| ADDITOL® P 791 | Allnex | ADDITOL® P 791 es un sólido endurecedor polianhídrido alifático para utilizar con resinas acrílicas sólidas que contienen grupos glicidilo para la fabricación de revestimiento en polvo. La proporción de aglutinante depende del peso equivalente de la resin...Vea Mas ADDITOL® P 791 es un sólido endurecedor polianhídrido alifático para utilizar con resinas acrílicas sólidas que contienen grupos glicidilo para la fabricación de revestimiento en polvo. La proporción de aglutinante depende del peso equivalente de la resina glicilo funcional empleada. Vea Menos | Request Sample |
| ALUMINASOL™ AS-200 | Nissan Chemical America Corporation | El ALUMINASOL™ AS-200 es una alúmina acuosa coloidal que se puede usar en muchas aplicaciones con catalizadores, fibra de vidrio, telas, fibras textiles y sintéticas. La viscosidad del AS-200 a 20 °C es mayor que la del AS-100. ALUMINASOL™ aporta propieda...Vea Mas El ALUMINASOL™ AS-200 es una alúmina acuosa coloidal que se puede usar en muchas aplicaciones con catalizadores, fibra de vidrio, telas, fibras textiles y sintéticas. La viscosidad del AS-200 a 20 °C es mayor que la del AS-100. ALUMINASOL™ aporta propiedades antiestáticas, resistencia al calor, resistencia a la adhesión, capacidad peliculígena y adhesión a los productos en los que se aplica. Vea Menos | Request Sample |
| AQUACER® 507 | BYK | Ceras de emulsión para mejorar las propiedades de superficie de los sistemas de pintura transmitidos por agua. Emulsión aniónica de una cera oxidada de polietileno de HD (Dispersión Alta). | |
| BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...Vea Mas BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. Vea Menos | Request Sample |
| BECKOCURE™ EH 2240/70MP | Allnex | BECKOCURE® EH 2240/70MP is an adduct hardener based on polyamines, thus free of volatile amines. In combination with suitable epoxy resins this hardener enables the formulation of high performing 2K high solids anticorrosion primers. | Request Sample |
| BECKOCURE™ EH 2260w/41WA | Allnex | Beckocure® EH 2260w/41WA es un endurecedor amino hidrófobo recomendado para la formulación de revestimientos metálicos de base acuosa, sin aminos básicos volátiles ni solventes. En combinación con dispersiones epoxi, se pueden formular imprimadores y mono...Vea Mas Beckocure® EH 2260w/41WA es un endurecedor amino hidrófobo recomendado para la formulación de revestimientos metálicos de base acuosa, sin aminos básicos volátiles ni solventes. En combinación con dispersiones epoxi, se pueden formular imprimadores y monocapas de secado rápido con una excelente protección contra la corrosión y muy buenas propiedades antiflacidez. Este producto tiene un comportamiento excelente y un rendimiento muy sólido incluso en superficies con preparación deficiente. Vea Menos | Request Sample |
| BECKOPOX™ E 04643 | Allnex | BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYL...Vea Mas BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF. Vea Menos | Request Sample |
| BECKOPOX™ E 04649 | Allnex | BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend...Vea Mas BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend powder coatings with gloss level of 20 – 35% produce outstanding smoothness at cure temperature as low as 130°C on MDF. Vea Menos | Request Sample |
| BECKOPOX™ E 04743 | Allnex | BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYL...Vea Mas BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF. Vea Menos | Request Sample |
| BECKOPOX™ EH 2162w/75WA | Allnex | BECKOPOX™ EH 2162w/75WA is an aliphatic polyamine adduct. It's also a hardener for water-reducible coatings on mineral and metallic substrates. | Request Sample |
| BECKOPOX™ EH 2189w/50WA | Allnex | Beckopox® EH 2189W/50WA es un endurecedor de amina altamente reactivo para revestimientos epoxi 2K a base de agua en sustratos metálicos. Se utiliza junto con dispersiones de resinas epoxi sólidas como por ejemplo, Beckopox® EP 384W. Los sistemas de reve...Vea Mas Beckopox® EH 2189W/50WA es un endurecedor de amina altamente reactivo para revestimientos epoxi 2K a base de agua en sustratos metálicos. Se utiliza junto con dispersiones de resinas epoxi sólidas como por ejemplo, Beckopox® EP 384W. Los sistemas de revestimiento de sustratos metálicos se pueden formular con una excelente resistencia a la humedad y la pulverización de sal. El uso de 70 a 80% de la cantidad estequiométrica de agente de curado ha dado mejores resultados. Vea Menos | Request Sample |
| BECKOPOX™ EH 623w/80WA | Allnex | Beckopox® EH 623W/80WA es un solvente a base de agua y agente de curado de epoxi poliamida sin ácido acético. Es un endurecedor para revestimientos reducibles con agua en sustratos minerales y metálicos, morteros epoxi hidráulicos (ECC). | Request Sample |
| BECKOPOX™ EH 694 | Allnex | BECKOPOX® EH 694 es un endurecedor anhídrido para usar con resinas epoxi sólidas, poliésteres OH-funcionales o como un agente de reticulación adicional para sistemas híbridos epoxi/poliéster para la fabricación de revestimientos en polvo. Las formulacione...Vea Mas BECKOPOX® EH 694 es un endurecedor anhídrido para usar con resinas epoxi sólidas, poliésteres OH-funcionales o como un agente de reticulación adicional para sistemas híbridos epoxi/poliéster para la fabricación de revestimientos en polvo. Las formulaciones a base de BECKOPOX® EH 694 presentan resistencia química y al sobrehorneado. Vea Menos | Request Sample |
