| Ammonium Polyphosphate(APP) | Shifang Changfeng Chemical Co., Ltd. | Ammonium Polyphosphate (APP) is a highly efficient, nontoxic inorganic flame retardant. This product has a low water solubility, and a high phosphorus and nitrogen content. Ammonium Polyphosphate (APP) is most commonly used as a flameproof coating for mul...Vea Mas Ammonium Polyphosphate (APP) is a highly efficient, nontoxic inorganic flame retardant. This product has a low water solubility, and a high phosphorus and nitrogen content. Ammonium Polyphosphate (APP) is most commonly used as a flameproof coating for multistory buildings, ships, trains, and cable applications. Vea Menos | |
| Ammonium Polyphosphate(Phase II) | Shifang Changfeng Chemical Co., Ltd. | Ammonium Polyphosphate(Phase II) is a non halogen flame retardant. This product decomposes to a polymeric acid and ammonia when exposed to fire or heat. Ammonium Polyphosphate(Phase II) is most commonly used in plastics (PP, PVC, and PE), polyesters, rubb...Vea Mas Ammonium Polyphosphate(Phase II) is a non halogen flame retardant. This product decomposes to a polymeric acid and ammonia when exposed to fire or heat. Ammonium Polyphosphate(Phase II) is most commonly used in plastics (PP, PVC, and PE), polyesters, rubber, and expandable fireproof coating. Vea Menos | |
| Ammonium Polyphosphate(phase-II) treated by epoxy resin | Shifang Changfeng Chemical Co., Ltd. | Ammonium Polyphosphate(phase-II) treated by epoxy resin solubility in water is very low and has less influence in polymers. This product is most commonly used in epoxy resin, polyurethane, and textile coating applications. | |
| CF-APP203 Silane Modified APP | Shifang Changfeng Chemical Co., Ltd. | CF-APP203 Silane Modified APP is flame retardant based on phosphorus /nitrogen synergism. This product is has a lower solubility in water and viscosity. CF-APP203 Silane Modified APP is most commonly used in fiber, polymer, plastics, and fire-refractory b...Vea Mas CF-APP203 Silane Modified APP is flame retardant based on phosphorus /nitrogen synergism. This product is has a lower solubility in water and viscosity. CF-APP203 Silane Modified APP is most commonly used in fiber, polymer, plastics, and fire-refractory building board applications. Vea Menos | |
| Exolit® AP 420 | Clariant Plastics & Coatings Ltd. | Exolit® AP 420 is an approx. 45 % clear to cloudy aqueous solution of a short-chain ammonium polyphosphate. | |
| Exolit® AP 422 | Clariant Plastics & Coatings Ltd. | Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. | |
| Exolit® AP 423 | Clariant Plastics & Coatings Ltd. | Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and ...Vea Mas Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable. Vea Menos | |
| Exolit® AP 462 | Clariant Plastics & Coatings Ltd. | Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-parti...Vea Mas Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non-hygroscopic and non-flammable. Vea Menos | |
| Exolit® AP 740 | Clariant Plastics & Coatings Ltd. | Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlor...Vea Mas Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. Vea Menos | |
| Exolit® AP 740 F | Clariant Plastics & Coatings Ltd. | Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from c...Vea Mas Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. Vea Menos | |
| Exolit® AP 750 | Clariant Plastics & Coatings Ltd. | Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability....Vea Mas Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest. Vea Menos | |
| Exolit® IFR 36 | Clariant Plastics & Coatings Ltd. | Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants...Vea Mas Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat insulating effect and reduces further oxygen access. Vea Menos | |
| Melamine Modified APP-II (CF-APP202) | Shifang Changfeng Chemical Co., Ltd. | Melamine Modified APP-II (CF-APP202) is a flame retardant. This product is based on phosphorus /nitrogen synergism, free formaldehyde,manufactured from CF-APP201. Melamine Modified APP-II (CF-APP202) is most commonly used in plastics(PP, PVC, and PE), pol...Vea Mas Melamine Modified APP-II (CF-APP202) is a flame retardant. This product is based on phosphorus /nitrogen synergism, free formaldehyde,manufactured from CF-APP201. Melamine Modified APP-II (CF-APP202) is most commonly used in plastics(PP, PVC, and PE), polyester, rubber, and expandable fireproof coating applications. Vea Menos | |
| Phos-Chek® P/42 | ICL Phosphate Specialty | Phos-Chek® P/42 is a white powder, free of visible foreign matter used as a fire retardant additive. It is composed of Ammonium polyphosphate (APP) CAS NO. 68333-79-9. Phos-Chek® is an effective fire retardant additive for applications such as: intumescent...Vea Mas Phos-Chek® P/42 is a white powder, free of visible foreign matter used as a fire retardant additive. It is composed of Ammonium polyphosphate (APP) CAS NO. 68333-79-9. Phos-Chek® is an effective fire retardant additive for applications such as: intumescent paints and coatings, both water-based and solvent-based. It can also be applied to intumescent mastics, caulks, putties, sealants, epoxies, films and adhesives, as well as polymer systems, including those based on polyethylene, polypropylene, polyurethane, rubber, acrylics and polyterephthalates. Building materials such as wall coverings, ceiling tiles, roofing products, wall panels, wood chip board and composites can also be used with the application of Phos-Chek® P/42. Vea Menos | Request Sample |
| TCEP Flame Retardant | Yangzhou Chenhua New Material CO., LTD. | TCEP Flame Retardant is a colorless to yellowish transparent liquid with a molecular weight of 285.5. This product has a specific gravity between 1.41 and 1.43 and a flash point greater than 200 degrees Celsius. TCEP Flame Retardant imparts flame retardan...Vea Mas TCEP Flame Retardant is a colorless to yellowish transparent liquid with a molecular weight of 285.5. This product has a specific gravity between 1.41 and 1.43 and a flash point greater than 200 degrees Celsius. TCEP Flame Retardant imparts flame retardant properties as a nitrocellulose varnish additive due to its plasticization. Vea Menos | |
| TCPP Flame Retardant | Yangzhou Chenhua New Material CO., LTD. | TCPP Flame Retardant is a colorless to yellowish, oily liquid with a molecular weight of 327.56. This product has an aquatic solubility of 1.6g/l at 20 degrees Celsius and is insoluble in aliphatic hydrocarbons. This product acts as a flame retardant in c...Vea Mas TCPP Flame Retardant is a colorless to yellowish, oily liquid with a molecular weight of 327.56. This product has an aquatic solubility of 1.6g/l at 20 degrees Celsius and is insoluble in aliphatic hydrocarbons. This product acts as a flame retardant in coatings. Vea Menos |
