| AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 200 es una sílice pirogénica hidrofílica con una superficie específica de 200 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, cosméticos, compuestos de cable y geles, goma de silicona, y en la protecció...Vea Mas AEROSIL® 200 es una sílice pirogénica hidrofílica con una superficie específica de 200 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, cosméticos, compuestos de cable y geles, goma de silicona, y en la protección de las plantas. AEROSIL® 200 tiene control de la reología y tixotropía de los sistemas líquidos, aglutinantes y polímeros. También se utiliza para mejorar el flujo libre y anti-aglutinante característico de polvos, así como un anti-sedimentación, espesamiento, y agente anti-flacidez. Vea Menos | Request Sample |
| AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...Vea Mas AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. Vea Menos | Request Sample |
| AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based ...Vea Mas AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. Vea Menos | Request Sample |
| AEROSIL® R 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia. | Request Sample |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...Vea Mas CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. Vea Menos | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...Vea Mas CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. Vea Menos | |
| Celofiber® CF200W | Celotech Chemical Co., Ltd. | Celofiber® CF200W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF200W has an outstanding influ...Vea Mas Celofiber® CF200W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF200W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF200W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 200um. Vea Menos | |
| Celofiber® CF300W | Celotech Chemical Co., Ltd. | Celofiber® CF300W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF300W has an outstanding influ...Vea Mas Celofiber® CF300W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF300W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF300W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 300um. Vea Menos | |
| Celofiber® CF450G | Celotech Chemical Co., Ltd. | Celofiber® CF450G is a powdery to fibrous cellulose additive for use in construction chemical products. The structure viscose behavior of Celofiber® CF450G has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It impr...Vea Mas Celofiber® CF450G is a powdery to fibrous cellulose additive for use in construction chemical products. The structure viscose behavior of Celofiber® CF450G has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF450G extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 450um. Vea Menos | |
| Celofiber® CF450W | Celotech Chemical Co., Ltd. | Celofiber® CF450W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF450W has an outstanding influ...Vea Mas Celofiber® CF450W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF450W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF450W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 450um. Vea Menos | |
| Celofiber® CF500W | Celotech Chemical Co., Ltd. | Celofiber® CF500W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF500W has an outstanding influ...Vea Mas Celofiber® CF500W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF500W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF500W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 500um. Vea Menos | |
| Celofiber® CF60W | Celotech Chemical Co., Ltd. | Celofiber® CF60W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF60W has an outstanding influen...Vea Mas Celofiber® CF60W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF60W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF60W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 60um. Vea Menos | |
| Celofiber® CF800W | Celotech Chemical Co., Ltd. | Celofiber® CF800W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF800W has an outstanding influ...Vea Mas Celofiber® CF800W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF800W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF800W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 800um. Vea Menos | |
| Celopro® CS160 | Celotech Chemical Co., Ltd. | Celopro® CS160 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...Vea Mas Celopro® CS160 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. Vea Menos | |
