| CAPCURE® 3850-101 | Gabriel Performance Products | CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...Vea Mas CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. Vea Menos | |
| Carbon Black N220 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N220 Pigment Black 7 is black bead or granular or grain and amorphous solid, it is odorless with burning point more than 400°C, water insoluble, non-poisonous, stable chemical properties, excellent weather and light fastness. | |
| Carbon Black N234 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N234 Pigment Black 7 is recommended to be used in the surface material of high speed tires, and rubber products of high quality. | |
| Carbon Black N326 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N326 Pigment Black 7 is recommended to be used in the tread rubber for tires of high strength, low-heated including all-terrain vehicle tires, it also fits for conveyor belts, airproof products, and other rubber products of high quality. | |
| Carbon Black N330 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N330 Pigment Black 7 is recommended to be used in the surface material of tires, the rubber for cord layer, rubber for inner tubes, and other rubber products. | |
| Carbon Black N339 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N339 Pigment Black 7 is recommended to be used in the tread rubber for ordinary car tires, heavy lorry tires. As well as the covering rubber of conveyer belt, the rubber tubes, and the rubber products requires for high wear resistance. | |
| Carbon Black N375 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N375 Pigment Black 7 is recommended to be used in the tread rubber for ordinary car tires, heavy lorry tires. As well as the covering rubber of conveyer belt, the rubber tubes, and the rubber products requires for high wear resistance. | |
| Carbon Black N550 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N550 Pigment Black 7 is recommended to be used in cord layer oftires, sidewall of tires, the rubber material for extrusion or calendered goods. | |
| Carbon Black N660 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N660 Pigment Black 7 is recommended to be used in cord layer oftires, inner tubes, bicycle tires, rubber tubes, rubber tapes, cable ropes, shoes kind, and patterns. | |
| Carbon Black N774 Pigment Black 7 | Hangzhou Epsilon Chemical Co., Ltd. | Carbon Black N774 Pigment Black 7 is recommended to be used in tyre rubbers and belts. | |
| Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Interface & Performance | El surfactante Carbowet® 138 es un aditivo multifuncional para la humectación de pigmentos y sustratos. Este surfactante no iónico generalmente se utiliza solo o en combinación con un surfactante aniónico, Este rentable surfactante puede proporcionar rápi...Vea Mas El surfactante Carbowet® 138 es un aditivo multifuncional para la humectación de pigmentos y sustratos. Este surfactante no iónico generalmente se utiliza solo o en combinación con un surfactante aniónico, Este rentable surfactante puede proporcionar rápida humectación de sustratos y pigmentos y servir para una amplia gama de aplicaciones. Vea Menos | |
| Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Agente humectante de substrato, el Surfynol CT-211 se emplea en revestimientos a base de agua, tintas, adhesivos y muchos otros sistemas. Los niveles de uso estarán entre 0,1 y 3,0% en formulación total. | |
| Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Interface & Performance | En aplicaciones de pulido de pigmento, Surfynol CT-221 mejora el desarrollo de color mediante la humectación superior de las partículas de pigmento, y controla la formación de espuma debida al proceso de fabricación. Proporciona baja viscosidad en altos c...Vea Mas En aplicaciones de pulido de pigmento, Surfynol CT-221 mejora el desarrollo de color mediante la humectación superior de las partículas de pigmento, y controla la formación de espuma debida al proceso de fabricación. Proporciona baja viscosidad en altos cargamentos de pigmento y excelente estabilidad de dispersión. Vea Menos | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...Vea Mas Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. Vea Menos | |
| Cariflex™ IR0307 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...Vea Mas Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. Vea Menos | |
| Cariflex™ IR0310 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...Vea Mas Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. Vea Menos | |
| Cariflex™ IR0401 BU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...Vea Mas Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. Vea Menos | |
| Cariflex™ IR0401 SU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...Vea Mas Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. Vea Menos | |
