| 4070-M-60 L/S Alkyd Resin | Gabriel Performance Products | 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints. | |
| 4070-M-70 ALKYD RESIN | Gabriel Performance Products | 4070-M-70 ALKYD RESIN is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery primers/enamels. This product conforms to Federal Specification TT-R-26D, Type I, Class A. | |
| 4412-M-50 M/S Alkyd Resin | Gabriel Performance Products | 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cu...Vea Mas 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cured with U-F or melamine resins with excellent results. Vea Menos | |
| 4412-V-50 Alkyd Resin | Gabriel Performance Products | 4412-V-50 Alkyd Resin is a medium oil alkyd resin for interior or exterior use. It is suitable for air drying or baking coatings. | |
| 4653-V-50 Rosin Modified Alkyd | Gabriel Performance Products | 4653-V-50 Rosin Modified Alkyd is a fast drying rosin modified alkyd supplied at 50% non-volatile in VM&P Naphtha. This product can be used for fast drying, low cost enamels and primers. | |
| 4714-P-75 Chain Stopped Water Soluble Alkyd Resin | Gabriel Performance Products | 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solve...Vea Mas 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solvent ratio in finished product should be 80:20 ratio of water to co-solvent by volume. Vea Menos | |
| 4724-XT-80 High Solids VT Alkyd Copolymer Resin | Gabriel Performance Products | 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs. | |
| 4770-X-60 Short Oil Alkyd Resin | Gabriel Performance Products | 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability. | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...Vea Mas 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. Vea Menos | |
| 4915-PMA-85 High Solids Short Oil Alkyd | Gabriel Performance Products | 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents. | |
| 4929-X-50 Silicone Modified Short Oil Alkyd | Gabriel Performance Products | 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. | |
| 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd | Gabriel Performance Products | 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry. | |
| 4947-SP-75 Water Reducible Alkyd | Gabriel Performance Products | 4947-SP-75 Water Reducible Alkyd is designed for air dry, force dry, or low bake application. This resin is for use in all colors including whites and pastels, and also in primers. It will give good corrosion and water resistance when properly formulated. | |
| 4971-BC-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank...Vea Mas 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank, flow coat, and spray applications. Vea Menos | |
| 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil | Gabriel Performance Products | 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil can be used for air dry, force dry, and baking applications and is intended for industrial and OEM coatings. | |
| 4986-V-50 VT Modified Alkyd Resin | Gabriel Performance Products | 4986-V-50 VT Modified Alkyd Resin is a fast drying general purpose alkyd resin which features a slow solvent reduction curve. Typical uses include drum enamels, aerosol finishes, and fast drying trade sale enamels. | |
| 4987-V-60VT Modified Alkyd Resin | Gabriel Performance Products | 4987-V-60VT Modified Alkyd Resin is a fast drying vinyl toluene modified alkyd resin intended for use in fast drying primers and enamels. Its adhesion and flexibility are very good and it can be used on a variety of surfaces including wood and metal. | |
| 4996 Long Oil Alkyd Resin | Gabriel Performance Products | 4996 Long Oil Alkyd Resin is intended for use as a plasticizer for hot melt coatings. | |
| 5009-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5009-BS-70 Water Reducible Alkyd Resin is a general purpose resin designed for air dry, force dry, or low temperature bake applications. This product is supplied at 70% non-volatiles. | |
| 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and...Vea Mas 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and good gloss retention. Vea Menos | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5018-X-50 Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retenti...Vea Mas 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retention. Vea Menos | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5063-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...Vea Mas 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. Vea Menos | |
| 5113-V-60 Medium Oil Alkyd | Gabriel Performance Products | 5113-V-60 Medium Oil Alkyd is suitable for use in traffic and road marking paints. | |
| 5121-BC-85 Water Reducible Alkyd Resin | Gabriel Performance Products | 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an ...Vea Mas 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. Vea Menos | |
| ADDITOL® XW 6535 | Allnex | Resina de pulido universal para las pinturas decorativas de sb y wb de bajo VOC (Compuesto Organico Volatil). | Request Sample |