| Celopro® CS170 | Celotech Chemical Co., Ltd. | Celopro® CS170 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...Vea Mas Celopro® CS170 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. Vea Menos | |
| Celopro® CS180 | Celotech Chemical Co., Ltd. | Celopro® CS180 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...Vea Mas Celopro® CS180 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. Vea Menos | |
| Celopro® HHB15S | Celotech Chemical Co., Ltd. | Celopro®HHB15S es un tipo de hidroxietil celulosa (HEC) de viscosidad media con solubilidad retardada. Es un material no iónico, soluble en agua que puede aplicarse como espesador para sistemas a base de agua, incluidas las pinturas de látex, los producto...Vea Mas Celopro®HHB15S es un tipo de hidroxietil celulosa (HEC) de viscosidad media con solubilidad retardada. Es un material no iónico, soluble en agua que puede aplicarse como espesador para sistemas a base de agua, incluidas las pinturas de látex, los productos de cuidado personal y los productos de limpieza para el hogar. Vea Menos | |
| Celopro® HHB30S | Celotech Chemical Co., Ltd. | Celopro®HHB30S es un tipo de hidroxietil celulosa (HEC) de viscosidad medio alta. Es un material soluble en agua no iónico que puede aplicarse como espesante para sistemas de base acuosa incluidos pinturas de látex, productos de cuidado personal y product...Vea Mas Celopro®HHB30S es un tipo de hidroxietil celulosa (HEC) de viscosidad medio alta. Es un material soluble en agua no iónico que puede aplicarse como espesante para sistemas de base acuosa incluidos pinturas de látex, productos de cuidado personal y productos de limpieza para el hogar. Vea Menos | |
| Celopro® HHB50S | Celotech Chemical Co., Ltd. | Celopro®HHB50S es un tipo de hidroxietil celulosa (HEC) de alta viscosidad con solubilidad retardada. Es un material no iónico soluble en agua. Este producto puede aplicarse como espesador para sistemas a base de agua, incluidas las pinturas de látex, los...Vea Mas Celopro®HHB50S es un tipo de hidroxietil celulosa (HEC) de alta viscosidad con solubilidad retardada. Es un material no iónico soluble en agua. Este producto puede aplicarse como espesador para sistemas a base de agua, incluidas las pinturas de látex, los productos de cuidado personal y los productos de limpieza para el hogar. Vea Menos | |
| Celopro® HHB60S | Celotech Chemical Co., Ltd. | Celopro® HHB60S es un tipo de hidroxietil celulosa (HEC) de alta viscosidad con solubilidad retardada. Es un material no iónico soluble en agua. Este producto puede aplicarse como espesador para sistemas a base de agua, incluidas las pinturas de látex, lo...Vea Mas Celopro® HHB60S es un tipo de hidroxietil celulosa (HEC) de alta viscosidad con solubilidad retardada. Es un material no iónico soluble en agua. Este producto puede aplicarse como espesador para sistemas a base de agua, incluidas las pinturas de látex, los productos de cuidado personal y los productos de limpieza para el hogar. Vea Menos | |
| Celopro® HHB70S | Celotech Chemical Co., Ltd. | Celopro® MH70M FP es un tipo de hidroxietil metilcelulosa (HEMC) de viscosidad extremadamente alta que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención...Vea Mas Celopro® MH70M FP es un tipo de hidroxietil metilcelulosa (HEMC) de viscosidad extremadamente alta que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención de agua. Puede aplicarse a revoques y yesos a base de cemento, rellenos para juntas, yesos aplicados a máquina, adhesivos para azulejos, revoques de yeso y adobe, yesos de capa delgada y revoques a base de yeso. Vea Menos | |
| Celopro® MH15M P | Celotech Chemical Co., Ltd. | Celopro® MH15M P es un tipo de hidroxietil metilcelulosa (HEMC) de viscosidad media que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención de agua. Estos...Vea Mas Celopro® MH15M P es un tipo de hidroxietil metilcelulosa (HEMC) de viscosidad media que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención de agua. Estos productos, ofrecidos bajo la marca Celopro® MH, son aditivos altamente efectivos usados para mejorar la calidad y características de proceso de los materiales de construcción como yesos y revoques, morteros, adhesivos para azulejos, compuestos para juntas y pinturas de emulsión. Vea Menos | |
