| HALOX® 550 WF | ICL Phosphate Specialty | HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-...Vea Mas HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. It is suitable for low pH and acid-catalyzed systems. The dosage level is 0.5-3.0% based on the total formula weight. HALOX® 550 WF has a shelf life of 12 months. Vea Menos | Request Sample |
| HALOX® 570 | ICL Phosphate Specialty | HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phos...Vea Mas HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primers and direct-to-metal topcoats and has minimal effect on gloss reduction. HALOX® 570 can be used in formulations based on water-based acrylic latexes and co-polymers, styrene/acrylic latexes, acrylated epoxy esters, thin films, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2 pack polyurethane. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® 570 LS | ICL Phosphate Specialty | HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. I...Vea Mas HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. It is environmentally friendly, nitrite-, phosphate- & heavy metal-free, and can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS can be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. It is suitable for primers and direct-to-metal topcoats. It has minimal effect on gloss reduction. Recommended dosage level is 1-3% based on total formula weight. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® 630 | ICL Phosphate Specialty | HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in s...Vea Mas HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high solids epoxy esters, alkyds, acrylic resins, silicones, polyesters, and 2-pack polyurethane primers. It is recommended for auto refinish, OEM, DTM, industrial and marine coatings. HALOX® 630 shows superior corrosion resistance over poorly prepared surfaces, such as adherent rust or oil contamination. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® 650 | ICL Phosphate Specialty | HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion perf...Vea Mas HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is primarily designed for coatings and primers on metal surfaces. It can be used in applications such as coil coatings resins such as thermoplastic acrylics or epoxies, powder coatings systems such as polyester/TGIC, acid catalyzed thermosetting systems such as melamine or urea formaldehyde, and wash (etch) primers based on PVB. It is suitable for solvent-based polyurethanes, short-, medium- & long oil alkyds, and silicones. It is also suitable for clear coats, thin films, and aerospace coating. The dosage level of the grade is 1-3% based on total formulation solids. HALOX® 650 has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® 700 | ICL Phosphate Specialty | HALOX® 700 by ICL is a white, non-refractive, zinc & aluminum phosphate-based corrosion-inhibiting pigment for protective coatings. It is designed to provide coatings with early and long-term corrosion protection. It is recommended for solvent- and water-...Vea Mas HALOX® 700 by ICL is a white, non-refractive, zinc & aluminum phosphate-based corrosion-inhibiting pigment for protective coatings. It is designed to provide coatings with early and long-term corrosion protection. It is recommended for solvent- and water-based epoxy and urethane coatings. It is suitable for alkyd and acrylic coatings. It can be used in combination with HALOX® 700. The dosage level of HALOX® 700 is 5-12% based on total formula weight. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® BW-111 | ICL Phosphate Specialty | HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent...Vea Mas HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent-based epoxy systems, both conventional and high solids. The dosage level is 5-10% based on total formula weight for conventional systems and 10-20% based on total formula weight in higher solids systems. HALOX® BW-111 has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® BW-191 | ICL Phosphate Specialty | HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solven...Vea Mas HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solvent-based and waterborne systems such as latexes and water reducible due to its lower oil absorption. HALOX® BW-191 can also be effective in anti-corrosive high solids coatings. The dosage level of the grade is 5-10% based on the total formula weight. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® CW-22/221 | ICL Phosphate Specialty | HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd ...Vea Mas HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer systems based on traditional solvent alkyd technology. Recommended dosage level is 9-15% based on total formula weight with PVC level in the range of 42-47%. It has a shelf life of 36 months. HALOX® CW-22/221 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 1, Class A. Vea Menos | Request Sample |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in ...Vea Mas HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. Vea Menos | Request Sample |
| HALOX® CW-291 | ICL Phosphate Specialty | HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alk...Vea Mas HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat & DTM finishes. It has a shelf life of 36 months. It is compliant with ASTM D4288-83, specification for calcium borosilicate pigment type 1, Class B. Vea Menos | Request Sample |
