| Aspartic Ester Resin Sunaspar SN524 | Yantai Suny Chem International Co., Ltd. | Sunaspar SN524 es una resina de éster aspártico sin solventes amina funcional utilizada como componente reactivo para poliisocianatos. Tiene un alto contenido de sólidos, baja viscosidad y alta reactividad. Este producto ofrece excelente dureza, nivelació...Vea Mas Sunaspar SN524 es una resina de éster aspártico sin solventes amina funcional utilizada como componente reactivo para poliisocianatos. Tiene un alto contenido de sólidos, baja viscosidad y alta reactividad. Este producto ofrece excelente dureza, nivelación y brillo. Se utiliza ampliamente en pinturas industriales de alto grado, como pinturas de automóviles, y pinturas de madera de alto grado así como en revestimientos anticorrosivos y revestimientos de burbuja. Vea Menos | |
| CYMEL® U-216-10LF | Allnex | La resina CYMEL® U-216-10LF es una resina de urea n-butilada que tiene una excelente compatibilidad con resinas hidrófobas. Es la versión de CYMEL® 216-8 sin solventes con el beneficio adicional de menor formaldehido libre. Está diseñada para revestimient...Vea Mas La resina CYMEL® U-216-10LF es una resina de urea n-butilada que tiene una excelente compatibilidad con resinas hidrófobas. Es la versión de CYMEL® 216-8 sin solventes con el beneficio adicional de menor formaldehido libre. Está diseñada para revestimientos decorativos metálicos, revestimientos de latas e imprimadores de revestimiento de bobinas. Este producto también puede agregarse como agente de nivelación en sistemas de resinas epoxi de aminas catalizadas de curado en frío. Vea Menos | Request Sample |
| CYMEL® U-216-8 | Allnex | La resina CYMEL® U-216-8 es un agente reticulante parcialmente n-butilado suministrado en una mezcla de n-butanol y xileno. Presenta una excelente compatibilidad con la mayoría de las resinas hidrófobas, como las resinas epoxi, y puede contribuir para mej...Vea Mas La resina CYMEL® U-216-8 es un agente reticulante parcialmente n-butilado suministrado en una mezcla de n-butanol y xileno. Presenta una excelente compatibilidad con la mayoría de las resinas hidrófobas, como las resinas epoxi, y puede contribuir para mejorar las características de nivelación y adhesión. Este producto se recomienda como un reticulante de revestimientos imprimadores, revestimientos de latas y acabados decorativos. Vea Menos | Request Sample |
| Deuteron OG 861 | Deuteron | Deuteron OG 861 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as a...Vea Mas Deuteron OG 861 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent based paint systems, Deuteron OG 861x improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives, Deuteron OG 861x does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 861x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Deuteron OG 861x is recommended for use in solvent based coatings which are applied in low film thickness, e.g. can-coatings. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. Vea Menos | Request Sample |
| Deuteron OG 8612 | Deuteron | Deuteron OG 8612 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as ...Vea Mas Deuteron OG 8612 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent based paint systems, Deuteron OG 861x improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives, Deuteron OG 861x does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 861x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Deuteron OG 861x is recommended for use in solvent based coatings which are applied in low film thickness, e.g. can-coatings. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. Vea Menos | Request Sample |
| Deuteron OG 8614 | Deuteron | Deuteron OG 8614 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as ...Vea Mas Deuteron OG 8614 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent based paint systems, Deuteron OG 861x improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives, Deuteron OG 861x does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 861x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Deuteron OG 861x is recommended for use in solvent based coatings which are applied in low film thickness, e.g. can-coatings. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. Vea Menos | Request Sample |
| Deuteron OG 863 | Deuteron | Deuteron OG 863 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as a...Vea Mas Deuteron OG 863 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 863x improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax based, Deuteron OG 863x does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 863x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Deuteron OG 863x is designed for the use in aqueous and solvent-based lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. Vea Menos | Request Sample |