| BECKOPOX™ VEH 2188w/55WA | Allnex | Un endurecedor hidrofóbico de amina especialmente para la formulación de revestimientos para metal, transmitidos por agua, libre de aminas básicas volátiles. | Request Sample |
| BECKOPOX™ VEH 2849w/80WA | Allnex | Una aducto alifático de poliamina, acético, libre de ácido, transmitido por agua; es un endurecedor altamente reactivo para revestimientos reducibles al agua en substratos metálicos minerales, donde es importante el curado rápido y la liberación de agua. | Request Sample |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® LMA 97SP es un monómero de metacrilato monofuncional hidrófobo con baja temperatura de transición vítrea (Tg). Es excelente paraa proporcionar flexibilidad cuando se utiliza como plastificante polimerizable. Los productos que contienen Bisomer® L...Vea Mas Bisomer® LMA 97SP es un monómero de metacrilato monofuncional hidrófobo con baja temperatura de transición vítrea (Tg). Es excelente paraa proporcionar flexibilidad cuando se utiliza como plastificante polimerizable. Los productos que contienen Bisomer® LMA 97SP presentan una reducida variación en las propiedades como viscosidad, humectación de pigmentos, resistencia química, adherencia, dureza y resistencia. Este producto es una materia prima clave para la síntesis de resinas acrílicas de alta calidad para una amplia gama de aplicaciones, incluidos revestimientos industriales, tintas de impresión y adhesivos sensibles a la presión. Vea Menos | |
| CERAFLOUR® 920 For Powder | BYK | Aditivo para mejorar la dureza de superficie de revestimientos UV en polvo. Polímero orgánico micronizado. | |
| CHS-Hardener P 11 | Spolchemie | CHS-Hardener P 11 is an amine hardener for epoxy resins. It is a universal type of hardener for CHS-Epoxy resins. The mixture is made up of polyalkylene polyamines and it contains mostly diethylenetriame. CHS-Hardener P 11 is primarily used as an additive...Vea Mas CHS-Hardener P 11 is an amine hardener for epoxy resins. It is a universal type of hardener for CHS-Epoxy resins. The mixture is made up of polyalkylene polyamines and it contains mostly diethylenetriame. CHS-Hardener P 11 is primarily used as an additive to epoxy resin systems to help them cure, it is also in the production of adhesives. Vea Menos | |
| DESMODUR® XP 2838 | Covestro | Desmodur® XP 2838 es utilizado principalmente como componente endurecedor para revestimientos de poliuretano de dos componentes resistentes a la luz, con alta resistencia a productos químicos y a la intemperie, muy buena retención de brillo y excelentes p...Vea Mas Desmodur® XP 2838 es utilizado principalmente como componente endurecedor para revestimientos de poliuretano de dos componentes resistentes a la luz, con alta resistencia a productos químicos y a la intemperie, muy buena retención de brillo y excelentes propiedades mecánicas. Los co-reactivos preferidos son polioles de poliéster o poliacrilato. Las aplicaciones principales para sistemas basados en Desmodur® XP 2838 son las de revestimientos de secado al aire y secado forzado para OEM de automóviles, reacabado de automóviles, transporte, acabado industrial y plásticos. Vea Menos | |
| DESMODUR® XP 2840 | Covestro | Desmodur® XP 2840 es un poliisocianato alifático basado en diisocianato de hexametileno. Est utilizado como componente endurecedor para sistemas de revestimientos con estabilidad climática y resistentes a la luz. Como un poliisocianato de muy baja viscosi...Vea Mas Desmodur® XP 2840 es un poliisocianato alifático basado en diisocianato de hexametileno. Est utilizado como componente endurecedor para sistemas de revestimientos con estabilidad climática y resistentes a la luz. Como un poliisocianato de muy baja viscosidad, Desmodur® XP 2840 es muy apropiado para la formulación de revestimientos con alto contenido en sólidos para el revestimiento industrial en general, reacabado de automóviles, transporte y aplicaciones de revestimientos de plásticos. Vea Menos | |
| Docure KC-305H | Kukdo Chemical Co., Ltd. | Docure KC-305H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...Vea Mas Docure KC-305H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. Vea Menos | |
| Docure KC-335H | Kukdo Chemical Co., Ltd. | Docure KC-335H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. this cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...Vea Mas Docure KC-335H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. this cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. Vea Menos | |
| Docure KH-505 | Kukdo Chemical Co., Ltd. | Docure KH-505 is an aliphatic amine modified hardener. KH-505 shows excellent curing ability in the condition of underwater and wet surfaces. It is well suited for the production of coatings and adhesives. | |
| Docure KH-506 | Kukdo Chemical Co., Ltd. | Docure KH-506 is an aliphatic amine modified mannich based hardener. KH-506 has good water spot resistance in the area of floorings. It is well suited for the production of solvent free coatings that are curable at low temperatures. | |
| Docure KH-531 | Kukdo Chemical Co., Ltd. | Docure KH-531 is an aliphatic amine modified hardener. KH-531 has low viscosity and the properties of light color and good color stability after curing. It is well suited for use in the production of solvent free coatings and other applications in the lam...Vea Mas Docure KH-531 is an aliphatic amine modified hardener. KH-531 has low viscosity and the properties of light color and good color stability after curing. It is well suited for use in the production of solvent free coatings and other applications in the laminating industries. Vea Menos | |
