| ALuna-100 | Guangzhou GBS High-Tech & Industry Co., Ltd. | ALuna-100 is a fine, fumed alumina metal oxide with a high specific surface area. This product has high purity, low bulk density, a superfine particle size, good dispersibility, and a positive surface charge. It can be used in powder coatings, in order to...Vea Mas ALuna-100 is a fine, fumed alumina metal oxide with a high specific surface area. This product has high purity, low bulk density, a superfine particle size, good dispersibility, and a positive surface charge. It can be used in powder coatings, in order to improve chargeability and flowing. It can also be used in photo paper in order to provide high gloss and excellent printing. Vea Menos | |
| ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF-D is a multifunctional additive for solvent borne and water-based coating systems, free of ketoxime and aromates, and biodegradable. It can be use in almost all common paint systems, both water based and solvent based as well. This product has...Vea Mas ANTIGEL® KF-D is a multifunctional additive for solvent borne and water-based coating systems, free of ketoxime and aromates, and biodegradable. It can be use in almost all common paint systems, both water based and solvent based as well. This product has the following properties: stabilisation of viscosity against air oxidation, prevention of skinning, improved wetting, prevention of settlement, reduction of dispersing time, reworking of thickened batches, removal of floatation phenomena, and promotion of flow and gloss. The stabilisation is based on the oxygen binding properties of the antioxidant. The wetting component of ANTIGEL® KF-D reduces the interfacial tension between the usually hydrophilic pigments and the hydrophobic binder. The pigments are well distributed resulting an optimum depth of colour. Dispersion time, floatation phenomena and sedimentation are reduced and gloss is increased. Sedimentation is largely avoided. Because of the excellent wetting, optimum depth of colour is achieved. Vea Menos | |
| APL-308 | Tianyi Chemical Engineering Material Co., Ltd. | APL-308, in the form of a dry, white powder, is a zinc stearate additive that can be used in paints, sealer varnishes, and wood varnishes. This product is insoluble in water, ether and ethanol. It is soluble in benzene and acid. | |
| APL-309 | Tianyi Chemical Engineering Material Co., Ltd. | APL-309, in the form of a dry, white powder, is a zinc stearate additive that can be used in paints, sealer varnishes, and wood varnishes. This product is insoluble in water, ether and ethanol. It is soluble in benzene and acid. | |
| BYK®-300 | BYK | Aditivo de superficie de silicón con reducción mediana de tensión de superficie. Solución de un polidimetilsiloxano polieter-modificado. | |
| BYK®-354 | BYK | Aditivo acrílico de nivelación con propiedades de liberación de aire. Solución de un poliacrilato. | |
| BYK®-355 | BYK | Aditivo acrílico de nivelación para sistemas transmitidos por solvente y sin solvente. Solución de un poliacrilato. | |
| BYK®-356 | BYK | Aditivo acrílico de nivelacion para sistemas transmitidos por solvente y sin solvente. Poliacrilato. | |
| BYK®-358 N | BYK | Aditivo acrílico de nivelacion para sistemas transmitidos por solvente y sin solvente. Solución de un poliacrilato. | |
| BYK®-359 | BYK | Aditivo acrílico de nivelacion para sistemas transmitidos por solvente y sin solvente. Poliacrilato. | |
| BYK®-361 N | BYK | Aditivo acrílico de nivelación para sistemas transmitidos por solvente y sin solvente. Poliacrilato. | |
| BYK®-381 | BYK | Aditivo de nivelación para sistemas acuosos. Solución de un poliacrilato iónico. | |
| CoatOSil* FLX Coating Modifier | Momentive | CoatOSil* FLX es un modificador de resina polisilosano para los revestimientos que contienen silano/polisilosano, incluso los híbridos. Mejora la flexibilidad de los revestimientos, la retención de brillo en condiciones climáticas adversas y el rendimient...Vea Mas CoatOSil* FLX es un modificador de resina polisilosano para los revestimientos que contienen silano/polisilosano, incluso los híbridos. Mejora la flexibilidad de los revestimientos, la retención de brillo en condiciones climáticas adversas y el rendimiento ante la corrosión en las pruebas de atomización neutra. Este producto es compatible con muchos sistemas de resina orgánicos y pigmentos. Vea Menos | |