| Catalizador Made 33 | Simon Quimica | Catalizador Made 33 es un endurecedor en recubrimientos que son poliuretanos de dos componentes para un secado rápido. Es viscosidad es 11 +/- copa Ford # 4, y el% de sólidos es de 33 +/- 2. | |
| Catalizador Made 50 | Simon Quimica | Catalizador Made 50 es un endurecedor en recubrimientos que son poliuretanos de dos componentes para el secado y alto brillo. Es viscosidad es 13 +/- copa Ford # 4, y el% de sólidos es de 36 +/- 2. | |
| CD406 | Sartomer Americas | CD-406 es un monómero de metacrilato cicloalifático difuncional que proporciona tasas de curación rápida y produce revestimientos duros y duraderos, con buena claridad y adherencia a diversos sustratos. CD-406 se recomienda para películas de ventanas, rev...Vea Mas CD-406 es un monómero de metacrilato cicloalifático difuncional que proporciona tasas de curación rápida y produce revestimientos duros y duraderos, con buena claridad y adherencia a diversos sustratos. CD-406 se recomienda para películas de ventanas, revestimientos de policarbonato, máscaras de soldadura, madera, revestimientos de plástico y de papel, imágenes fotográficas de película seca y revestimientos de superficies metalizadas. Vea Menos | |
| CD421A | Sartomer Americas | CD421A es un monómero metacrilato monofuncional de baja viscosidad que contiene un grupo cíclico estable y ligero. Es una alternativa al metacrilato de ciclohexilo con menos volatibilidad y menos olor. Presenta excelentes características de solvencia y bu...Vea Mas CD421A es un monómero metacrilato monofuncional de baja viscosidad que contiene un grupo cíclico estable y ligero. Es una alternativa al metacrilato de ciclohexilo con menos volatibilidad y menos olor. Presenta excelentes características de solvencia y buena adherencia a una variedad de sustratos. CD421A tiene mejor estabilidad térmica, buena resistencia térmica, buena dureza, buena resistencia al calor, buena resistencia al agua, buena resistencia a la intemperie, alta resistencia a la abrasión, alta resistencia a los impactos y baja contracción. Las aplicaciones sugeridas son adhesivos anaeróbicos, adhesivos estructurales, adhesivos de pernos de anclaje, plásticos y revestimientos industriales. Vea Menos | |
| CD535 | Sartomer Americas | CD535 es un monómero metacrilato monofuncional de baja viscosidad que se utiliza en una variedad de aplicaciones de curado con azonitrilo y peróxido de radicales libres, incluyendo síntesis de polímeros, revestimientos, adhesivos, selladores y modificació...Vea Mas CD535 es un monómero metacrilato monofuncional de baja viscosidad que se utiliza en una variedad de aplicaciones de curado con azonitrilo y peróxido de radicales libres, incluyendo síntesis de polímeros, revestimientos, adhesivos, selladores y modificación de polímeros. CD535 es un monómero de alta Tg y poca contracción que proporciona un buen curado de la superficie en aplicaciones con películas delgadas. Este producto ofrece la capacidad de un agente reticulante dual, alta resistencia y curado de la superficie. Las aplicaciones recomendadas incluyen revestimientos de metal, plástico y hormigón y selladores. Vea Menos | |
| CD542 | Sartomer Americas | CD542 es un monómero de baja volatilidad utilizado en la polimerización de radicales libres. Proporciona un buen equilibrio hidrófobo e hidrófilo. CD542 es una cadena principal hidrófoba para la solubilidad en álcali con poco olor. Las aplicaciones recome...Vea Mas CD542 es un monómero de baja volatilidad utilizado en la polimerización de radicales libres. Proporciona un buen equilibrio hidrófobo e hidrófilo. CD542 es una cadena principal hidrófoba para la solubilidad en álcali con poco olor. Las aplicaciones recomendadas incluyen adhesivos, revestimientos, máscaras de soldar, componentes electrónicos, componentes electrónicos fotorresistentes y fotopolímeros. Vea Menos | |
| CD545 | Sartomer Americas | CD545 es un dietilenglicol metil éter metacrilato. Es un monómero monofuncional adecuado para revestimientos curados con peróxidos, adhesivos, selladores y de emulsión o de acrílicos de solución. CD545 tiene buena adherencia, alta flexibilidad y baja cont...Vea Mas CD545 es un dietilenglicol metil éter metacrilato. Es un monómero monofuncional adecuado para revestimientos curados con peróxidos, adhesivos, selladores y de emulsión o de acrílicos de solución. CD545 tiene buena adherencia, alta flexibilidad y baja contracción. Las aplicaciones recomendadas incluyen acrílicos, adhesivos, sistemas de emulsión y revestimientos curados con peróxidos y selladores. Vea Menos | |
| CD552 | Sartomer Americas | CD552 es un monómero de metacrilato metoxilado (PEG 550) monofuncional que proporciona un excelente humectante, solubilidad en agua, baja Tg y curado rápido de la superficie. Se recomienda como producto químico intermedio para revestimientos y modificació...Vea Mas CD552 es un monómero de metacrilato metoxilado (PEG 550) monofuncional que proporciona un excelente humectante, solubilidad en agua, baja Tg y curado rápido de la superficie. Se recomienda como producto químico intermedio para revestimientos y modificación de polímeros. Las aplicaciones sugeridas incluyen productos químicos intermedios y la modificación de polímeros. Vea Menos | |