| Celopro® MH40MP | Celotech Chemical Co., Ltd. | Celopro® MH40M P es un tipo de hidroxietil metilcelulosa (HEMC) de viscosidad alta que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención de agua. Estos ...Vea Mas Celopro® MH40M P es un tipo de hidroxietil metilcelulosa (HEMC) de viscosidad alta que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención de agua. Estos productos, ofrecidos bajo la marca CELOPRO™ MH, son aditivos altamente efectivos usados para mejorar la calidad y características de proceso de los materiales de construcción como yesos y revoques, morteros, adhesivos para azulejos, compuestos para juntas y pinturas de emulsión. Vea Menos | |
| Celopro® MH55M FP | Celotech Chemical Co., Ltd. | Celopro® MH55M FP es un tipo de hidroxietil metilcelulosa (HEMC) de alta viscosidad con fino tamaño de partículas. Provee muchos de los mismos beneficios que otros derivados de la metilcelulosa, como la capacidad de espesar con eficacia y brindar retenció...Vea Mas Celopro® MH55M FP es un tipo de hidroxietil metilcelulosa (HEMC) de alta viscosidad con fino tamaño de partículas. Provee muchos de los mismos beneficios que otros derivados de la metilcelulosa, como la capacidad de espesar con eficacia y brindar retención de agua. Este producto ha sido aplicado en adhesivos para baldosas, enlucidos, revoques finos, compuestos para alisado a base de yeso, revoques aplicados con máquinas y terminaciones decorativas. Vea Menos | |
| Celopro® MH70M FP | Celotech Chemical Co., Ltd. | Celopro® MH70M FP es un tipo de hidroxietil metilcelulosa (HEMC) de viscosidad extremadamente alta que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención...Vea Mas Celopro® MH70M FP es un tipo de hidroxietil metilcelulosa (HEMC) de viscosidad extremadamente alta que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención de agua. Puede aplicarse a revoques y yesos a base de cemento, rellenos para juntas, yesos aplicados a máquina, adhesivos para azulejos, revoques de yeso y adobe, yesos de capa delgada y revoques a base de yeso. Vea Menos | |
| Celopro® MK20M FP | Celotech Chemical Co., Ltd. | Celopro® MK20M FP es una hidroxipropil metilcelulosa (HPMC) no modificada de viscosidad medio alta que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención...Vea Mas Celopro® MK20M FP es una hidroxipropil metilcelulosa (HPMC) no modificada de viscosidad medio alta que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención de agua. Celopro® de tipo no modificado ofrece flexibilidad para secar compañías de mortero para una formulación sencilla. Vea Menos | |
| Celopro® MK30M FP | Celotech Chemical Co., Ltd. | Celopro® MK30M FP es una hidroxipropil metilcelulosa (HPMC) no modificada de viscosidad medio alta que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención...Vea Mas Celopro® MK30M FP es una hidroxipropil metilcelulosa (HPMC) no modificada de viscosidad medio alta que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención de agua. Celopro® de tipo no modificado ofrece flexibilidad para secar compañías de mortero para una formulación sencilla. Puede aplicarse como espesante en adhesivos para azulejos, yesos, revestimientos delgados, compuestos para alisado, etc. Vea Menos | |
| Celopro® MK40M FP | Celotech Chemical Co., Ltd. | Celopro® MK40M FP es una hidroxipropil metilcelulosa (HPMC) no modificada de alta viscosidad que ofrece muchos de los mismos beneficios que otros derivados de la metilcelulosa, como la capacidad de espesar de manera eficaz y brindar retención de agua. El ...Vea Mas Celopro® MK40M FP es una hidroxipropil metilcelulosa (HPMC) no modificada de alta viscosidad que ofrece muchos de los mismos beneficios que otros derivados de la metilcelulosa, como la capacidad de espesar de manera eficaz y brindar retención de agua. El tipo no modificado de Celopro® ofrece flexibilidad a las compañías de morteros secos para lograr una fórmula sencilla. Se puede aplicar como espesador en adhesivos para baldosas, revoques de cemento y cal, enlucidos, revoques, revoques aplicados con máquinas, rellenos para juntas y sistema de aislamiento térmico. Vea Menos | |
| Celopro® MK60M FP | Celotech Chemical Co., Ltd. | Celopro® MK60M FP es un tipo de hidroxipropil metilcelulosa (HPMC) de viscosidad extremadamente alta que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retenci...Vea Mas Celopro® MK60M FP es un tipo de hidroxipropil metilcelulosa (HPMC) de viscosidad extremadamente alta que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención de agua. Vea Menos | |
| Celopro® MK70M FP | Celotech Chemical Co., Ltd. | Celopro® MK70M FP es un tipo de hidroxipropil metilcelulosa (HPMC) de viscosidad extremadamente alta que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retenci...Vea Mas Celopro® MK70M FP es un tipo de hidroxipropil metilcelulosa (HPMC) de viscosidad extremadamente alta que brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención de agua. Puede aplicarse a yesos, rellenos para juntas, adhesivos para azulejos, revoques de yeso y adobe, yesos de capa delgada, etc. Vea Menos | |