| Dextrol™ OC-180 | Ashland | Dextrol™ OC-180 es la forma neutralizada (sal de potasio) de un éster de fosfato de alcohol alifático etoxilado. Está diseñado para impartir la mejora de aceptación de brillo y color en pinturas de látex a base de agua. | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 es la forma de ácido libre de un éster de fosfato de de alcohol tridecílico etoxilado. Es un emulsionante eficaz en la polimerización de emulsiones y proporciona el látex final con bajo coágulo y mejora de la manipulación y estabilidad en a...Vea Mas Dextrol™ OC-60 es la forma de ácido libre de un éster de fosfato de de alcohol tridecílico etoxilado. Es un emulsionante eficaz en la polimerización de emulsiones y proporciona el látex final con bajo coágulo y mejora de la manipulación y estabilidad en almacenamiento. Vea Menos | |
| Dextrol™ OC-6025 | Ashland | Dextrol™ OC-6025 es un promotor de la aceptación de color y de brillo neutralizado con sal de hidróxido de amonio, sin APE, emulsionante para polimerización de emulsiones con una reducción de la sensibilidad al agua en las películas secas y dispersante au...Vea Mas Dextrol™ OC-6025 es un promotor de la aceptación de color y de brillo neutralizado con sal de hidróxido de amonio, sin APE, emulsionante para polimerización de emulsiones con una reducción de la sensibilidad al agua en las películas secas y dispersante auxiliar con propiedades anticorrosivas. Vea Menos | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...Vea Mas Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. Vea Menos | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 es la forma de ácido libre de un éster de fosfato de alcohol tridecílico etoxilado. Es un emulsionante eficaz en la polimerización de emulsiones y proporciona el látex final con bajo coágulo y mejora de la manipulación y estabilidad en alma...Vea Mas Dextrol™ OC-70 es la forma de ácido libre de un éster de fosfato de alcohol tridecílico etoxilado. Es un emulsionante eficaz en la polimerización de emulsiones y proporciona el látex final con bajo coágulo y mejora de la manipulación y estabilidad en almacenamiento. Vea Menos | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...Vea Mas Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. Vea Menos | |
| Dextrol™ OC-7525 | Ashland | Dextrol™ OC-7525 es un promotor de la aceptación de color y de brillo neutralizado con sal de hidróxido de amonio, sin APE, emulsionante para polimerización de emulsiones con una reducción de la sensibilidad al agua en las películas secas y dispersante au...Vea Mas Dextrol™ OC-7525 es un promotor de la aceptación de color y de brillo neutralizado con sal de hidróxido de amonio, sin APE, emulsionante para polimerización de emulsiones con una reducción de la sensibilidad al agua en las películas secas y dispersante auxiliar con propiedades anticorrosivas. Vea Menos | |
| DISPERBYK®-174 | BYK | Aditivo humectante y de dispersión, de peso molecular alto, para sistemas transmitidos por solvente y concentrados de pigmento. Soluciones de copolímeros de bloque, de peso molecular alto, con grupos afines al pigmento. | |
| DISPERBYK®-180 | BYK | Aditivo humectante y de dispersión, de peso molecular alto, para sistemas transmitidos por solvente y los transmitidos por agua. Sal de alquilolamonio de un copolímero con grupos ácidos. | |
| DISPERBYK®-182 | BYK | Aditivo humectante y de dispersión, de peso molecular alto, para sistemas transmitidos por solvente y los transmitidos por agua. Soluciones de copolímeros de bloque, de peso molecular alto, con grupos afines al pigmento. | |
| DISPERBYK®-185 | BYK | Aditivo humectante y de dispersión, de peso molecular alto, para los concentrados de pigmento transmitidos por solvente y los sin solvente. Soluciones de copolímeros de bloque, de peso molecular alto, con grupos afines al pigmento. | |
| DOWSIL™ 52 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 52 Additive is an ultra-high molecular weight silicone dispersion in water, supplied at 65% solids. It reduces static and dynamic coefficient of friction and improves mar resistance in coatings and inks applications. | |
| FluoroSLIP® 731MG (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | Una mezcla del polvo fino micronizados, de punto de fusión de alta aleación de cera en polvo y politetrafluoetileno. Proporciona la lubricidad creciente, dureza, las características antibloqueo y resistencia a la abrasión y del desgaste. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies b.v.b.a. | Hydrocer DP-69 is paraffin wax in an aqueous microdispersion recommended for water based coating systems. | |