| ALKFORT 3060 | Oswaldo Cruz Quimica | ALKFORT 3060 resin is a short alkyd resin in soybean oil. It offers good adhesion, flexibility, durability, and rapid curing. This product is recommended for industrial paints, synthetic systems, polyurethanes, and varnishes. | |
| ALKFORT 3061 | Oswaldo Cruz Quimica | ALKFORT 3061 is a short soybean oil alkyd resin, with medium viscosity. Its properties include good adhesion, flexibility, durability and rapid curing. It was developed appropriately for industrial paints, synthetic systems, and polyurethanes, and is also...Vea Mas ALKFORT 3061 is a short soybean oil alkyd resin, with medium viscosity. Its properties include good adhesion, flexibility, durability and rapid curing. It was developed appropriately for industrial paints, synthetic systems, and polyurethanes, and is also suitable for line of polyurethane varnishes. Vea Menos | |
| ALKFORT 3066 | Oswaldo Cruz Quimica | ALKFORT 3066 is a short alkyd resin dehydrated castor oil (DCO). Its properties include excellent adhesion, luster, durability and excellent resistance. This product is recommended for industrial paints, synthetic systems, polyurethanes, and automotive en...Vea Mas ALKFORT 3066 is a short alkyd resin dehydrated castor oil (DCO). Its properties include excellent adhesion, luster, durability and excellent resistance. This product is recommended for industrial paints, synthetic systems, polyurethanes, and automotive enamels with optimal properties. Vea Menos | |
| ALKFORT 3250 | Oswaldo Cruz Quimica | ALKFORT 3250 is a medium alkyd resin in soya oil. It offers excellent brightness, weather resistance, excellent durability, and compatibility with other resins. This product is used for grinding pigments, manufacturing of industrial and decorative synthet...Vea Mas ALKFORT 3250 is a medium alkyd resin in soya oil. It offers excellent brightness, weather resistance, excellent durability, and compatibility with other resins. This product is used for grinding pigments, manufacturing of industrial and decorative synthetic enamels, and is also suitable for formulations for air- and kiln-drying enamels. It also shows great results in enamels for agricultural implements. Vea Menos | |
| ALKFORT 3251 | Oswaldo Cruz Quimica | ALKFORT 3251 is a medium alkyd resin in soybean oil with medium viscosity. It offers excellent brightness, weather resistance, excellent durability, and compatibility with other resins. This product is used for grinding pigments, manufacturing of industri...Vea Mas ALKFORT 3251 is a medium alkyd resin in soybean oil with medium viscosity. It offers excellent brightness, weather resistance, excellent durability, and compatibility with other resins. This product is used for grinding pigments, manufacturing of industrial and decorative synthetic enamels, and is also suitable for formulations for air- and kiln-drying enamels. It also shows great results in enamels for agricultural implements. Vea Menos | |
| ALKFORT 3470 | Oswaldo Cruz Quimica | ALKFORT 3470 is a long alkyd resin in soya oil. Its properties include excellent leveling, high hardness and brilliance, great applicability to brush, and weather resistance. Developed appropriately for decorative paints with excellent brushability, this ...Vea Mas ALKFORT 3470 is a long alkyd resin in soya oil. Its properties include excellent leveling, high hardness and brilliance, great applicability to brush, and weather resistance. Developed appropriately for decorative paints with excellent brushability, this product is also suitable for grinding pigments. Vea Menos | |
| ALKFORT 3471 | Oswaldo Cruz Quimica | ALKFORT 3471 is a long alkyd resin soybean oil with a greater viscosity than ALKORF 3470. Its properties include excellent flatness, high hardness and gloss, good applicability brush, and weather resistance. Developed appropriately for decorative paints w...Vea Mas ALKFORT 3471 is a long alkyd resin soybean oil with a greater viscosity than ALKORF 3470. Its properties include excellent flatness, high hardness and gloss, good applicability brush, and weather resistance. Developed appropriately for decorative paints with excellent brushability, it is also suitable for grinding pigments. Vea Menos | |
| ALKFORT 3480 | Oswaldo Cruz Quimica | ALKFORT 3480 is a long alkyd resin soybean oil with high solids. Its properties include excellent leveling, high hardness and brilliance, great brushability, and weather resistance. Developed appropriately for decorative paints with brushability, it is al...Vea Mas ALKFORT 3480 is a long alkyd resin soybean oil with high solids. Its properties include excellent leveling, high hardness and brilliance, great brushability, and weather resistance. Developed appropriately for decorative paints with brushability, it is also suitable for grinding pigments. Vea Menos | |