| Celopro® MK70MS FP | Celotech Chemical Co., Ltd. | Celopro® MK70MS FP es un tipo de hidroxipropil metilcelulosa (HPMC) de viscosidad extremadamente alta con tratamiento de superficie. Brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera efic...Vea Mas Celopro® MK70MS FP es un tipo de hidroxipropil metilcelulosa (HPMC) de viscosidad extremadamente alta con tratamiento de superficie. Brinda muchos de los mismos beneficios que otros derivados de metilcelulosa, como la capacidad para espesar de manera eficiente y proporcionar retención de agua. Este producto puede aplicarse en yesos, rellenos para juntas, adhesivos para azulejos, revoques de yeso y adobe y yesos de capa delgada. Vea Menos | |
| CRAYVALLAC® ANTISETTLE CVP | Arkema Rheology & Specialty Additives | CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent contro...Vea Mas CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent control of sedimentation combined with ease of application. In addition to coatings applications, CRAYVALLAC® ANTISETTLE CVP has also been used successfully in a multitude of other applications such as inks, adhesives, mastics, caulks, sealants, fillers, greases and lubricants. Vea Menos | |
| CRAYVALLAC® EXTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLA...Vea Mas CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximized when activation was performed at high temperatures. Vea Menos | |
| CRAYVALLAC® LA-150 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-150 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to medium to high polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | |
| CRAYVALLAC® LA-250 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-250 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to low polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | |
| CRAYVALLAC® LA-377 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitab...Vea Mas CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitability for metal coating as its formula is lithium chloride-free. CRAYVALLAC® LA-377 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided. Vea Menos | |
| CRAYVALLAC® LV | Arkema Rheology & Specialty Additives | CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It impart...Vea Mas CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. Vea Menos | |
| CRAYVALLAC® MT | Arkema Rheology & Specialty Additives | CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromati...Vea Mas CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. It shows excellent control of sedimentation combined with ease of application. Vea Menos | |
| CRAYVALLAC® Optima | Arkema Rheology & Specialty Additives | CRAYVALLAC® Optima is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application f...Vea Mas CRAYVALLAC® Optima is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application for its smoother viscosity resulting in good compromise between levelling and sag resistance. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. Vea Menos | |
| CRAYVALLAC® PA3 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to sol...Vea Mas CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. Vea Menos | |
| CRAYVALLAC® PA3 WDA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscos...Vea Mas CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscosity recovery to coating formulations. In coating systems, its crystalline fibres form an interacting network which gives rise to the shear-thinning rheology of the final coating. It provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling. Vea Menos | |
| CRAYVALLAC® PA3 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 p...Vea Mas CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. Vea Menos | |
| CRAYVALLAC® PA3 XAF 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity). CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres...Vea Mas CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity). CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Vea Menos | |
| CRAYVALLAC® PA4 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for p...Vea Mas CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. CRAYVALLAC® PA4 BA 20 is especially suited to coatings demanding a higher degree of surface gloss or transparency. Vea Menos | |
