| Hauthane L-3466 | Hauthaway | Hauthane L-3466 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicon...Vea Mas Hauthane L-3466 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including leather, plastics, metals and textiles. It also demonstrates exceptional dye transfer resistance in automotive leather seating and dry-erase, white board applications when crosslinked. L-3466 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. Vea Menos | |
| HS9101 | Tianyi Chemical Engineering Material Co., Ltd. | HS9101, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic or wooden coatings. This product has a rapid cure with high flexibility. It shows good hardness and resistance to abrasion. | |
| HS9103 | Tianyi Chemical Engineering Material Co., Ltd. | HS9103, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has good flowability and wetting characteristics. It shows high fullness and good f...Vea Mas HS9103, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has good flowability and wetting characteristics. It shows high fullness and good flexibility. Vea Menos | |
| HS9104 | Tianyi Chemical Engineering Material Co., Ltd. | HS9104, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has a rapid cure with high gloss. It has a low shrinkage rate with high flexibilit...Vea Mas HS9104, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has a rapid cure with high gloss. It has a low shrinkage rate with high flexibility. Vea Menos | |
| HS9106 | Tianyi Chemical Engineering Material Co., Ltd. | HS9106, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic paints or wooden paints. This product has good flowability and wetting characteristics. It cures quickly with good flexibility. | |
| HS9501 | Tianyi Chemical Engineering Material Co., Ltd. | HS9501, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in plastic coatings, UV oil inks, and abrasion-resistant wood coatings. This product cures quickly and is resistant to yellowing. Its substrate is an oligom...Vea Mas HS9501, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in plastic coatings, UV oil inks, and abrasion-resistant wood coatings. This product cures quickly and is resistant to yellowing. Its substrate is an oligomer that performs well in radiation or peroxide cure applications. Vea Menos | |
| HS9502 | Tianyi Chemical Engineering Material Co., Ltd. | HS9502, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in plastic UV top finishes. This product is quite flexible and has low shrinkage. Its substrate is a high-performance oligomer ...Vea Mas HS9502, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in plastic UV top finishes. This product is quite flexible and has low shrinkage. Its substrate is a high-performance oligomer that is designed for radiation and peroxide curing applications. Vea Menos | |
| HS9510 | Tianyi Chemical Engineering Material Co., Ltd. | HS9510, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in vacuum plating finishes, wood coatings, and metal coatings. This product cures quickly and is resistant to yellowing. Its substrate is an oligomer that p...Vea Mas HS9510, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in vacuum plating finishes, wood coatings, and metal coatings. This product cures quickly and is resistant to yellowing. Its substrate is an oligomer that performs well in radiation or peroxide cure applications. Vea Menos | |
| HS9545 | Tianyi Chemical Engineering Material Co., Ltd. | HS9545, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in metal or plastic spray coatings. This product is resistant to stains and abrasion. Its substrate is an oligomer that performs well in radiation or peroxid...Vea Mas HS9545, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in metal or plastic spray coatings. This product is resistant to stains and abrasion. Its substrate is an oligomer that performs well in radiation or peroxide cure applications. Vea Menos | |
| HS9555 | Tianyi Chemical Engineering Material Co., Ltd. | HS9555, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in BMC high-temperature resistant coatings, metal coatings, glass paints, and special plastic primers. This product is boil proof...Vea Mas HS9555, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in BMC high-temperature resistant coatings, metal coatings, glass paints, and special plastic primers. This product is boil proof and plates easily. Its substrate is a high-performance oligomer that is designed for radiation and peroxide curing applications. Vea Menos | |
| HS9732 | Tianyi Chemical Engineering Material Co., Ltd. | HS9732, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in metal coatings, BMC high-temperature resistant coatings, glass paints, and plastic primers. This product has high viscosity and tack. It also provi...Vea Mas HS9732, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in metal coatings, BMC high-temperature resistant coatings, glass paints, and plastic primers. This product has high viscosity and tack. It also provides a good balance between water and inks. Vea Menos | |
| Hydrorene 10 | S.A.P.I.C.I. SpA | Hydrorene 10 is a water-dispersible isocyanate. This product can be mixed with acrylic emulsions and polyurethane dispersion waterborne systems. It can be used as a hardener for 2K waterborne coatings with good chemical and abrasion resistance. | |
| Hydrorexin PU 5855 | S.A.P.I.C.I. SpA | Hydrorexin PU 5855 is a waterborne polyurethane dispersion based on polycarbonate. This product has good chemical and abrasion resistance with good pigment wetting. It can be used in 1K or 2K topcoats. It is particularly recommended for plastic and RIM...Vea Mas Hydrorexin PU 5855 is a waterborne polyurethane dispersion based on polycarbonate. This product has good chemical and abrasion resistance with good pigment wetting. It can be used in 1K or 2K topcoats. It is particularly recommended for plastic and RIM applications. Vea Menos | |