| ALKFORT 3660 | Oswaldo Cruz Quimica | ALKFORT 3660 alkyd resin is a short soybean oil, modified with reactive phenolic resin and rosin. It offers quick drying, high hardness, and compatibility with other resins. This product is suitable for synthetic primers for rapid drying, and is also indi...Vea Mas ALKFORT 3660 alkyd resin is a short soybean oil, modified with reactive phenolic resin and rosin. It offers quick drying, high hardness, and compatibility with other resins. This product is suitable for synthetic primers for rapid drying, and is also indicated for paints for industrial synthetic drums and agricultural implements. Vea Menos | |
| ALKFORT 3661 | Oswaldo Cruz Quimica | ALKFORT 3661 alkyd resin is a short soybean oil, modified with reactive phenolic resin and rosin. Its properties include quick drying, high hardness, and compatibility with other resins. This product is suitable for synthetic primers for rapid drying, and...Vea Mas ALKFORT 3661 alkyd resin is a short soybean oil, modified with reactive phenolic resin and rosin. Its properties include quick drying, high hardness, and compatibility with other resins. This product is suitable for synthetic primers for rapid drying, and is also indicated for paints for industrial synthetic drums and agricultural implements. Vea Menos | |
| Alkipol 2250-50 H | Polidur San Luis | Resina alquídica corta en aceite al 80 % en butanol diluible con agua. Propiedades : Solubilidad completa en agua luego de neutralizar con aminas. Buen curado y dureza al curar con melamina metilada una vez curado las propiedades generales son similares a...Vea Mas Resina alquídica corta en aceite al 80 % en butanol diluible con agua. Propiedades : Solubilidad completa en agua luego de neutralizar con aminas. Buen curado y dureza al curar con melamina metilada una vez curado las propiedades generales son similares a los sistemas al solvente. Aplicaciones : Fondos y esmaltes horneables diluibles con agua. Vea Menos | |
| Alkipol 307-50 T | Polidur San Luis | Resina alquídica corta en aceite al 80 % en butanol diluible con agua. Propiedades : Solubilidad completa en agua luego de neutralizar con aminas. Buen curado y dureza al curar con melamina metilada una vez curado las propiedades generales son similares a...Vea Mas Resina alquídica corta en aceite al 80 % en butanol diluible con agua. Propiedades : Solubilidad completa en agua luego de neutralizar con aminas. Buen curado y dureza al curar con melamina metilada una vez curado las propiedades generales son similares a los sistemas al solvente. Aplicaciones : Especificaciones : Fondos y esmaltes horneables diluibles con agua. Vea Menos | |
| Alkipol 380-50 T | Polidur San Luis | Alkipol 380-50 T is a medium oil alkyd resin modified with TDI at 50% in xilol-naphta. This product has excellent air drying properties, excellent final film hardness, good water and salt fog resistance and excellent dielectric properties. Alkipol 380-50 ...Vea Mas Alkipol 380-50 T is a medium oil alkyd resin modified with TDI at 50% in xilol-naphta. This product has excellent air drying properties, excellent final film hardness, good water and salt fog resistance and excellent dielectric properties. Alkipol 380-50 T has applications in fast air drying enamels, varnishes for electrical uses, fast air dry corrosion resistant primers and is an air dry modifier for medium oil alkyd resins. Vea Menos | |
| Alkipol 434-50 A | Polidur San Luis | Resina alquídica mediana en aceite al 50% en aguarrás. Propiedades : Buena resistencia al amarilleo. % de metal sobre resina sólida, Buen secado y dureza final de película. Excelente caida de viscosidad en aguarrás. Para mejorar pintabilidad agregar Alkip...Vea Mas Resina alquídica mediana en aceite al 50% en aguarrás. Propiedades : Buena resistencia al amarilleo. % de metal sobre resina sólida, Buen secado y dureza final de película. Excelente caida de viscosidad en aguarrás. Para mejorar pintabilidad agregar Alkipol 470-70A. Aplicaciones : Esmaltes sintéticos económicos blancos o de color. Fondos anticorrosivos. Esmaltes de secado forzado al horno. Vea Menos | |
| Alkipol 469-100 | Polidur San Luis | Resina alquídica larga en aceite al 100 % sólidos. Propiedades : Buena humectacion de pigmentos. Compatible con gran variedad de resinas derivadas de colofonia. Aplicaciones : Vehículo de molienda. Plastificante en pinturas de demarcación vial. | |
| ALQUIMEX 109 | Polimeros Sinteticos, S.A de C.V | The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, e...Vea Mas The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, enamels for repainting automobiles of high brightness, resistance to yellowing, and enamels for industrial finishes. Vea Menos | |
| ALQUIMEX CC-60X | Polimeros Sinteticos, S.A de C.V | The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lac...Vea Mas The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lacquers for furniture, and special enamels. Vea Menos | |
| ALQUIMEX LS-70GN | Polimeros Sinteticos, S.A de C.V | Alkyd resin without modifying of long oil, dilute in naphtha. For the architectonic enamel formulation of inner and outer drying to the domestic air, easy application with brush, and excellent durability in exteriors. | |
