| 3-Chloropropylmethyldimethoxysilane | Dalian Onichem Co., Ltd. | 3-cloropropilmetildimetoxisilano es un agente de acoplamiento etoxi-funcional de cloro que hierve entre 70-72 ºC. Es un líquido incoloro o amarillento ligero usado en resinas epoxi y caucho halogenado para materiales de carga tratados con el fin de promov...Vea Mas 3-cloropropilmetildimetoxisilano es un agente de acoplamiento etoxi-funcional de cloro que hierve entre 70-72 ºC. Es un líquido incoloro o amarillento ligero usado en resinas epoxi y caucho halogenado para materiales de carga tratados con el fin de promover las propiedades, o se utiliza como agente de reticulación para RTV. 3-cloropropilmetildimetoxisilano es también la materia prima para otros silanos órgano-funcionales con metildimetoxi. Vea Menos | Request Sample |
| 3-Chloropropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-cloropropiltrietoxisilano es un agente de acoplamiento etoxi-funcional de cloro que hierve a 220 ºC. Es un líquido incoloro o amarillento ligero usado en resinas epoxi y caucho halogenado para materiales de carga tratados con el fin de promover las prop...Vea Mas 3-cloropropiltrietoxisilano es un agente de acoplamiento etoxi-funcional de cloro que hierve a 220 ºC. Es un líquido incoloro o amarillento ligero usado en resinas epoxi y caucho halogenado para materiales de carga tratados con el fin de promover las propiedades, o se utiliza como agente de reticulación para RTV. 3-cloropropiltrietoxisilano es también el material intermedio clave de otros silanos órgano-funcionales con trietoxi. Vea Menos | Request Sample |
| 3-Chloropropyltrimethoxysilane | Dalian Onichem Co., Ltd. | 3-cloropropiltriimetoxisilano es un agente de acoplamiento metoxi-funcional de cloro que hierve a 192 ºC. Es un líquido incoloro o amarillento ligero usado en resinas epoxi con el fin de promover las propiedades, o que se utiliza como agente de reticulaci...Vea Mas 3-cloropropiltriimetoxisilano es un agente de acoplamiento metoxi-funcional de cloro que hierve a 192 ºC. Es un líquido incoloro o amarillento ligero usado en resinas epoxi con el fin de promover las propiedades, o que se utiliza como agente de reticulación para RTV. 3-cloropropiltriimetoxisilano es también un producto intermedio clave para la preparación de una variedad de amino-, mercapto-y metacriloiloxiorganosilanos que se utilizan como agentes de acoplamiento de silano. Vea Menos | Request Sample |
| Baymedix® AP501 | Covestro | Baymedix® AP501 is an aliphatic NCO-terminated prepolymer based on hexamethylene diisocyanate. | |
| Baymedix® FP503 | Covestro | Baymedix® FP503 is an aliphatic, hydrophilic NCO prepolymer blend based on hexamethylene diisocyanate (HDI). | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135LV2 es un poliol poliéster de baja cristalinidad con funcionalidad ácido hidroxilo. Al igual que DMPA® Polyol HA-0135, esta resina está diseñada para eliminar el uso de NMP como solvente en el proceso de fabricación de dispersiones de ...Vea Mas DMPA® Polyol HA-0135LV2 es un poliol poliéster de baja cristalinidad con funcionalidad ácido hidroxilo. Al igual que DMPA® Polyol HA-0135, esta resina está diseñada para eliminar el uso de NMP como solvente en el proceso de fabricación de dispersiones de poliuretano. Este producto proporciona una mayor concentración de hidroxilo, mayor dureza del revestimiento y resistencia química. Presenta baja cristalinidad y permite facilidad de manejo a temperaturas inferiores. DMPA® Polyol HA-0135LV2 tiene un valor hidroxilo de 330 a 345 mg KOH/g, una densidad a 25 °C de 1170 a 1200 g/l, una viscosidad a 25 °C de 172 poise y un contenido de color (APHA) de < 250 como máx. Vea Menos | |