| Deuteron OG 8632 | Deuteron | Deuteron OG 8632 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as ...Vea Mas Deuteron OG 8632 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 863x improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax based, Deuteron OG 863x does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 863x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Deuteron OG 863x is designed for the use in aqueous and solvent-based lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. Vea Menos | Request Sample |
| Deuteron OG 8634 | Deuteron | Deuteron OG 8634 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as ...Vea Mas Deuteron OG 8634 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 863x improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax based, Deuteron OG 863x does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 863x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Deuteron OG 863x is designed for the use in aqueous and solvent-based lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. Vea Menos | Request Sample |
| Deuteron OG 8670 | Deuteron | Deuteron OG 8670 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as ...Vea Mas Deuteron OG 8670 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 867x improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives Deuteron OG 867x does not spoil the recoatability. The small particle size also allows for its use in coating systems which are applied in low film thickness. Deuteron OG 867x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Deuteron OG 867x is designed for use in aqueous lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax-dispersions with their well-known typical side-effects. Vea Menos | Request Sample |
| Deuteron OG 8672 | Deuteron | Deuteron OG 8672 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as ...Vea Mas Deuteron OG 8672 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 867x improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives Deuteron OG 867x does not spoil the recoatability. The small particle size also allows for its use in coating systems which are applied in low film thickness. Deuteron OG 867x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Deuteron OG 867x is designed for use in aqueous lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax-dispersions with their well-known typical side-effects. Vea Menos | Request Sample |
| Deuteron OG 8674 | Deuteron | Deuteron OG 8674 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as ...Vea Mas Deuteron OG 8674 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 867x improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives Deuteron OG 867x does not spoil the recoatability. The small particle size also allows for its use in coating systems which are applied in low film thickness. Deuteron OG 867x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Deuteron OG 867x is designed for use in aqueous lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax-dispersions with their well-known typical side-effects. Vea Menos | Request Sample |
| Deuteron OG 8803 | Deuteron | Deuteron OG 8803 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal...Vea Mas Deuteron OG 8803 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal stability of over 200°C. When used as an additive in radically curing coatings systems, Deuteron OG 880x improves the static and dynamic friction of the coatings and provides improved mechanical resistance. Compared to wax-based additives, Deuteron OG 880x does not adversely affect the recoatability recoated. The very fine solid particles (PMU) allows the products to be used in coating systems that are applied as extremely thin films. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Therefore the reduction in gloss that can be achieved with Deuteron OG 880x can be customised to realise a variety of surface protection and matting objectives. Deuteron OG 880x is intended for use in radiation curing coatings and printing inks. They are particularly recommended for use in systems which require a thin film thickness, e.g. printing inks and overprinting lacquers. The use of Deuteron OG 880x can substantially improve coatings (ranging from silky sheen to matt) which contain silicic acid as a matting agent and possess inadequate surface resistance. Vea Menos | Request Sample |
| Deuteron OG 8805 | Deuteron | Deuteron OG 8805 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal...Vea Mas Deuteron OG 8805 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal stability of over 200°C. When used as an additive in radically curing coatings systems, Deuteron OG 880x improves the static and dynamic friction of the coatings and provides improved mechanical resistance. Compared to wax-based additives, Deuteron OG 880x does not adversely affect the recoatability recoated. The very fine solid particles (PMU) allows the products to be used in coating systems that are applied as extremely thin films. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Therefore the reduction in gloss that can be achieved with Deuteron OG 880x can be customised to realise a variety of surface protection and matting objectives. Deuteron OG 880x is intended for use in radiation curing coatings and printing inks. They are particularly recommended for use in systems which require a thin film thickness, e.g. printing inks and overprinting lacquers. The use of Deuteron OG 880x can substantially improve coatings (ranging from silky sheen to matt) which contain silicic acid as a matting agent and possess inadequate surface resistance. Vea Menos | Request Sample |
