| 1,4-Cyclohexane dimethanol divinyl ether | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol divinyl ether is a reactive diluent for unsaturated oligomers, UV curable coatings and inks. | |
| 1,4-Cyclohexanedimethanol (CHDM) | Yantai Suny Chem International Co., Ltd. | El 1,4-ciclohexanodimetanol (CHDM) es miscible con agua y alcohol, soluble en cetona e insoluble en éter e hidrocarburo alifático. Es a la vez duro y flexible, con una temperatura de transición vítrea (Glass Transition Temperature, TG) alta, y ofrece exce...Vea Mas El 1,4-ciclohexanodimetanol (CHDM) es miscible con agua y alcohol, soluble en cetona e insoluble en éter e hidrocarburo alifático. Es a la vez duro y flexible, con una temperatura de transición vítrea (Glass Transition Temperature, TG) alta, y ofrece excelente estabilidad al calor, buena solubilidad y buena resistencia al clima. Este producto se utiliza principalmente en poliésteres, como fibras de poliéster y resinas de poliéster no saturado, como PETG, PCT, PCTG, PCTA, entre otros. Puede aumentar la reactividad en los compuestos de poliéster y mejorar la estabilidad hidrolítica, la plasticidad, el brillo, la transparencia, la imprimibilidad y la capacidad de procesamiento del polímero. El CHDM también puede utilizarse en aplicaciones de revestimiento en polvo, lo que podría aumentar la resistencia a las bajas temperaturas y la resistencia al clima de los revestimientos y mejorar el brillo de la superficie del revestimiento. Vea Menos | |
| ACMO | Rahn AG | ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the a...Vea Mas ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. ACMO can be applied to the following applications: screen inks and varnishes; plastic coatings; laminating adhesives; printed circuit boards; and industrial coatings. Vea Menos | Request Sample |
| Aminopropylmorpholine (APM) | Huntsman Performance Products | Aminopropylmorpholine (APM) is a clear, essentially colourless, low viscosity amine that is highly reactive with glycidyl ether type resins, and also finds use as reactive diluent in epoxy formulations. | |
| Atresal LO 23 | Atcoat GmbH | Atresal LO 23 is a reactive diluent, consisting of high quality fatty acid, which allows the formulation of paints with reduced VOC content in addition to improve the flow where. Atcoat alkyd resins are based on natural raw materials like fatty acids, pla...Vea Mas Atresal LO 23 is a reactive diluent, consisting of high quality fatty acid, which allows the formulation of paints with reduced VOC content in addition to improve the flow where. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 23 has an oil length of 95, a solid of 100% and a viscosity of 250 to 310 mPas. Vea Menos | |
| Atresal RV 300 | Atcoat GmbH | Atresal RV 300 is a reactive diluent, consisting of high quality fatty acid, which allows the formulation of paints with reduced VOC content in addition to improve the flow where possible and has good pigment compatibility. Atcoat alkyd resins are based o...Vea Mas Atresal RV 300 is a reactive diluent, consisting of high quality fatty acid, which allows the formulation of paints with reduced VOC content in addition to improve the flow where possible and has good pigment compatibility. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal RV 300 has an oil length of 95, a solid of 100% and a viscosity of 55 to 75 sec (DIN4). Vea Menos | |
| Atresal RV 305 | Atcoat GmbH | Atresal RV 305 is a reactive diluent, consisting of high quality fatty acid, which allows the formulation of paints with reduced VOC content in addition to improve the flow where possible and has good pigment compatibility. Atcoat alkyd resins are based o...Vea Mas Atresal RV 305 is a reactive diluent, consisting of high quality fatty acid, which allows the formulation of paints with reduced VOC content in addition to improve the flow where possible and has good pigment compatibility. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal RV 305 has an oil length of 96, a solid of 100% and a viscosity of 55 to 75 sec (DIN4). Vea Menos | |
| Bisomer® BDDMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® BDDMA (1,4 butanodiol dimetacrilato) es un monómero diacrilato de poco olor y baja viscosidad. No es tóxico, no es irritante y no es sensibilizante. No contiene frases de riesgo R y es ideal para sistemas sin etiquetas. Este producto tiene un con...Vea Mas Bisomer® BDDMA (1,4 butanodiol dimetacrilato) es un monómero diacrilato de poco olor y baja viscosidad. No es tóxico, no es irritante y no es sensibilizante. No contiene frases de riesgo R y es ideal para sistemas sin etiquetas. Este producto tiene un contenido inhibidor (MEHQ) de 300 a 500 ppm, un número de color de 100 Pt/Co máx., una cantidad total de monómeros polimerizables de 99,0% mín. y un peso molecular (AV) de 226g/mol. Bisomer® BDDMA es un excelente diluyente reactivo en revestimientos de madera de curado UV debido a su baja viscosidad. Es