| IDROBEN PD 718 | Benasedo | IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBE...Vea Mas IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBEN PD 718 is recommended for clear and pigmented topcoats, both for plastic, glass and metal substrates. It is very suitable to produce matt enamels for the decorative field, endowed with high superficial hardness. Vea Menos | |
| KONDICRYL SV 166 | Pidilite Industries Ltd. - Resins Division | Da capas brillante y flexible que tiene una buena resistencia a la Gasolina. Kondicryl SV 166 tiene una amplia compatibilidad con otros vehículos de recubrimientos, tales como la Nitrocelulosa, Acetato Butirato de Celulosa y Vinilos. Kondicryl SV 166 pued...Vea Mas Da capas brillante y flexible que tiene una buena resistencia a la Gasolina. Kondicryl SV 166 tiene una amplia compatibilidad con otros vehículos de recubrimientos, tales como la Nitrocelulosa, Acetato Butirato de Celulosa y Vinilos. Kondicryl SV 166 puede ser utilizado como aglutinante para Recubrimientos de Uso General para Metales y Plásticos, Recubrimientos, Mampostería de Alto Rendimiento y Pinturas de Acabado Automotriz y Tintas. Vea Menos | |
| OTL-B-5 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-B-5 is a high quality concentrated aqueous pigment dispersion, pigment type of Carbon Black, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, c...Vea Mas OTL-B-5 is a high quality concentrated aqueous pigment dispersion, pigment type of Carbon Black, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. Vea Menos | |
| OTL-BE-50 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-BE-50 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...Vea Mas OTL-BE-50 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. Vea Menos | |
| OTL-BE-51 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-BE-51 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...Vea Mas OTL-BE-51 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. Vea Menos | |
| OTL-G-49 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-G-49 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Green, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...Vea Mas OTL-G-49 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Green, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. Vea Menos | |
| OTL-R-52 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-52 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Red, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, c...Vea Mas OTL-R-52 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Red, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. Vea Menos | |
| OTL-R-57 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...Vea Mas OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. Vea Menos | |
| OTL-W-58 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...Vea Mas OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. Vea Menos | |
| OTL-Y-53 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-53 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings...Vea Mas OTL-Y-53 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. Vea Menos | |
| OTL-Y-54 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-54 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings...Vea Mas OTL-Y-54 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. Vea Menos | |
| OTL-Y-55 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-55 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...Vea Mas OTL-Y-55 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. Vea Menos | |
| Picassian® AC-191 | Stahl Polymers | Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resi...Vea Mas Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resistance properties, good alcohol resistance, has good hand cream resistance, is stable with treated aluminium flakes, and provides clear, very hard, and glossy films. Vea Menos | |
| Picassian® PU-551 | Stahl Polymers | Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing pr...Vea Mas Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing properties, good wetting properties, good flow properties, good flexibility properties, and good blocking resistance properties. Vea Menos | |
| Polurene MT 100 | S.A.P.I.C.I. SpA | Polurene MT 100 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanates. | |
| Polurene MT 100 LLV | S.A.P.I.C.I. SpA | Polurene MT 100 LLV is an HDI trymer. This product is designed for non-yellowing systems. It can be used in 2K enamels for metal, wood and plastics that contain high solids. This product contains less than .2% HDI isocyanates. | |
| Polurene MT 75 | S.A.P.I.C.I. SpA | Polurene MT 75 is an aliphatic polyisocyanate. This product is designed for non-yellowing systems with improved performance. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyesters in order to make 2K paints a...Vea Mas Polurene MT 75 is an aliphatic polyisocyanate. This product is designed for non-yellowing systems with improved performance. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyesters in order to make 2K paints and enamels for metal, wood and plastics. This product contains less than .2% HDI isocyanates. Vea Menos | |
| Polurene MT 90 | S.A.P.I.C.I. SpA | Polurene MT 90 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low viscosity 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanat...Vea Mas Polurene MT 90 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low viscosity 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanates. Vea Menos | |