| HALOX® CW-314 | ICL Phosphate Specialty | HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivit...Vea Mas HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It increases the total solar reflectance (TSR) while maintaining the dirt pick-up resistance (DPUR) and prevention mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints. HALOX® CW-314 is especially suited for systems where 21 CFR 175.300 approval or conformance to ANSI/NSF standards is required. It is also used in potable water tank linings and pipe coatings. The dosage level for potable water tank linings & pipe coatings is 3-8% based on total formula weight and 10-30% for elastomeric roof coatings containing calcium carbonate & titanium dioxide. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® CW-491 | ICL Phosphate Specialty | HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long o...Vea Mas HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primers, direct-to-metal finishes, 2k solvent-based epoxies, water-reducible alkyds, acrylics, polyvinyl chloride resins, and polyesters. HALOX® CW-491 is a white, non-refractive, zinc-, & heavy metal-free grade that is used for protective coating systems. The dosage level of the grade is 5-8% based on the total formula weight for water-based systems and 7-12% based on the total formula weight for solvent-based systems. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® FLASH-X® 150 | ICL Phosphate Specialty | HALOX® FLASH-X® 150 by ICL is a liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting in lined and unlined metal containers. It is highly effective at relatively low loading levels...Vea Mas HALOX® FLASH-X® 150 by ICL is a liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting in lined and unlined metal containers. It is highly effective at relatively low loading levels as compared to other flash and in-can rust inhibitors. It is a low-viscosity liquid which is ideal for increasing production output. It exhibits excellent flash rust inhibitive performance on various metal substrates ranging from iron, steel, and galvanized iron to galvalume and zincalume. It is compatible with a variety of latices without causing film sensitivity or package stability problems. It can stabilize metal substrates when using the water-blasting method of surface restoration. It is easy to use and can be incorporated at any stage of coating manufacture. HALOX® FLASH-X® 150 can also be easily and effectively post-added to any coating system. The dosage level is 0.25-1% for flash rusting, 0.50-1.5% for in-can rusting, and 1.50-3% for water blasting. It has a shelf life of 24 months. Vea Menos | Request Sample |
| HALOX® FLASH-X® 330 | ICL Phosphate Specialty | HALOX® FLASH-X® 330 by ICL is an effective, nitrite-free, low odor, liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting for unlined metal containers. It is recommended for high g...Vea Mas HALOX® FLASH-X® 330 by ICL is an effective, nitrite-free, low odor, liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting for unlined metal containers. It is recommended for high gloss systems and does not detract from gloss. It is added to water jet-blasting solutions to provide temporary protection prior to applying the protective coating. HALOX® FLASH-X® 330 is easy to use and can be incorporated at any stage of coating manufacture. It can also be easily and effectively post-added to any coating system. The dosage level for flash-rusting application is 0.5-2% and for in-can rusting is 1.5-2.5%. It has a shelf life of 24 months. Vea Menos | Request Sample |
| HALOX® RC-980 | ICL Phosphate Specialty | HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It i...Vea Mas HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It is suitable for medium oil alkyds, cationic 1K epoxies, and cationic 1K acrylics. It can be used in slightly acidic waterborne vinyl or PVDC binders applied to rusted steel substrates. It shows a stable freeze cycle. It does not contain tannic acid, oxime chelates, phosphates, or phosphoric acid. The dosage level is 3-6% for water-based coatings and 7-10% for solvent-based coatings as supplied on total formula weight. The shelf life of HALOX® RC-980 is 1 year. Vea Menos | Request Sample |
| HALOX® SW-111 | ICL Phosphate Specialty | HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It ma...Vea Mas HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It maintains a higher level of in-can stability. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, polyurethane dispersions, and acrylics. The dosage level is 5-10% based on the total formula weight. Synergistic properties have been found [in the areas of corrosion and humidity resistance] when HALOX® SW-111 is used in combination with HALOX® Zinc phosphate [1:1 ratio] in some waterborne systems. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® SZP-391 | ICL Phosphate Specialty | HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-base...Vea Mas HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resins, latexes, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-391 make it the pigment of choice in thin film applications (<1 mil or 25 microns). The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the s...Vea Mas HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® SZP-395 | ICL Phosphate Specialty | HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety ...Vea Mas HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety of resin systems such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin-film applications (<1 mil or 25 μm). The dosage level is 2-5% for water-based systems and 3-7% for solvent-based coatings based on total formula weight. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® XTAIN® L-44 | ICL Phosphate Specialty | HALOX® XTAIN® L-44 by ICL is a very effective liquid tannin stain-blocking additive. It is barium & antimony-free ammonium stabilized zirconium salt. It provides high performance and good compatibility with most water-based coating systems. It can replace...Vea Mas HALOX® XTAIN® L-44 by ICL is a very effective liquid tannin stain-blocking additive. It is barium & antimony-free ammonium stabilized zirconium salt. It provides high performance and good compatibility with most water-based coating systems. It can replace zinc oxide. It is easy to post-add to a coating (1:1 with water). It eliminates the need for zinc oxide without sacrificing performance and provides improved package stability. The dosage level of HALOX® XTAIN® L-44 is 1-3% TFW. It has a shelf life of 24 months. Vea Menos | Request Sample |