| Hydrocer EE 95 (Synthetic Wax Emulsion) | Shamrock Technologies b.v.b.a. | Una emulsión del polietileno aniónico, de alta densidad. Proporciona una mayor resistencia a la abrasión y el deslizamiento. También mejora la resistencia al rayado y offset y los resultados de deslices angulares. Ideal para aplicaciones en las que se re...Vea Mas Una emulsión del polietileno aniónico, de alta densidad. Proporciona una mayor resistencia a la abrasión y el deslizamiento. También mejora la resistencia al rayado y offset y los resultados de deslices angulares. Ideal para aplicaciones en las que se requiere un rápido desarrollo de resistencia al agua. Vea Menos | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies b.v.b.a. | Una emulsión de parafina en agua. Proporciona excelente resistencia al agua cuando se usa en tintas y recubrimientos a base de agua. Se produce mediante un único proceso de emulsificación y está libre de agentes tensioactivos hidrófilos. | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies b.v.b.a. | Una emulsión polipropileno no-iónico. Se recomienda como un aditivo anti-deslizamiento para tintas a base de agua y recubrimientos. Aumenta el ángulo de deslizamiento sin reducir el brillo. | |
| Induprint SE 284 | Indulor Chemie GmbH | Induprint SE 284 is a zinc crosslinked soft emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has very good heat seal resistance, high gloss, excellent flexibility, and is free of glycols or glycol ethers. ...Vea Mas Induprint SE 284 is a zinc crosslinked soft emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has very good heat seal resistance, high gloss, excellent flexibility, and is free of glycols or glycol ethers. Induprint SE 284 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. Vea Menos | |
| Induprint SE 2872 | Indulor Chemie GmbH | Induprint SE 2872 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has good water resistance, high gloss, and excellent transfer properties. Induprint SE 2872 is used in water-based overprint varnish...Vea Mas Induprint SE 2872 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has good water resistance, high gloss, and excellent transfer properties. Induprint SE 2872 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. Vea Menos | |
| Induprint SE 290 | Indulor Chemie GmbH | Induprint SE 290 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has very high alkali resistance, excellent water resistance, high gloss, and excellent pigment wetting properties. Induprint SE 290 i...Vea Mas Induprint SE 290 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has very high alkali resistance, excellent water resistance, high gloss, and excellent pigment wetting properties. Induprint SE 290 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks Vea Menos | |
| Induprint SE 295 | Indulor Chemie GmbH | Induprint SE 295 is a soft emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent gloss, very high flexibility, and very good adhesion on films. Induprint SE 295 is used in water-based overprint va...Vea Mas Induprint SE 295 is a soft emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent gloss, very high flexibility, and very good adhesion on films. Induprint SE 295 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. Vea Menos | |
| Induprint SE 371 | Indulor Chemie GmbH | Induprint SE 371 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has high heat resistance, excellent gloss, is fast drying, and free of glycols or glycol ethers. Induprint SE 371 is used in water-ba...Vea Mas Induprint SE 371 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has high heat resistance, excellent gloss, is fast drying, and free of glycols or glycol ethers. Induprint SE 371 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. Vea Menos | |
| Induprint SE 375 | Indulor Chemie GmbH | Induprint SE 375 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent gloss, low VOC, and is free of glycols or glycol ethers. Induprint SE 375 is used in water-based overprint varnishes an...Vea Mas Induprint SE 375 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent gloss, low VOC, and is free of glycols or glycol ethers. Induprint SE 375 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. Vea Menos | |
| Induprint SE 87 | Indulor Chemie GmbH | Induprint SE 87 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent transparency, very good block resistance, high heat resistance, excellent gloss, and is free of glycols or glycol ethers...Vea Mas Induprint SE 87 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent transparency, very good block resistance, high heat resistance, excellent gloss, and is free of glycols or glycol ethers. Induprint SE 87 is used in water-based overprint varnishes, endless press/calendering varnishes, and water-based flexographic and gravure-printing inks. Vea Menos | |
| Minspar™ 7 | LEHVOSS Group | Minspar™ 7 is a fine particle size, ground feldspar with a tightly controlled particle size distribution. It is easily dispersed to a high Hegman grind to produce coatings with high gloss and sheen. The easily dispersed to a high Hegman grind to produce c...Vea Mas Minspar™ 7 is a fine particle size, ground feldspar with a tightly controlled particle size distribution. It is easily dispersed to a high Hegman grind to produce coatings with high gloss and sheen. The easily dispersed to a high Hegman grind to produce coatings with high gloss and sheen. The combination of low 325 mesh residue, particle size, and exterior durability make this product an excellent mineral additive for interior and exterior non-flat coatings, adhesives, sealants, and caulk compounds. Vea Menos | |