ideal en aplicaciones curadas con peróxido como coagente de PP, PE, nitrilo, cauchos de EPDM y PVC. Proporciona excelentes propiedades con PMMA, especialmente en suelos de acrílico y mármol sintético. Bisomer® BDDMA se utiliza en fotopolímeros, revestimientos de alambres y cables, adhesivos y selladores. Además, ofrece una excelente compatibilidad con poliésteres insaturados para revestimientos en gel, anclajes químicos y pernos de anclaje. Vea Menos | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® BZMA (bencil metacrilato) es un monómero monofuncional de baja viscosidad adecuado para una amplia gama de aplicaciones. Es hidrófobo y de baja viscosidad, y es particularmente adecuado como diluyente reactivo en adhesivos, selladores, tintas y r...Vea Mas Bisomer® BZMA (bencil metacrilato) es un monómero monofuncional de baja viscosidad adecuado para una amplia gama de aplicaciones. Es hidrófobo y de baja viscosidad, y es particularmente adecuado como diluyente reactivo en adhesivos, selladores, tintas y revestimientos. Este producto presenta un contenido de metoxihidroquinona de 50 ± 5 ppm, un índice de acidez de Puede utilizarse como comonómero en formulaciones acrílicas a base de PMMA para aumentar la resistencia al impacto, la hidrofobicidad y la integridad estructural de resinas, materiales compuestos y revestimientos. También es particularmente útil como reemplazo del estireno en resinas de poliéster y resinas de éster de vinilo insaturadas utilizadas en una amplia gama de aplicaciones, incluyendo anclajes químicos y compuestos. Debido a su alto índice de refracción, Bisomer® BzMA también es apto para cristales moldeados, fibras ópticas, laminados transparentes y otras aplicaciones donde la transparencia es un requisito clave. Vea Menos | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PPA 6 es una opción menos tradicional para la producción de oligómeros de acrilato de uretano curados con UV. Es un excelente diluyente reactivo de baja contracción para sistemas UV a base de acrilatos de uretano y ésteres de vinilo (acrilatos ep...Vea Mas Bisomer® PPA 6 es una opción menos tradicional para la producción de oligómeros de acrilato de uretano curados con UV. Es un excelente diluyente reactivo de baja contracción para sistemas UV a base de acrilatos de uretano y ésteres de vinilo (acrilatos epoxi). Este producto tiene un número de acidez de Bisomer® PPA6 presenta baja temperatura de transición vítrea (Tg) y ofrece excelentes propiedades plastificantes cuando se incorpora a polímeros, incluidos los polímeros de emulsión. Este producto es ideal en la preparación de oligómeros de UV, polímeros de emulsión, tintas de impresión y dispersiones de poliuretano (PUD). También se utiliza en polioles acrílicos tradicionales para revestimientos de superficies. Vea Menos | |
| Bisomer® TEGDMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® TEGDMA es un monómero de dimetacrilato de baja viscosidad que es ideal para utilizar como co-monómero para mejorar la dureza y las propiedades mecánicas de plásticos, poliolefinas, adhesivos y selladores. Se utiliza especialmente para mejorar las...Vea Mas Bisomer® TEGDMA es un monómero de dimetacrilato de baja viscosidad que es ideal para utilizar como co-monómero para mejorar la dureza y las propiedades mecánicas de plásticos, poliolefinas, adhesivos y selladores. Se utiliza especialmente para mejorar las propiedades mecánicas de poliésteres insaturados y polímeros acrílicos, como hojas de acrílico y pisos de acrílico. Este producto contiene un total de monómeros polimerizables de 99% como mín., un peso molecular (prom.) de 286 g/mol y un contenido inhibidor (MEHQ) de 250 a 400 ppm. Bisomer® TEGDMA es un excelente diluyente reactivo de formulaciones curadas con peróxido debido a su baja viscosidad y facilidad de manipulación. No es tóxico ni sensibilizante y tampoco es irritante. Es ideal para aplicaciones curadas con peróxido de dibenzoílo (BPO) y es excelente para usar en la producción de fotopolímeros curado por UV como placas de impresión flexográficas. Es ampliamente utilizado en fotopolímeros, revestimientos de alambres y cables, adhesivos y selladores. Bisomer® TEGDMA ofrece una excelente compatibilidad con poliésteres insaturados para anclajes químicos y pernos de anclaje. Vea Menos | |
| CHS-Epoxy RR 300 | Spolchemie | CHS-Epoxy RR 300 is a reactive diluent for epoxy resin systems. This product is made up of polypropylene glycol diglycidyl ether. CHS-Epoxy RR 300 is primarily used as a reactive diluent solvent with lower ability to dilute. It has low toxicity and can al...Vea Mas CHS-Epoxy RR 300 is a reactive diluent for epoxy resin systems. This product is made up of polypropylene glycol diglycidyl ether. CHS-Epoxy RR 300 is primarily used as a reactive diluent solvent with lower ability to dilute. It has low toxicity and can also act as a plasticizer. Vea Menos | |
