| 4HBA | Kowa Europe GmbH | 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coat...Vea Mas 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coatings, water borne coatings, powder coatings, adhesives, urethane finishes, and UV inkjet ink. Vea Menos | Request Sample |
| ADDITOL® XL 122 | Allnex | Aditivo de pintura para aumentar la resistencia al rayado y al deslizamiento, y para mejorar el flujo y la nivelación en pinturas de secado del aire y al horno. | Request Sample |
| ADDITOL® XW 329 | Allnex | Aditivo de pintura para aumentar la resistencia al rayado, el deslizamiento y la nivelación, particularmente en las pinturas diluibles en agua. | Request Sample |
| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| AQUACER® 513 | BYK | Ceras de emulsión para mejorar la protección superficial de los sistemas de la pintura y de las tintas de impresión acuosos. Emulsión no-iónica basada en una cera oxidada del polietileno de dispersión alta. | |
| AQUACER® 552 | BYK | Ceras de emulsión para mejorar la protección superficial de los sistemas de la pintura y de la tintas de impresión, acuosos. Emulsión no iónica basada en una cera oxidada del polietileno de dispersión alta. | |
| AquaFLON® 178G (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 178G es una dispersión acuosa estable al 50% de una mezcla de polietileno (PE) de peso molecular medio y politetrafluoroetileno (PTFE). La mezcla única de PE y PTFE ofrece deslizamiento mejorado y óptima resistencia a la abrasión. Su tamaño de p...Vea Mas AquaFLON® 178G es una dispersión acuosa estable al 50% de una mezcla de polietileno (PE) de peso molecular medio y politetrafluoroetileno (PTFE). La mezcla única de PE y PTFE ofrece deslizamiento mejorado y óptima resistencia a la abrasión. Su tamaño de partícula más grande maximiza el rendimiento y reduce el costo de formulación en comparación con micro dispersiones y emulsiones. AquaFLON® 178G tiene un impacto moderado en el brillo y la claridad, que es lo deseado en sistemas de alto brillo. AquaFLON® 178G también maximiza la carga activa con fácil manejo, excelente estabilidad y dispersión. Vea Menos | |
| AquaFLON® 50 (PTFE Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 50 es una dispersión en agua estable al 50% de politetrafluoroetileno (PTFE). En revestimientos a base de agua y lubricantes, ofrece excelentes propiedades de lubricación y alta resistencia al deslizamiento y la abrasión. Sus partículas pequeñas...Vea Mas AquaFLON® 50 es una dispersión en agua estable al 50% de politetrafluoroetileno (PTFE). En revestimientos a base de agua y lubricantes, ofrece excelentes propiedades de lubricación y alta resistencia al deslizamiento y la abrasión. Sus partículas pequeñas de tamaño uniforme (1 a 3 micrones) solubles en agua facilitan su incorporación en una amplia gama de aplicaciones, incluidos revestimientos para metales, plásticos, vidrio y papel; lubricantes para liberación de moldes y lubricantes para corte y estampado de metal. Vea Menos | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® 605 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical polyethylene wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in inks. | |
| AquaFLON® 797 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 797 es una dispersión acuosa de una mezcla de alto peso molecular de cera de polietileno / PTFE. En tintas y revestimientos a base de agua, brinda buena resistencia al roce y el deslizamiento. Este producto presenta partículas más grandes vs. a ...Vea Mas AquaFLON® 797 es una dispersión acuosa de una mezcla de alto peso molecular de cera de polietileno / PTFE. En tintas y revestimientos a base de agua, brinda buena resistencia al roce y el deslizamiento. Este producto presenta partículas más grandes vs. a micro dispersiones y emulsiones, control de deslizamiento y resistencia al roce y moderado impacto sobre el brillo. Es un tensioactivo no iónico para buena dispersión y compatibilidad y posee una excelente estabilidad en almacenamiento sin uso de resinas o aglutinantes. Vea Menos | |
| AquaFLON® MG (PTFE / Wax Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. AquaFLON® MG is recommended for thin film water based compositions like printing inks, and overprint varnishes. | |
| AQUAMAT® 263 | BYK | Dispersiones acuosas de cera para matizado, para mejorar las propiedades de superficie de los sistemas de la pintura y de las tintas de impresión, transmitidos por agua. Dispersión oxidada de cera de polietileno de dispersión alta. | |