| Polurene MT 90 AB | S.A.P.I.C.I. SpA | Polurene MT 90 AB is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low-viscosity 2K paints and enamels for metal, wood and plastics that contain high solids. This product contains less than .2% HDI isocyanates. | |
| Relca® PU-968 | Stahl Polymers | Relca® PU-968 is an aqueous, anionic dispersion of an aliphatic polyester urethane. It is used in plastic coatings, flexible plastic topcoats, and leather finishing. This product is NMP free, NEP free, has good water resistance properties, good adhesion p...Vea Mas Relca® PU-968 is an aqueous, anionic dispersion of an aliphatic polyester urethane. It is used in plastic coatings, flexible plastic topcoats, and leather finishing. This product is NMP free, NEP free, has good water resistance properties, good adhesion properties, and is crosslinkable at room temperature with polycarbodiimides. Vea Menos | |
| Rexin DP 412 | S.A.P.I.C.I. SpA | Rexin DP 412 is a slightly branched solventless saturated polyester resin. This product has high chemical resistance and good elasticity. It can be used in coatings and enamels for metal, plastic, wood and rubber. | |
| Rexin DP 417 | S.A.P.I.C.I. SpA | Rexin DP 417 is a solventless saturated polyester resin. This product has good elasticity. It can be used in enamels and coatings for paper, leather, plastic and rubber. It is particularly used for the formation of soft-touch effect coatings. | |
| Rexin DP 430 | S.A.P.I.C.I. SpA | Rexin DP 430 is a solventless saturated polyester resin. This product has good elasticity. It can be used in coatings and enamels for leather, plastic, rubber and paper coatings. It is used to formulate soft-touch effect coatings. | |
| Sarbox SB401 | Sartomer Americas | Sarbox SB401 es un anhídrido y ácido carboxílico altamente funcional que contiene oligómero de metacrilato, mezclado en solvente de propionato de etil-3-etoxi (EEP). Ofrece curado rápido y excelente adherencia en cobre. SB401 presenta un índice de acidez ...Vea Mas Sarbox SB401 es un anhídrido y ácido carboxílico altamente funcional que contiene oligómero de metacrilato, mezclado en solvente de propionato de etil-3-etoxi (EEP). Ofrece curado rápido y excelente adherencia en cobre. SB401 presenta un índice de acidez elevado para la disgregabilidad álcali. Sarbox SB401 también proporciona buena resistencia a solventes y a los ácidos y excelente desarrollo acuoso del brillo. Las aplicaciones sugeridas de este producto incluyen revestimientos de metales, plásticos y madera, tintas, máscaras de soldadura y resinas fotosensibles para electrónica. Vea Menos | |
| Sarbox SB405 | Sartomer Americas | Sarbox SB405 es un anhídrido y ácido carboxílico altamente funcional en forma de líquido claro que contiene oligómero de acrilato mezclado en solvente de acetato PM. Este producto ofrece buena adherencia, curado dual y rápida respuesta de curado. También ...Vea Mas Sarbox SB405 es un anhídrido y ácido carboxílico altamente funcional en forma de líquido claro que contiene oligómero de acrilato mezclado en solvente de acetato PM. Este producto ofrece buena adherencia, curado dual y rápida respuesta de curado. También ofrece gran flexibilidad, baja contracción y resistencia al calor, al agua y a los químicos. Sarbox SB405 se recomienda para placas de grabado, máscaras de soldadura para electrónica y revestimientos de madera y plástico. Vea Menos | |
| Sarbox SB510E35 | Sartomer Americas | Sarbox SB510E35 es un anhídrido y ácido carboxílico moderadamente funcional que contiene oligómero de metacrilato y monómero de triacrilato de trimetilolpropano etoxilado. Ofrece una excelente velocidad de curado, excelente adherencia a metal y plásticos,...Vea Mas Sarbox SB510E35 es un anhídrido y ácido carboxílico moderadamente funcional que contiene oligómero de metacrilato y monómero de triacrilato de trimetilolpropano etoxilado. Ofrece una excelente velocidad de curado, excelente adherencia a metal y plásticos, y buenas características de humectación y de flujo. Sarbox SB510E35 también ofrece una excelente adherencia de películas delgadas en acero electrorrevestido. Las aplicaciones sugeridas de este producto incluyen adhesivos, plastisoles, tintas de serigrafía, flexografía, huecograbado y revestimientos de papel, plástico, metal y madera. Vea Menos | |
| Sarbox SB520E35 | Sartomer Americas | Sarbox SB520E35 es un ácido carboxílico moderadamente funcional que contiene oligómero de acrilato y monómero de diacrilato tripropileno. Los sólidos reactivos de este producto se presentan en un 100%. Sarbox SB520E35 ofrece una de las tasas más rápidas d...Vea Mas Sarbox SB520E35 es un ácido carboxílico moderadamente funcional que contiene oligómero de acrilato y monómero de diacrilato tripropileno. Los sólidos reactivos de este producto se presentan en un 100%. Sarbox SB520E35 ofrece una de las tasas más rápidas de curado de la línea de productos Sarbox, excelente adherencia a metales y plásticos, y buenas características de humectación y de flujo. También ofrece alta resistencia al impacto y flexibilidad, y buena resistencia química, al agua y al calor. Otras aplicaciones sugeridas para este producto incluyen aplicaciones de tintas, revestimientos de madera y papel, y resinas fotosensibles y máscaras de soldadura para electrónica. Vea Menos | |