| CRAYVALLAC® PA4 WDA 12 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA ...Vea Mas CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA 12 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. Vea Menos | |
| CRAYVALLAC® PA4 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 p...Vea Mas CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. Vea Menos | |
| CRAYVALLAC® PA5 XSR 25 | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...Vea Mas CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. Vea Menos | |
| CRAYVALLAC® SF | Arkema Rheology & Specialty Additives | CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with an enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydro...Vea Mas CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with an enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. Compared to other hydrogenated castor oil based rheology modifiers, CRAYVALLAC® SF is more tolerant to strong solvents and high processing temperatures due to the presence of its unique performance enhancing amide. The activation process constitutes the conversion of the CRAYVALLAC® SF particles to an interacting network of fibre-like particles. It is this network that gives rise to the final coating’s shear thinning rheology. This shear thinning characteristic providesa very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Vea Menos | |
| CRAYVALLAC® SL | Arkema Rheology & Specialty Additives | CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL pa...Vea Mas CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance. Vea Menos | |
| CRAYVALLAC® SLT | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the ra...Vea Mas CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 30 - 80°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. Vea Menos | |
| CRAYVALLAC® SLW | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...Vea Mas CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. Vea Menos | |
| CRAYVALLAC® SLX | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the r...Vea Mas CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 60 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. Vea Menos | |
| CRAYVALLAC® SUPER | Arkema Rheology & Specialty Additives | CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net...Vea Mas CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. Vea Menos | |
| CRAYVALLAC® ULTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result...Vea Mas CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. Vea Menos | |
| HB-612 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-612 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good rheological control, anti-sagging, free-flow, and anti-caking characteristics. This product is designed for use i...Vea Mas HB-612 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good rheological control, anti-sagging, free-flow, and anti-caking characteristics. This product is designed for use in adhesives & sealants and paints & coatings. Vea Menos | |
| Jetfil® P200 | Imerys Performance Additives | CP-1 es Un tipo de bentonita orgánica auto dispersa, gelatina tixotrópica de alta eficiencia, que se aplica a sistemas solventes de polaridad baja y mediana-alta de los alifáticos, aromáticos, o la mezcla de disolventes con los aromáticos y la cetona, és...Vea Mas CP-1 es Un tipo de bentonita orgánica auto dispersa, gelatina tixotrópica de alta eficiencia, que se aplica a sistemas solventes de polaridad baja y mediana-alta de los alifáticos, aromáticos, o la mezcla de disolventes con los aromáticos y la cetona, éster, éter, alcohol, etc. Vea Menos | |
| Jetfil® P350 | Imerys Performance Additives | Talco laminar de alta Poliuretano reza, usado en revestimientos, adhesivos y formulaciones del sellante para mejorar las propiedades de la resistencia a la tracción, de flexibilidad y de barrera, de las películas curadas. | |
| Jetfil® P500 | Imerys Performance Additives | Talco laminar de alto brillo, recomendado para productos extruidos y moldeados de goma para mejorar el módulo y resistencia a la tracción. | |
| Mistron® 353 | Imerys Performance Additives | De De Poliuretano reza elevada, talco láminas usado en poliolefinas para aumentar la rigidez y para elevar la temperatura de desviación de calor (HDT). | |
| Mistron® 554 | Imerys Performance Additives | De De Poliuretano reza elevada, talco laminar que mejora la durabilidad exterior y las propiedades de barrera en revestimientos base de arquitectura, acabados, pinturas de tráfico, pinturas de textura, y los comPoliuretano estos de comPoliuretano estos. | |