| ALQUIMEX S-50GN | Polimeros Sinteticos, S.A de C.V | Medium oil length Alkyd resin of soybean, diluted in naphtha. For domestic enamel formulation of drying of 4 hours max., provides excellent appearance and outer resistance wing. | |
| ALQUIMEX S-50T | Polimeros Sinteticos, S.A de C.V | Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requi...Vea Mas Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requirements with drying, adhesion, flexibility, abrasion, exudation and resistance to the gasoline, as well as the resistance outdoors. Vea Menos | |
| ALQUIMEX SC-60X | Polimeros Sinteticos, S.A de C.V | The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in...Vea Mas The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in solution and resins of urea, and melamine, to obtain finished from greater hardness by baked systems. Vea Menos | |
| ALQUIMEX SC-70X | Polimeros Sinteticos, S.A de C.V | Alkyd resin cut chain of soybean oil. Fast drying to the touch, and offers good gloss and leveling. Recommended for the formulation of fast drying enamels, industrial finishes and wood funds for two components. | |
| ALQUIMEX SE–50X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with styrene monomer, diluted in xylene. It owns excellent properties in the enamel elaboration of drying to the air, distributes excellent brightness, hardness, good retention of the color and resistance to the water. | |
| ALQUIMEX SVT-60X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with monomer of vinyl toluene, diluted in xylene. Enamel for application with brush and/or by aspersion, enamels for tools, and primary, industrial enamels for drying to the air and by low baking. | |
| ATAMUL® 1000 | ATA Tensoativos Indústria e Comércio de Tensoativos Ltda | ATAMUL® 1000 is a modified polymer. It is a new generation of emulsified polymeric for alkyd resins. This product enables the manufacture of nail polish emulsified with water without compromising performance versus conventional glazes. | |
| BENALAC 5660 | Benasedo | BENALAC 5660 is an air-dryng long-oil alkyd resin specially designed for “off-set inks”. It is endowed with good setting and drying characteristics, excellent wetting power, colour development and scuff resistance, flow and non- yellowing properties. | |
| Benasol 1804 | Benasedo | Benasol 1804 is a Linseed - Tung Phenolic oil, with a 68% oil content. It contains 70% solids, Z1-Z2 visc. [G.H], 6-12 A.V. solids, and a 9 color [G.H.] max. It is used in anticorrosive primers, enamels and clear finishes with excellent resistance to mari...Vea Mas Benasol 1804 is a Linseed - Tung Phenolic oil, with a 68% oil content. It contains 70% solids, Z1-Z2 visc. [G.H], 6-12 A.V. solids, and a 9 color [G.H.] max. It is used in anticorrosive primers, enamels and clear finishes with excellent resistance to marine corrosion. Vea Menos | |
| BENASOL 4377 | Benasedo | BENASOL 4377 is a low viscosity, plasticizing, non yellowing alkyd resin suitable to produce nitrocellulose wood lacquers, endowed with very fast solvent release, high build-up flow, gloss and lifting resistance. | |
| Benasol 5097 in White Spirit | Benasedo | Benasol 5097 in White Spirit is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. It is made from Linseed - Tung Phenolic oil and has an oil content of 42%. This product contains 50% solids, a viscosity [G.H.] of...Vea Mas Benasol 5097 in White Spirit is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. It is made from Linseed - Tung Phenolic oil and has an oil content of 42%. This product contains 50% solids, a viscosity [G.H.] of X-Z, an A.V. solids amount of 6-15, and a color [G.H] max. of 9. Its application is for air. Vea Menos | |
| Benasol 5097 in Xylene | Benasedo | Benasol 5097 in Xylene is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. This product has an oil content of 42%, a solids amount of 50%, an A.V. solids amount of 6-15, and a viscosity [G.H.] of U-W. Its applic...Vea Mas Benasol 5097 in Xylene is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. This product has an oil content of 42%, a solids amount of 50%, an A.V. solids amount of 6-15, and a viscosity [G.H.] of U-W. Its application is for air. Vea Menos | |
| BENASOL A 240 | Benasedo | BENASOL A 240 is a very fast curing binder suitable for two pack wood lacquers, sealers and top coats, where it shows good sandability hardness and filling properties. It has excellent lifting resistance and good compatibility with nitrocellulose. | |
| Benasol AS 280 | Benasedo | Benasol AS 280 is used in fast air-drying and low-bake enamels with excellent chemical resistance. It is made from soya oil and has a 28% oil content. It contains 60% solids, has a viscosity [G.H.] of Y-Z1, an A.V. solids amount of 6-15, and a colour [G.H...Vea Mas Benasol AS 280 is used in fast air-drying and low-bake enamels with excellent chemical resistance. It is made from soya oil and has a 28% oil content. It contains 60% solids, has a viscosity [G.H.] of Y-Z1, an A.V. solids amount of 6-15, and a colour [G.H.] maximum of 5. This product has applications for air, bake, nitro and catalyze. Vea Menos | |