| CD553 | Sartomer Americas | CD553 es un monómero de acrilato (PEG 550) metoxilado monofuncional que contiene un excelente humectante, alta flexibilidad, baja Tg y curado rápido de la superficie. Las aplicaciones sugeridas incluyen químicos intermedios y modificación de polímeros. | |
| CD561 | Sartomer Americas | CD-561 es un monómero de diacrilato de hexanodiol alcoxilado que ofrece reducida irritación, excelente flexibilidad y mejor compatibilidad con sistemas de revestimientos a base de uretano y epoxi. CD-561 proporciona buena adherencia, buena resistencia a l...Vea Mas CD-561 es un monómero de diacrilato de hexanodiol alcoxilado que ofrece reducida irritación, excelente flexibilidad y mejor compatibilidad con sistemas de revestimientos a base de uretano y epoxi. CD-561 proporciona buena adherencia, buena resistencia a la intemperie y baja contracción. Las aplicaciones sugeridas incluyen revestimientos, revestimientos de pisos y metales, componentes electrónicos, tintas y tintas de inyección y de serigrafía. Vea Menos | |
| CD563 | Sartomer Americas | CD563 es un monómero de diacrilato de hexanodiol alcoxilado que ofrece reducida irritación y mejor flexibilidad que el diacrilato de hexanodiol. CD563 ofrece rápida respuesta de curado, baja volatilidad y humectación de pigmentos. Este producto tiene buen...Vea Mas CD563 es un monómero de diacrilato de hexanodiol alcoxilado que ofrece reducida irritación y mejor flexibilidad que el diacrilato de hexanodiol. CD563 ofrece rápida respuesta de curado, baja volatilidad y humectación de pigmentos. Este producto tiene buena resistencia química y resistencia al agua, alta resistencia a los impactos, adherencia y baja contracción. Las aplicaciones sugeridas incluyen revestimientos, componentes electrónicos y tintas. Vea Menos | |
| CD564 | Sartomer Americas | CD-564 es un monómero de diacrilato de hexanodiol alcoxilado que ofrece reducida irritación de la piel y gran utilidad en aplicaciones de revestimientos e impresión. CD-564 proporciona buena adherencia, buena resistencia a la intemperie y baja contracción...Vea Mas CD-564 es un monómero de diacrilato de hexanodiol alcoxilado que ofrece reducida irritación de la piel y gran utilidad en aplicaciones de revestimientos e impresión. CD-564 proporciona buena adherencia, buena resistencia a la intemperie y baja contracción. Las aplicaciones sugeridas incluyen revestimientos, revestimientos de pisos y metales, componentes electrónicos, tintas de inyección y tintas de serigrafía. Vea Menos | |
| CD590 | Sartomer Americas | CD590 es un monómero que posee un alto índice de refracción de líquidos y flexibilidad. El monómero es adecuado para aplicaciones donde se requiere adaptación de índice de refracción, adherencia y flexibilidad. | |
| CD595 | Sartomer Americas | CD595 es un monómero de acrilato líquido de color claro que presenta poco olor y alta reactividad. CD595 es útil en aplicaciones como revestimientos y tintas digitales y de serigrafía donde se necesita resistencia a la intemperie. Las propiedades de rendi...Vea Mas CD595 es un monómero de acrilato líquido de color claro que presenta poco olor y alta reactividad. CD595 es útil en aplicaciones como revestimientos y tintas digitales y de serigrafía donde se necesita resistencia a la intemperie. Las propiedades de rendimiento de este producto son adherencia, buena resistencia química, buena resistencia al agua, alta resistencia al impacto y baja contracción. Vea Menos | |
| CD730 | Sartomer Americas | CD730 es un monómero monofuncional de trietilenglicol etil éter metacrilato desarrollado para revestimientos curados con peróxidos, adhesivos, selladores y acrílicos de emulsión o de solución. Las propiedades de rendimiento incluyen buena adherencia, alta...Vea Mas CD730 es un monómero monofuncional de trietilenglicol etil éter metacrilato desarrollado para revestimientos curados con peróxidos, adhesivos, selladores y acrílicos de emulsión o de solución. Las propiedades de rendimiento incluyen buena adherencia, alta flexibilidad, alta resistencia al impacto y baja contracción. Vea Menos | |
| CD9043 | Sartomer Americas | CD9043 es un monómero de diacrilato de neopentil glicol alcoxilado. CD9043 ofrece buena humectación de pigmentos, resistencia a los solventes y flexibilidad en aplicaciones de tinta y revestimientos curables por radiación. CD9043 es particularmente adecua...Vea Mas CD9043 es un monómero de diacrilato de neopentil glicol alcoxilado. CD9043 ofrece buena humectación de pigmentos, resistencia a los solventes y flexibilidad en aplicaciones de tinta y revestimientos curables por radiación. CD9043 es particularmente adecuado para sustratos de plástico. Las propiedades de rendimiento de este producto incluyen adherencia, flexibilidad y resistencia a la intemperie. Las aplicaciones sugeridas son revestimientos, plásticos y tintas. Vea Menos | |