| Dynasylan® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® 40, una mezcla de éster etílico de diferentes ácidos polisilícicos, es, junto con el monomérico Dynasylan® A, el éster de silícico más importante a nivel industrial. Dynasylan® 40 se forma en presencia de agua de tetraetil silicato por hidrólis...Vea Mas Dynasylan® 40, una mezcla de éster etílico de diferentes ácidos polisilícicos, es, junto con el monomérico Dynasylan® A, el éster de silícico más importante a nivel industrial. Dynasylan® 40 se forma en presencia de agua de tetraetil silicato por hidrólisis parcial de los grupos etoxilo a grupos hidroxilos y su subsecuente condensación con formación de enlaces siloxanos. Dynasylan® 40 es un líquido incoloro de baja viscosidad con un contenido de SiO2 del 40%. Los ácidos polisilícicos pueden tener suficiente contenido de grupos etoxilo que se pueden activar mediante ácido o hidrólisis catalizada base. La condensación comienza incluso durante la hidrólisis, con la formación de moléculas poliméricas relativamente largas. Durante el almacenamiento de estos hidrolizados, la condensación continúa hasta que se forma un gel en el que la tasa depende del grado de hidrólisis. La acción de los hidrolizados como enlaces se basa en la continuación de la hidrólisis con la subsecuente gelificación y deshidratación para producir estructuras poliméricas SiO2. Vea Menos | |
| Dynasylan® A | Evonik Operations GmbH, BL Silanes | Dynasylan® A, el ester etílico de ácido ortosilícico es el tetra alquil silicato más importante en la industria. En la bibliografía se lo suele mencionar con el nombre TEOS (tetraetoxisilano). Dynasylan® A es un líquido incoloro de baja viscosidad con un ...Vea Mas Dynasylan® A, el ester etílico de ácido ortosilícico es el tetra alquil silicato más importante en la industria. En la bibliografía se lo suele mencionar con el nombre TEOS (tetraetoxisilano). Dynasylan® A es un líquido incoloro de baja viscosidad con un contenido de SiO2 del 28,5%. Para su uso se requiere hidrólisis mediante catálisis ácida o alcalina. Dado que los 4 grupos etoxilo pueden participar en esta reacción, Dynasylan® A es considerado tetrafuncional. La hidrólisis produce grupos de silanol que, en una reacción de condensación subsecuente, forman enlaces de siloxano (-Si-O-Si-). La condensación comienza antes de que se complete la hidrólisis. Durante el almacenaje continúa la condensación del hidrolizado continúa hasta que se forma un gel. La tasa de formación del gel depende de la concentración del agua. Vea Menos | |
| FUNSIL® | Industrias Quimicas del Ebro IQE | FUNSIL® is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial applic...Vea Mas FUNSIL® is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial applications. Vea Menos | |
| NASIL® 3.0 | Industrias Quimicas del Ebro IQE | NASIL® 3.0 is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial app...Vea Mas NASIL® 3.0 is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial applications. Vea Menos | |
| NASIL® 3.35 | Industrias Quimicas del Ebro IQE | NASIL® 3.35 is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial ap...Vea Mas NASIL® 3.35 is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial applications. Vea Menos | |
| NASIL® 3.5 | Industrias Quimicas del Ebro IQE | NASIL® 3.5 is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial app...Vea Mas NASIL® 3.5 is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial applications. Vea Menos | |
| NASIL® 45 | Industrias Quimicas del Ebro IQE | NASIL® 45 is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial appl...Vea Mas NASIL® 45 is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial applications. Vea Menos | |
| NASIL® 50 | Industrias Quimicas del Ebro IQE | NASIL® 50 is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial appl...Vea Mas NASIL® 50 is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial applications. Vea Menos | |
| NASIL® 52.5 | Industrias Quimicas del Ebro IQE | NASIL® 52.5 is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial ap...Vea Mas NASIL® 52.5 is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial applications. Vea Menos | |
| NASIL® 58 | Industrias Quimicas del Ebro IQE | NASIL® 58 is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial appl...Vea Mas NASIL® 58 is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial applications. Vea Menos | |
| NASIL® A52F | Industrias Quimicas del Ebro IQE | NASIL® A52F is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial ap...Vea Mas NASIL® A52F is an aqueous solution of sodium silicate - which is obtained by fusing quartz sand and sodium carbonate at high temperatures. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial applications. Vea Menos | |