| CERAFLOUR® 920 | BYK | Polímero orgánico micronizado para sistemas de pintura de estera transmitidos por agua y transmitidos por solvente. Polímero orgánico micronizado. | |
| CERAFLOUR® 999 | BYK | CERAFLOUR® 999 is an extra-fine, micronized PTFE-modified polyethylene wax for organic cosolvent-containing aqueous, solvent-borne, solvent-free, and UV coating systems, powder coatings, and printing inks to improve surface properties such as scratch and ...Vea Mas CERAFLOUR® 999 is an extra-fine, micronized PTFE-modified polyethylene wax for organic cosolvent-containing aqueous, solvent-borne, solvent-free, and UV coating systems, powder coatings, and printing inks to improve surface properties such as scratch and abrasion resistance. Vea Menos | |
| CeraSPERSE UV 636 (Carnauba Wax UV Dispersion) | Shamrock Technologies b.v.b.a. | EverGlide UV 636 es una emulsión al 25% de cera de carnaúba en TRPGDA para tintas y revestimientos UV. Brinda resistencia al deslizamiento y desgaste, mientras mantiene el brillo y la claridad. Presenta una cera con partículas de tamaño pequeño (2 a 3 mic...Vea Mas EverGlide UV 636 es una emulsión al 25% de cera de carnaúba en TRPGDA para tintas y revestimientos UV. Brinda resistencia al deslizamiento y desgaste, mientras mantiene el brillo y la claridad. Presenta una cera con partículas de tamaño pequeño (2 a 3 micrones) que la hacen ideal para muchas películas delgadas y transparentes. Este producto se proporciona como una suspensión estable y uniforme sin necesidad de añadir agentes tensioactivos o de dispersión. Se puede incorporar con una simple mezcla. Vea Menos | |
| CeraSPERSE UV 691 (Carnauba Wax UV Dispersion) | Shamrock Technologies b.v.b.a. | CeraSPERSE UV 691 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| EBECRYL® 50 | Allnex | EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured ...Vea Mas EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured coatings and inks. Besides its high reactivity, EBECRYL® 50 improves the hardness and solvent resistance of cured coatings and inks. This product is particularly useful in offset inks, flexo inks and overprint varnishes. Vea Menos | Request Sample |
| EBECRYL® 8602 | Allnex | EBECRYL® 8602 es un acrilato de uretano alifático funcional. Después de la polimerización, las películas de EBECRYL® 8602 presentan una mejora significativa en la resistencia a la intemperie en comparación con el acrilato de uretano alifático hexafunciona...Vea Mas EBECRYL® 8602 es un acrilato de uretano alifático funcional. Después de la polimerización, las películas de EBECRYL® 8602 presentan una mejora significativa en la resistencia a la intemperie en comparación con el acrilato de uretano alifático hexafuncional sin comprometer la resistencia al rayado y a la abrasión. Además, EBECRYL® 8602 no contiene compuestos orgánicos de estaño, metales pesados* o quinonas añadidos intencionadamente. Vea Menos | Request Sample |
| EBECRYL® 895 | Allnex | Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and E...Vea Mas Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required. Vea Menos | Request Sample |
| EDAPLAN® LA 410 | Munzing Chemie | EDAPLAN® LA 410 is a colourless to slightly yellowish liquid, suitable for all non-aqueous coating and printing ink systems. It improves surface properties and can be used in curtain coatings. EDAPLAN® LA 410 is recommended for improved scratch resistance...Vea Mas EDAPLAN® LA 410 is a colourless to slightly yellowish liquid, suitable for all non-aqueous coating and printing ink systems. It improves surface properties and can be used in curtain coatings. EDAPLAN® LA 410 is recommended for improved scratch resistance and slip of metallic effect lacquers and varnishes. It prevents surface defects like craters and orange peel. EDAPLAN® LA 410 provides defoaming and degassing. Vea Menos | |
| FluoroSLIP® 225 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 225 is a PTFE and low molecular weight micronized polyethylene wax blend. FluoroSLIP® 225 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 511 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 511 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 511 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 605 (PTFE / Polytheylene Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 605 is a spherical polyethylene wax and PTFE blend. FluoroSLIP® 605 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSPERSE® 153V (PTFE Dispersion) | Shamrock Technologies b.v.b.a. | FluoroSPERSE® 153V is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 153V is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 6153V (PTFE Dispersion) | Shamrock Technologies b.v.b.a. | FluoroSPERSE® 6153V is a micronized PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 6153V is recommended for use in offset inks. | |