| HALOX® Z-Plex 111 | ICL Phosphate Specialty | HALOX® Z-PLEX 111 by ICL is a highly versatile and economical corrosion-inhibiting pigment. It is a zinc phosphate complex designed to compete head-to-head with standard zinc phosphate pigments. It is a white, non-refractive grade used in protective coati...Vea Mas HALOX® Z-PLEX 111 by ICL is a highly versatile and economical corrosion-inhibiting pigment. It is a zinc phosphate complex designed to compete head-to-head with standard zinc phosphate pigments. It is a white, non-refractive grade used in protective coating systems. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyds, and water-based epoxies, polyurethanes, and polyurethane dispersions. HALOX® Z-PLEX 111 has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® Z-Plex 250 | ICL Phosphate Specialty | HALOX® Z-PLEX 250 by ICL is a white, non-refractive, corrosion-inhibiting pigment. It is an alternative to lead & chrome inorganic corrosion inhibitors. It is type I, zinc phosphate di-hydrate. It is designed for powder coatings & protective coatings. It ...Vea Mas HALOX® Z-PLEX 250 by ICL is a white, non-refractive, corrosion-inhibiting pigment. It is an alternative to lead & chrome inorganic corrosion inhibitors. It is type I, zinc phosphate di-hydrate. It is designed for powder coatings & protective coatings. It shows a high degree of versatility due to its narrow particle size distribution. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 250 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. Recommended dosage level is 5-10% based on total formula weight. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® Z-PLEX 750 | ICL Phosphate Specialty | HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced perfor...Vea Mas HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primers on metal surfaces to cost-effectively provide the traditional function of an inorganic corrosion inhibitor with the benefits of an organic corrosion inhibitor. It possesses excellent passivation, outstanding blister resistance, and enhanced barrier properties. Recommended dosage level is 3-7% based on total formulation weight. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® Zinc Phosphate | ICL Phosphate Specialty | HALOX® Zinc Phosphate by ICL is a universal lead-free and chromium-free inorganic corrosion inhibitor. It is designed for water-based- and solvent-based coatings. It is a white, non-refractive grade used in protective coating systems. It is generically id...Vea Mas HALOX® Zinc Phosphate by ICL is a universal lead-free and chromium-free inorganic corrosion inhibitor. It is designed for water-based- and solvent-based coatings. It is a white, non-refractive grade used in protective coating systems. It is generically identified as zinc phosphate-dihydrate. It exhibits a narrow particle size distribution. It has a high degree of versatility. HALOX® Zinc Phosphate is recommended for most high-performance resin systems such as vinyl, chlorinated rubbers, and epoxies. It is also used in high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. It is also recommended for thin-film applications (1 mil or 25 microns). It is compliant with ASTM D6280-98 specification for zinc phosphate pigment type I. The dosage level is 5-15% based on the total formula weight. It has a shelf life of 36 months. Vea Menos | Request Sample |
| High Performance High Chlorinated Polyethylene-YURON HPE 1505 | Yuron New Material | YURON HPE1505 es un polietileno altamente clorado de alto rendimiento. Se suministra como un polvo blanco y es inmiscible en agua. Este producto se utiliza principalmente para promover la resistencia al desgaste, a la corrosión, y para producir revestimie...Vea Mas YURON HPE1505 es un polietileno altamente clorado de alto rendimiento. Se suministra como un polvo blanco y es inmiscible en agua. Este producto se utiliza principalmente para promover la resistencia al desgaste, a la corrosión, y para producir revestimientos autoextinguibles y tintas de impresión de alta calidad. Vea Menos | |
| Hordaphos® 124 | Clariant Plastics & Coatings Ltd. | Hordaphos® 124 is a yellowish to brown liquid with an ester-like odour. Solid particles may be precipitated at low temperatures but this process is reversible on warming. Hordaphos® 124 is soluble in common organic solvents such as aliphatic and aromatic ...Vea Mas Hordaphos® 124 is a yellowish to brown liquid with an ester-like odour. Solid particles may be precipitated at low temperatures but this process is reversible on warming. Hordaphos® 124 is soluble in common organic solvents such as aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, esters and ketones. It can be emulsified with water. Vea Menos | |
| HS972 | Tianyi Chemical Engineering Material Co., Ltd. | HS972, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...Vea Mas HS972, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 3.7 and 4.5. Vea Menos | |
| HS974 | Tianyi Chemical Engineering Material Co., Ltd. | HS974, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...Vea Mas HS974, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 5.5 and 8.0. Vea Menos | |
| HS976 | Tianyi Chemical Engineering Material Co., Ltd. | HS976, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...Vea Mas HS976, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 5.5 and 8.0. Vea Menos | |
| Jetfil® P350 | Imerys Performance Additives | Talco laminar de alta Poliuretano reza, usado en revestimientos, adhesivos y formulaciones del sellante para mejorar las propiedades de la resistencia a la tracción, de flexibilidad y de barrera, de las películas curadas. | |
| LOPON® DV | ICL Phosphate Specialty | LOPON® DV is a corrosion inhibitor for emulsion paints, premium plasters and other aqueous building paints. For binding iron ions the recommended dosage is 5.0 – 7.5 mg LOPON® DV per mg iron. It is a disodium phosphate. | Request Sample |
| Mistron® 353 | Imerys Performance Additives | De De Poliuretano reza elevada, talco láminas usado en poliolefinas para aumentar la rigidez y para elevar la temperatura de desviación de calor (HDT). | |
| Mistron® 403 | Imerys Performance Additives | Un talco ultrafino, micronizado que aumenta perceptiblemente el poder cubriente. Jetfine® 1A tiene un corte superior de 5μm y una partícula de tamaño mediano de 1μm. | |