| CD9055 | Sartomer Americas | CD9055 es un acrilato ácido que promueve la adherencia en un número de diferentes substratos, incluyendo metal y vidrio. No contiene ningún (met) acrilato, por lo que produce formuladores de uso más amplio. Este producto no debe utilizarse en formulacione...Vea Mas CD9055 es un acrilato ácido que promueve la adherencia en un número de diferentes substratos, incluyendo metal y vidrio. No contiene ningún (met) acrilato, por lo que produce formuladores de uso más amplio. Este producto no debe utilizarse en formulaciones con aminas. CD9055 proporciona buena resistencia a la intemperie y baja contracción, y puede utilizarse para laminación y adhesivos sensibles a la presión, madera, plástico, revestimientos de metal, flexografía, tipografía, impresión offset y tintas de serigrafía rotativa. Vea Menos | |
| CD9075 | Sartomer Americas | CD9075 es un monómero de acrilato de laurilo alcoxilado. CD9075 proporciona buena humectación de pigmentos, flexibilidad y curado rápido en aplicaciones de tintas, revestimientos y adhesivos curables por radiación. CD9075 es particularmente adecuado para ...Vea Mas CD9075 es un monómero de acrilato de laurilo alcoxilado. CD9075 proporciona buena humectación de pigmentos, flexibilidad y curado rápido en aplicaciones de tintas, revestimientos y adhesivos curables por radiación. CD9075 es particularmente adecuado para sustratos de plástico. Las propiedades de rendimiento de este producto son adherencia y flexibilidad. Las aplicaciones sugeridas incluyen adhesivos, adhesivos de laminación, revestimientos sensibles a la presión, plásticos y tintas. Vea Menos | |
| Ceridust® 3910 | Clariant Plastics & Coatings Ltd. | Ceridust® 3910 is a micronized amide wax. | |
| Ceridust® 6050 M | Clariant Plastics & Coatings Ltd. | Ceridust® 6050 M is a micronized metallocene-based polypropylene wax. | |
| CF1-135 | NuSil Silicone Technology 1 | CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different subst...Vea Mas CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different substrates such as metals, ceramics, glass, some plastics and other silicone material. It is a one-component primer that is supplied in VM&P Napththa and it requires no mixing. Vea Menos | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...Vea Mas CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. Vea Menos | |
| CF1-3510 | NuSil Silicone Technology 1 | CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...Vea Mas CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). Vea Menos | |
| CF1-3710-2 | NuSil Silicone Technology 1 | CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in s...Vea Mas CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in shock and vibration dampening situations that require a flexible, light weight foam with exceptional radiation resistance and thermal insulation. This foam is especially useful where stability at higher and lower temperatures is required. Vea Menos | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...Vea Mas CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). Vea Menos | |
| CF19-2615 | NuSil Silicone Technology 1 | CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel...Vea Mas CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel displays and discrete optics that require a 1.41 refractive index. It can also provide protection to electronic components and assemblies against vibration, shock, moisture, dust and other environmental hazards. Vea Menos | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...Vea Mas CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. Vea Menos | |
| CF2-3521 | NuSil Silicone Technology 1 | CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for mo...Vea Mas CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for molding parts such as O-rings, stoppers, and seals. Vea Menos | |
| CF2-3521-2 | NuSil Silicone Technology 1 | CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also...Vea Mas CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also be used in applications that would require a solvent resistance. Vea Menos | |
| CF3-3521 | NuSil Silicone Technology 1 | CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a m...Vea Mas CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a medium hardness silicone and solvent resistance. This product is best utilized in applications that require an operating temperature range of -65 to 240°C (-85 to 465°F). Vea Menos | |
| CF5-3521-2 | NuSil Silicone Technology 1 | CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...Vea Mas CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. Vea Menos | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...Vea Mas CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. Vea Menos | |
| CH-4900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ult...Vea Mas CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ultraviolet, and ozone resistance to adhesives. Vea Menos | |