| FluoroSPERSE® 755 (PTFE Dispersion) | Shamrock Technologies b.v.b.a. | FluoroSPERSE® 755 is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 755 is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 7908 (PTFE Dispersion) | Shamrock Technologies b.v.b.a. | FluoroSPERSE® 7908 is a PTFE (polytetrafluoroethylene) micropowder dispersion in a lithographic varnish. | |
| Hydrocer 257 (Polyethylene Wax Disperison) | Shamrock Technologies b.v.b.a. | Hydrocer 257 is polyethylene wax in a non-ionic aqueous dispersion recommended for water based ink systems. | |
| Hydrocer 357 (Polyethylene Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 357 is a spherical polyethylene wax in a non-ionic aqueous dispersion recommended for water based ink systems. | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer EE 95 (Polyethylene Wax Emulsion) | Shamrock Technologies b.v.b.a. | Hydrocer EE 95 is an anionic, high-density polyethylene wax emulsion. Hydrocer EE-95 is used in liquid inks for flexographic systems. | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies b.v.b.a. | Hydrocer EP 91 is an anionic aqueous paraffin wax emulsion. Hydrocer EP 91 is recommended for use in aqueous ink systems. | |
| mju:wax® 2594 | Ceronas GmbH & Co., KG | mju:wax® 2594 is a micronised wax additive in the form of a white powder. This product has excellent matting properties combined with good transparency and silky touch. It can provide good scratch and abrasion resistance, and is often used in solvent or w...Vea Mas mju:wax® 2594 is a micronised wax additive in the form of a white powder. This product has excellent matting properties combined with good transparency and silky touch. It can provide good scratch and abrasion resistance, and is often used in solvent or water based systems and in wood coatings, printing inks, and lacquers. Vea Menos | |
| mju:wax® 2739 | Ceronas GmbH & Co., KG | mju:wax® 2739 is a micronised PE/carnauba/PTFE wax compound in the form of an off-white powder. This product can improve scratch resistance, slip, and anti blocking properties, and can provide excellent metal marking resistance as well as strong reductio...Vea Mas mju:wax® 2739 is a micronised PE/carnauba/PTFE wax compound in the form of an off-white powder. This product can improve scratch resistance, slip, and anti blocking properties, and can provide excellent metal marking resistance as well as strong reduction of the coefficient of friction. It is often used in lacquers, can coatings, and graphic arts. Vea Menos | |
| mju:wax® 4001 | Ceronas GmbH & Co., KG | mju:wax® 4001 is a micronised amide wax with high melting temperature, and is in the form of a white powder. This product can improve scratch resistance, slip, and anti blocking properties, and is used as an additive in printing inks, lacquers, powder coa...Vea Mas mju:wax® 4001 is a micronised amide wax with high melting temperature, and is in the form of a white powder. This product can improve scratch resistance, slip, and anti blocking properties, and is used as an additive in printing inks, lacquers, powder coatings, and wood coatings to modify the surface properties. Vea Menos | |
| mju:wax® 4253 | Ceronas GmbH & Co., KG | mju:wax® 4253 is a micronised wax compound with PTFE in the form of a white powder. This product can improve scratch resistance and slip properties, and is used as an additive in water or solvent based lacquers, printing inks, and powder coatings to modif...Vea Mas mju:wax® 4253 is a micronised wax compound with PTFE in the form of a white powder. This product can improve scratch resistance and slip properties, and is used as an additive in water or solvent based lacquers, printing inks, and powder coatings to modify the surface properties. Vea Menos | |
| mju:wax® 4700 | Ceronas GmbH & Co., KG | mju:wax® 4700 is a micronised "green" wax compound in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in lacquers, printing inks, and wood coatings. | |