| Sarbox SB520M35 | Sartomer Americas | Sarbox SB520M35 es un ácido carboxílico moderadamente funcional que contiene oligómero de acrilato y monómero de diacrilato tripropileno. Sarbox SB520M35 ofrece una de las tasas más rápidas de curado de la línea de productos Sarbox, excelente adherencia a...Vea Mas Sarbox SB520M35 es un ácido carboxílico moderadamente funcional que contiene oligómero de acrilato y monómero de diacrilato tripropileno. Sarbox SB520M35 ofrece una de las tasas más rápidas de curado de la línea de productos Sarbox, excelente adherencia a metales y plásticos, y buenas características de humectación y de flujo. También ofrece alta resistencia al impacto y flexibilidad, y buena resistencia química, al agua y al calor. Otras aplicaciones sugeridas para este producto incluyen tintas serigráficas, flexográficas y de huecograbado, revestimientos de madera y de papel, y resinas fotosensibles y máscaras de soldadura para electrónica. Vea Menos | |
| SILIKOPUR® 8081 | Evonik Operations GmbH, BL Coating Additives | SILIKOPUR® 8081 is a silicone modified polyurethane dispersion. It provides a water-beading effect, offers extremely high flexibility, good recoatability, and good air-drying. This product is suitable for waterborne, clear coat, pigmented, direct grind, a...Vea Mas SILIKOPUR® 8081 is a silicone modified polyurethane dispersion. It provides a water-beading effect, offers extremely high flexibility, good recoatability, and good air-drying. This product is suitable for waterborne, clear coat, pigmented, direct grind, and 2-pack coatings. Vea Menos | Request Sample |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...Vea Mas SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. Vea Menos | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...Vea Mas SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. Vea Menos | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...Vea Mas SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. Vea Menos | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...Vea Mas SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. Vea Menos | |
| STANLUX® Gold 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...Vea Mas STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2000 is available in several shades and has an average size of 50 microns. Vea Menos | |
| STANLUX® Silver 2210 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 2210 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2210 has an a...Vea Mas STANLUX® Silver 2210 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2210 has an average particle size of 60 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver 2240 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 2240 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2240 has an a...Vea Mas STANLUX® Silver 2240 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2240 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver 3201 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...Vea Mas STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3201 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. Vea Menos | |
| STANLUX® Silver 3301 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...Vea Mas STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3301 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. Vea Menos | |
| STANLUX® Silver 3501 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...Vea Mas STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3501 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. Vea Menos | |
| STANLUX® Silver 3571 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...Vea Mas STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3571 has an average particle size of 23 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. Vea Menos | |
| STANLUX® Silver 3701 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...Vea Mas STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3701 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. Vea Menos | |
| STANLUX® Silver 3711 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...Vea Mas STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3711 has an average particle size of 17 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. Vea Menos | |
| STANLUX® Silver 3871 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3871 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require high hiding power. STANLUX® Silver 3871 has an aver...Vea Mas STANLUX® Silver 3871 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require high hiding power. STANLUX® Silver 3871 has an average particle size of 13 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver 3891 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3891 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require the highest hiding power and clear colour property....Vea Mas STANLUX® Silver 3891 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require the highest hiding power and clear colour property. STANLUX® Silver 3891 has an average particle size of 11 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R2970 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R2970 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect. It is recommended in formulations for double layer systems that require aluminium pigment with high metallic effect. STANLUX® Sil...Vea Mas STANLUX® Silver R2970 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect. It is recommended in formulations for double layer systems that require aluminium pigment with high metallic effect. STANLUX® Silver R2970 has an average particle size of 32 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R3270 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3270 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3270 has an av...Vea Mas STANLUX® Silver R3270 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3270 has an average particle size of 25 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R3370 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3370 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3370 