| BENASOL AS 308 in XYLENE | Benasedo | BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlor...Vea Mas BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. Vea Menos | |
| BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) | Benasedo | BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in ...Vea Mas BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. Vea Menos | |
| BENASOL AS 3716 | Benasedo | BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber...Vea Mas BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. Vea Menos | |
| Benasol AS 379 | Benasedo | Benasol AS 379 is used in fast air-drying white and coloured enamels for industrial applications. It is made from special fatty acids with 43% oil content and 60% solids content. This product has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-12,...Vea Mas Benasol AS 379 is used in fast air-drying white and coloured enamels for industrial applications. It is made from special fatty acids with 43% oil content and 60% solids content. This product has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-12, and a color [G.H.] maximum of 5. It has application for air. Vea Menos | |
| BENASOL AS 452 | Benasedo | BENASOL AS 452 is an air-drying low-viscosity, non-yellowing alkyd resin especially modified so to guarantee very good wetting properties with pigments, fillers and wide compatibility with various binder types used in different formulations. | |
| BENASOL AS 453 | Benasedo | BENASOL AS 453 is an air-drying low-viscosity, non-yellowing alkyd resin especially modified so to guarantee very good wetting properties with pigments, fillers and wide compatibility with various binder types used in different formulations. | |
| Benasol B1 | Benasedo | Benasol B1 is used in urethane two-component mat finishes and sealers with high reactivity and easy sandability, and it has nitro and catalyze applications. This product contains vegetable fatty acids, with 30% oil content and a 50% solids amount. It has ...Vea Mas Benasol B1 is used in urethane two-component mat finishes and sealers with high reactivity and easy sandability, and it has nitro and catalyze applications. This product contains vegetable fatty acids, with 30% oil content and a 50% solids amount. It has a viscosity [G.H.] of X-Y, an A.V. solids amount of 6-15, a color [G.H.] max. of 5, and an OH solids of 2.6-2.8%. Vea Menos | |
| Benasol C 300 | Benasedo | Benasol C 300 is used in non-yellowing baking enamels, polyurethane finishes and nitrocellulose lacquers. It contains coconut fatty acids, with a 33% oil content. This product has a 60% solids content, a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of...Vea Mas Benasol C 300 is used in non-yellowing baking enamels, polyurethane finishes and nitrocellulose lacquers. It contains coconut fatty acids, with a 33% oil content. This product has a 60% solids content, a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-15, and an OH solids of 2.8-3.0%. Benasol C 300 has bake, nitro and catalyze applications. Vea Menos | |
| BENASOL CO 34 | Benasedo | BENASOL CO 34 is an alkyd resin with a particular molecular structure,endowed with very fast drying properties, good performances in adhesion,hardness and through-dry. It is suggested to formulate industrial sealer and finishes, i.e. machinery,aerosol ena...Vea Mas BENASOL CO 34 is an alkyd resin with a particular molecular structure,endowed with very fast drying properties, good performances in adhesion,hardness and through-dry. It is suggested to formulate industrial sealer and finishes, i.e. machinery,aerosol enamels,traffic-paints. Vea Menos | |
| Benasol CO 35 in Xylene | Benasedo | Benasol CO 35 in Xylene is used in very fast air-drying enamels for industrial applications and traffic-paints. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z4, a 60% solids amount, an A.V. solids content of 6...Vea Mas Benasol CO 35 in Xylene is used in very fast air-drying enamels for industrial applications and traffic-paints. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z4, a 60% solids amount, an A.V. solids content of 6-15, and a colour [G.H.] of maximum 8. This product has air applications. Vea Menos | |
| Benasol CO 35 in Xylene/Butylacetate | Benasedo | Benasol CO 35 in Xylene/Butylacetate is used in very fast air-drying enamels for industrial applications and traffic-paints, and also has air applications. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z3, a 65...Vea Mas Benasol CO 35 in Xylene/Butylacetate is used in very fast air-drying enamels for industrial applications and traffic-paints, and also has air applications. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z3, a 65% solids amount, an A.V. solids content of 6-15, and a colour [G.H.] of maximum 4. Vea Menos | |