| Docure KH-550 | Kukdo Chemical Co., Ltd. | Docure KH-550 is an aliphatic amine modified hardener. KH-550 has low viscosity and solvent free. It could be accelerator for other curing agents and give thixotropies to resins, which is suitable to use on vertical surfaces. It is well suited for use in ...Vea Mas Docure KH-550 is an aliphatic amine modified hardener. KH-550 has low viscosity and solvent free. It could be accelerator for other curing agents and give thixotropies to resins, which is suitable to use on vertical surfaces. It is well suited for use in injection systems and the production of solvent free coatings. Vea Menos | |
| Docure KH-602 | Kukdo Chemical Co., Ltd. | Docure KH-602 is an aliphatic amine modified hardener. KH-602 can be used as solvent free system due to low viscosity. It can be used for Injection systems and resin mortars. In addition it is well suited for use as an accelerator for other curing agents. | |
| Docure KH-620 | Kukdo Chemical Co., Ltd. | Docure KH-620 is an aliphatic amine modified hardener. KH-620 can be used as solvent free system due to low viscosity. KH-620 gives excellent chemical resistance to organic solvents, particularly alcohols after curing. It is well suited for use in chemica...Vea Mas Docure KH-620 is an aliphatic amine modified hardener. KH-620 can be used as solvent free system due to low viscosity. KH-620 gives excellent chemical resistance to organic solvents, particularly alcohols after curing. It is well suited for use in chemical processing equipment, tank linings and maintenance coatings. Vea Menos | |
| Dodecanedioic Acid (DDA) | UBE Chemical Europe | Endurecedor para pinturas en polvo. Inoxidable para aceite de corte y aceite de molienda. Puede ser utilizado en polímeros, adhesivos, fragancias. | |
| Domide GX-328B75 | Kukdo Chemical Co., Ltd. | Domide GX-328B75 is a polyamide / epoxy adduct dissolved in n-Butanol for reaction with solid epoxy resins. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curi...Vea Mas Domide GX-328B75 is a polyamide / epoxy adduct dissolved in n-Butanol for reaction with solid epoxy resins. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. Vea Menos | |
| Domide GX-328K | Kukdo Chemical Co., Ltd. | Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation ...Vea Mas Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. Vea Menos | |
| Domide GX-422 | Kukdo Chemical Co., Ltd. | Domide GX-422 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-422 is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for fo...Vea Mas Domide GX-422 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-422 is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. Vea Menos | |
| Domide GX-450TI60 | Kukdo Chemical Co., Ltd. | Domide GX-450TI60 is a Polyamide / Epoxy adduct dissolved in Toluene/Iso-propanol for reaction with solid Epoxy Resins. GX-450TI60 is useful in maintenance coatings and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin. | |
| Domide GX-450XB70 | Kukdo Chemical Co., Ltd. | Domide GX-450XB70 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-450XB70 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin. | |
| Domide GX-460 | Kukdo Chemical Co., Ltd. | Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for for...Vea Mas Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for marine and industrial purposes. Vea Menos | |
| Domide GX-483 | Kukdo Chemical Co., Ltd. | Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formula...Vea Mas Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for industrial and marine purposes. Vea Menos | |
| Domide GX-533 | Kukdo Chemical Co., Ltd. | Domide GX-533 is a Polyamidoamine / Epoxy adduct designed for the product cured at room temperature in formulating for high performance coatings. In addition, it is well suited for use in the production of primers and maintenance coatings. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...Vea Mas DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. Vea Menos | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| Easaqua™ M 501 | Vencorex | Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance po...Vea Mas Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal and plastics. This product can also be used as a solvent-free hardener of ultra-low VOC mat clearcoats or semigloss pigmented paints. Vea Menos | |
| Easaqua™ M 502 | Vencorex | Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...Vea Mas Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. Vea Menos | |
| Easaqua™ WAT-3 | Vencorex | Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterb...Vea Mas Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterborne polyurethane leather finishing topcoats for automotive, upholstery and accessory leather products as well as 3D lamination applications in the automotive and furniture industries. Easaqua™ WAT-3 is also used as a crosslinker of waterborne adhesives for shows and wood to obtain D4 classification according to EN 204. Vea Menos | |