| NASIL® C/2.0 | Industrias Quimicas del Ebro IQE | NASIL® C/2.0 is a sodium silicate - obtained by fusing quartz sand and sodium carbonate at high temperatures - in amorphous solid or lump form. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industri...Vea Mas NASIL® C/2.0 is a sodium silicate - obtained by fusing quartz sand and sodium carbonate at high temperatures - in amorphous solid or lump form. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial applications. Vea Menos | |
| NASIL® C/3.35 | Industrias Quimicas del Ebro IQE | NASIL® C/3.35 is a sodium silicate - obtained by fusing quartz sand and sodium carbonate at high temperatures - in amorphous solid or lump form. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industr...Vea Mas NASIL® C/3.35 is a sodium silicate - obtained by fusing quartz sand and sodium carbonate at high temperatures - in amorphous solid or lump form. This product finds use in diverse fields, including adhesives, paper construction, paints, and various industrial applications. Vea Menos | |
| Ongronat® 1080 | BorsodChem Rt. | Ongronat® 1080 is a mixture of 2-methyl-m-phenylene diisocyanate and 4-methyl-m-phenylene diisocyanate in a 4:1 ratio. This product appears as a transparent liquid at room temperature. It can be used as a coating, and as adhesives and sealants. It feat...Vea Mas Ongronat® 1080 is a mixture of 2-methyl-m-phenylene diisocyanate and 4-methyl-m-phenylene diisocyanate in a 4:1 ratio. This product appears as a transparent liquid at room temperature. It can be used as a coating, and as adhesives and sealants. It features excellent adhesion, high gloss, and durability. Vea Menos | |
| Ongronat® 1100 | BorsodChem Rt. | Ongronat® 1100 is a 4-methyl-m-phenylene diisocyanate isomer. This product appears as a transparent liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features water and stain resistance, excellent adhe...Vea Mas Ongronat® 1100 is a 4-methyl-m-phenylene diisocyanate isomer. This product appears as a transparent liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features water and stain resistance, excellent adhesion, and high gloss. Vea Menos | |
| Ongronat® 1101 | BorsodChem Rt. | Ongronat® 1101 is a 2,4 TDI (T100) resin with elevated acidity. This product appears as solid, colourless or mildly yellow crystals at 20°C, 1013 hPa, and as a colourless or mildly yellow liquid at 25°C, 1013 hPa. It can be used in paints, coatings, adh...Vea Mas Ongronat® 1101 is a 2,4 TDI (T100) resin with elevated acidity. This product appears as solid, colourless or mildly yellow crystals at 20°C, 1013 hPa, and as a colourless or mildly yellow liquid at 25°C, 1013 hPa. It can be used in paints, coatings, adhesives and sealants. This product features a slow curing speed and low reactivity. Vea Menos | |
| Ongronat® 3600 | BorsodChem Rt. | Ongronat® 3600 a mixture of methylenebis(phenylisocyanate) isomers. This product appears as a solvent-free, clear and colourless liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features weather-, che...Vea Mas Ongronat® 3600 a mixture of methylenebis(phenylisocyanate) isomers. This product appears as a solvent-free, clear and colourless liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features weather-, chemical- and abrasion resistance. It is very flexible, strong and durable. Vea Menos | |
| Ongronat® CO 2170 | BorsodChem Rt. | Ongronat® CO 2170 is a type of polymeric MDI with standard functionality and elevated acidity. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a construction adhesive. This product feature...Vea Mas Ongronat® CO 2170 is a type of polymeric MDI with standard functionality and elevated acidity. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a construction adhesive. This product features slower curing speed and a longer pot life. Vea Menos | |