| CH-5800 Insulating Glass Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and oz...Vea Mas CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and ozone resistance as a sealant. Vea Menos | |
| CH-5900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural...Vea Mas CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural Sealant is used to provide various resistances to adhesives. Vea Menos | |
| Charmor™ PM15 | Perstorp | Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for pl...Vea Mas Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM15 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. Vea Menos | |
| Charmor™ PM40 | Perstorp | Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...Vea Mas Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 98%. Vea Menos | |
| Charmor™ Pro DP40 C40 | Perstorp | Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It ha...Vea Mas Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It has the same quality and technical properties as the standard Charmor™ PM40. Vea Menos | |
| Charmor™ PT40 | Perstorp | Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...Vea Mas Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 87%. Vea Menos | |
| Chlorinated PVC-YURON CPVC | Yuron New Material | La resina de PVC clorada de fase acuosa está clorada profundamente con resina de PVC a través del método de suspensión en fase acuosa líder a nivel internacional. Presenta buena solubilidad con tolueno, xileno y una variedad de hidrocarburos aromáticos y ...Vea Mas La resina de PVC clorada de fase acuosa está clorada profundamente con resina de PVC a través del método de suspensión en fase acuosa líder a nivel internacional. Presenta buena solubilidad con tolueno, xileno y una variedad de hidrocarburos aromáticos y disolventes con cetona. Este producto, además, tiene buena resistencia alcalina y ácida, resistencia a las condiciones climáticas, al agua, al aceite, al frío y al fuego. También presenta una buena compatibilidad con la mayoría de las resinas, como la resina alquídica, acrílica, la resina de caucho clorado y la resina de polietileno altamente clorado. Vea Menos | |
| Chlorinated Rubber-YURON CR-130 | Yuron New Material | YURON CR-130 es un caucho clorado que se suministra como polvo blanco. Se usa mayoritariamente como una materia prima adhesiva para aplicaciones de caucho a metal. Este producto es soluble en la mayoría de los disolventes aromáticos, como el tolueno o el ...Vea Mas YURON CR-130 es un caucho clorado que se suministra como polvo blanco. Se usa mayoritariamente como una materia prima adhesiva para aplicaciones de caucho a metal. Este producto es soluble en la mayoría de los disolventes aromáticos, como el tolueno o el xileno, y también es soluble en la mayoría de los ésteres. Vea Menos | |
| Chlorinated Rubber-YURON CR-170 | Yuron New Material | YURON CR-170 es un producto de caucho clorado que se suministra como polvo blanco. Se usa mayoritariamente como una materia prima adhesiva para aplicaciones de caucho a metal. Este producto es soluble en la mayoría de los disolventes aromáticos, como el t...Vea Mas YURON CR-170 es un producto de caucho clorado que se suministra como polvo blanco. Se usa mayoritariamente como una materia prima adhesiva para aplicaciones de caucho a metal. Este producto es soluble en la mayoría de los disolventes aromáticos, como el tolueno o el xileno, y también es soluble en la mayoría de los ésteres. Vea Menos | |
| Chlorinated Rubber-YURON CR-22 | Yuron New Material | YURON CR-22 es un producto de caucho clorado que se suministra como polvo blanco. Se añade, principalmente, a adhesivos de contacto a base de disolventes. Es soluble en la mayoría de los disolventes aromáticos, como el tolueno o el xileno, y también es so...Vea Mas YURON CR-22 es un producto de caucho clorado que se suministra como polvo blanco. Se añade, principalmente, a adhesivos de contacto a base de disolventes. Es soluble en la mayoría de los disolventes aromáticos, como el tolueno o el xileno, y también es soluble en la mayoría de los ésteres. Vea Menos | |
| Chlorinated Rubber-YURON CR-40 | Yuron New Material | YURON CR-40 es un caucho clorado que se suministra como polvo blanco. Se usa como aglutinante para revestimientos y adhesivos anticorrosivos. También se recomienda este producto como un aglutinante de combinación para resinas alquídicas y resinas adhesiva...Vea Mas YURON CR-40 es un caucho clorado que se suministra como polvo blanco. Se usa como aglutinante para revestimientos y adhesivos anticorrosivos. También se recomienda este producto como un aglutinante de combinación para resinas alquídicas y resinas adhesivas. Vea Menos | |