| Benasol CO 37 in BUTYL ACETATE | Benasedo | Benasol CO 37 in BUTYL ACETATE is used in very fast non-yellowing air-drying enamels for exterior applications, particularly farm equipment. It is made using special fatty acids and Urethane Aliphatic, and has a 37% oil content. This product contains 65% ...Vea Mas Benasol CO 37 in BUTYL ACETATE is used in very fast non-yellowing air-drying enamels for exterior applications, particularly farm equipment. It is made using special fatty acids and Urethane Aliphatic, and has a 37% oil content. This product contains 65% solids, a viscosity [G.H.] of Z1-Z2, an A.V. solids content of 5-12, and a color [G.H.] maximum of 4. This product has air applications. Vea Menos | |
| Benasol E 114 | Benasedo | Benasol E 114 is used in clear and pigmented finishes for metals and wood. It has a large compatibility with acrylics, polyesters, alkyds, film-forming vehicles and universal tinting-systems. It contains synthetic fatty acids, with a 25% oil amount. This ...Vea Mas Benasol E 114 is used in clear and pigmented finishes for metals and wood. It has a large compatibility with acrylics, polyesters, alkyds, film-forming vehicles and universal tinting-systems. It contains synthetic fatty acids, with a 25% oil amount. This product has a viscosity [G.H.] of Z3-Z5, a colour max. of 3, an OH solids amount of 5.4-5.6, and solids amount of 75%. Benasol E 114 has bake, nitro, and catalyze applications. Vea Menos | |
| Benasol E 184 | Benasedo | Benasol E 184 is made using synthetic fatty acids, with an oil content of 28% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3, an OH solids amount of 2.3-2.5, and a colour [G.H.] maximum of 3. It is used in non-yellowing nitrocell...Vea Mas Benasol E 184 is made using synthetic fatty acids, with an oil content of 28% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3, an OH solids amount of 2.3-2.5, and a colour [G.H.] maximum of 3. It is used in non-yellowing nitrocellulose lacquers for automotive finishes, bake and two-component polyurethane enamels. Benasol E 184 has bake, nitro and catalyze applications. Vea Menos | |
| Benasol F 71 | Benasedo | Benasol F 71 is used in two-component polyurethane gloss or mat finishes and sealers endowed with high transparence, and has catalyze applications. This product is made using hydrogenated castor oil and vegetable fatty acids, with an oil content of 41%. T...Vea Mas Benasol F 71 is used in two-component polyurethane gloss or mat finishes and sealers endowed with high transparence, and has catalyze applications. This product is made using hydrogenated castor oil and vegetable fatty acids, with an oil content of 41%. This product has an OH solids amount of 4.4-4.6, an A.V. solids level of 15-20, a colour [G.H.] maximum of 4, and a viscosity of Z1-Z2. Vea Menos | |
| Benasol F 73 | Benasedo | Benasol F 73 is used in high-quality clear and pigmented polyurethane finishes for wood, and has catalyze applications. It uses hydrogenated castor oil, with a 43% oil and 60% solids content. This product has a 4.5-4.7% OH solids amount, a 15-23 A.V. soli...Vea Mas Benasol F 73 is used in high-quality clear and pigmented polyurethane finishes for wood, and has catalyze applications. It uses hydrogenated castor oil, with a 43% oil and 60% solids content. This product has a 4.5-4.7% OH solids amount, a 15-23 A.V. solids level, and a Y-Z viscosity [G.H.]. Vea Menos | |
| BENASOL FL 34 | Benasedo | BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and dryin...Vea Mas BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is employed for silk – glossy paints or flat one-coat wall finishes, pigmented sealers for wood and primers endowed with easy sanding properties and applied by brush or roll. Wide compatibility with medium-long-oil alkyd resins. Vea Menos | |
| BENASOL FL 40 | Benasedo | BENASOL FL 40 is a non yellowing, slightly thixotropic high-molecular weight alkyd resin, endowed with very good flow, fast drying and wide compatibility with medium-long-oil alkyd resins. In combination with medium-oil alkyd resins, is suitable for seale...Vea Mas BENASOL FL 40 is a non yellowing, slightly thixotropic high-molecular weight alkyd resin, endowed with very good flow, fast drying and wide compatibility with medium-long-oil alkyd resins. In combination with medium-oil alkyd resins, is suitable for sealers, matt and semi-glossy paints employed in building and costruction industries endowed with good outdoor resistance properties. Vea Menos | |
| Benasol FX 97 | Benasedo | Benasol FX 97 is a new Alkyd Resin with 98% solid content, which allows the formulators to stay below the requested limits. Benasol FX 97 is easy to apply by brush and widely compatible with different types of resins; due to its properties, can be used as...Vea Mas Benasol FX 97 is a new Alkyd Resin with 98% solid content, which allows the formulators to stay below the requested limits. Benasol FX 97 is easy to apply by brush and widely compatible with different types of resins; due to its properties, can be used as grinding vehicle and can be completed with a wide range of Long Oil Alkyd Resins. It is also suggested to improve gloss and build-up of conventional paints. Vea Menos | |