| Ongronat® CO 4050 | BorsodChem Rt. | Ongronat® CO 4050 is a mixture of MDI mixed isomers with carbodiimide-modified 4,4'-methylene diphenyl diisocyanate and additives. This product appears as a solvent-free, colourless or pale yellow, low viscosity liquid at room temperature. It can be use...Vea Mas Ongronat® CO 4050 is a mixture of MDI mixed isomers with carbodiimide-modified 4,4'-methylene diphenyl diisocyanate and additives. This product appears as a solvent-free, colourless or pale yellow, low viscosity liquid at room temperature. It can be used in construction adhesives, sealants and coatings. This product features excellent adhesion and good mechanical properties. Vea Menos | |
| Ongronat® CO 4070 | BorsodChem Rt. | Ongronat® CO 4070 is an oligomeric MDI blend. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as construction adhesives, sealants, and coatings. This product features excellent thermal insula...Vea Mas Ongronat® CO 4070 is an oligomeric MDI blend. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as construction adhesives, sealants, and coatings. This product features excellent thermal insulation and good flowability. Vea Menos | |
| Ongronat® CO 4150 | BorsodChem Rt. | Ongronat® CO 4150 is a mixture of MDI-mixed isomers and oligomeric MDI. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used in construction adhesives. This product features good wetting propertie...Vea Mas Ongronat® CO 4150 is a mixture of MDI-mixed isomers and oligomeric MDI. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used in construction adhesives. This product features good wetting properties and good adhesion capability. Vea Menos | |
| Ongronat® CO 5700 | BorsodChem Rt. | Ongronat® CO 5700 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid free from any solid precip...Vea Mas Ongronat® CO 5700 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid free from any solid precipitates. It can be used as a construction adhesive. Vea Menos | |
| Ongronat® CO 5750 | BorsodChem Rt. | Ongronat® CO 5750 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid, free from solid precipita...Vea Mas Ongronat® CO 5750 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid, free from solid precipitates. It can be used as a construction adhesive. This product features high resilience bonding and good elongation properties. Vea Menos | |
| Priplast 3187 | Cargill Industrial Specialties | Priplast 3187 is a dimer fatty acid based polyester polyols building block for PU adhesives, sealants and elastomers; provides high flexibility at very low temperatures, and good compatibility to low polar components. | |
| Priplast 3197 | Cargill Industrial Specialties | Priplast 3197 is a liquid, amorphous polyester polyol that is a 100% bio-based building block for PU adhesives and sealants. It provides extreme hydrophobicity, water repellency and flexibility in PU systems with rubbery elasticity, compatible to low pola...Vea Mas Priplast 3197 is a liquid, amorphous polyester polyol that is a 100% bio-based building block for PU adhesives and sealants. It provides extreme hydrophobicity, water repellency and flexibility in PU systems with rubbery elasticity, compatible to low polar components. Vea Menos | |
| Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) | Cargill Industrial Specialties | Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) is a 100% bio-based polyester polyol used in PU systems with rubbery elasticity, compatibility to low polar components. It provides resistance to hydrolytic attack, alkali and acid, oxidative and tempe...Vea Mas Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) is a 100% bio-based polyester polyol used in PU systems with rubbery elasticity, compatibility to low polar components. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. Vea Menos | |
| Pripol 2030 Dimerdiol | Cargill Industrial Specialties | Diol dímero, bloque básico de construcción para revestimientos de poliuretano y de poliéster, adhesivos y elastómeros. Proporciona estabilidad termo-oxidativa excepcional, buen color, repelencia al agua, flexibilidad y excepcional hidrólisis/resistencia ...Vea Mas Diol dímero, bloque básico de construcción para revestimientos de poliuretano y de poliéster, adhesivos y elastómeros. Proporciona estabilidad termo-oxidativa excepcional, buen color, repelencia al agua, flexibilidad y excepcional hidrólisis/resistencia química. Vea Menos | |