| Easaqua™ WAT-4 | Vencorex | Easaqua™ WAT-4 is a water-dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT. This product is used as a crosslinker of waterborne adhesive...Vea Mas Easaqua™ WAT-4 is a water-dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT. This product is used as a crosslinker of waterborne adhesives for shoes and wood to obtain D4 classification according to EN 204. It is also suggested as a hardener of two-pack waterborne polyurethane leather finishing topcoats for automotive, upholstery, and accessory leather products as well as for 3D lamination applications in the automotive and furniture industries. Vea Menos | |
| Easaqua™ X D 401 | Vencorex | Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyure...Vea Mas Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like wood, metal, and plastics. Vea Menos | |
| Easaqua™ X D 803 | Vencorex | Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of t...Vea Mas Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal, and plastics. Vea Menos | |
| Fujicure FXD-821 | Sanho Chemical Co., Ltd. | Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...Vea Mas Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. Vea Menos | |
| Fujicure FXK-832 | Sanho Chemical Co., Ltd. | Fujicure FXK-832 is a modified amine-type hardener in a light yellow-colored viscous liquid form. This product has a viscosity of 2000-5000 mPa.s and a specific gravity of 1.06. Fujicure FXK-832 is most commonly used in coating formulation applications. | |
| HS2266 | Tianyi Chemical Engineering Material Co., Ltd. | HS2266, in the form of a light yellow, viscous liquid, is a water-based epoxy hardening agent that can be used in thick and thinned self-leveling coatings, mortar flooring coatings, metal corrosion-resistant paint, and modified cement mortar coatings. Th...Vea Mas HS2266, in the form of a light yellow, viscous liquid, is a water-based epoxy hardening agent that can be used in thick and thinned self-leveling coatings, mortar flooring coatings, metal corrosion-resistant paint, and modified cement mortar coatings. This product has a pH value between 8.0 and 9.0. It has a density between 1.08 and 1.12 g/cm3. Vea Menos | |
| HS2288 | Tianyi Chemical Engineering Material Co., Ltd. | HS2288, in the form of a transparent, yellowish, viscous liquid, is an epoxy hardening agent that can be used in primers, surface coatings, and industrial coatings. This product has a pH value between 8.0 and 9.0. Its density is between 1.08 and 1.15 g/...Vea Mas HS2288, in the form of a transparent, yellowish, viscous liquid, is an epoxy hardening agent that can be used in primers, surface coatings, and industrial coatings. This product has a pH value between 8.0 and 9.0. Its density is between 1.08 and 1.15 g/cm3. Vea Menos | |
| Hydrorene 10 | S.A.P.I.C.I. SpA | Hydrorene 10 is a water-dispersible isocyanate. This product can be mixed with acrylic emulsions and polyurethane dispersion waterborne systems. It can be used as a hardener for 2K waterborne coatings with good chemical and abrasion resistance. | |
| Incozol EH | Incorez Ltd. | Incozol EH es un endurecedor latente de bis-oxazolidina de uretano, usado en revestimientos, pegamentos, sellantes y elastómeros del poliuretano 1K. Utilizado conjuntamente con un prepolímero bajo del poliuretano de NCO, este endurecedor acelera la curac...Vea Mas Incozol EH es un endurecedor latente de bis-oxazolidina de uretano, usado en revestimientos, pegamentos, sellantes y elastómeros del poliuretano 1K. Utilizado conjuntamente con un prepolímero bajo del poliuretano de NCO, este endurecedor acelera la curación de el prepolímero a través de un mecanismo accionado por humedad para permitir beneficios en la reticulación del uretano 1K. Vea Menos | |
| Kingcure 2040-MS | Sanho Chemical Co., Ltd. | Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...Vea Mas Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. Vea Menos | |
| Kingcure I-934 | Sanho Chemical Co., Ltd. | Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and ...Vea Mas Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and adhesive formulation applications. Vea Menos | |
| Kingcure K-863A | Sanho Chemical Co., Ltd. | Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...Vea Mas Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. Vea Menos | |
| Kingcure M-510 | Sanho Chemical Co., Ltd. | Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation appli...Vea Mas Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation applications. Vea Menos | |
| Kingcure X-2001 | Sanho Chemical Co., Ltd. | Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...Vea Mas Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. Vea Menos | |
| ORGANOSILICASOL™ DMAC-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ DMAC-ST es sílice coloidal monodispersa en el disolvente orgánico N,N-Dimetilacetamida. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras...Vea Mas El ORGANOSILICASOL™ DMAC-ST es sílice coloidal monodispersa en el disolvente orgánico N,N-Dimetilacetamida. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ EG-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ EG-ST es sílice coloidal monodispersa en el disolvente orgánico etilenglicol. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicacio...Vea Mas El ORGANOSILICASOL™ EG-ST es sílice coloidal monodispersa en el disolvente orgánico etilenglicol. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ IPA-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ IPA-ST es sílice coloidal monodisperso en el disolvente orgánico alcohol isopropílico con una partícula de 10 a15 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimient...Vea Mas El ORGANOSILICASOL™ IPA-ST es sílice coloidal monodisperso en el disolvente orgánico alcohol isopropílico con una partícula de 10 a15 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ IPA-ST-L | Nissan Chemical America Corporation | El ORGANOSILICASOL™ IPA-ST-L es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 40 a 50 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimi...Vea Mas El ORGANOSILICASOL™ IPA-ST-L es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 40 a 50 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ IPA-ST-UP | Nissan Chemical America Corporation | El ORGANOSILICASOL™ IPA-ST-UP es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 40 a 100 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revesti...Vea Mas El ORGANOSILICASOL™ IPA-ST-UP es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 40 a 100 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ IPA-ST-ZL | Nissan Chemical America Corporation | El ORGANOSILICASOL™ IPA-ST-ZL es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 70 a 100 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revesti...Vea Mas El ORGANOSILICASOL™ IPA-ST-ZL es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 70 a 100 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ MA-ST-MS | Nissan Chemical America Corporation | Sílice coloidal monodispersa en disolvente orgánico. Se utiliza para mejorar significativamente la resistencia al rayado, astillado y desgaste de plásticos, pinturas barnices y tintas. | Request Sample |
| ORGANOSILICASOL™ MEK-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ MEK-ST es sílice coloidal monodispersa en el disolvente orgánico metiletilcetona con un tamaño de partícula de 10 a 15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en...Vea Mas El ORGANOSILICASOL™ MEK-ST es sílice coloidal monodispersa en el disolvente orgánico metiletilcetona con un tamaño de partícula de 10 a 15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ MIBK-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ MIBK-ST es sílice coloidal monodispersa en el disolvente orgánico metil-isobutil-cetona con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimient...Vea Mas El ORGANOSILICASOL™ MIBK-ST es sílice coloidal monodispersa en el disolvente orgánico metil-isobutil-cetona con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ MT-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ MT-ST es sílice coloidal monodispersa en el disolvente orgánico alcohol metílico con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en p...Vea Mas El ORGANOSILICASOL™ MT-ST es sílice coloidal monodispersa en el disolvente orgánico alcohol metílico con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ NPC-ST-30 | Nissan Chemical America Corporation | El ORGANOSILICASOL™ NPC-ST-30 es sílice coloidal monodispersa en el disolvente orgánico etilenglicol mono-n-propil éter con un tamaño de partícula de 10 a 15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste d...Vea Mas El ORGANOSILICASOL™ NPC-ST-30 es sílice coloidal monodispersa en el disolvente orgánico etilenglicol mono-n-propil éter con un tamaño de partícula de 10 a 15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ PMA-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ PMA-ST es sílice coloidal monodispersa en el disolvente orgánico acetato del monometileter del propilenglicol con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y de...Vea Mas El ORGANOSILICASOL™ PMA-ST es sílice coloidal monodispersa en el disolvente orgánico acetato del monometileter del propilenglicol con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| SETA H 2959 | Allnex | SETA H 2959 is a latent co-reactant hardner for polyisocyanates in one-component polyurethane systems. The product contains blocked amino and hydroxyl groups, which are activated by atmospheric moisture. SETA H 2959 yields formulations, which cure at room...Vea Mas SETA H 2959 is a latent co-reactant hardner for polyisocyanates in one-component polyurethane systems. The product contains blocked amino and hydroxyl groups, which are activated by atmospheric moisture. SETA H 2959 yields formulations, which cure at room temperature to form homogeneous and blister-free films, even in high thicknesses. Vea Menos | Request Sample |
| SNOWTEX® IPA-ST-UP | Nissan Chemical America Corporation | SNOWTEX® IPA-ST-UP crea una serie de partículas alargadas. Comparadas con las partículas de sílice esféricas, las partículas alargadas de SNOWTEX® IPA-ST-UP ofrecen varias ventajas únicas. Se caracteriza por la excelente capacidad peliculígena, la buena a...Vea Mas SNOWTEX® IPA-ST-UP crea una serie de partículas alargadas. Comparadas con las partículas de sílice esféricas, las partículas alargadas de SNOWTEX® IPA-ST-UP ofrecen varias ventajas únicas. Se caracteriza por la excelente capacidad peliculígena, la buena adhesión, la buena migración y la alta viscosidad de <20 mPa•s. Este productos se estabiliza en IPA. Tiene aplicaciones como agente de revestimiento para papel, plásticos y metales, un aglutinante parar tratamientos refractarios, cerámicos, fibra de vidrio y textiles. Vea Menos | Request Sample |