| Mistron® 554 | Imerys Performance Additives | De De Poliuretano reza elevada, talco laminar que mejora la durabilidad exterior y las propiedades de barrera en revestimientos base de arquitectura, acabados, pinturas de tráfico, pinturas de textura, y los comPoliuretano estos de comPoliuretano estos. | |
| Mistron® Monomix | Imerys Performance Additives | De De Poliuretano reza elevada, talco laminar que mejora la resistencia y flexibilidad de la película en formulaciones de selladores y proporciona propiedades de barrera en revestimientos base arquitectónicos e industriales, para mejorar resistencia a la...Vea Mas De De Poliuretano reza elevada, talco laminar que mejora la resistencia y flexibilidad de la película en formulaciones de selladores y proporciona propiedades de barrera en revestimientos base arquitectónicos e industriales, para mejorar resistencia a la corrosión y capacidad de bloqueo de manchas. Vea Menos | |
| Mistron® RCS | Imerys Performance Additives | Talco laminar de alta Poliuretano reza que mejora las propiedades de barrera, la resistencia a la corrosión y la mancha capacidad de bloqueo de manchas en revestimientos base arquitecturales e industriales. | |
| Mistron® Ultramix | Imerys Performance Additives | Combina alta Poliuretano reza de talco, morfología del tipo carbonato y buen control de tamaño alto. Proporciona resistencia al fregado comparable comen y carbonato dos y seca bien en la Texas o en sistemas basados en solvente. | |
| Mistron® Vapor R | Imerys Performance Additives | Talco laminar de De Poliuretano reza elevada que mejora las propiedades de barrera, la resistencia a la corrosión y la capacidad de bloqueo de manchas en revestimientos base arquitecturales e industriales. | |
| NALZIN® FA 179 | Elementis | NALZIN® FA-179 es un inhibidor de la corrosión recomendado para sistemas de pintura acuosos para contrarrestar la oxidación rápida. El producto está recomendado también como inhibidor de la corrosión dentro de las latas. NALZIN® FA 179 emulsionado en agua...Vea Mas NALZIN® FA-179 es un inhibidor de la corrosión recomendado para sistemas de pintura acuosos para contrarrestar la oxidación rápida. El producto está recomendado también como inhibidor de la corrosión dentro de las latas. NALZIN® FA 179 emulsionado en agua se puede utilizar como inhibidor temporal del óxido. Vea Menos | |
| Nicron® 002 | Imerys Performance Additives | Talco laminar de alta Poliuretano reza, usado en formulaciones de revestimientos interiores y exteriores, adhesivos y sellantes. | |
| Nicron® 302 | Imerys Performance Additives | Talco laminar de alta Poliuretano reza diseñado para ser usado en formulaciones de goma termoestable, revestimientos, adhesivos y sellantes. | |
| Nicron® 303 | Imerys Performance Additives | Talco laminar de alta Poliuretano reza usado en formulaciones de goma termoestables, revestimientos, adhesivos y sellantes. Es insoluble en el ácido y no abrasivo la composición, extrusión y equipo para aplicación de pintura. | |
| Nicron® 353 | Imerys Performance Additives | De Poliuretano reza elevada, talco laminar que mejora resistencia y flexibilidad de la película en formulaciones del sellantes y proporciona a propiedades de barrera en revestimientos base arquitectónicos e industriales, para mejorar resistencia a la corr...Vea Mas De Poliuretano reza elevada, talco laminar que mejora resistencia y flexibilidad de la película en formulaciones del sellantes y proporciona a propiedades de barrera en revestimientos base arquitectónicos e industriales, para mejorar resistencia a la corrosión y capacidad de bloqueo de manchas. Vea Menos | |
| Nicron® 402 | Imerys Performance Additives | Talco laminar de alta Poliuretano reza usado en los altos sólidos/revestimientos del bajo VOC (Compuesto Organico Volatil) y aplicaciones de adhesivos que requieren extendedores de baja formación de viscosidad. | |
| Nicron® 403 | Imerys Performance Additives | Talco laminar de alta Poliuretano reza que mejora la resistencia y flexibilidad de la película y proporciona propiedades de barrera en revestimientos base arquitectónicos e industriales, para mejorar la resistencia a la corrosión y capacidad de bloqueo ...Vea Mas Talco laminar de alta Poliuretano reza que mejora la resistencia y flexibilidad de la película y proporciona propiedades de barrera en revestimientos base arquitectónicos e industriales, para mejorar la resistencia a la corrosión y capacidad de bloqueo de mancha. Vea Menos | |
| Nicron® 503 | Imerys Performance Additives | Talco laminar de alta Poliuretano reza que aumenta la resistencia y flexibilidad de la película y proporciona propiedades de la barrera en revestimientos base arquitectónicos e industriales, para mejorar la resistencia a la corrosión y la capacidad de b...Vea Mas Talco laminar de alta Poliuretano reza que aumenta la resistencia y flexibilidad de la película y proporciona propiedades de la barrera en revestimientos base arquitectónicos e industriales, para mejorar la resistencia a la corrosión y la capacidad de bloqueo de mancha. Vea Menos | |
| Nubirox FR-10 | Ferro Pigments | El Nubirox FR-10 es un inhibidor líquido a base de nitrito para evitar la oxidación inmediata de los sistemas a base de agua sin afectar negativamente el rendimiento anticorrosión a largo plazo del revestimiento. Es eficaz en concentraciones muy bajas y m...Vea Mas El Nubirox FR-10 es un inhibidor líquido a base de nitrito para evitar la oxidación inmediata de los sistemas a base de agua sin afectar negativamente el rendimiento anticorrosión a largo plazo del revestimiento. Es eficaz en concentraciones muy bajas y muestra actividad en las fases de vapor y líquida. Vea Menos | |