| Mistron® Monomix | Imerys Performance Additives | De De Poliuretano reza elevada, talco laminar que mejora la resistencia y flexibilidad de la película en formulaciones de selladores y proporciona propiedades de barrera en revestimientos base arquitectónicos e industriales, para mejorar resistencia a la...Vea Mas De De Poliuretano reza elevada, talco laminar que mejora la resistencia y flexibilidad de la película en formulaciones de selladores y proporciona propiedades de barrera en revestimientos base arquitectónicos e industriales, para mejorar resistencia a la corrosión y capacidad de bloqueo de manchas. Vea Menos | |
| Mistron® Ultramix | Imerys Performance Additives | Combina alta Poliuretano reza de talco, morfología del tipo carbonato y buen control de tamaño alto. Proporciona resistencia al fregado comparable comen y carbonato dos y seca bien en la Texas o en sistemas basados en solvente. | |
| MONORAL® 3300 | HS CHEM CO.,LTD | MONORAL® 3300 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often use...Vea Mas MONORAL® 3300 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often used in heavy duty coatings, industrial coatings, and architectural coatings. Vea Menos | |
| MONORAL® 3300H | HS CHEM CO.,LTD | MONORAL® 3300H is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable with most solvent based synthetic resin coatings. It is used i...Vea Mas MONORAL® 3300H is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable with most solvent based synthetic resin coatings. It is used in heavy duty coatings, industrial coatings, and architectural coatings. Vea Menos | |
| MONORAL® 3300K | HS CHEM CO.,LTD | MONORAL® 3300K is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often us...Vea Mas MONORAL® 3300K is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often used in heavy duty coatings, industrial coatings, and architectural coatings. Vea Menos | |
| MONORAL® 3300M | HS CHEM CO.,LTD | MONORAL® 3300M is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often us...Vea Mas MONORAL® 3300M is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often used in heavy duty coatings, industrial coatings, and architectural coatings. Vea Menos | |
| MONORAL® 3300S | HS CHEM CO.,LTD | MONORAL® 3300S is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often us...Vea Mas MONORAL® 3300S is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often used in heavy duty coatings, industrial coatings, and architectural coatings. Vea Menos | |
| MONORAL® 5500 | HS CHEM CO.,LTD | MONORAL® 5500 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. This product is...Vea Mas MONORAL® 5500 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. This product is used in heavy duty coatings, industrial coatings, and architectural coatings. Vea Menos | |
| MONORAL® 8500 | HS CHEM CO.,LTD | MONORAL® 8500 is an organically modified derivative of castor oil that comes in the form of a white powder. This product is used in adhesives, inks, decorative coatings, varnishes, epoxies, aliphatic and aromatic solvent borne coatings, powder coatings, t...Vea Mas MONORAL® 8500 is an organically modified derivative of castor oil that comes in the form of a white powder. This product is used in adhesives, inks, decorative coatings, varnishes, epoxies, aliphatic and aromatic solvent borne coatings, powder coatings, traffic paint, and solvent free coatings. Vea Menos | |
| MONORAL® 8700 | HS CHEM CO.,LTD | MONORAL® 8700 is a micronized amide wax powder. This product is often used in heavy duty protective coatings, top coats, primers, and solvent based anti-corrosion coatings. | |
| MONORAL® 8800 | HS CHEM CO.,LTD | MONORAL® 8800 is a micronized amide wax powder. This product is used in heavy duty protective coatings, top coats, primers, and solvent based anti-corrosion coatings. | |
| MONORAL® 8900 | HS CHEM CO.,LTD | MONORAL® 8900 is a micronized amide wax powder. This product is used in heavy duty protective coatings and solvent based anti-corrosion coatings. | |
| MONORAL® A630-20M | HS CHEM CO.,LTD | MONORAL® A630-20M is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product can impart excellent anti-sagging and anti-settling properties and is applicable to most solvent based synthetic resin coatings in the aliphatic...Vea Mas MONORAL® A630-20M is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product can impart excellent anti-sagging and anti-settling properties and is applicable to most solvent based synthetic resin coatings in the aliphatic system. It is also used in heavy duty, general industrial, decorative, and wood finishes. Vea Menos | |