| Octa-Soligen® Calcium 5, neutral | OMG Borchers GmbH | Octa-Soligen® Calcium 5, Neutral es un secador auxiliar que se utiliza solo en combinación con secadores primarios y secundarios. Cuando se añade durante la molienda, mejora la dispersión y la humectación de los pigmentos. Este producto ayuda a incrementa...Vea Mas Octa-Soligen® Calcium 5, Neutral es un secador auxiliar que se utiliza solo en combinación con secadores primarios y secundarios. Cuando se añade durante la molienda, mejora la dispersión y la humectación de los pigmentos. Este producto ayuda a incrementar la dureza y el brillo de las películas de pintura y es adecuado para usar en sistemas a base de solventes. Vea Menos | |
| Purox® B Flakes Benzoic Acid | LANXESS (former Emerald Performance Materials) | Benzoic acid is a key raw material in the production of alkyd resins to control viscosity and enhance desirable characteristics in the final alkyd coating film, including gloss, adhesion, hardness, and chemical resistance, particularly resistance to alk...Vea Mas Benzoic acid is a key raw material in the production of alkyd resins to control viscosity and enhance desirable characteristics in the final alkyd coating film, including gloss, adhesion, hardness, and chemical resistance, particularly resistance to alkaline substances. It is also used as an additive for effective corrosion inhibition. The high quality of Purox B Flakes offers improved chemical characteristics, low odor and color, and high efficiency. It is easy to use and incorporate, with low agglomeration tendency. It dissolves very well in solvents such as xylene. Emerald Kalama Chemical was acquired by LANXESS in 2021. Vea Menos | |
| Raybo 57 OptiSperse HS | Raybo Chemical | Raybo 57 OptiSperse HS is a broad-spectrum dispersing agent in an amber liquid form. This product is most commonly used as an additive to improve dispersion and gloss in solvent-based and water-reducible coating applications. | |
| Raybo 5790 OptiSperse | Raybo Chemical | Raybo 5790 OptiSperse is a broad-spectrum dispersing agent in an amber liquid form with a total solids content of 90%. This product is most commonly used as an additive to improve dispersion and gloss in solvent-based and water-reducible coating applicati...Vea Mas Raybo 5790 OptiSperse is a broad-spectrum dispersing agent in an amber liquid form with a total solids content of 90%. This product is most commonly used as an additive to improve dispersion and gloss in solvent-based and water-reducible coating applications. Vea Menos | |
| S-232-N1 (Carnauba / Synthetic Wax Alloy) | Shamrock Technologies b.v.b.a. | S-232-N1 is a carnauba and synthetic wax alloy showing melting peaks ranging from 84 – 110°C. S-232-N1 is recommeneded for all clear OPV, water-based, solvent-based, and UV coatings. | |
| SCHWEGO® Flow 8057 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Flow 8057 is a biodegradable levelling additive for water-based coating systems. It can be used in virtually all water thinnable coating systems. Flow disturbances, such as orange peel or streaks are undesirable film defects, which frequently als...Vea Mas SCHWEGO® Flow 8057 is a biodegradable levelling additive for water-based coating systems. It can be used in virtually all water thinnable coating systems. Flow disturbances, such as orange peel or streaks are undesirable film defects, which frequently also impair the gloss. SCHWEGO® flow 8057 eliminates such defects in water-based systems. In many cases the gloss and the scratch resistance are also increased. Vea Menos | |
| SCHWEGO® Flow 8058 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Flow 8058 is a levelling additive for water-based coating systems that is VOC-free. It can be used in virtually all water thinnable coating systems. SCHWEGO® flow 8058 contains water as the only volatile component, which makes it especially suita...Vea Mas SCHWEGO® Flow 8058 is a levelling additive for water-based coating systems that is VOC-free. It can be used in virtually all water thinnable coating systems. SCHWEGO® flow 8058 contains water as the only volatile component, which makes it especially suitable for solvent free water thinnable systems. Flow disturbances, like orange peel or ropiness are undesirable film characteristics, which frequently also impair the gloss. SCHWEGO® flow 8058 eliminates these surface defects in water-based systems. In many cases the gloss and the scratch resistance are also increased. Vea Menos | |