| mju:wax® 4810 | Ceronas GmbH & Co., KG | mju:wax® 4810 is a micronised polypropylene wax compound in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in lacquers, printing inks, powder coatings, and wood coatings to ...Vea Mas mju:wax® 4810 is a micronised polypropylene wax compound in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in lacquers, printing inks, powder coatings, and wood coatings to modify the surface properties. Vea Menos | |
| mju:wax® 5420 | Ceronas GmbH & Co., KG | mju:wax® 5420 is a micronised PE/amide wax compound in the form of an off-white powder. This product can improve scratch resistance, anti blocking and matting properties in lacquers, graphic arts, and wood coatings | |
| mju:wax® 7200 | Ceronas GmbH & Co., KG | mju:wax® 7200 is a micronised carnauba wax compound in the form of an off-white powder. This product can improve scratch resistance and slip properties, and is used as an additive in graphic arts, can coatings, water and solvent based systems. | |
| mju:wax® 8400 | Ceronas GmbH & Co., KG | mju:wax® 8400 is a micronised polypropylene wax compound in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in lacquers, printing inks, powder coatings, and wood coatings to ...Vea Mas mju:wax® 8400 is a micronised polypropylene wax compound in the form of a white powder. This product can improve scratch resistance and anti blocking properties, and is used as an additive in lacquers, printing inks, powder coatings, and wood coatings to modify the surface properties. Vea Menos | |
| NANOBYK®-3620 | BYK | NANOBYK®-3620 es una dispersión acuosa libre de VOC formada por partículas nanohíbridas, para proteger capas superiores brillosas, acuosas, pigmentadas y no pigmentadas del rayado y la abrasión. Esta propiedad protectora surte efecto rápidamente solamente...Vea Mas NANOBYK®-3620 es una dispersión acuosa libre de VOC formada por partículas nanohíbridas, para proteger capas superiores brillosas, acuosas, pigmentadas y no pigmentadas del rayado y la abrasión. Esta propiedad protectora surte efecto rápidamente solamente luego de un período de secado. NANOBYK®-3620 no tiene influencias negativas en el brillo y la transparencia, y por lo tanto, es especialmente apropiada para capas transparentes. Vea Menos | |
| NANOPOL® C 750 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 750 shows very high performance in scratch- and abrasion-resistance without influencing the gloss or transparency of waterborne coatings. | Request Sample |
| NANOPOL® C 784 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 784 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the coating. | Request Sample |
| NANOPOX® C 620 | Evonik Operations GmbH, BL Coating Additives | NANOPOX® C 620 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured cationic UV-coating. | Request Sample |
| Neptune 1-N1 (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | Neptuno 1 N1 es una cera polietileno de peso molecular mediano. Proporciona deslizamiento excelente, así como buen desgaste, abrasión y resistencia al rayado de uña. Es muy estable en la formulación y ayuda a evitar la falta de despumador. | |
| Neptune 1-N5 (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based inks. | |
| Neptune 5223 (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | Neptune 5223 is a polyethylene wax that has been oxidized to provide water wettability and has a uniform melting range peaking at 97°C. Neptune 5223 is recommended for water based liquid and UV inks. | |
| R-8004 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...Vea Mas R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8004 has ≥70% siloxane content. Vea Menos | |
| R-8005 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...Vea Mas R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8005 has ≥50% siloxane content. Vea Menos | |
| Raybo 43 MarHard | Raybo Chemical | Raybo 43 MarHard is a silicone-free additive in a workable paste to thin liquid form, depending on temperature. This product is most commonly used to improve scratch and mar resistance in solventborne bake coating and ink system applications. | |
| Raybo 68 HydroSlip | Raybo Chemical | Raybo 68 HydroSlip is a coating and ink additive in a white liquid form. This product is most commonly used to improve flow control, mar resistance, and slip in water-based and water-reducible coating and ink system applications. | |