| ORGANOSILICASOL™ DMAC-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ DMAC-ST es sílice coloidal monodispersa en el disolvente orgánico N,N-Dimetilacetamida. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras...Vea Mas El ORGANOSILICASOL™ DMAC-ST es sílice coloidal monodispersa en el disolvente orgánico N,N-Dimetilacetamida. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ EG-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ EG-ST es sílice coloidal monodispersa en el disolvente orgánico etilenglicol. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicacio...Vea Mas El ORGANOSILICASOL™ EG-ST es sílice coloidal monodispersa en el disolvente orgánico etilenglicol. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ IPA-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ IPA-ST es sílice coloidal monodisperso en el disolvente orgánico alcohol isopropílico con una partícula de 10 a15 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimient...Vea Mas El ORGANOSILICASOL™ IPA-ST es sílice coloidal monodisperso en el disolvente orgánico alcohol isopropílico con una partícula de 10 a15 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ IPA-ST-L | Nissan Chemical America Corporation | El ORGANOSILICASOL™ IPA-ST-L es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 40 a 50 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimi...Vea Mas El ORGANOSILICASOL™ IPA-ST-L es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 40 a 50 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ IPA-ST-UP | Nissan Chemical America Corporation | El ORGANOSILICASOL™ IPA-ST-UP es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 40 a 100 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revesti...Vea Mas El ORGANOSILICASOL™ IPA-ST-UP es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 40 a 100 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ IPA-ST-ZL | Nissan Chemical America Corporation | El ORGANOSILICASOL™ IPA-ST-ZL es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 70 a 100 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revesti...Vea Mas El ORGANOSILICASOL™ IPA-ST-ZL es sílice coloidal monodispersa en el disolvente orgánico alcohol isopropílico con una partícula de 70 a 100 µm de tamaño. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ MA-ST-MS | Nissan Chemical America Corporation | Sílice coloidal monodispersa en disolvente orgánico. Se utiliza para mejorar significativamente la resistencia al rayado, astillado y desgaste de plásticos, pinturas barnices y tintas. | Request Sample |
| ORGANOSILICASOL™ MEK-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ MEK-ST es sílice coloidal monodispersa en el disolvente orgánico metiletilcetona con un tamaño de partícula de 10 a 15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en...Vea Mas El ORGANOSILICASOL™ MEK-ST es sílice coloidal monodispersa en el disolvente orgánico metiletilcetona con un tamaño de partícula de 10 a 15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ MIBK-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ MIBK-ST es sílice coloidal monodispersa en el disolvente orgánico metil-isobutil-cetona con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimient...Vea Mas El ORGANOSILICASOL™ MIBK-ST es sílice coloidal monodispersa en el disolvente orgánico metil-isobutil-cetona con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ MT-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ MT-ST es sílice coloidal monodispersa en el disolvente orgánico alcohol metílico con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en p...Vea Mas El ORGANOSILICASOL™ MT-ST es sílice coloidal monodispersa en el disolvente orgánico alcohol metílico con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ NPC-ST-30 | Nissan Chemical America Corporation | El ORGANOSILICASOL™ NPC-ST-30 es sílice coloidal monodispersa en el disolvente orgánico etilenglicol mono-n-propil éter con un tamaño de partícula de 10 a 15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste d...Vea Mas El ORGANOSILICASOL™ NPC-ST-30 es sílice coloidal monodispersa en el disolvente orgánico etilenglicol mono-n-propil éter con un tamaño de partícula de 10 a 15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| ORGANOSILICASOL™ PMA-ST | Nissan Chemical America Corporation | El ORGANOSILICASOL™ PMA-ST es sílice coloidal monodispersa en el disolvente orgánico acetato del monometileter del propilenglicol con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y de...Vea Mas El ORGANOSILICASOL™ PMA-ST es sílice coloidal monodispersa en el disolvente orgánico acetato del monometileter del propilenglicol con un tamaño de partícula de 10-15 µm. Se utiliza para mejorar significativamente la resistencia a rayaduras, astillado y desgaste de revestimientos en plásticos, pinturas y muchas otras aplicaciones. Vea Menos | Request Sample |
| Purox® S Grains Sodium Benzoate | LANXESS (former Emerald Performance Materials) | Purox® S is a sodium benzoate that effectively inhibits corrosion and ash rust in waterborne systems at low concentrations. It may also reduce fouling by reducing the tendency of rust and scale to dislodge from corroded surfaces and does not cause foamin...Vea Mas Purox® S is a sodium benzoate that effectively inhibits corrosion and ash rust in waterborne systems at low concentrations. It may also reduce fouling by reducing the tendency of rust and scale to dislodge from corroded surfaces and does not cause foaming in these applications. Emerald Kalama Chemical was acquired by LANXESS in 2021. Vea Menos | |
| R3-1075 | NuSil Silicone Technology 1 | R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It ca...Vea Mas R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It can also be utilized as a conformal coating for electrical and electronic components including rigid and flexible printed circuit boards. Vea Menos | |
| Raybo 218 NoRust LO | Raybo Chemical | Raybo 218 NoRust LO is an anionic, nitrite-free corrosion inhibitor. This product is most commonly used as an additive to prevent flash rusting in organic coating applications. | |
| Raybo 60 NoRust | Raybo Chemical | Raybo 60 NoRust is a water-based flash rust inhibitor in a clear, straw-colored liquid form. This product is most commonly used as an additive in latex coating system manufacturing applications. | |
| Raybo 80 NoRust | Raybo Chemical | Raybo 80 NoRust is a flash rust inhibitor in a clear, straw-colored liquid form. This product is most commonly used as an additive to prevent flash rusting and in-can corrosion in high-performance protective coating applications. | |