| Chlorinated Rubber-YURON CR-400 | Yuron New Material | YURON CR-400 es un caucho clorado que se suministra como polvo blanco. Se usa mayoritariamente como una materia prima adhesiva para aplicaciones de caucho a metal. Este producto es soluble en la mayoría de los disolventes aromáticos, como el tolueno o el ...Vea Mas YURON CR-400 es un caucho clorado que se suministra como polvo blanco. Se usa mayoritariamente como una materia prima adhesiva para aplicaciones de caucho a metal. Este producto es soluble en la mayoría de los disolventes aromáticos, como el tolueno o el xileno, y también es soluble en la mayoría de los ésteres. Vea Menos | |
| Chlorinated Rubber-YURON CR-90 | Yuron New Material | YURON CR-90 es un caucho clorado que se suministra como polvo blanco y es inmiscible en agua. Se recomienda este producto como un aglutinante para revestimientos y adhesivos anticorrosivos y como aglutinante de combinación para resinas alquídicas y resina...Vea Mas YURON CR-90 es un caucho clorado que se suministra como polvo blanco y es inmiscible en agua. Se recomienda este producto como un aglutinante para revestimientos y adhesivos anticorrosivos y como aglutinante de combinación para resinas alquídicas y resinas acrílicas. Vea Menos | |
| Chrome Oxide Green GM5066 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green GM5066 Pigment Green 17 is a heat stable, super fine and micronized chromium oxide green pigment. It fulfills the higher requirements necessary in the paint and coating industry. The product is also used for coloring plastics or masterb...Vea Mas Chrome Oxide Green GM5066 Pigment Green 17 is a heat stable, super fine and micronized chromium oxide green pigment. It fulfills the higher requirements necessary in the paint and coating industry. The product is also used for coloring plastics or masterbatches and can be applied in the field of Wood Plastic Composites. Moreover, it can also be applied in the paper industry for the coloration of laminate paper. GM5066 exhibits good dispersibility, even in processes which have short dwell times and relatively low shear forces. Vea Menos | |
| Chrome Oxide Green GN4058 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green GN4058 Pigment Green 17 is a heat stable chromium oxide green pigment. It is used extensively in the coloration of construction materials and in the paper industry in the field of colored laminate papers. In addition, the pigment can al...Vea Mas Chrome Oxide Green GN4058 Pigment Green 17 is a heat stable chromium oxide green pigment. It is used extensively in the coloration of construction materials and in the paper industry in the field of colored laminate papers. In addition, the pigment can also be used for the coloration of glazes, enamels or engobes in the ceramic industry. The product exhibits good dispersibility, excellent lightfastness and weather stable. GN4058 is also used particularly for applications where high heat stability is required, it is very low chrome (VI) content. Vea Menos | |
| Chrome Oxide Green GP7450 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green GP7450 Pigment Green 17 is specially made for paints and coatings application. Compared with normal grade chrome oxide green, GP7450 offers 10% higher tinting strength and hiding power while lower prices. Furthermore, it has less residu...Vea Mas Chrome Oxide Green GP7450 Pigment Green 17 is specially made for paints and coatings application. Compared with normal grade chrome oxide green, GP7450 offers 10% higher tinting strength and hiding power while lower prices. Furthermore, it has less residue, excellent light and weather resistance, as well as heat resistance. Vea Menos | |
| Chrome Oxide Green GS1018 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green GS1018 Pigment Green 17 is a heat stable chrome oxide greenpigment. It is used extensively in the coloration of construction materials, which can improve UV stability. In addition, the pigment can also be used for the coloration of glaz...Vea Mas Chrome Oxide Green GS1018 Pigment Green 17 is a heat stable chrome oxide greenpigment. It is used extensively in the coloration of construction materials, which can improve UV stability. In addition, the pigment can also be used for the coloration of glazes, enamels or engobes in the ceramic industry. GS1018 exhibits good dispersibility, easy to break down and distribute to reach its final tinting strength quickly. It is very lightfast and weather stable. Vea Menos | |
| Chrome Oxide Green GX8090 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green GX8090 Pigment Green 17 is a heat stable chromium oxide green pigment. It is used extensively in the coloration of construction materials and in the paper industry in the field of colored laminate papers. In addition, the pigment can al...Vea Mas Chrome Oxide Green GX8090 Pigment Green 17 is a heat stable chromium oxide green pigment. It is used extensively in the coloration of construction materials and in the paper industry in the field of colored laminate papers. In addition, the pigment can also be used for the coloration of glazes, enamels or engobes in the ceramic industry. The product exhibits good dispersibility, excellent light fastness and weather stability. GX8090 is also used particularly for applications where high heat stability is required. It is very low chrome (VI) content. Vea Menos | |