| Benasol FX66 | Benasedo | Benasol FX66 is used in high performance non-yellowing paints for interior and exterior, for building industry and "do-it-yourself". It provides very good colour retention, and has air applications. This product uses special unsaturated fatty acids, with ...Vea Mas Benasol FX66 is used in high performance non-yellowing paints for interior and exterior, for building industry and "do-it-yourself". It provides very good colour retention, and has air applications. This product uses special unsaturated fatty acids, with a 67% oil and 70% solids content. This product has a colour [G.H.] maximum of 3, an A.V. solids amount of 6-10, and a viscosity [G.H.] of Z1-Z2. Vea Menos | |
| BENASOL GEL 220 | Benasedo | BENASOL GEL 220 is a soft-gel fast drying thixotropic alkyd resin, endowed with very good flow , body and color ritention. It is employed alone or combined with medium-long oil alkyd resins to formulate enamels, glossy paints, flat one-coat wall finishes ...Vea Mas BENASOL GEL 220 is a soft-gel fast drying thixotropic alkyd resin, endowed with very good flow , body and color ritention. It is employed alone or combined with medium-long oil alkyd resins to formulate enamels, glossy paints, flat one-coat wall finishes or pigmented sealers for wood and “do it Your self”, applied by brush or roller. Vea Menos | |
| BENASOL HS 120 | Benasedo | BENASOL HS 120 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compat...Vea Mas BENASOL HS 120 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compatible with different types of resins, showing excellent wetting properties. Due to its properties, can be used as grinding vehicle and to produce tinting pastes. It is also suggested to improve gloss and build-up of conventional paints. Vea Menos | |
| BENASOL HS 6922 | Benasedo | BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...Vea Mas BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. Vea Menos | |
| BENASOL HS 7100 | Benasedo | BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...Vea Mas BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. Vea Menos | |
| BENASOL HS 7380 | Benasedo | BENASOL HS 7380 is a non yellowing alkyd resin with a particular molecular structure, endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and f...Vea Mas BENASOL HS 7380 is a non yellowing alkyd resin with a particular molecular structure, endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance in compliance with the CE 2004 – 42 requirements for the VOC reduction . Vea Menos | |
| BENASOL HS 75 | Benasedo | BENASOL HS 75 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness and ease of brush application. It is suggested for white and coloured a...Vea Mas BENASOL HS 75 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness and ease of brush application. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. Vea Menos | |
| BENASOL HS 753 | Benasedo | BENASOL HS 753 is a non yellowing alkyd resin , endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. | |
| Benasol HS 754 | Benasedo | Benasol HS 754 is a non yellowing alkyd resin , endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. | |
| BENASOL HS 86 | Benasedo | BENASOL HS 86 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ai...Vea Mas BENASOL HS 86 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. Vea Menos | |
| BENASOL L 50 AV | Benasedo | BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...Vea Mas BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. Vea Menos | |
| BENASOL L 65 | Benasedo | BENASOL L 65 is a long oil, low viscosity alkyd resin,endowed with a very good,trough dryng properties also in thick film, gloss and color retention, hardness,built and brushability. It is suggested for formulating sinthetic enamels, clear and pigmented p...Vea Mas BENASOL L 65 is a long oil, low viscosity alkyd resin,endowed with a very good,trough dryng properties also in thick film, gloss and color retention, hardness,built and brushability. It is suggested for formulating sinthetic enamels, clear and pigmented paints for “ Do it Yourself “ and maintenance, alone or combined with oils urethane modified binders. Vea Menos | |
| Benasol R 126 | Benasedo | Benasol R 126 is used in polyurethane clear finishes and lacquers for wood and metals, with nitro and catalyze applications. It is made using castor oil, with a 53% oil and 60% solids content. This product has an OH solids amount of 5.4-5.6%, a colour [G....Vea Mas Benasol R 126 is used in polyurethane clear finishes and lacquers for wood and metals, with nitro and catalyze applications. It is made using castor oil, with a 53% oil and 60% solids content. This product has an OH solids amount of 5.4-5.6%, a colour [G.H.] maximum of 5, and a viscosity [G.H.] of X-Y. Vea Menos | |