| CoatOSil* T-Cure Silane Oligomer | Momentive | CoatOSil* T-Cure Silane Oligomer may be useful in the development of coating formulations, such as Polyaspartic and 2K Polyurethane systems, where reactivity with a mercapto silane is desirable. This patented oligomer is low in odor compared to standard m...Vea Mas CoatOSil* T-Cure Silane Oligomer may be useful in the development of coating formulations, such as Polyaspartic and 2K Polyurethane systems, where reactivity with a mercapto silane is desirable. This patented oligomer is low in odor compared to standard mercapto silanes and can display a trio of reactive chemistries. In addition to thiol groups, silanol and diols are generated upon the hydrolysis of the silane. It behaves as a reactive diluent within a coating formulation, and is recommended for industrial maintenance applications, automotive, appliance, and coil applications; epoxy primers for metals and flooring, and aurospace and automotive refinishing applications. Vea Menos | |
| Curalite™ Ox | Perstorp | Curalite™ Ox is a low viscosity, odor free, non-skin irritating, colorless liquid. Curalite™ Ox is one of the main components of UV/EB cationic formulations as a reactive diluent. It combines increased reactivity with good diluting power of epoxy resins a...Vea Mas Curalite™ Ox is a low viscosity, odor free, non-skin irritating, colorless liquid. Curalite™ Ox is one of the main components of UV/EB cationic formulations as a reactive diluent. It combines increased reactivity with good diluting power of epoxy resins and increases through cure and chemical resistance of the formulation. Curalite™ Ox is suitable for all types of cationic UV printing inks and overprint varnishes both for metal and plastic substrates. Vea Menos | |
| Curalite™ OxPlus | Perstorp | Curalite™ OxPlus is a clear colourless liquid. It is used as a reactive diluent for cationic radiation curing. | |
| CV-2567 | NuSil Silicone Technology 1 | CV-2567 is a pourable RTV siicone that can be used as a diluent for reducing the viscosity of other controlled volatility silicones. This product meets the ASTM 595 low outgas specifications outlined in NASA and the European Space Agency. It can be used a...Vea Mas CV-2567 is a pourable RTV siicone that can be used as a diluent for reducing the viscosity of other controlled volatility silicones. This product meets the ASTM 595 low outgas specifications outlined in NASA and the European Space Agency. It can be used as an adhesive or sealant for electronic and space applications. Vea Menos | |
| Desmodur® N 3400 | Covestro | Un poliisocianato alifático (uretdiona de HDI) utilizado como componente endurecedor para los sistemas de revestimientos de poliuretano resistentes a la luz. | |
| DESMOPHEN® 1300 PR 75 X | Covestro | Un poliéster resistente al hidroxilo utilizado como co-reactivo para poliisocianatos en la formulación de revestimientos de poliuretano de dos componentes de secado al aire. | |
| DESMOPHEN® 775 XP | Covestro | Un poliéster ramificado resistente al hidroxilo sin aroma utilizado como co-reactivo, generalmente con Desmodur N 75, N 3200 o N 100 en la formulación de revestimientos de dos componentes con estabilidad climática y muy resistentes a la luz. | |
| Diluent SM-60 | Jiangsu Sanmu Group Corporation | El diluyente SM-60 es un diluyente reactivo cuyo uso principal es la dilución de resinas epoxi de bajo peso molecular. | |
| Diluent SM-622 | Jiangsu Sanmu Group Corporation | El diluyente SM-622 es un diluyente reactivo cuyo uso principal se aplica en resinas epoxi de doble grupo funcional. | |
| Diluent SM-632 | Jiangsu Sanmu Group Corporation | El diluyente SM-632 es un diluyente reactivo cuyo uso principal es en resinas epoxi de doble grupo funcional. | |
| Diluent SM-632P | Jiangsu Sanmu Group Corporation | El diluyente SM-632P es un diluyente reactivo con un tipo de cloruros totales bajos y buena flexibilidad. Puede utilizarse en productos electrónicos, eléctricos y en pinturas electroforéticas. | |
| Diluent SM-633 | Jiangsu Sanmu Group Corporation | El diluyente SM-633 es un diluyente reactivo con un tipo de cloruros totales bajos y buena flexibilidad. Puede utilizarse en productos electrónicos, eléctricos y en pinturas electroforéticas. | |
| Diluent SM-660 | Jiangsu Sanmu Group Corporation | El diluyente SM-660 es un diluyente reactivo cuyo uso principal es la dilución de resinas epoxi de bajo peso molecular. | |
| Diluent SM-660A | Jiangsu Sanmu Group Corporation | El diluyente SM-660A es un diluyente reactivo cuyo uso principal es la dilución de resinas epoxi de bajo peso molecular. | |
| Diluent SM-661 | Jiangsu Sanmu Group Corporation | El diluyente SM-661 es un diluyente reactivo cuyo uso principal es la dilución de resinas epoxi de bajo peso molecular. | |
| Diluent SM-678 | Jiangsu Sanmu Group Corporation | El diluyente SM-678 es un diluyente reactivo que puede utilizarse en materiales para la corrosión, compuestos y revestimientos. | |