| SNOWTEX® ST-20L | Nissan Chemical America Corporation | El SNOWTEX® ST-20L es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <3 mPa•s. Últimamente, se ha utilizado en la industria de semiconductores como agente pulidor para placas...Vea Mas El SNOWTEX® ST-20L es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <3 mPa•s. Últimamente, se ha utilizado en la industria de semiconductores como agente pulidor para placas de silicio. Otras aplicaciones del SNOWTEX® ST-20L incluyen un aglutinante catalizador, tratamiento textil, pulido, aglutinante para fundiciones, pinturas/revestimientos, tratamiento refractario, anticorrosivo y de superficies metálicas. Vea Menos | Request Sample |
| SNOWTEX® ST-40 | Nissan Chemical America Corporation | SNOWTEX® ST-40 es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. La viscosidad de este producto es de <25 mPa•s. Se aplica como aglutinante catalizador, tratamiento textil, pulidor, aglutinante para tratamientos ...Vea Mas SNOWTEX® ST-40 es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. La viscosidad de este producto es de <25 mPa•s. Se aplica como aglutinante catalizador, tratamiento textil, pulidor, aglutinante para tratamientos de superficies de fundición, de pintura/revestimiento, refractarias, anticorrosión y metálicas. Vea Menos | Request Sample |
| SNOWTEX® ST-50 | Nissan Chemical America Corporation | SNOWTEX® ST-50 es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <50 mPa•s. Se aplica como aglutinante catalizador, tratamiento textil, pulidor, aglutinante para tratamientos de superficie...Vea Mas SNOWTEX® ST-50 es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <50 mPa•s. Se aplica como aglutinante catalizador, tratamiento textil, pulidor, aglutinante para tratamientos de superficies de fundición, de pintura/revestimiento, refractarias, anticorrosión y metálicas. Vea Menos | Request Sample |
| SNOWTEX® ST-C | Nissan Chemical America Corporation | SNOWTEX® ST-C es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <10 mPa•s. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil, tratamiento de superficies metálicas...Vea Mas SNOWTEX® ST-C es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <10 mPa•s. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil, tratamiento de superficies metálicas, pintura, revestimiento, aglutinante para películas inorgánicas y tratamientos especiales del papel. Vea Menos | Request Sample |
| SNOWTEX® ST-N | Nissan Chemical America Corporation | SNOWTEX® ST-N es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <6 mPa•s. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil, tratamiento de superficies metálicas,...Vea Mas SNOWTEX® ST-N es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <6 mPa•s. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil, tratamiento de superficies metálicas, pintura, revestimiento, aglutinante para películas inorgánicas y tratamientos especiales del papel. Vea Menos | Request Sample |
| SNOWTEX® ST-O | Nissan Chemical America Corporation | SNOWTEX® ST-O es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <3 mPa•s con un tamaño de partícula de 2 a 4 µm. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil...Vea Mas SNOWTEX® ST-O es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <3 mPa•s con un tamaño de partícula de 2 a 4 µm. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil, tratamiento de superficies metálicas, pintura, revestimiento, aglutinante para películas inorgánicas y tratamiento especial del papel. Vea Menos | Request Sample |
| SNOWTEX® ST-O-UP | Nissan Chemical America Corporation | SNOWTEX® ST-O-UP es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <20 mPa•s y un tamaño de partícula de 40 a 100 µm. Se utiliza en aplicaciones como aglutinante catalizador,...Vea Mas SNOWTEX® ST-O-UP es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <20 mPa•s y un tamaño de partícula de 40 a 100 µm. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil, tratamiento de superficies metálicas, pintura, revestimiento, aglutinante para películas inorgánicas y tratamiento especial del papel. Vea Menos | Request Sample |
| SNOWTEX® ST-OL | Nissan Chemical America Corporation | SNOWTEX® ST-OL es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <3 mPa•s y un tamaño de partícula de 10 a 20 µm. Se utiliza en aplicaciones como aglutinante catalizador, tra...Vea Mas SNOWTEX® ST-OL es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <3 mPa•s y un tamaño de partícula de 10 a 20 µm. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil, tratamiento de superficies metálicas, pintura, revestimiento, aglutinante para películas inorgánicas y tratamiento especial del papel. Vea Menos | Request Sample |
| SNOWTEX® ST-PS-M | Nissan Chemical America Corporation | SNOWTEX® ST-PS-M es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. El ST-PS tiene una viscosidad de <100 mPa•s y se le llama “collar de perlas” por la forma de sus partículas. Se utiliza en aplicaciones como trat...Vea Mas SNOWTEX® ST-PS-M es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. El ST-PS tiene una viscosidad de <100 mPa•s y se le llama “collar de perlas” por la forma de sus partículas. Se utiliza en aplicaciones como tratamiento de superficies de plástico/metal, aglutinante para catalizadores, modificador de pinturas o agentes de revestimiento, agente aglutinante y de fundición. Vea Menos | Request Sample |
| SNOWTEX® ST-PS-MO | Nissan Chemical America Corporation | SNOWTEX® ST-PS-MO es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto se destaca por su forma de perla, el excelente recubrimiento, buena adhesión, gran porosidad y alta viscosidad. Se utiliza en apli...Vea Mas SNOWTEX® ST-PS-MO es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto se destaca por su forma de perla, el excelente recubrimiento, buena adhesión, gran porosidad y alta viscosidad. Se utiliza en aplicaciones como tratamiento de superficies de plástico/metal, aglutinante para catalizadores, modificador de pinturas o agentes de revestimiento, agente aglutinante y de fundición. Vea Menos | Request Sample |