| S-381-N5 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies b.v.b.a. | S-381 N5 es una mezcla modificada y micronizada de ceras para un rendimiento similar al polipropileno con buena resistencia UV. Es un agente de control de brillo para revestimientos de bobina a base de resinas, revestimientos en polvo, para maderas e indu...Vea Mas S-381 N5 es una mezcla modificada y micronizada de ceras para un rendimiento similar al polipropileno con buena resistencia UV. Es un agente de control de brillo para revestimientos de bobina a base de resinas, revestimientos en polvo, para maderas e industriales y también para tintas y revestimientos UV. Con S-381 N5, el formulador puede controlar el brillo mientras mantiene las características de dureza de superficie. S-381 N5 puede mezclarse en los revestimientos para producir acabados satinados o mates con excelente resistencia al rayado y reducción COF. Un revestimiento mate con S-381 N5 tendrá una superficie libre de pulido o bruñido de pigmento, problemas típicos experimentados con sílice. Vea Menos | |
| S-390-C (Spherical Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-390-C is a spherical polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for liquid and paste inks. | |
| S-394-N1 (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-394-N1 is a polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-N1 is recommended for liquid and paste inks. | |
| S-394-N5 (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-394-N5 is a polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-N5 is recommended for liquid and paste inks. | |
| S-394-SD4 (Spherical Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-394-SD4 is a spherical polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for liquid and paste inks. | |
| S-395-N5 (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-395-N5 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N5 is recommended for liquid and paste inks. | |
| S-395-SP5 (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-395-SP5 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-SP5 is recommended for liquid and paste inks. | |
| S-413 (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-413 is a polyethylene wax showing multiple melting peaks ranging from 107 – 142°C. S-413 is recommended for offset inks. | |
| Silmer® ACR Di-50 | Siltech Corp. | Silmer® ACR Di-50 is a high molecular weight silicone acrylate fluid. It is used to give permanent slip and mar resistance to UV-curable coatings systems. Silmer®ACR Di-50 is used to improve surface smoothness and scratch resistance in UV-curable systems....Vea Mas Silmer® ACR Di-50 is a high molecular weight silicone acrylate fluid. It is used to give permanent slip and mar resistance to UV-curable coatings systems. Silmer®ACR Di-50 is used to improve surface smoothness and scratch resistance in UV-curable systems. The acrylate functionality gives a permanent binding into the matrix of the coating. It is a 100% active silicone that is soluble in aliphatic and aromatic solvents. Vea Menos | |
| Siltech® C-173 | Siltech Corp. | Siltech® C-173 is a 52% active carbinol functional silicone glycol copolymer that is primarily used to improve leveling and mar resistance in solvent based systems. Siltech® C-173 is designed for use in both solvent based and solvent free systems. It incr...Vea Mas Siltech® C-173 is a 52% active carbinol functional silicone glycol copolymer that is primarily used to improve leveling and mar resistance in solvent based systems. Siltech® C-173 is designed for use in both solvent based and solvent free systems. It increases surface slip, improves leveling, gloss, substrate wetting & gives anti-blocking benefits. It also prevents formation of Bernard cells and reduces the surface tension. It provides benefits that are not obtained with conventional silicone oil additives. Vea Menos | |
| Siltech® C-174 | Siltech Corp. | Siltech® C-174 is a 52% active carbinol functional silicone glycol copolymer that is primarily used to improve leveling and mar resistance in solvent based systems. Siltech® C-174 is primarily used in solvent-based systems although it is also suitable for...Vea Mas Siltech® C-174 is a 52% active carbinol functional silicone glycol copolymer that is primarily used to improve leveling and mar resistance in solvent based systems. Siltech® C-174 is primarily used in solvent-based systems although it is also suitable for solvent free systems. It increases slip and gloss in addition to providing substrate wetting and leveling. It also prevents the formation of Benard cells. Vea Menos | |