| Raybo 90 NoRust NF | Raybo Chemical | Raybo 90 NoRust NF is a nitrite-free flash rust inhibitor in a straw-colored liquid form. This product is most commonly used as an additive to prevent flash rusting and in-can corrosion in nitrite-sensitive water-reducible coating applications. | |
| Rhodafac® RK-500A | Rhodia Solvay Group | RHODAFAC® RK-500A puede utilizarse para preparar una amplia gama de polímeros acrílicos comerciales de emulsión, incluyendo acrílicos de vinilo y acrílicos de estireno. Estos polímeros son útiles en pinturas de látex, adhesivos, textiles y revestimientos ...Vea Mas RHODAFAC® RK-500A puede utilizarse para preparar una amplia gama de polímeros acrílicos comerciales de emulsión, incluyendo acrílicos de vinilo y acrílicos de estireno. Estos polímeros son útiles en pinturas de látex, adhesivos, textiles y revestimientos de papel. RHODAFAC® RK-500A ofrece mayor resistencia a la corrosión y excelente resistencia al calor y estabilidad a la luz, por lo que se recomienda especialmente para aplicaciones de revestimientos de metal. Vea Menos | |
| Rhodafac® RS-610/A25 | Rhodia Solvay Group | RHODAFAC® RS-610/A25 es un polioxietileno tridecil eter de fosfato de amonio aniónico que se suministra en forma de líquido claro. Este producto tiene tensioactivos aniónicos primarios sin alquilfenoletoxilato muy eficaces para la síntesis del látex acríl...Vea Mas RHODAFAC® RS-610/A25 es un polioxietileno tridecil eter de fosfato de amonio aniónico que se suministra en forma de líquido claro. Este producto tiene tensioactivos aniónicos primarios sin alquilfenoletoxilato muy eficaces para la síntesis del látex acrílico, acrílico estireno y vinil-acrílico. Presenta excelentes propiedades en películas, incluyendo la inhibición de la corrosión, estabilidad al calor y a la luz y claridad. RHODAFAC® RS-610/A25 se presenta en cantidades a granel, en bidones plásticos de 200 kg, 460 lb y 2200 lb. También puede presentarse en tamaños de embalaje alternativos previa solicitud. Vea Menos | |
| SETAL® 41-1409 | Allnex | SETAL 41-1409 is recommended for industrial finishes cured by bake, air-dry or force-dry. SETAL 41-1409 exhibits the desirable properties of very fast dry, good corrosion resistance and low application viscosity. | Request Sample |
| SHIELDEX® AC 3 Non-Toxic Anti-Corrosion Pigment | Univar Solutions | SHIELDEX® AC 3 Non-Toxic Anti-Corrosion Pigment is a calcium ion-exchanged amorphous silica appearing as a white, free flowing powder. It is an easily dispersible, non-toxic, high performance anti-corrosion pigment with low particle size. This grade is us...Vea Mas SHIELDEX® AC 3 Non-Toxic Anti-Corrosion Pigment is a calcium ion-exchanged amorphous silica appearing as a white, free flowing powder. It is an easily dispersible, non-toxic, high performance anti-corrosion pigment with low particle size. This grade is used in coil coating primers and one- or two-component wash primers. Vea Menos | |
| SHIELDEX® AC 5 Non-Toxic Anti-Corrosion Pigment | Univar Solutions | SHIELDEX® AC 5 Non-Toxic Anti-Corrosion Pigment is a calcium ion-exchanged amorphous silica appearing as a white, free flowing powder. It is an easily dispersible, non-toxic, high performance anti-corrosion pigment. This product is mainly used for water-b...Vea Mas SHIELDEX® AC 5 Non-Toxic Anti-Corrosion Pigment is a calcium ion-exchanged amorphous silica appearing as a white, free flowing powder. It is an easily dispersible, non-toxic, high performance anti-corrosion pigment. This product is mainly used for water-borne paint systems, general industrial coatings, maintenance and protective coating applications and automotive paints. Vea Menos | |
| SHIELDEX® C 303 Non-Toxic Anti-Corrosion Pigment | Univar Solutions | SHIELDEX® C 303 Non-Toxic Anti-Corrosion Pigment is a synthetic calcium ion-exchanged amorphous silica appearing as white, free flowing powder. This product is an easily dispersible, non-toxic, high performance anti-corrosion pigment of relatively low par...Vea Mas SHIELDEX® C 303 Non-Toxic Anti-Corrosion Pigment is a synthetic calcium ion-exchanged amorphous silica appearing as white, free flowing powder. This product is an easily dispersible, non-toxic, high performance anti-corrosion pigment of relatively low particle size. Its main use as an anti-corrosion pigment is in coil coating primers, reactive primer systems and powder coatings. Vea Menos | |
| Sierralite® 252HS | Imerys Performance Additives | Talco laminar de alta Poliuretano reza que aumenta la resistencia y flexibilidad de la película y proporciona propiedades de la barrera en revestimientos base arquitectónicos e industriales, para mejorar la resistencia a la corrosión y la capacidad de b...Vea Mas Talco laminar de alta Poliuretano reza que aumenta la resistencia y flexibilidad de la película y proporciona propiedades de la barrera en revestimientos base arquitectónicos e industriales, para mejorar la resistencia a la corrosión y la capacidad de bloqueo de mancha. Vea Menos | |
| Sierralite® 402 | Imerys Performance Additives | Talco laminar de alta Poliuretano reza usado en los altos sólidos/revestimientos de bajo VOC (Compuesto Organico Volatil) y aplicaciones de adhesivas que requieren extensores de baja formación de viscosidad. | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...Vea Mas Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. Vea Menos | |
| Silverline® 202 | Imerys Performance Additives | Clorito de alta Poliuretano reza. Un pigmento mineral de calidad superior, usado en revestimientos interiores de PVC (Cloruro de Plolivinilo) de alta calidad, donde se presenta el problema de grietas en el lodo, revestimientos industriales a base de agua ...Vea Mas Clorito de alta Poliuretano reza. Un pigmento mineral de calidad superior, usado en revestimientos interiores de PVC (Cloruro de Plolivinilo) de alta calidad, donde se presenta el problema de grietas en el lodo, revestimientos industriales a base de agua pinturas arquitecturales exteriores. Vea Menos | |