| SNOWTEX® ST-PS-S | Nissan Chemical America Corporation | SNOWTEX® ST-PS-S es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <100 mPa•s y un tamaño de partícula de 10 a 15/80 a 150 µm. Se utiliza en aplicaciones como tratamiento de ...Vea Mas SNOWTEX® ST-PS-S es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <100 mPa•s y un tamaño de partícula de 10 a 15/80 a 150 µm. Se utiliza en aplicaciones como tratamiento de superficies de plástico/metal, aglutinante para catalizadores, modificador de pinturas o agentes de revestimiento, agente aglutinante y de fundición. Vea Menos | Request Sample |
| SNOWTEX® ST-PS-SO | Nissan Chemical America Corporation | SNOWTEX® ST-PS-SO es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <100 mPa•s y un tamaño de partícula de 80 a 150 µm. Se utiliza en aplicaciones como tratamiento de superfi...Vea Mas SNOWTEX® ST-PS-SO es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <100 mPa•s y un tamaño de partícula de 80 a 150 µm. Se utiliza en aplicaciones como tratamiento de superficies de plástico/metal, aglutinante para catalizadores, modificador de pinturas o agentes de revestimiento, agente aglutinante y de fundición. Vea Menos | Request Sample |
| SNOWTEX® ST-UP | Nissan Chemical America Corporation | SNOWTEX® ST-UP es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <100 mPa•s y un tamaño de partícula de 9 a 15/40 a 100 µm. Tiene aplicaciones como agente de revestimiento pa...Vea Mas SNOWTEX® ST-UP es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <100 mPa•s y un tamaño de partícula de 9 a 15/40 a 100 µm. Tiene aplicaciones como agente de revestimiento para papel, plásticos y metales, un aglutinante parar tratamientos refractarios, cerámicos, fibra de vidrio y textiles. Vea Menos | Request Sample |
| SNOWTEX® ST-ZL | Nissan Chemical America Corporation | SNOWTEX® ST-ZL es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. El tamaño de la partícula de este producto es de 90 µm. | Request Sample |
| SYNTHACRYL® 700 | Allnex | SYNTHACRYL® 700 es una resina poliacrílica glicidilo funcional diseñada como endurecedor de resinas de poliéster carboxilado. Los revestimientos a base de poliésteres carboxílicos tales como CRYLCOAT® 2441-2, curados con SYNTHACRYL® 700, producen acabados...Vea Mas SYNTHACRYL® 700 es una resina poliacrílica glicidilo funcional diseñada como endurecedor de resinas de poliéster carboxilado. Los revestimientos a base de poliésteres carboxílicos tales como CRYLCOAT® 2441-2, curados con SYNTHACRYL® 700, producen acabados mate extraordinariamente uniformes. Vea Menos | Request Sample |
| SYNTHACRYL® 710 | Allnex | SYNTHACRYL® 710 is a glycidyl functional polyacrylic resin designed as matting hardener for carboxyl functional polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2630-2 cured with SYNTHACRYL® 710 and Primid® XL 552 produce outsta...Vea Mas SYNTHACRYL® 710 is a glycidyl functional polyacrylic resin designed as matting hardener for carboxyl functional polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2630-2 cured with SYNTHACRYL® 710 and Primid® XL 552 produce outstandingly smooth, dead matte finishes. Vea Menos | Request Sample |
| Telalit 0309 | Spolchemie | Telalit 0309 is a yellow-green colored amine hardener for epoxy resins. It is a hardener for epoxy resins it is made from aliphatic polyamines with added accelerators for being able to cure at lower temperatures. This product is primarily used as a harden...Vea Mas Telalit 0309 is a yellow-green colored amine hardener for epoxy resins. It is a hardener for epoxy resins it is made from aliphatic polyamines with added accelerators for being able to cure at lower temperatures. This product is primarily used as a hardener with a wide range of uses it is designed for temperatures of +10 - +20 °C. Vea Menos | |
| Telalit 0420 | Spolchemie | Telalit 0420 is a yellow-brown colored amine hardener for epoxy resins. This product is modified by cycloaliphatic polyamine compound. Telalit 0420 is used as a hardener for heavy-duty laminating systems and also in civil and electrical engineering applic...Vea Mas Telalit 0420 is a yellow-brown colored amine hardener for epoxy resins. This product is modified by cycloaliphatic polyamine compound. Telalit 0420 is used as a hardener for heavy-duty laminating systems and also in civil and electrical engineering applications. It is designed to be able to be applied at room temperature. Vea Menos | |
| Telalit 0430 | Spolchemie | Telalit 0430 is a yellow-brown colored amine hardener for epoxy resins. This product is modified by cycloaliphatic polyamine compound. Telalit 0430 is used as a hardener for short processing time solvent-free and solid coatings. It is used in civil engine...Vea Mas Telalit 0430 is a yellow-brown colored amine hardener for epoxy resins. This product is modified by cycloaliphatic polyamine compound. Telalit 0430 is used as a hardener for short processing time solvent-free and solid coatings. It is used in civil engineering applications. It is designed to be able to be applied at room temperature. Vea Menos | |