| SMPU 224 | Guangzhou GBS High-Tech & Industry Co., Ltd. | SMPU 224 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU seal...Vea Mas SMPU 224 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU sealants for automotive, construction, and shipping applications. Vea Menos | |
| SMPU 225 | Guangzhou GBS High-Tech & Industry Co., Ltd. | SMPU 225 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU seal...Vea Mas SMPU 225 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU sealants for automotive, construction, and shipping applications. Vea Menos | |
| SMPU 301 | Guangzhou GBS High-Tech & Industry Co., Ltd. | SMPU 301 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU seal...Vea Mas SMPU 301 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU sealants for automotive, construction, and shipping applications. Vea Menos | |
| SMPU 402 | Guangzhou GBS High-Tech & Industry Co., Ltd. | SMPU 402 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU seal...Vea Mas SMPU 402 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU sealants for automotive, construction, and shipping applications. Vea Menos | |
| SPUR+ 1012 prepolymer | Momentive Performance Materials | SPUR+ 1012 prepolymer is a silylated prepolymer that does not rely on an isocyanate curing reactions. Additionally, it is formulated without the use of phthalate-based plasticizers, and in sealant formulations, using it as the base resin or in combination...Vea Mas SPUR+ 1012 prepolymer is a silylated prepolymer that does not rely on an isocyanate curing reactions. Additionally, it is formulated without the use of phthalate-based plasticizers, and in sealant formulations, using it as the base resin or in combination with SPUR+ 1015 prepolymer, extremely low modulus values can be attained. This moisture curable resin is an excellent candidate to consider in formulating construction sealants requiring rapid cure, good water resistance, high flexibility and adhesion to most construction substrate materials such as concrete, marble and glass. Vea Menos | |
| SPUR+ 1015 prepolymer | Momentive Performance Materials | SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and constructi...Vea Mas SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construction applications where good elastic recovery is required. Vea Menos | |
| SPUR+ 1015 prepolymer | Momentive Performance Materials | SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construct...Vea Mas SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construction applications where good elastic recovery is required. Vea Menos | |
| SPUR+ 1050 prepolymer | Momentive Performance Materials | SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and adhesives in ind...Vea Mas SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and adhesives in industrial and transportation applications where higher tensile strength is required. Vea Menos | |
| SPUR+ 1050 prepolymer | Momentive Performance Materials | SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and applications whe...Vea Mas SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and applications where higher tensile strength is required. Vea Menos | |
| SPUR+ 1060 prepolymer | Momentive Performance Materials | SPUR+ 1060 prepolymer is a plasticizer-free, ethoxysilane-modified resin used in the manufacture of one-part moisture-curing adhesives and sealants. It is an excellent material of choice as a base resin for medium modulus adhesives and sealants that serve...Vea Mas SPUR+ 1060 prepolymer is a plasticizer-free, ethoxysilane-modified resin used in the manufacture of one-part moisture-curing adhesives and sealants. It is an excellent material of choice as a base resin for medium modulus adhesives and sealants that serve a range of applications, particularly where HAPs emissions are a significant factor. Vea Menos | |