| Siltech® C-20 | Siltech Corp. | Siltech® C-20 is a carbinol functional silicone glycol copolymer surfactant. It is a solvent free, 100% active product. It imparts mar resistance and better slip to coatings. Siltech® C-20 additive can be used in solvent, water-based or solvent=less syste...Vea Mas Siltech® C-20 is a carbinol functional silicone glycol copolymer surfactant. It is a solvent free, 100% active product. It imparts mar resistance and better slip to coatings. Siltech® C-20 additive can be used in solvent, water-based or solvent=less systems. It effectively reduces surface tension and provides mar resistance or slip finishes. It also provides other benefits such as leveling, wetting, flow-out and aids pigment dispersion. It is effective at low concentrations. The recommended concentration used is between-% weight percent based on total solids. It should be added during the final thinning step. Preliminary tests in laboratory or a small-scale production unit necessary to obtain optimum results. Vea Menos | |
| Siltech® C-215 | Siltech Corp. | Siltech® C-215 is a reactive silicone glycol surfactant with carbinol functionality supplied at a 10% concentration in xylene. Siltech® C-215 is used in solvent-based formulations to provide anti-blocking benefits, and to improve slip & mar, rub and ab...Vea Mas Siltech® C-215 is a reactive silicone glycol surfactant with carbinol functionality supplied at a 10% concentration in xylene. Siltech® C-215 is used in solvent-based formulations to provide anti-blocking benefits, and to improve slip & mar, rub and abrasion resistance. It also prevents pigment separation and improves flow-out, wetting, leveling and gloss. Vea Menos | |
| Siltech® C-241 | Siltech Corp. | Siltech® C-241 is a polyether siloxane copolymer that is primarily used to eliminate cratering and improve slip. It is used in solvent-based, water-based and energy curing coatings and inks formulations to eliminate cratering, improve slip, anti-blocking ...Vea Mas Siltech® C-241 is a polyether siloxane copolymer that is primarily used to eliminate cratering and improve slip. It is used in solvent-based, water-based and energy curing coatings and inks formulations to eliminate cratering, improve slip, anti-blocking and flow. Siltech®C-241 prevents pigment flotation and provides mar resistance. Vea Menos | |
| Siltech® C-261 | Siltech Corp. | Siltech® C-261 is a modified silicone glycol copolymer diluted in butyl acetate. It provides leveling, substrate wetting and mar and abrasion resistance to solvent-based paints, inks, and coatings. | |
| Siltech® C-32 | Siltech Corp. | Siltech® C-32 is an alkyl aryl functional silicone fluid. It imparts leveling, de-aeration, mar resistance and pigment treatment without affecting the coatability or adhesion of the treated surface. Siltech® C-32 additive is used as an additive in solvent...Vea Mas Siltech® C-32 is an alkyl aryl functional silicone fluid. It imparts leveling, de-aeration, mar resistance and pigment treatment without affecting the coatability or adhesion of the treated surface. Siltech® C-32 additive is used as an additive in solvent, solvent-less and powder systems. It provides such benefits as leveling, de-aeration, mar resistance and pigment treatment. Vea Menos | |
| Siltech® C-608 | Siltech Corp. | Siltech®C-608 is a 100% active non-foaming water-soluble silicone glycol copolymer. It provides slip and mar resistance to water-borne based paints, inks and coatings. Siltech® C-608 is used as a non-foaming additive for water-borne systems. The primary f...Vea Mas Siltech®C-608 is a 100% active non-foaming water-soluble silicone glycol copolymer. It provides slip and mar resistance to water-borne based paints, inks and coatings. Siltech® C-608 is used as a non-foaming additive for water-borne systems. The primary function is to improve flow, leveling and release. It is recommended that Siltech® C-608 be used between 0.05-0.5% weight percent based on the total formulation. It can be added at any stage during the process. Vea Menos | |
| Siltech® C-816 | Siltech Corp. | Siltech® C-816 is a water-soluble alkyl functional silicone polyether. Its primary function is to provide soil resistance to water borne coatings. Siltech® C-816 is used as an additive in water-borne inks, paints and other coatings. It provides soil repel...Vea Mas Siltech® C-816 is a water-soluble alkyl functional silicone polyether. Its primary function is to provide soil resistance to water borne coatings. Siltech® C-816 is used as an additive in water-borne inks, paints and other coatings. It provides soil repellence to such coatings, as well as mar resistance and improved slip. Vea Menos | |
