadas de SNOWTEX® IPA-ST-UP ofrecen varias ventajas únicas. Se caracteriza por la excelente capacidad peliculígena, la buena a...Vea Mas SNOWTEX® IPA-ST-UP crea una serie de partículas alargadas. Comparadas con las partículas de sílice esféricas, las partículas alargadas de SNOWTEX® IPA-ST-UP ofrecen varias ventajas únicas. Se caracteriza por la excelente capacidad peliculígena, la buena adhesión, la buena migración y la alta viscosidad de <20 mPa•s. Este productos se estabiliza en IPA. Tiene aplicaciones como agente de revestimiento para papel, plásticos y metales, un aglutinante parar tratamientos refractarios, cerámicos, fibra de vidrio y textiles. Vea Menos | Request Sample |
| SNOWTEX® ST-20L | Nissan Chemical America Corporation | El SNOWTEX® ST-20L es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <3 mPa•s. Últimamente, se ha utilizado en la industria de semiconductores como agente pulidor para placas...Vea Mas El SNOWTEX® ST-20L es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <3 mPa•s. Últimamente, se ha utilizado en la industria de semiconductores como agente pulidor para placas de silicio. Otras aplicaciones del SNOWTEX® ST-20L incluyen un aglutinante catalizador, tratamiento textil, pulido, aglutinante para fundiciones, pinturas/revestimientos, tratamiento refractario, anticorrosivo y de superficies metálicas. Vea Menos | Request Sample |
| SNOWTEX® ST-40 | Nissan Chemical America Corporation | SNOWTEX® ST-40 es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. La viscosidad de este producto es de <25 mPa•s. Se aplica como aglutinante catalizador, tratamiento textil, pulidor, aglutinante para tratamientos ...Vea Mas SNOWTEX® ST-40 es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. La viscosidad de este producto es de <25 mPa•s. Se aplica como aglutinante catalizador, tratamiento textil, pulidor, aglutinante para tratamientos de superficies de fundición, de pintura/revestimiento, refractarias, anticorrosión y metálicas. Vea Menos | Request Sample |