| Chrome Oxide Green M5507 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green M5507 Pigment Green 17 is a high quality chrome oxide greenwhich can be used to produce chrome metal. In turn, chrome metal can be combined with other metals to produce high performance super-alloys used in the aerospace industry. Chrom...Vea Mas Chrome Oxide Green M5507 Pigment Green 17 is a high quality chrome oxide greenwhich can be used to produce chrome metal. In turn, chrome metal can be combined with other metals to produce high performance super-alloys used in the aerospace industry. Chrome oxide green M5507 is a fine dark green powder. When mixed with aluminium and potassium dichromate, using the alumino-thermic process, chromic oxide produces high purity chromium metal. This is a vital ingredient in the production of the high performance super-alloys used in the aerospace industry. Furthermore, M5507 can also be used in military and camouflage coatings applications which require high reflectivity in the infrared range. Vea Menos | |
| Chrome Oxide Green PT5376 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green PT5376 Pigment Green 17 is high quality pigment grade chrome oxide green. Compared with other green pigments, chromic oxide gives excellent light fastness, durability, stability and performance. It is also unaffected by acids, alkalis a...Vea Mas Chrome Oxide Green PT5376 Pigment Green 17 is high quality pigment grade chrome oxide green. Compared with other green pigments, chromic oxide gives excellent light fastness, durability, stability and performance. It is also unaffected by acids, alkalis and solvents. Vea Menos | |
| Chrome Oxide Green RT4906 Pigment Green 17 | Hangzhou Epsilon Chemical Co., Ltd. | Chrome Oxide Green RT4906 Pigment Green 17 is high quality chrome oxide green.This dark green powder with metal luster is insoluble in water and hardly soluble in acid. With a melting point of 2300°C and boiling point 4000°C, chromic oxide is commonly use...Vea Mas Chrome Oxide Green RT4906 Pigment Green 17 is high quality chrome oxide green.This dark green powder with metal luster is insoluble in water and hardly soluble in acid. With a melting point of 2300°C and boiling point 4000°C, chromic oxide is commonly used in the production of refractory bricks to line metallurgical and glass furnaces and kilns, these bricks are often used in glass furnace linings, in the steel production process or in the chemical industry. while the shaped bricks in the fire door of steel furnace require lower iron and aluminum content, some even is needed to be desulfidation. Vea Menos | |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...Vea Mas CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. Vea Menos | |
| CHS-Alkyd AL 2900 | Spolchemie | CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd ...Vea Mas CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd AL 2900 is primarily used for fast drying high performance topcoats and industrial primers. Vea Menos | |
| CHS-Alkyd AL 3220 | Spolchemie | CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to...Vea Mas CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to be around 32%. CHS-Alkyd AL 3220 is primarily used for non-yellowing coatings for wood and metal surfaces. Vea Menos | |
| CHS-Alkyd AL 3701 | Spolchemie | CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. Th...Vea Mas CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 37%. This product is primarily used for fast drying, lift resistant and anticorrosion coatings. Vea Menos | |
| CHS-Alkyd AL 3961 | Spolchemie | CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimat...Vea Mas CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimated to be around 29%. This product has high hydroxyl content and paint stability. CHS-Alkyd AL 3961 is primarily used for fast drying water and solvent borne primers, topcoats. Vea Menos | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...Vea Mas CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. Vea Menos | |
| CHS-Alkyd C 351 E 75 | Spolchemie | CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated ...Vea Mas CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 E 75 is primarily used for stove coatings and paints constructed on nitrocellulose. Vea Menos | |
| CHS-Alkyd C 351 X 60 | Spolchemie | CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be a...Vea Mas CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 X 60 is primarily used for stove coatings and paints fabricated on nitrocellulose. Vea Menos | |
| CHS-Alkyd LUR 740 NN 80 | Spolchemie | CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....Vea Mas CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. Vea Menos | |