| MONORAL® A670-20M | HS CHEM CO.,LTD | MONORAL® A670-20M is a synthetic polyamide wax dispersed in a mixture of mineral spirits and low odor alcohol. This product imparts excellent anti-sagging and anti-settling properties and is applicable to most aliphatic solvent based synthetic resin coati...Vea Mas MONORAL® A670-20M is a synthetic polyamide wax dispersed in a mixture of mineral spirits and low odor alcohol. This product imparts excellent anti-sagging and anti-settling properties and is applicable to most aliphatic solvent based synthetic resin coatings. It is also used in oil modified urethane coatings, heavy duty, general industrial, decorative, and wood finishes. Vea Menos | |
| MONORAL® A680-20M | HS CHEM CO.,LTD | MONORAL® A680-20M is a synthetic polyamide wax dispersed in a mixture of mineral spirits and low odor alcohol. This product imparts excellent anti-sagging and anti-settling properties and is applicable to most aliphatic solvent based synthetic resin coati...Vea Mas MONORAL® A680-20M is a synthetic polyamide wax dispersed in a mixture of mineral spirits and low odor alcohol. This product imparts excellent anti-sagging and anti-settling properties and is applicable to most aliphatic solvent based synthetic resin coatings. It is also used in heavy duty, general industrial, decorative, and wood finishes. Vea Menos | |
| MONORAL® A690-20M | HS CHEM CO.,LTD | MONORAL® A690-20M is a synthetic polyamide wax that is applicable to most solvent based synthetic resin coatings in the aliphatic system. This product is often used in general industrial, decorative, wood finishes and architectural coatings with low odor ...Vea Mas MONORAL® A690-20M is a synthetic polyamide wax that is applicable to most solvent based synthetic resin coatings in the aliphatic system. This product is often used in general industrial, decorative, wood finishes and architectural coatings with low odor requirements. Vea Menos | |
| MONORAL® AF3200 | HS CHEM CO.,LTD | MONORAL® AF3200 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product imparts excellent anti-sagging and anti-settling properties and is used in architectural and industrial coatings as well as resins in aliphatic sy...Vea Mas MONORAL® AF3200 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product imparts excellent anti-sagging and anti-settling properties and is used in architectural and industrial coatings as well as resins in aliphatic systems. Vea Menos | |
| MONORAL® BA3400 | HS CHEM CO.,LTD | MONORAL® BA3400 is a synthetic polyamide wax dispersed in HAPs free solvent that comes in the form of a white paste. This product develops excellent anti-sagging properties and is used in heavy duty, industrial, and architectural coatings. | |
| MONORAL® ED | HS CHEM CO.,LTD | MONORAL® ED is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in woo...Vea Mas MONORAL® ED is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in wood coatings, automotive clear topcoats as well as industrial, architectural, and heavy duty coatings. Vea Menos | |
| MONORAL® ED-10X | HS CHEM CO.,LTD | MONORAL® ED-10X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in...Vea Mas MONORAL® ED-10X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in wood coatings, automotive clear topcoats as well as industrial, architectural, and heavy duty coatings. Vea Menos | |
| MONORAL® ED-15X | HS CHEM CO.,LTD | MONORAL® ED-15X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in...Vea Mas MONORAL® ED-15X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in wood coatings, automotive clear topcoats as well as industrial, architectural, and heavy duty coatings. Vea Menos | |
| MONORAL® NT3300 | HS CHEM CO.,LTD | MONORAL® NT3300 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product imparts excellent anti-sagging and anti-settling properties and is applicable to low toxic solvent systems. It is used in heavy duty coatings, ind...Vea Mas MONORAL® NT3300 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product imparts excellent anti-sagging and anti-settling properties and is applicable to low toxic solvent systems. It is used in heavy duty coatings, industrial coatings, and architectural coatings. Vea Menos | |
| MONORAL® SD | HS CHEM CO.,LTD | MONORAL® SD is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in woo...Vea Mas MONORAL® SD is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in wood coatings, automotive clear topcoats as well as industrial, architectural, and heavy duty coatings. Vea Menos | |