| Diluent SM-680 | Jiangsu Sanmu Group Corporation | El diluyente SM-680 es un diluyente reactivo que puede utilizarse en resinas sintéticas, pinturas, silicio orgánico y otros materiales intermedios. | |
| Diluent SM-681 | Jiangsu Sanmu Group Corporation | El diluyente SM-681 es un diluyente reactivo con resistencia química y a la intemperie. Puede utilizarse en pinturas y colorantes. | |
| Diluent SM-683 | Jiangsu Sanmu Group Corporation | El diluyente SM-681 es un diluyente reactivo con resistencia al calor que puede utilizarse en electrónica. | |
| Diluent SM-684 | Jiangsu Sanmu Group Corporation | El diluyente SM-684 es un diluyente reactivo con buena resistencia química. Puede utilizarse en pinturas y colorantes. | |
| Diluent SM-685 | Jiangsu Sanmu Group Corporation | El diluyente SM-685 es un diluyente reactivo con buena flexibilidad y puede utilizarse en electrónica. | |
| Diluent SM-686 | Jiangsu Sanmu Group Corporation | El diluyente SM-686 es un diluyente reactivo con resistencia al calor que se utiliza en revestimientos y adhesivos. | |
| Diluent SM-687 | Jiangsu Sanmu Group Corporation | El diluyente SM-687 es un diluyente reactivo con resistencia al calor que se utiliza en revestimientos y adhesivos. | |
| Diluent SM-688 | Jiangsu Sanmu Group Corporation | El diluyente SM-688 es un diluyente reactivo cuyo uso principal es la dilución de resinas epoxi de bajo peso molecular. | |
| Diluent SM-694 | Jiangsu Sanmu Group Corporation | El diluyente SM-694 es un diluyente reactivo cuyo uso principal es la dilución de resinas epoxi de bajo peso molecular. | |
| Diluent SM-80 | Jiangsu Sanmu Group Corporation | El diluyente SM-80 es un diluyente reactivo cuyo uso principal es en resinas epoxi de doble grupo funcional. | |
| Diluent SM-90 | Jiangsu Sanmu Group Corporation | El diluyente SM-90 es un diluyente reactivo cuyo uso principal es la dilución de resinas epoxi de bajo peso molecular. | |
| Diluent SM-90B | Jiangsu Sanmu Group Corporation | El diluyente SM-90B es un diluyente reactivo cuyo uso principal es la dilución de resinas epoxi de bajo peso molecular. | |
| DMAA | Rahn AG | DMAA is a reactive diluent for radically curable inks, coatings and adhesives. Its properties can be summarized as follows: low viscosity, very good optical clarity, water soluble and very good moisture vapor transition rate. It also offers very good oxyg...Vea Mas DMAA is a reactive diluent for radically curable inks, coatings and adhesives. Its properties can be summarized as follows: low viscosity, very good optical clarity, water soluble and very good moisture vapor transition rate. It also offers very good oxygen penetration and water holding capacity. DMAA and its homopolymers are water soluble. Vea Menos | Request Sample |
| DPGDA | Allnex | DPGDA (dipropilenglicol diacrilato) es un diluyente reactivo difuncional que polimeriza cuando se expone a fuentes de radicales libres. DPGDA es particularmente útil en revestimientos y tintas donde se requiere mejorar la flexibilidad y la adherencia en c...Vea Mas DPGDA (dipropilenglicol diacrilato) es un diluyente reactivo difuncional que polimeriza cuando se expone a fuentes de radicales libres. DPGDA es particularmente útil en revestimientos y tintas donde se requiere mejorar la flexibilidad y la adherencia en combinación con una buena resistencia a la humedad. Vea Menos | Request Sample |
| EBECRYL® 110 | Allnex | EBECRYL® 110 es un diluyente reactivo monofuncional que se caracteriza por una baja viscosidad y relativamente bajo olor. Se utiliza en revestimientos curados por rayos ultravioletas (UV) o haces de electrones (EB) para controlar la viscosidad y aumentar ...Vea Mas EBECRYL® 110 es un diluyente reactivo monofuncional que se caracteriza por una baja viscosidad y relativamente bajo olor. Se utiliza en revestimientos curados por rayos ultravioletas (UV) o haces de electrones (EB) para controlar la viscosidad y aumentar la flexibilidad. Las aplicaciones sugeridas para EBECRYL® 110 incluyen: revestimientos y tintas serigráficas en plásticos flexibles y semi rígidos, incluidos poliolefinas, revestimientos de fibra óptica y revestimientos de alto índice de refracción. Vea Menos | Request Sample |
| EBECRYL® 113 | Allnex | EBECRYL® 113 es un epoxi alifático acrilado monofuncional de bajo olor que puede ser utilizado como un diluyente reactivo en revestimientos de curado por luz ultravioleta (UV) o haces de electrones (EB). Es un buen diluyente para una variedad de oligómero...Vea Mas EBECRYL® 113 es un epoxi alifático acrilado monofuncional de bajo olor que puede ser utilizado como un diluyente reactivo en revestimientos de curado por luz ultravioleta (UV) o haces de electrones (EB). Es un buen diluyente para una variedad de oligómeros acrilados. En las formulaciones, puede disminuir la Tg, aumentar la flexibilidad y mejorar la adherencia en plásticos. Se recomienda como diluyente reactivo para: tintas de serigrafía y barnices, revestimientos de papel y plástico, revestimientos resistentes al agua, revestimientos flexibles, revestimientos y tintas con adherencia en plásticos como el polietileno y PVC plastificado, y capas de protección y selladores de madera. Vea Menos | Request Sample |