has an ave...Vea Mas STANLUX® Silver R3370 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3370 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R3500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3500 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3500 has an ave...Vea Mas STANLUX® Silver R3500 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3500 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R3670 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3670 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3670 has an ave...Vea Mas STANLUX® Silver R3670 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3670 has an average particle size of 20 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R3770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3770 is a non-leafing type aluminium pigment with medium, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3770 ha...Vea Mas STANLUX® Silver R3770 is a non-leafing type aluminium pigment with medium, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3770 has an average particle size of 18 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R3870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3870 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3870 has ...Vea Mas STANLUX® Silver R3870 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3870 has an average particle size of 13 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R4100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4100 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...Vea Mas STANLUX® Silver R4100 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4100 has an average particle size of 64 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R4112 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4112 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...Vea Mas STANLUX® Silver R4112 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4112 has an average particle size of 45 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R4114 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4114 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metal...Vea Mas STANLUX® Silver R4114 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4114 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R4200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4200 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...Vea Mas STANLUX® Silver R4200 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4200 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® SIlver R4500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4500 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...Vea Mas STANLUX® Silver R4500 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4500 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R4700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4700 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effe...Vea Mas STANLUX® Silver R4700 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4700 has an average particle size of 22 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R4800 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4800 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effe...Vea Mas STANLUX® Silver R4800 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4800 has an average particle size of 18 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R4850 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4850 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metalli...Vea Mas STANLUX® Silver R4850 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4850 has an average particle size of 15 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R6200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R6200 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6200 has an...Vea Mas STANLUX® Silver R6200 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6200 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R6300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R6300 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver...Vea Mas STANLUX® Silver R6300 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6300 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver R6400 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R6400 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It has a differentiated metallic effect in whiteness and brilliance and is recommended for...Vea Mas STANLUX® Silver R6400 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It has a differentiated metallic effect in whiteness and brilliance and is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6400 has an average particle size of 20 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver SD7100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7100 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems ...Vea Mas STANLUX® Silver SD7100 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7100 has an average particle size of 34 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver SD7200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7200 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems ...Vea Mas STANLUX® Silver SD7200 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7200 has an average particle size of 33 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver SD7300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7300 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems ...Vea Mas STANLUX® Silver SD7300 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7300 has an average particle size of 30 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver SD7450 