| Deuteron OG 8807 | Deuteron | Deuteron OG 8807 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal...Vea Mas Deuteron OG 8807 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal stability of over 200°C. When used as an additive in radically curing coatings systems, Deuteron OG 880x improves the static and dynamic friction of the coatings and provides improved mechanical resistance. Compared to wax-based additives, Deuteron OG 880x does not adversely affect the recoatability recoated. The very fine solid particles (PMU) allows the products to be used in coating systems that are applied as extremely thin films. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Therefore the reduction in gloss that can be achieved with Deuteron OG 880x can be customised to realise a variety of surface protection and matting objectives. Deuteron OG 880x is intended for use in radiation curing coatings and printing inks. They are particularly recommended for use in systems which require a thin film thickness, e.g. printing inks and overprinting lacquers. The use of Deuteron OG 880x can substantially improve coatings (ranging from silky sheen to matt) which contain silicic acid as a matting agent and possess inadequate surface resistance. Vea Menos | Request Sample |
| Dromel™ 104 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromel™104 is a Butylated Urea Formaldehyde Resin. | |
| PT 726 | BIP (Oldbury) Ltd | PT 726 is a modified polymer of ethylene urea. It is a non-ionic, clear to pale yellow, formaldehyde free liquid. Primarily used for crease resistant finishes on cellulose fiber fabrics when formaldehyde free product and requires no special catalyst. | |
| PT 727 | BIP (Oldbury) Ltd | PT 727 is a modified urea formaldehyde polymer. It is a clear, straw coloured cationic liquid. Primarily used for anchoring thermoplastic coatings to regenerated cellulose film. | |
| PT 729 | BIP (Oldbury) Ltd | PT 729 is an oligomer of dimethylol cyclic ethylene urea. It is a non-ionic reactant resin. Primarily used as a soft crease resistant and mechanical finishes for cellulosic fibres, woven and knitted goods, can also be used for white goods where chlorine r...Vea Mas PT 729 is an oligomer of dimethylol cyclic ethylene urea. It is a non-ionic reactant resin. Primarily used as a soft crease resistant and mechanical finishes for cellulosic fibres, woven and knitted goods, can also be used for white goods where chlorine retention is of no importance. Vea Menos | |
| PT 931 | BIP (Oldbury) Ltd | PT 931 is a dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde clear solution that is primarily used as a crease resistant and permanent press finish for fabrics containing cellulosic/synthetic fibre blends. Th...Vea Mas PT 931 is a dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde clear solution that is primarily used as a crease resistant and permanent press finish for fabrics containing cellulosic/synthetic fibre blends. This product gives improved chlorine resistance and very low residual formaldehyde. Vea Menos | |
| PT 933 | BIP (Oldbury) Ltd | PT 933 is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. Primarily used as a suitable for crease resistant finishing where necessary to achieve Oeko-Tex 100 Class 1 and...Vea Mas PT 933 is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. Primarily used as a suitable for crease resistant finishing where necessary to achieve Oeko-Tex 100 Class 1 and Japanese Law 112 for baby wear and good chlorine resistance. Vea Menos | |
| PT 939 C | BIP (Oldbury) Ltd | PT 939 C is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. It is very reactive and primarily used with BCP for excellent DP ratings on cellulose fabrics. | |
| UF-8 | Macro Polymers Pvt. Ltd. | UF-8 is a butylated urea formaldehyde resin that has not been plasticised. This product shows rapid curing, good colour and colour retention in stoving enamels. If it is used in nitrocellulose lacquers, it has good build and high gloss. It can be used ...Vea Mas UF-8 is a butylated urea formaldehyde resin that has not been plasticised. This product shows rapid curing, good colour and colour retention in stoving enamels. If it is used in nitrocellulose lacquers, it has good build and high gloss. It can be used in two-pack acid-cure coatings and nitrocellulose polishing lacquers. Vea Menos | |