| EBECRYL® 130 | Allnex | EBECRYL® 130 es un diacrilato alifático cíclico útil como un diluyente reactivo en revestimientos y tintas curados por luz UV (ultravioleta) o EB (haces de electrones). Puede proporcionar una combinación de dureza y capacidad de recuperación junto con mej...Vea Mas EBECRYL® 130 es un diacrilato alifático cíclico útil como un diluyente reactivo en revestimientos y tintas curados por luz UV (ultravioleta) o EB (haces de electrones). Puede proporcionar una combinación de dureza y capacidad de recuperación junto con mejores propiedades de adherencia en diversos sustratos. Se recomienda para usar en: revestimientos resistentes al rayado y a la abrasión, revestimientos que requieren una mayor resistencia térmica y tintas de inyección. Vea Menos | Request Sample |
| EBECRYL® 140 | Allnex | EBECRYL® 140 es un diluyente reactivo que es compatible con una amplia gama de resinas de acrilato utilizadas en aplicaciones de curado por luz UV y EB. Los niveles eficaces de EBECRYL® 140 oscilan entre 10% y 30%, según la aplicación. En tintas litográfi...Vea Mas EBECRYL® 140 es un diluyente reactivo que es compatible con una amplia gama de resinas de acrilato utilizadas en aplicaciones de curado por luz UV y EB. Los niveles eficaces de EBECRYL® 140 oscilan entre 10% y 30%, según la aplicación. En tintas litográficas y barnices es muy eficaz para regular la viscosidad, manteniendo o mejorando la respuesta de curado y las propiedades físicas. Vea Menos | Request Sample |
| EBECRYL® 160 | Allnex | EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and tou...Vea Mas EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, EBECRYL® 160 exhibits the highest reactivity and the greatest viscosity reduction of oligomers. EBECRYL® 160 is a reactive diluent compatible with a wide range of acrylated resins used in UV/EB curing applications. Hardness, abrasion resistance, and high gloss properties make EBECRYL®160 popular for overprint varnishes, inks, coatings and electronic applications such as photoresists. Vea Menos | Request Sample |
| EBECRYL® 7100 | Allnex | EBECRYL® 7100 es una resina de amina oligomérica funcional de acrilato usada generalmente como un aditivo o diluyente para oligómeros más viscosos. Cuando se utiliza en formulaciones con un fotoiniciador del tipo de fotoabstracciónn (por ejemplo, benzofen...Vea Mas EBECRYL® 7100 es una resina de amina oligomérica funcional de acrilato usada generalmente como un aditivo o diluyente para oligómeros más viscosos. Cuando se utiliza en formulaciones con un fotoiniciador del tipo de fotoabstracciónn (por ejemplo, benzofenona), EBECRYL® 7100 tiene un efecto de aceleración de la velocidad de curado bajo luz UV. Se recomienda para: recubrimientos para papel y plásticos, barnices de sobreimpresión, tintas de serigrafía y acabados de madera. Vea Menos | Request Sample |
| EBECRYL® 780 | Allnex | EBECRYL® 780 is a highly functional, carboxylic acid containing methacrylate oligomer diluted in 2-methoxy-1-propanol solvent. EBECRYL® 780 exhibits good cure speed, good gloss characteristics, low shrinkage and good adhesion to metal. It is especially su...Vea Mas EBECRYL® 780 is a highly functional, carboxylic acid containing methacrylate oligomer diluted in 2-methoxy-1-propanol solvent. EBECRYL® 780 exhibits good cure speed, good gloss characteristics, low shrinkage and good adhesion to metal. It is especially suitable for use in the topcoat of vacuum metallized cosmetic and filmic applications. Vea Menos | Request Sample |
| EBECRYL® 853 | Allnex | Ebecryl® 853 is a trifunctional low viscous diluting acrylate giving low odour after UV or EB curing and low extractables It is compatible with a wide range of acrylated resins.\r\nEbecryl®853 was designed to produce low irritant formulations and contains...Vea Mas Ebecryl® 853 is a trifunctional low viscous diluting acrylate giving low odour after UV or EB curing and low extractables It is compatible with a wide range of acrylated resins.\r\nEbecryl®853 was designed to produce low irritant formulations and contains less than 0.1 % TMPTA. Vea Menos | Request Sample |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| Epodil® 748 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | Epodil® 748 Reactive Diluent is the glycidyl ether of a mixture of C12-C14 aliphatic alcohols used to reduce the viscosity of epoxy resin systems. It is a monofunctional reactive diluent, which provides excellent viscosity reduction. In addition the low l...Vea Mas Epodil® 748 Reactive Diluent is the glycidyl ether of a mixture of C12-C14 aliphatic alcohols used to reduce the viscosity of epoxy resin systems. It is a monofunctional reactive diluent, which provides excellent viscosity reduction. In addition the low level of volatility and ability to reduce the surface tension of epoxy resins make this product a general purpose diluent. Vea Menos | Request Sample |