| SST®-2 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST-2 es un polvo PTFE micronizado que es insoluble, resistente al calor, fácil de incorporar y altamente eficiente. SST-2 brinda excelente deslizamiento. SST-2 es adecuado para usar con las ceras de polietileno de la serie Shamrock's S, brindando desliza...Vea Mas SST-2 es un polvo PTFE micronizado que es insoluble, resistente al calor, fácil de incorporar y altamente eficiente. SST-2 brinda excelente deslizamiento. SST-2 es adecuado para usar con las ceras de polietileno de la serie Shamrock's S, brindando deslizamiento y abrasión mejorados. Vea Menos | |
| SST®-3 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-3 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 5.0 µm. SST®-3 is recommended for use in offset and liquid inks. | |
| SST®-3D (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | Shamrock SST-3D es un polvo PTFE micronizado que brinda excelente resistencia al deslizamiento y roce/abrasión en tintas y revestimientos. | |
| SST®-4 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-4 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 3.0 µm. SST®-4 is recommended for use in offset and liquid inks. | |
| SST®-5 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-5 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 3.0 µm. SST®-5 is recommened for use in offset inks. | |
| TexMATTE 6005 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMatte 6005 es un producto de metacrilato de polimetilo reticulado. Puede dispersarse fácilmente en mezclas de alta velocidad en solventes, revestimientos a base de agua y UV. Este producto es resistente a los solventes y es estable y compatible en todo...Vea Mas TexMatte 6005 es un producto de metacrilato de polimetilo reticulado. Puede dispersarse fácilmente en mezclas de alta velocidad en solventes, revestimientos a base de agua y UV. Este producto es resistente a los solventes y es estable y compatible en todos los tipos de revestimientos líquidos. TexMatte 6005 es ideal para secado al aire y forzado y para sistemas de secado al horno. Este producto tiene un tamaño de partícula promedio de 5 - 8 μm. Vea Menos | |
| TexMATTE 6010 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMatte 6010 es un producto de metacrilato de polimetilo reticulado. Puede dispersarse fácilmente en mezclas de alta velocidad en solventes, revestimientos a base de agua y UV. Este producto es resistente a los solventes y es estable y compatible en todo...Vea Mas TexMatte 6010 es un producto de metacrilato de polimetilo reticulado. Puede dispersarse fácilmente en mezclas de alta velocidad en solventes, revestimientos a base de agua y UV. Este producto es resistente a los solventes y es estable y compatible en todos los tipos de revestimientos líquidos. TexMatte 6010 es ideal para secado al aire y forzado y para sistemas de secado al horno. Este producto tiene un tamaño de partícula promedio de 8 - 11 μm. Vea Menos | |
| TexMATTE 6014 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMatte 6014 es un producto de metacrilato de polimetilo reticulado. Puede dispersarse fácilmente en mezclas de alta velocidad en solventes, revestimientos a base de agua y UV. Este producto es resistente a los solventes y es estable y compatible en todo...Vea Mas TexMatte 6014 es un producto de metacrilato de polimetilo reticulado. Puede dispersarse fácilmente en mezclas de alta velocidad en solventes, revestimientos a base de agua y UV. Este producto es resistente a los solventes y es estable y compatible en todos los tipos de revestimientos líquidos. TexMatte 6014 es ideal para secado al aire y forzado y para sistemas de secado al horno. Este producto tiene un tamaño de partícula promedio de 11 - 15 μm. Vea Menos | |
| TexMATTE 6017 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMATTE 6017 is a cross-linked polymethyl methacrylate powder with a mean particle size of 19 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6030 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMATTE 6030 is a cross-linked polymethyl methacrylate powder with a mean particle size of 35 microns. The TexMATTE Series are used in both liquid and offset inks. |