| CHS-Alkyd M 552 WX 60 | Spolchemie | CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder...Vea Mas CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder for producing universal coatings. This product is primarily used in formulations for anti-corrosive priming coats that are combined with chlorinated rubber and phenolic resins or amino resins. Vea Menos | |
| CHS-Alkyd S 401 X 55 | Spolchemie | CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...Vea Mas CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. Vea Menos | |
| CHS-Alkyd S 401 X 60 | Spolchemie | CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...Vea Mas CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. Vea Menos | |
| CHS-Alkyd S 471 WX 55 | Spolchemie | CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is...Vea Mas CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is primarily used for producing priming paints, enamels and quick drying coatings and lacquers. Vea Menos | |
| CHS-Alkyd S 471 X 60 | Spolchemie | CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...Vea Mas CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. Vea Menos | |
| CHS-Alkyd S 491 W 55 | Spolchemie | CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W ...Vea Mas CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W 55 is primarily used for manufacture in primer coatings for metal surfaces. Vea Menos | |
| CHS-Alkyd S 491 WB 55 | Spolchemie | CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...Vea Mas CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. Vea Menos | |
| CHS-Alkyd S 618 W 80 | Spolchemie | CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood...Vea Mas CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood and metal paints that are intended for being applied on exterior surfaces. Vea Menos | |
| CHS-Alkyd S 621 W 60 | Spolchemie | CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in w...Vea Mas CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. Vea Menos | |
| CHS-Alkyd S 622 N 60 | Spolchemie | CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic ...Vea Mas CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic content is just under one percent. This product is primarily used for air-drying coatings, enamels, lacquers and wood stains for exteriors and interiors. Vea Menos | |
| CHS-Alkyd S 622 W 55 | Spolchemie | CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in w...Vea Mas CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. Vea Menos | |
| CHS-Alkyd S 623 NN 50 | Spolchemie | CHS-Alkyd S 623 NN 50 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 50 percent solution in de-aromatized white spirit with flash point higher...Vea Mas CHS-Alkyd S 623 NN 50 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 50 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. Aromatic content is just under 1 percent. The primary use for this product is for environmentally friendly air-drying coatings that can be used on interiors and exteriors. Vea Menos | |
| CHS-Alkyd S 623 NN 60 | Spolchemie | CHS-Alkyd S 623 NN 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 60 percent solution in de-aromatized white spirit with flash point higher...Vea Mas CHS-Alkyd S 623 NN 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 60 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. Aromatic content is just under 1 percent. The primary use for this product is for environmentally friendly air-drying coatings that can be used on interiors and exteriors. Vea Menos | |
| CHS-Alkyd S 652 NN 70 | Spolchemie | CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash poi...Vea Mas CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 652 NN 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. Vea Menos | |
| CHS-Alkyd S 653 W 70 | Spolchemie | CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily use...Vea Mas CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. Vea Menos | |
| CHS-Alkyd S 670 NN 75 | Spolchemie | CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash p...Vea Mas CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 670 NN 75 is primarily used for air-drying wood and metal coatings for interior and exterior use. Vea Menos | |
| CHS-Alkyd ST 551 N 50 | Spolchemie | CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has...Vea Mas CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has as gel like structure, the aromatic content is less than 1 percent. This product is primarily used for air-drying thixotropic synthetic paints that are used for interiors and exteriors as penetrates and lacquers. It is used to prevent pigment and fillers from settling in synthetic paints. Vea Menos | |
| CHS-Alkyd SU 621 N 50 | Spolchemie | CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic conte...Vea Mas CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. Vea Menos | |
| CHS-Alkyd SU 632 N 60 | Spolchemie | CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is ju...Vea Mas CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. Vea Menos |