| Epodil® 749 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | Epodill® 749 Reactive Diluent is neopentyl glycol diglycidyl ether used to reduce the viscosity of epoxy resin systems. It is a difunctional reactive diluent, which provides good viscosity reduction with minimal reduction in physical properties. This prod...Vea Mas Epodill® 749 Reactive Diluent is neopentyl glycol diglycidyl ether used to reduce the viscosity of epoxy resin systems. It is a difunctional reactive diluent, which provides good viscosity reduction with minimal reduction in physical properties. This product is applied in laminates, flooring and motars, and potting and encapsulation. Vea Menos | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...Vea Mas EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. Vea Menos | Request Sample |
| Epokukdo LGE | Kukdo Chemical Co., Ltd. | Epokukdo LGE is a reactive diluent which is glycidyl ether of a mixture of C12 - C14 aliphatic alcohols used in order to reduce the viscosity of epoxy resin. LGE is a monofunctional reactive diluent which has low toxicity, low vapor pressure and low volat...Vea Mas Epokukdo LGE is a reactive diluent which is glycidyl ether of a mixture of C12 - C14 aliphatic alcohols used in order to reduce the viscosity of epoxy resin. LGE is a monofunctional reactive diluent which has low toxicity, low vapor pressure and low volatile content. Also, LGE provides good flexibility and adhesion on nonpolar surfaces. Therefore, LGE can be used in various paints, floor coating, etc. Vea Menos | |
| Epokukdo Neotohto-E | Kukdo Chemical Co., Ltd. | Epokukdo Neotohto-E is a synthetic saturated monocarboxylic acid which has highly branched molecular structure. Neothoto-E can be used for reactive diluent of epoxy resin and intermediate for the manufacturing alkyd and polyester resin. Neotohto-E can be ...Vea Mas Epokukdo Neotohto-E is a synthetic saturated monocarboxylic acid which has highly branched molecular structure. Neothoto-E can be used for reactive diluent of epoxy resin and intermediate for the manufacturing alkyd and polyester resin. Neotohto-E can be used to reduce the viscosity of mother resin which is a standard liquid epoxy resin like YD-128. Vea Menos | |
| Epokukdo Neotohto-P | Kukdo Chemical Co., Ltd. | Epokukdo Neotohto-P, difunctional polyglycidyl epoxide which is 100% epoxy resin provides very low viscosity, high flexibility and very clear color in combination with standard liquid epoxy resin such as YD-128. Neotohto-P is well suited as an additive in...Vea Mas Epokukdo Neotohto-P, difunctional polyglycidyl epoxide which is 100% epoxy resin provides very low viscosity, high flexibility and very clear color in combination with standard liquid epoxy resin such as YD-128. Neotohto-P is well suited as an additive in various paints, adhesives, potting, etc. Vea Menos | |
| Epokukdo PG-202 | Kukdo Chemical Co., Ltd. | Epokukdo PG-202, difunctional reactive diluent is an aliphatic glycidyl ether, which is used for reducing the viscosity of epoxy resin systems. Since difunctional diluents, in general, may cause poor physical properties, the minimum amount of need should ...Vea Mas Epokukdo PG-202, difunctional reactive diluent is an aliphatic glycidyl ether, which is used for reducing the viscosity of epoxy resin systems. Since difunctional diluents, in general, may cause poor physical properties, the minimum amount of need should be used to achieve the desired viscosity reduction. PG-202, reactive diluent is suitable low volatile levels. Therefore, problems generated from poorly ventilated areas are minimized. It is recommended for laminates, exposed aggregate, potting and flooring applications. Vea Menos | |
| Epokukdo PG-207P | Kukdo Chemical Co., Ltd. | Epokukdo PG-207P, difunctional polyglycidyl Epoxide which is 100% epoxy resin provides very low viscosity, high flexibility and very clear color in combination with standard liquid epoxy resin such as YD-128. PG-207P can be used to reduce the viscosity o...Vea Mas Epokukdo PG-207P, difunctional polyglycidyl Epoxide which is 100% epoxy resin provides very low viscosity, high flexibility and very clear color in combination with standard liquid epoxy resin such as YD-128. PG-207P can be used to reduce the viscosity of mother resin which is a standard liquid epoxy resin like YD-128. Vea Menos | |
| Epokukdo PP-101 | Kukdo Chemical Co., Ltd. | Epokukdo PP-101, monofunctional reactive diluent is an aliphatic glycidyl ether, which is used for reducing the viscosity of epoxy resin systems. It can provide low viscosity accompanied with high flexibility and very clear color in combination with stand...Vea Mas Epokukdo PP-101, monofunctional reactive diluent is an aliphatic glycidyl ether, which is used for reducing the viscosity of epoxy resin systems. It can provide low viscosity accompanied with high flexibility and very clear color in combination with standard liquid epoxy resin such as YD-128. Vea Menos | |