| SCHWEGO® Wett 6246 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 6246 is a wetting and dispersing additive for solvent borne coating systems. It is a universal wetting and dispersing agent for solvent based and resin free systems. This product is suitable for the dispersion of organic and inorganic pigmen...Vea Mas SCHWEGO® Wett 6246 is a wetting and dispersing additive for solvent borne coating systems. It is a universal wetting and dispersing agent for solvent based and resin free systems. This product is suitable for the dispersion of organic and inorganic pigments as well as pigment concentrates. SCHWEGO® wett 6246 is especially suitable for enamels and industrial-,wood-, furniture coatings and pigment preparations. The application in pigment preparations is recommended. Vea Menos | |
| SCHWEGO® Wett 6247 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 6247 is a universal wetting and dispersing agent for solvent based and resin free systems. This product is suitable for the dispersion of organic and inorganic pigments as well as pigment concentrates. SCHWEGO® wett 6247 is especially suitab...Vea Mas SCHWEGO® Wett 6247 is a universal wetting and dispersing agent for solvent based and resin free systems. This product is suitable for the dispersion of organic and inorganic pigments as well as pigment concentrates. SCHWEGO® wett 6247 is especially suitable for enamels and industrial-, wood-, furniture coatings and pigment preparations. The application in pigment preparations is recommended. Vea Menos | |
| SCHWEGO® Wett 8075 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 8075 is a wetting and dispersing additive for water-based and solvent borne coating systems. It is suitable for most kinds of binder systems, and it is suitable for the dispersion of inorganic but also for organic pigments, such as phthalocy...Vea Mas SCHWEGO® Wett 8075 is a wetting and dispersing additive for water-based and solvent borne coating systems. It is suitable for most kinds of binder systems, and it is suitable for the dispersion of inorganic but also for organic pigments, such as phthalocyanines. This product has the following typical properties for optimal pigmentation: dispersion time is reduced, depth of colour is intensified. reduction of settlement, gloss increase, reduction of floatation phenomena and improvement of levelling. Vea Menos | |
| SCHWEGO® Wett 8076 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 8076 is a wetting and dispersing additive for solvent borne coating systems. It is added to solvent borne coating systems to disperse inorganic pigments. SCHWEGO® wett 8076 is suitable to disperse organic pigments, such as phthalocyanines. T...Vea Mas SCHWEGO® Wett 8076 is a wetting and dispersing additive for solvent borne coating systems. It is added to solvent borne coating systems to disperse inorganic pigments. SCHWEGO® wett 8076 is suitable to disperse organic pigments, such as phthalocyanines. This product is a clear to colourless liquid. Vea Menos | |
| SCHWEGO® Wett 8079 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 8079 is a wetting and dispersing additive for water-based coating systems. It is used to disperse inorganic and organic pigments in all kinds of high quality water-based coating systems. It is suitable for universal pastes. This product is a...Vea Mas SCHWEGO® Wett 8079 is a wetting and dispersing additive for water-based coating systems. It is used to disperse inorganic and organic pigments in all kinds of high quality water-based coating systems. It is suitable for universal pastes. This product is a polymeric dispersing additive that shows a high affinity to pigment surfaces. It improves: gloss, tinting strength, deflocculation stability, and prevents floating and flooding. Vea Menos | |
| Siltech® C-42 | Siltech Corp. | Siltech® C-42 is 100% active silicone polyether copolymer that is specifically designed to improve slip, leveling, mar resistance and gloss in water-borne, solvent-borne and UV coatings systems. It improves mar resistance and aids in dispersing pigments. ...Vea Mas Siltech® C-42 is 100% active silicone polyether copolymer that is specifically designed to improve slip, leveling, mar resistance and gloss in water-borne, solvent-borne and UV coatings systems. It improves mar resistance and aids in dispersing pigments. It is also compatible in solvent-borne coating system, and with most of the resins used in the coatings industry including acrylic, alkyd, polyurethane, polyester and epoxy resins. This product is 100% active and is soluble in aliphatic and aromatic solvents. Vea Menos | |