| Telalit 0492 | Spolchemie | Telalit 0492 is a yellow-brown colored amine hardener for epoxy resin systems. This product is an additive to a mixture of amine hardeners with medium pot life at room temperatures. Telalit 0492 is primarily used in curing of epoxy resins in civil enginee...Vea Mas Telalit 0492 is a yellow-brown colored amine hardener for epoxy resin systems. This product is an additive to a mixture of amine hardeners with medium pot life at room temperatures. Telalit 0492 is primarily used in curing of epoxy resins in civil engineering applications. It is also used in the manufacturing of adhesives. Vea Menos | |
| Telalit 0500 | Spolchemie | Telalit 0500 is a yellow-brown colored amine hardener for epoxy resins. This product is modified by cycloaliphatic polyamine compound. Telalit 0500 is used as a hardener for short processing time and solvent-free and high solid coating and sealing systems...Vea Mas Telalit 0500 is a yellow-brown colored amine hardener for epoxy resins. This product is modified by cycloaliphatic polyamine compound. Telalit 0500 is used as a hardener for short processing time and solvent-free and high solid coating and sealing systems. Vea Menos | |
| Telalit 0590 | Spolchemie | Telalit 0590 is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by polyether polyamines. Telalit 0590 is primarily used as a curing agent to produce a hardener that provides wet fillers and fibers. This product is u...Vea Mas Telalit 0590 is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by polyether polyamines. Telalit 0590 is primarily used as a curing agent to produce a hardener that provides wet fillers and fibers. This product is used on composite materials and can be used in RTM/RIM applications. Vea Menos | |
| Telalit 0600 | Spolchemie | Telalit 0600 is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine with extended pot-life. It has a low exothermic effect while processing. Telalit 0600 is used for curing in epoxy resin system...Vea Mas Telalit 0600 is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine with extended pot-life. It has a low exothermic effect while processing. Telalit 0600 is used for curing in epoxy resin systems and is intended mainly for producing adhesives and as a coating to improve surface reinforcement as well as surface wetting. Vea Menos | |
| Telalit 0903 | Spolchemie | Telalit 0903 is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine and has a low molecular weight. This hardener does not contain nonyl-phenol. Telalit 0903 is primarily used for hardening epox...Vea Mas Telalit 0903 is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine and has a low molecular weight. This hardener does not contain nonyl-phenol. Telalit 0903 is primarily used for hardening epoxy systems for construction and composites and is designed to cure at room temperature. Vea Menos | |
| Telalit 1040 | Spolchemie | Telalit 1040 is an amine hardener for epoxy resin systems. This product is a hardener that is modified from a mixture of primary poly-etherpolyamines. This hardener does not contain nonyl-phenol. Telalit 1040 is primarily used as a hardener for water-base...Vea Mas Telalit 1040 is an amine hardener for epoxy resin systems. This product is a hardener that is modified from a mixture of primary poly-etherpolyamines. This hardener does not contain nonyl-phenol. Telalit 1040 is primarily used as a hardener for water-based systems and in high-solid coatings. Vea Menos | |
| Telalit 1203 NF | Spolchemie | Telalit 1203 NF is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine and has a low molecular weight. This hardener does not contain nonyl-phenol. Telalit 1203 NF is primarily used in solvent-f...Vea Mas Telalit 1203 NF is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine and has a low molecular weight. This hardener does not contain nonyl-phenol. Telalit 1203 NF is primarily used in solvent-free epoxy systems and high-solid coatings with low yellowing. Vea Menos | |
| Telalit 160 | Spolchemie | Telalit 160 is a yellow-brown amine hardener for epoxy resin systems. This product is modified by poly-alkyl-enepolyamine and has a medium molecular weight. Telalit 160 is primarily used as a hardener for two-component epoxy coating systems. | |
| Telalit 180 | Spolchemie | Telalit 180 is a transparent yellow-brown amine hardener for epoxy resin systems. This product is a modified aqueous epoxy solution with mixture of amine with medium viscosity. Telalit 180 is primarily used as a curing additive in waterborne epoxy dispers...Vea Mas Telalit 180 is a transparent yellow-brown amine hardener for epoxy resin systems. This product is a modified aqueous epoxy solution with mixture of amine with medium viscosity. Telalit 180 is primarily used as a curing additive in waterborne epoxy dispersion. Vea Menos | |
| Telalit 3404 X 70 | Spolchemie | Telalit 3404 X 70 is a yellow-brown amine hardener for epoxy resin systems. This product is 70% xylene solution of poly-amino-amide with a flashpoint of 31 °C. This amine hardener is modified by dimer and monomeric fatty acids and aliphatic poly-amines. T...Vea Mas Telalit 3404 X 70 is a yellow-brown amine hardener for epoxy resin systems. This product is 70% xylene solution of poly-amino-amide with a flashpoint of 31 °C. This amine hardener is modified by dimer and monomeric fatty acids and aliphatic poly-amines. Telalit 3404 X 70 is primarily used in the formulation of two-component anti-corrosive epoxy coatings. Vea Menos |