| UF-8 LFF | Macro Polymers Pvt. Ltd. | UF-8 LFF is a butylated urea formaldehyde resin that has not been plasticised. If it is used in stoving enamels, it shows rapid curing, good colour and colour retention. If it is used in nitrocellulose lacquers, it shows good build, high gloss, and exce...Vea Mas UF-8 LFF is a butylated urea formaldehyde resin that has not been plasticised. If it is used in stoving enamels, it shows rapid curing, good colour and colour retention. If it is used in nitrocellulose lacquers, it shows good build, high gloss, and excellent stability. This product has low free formaldehyde and low odour. It can be used in two-pack acid cure coatings and nitrocellulose polishing lacquers. Vea Menos | |
| UF-8 (LFF) NP | Macro Polymers Pvt. Ltd. | UF-8 (LFF) NP is a butylated urea formaldehyde resin that has not been plasticised. If it is used in stoving enamels, it shows rapid curing, good colour and colour retention. If it is used in nitrocellulose lacquers, it shows good build, high gloss, and...Vea Mas UF-8 (LFF) NP is a butylated urea formaldehyde resin that has not been plasticised. If it is used in stoving enamels, it shows rapid curing, good colour and colour retention. If it is used in nitrocellulose lacquers, it shows good build, high gloss, and excellent stability. This product has low free formaldehyde and low odour. It can be used in two-pack acid cure coatings and nitrocellulose polishing lacquers. Vea Menos | |
| UF-8 NFF | Macro Polymers Pvt. Ltd. | UF-8 NFF is a butylated urea formaldehyde resin that has not been plasticised. If it is used in stoving enamels, it shows rapid curing, good colour and colour retention. If it is used in nitrocellulose lacquers, it shows good build, high gloss, and exce...Vea Mas UF-8 NFF is a butylated urea formaldehyde resin that has not been plasticised. If it is used in stoving enamels, it shows rapid curing, good colour and colour retention. If it is used in nitrocellulose lacquers, it shows good build, high gloss, and excellent stability. This product has no free formaldehyde and low odour. It can be used in two-pack acid cure coatings and nitrocellulose polishing lacquers. Vea Menos | |
| UF-9001 | Macro Polymers Pvt. Ltd. | UF-9001 is a butylated urea formaldehyde resin that has not been plasticised. If it is used in stoving enamels, it shows rapid curing, good colour and colour retention. If it is used in nitrocellulose lacquers, it shows good build, high gloss and excell...Vea Mas UF-9001 is a butylated urea formaldehyde resin that has not been plasticised. If it is used in stoving enamels, it shows rapid curing, good colour and colour retention. If it is used in nitrocellulose lacquers, it shows good build, high gloss and excellent stability. It can be used in second-quality stoving paints, with good adhesion to surfaces and good inter-surface adhesion. Vea Menos | |
| Urea - Formaldehyde Resins KF-FE | Achema | Urea - formaldehyde resins KF-FE is used for plywood production, mold pressing, thermal insulation material and wood particleboard production. | |
| Urea - Formaldehyde Resins KF-LE | Achema | Urea - formaldehyde resins KF-LE is used for plywood, furniture, curved plywood and wood particle production. | |
| Urea - Formaldehyde Resins KF-MEC | Achema | Urea - formaldehyde resins KF-MEC is used for wood particleboard production. | |
| Urea - Formaldehyde Resins KF-MEC07 | Achema | Urea - formaldehyde resins KF-MEC07 is used for wood particleboard. | |
| Urea - Formaldehyde Resins KF-MEC13 | Achema | Urea - formaldehyde resins KF-MEC13 is used for wood particleboard. | |
| Urea - Formaldehyde Resins KF-VIP | Achema | Urea - formaldehyde resins KF-VIP is used for wood particleboard. | |
| Urea Formaldehyde Resin 5260 | Jiangsu Sanmu Group Corporation | La resina de formaldehído de urea 5260 es una resina de urea que se utiliza en pinturas de horneada de bajo grado. | |
| Urea Formaldehyde Resin 5265 | Jiangsu Sanmu Group Corporation | La resina de formaldehído de urea 5265 es una resina de urea en revestimientos de protección de bobinas y pinturas de amino de horneado. | |
| Urea Formaldehyde Resin 5267 | Jiangsu Sanmu Group Corporation | La resina de formaldehído de urea 5267 es una resina de urea en pinturas de madera curadas con ácido y pinturas de horneado de bajo grado. | |
| Urea Formaldehyde Resin 5660 | Jiangsu Sanmu Group Corporation | La resina de formaldehído de urea 5660 es una resina de urea que se utiliza en barnices con brillo para papel. | |
| Urea Formaldehyde Resin 578-1 | Jiangsu Sanmu Group Corporation | La resina de formaldehído de urea 578-1 es una resina de urea que se utiliza en revestimientos de protección de bobinas pinturas de horneada de bajo grado. | |
| VIAMIN HP 366/60IBE | Allnex | VIAMIN HP 366/60IBE is an acid-curing, plasticized urea resin of mild odor. It has excellent through drying, extended processing time, and speedy handling. It has outstanding suitability for low-pollutant one and two-component paints for industrial furnit...Vea Mas VIAMIN HP 366/60IBE is an acid-curing, plasticized urea resin of mild odor. It has excellent through drying, extended processing time, and speedy handling. It has outstanding suitability for low-pollutant one and two-component paints for industrial furniture coating and for parquet floor sealing. Vea Menos | Request Sample |