| Soluryl 20 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 20 is a low molecular weight styrene-acryl resin for water-based products. It is a gloss improving additives in water based overprint varnishes to produce a high gloss finish product. | |
| Soluryl 70 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 70 is a grinding vehicle and polymer surfactant for water-based products and is compatible with most common emulsions. It provides good pigment dispersion, excellent ink transfer and printability, and good viscosity stability and high gloss. | |
| Soluryl RP-590 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RP-590 is a modified acryl-styrene copolymer for use in pre-print application. It provides heat resistance, anti-blocking properties, rub resistance, and high gloss. | |
| Soluryl RV-4916 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RV-4916 is a modified styrene-acryl copolymer for water-based products and is compatible with a wide range of other acrylics. It is recommended for overprint vanish for endless press coating and paper coating and Let down vehicle for excellent glo...Vea Mas Soluryl RV-4916 is a modified styrene-acryl copolymer for water-based products and is compatible with a wide range of other acrylics. It is recommended for overprint vanish for endless press coating and paper coating and Let down vehicle for excellent gloss and water resistance. Vea Menos | |
| Soluryl RX-20 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RX-20 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as overprint varnishes for rub resistance and anti-slip coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let dow...Vea Mas Soluryl RX-20 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as overprint varnishes for rub resistance and anti-slip coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let down vehicle for good adhesion for Al foil. Vea Menos | |
| Soluryl RX-30 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RX-30 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as an overprint varnishes for rub resistance and hard film forming coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as...Vea Mas Soluryl RX-30 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as an overprint varnishes for rub resistance and hard film forming coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let down vehicle for good adhesion for Al foil. Vea Menos | |
| Soluryl S-820 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-820 is a grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It provides good pigment dispersion, high gloss and transparent, and excellent ink transfer and printability. | |
| Soluryl S-840 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-840 is a Styrene Acrylic resin for the neutral pH water-based products and is compatible with most common emulsions. It provides high gloss, good pigment dispersion, and good polymer surfactant for emulsion polymerization. | |
| Strodex™ PK-90 | Ashland | Strodex™ PK-90 es la forma neutralizada (sal de potasio) de un coéster de fosfato de alcoholes alifáticos. Imparte la mejora de aceptación de brillo y color en pinturas de látex a base de agua. | |
| WorléeAdd 2030 | Worlée-Chemie G.m.b.H. | W'Add 2030 es una solución al 28% de un ácido aromático disulfónico en isobutanol / acetato de metoxi propilo (MPA). Es un líquido claro, amarillo que se utiliza como un catalizador para promover la curación de disolvente y agua acabados a base de secado ...Vea Mas W'Add 2030 es una solución al 28% de un ácido aromático disulfónico en isobutanol / acetato de metoxi propilo (MPA). Es un líquido claro, amarillo que se utiliza como un catalizador para promover la curación de disolvente y agua acabados a base de secado al fuego. Vea Menos | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | Un aditivo para la pintura, lacas y acabado de cuero a base de silicona. Mejora la resistencia al rayado y al deslizamiento, así como la reducción de la cáscara de naranja. | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | Un aditivo para la pintura, lacas y acabado de cuero a base de silicona. Mejora la resistencia al rayado y al deslizamiento, así como la reducción de la cáscara de naranja. | |
| WorléeAdd 330 | Worlée-Chemie G.m.b.H. | Un aditivo para pinturas a base de silicona principalmente para sistemas diluibles en agua para eliminar imperfecciones de la superficie y para mejorar las propiedades humectantes. | |
| WorléeAdd 356 | Worlée-Chemie G.m.b.H. | Una solución de silicona modificado utilizado para mejorar las características de las pinturas a base de disolventes y tintas de impresión. | |
| WorléeAdd 700 | Worlée-Chemie G.m.b.H. | Una emulsión acuosa de silicona para uso en tintas de impresión, recubrimientos industriales, barnices y parquet. |