| MONORAL® SD-10X | HS CHEM CO.,LTD | MONORAL® SD-10X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in...Vea Mas MONORAL® SD-10X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is used in wood coatings, automotive clear topcoats as well as industrial, architectural, and heavy duty coatings. Vea Menos | |
| MONORAL® SD-15X | HS CHEM CO.,LTD | MONORAL® SD-15X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. This product ...Vea Mas MONORAL® SD-15X is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. This product is used in wood coatings, automotive clear topcoats as well as industrial, architectural, and heavy duty coatings. Vea Menos | |
| Nicron® 403 | Imerys Performance Additives | Talco laminar de alta Poliuretano reza que mejora la resistencia y flexibilidad de la película y proporciona propiedades de barrera en revestimientos base arquitectónicos e industriales, para mejorar la resistencia a la corrosión y capacidad de bloqueo ...Vea Mas Talco laminar de alta Poliuretano reza que mejora la resistencia y flexibilidad de la película y proporciona propiedades de barrera en revestimientos base arquitectónicos e industriales, para mejorar la resistencia a la corrosión y capacidad de bloqueo de mancha. Vea Menos | |
| Raybo 158 VisCon HF | Raybo Chemical | Raybo 158 VisCon HF is a coating additive in an amber liquid form. This product is most commonly used to control viscosity and sag in solvent-based and water-reducible coating system applications. | |
| Raybo 38 NilFo | Raybo Chemical | Raybo 38 NilFo is a controllable coating additive in a tan paste form. This product is most commonly used to control sagging and settling in solvent-based coating applications. | |
| Raybo 6 AntiSag | Raybo Chemical | Raybo 6 AntiSag is a dispersing agent in a liquid form. This product is most commonly used to control sag in solvent-based ink and coating system applications. | |
| Raybo 72 VisCon | Raybo Chemical | Raybo 72 VisCon is a coating additive in an amber liquid form. This product is most commonly used to control viscosity and sag in solvent-based and water-reducible coating system applications. | |
| Raybo 94 Susperse B | Raybo Chemical | Raybo 94 Susperse B is an anionic surfactant with a solids content of 75%. This product is most commonly used in difficult-to-disperse pigment applications such as carbon black and phthalocyanine blue, as well as to improve sag resistance and pigment sus...Vea Mas Raybo 94 Susperse B is an anionic surfactant with a solids content of 75%. This product is most commonly used in difficult-to-disperse pigment applications such as carbon black and phthalocyanine blue, as well as to improve sag resistance and pigment suspension in coating manufacturing applications. Vea Menos | |
| RHEOBYK-410 | BYK | Aditivo reológico líquido (usado también para la post-adición en sistemas transmitidos por solvente y los y sin solvente). Solución de una urea modificada. | |
| RHEOBYK-411 | BYK | Aditivo reológico líquido (usado también para la post-adición en sistemas transmitidos por solvente y los sin solvente). Solución de una urea modificada. | |
| RHEOBYK-420 | BYK | Aditivo reológico líquido para revestimientos y concentrados de pigmento, transmitidos por agua. Solución de una urea modificada. | |
| RHEOBYK-425 | BYK | Aditivo reológico para los sistemas acuosos y los solubles en agua. Solución de un poliuretano modificado por urea. | |
| RHEOBYK-430 | BYK | Aditivo líquido del control de reología para sistemas transmitidos por solvente. Solución de una poliamida polar mediana de molecularidad alta, urea modificada. | |
| RHEOBYK-431 | BYK | Aditivos líquidos de control de reología para sistemas transmitidos por solvente. Solución de una poliamida polar, urea-modificada, de molecularidad alta. | |
| RHEOBYK-440 | BYK | RHEOBYK-440 is a liquid rheology additive based on a polyamide to improve the anti-sagging and anti-settling properties as well as the effect pigment orientation in aqueous coating systems. Extremely shear-thinning. | |
| Silverline® 403 | Imerys Performance Additives | De Poliuretano reza elevada, talco laminar. Silverline 002 es un aditivo de superior control de anti-endurecimiento/flujo, utilizado donde se requieran características de manejo mejoradas. | |
| Talc Powder DY1 | Hainan Zhongxin Chemical Co., Ltd. | Talc Powder DY1, synonymous with hydrous magnesium silicate (H2Mg3O12Si4), is a paint grade fine white powder with a mesh size of 325MESH. It is primarily used in the production of paint and coatings. |