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7450 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that req...Vea Mas STANLUX® Silver SD7450 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7450 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver SD7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7500 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that req...Vea Mas STANLUX® Silver SD7500 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7500 has an average particle size of 22 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® Silver SD7700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7700 is a non-leafing type aluminium pigment with medium-fine, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance sys...Vea Mas STANLUX® Silver SD7700 is a non-leafing type aluminium pigment with medium-fine, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7700 has an average particle size of 20 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. Vea Menos | |
| STANLUX® SIlver VAP10 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average...Vea Mas STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average particle size and is used in decorative coatings for internal car parts, plastic coatings, and flexographic and gravure printing inks. Vea Menos | |
| TKA-66 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKA-66 is a solid thermoplastic acrylic resin that is soluble in ester, ketone, and aromatics. This product features good gloss hardness and pigment dispersion while providing good chemical and weather resistance. It is commonly used in a variety of appli...Vea Mas TKA-66 is a solid thermoplastic acrylic resin that is soluble in ester, ketone, and aromatics. This product features good gloss hardness and pigment dispersion while providing good chemical and weather resistance. It is commonly used in a variety of applications including inks, plastic paints, and container paints. Vea Menos | |
| UCECOAT® 6570 | Allnex | UCECOAT® 6570 is a 3 functional aliphatic urethane acrylate oligomer diluted with 5% water. This water dilutable urethane acrylate is particularly useful in screen inks and varnishes for water based applications; giving good water- and solvent resistance ...Vea Mas UCECOAT® 6570 is a 3 functional aliphatic urethane acrylate oligomer diluted with 5% water. This water dilutable urethane acrylate is particularly useful in screen inks and varnishes for water based applications; giving good water- and solvent resistance after curing by ultraviolet light (UV) or electron beam (EB). Vea Menos | Request Sample |
| Ucopol M 4054 | S.A.P.I.C.I. SpA | Ucopol M 4054 is a moisture-curing prepolymer. This product dries quickly with good surface hardness, abrasion resistance and good brightness. It can be used in parquet or plastic coatings. This product contains less than .5% TDI isocyanates. | |
| Ucopol M 505 | S.A.P.I.C.I. SpA | Ucopol M 505 is a moisture-curing prepolymer. This product has good flexibility and weather resistance. It can be used in coatings for wood, plastics, concrete, rubber, textile fabrics, and leather. This product contains less than .5% TDI isocyanates. | |
| Ucopol W 708 | S.A.P.I.C.I. SpA | Ucopol W 708 is a moisture-curing prepolymer. This product has good chemical, weather, and yellowing resistance. It can be used in wood, plastic and concrete coatings. This product has less than .5% HDI isocyanates. | |
| WorléeCryl® 7135 | Worlée-Chemie G.m.b.H. | Emulsión copolímero de acrílico del estireno. Se utiliza para acabados en metal, madera, plásticos (PS, ABS). También para las pinturas base anticorrosivas sobre metal, se puede combinar con resinas alquídicas diluibles en agua. | |
| WorléeCryl® A 1220 | Worlée-Chemie G.m.b.H. | Una resina acrílica que pueden ser reticulada con poliisocianatos. | |
| WorléeCryl® A 2141 | Worlée-Chemie G.m.b.H. | Una resina acrílica que pueden ser reticulada con poliisocianatos para la producción de pinturas industriales de alta calidad. | |
| WorléeCryl® A 2218 | Worlée-Chemie G.m.b.H. | Una resina acrílica de estireno que pueden ser reticulados con poliisocianatos. Se prefiere para la formulación de pinturas base de secado rápido , rellenos, y capas superiores de acero y plásticos. | |
| WorléeThix A 1420 | Worlée-Chemie G.m.b.H. | Un acrilato tixotrópico, hidroxifuncional puro para la fabricación de dos capas de componentes principales. | |
| WorléeThix A 2125 | Worlée-Chemie G.m.b.H. | Una resina tixotrópica, acrílico utilizado para la formulación de sistema de secado al aire y forzado para metal, maderas y plásticos. | |
| WorléeThix A 2313 | Worlée-Chemie G.m.b.H. | Una resina acrílica tixotrópico utilizada como aglutinante para la fabricación de pinturas industriales de secado de aire y forzado. | |
| XHG-9169 Acid-Cure Silicone Sealant | Zhejiang Wynca Chemical Industry Group | XHG-9169 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As a primerless ...Vea Mas XHG-9169 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As a primerless adhesion, it can be applied to most non-porous siliceous material such as glass, tiles, ceramics, enamel and glazed tiles as well as impregnated, varnished or painted wood and some plastics. Vea Menos | |
| XHG-9179 Acid-Cure Silicone Sealant | Zhejiang Wynca Chemical Industry Group | XHG-9179 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose do-it-yourself applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. A...Vea Mas XHG-9179 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose do-it-yourself applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As an adhesion, it can be applied to glass such as windows, glazed surfaces, ceramic tiles, and many plastics and paints. Vea Menos |