| TRI-REZ® Polyol 1030-60 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | La resina de poliéster TRI-REZ™ Polyol 1030-60 es un poliol de poliéster lineal saturado, de baja viscosidad, no cristalino, diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 103...Vea Mas La resina de poliéster TRI-REZ™ Polyol 1030-60 es un poliol de poliéster lineal saturado, de baja viscosidad, no cristalino, diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 1030-60 produce un poliol ideal para la formulación de resinas de poliuretano a base de agua de alto contenido de sólidos. Este producto tiene una viscosidad (Brookfield a 25 °C) de 40 a 60 P, un contenido de humedad dde 0,05% máx. y un número de hidroxilo (como se suministra) de 57 a 63 mg KOH/g. Vea Menos | |
| TRI-REZ® Polyol 1030-90 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | La resina de poliéster TRI-REZ™ Polyol 1030-90 es un poliol de poliéster lineal saturado, de baja viscosidad, no cristalino, diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 103...Vea Mas La resina de poliéster TRI-REZ™ Polyol 1030-90 es un poliol de poliéster lineal saturado, de baja viscosidad, no cristalino, diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 1030-90 produce un poliol ideal para la formulación de resinas de poliuretano a base de agua de alto contenido de sólidos. Este producto tiene un índice de acidez (como se suministra) de 0,8 mg KOH/g como máx., una viscosidad (Brookfield a 25 °C, como se suministra) de 15 a 30 P y un color (APHA) de 250 máx. Vea Menos | |
| TRI-REZ® Polyol 1220A-300 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1220A-300 es un poliol de poliéster sólido al 100 % saturado altamente ramificado a base de TRIMET® TME (trimetiloletano). La estructura altamente ramificada de TRI-REZ® Polyol 1220A-300 lo hace una opción ideal para la formulación de reve...Vea Mas TRI-REZ® Polyol 1220A-300 es un poliol de poliéster sólido al 100 % saturado altamente ramificado a base de TRIMET® TME (trimetiloletano). La estructura altamente ramificada de TRI-REZ® Polyol 1220A-300 lo hace una opción ideal para la formulación de revestimientos de poliuretano con alto contenido sólido, de dos componentes, y elastómeros que requieren excelentes propiedades de resistencia química y la luz UV. Vea Menos | |
| TRI-REZ® Polyol 1230-60 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | La resina de poliéster TRI-REZ™ Polyol 1230-60 es un poliol de poliéster lineal saturado semicristalino diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 1230-60 produce un polio...Vea Mas La resina de poliéster TRI-REZ™ Polyol 1230-60 es un poliol de poliéster lineal saturado semicristalino diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 1230-60 produce un poliol ideal para la formulación de resinas de poliuretano a base de agua de alto contenido de sólidos. Este producto es un líquido claro, viscoso, con una densidad (l/g a 25 °C) de 9,3 +/- 0,3, un contenido de humedad de 0,05 máx., una viscosidad (Brookfield a 25 °C, como se suministra) de 300 a 500 P y un número hidroxil (como se suministra) de 57-63 mg KOH/g. Vea Menos | |
| TRI-REZ® Polyol 1230-90 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | La resina de poliéster TRI-REZ™ Polyol 1230-90 es un poliol de poliéster lineal saturado semicristalino diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 1230-90 produce un polio...Vea Mas La resina de poliéster TRI-REZ™ Polyol 1230-90 es un poliol de poliéster lineal saturado semicristalino diseñado para adhesivos, espumas y revestimientos a base de poliuretano. La estructura flexible e hidrófoba de TRI-REZ™ Polyol 1230-90 produce un poliol ideal para la formulación de resinas de poliuretano a base de agua de alto contenido de sólidos. Este producto es un líquido claro, viscoso, con un índice ácido (como se suministra) de 0,8 mg KOH/g máx., un contenido de hidroxil (como se suministra) de 87 - 93 mg KOH/g y una viscosidad (Brookfield a 25 °C, como se suministra) de 100 a 200 P. Vea Menos | |
| Trimethylolpropane Flakes | Perstorp | Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, ros...Vea Mas Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. Vea Menos | |
| Trimethylolpropane Molten | Perstorp | Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for sy...Vea Mas Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. Vea Menos |