| Epotec® RD 103 | Aditya Birla | Epotec® RD 103 is a low viscosity, aliphatic di-epoxide compound based on 1,4-butane diol. It is a reactive diluent for high viscosity epoxy resins. This product is well suited for use in structural adhesives and coatings for filament winding, lamination,...Vea Mas Epotec® RD 103 is a low viscosity, aliphatic di-epoxide compound based on 1,4-butane diol. It is a reactive diluent for high viscosity epoxy resins. This product is well suited for use in structural adhesives and coatings for filament winding, lamination, electronic encapsulation, and other industrial applications. Vea Menos | |
| Epotec® RD 104 | Aditya Birla | Epotec® RD 104 is a mono-functional, phenol-based glycidyl ether, primarily used for reducing the viscosity of conventional epoxy resins. This product is ideal for use in adhesives and casting, flooring, and construction applications. | |
| Epotec® RD 105 | Aditya Birla | Epotec® RD 105 is a mono-functional, o-Cresol-based reactive diluent primarily used for reducing the viscosity of conventional epoxy resins. It features excellent retention of mechanical and chemical resistance properties, with no influence on reactivity....Vea Mas Epotec® RD 105 is a mono-functional, o-Cresol-based reactive diluent primarily used for reducing the viscosity of conventional epoxy resins. It features excellent retention of mechanical and chemical resistance properties, with no influence on reactivity. This product is ideal for use in adhesives and flooring, casting, & construction coatings. Vea Menos | |
| Epotec® RD 106 | Aditya Birla | Epotec® RD 106 is an aromatic, mono-functional, p-tertiary butyl phenol-based reactive diluent. It features a combination of good electrical properties, low viscosity, low volatility, and low odor level. This product is ideal for use in coatings, adhesive...Vea Mas Epotec® RD 106 is an aromatic, mono-functional, p-tertiary butyl phenol-based reactive diluent. It features a combination of good electrical properties, low viscosity, low volatility, and low odor level. This product is ideal for use in coatings, adhesives, laminates, and flooring applications. Vea Menos | |
| Epotec® RD 107 | Aditya Birla | Epotec® RD 107 is a low viscosity, aliphatic di-epoxide compound based on 1,6-hexanediol, designed for use as a reactive diluent for high viscosity epoxy resins. It helps to improve toughness and retain chemical resistance in final formulations. This prod...Vea Mas Epotec® RD 107 is a low viscosity, aliphatic di-epoxide compound based on 1,6-hexanediol, designed for use as a reactive diluent for high viscosity epoxy resins. It helps to improve toughness and retain chemical resistance in final formulations. This product is ideal for use in structural adhesives, coatings, and filament winding, lamination, & electronic encapsulation applications. Vea Menos | |
| Epotec® RD 108 | Aditya Birla | Epotec® RD 108 is a mono-glycidyl ether of C12-C14 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. It features improved non-yellowing characteristics, excellent wetting properties, and low odor. This product is ideal f...Vea Mas Epotec® RD 108 is a mono-glycidyl ether of C12-C14 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. It features improved non-yellowing characteristics, excellent wetting properties, and low odor. This product is ideal for use in self-leveling flooring & screed applications, metal and concrete primers & coatings, and general purpose adhesives. Vea Menos | |
| Epotec® RD 109 | Aditya Birla | Epotec® RD 109 is a mono-glycidyl ether of C12-C13 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in self-leveling flooring applications, general purpose coatings, and general purpose adh...Vea Mas Epotec® RD 109 is a mono-glycidyl ether of C12-C13 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in self-leveling flooring applications, general purpose coatings, and general purpose adhesives. Vea Menos | |
| Epotec® RD 110 | Aditya Birla | Epotec® RD 110 is a mono-glycidyl ether of 2-ethyl hexanol, primarily used as a reactive diluent for high viscosity epoxy resins. It features very low viscosity and exceptional dilution efficiency. This product is ideal for use in flooring applications, c...Vea Mas Epotec® RD 110 is a mono-glycidyl ether of 2-ethyl hexanol, primarily used as a reactive diluent for high viscosity epoxy resins. It features very low viscosity and exceptional dilution efficiency. This product is ideal for use in flooring applications, coatings, and general purpose adhesives. Vea Menos | |