| Silverline® 303 | Imerys Performance Additives | Es un pigmento mineral blanco de alta calidad, usado en revestimientos PVC (Cloruro de Plolivinilo) de alta calidad, revestimientos industriales de alto sólidos, y revestimientos y juntas resistentes a la corrosión. | |
| Silverline® 403 | Imerys Performance Additives | De Poliuretano reza elevada, talco laminar. Silverline 002 es un aditivo de superior control de anti-endurecimiento/flujo, utilizado donde se requieran características de manejo mejoradas. | |
| SIPERNAT® 622 LS | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 622 LS is an untreated, finely ground silica. This specialty silica provides good matting efficiency with minimal viscosity increase in printing ink applications. | Request Sample |
| SNOWTEX® IPA-ST-UP | Nissan Chemical America Corporation | SNOWTEX® IPA-ST-UP crea una serie de partículas alargadas. Comparadas con las partículas de sílice esféricas, las partículas alargadas de SNOWTEX® IPA-ST-UP ofrecen varias ventajas únicas. Se caracteriza por la excelente capacidad peliculígena, la buena a...Vea Mas SNOWTEX® IPA-ST-UP crea una serie de partículas alargadas. Comparadas con las partículas de sílice esféricas, las partículas alargadas de SNOWTEX® IPA-ST-UP ofrecen varias ventajas únicas. Se caracteriza por la excelente capacidad peliculígena, la buena adhesión, la buena migración y la alta viscosidad de <20 mPa•s. Este productos se estabiliza en IPA. Tiene aplicaciones como agente de revestimiento para papel, plásticos y metales, un aglutinante parar tratamientos refractarios, cerámicos, fibra de vidrio y textiles. Vea Menos | Request Sample |
| SNOWTEX® ST-20L | Nissan Chemical America Corporation | El SNOWTEX® ST-20L es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <3 mPa•s. Últimamente, se ha utilizado en la industria de semiconductores como agente pulidor para placas...Vea Mas El SNOWTEX® ST-20L es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <3 mPa•s. Últimamente, se ha utilizado en la industria de semiconductores como agente pulidor para placas de silicio. Otras aplicaciones del SNOWTEX® ST-20L incluyen un aglutinante catalizador, tratamiento textil, pulido, aglutinante para fundiciones, pinturas/revestimientos, tratamiento refractario, anticorrosivo y de superficies metálicas. Vea Menos | Request Sample |
| SNOWTEX® ST-40 | Nissan Chemical America Corporation | SNOWTEX® ST-40 es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. La viscosidad de este producto es de <25 mPa•s. Se aplica como aglutinante catalizador, tratamiento textil, pulidor, aglutinante para tratamientos ...Vea Mas SNOWTEX® ST-40 es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. La viscosidad de este producto es de <25 mPa•s. Se aplica como aglutinante catalizador, tratamiento textil, pulidor, aglutinante para tratamientos de superficies de fundición, de pintura/revestimiento, refractarias, anticorrosión y metálicas. Vea Menos | Request Sample |
| SNOWTEX® ST-50 | Nissan Chemical America Corporation | SNOWTEX® ST-50 es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <50 mPa•s. Se aplica como aglutinante catalizador, tratamiento textil, pulidor, aglutinante para tratamientos de superficie...Vea Mas SNOWTEX® ST-50 es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <50 mPa•s. Se aplica como aglutinante catalizador, tratamiento textil, pulidor, aglutinante para tratamientos de superficies de fundición, de pintura/revestimiento, refractarias, anticorrosión y metálicas. Vea Menos | Request Sample |
| SNOWTEX® ST-C | Nissan Chemical America Corporation | SNOWTEX® ST-C es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <10 mPa•s. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil, tratamiento de superficies metálicas...Vea Mas SNOWTEX® ST-C es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <10 mPa•s. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil, tratamiento de superficies metálicas, pintura, revestimiento, aglutinante para películas inorgánicas y tratamientos especiales del papel. Vea Menos | Request Sample |
| SNOWTEX® ST-N | Nissan Chemical America Corporation | SNOWTEX® ST-N es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <6 mPa•s. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil, tratamiento de superficies metálicas,...Vea Mas SNOWTEX® ST-N es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <6 mPa•s. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil, tratamiento de superficies metálicas, pintura, revestimiento, aglutinante para películas inorgánicas y tratamientos especiales del papel. Vea Menos | Request Sample |
| SNOWTEX® ST-O | Nissan Chemical America Corporation | SNOWTEX® ST-O es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <3 mPa•s con un tamaño de partícula de 2 a 4 µm. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil...Vea Mas SNOWTEX® ST-O es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Tiene una viscosidad de <3 mPa•s con un tamaño de partícula de 2 a 4 µm. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil, tratamiento de superficies metálicas, pintura, revestimiento, aglutinante para películas inorgánicas y tratamiento especial del papel. Vea Menos | Request Sample |
| SNOWTEX® ST-O-UP | Nissan Chemical America Corporation | SNOWTEX® ST-O-UP es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <20 mPa•s y un tamaño de partícula de 40 a 100 µm. Se utiliza en aplicaciones como aglutinante catalizador,...Vea Mas SNOWTEX® ST-O-UP es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <20 mPa•s y un tamaño de partícula de 40 a 100 µm. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil, tratamiento de superficies metálicas, pintura, revestimiento, aglutinante para películas inorgánicas y tratamiento especial del papel. Vea Menos | Request Sample |
| SNOWTEX® ST-OL | Nissan Chemical America Corporation | SNOWTEX® ST-OL es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <3 mPa•s y un tamaño de partícula de 10 a 20 µm. Se utiliza en aplicaciones como aglutinante catalizador, tra...Vea Mas SNOWTEX® ST-OL es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <3 mPa•s y un tamaño de partícula de 10 a 20 µm. Se utiliza en aplicaciones como aglutinante catalizador, tratamiento textil, tratamiento de superficies metálicas, pintura, revestimiento, aglutinante para películas inorgánicas y tratamiento especial del papel. Vea Menos | Request Sample |