| Benasol R 127 | Benasedo | Benasol R 127 is used in polyurethane high build-up clear finishes and lacquers endowed with good adhesion and flexibility for metals and wood. It is made using castor oil, with a 59% oil and 60% solids content. This product has an OH solids amount of 5.2...Vea Mas Benasol R 127 is used in polyurethane high build-up clear finishes and lacquers endowed with good adhesion and flexibility for metals and wood. It is made using castor oil, with a 59% oil and 60% solids content. This product has an OH solids amount of 5.2-5.4%, a colour [G.H.] maximum of 5, a viscosity [G.H.] of W-Y, and an A.V. solids level of 6-15. Benasol R 127 has catalyze and nitro applications. Vea Menos | |
| BENASOL R 40 D | Benasedo | BENASOL R 40 D is an alkyd resin having good properties of adhesion and flexibility, gloss and colour retention, build – up and flow. It is suitable to produce low temperature bake enamels crosslinked with amino resins. BENASOL R 40 D is also suggested to...Vea Mas BENASOL R 40 D is an alkyd resin having good properties of adhesion and flexibility, gloss and colour retention, build – up and flow. It is suitable to produce low temperature bake enamels crosslinked with amino resins. BENASOL R 40 D is also suggested to formulate clear and pigmented acid- curing coatings and nitrocellulose lacquers. Vea Menos | |
| Benasol RC 45 | Benasedo | Benasol RC 45 is used in polyurethane sealers and mat finishes for wood as well as for nitrocellulose lacquers, and can be used in bake, nitro and catalyze applications. This product uses castor and vegetable fatty acids oil, with a 41% oil and 60% solids...Vea Mas Benasol RC 45 is used in polyurethane sealers and mat finishes for wood as well as for nitrocellulose lacquers, and can be used in bake, nitro and catalyze applications. This product uses castor and vegetable fatty acids oil, with a 41% oil and 60% solids content. Benasol RC 45 as a viscosity [G.H.] of Z1-Z3, an A.V. solids amount of 6-15, and an OH solids level of 4.2-4.4%. Vea Menos | |
| Benasol RC 75 | Benasedo | Benasol RC 75 is used in high-gloss polyurethane finishes and vehicles to improve the general performances of wood systems, with nitro and catalyze applications. It uses castor oil type, with a 78% oil and 80% solids content. This product has an OH solids...Vea Mas Benasol RC 75 is used in high-gloss polyurethane finishes and vehicles to improve the general performances of wood systems, with nitro and catalyze applications. It uses castor oil type, with a 78% oil and 80% solids content. This product has an OH solids amount of 5.8-6.0%, an A.V. solids amount of 6-10, a colour [G.H.] maximum 5, and a viscosity [G.H.] of X-Y. Vea Menos | |
| Benasol RT 43 | Benasedo | Benasol RT 43 is a vehicle to be used alone or combined with other Benasol for polyurethane sealers or mat finishes. It is endowed with high-body and fast drying, and has catalyze applications. This product contains castor and Talloil, with a 43% oil and ...Vea Mas Benasol RT 43 is a vehicle to be used alone or combined with other Benasol for polyurethane sealers or mat finishes. It is endowed with high-body and fast drying, and has catalyze applications. This product contains castor and Talloil, with a 43% oil and 60% solids amount. It has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-15, a color [ G.H.] maximum of 6, and an OH solids levle of 4.0-4.2%. Vea Menos | |
| BENASOL S 50 | Benasedo | BENASOL S 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...Vea Mas BENASOL S 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. Vea Menos | |
| BENASOL S 60 | Benasedo | BENASOL S 60 s an air - drying alkyd resin showing high wetting power and large compatibility with pigments; it provides good gloss and flow, colour retention, exterior durability and excellent brushability. It is suitable for making white or light shades...Vea Mas BENASOL S 60 s an air - drying alkyd resin showing high wetting power and large compatibility with pigments; it provides good gloss and flow, colour retention, exterior durability and excellent brushability. It is suitable for making white or light shades architectural enamels for interior and exterior, as well as for marine paints. Vea Menos | |
| BENASOL SI 25 | Benasedo | BENASOL SI 25 is a hydroxylated non–drying alkid resin for two components polyurethane topcoats endowed with excellent hardeness, build-up, solvent resistance and very good hadesion and flexibility. It is particularly suggested for formulating clear and p...Vea Mas BENASOL SI 25 is a hydroxylated non–drying alkid resin for two components polyurethane topcoats endowed with excellent hardeness, build-up, solvent resistance and very good hadesion and flexibility. It is particularly suggested for formulating clear and pigmented topcoats for wood forniture with high characteristics of mar resistance and high glossy also after polishing , applied in very fast curing cycle by courtain coating or spray. Vea Menos |
