| BECKOPOX™ EH 2162w/75WA | Allnex | BECKOPOX™ EH 2162w/75WA is an aliphatic polyamine adduct. It's also a hardener for water-reducible coatings on mineral and metallic substrates. | Request Sample |
| BECKOPOX™ EH 613w/80WA | Allnex | Aducto alifático de poliamina sin ácido, transmitido por agua. Endurecedor altamente reactivo para revestimientos reducibles al agua en los substratos metálicos minerales donde se hace importante el curado y liberación de agua rápidos. | Request Sample |
| D.E.H.™ 20 | Univar Solutions | D.E.H.™ 20 is an economical diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It is used for civil engineering applications, maintenance paints, and in ...Vea Mas D.E.H.™ 20 is an economical diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It is used for civil engineering applications, maintenance paints, and in the manufacture of epoxy-amine adducts. It is also used in adhesives, epoxy composite applications and as an accelerator for polyamide curing agents. Vea Menos | |
| D.E.H.™ 24 | Univar Solutions | D.E.H.™ 24 is an economical aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It provides lower vapor hazard to workers due to its higher boiling poi...Vea Mas D.E.H.™ 24 is an economical aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It provides lower vapor hazard to workers due to its higher boiling point, and is used for maintenance paints, the manufacture of epoxyamine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. Vea Menos | |
| D.E.H.™ 29 | Univar Solutions | D.E.H.™ 29 is an economical, complex mixture of linear, branched and cyclic ethylene amines, offering more flexibility versus DETA, TETA, and TEPA type materials. It is recommended for epoxy coal tar systems, patch kits, two-pack adhesives, and other appl...Vea Mas D.E.H.™ 29 is an economical, complex mixture of linear, branched and cyclic ethylene amines, offering more flexibility versus DETA, TETA, and TEPA type materials. It is recommended for epoxy coal tar systems, patch kits, two-pack adhesives, and other applications where color is not a limitation. In adhesives, it yields much higher peel strength than DETA or TETA at comparable gel times and lower cost. Vea Menos | |
| D.E.H.™ 39 | Univar Solutions | D.E.H.™ 39 is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP), providing a short pot-life and cures in minutes with liquid epoxy resins. It is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil...Vea Mas D.E.H.™ 39 is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP), providing a short pot-life and cures in minutes with liquid epoxy resins. It is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil engineering applications and as an accelerator for polyamide curing agents. In electrical applications, it is used for casting, potting and encapsulation. It is often used for epoxy composite materials. Vea Menos | |
| D.E.H.™ 4909 | Univar Solutions | D.E.H.™ 4909 is a modified polyamine fast curing in thin films, excellent wetting properties on concrete surface, excellent adhesion on concrete. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for low temperature applications...Vea Mas D.E.H.™ 4909 is a modified polyamine fast curing in thin films, excellent wetting properties on concrete surface, excellent adhesion on concrete. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for low temperature applications, and concrete primers. Manufactured without benzyl alcohol and nonylphenol. Vea Menos | |
| D.E.H.™ 52 | Univar Solutions | D.E.H.™ 52 is a viscous aliphatic polyamine epoxy adduct curing agent combines polyamine properties such as short pot life and rapid cure at room temperature with those of typical polyamide curing agents including easy handling, convenient viscosity and m...Vea Mas D.E.H.™ 52 is a viscous aliphatic polyamine epoxy adduct curing agent combines polyamine properties such as short pot life and rapid cure at room temperature with those of typical polyamide curing agents including easy handling, convenient viscosity and mixing rates with liquid epoxy resins, however it is much less hygroscopic than standard polyamines. Applications include maintenance paints, in two-pack adhesives, civil engineering, castings and hand lay-up laminates and particularly suitable for colorless systems. Vea Menos | |
| D.E.H.™ 530E32 | Univar Solutions | D.E.H.™ 530E32 is a cycloaliphatic amine cure agent for epoxy resin systems with low color, blush-free, especially designed for ambient and low temperature cure applications. | |
| D.E.H.™ 546 | Univar Solutions | D.E.H.™ 546 is a low viscosity modified cycloaliphatic amine intended for ambient curing of liquid epoxy resins, providing good corrosion protection. Applications include industrial flooring, primers and sealers. | |
| D.E.H.™ 554 | Univar Solutions | D.E.H.™ 554 is a modified cycloaliphatic amine used as a curing for epoxy resins and specially designed for applications requiring self leveling. It offers a good low temperature cure and low viscosity, potential high gloss, good color stability, low visc...Vea Mas D.E.H.™ 554 is a modified cycloaliphatic amine used as a curing for epoxy resins and specially designed for applications requiring self leveling. It offers a good low temperature cure and low viscosity, potential high gloss, good color stability, low viscosity. Typical applications include self leveling flooring, concrete sealers and high solid coatings. Vea Menos | |
| D.E.H.™ 561 | Univar Solutions | D.E.H.™ 561 is a low viscosity, formulated, modified cycloaliphatic amine with low color and fast cure at low temperatures, is specially designed for use in high solids coatings, self leveling and screed floors. | |
| D.E.H.™ 570 | Univar Solutions | D.E.H.™ 570 is a low viscosity modified cycloaliphatic amine hardener. DEH 570 imparts high strength and excellent chemical resistance. | |
| D.E.H.™ 58 | Univar Solutions | D.E.H.™ 58 is extremely reactive with liquid epoxy resins at room temperature and is used in maintenance paints, 2-pack adhesives, civil engineering, castings and hand lay-up laminates. D.E.H.™ 58 Curing Agent is particularly suitable for colorless coatin...Vea Mas D.E.H.™ 58 is extremely reactive with liquid epoxy resins at room temperature and is used in maintenance paints, 2-pack adhesives, civil engineering, castings and hand lay-up laminates. D.E.H.™ 58 Curing Agent is particularly suitable for colorless coatings or adhesive systems. Vea Menos | |
| D.E.H.™ 582 | Univar Solutions | D.E.H.™ 582 is a cycloaliphatic amine hardener used as a curing agent for epoxy resins resulting in a non-blushing product with good water spot resistance and excellent chemical resistance. | |
| D.E.H.™ 598B | Univar Solutions | D.E.H.™ 598B is a modified aliphatic amine hardener used as a curing agent for epoxy resins for rapid-set and low temperatures cure systems with high gloss and high strength. | |
| VESTAMIN® TMD | Evonik Operations GmbH, BL Crosslinkers | VESTAMIN® TMD es una diamina alifática ramificada. Es un líquido incoloro con partes aproximadamente iguales de los isómeros de diamina 2,2,4- y 2,4,4-trimetil hexametileno. Este grado es soluble en una amplia gama de solventes orgánicos polares, incluid...Vea Mas VESTAMIN® TMD es una diamina alifática ramificada. Es un líquido incoloro con partes aproximadamente iguales de los isómeros de diamina 2,2,4- y 2,4,4-trimetil hexametileno. Este grado es soluble en una amplia gama de solventes orgánicos polares, incluidos ésteres y alcoholes. Las aplicaciones más comunes incluyen la producción de endurecedores para sistemas de resina epóxi y síntesis de poliamidas y poliuretano. Los grados de VESTAMIN® son agentes curadores para sistemas de resina epóxi, extensores de cadenas para sistemas poliuretanos, materia prima para poliamidas y aceleradores para sistemas poliuretanos que se curan con humedad. Vea Menos | Request Sample |
| WorléeDur H 380 M | Worlée-Chemie G.m.b.H. | Un disolvente basado en amina modificada aducto epoxi para la formulación de disolventes de pinturas bases y capas superiores. |