| SNOWTEX® ST-PS-M | Nissan Chemical America Corporation | SNOWTEX® ST-PS-M es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. El ST-PS tiene una viscosidad de <100 mPa•s y se le llama “collar de perlas” por la forma de sus partículas. Se utiliza en aplicaciones como trat...Vea Mas SNOWTEX® ST-PS-M es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. El ST-PS tiene una viscosidad de <100 mPa•s y se le llama “collar de perlas” por la forma de sus partículas. Se utiliza en aplicaciones como tratamiento de superficies de plástico/metal, aglutinante para catalizadores, modificador de pinturas o agentes de revestimiento, agente aglutinante y de fundición. Vea Menos | Request Sample |
| SNOWTEX® ST-PS-MO | Nissan Chemical America Corporation | SNOWTEX® ST-PS-MO es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto se destaca por su forma de perla, el excelente recubrimiento, buena adhesión, gran porosidad y alta viscosidad. Se utiliza en apli...Vea Mas SNOWTEX® ST-PS-MO es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto se destaca por su forma de perla, el excelente recubrimiento, buena adhesión, gran porosidad y alta viscosidad. Se utiliza en aplicaciones como tratamiento de superficies de plástico/metal, aglutinante para catalizadores, modificador de pinturas o agentes de revestimiento, agente aglutinante y de fundición. Vea Menos | Request Sample |
| SNOWTEX® ST-PS-S | Nissan Chemical America Corporation | SNOWTEX® ST-PS-S es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <100 mPa•s y un tamaño de partícula de 10 a 15/80 a 150 µm. Se utiliza en aplicaciones como tratamiento de ...Vea Mas SNOWTEX® ST-PS-S es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <100 mPa•s y un tamaño de partícula de 10 a 15/80 a 150 µm. Se utiliza en aplicaciones como tratamiento de superficies de plástico/metal, aglutinante para catalizadores, modificador de pinturas o agentes de revestimiento, agente aglutinante y de fundición. Vea Menos | Request Sample |
| SNOWTEX® ST-PS-SO | Nissan Chemical America Corporation | SNOWTEX® ST-PS-SO es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <100 mPa•s y un tamaño de partícula de 80 a 150 µm. Se utiliza en aplicaciones como tratamiento de superfi...Vea Mas SNOWTEX® ST-PS-SO es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <100 mPa•s y un tamaño de partícula de 80 a 150 µm. Se utiliza en aplicaciones como tratamiento de superficies de plástico/metal, aglutinante para catalizadores, modificador de pinturas o agentes de revestimiento, agente aglutinante y de fundición. Vea Menos | Request Sample |
| SNOWTEX® ST-UP | Nissan Chemical America Corporation | SNOWTEX® ST-UP es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <100 mPa•s y un tamaño de partícula de 9 a 15/40 a 100 µm. Tiene aplicaciones como agente de revestimiento pa...Vea Mas SNOWTEX® ST-UP es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. Este producto tiene una viscosidad de <100 mPa•s y un tamaño de partícula de 9 a 15/40 a 100 µm. Tiene aplicaciones como agente de revestimiento para papel, plásticos y metales, un aglutinante parar tratamientos refractarios, cerámicos, fibra de vidrio y textiles. Vea Menos | Request Sample |
| SNOWTEX® ST-ZL | Nissan Chemical America Corporation | SNOWTEX® ST-ZL es sílice coloidal para usar en muchas aplicaciones con papel, fibra, acero y catalizadores. El tamaño de la partícula de este producto es de 90 µm. | Request Sample |
| Strodex™ LFK-70 | Ashland | Strodex™ LFK-70 es la forma neutralizada (sal de potasio) de un coéster de fosfato de alcoholes alifáticos. Exhibe menor formación de espuma en comparación con ésteres de fosfato alternativos sin dejar de ofrecer características de humectación similares...Vea Mas Strodex™ LFK-70 es la forma neutralizada (sal de potasio) de un coéster de fosfato de alcoholes alifáticos. Exhibe menor formación de espuma en comparación con ésteres de fosfato alternativos sin dejar de ofrecer características de humectación similares. Vea Menos | |
| Strodex™ MO-100 | Ashland | Strodex™ MO-100 neutralizado in situ con trietilamina o hidróxido de amonio es muy recomendable para su uso en revestimientos debido a su resistencia a la oxidación superficial y también por su sensibilidad reducida al agua. | |
| Strodex™ MR-100 | Ashland | Strodex™ MR-100 es útil en las formulaciones diluidas con solvente, donde las características de mejora de la dispersión y humectación de los pigmentos más la humectación del sustrato y anticorrosivas se consideran fundamentales. | |
| Strodex™ MRK-98 | Ashland | Strodex™ MRK-98 es un promotor de la aceptación de color y de brillo neutralizado con sal de potasio, emulsionante para polimerización de emulsiones con una reducción de la sensibilidad al agua en las películas secas y dispersante auxiliar con propiedades...Vea Mas Strodex™ MRK-98 es un promotor de la aceptación de color y de brillo neutralizado con sal de potasio, emulsionante para polimerización de emulsiones con una reducción de la sensibilidad al agua en las películas secas y dispersante auxiliar con propiedades anticorrosivas. Vea Menos | |
| Strodex™ P-100 | Ashland | Se recomienda el uso de Strodex™ P-100 en formulaciones de esmalte alquídicos de alto brillo reducibles con agua para ayudar a estabilizar los catalizadores-secadores de cobalto y circonio contra la hidrólisis y la pérdida de la actividad seca a niveles e...Vea Mas Se recomienda el uso de Strodex™ P-100 en formulaciones de esmalte alquídicos de alto brillo reducibles con agua para ayudar a estabilizar los catalizadores-secadores de cobalto y circonio contra la hidrólisis y la pérdida de la actividad seca a niveles elevados de pH. Vea Menos | |
| Strodex™ PK-0VOC | Ashland | Strodex™ PK-0VOC es la forma neutralizada (sal de potasio) de un coéster de fosfato de alcoholes alifáticos. Está diseñado para impartir la mejora de aceptación de brillo y color en pinturas de látex a base de agua. |