| Epotec® RD 111 | Aditya Birla | Epotec® RD 111 is a low viscosity, cyclo-aliphatic, di-functional epoxy reactive diluent based on cyclohexane dimethanol. It is designed primarily for use with high viscosity epoxy resins and offers improved UV resistance. This product is ideal for use in...Vea Mas Epotec® RD 111 is a low viscosity, cyclo-aliphatic, di-functional epoxy reactive diluent based on cyclohexane dimethanol. It is designed primarily for use with high viscosity epoxy resins and offers improved UV resistance. This product is ideal for use in coatings, civil applications, and electronic encapsulation. Vea Menos | |
| Epotec® RD 113 | Aditya Birla | Epotec® RD 113 is a low viscosity, trifunctional epoxy reactive diluent based on trimethylol propane. It features good cross-link density, which helps improve chemical resistance in formulations based on conventional BPA epoxy resins. This product is idea...Vea Mas Epotec® RD 113 is a low viscosity, trifunctional epoxy reactive diluent based on trimethylol propane. It features good cross-link density, which helps improve chemical resistance in formulations based on conventional BPA epoxy resins. This product is ideal for chemical resistant coatings, fast setting adhesives & sealants, tank linings, abrasion resistant castings, and encapsulation & other electronic applications. Vea Menos | |
| Epotec® RD 114LE | Aditya Birla | Epotec® RD 114LE is a diglycidyl ether of neopentyl glycol, designed primarily as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in coatings and adhesives. | |
| Epotec® RD 119LE | Aditya Birla | Epotec® RD 119LE is a diglycidyl ether of polypropylene glycol which, when blended with conventional epoxy resins, improves flexibility, increases elongation, improves impact resistance, and reduces viscosity. This product is ideal for use in automotive c...Vea Mas Epotec® RD 119LE is a diglycidyl ether of polypropylene glycol which, when blended with conventional epoxy resins, improves flexibility, increases elongation, improves impact resistance, and reduces viscosity. This product is ideal for use in automotive coatings & adhesives, tank linings, coil coatings, and flooring applications. Vea Menos | |
| Epotec® RD 121 | Aditya Birla | Epotec® RD 121 is a low color di-epoxide, based on dipropylene glycol, which improves flexibility and impact strength and increases elongation in cured systems. This product is ideal for use in adhesives and protective and marine coatings. | |
| ETERNACOLL® EHO | UBE Chemical Europe | Es un líquido incoloro, inodoro, con menos irritación cutánea y ocular. Ames negativo. Baja viscosidad y alta miscibilidad con varios productos químicos. Apropiados como un diluyente para los materiales sólidos y viscoso. Tiene un resto alcohol primario y...Vea Mas Es un líquido incoloro, inodoro, con menos irritación cutánea y ocular. Ames negativo. Baja viscosidad y alta miscibilidad con varios productos químicos. Apropiados como un diluyente para los materiales sólidos y viscoso. Tiene un resto alcohol primario y es muy utilizado intermediario sintético para una amplia variedad de derivados de oxetano. Vea Menos | |
| ETERNACOLL® OXMA | UBE Chemical Europe | Un monómero híbrido con un resto de metacrilato y un anillo de oxetano. Curable por radicales libres de técnicas de polimerización que le permite co-polimerizar con diversos compuestos insaturados. El anillo oxetano no se ve afectado por polimerización po...Vea Mas Un monómero híbrido con un resto de metacrilato y un anillo de oxetano. Curable por radicales libres de técnicas de polimerización que le permite co-polimerizar con diversos compuestos insaturados. El anillo oxetano no se ve afectado por polimerización por radicales. También son utilizados como un diluyente. Vea Menos | |
| GENOMER* 1121M | Rahn AG | GENOMER* 1121M is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: automotive coatings, coatings on metal and metallized substrates; coatings on plastics; coa...Vea Mas GENOMER* 1121M is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: automotive coatings, coatings on metal and metallized substrates; coatings on plastics; coatings on glass; adhesives; and polymerization and copolymerization in emulsions and solutions. Vea Menos | Request Sample |
| GENOMER* 1122 | Rahn AG | GENOMER* 1122 is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; ...Vea Mas GENOMER* 1122 is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; laminating adhesives; and adhesives. Vea Menos | Request Sample |
| GENOMER* 1122TF | Rahn AG | GENOMER* 1122TF is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings...Vea Mas GENOMER* 1122TF is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; laminating adhesives; and adhesives. Vea Menos | Request Sample |
| GENOMER* 1125 | Rahn AG | GENOMER* 1125 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. This product is a monofunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. | Request Sample |
| GENOMER* 1226 | Rahn AG | GENOMER* 1126 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. This product is a di-functional acrylate that exhibits low viscosity, low odor and good cutting power. | Request Sample |
| GENOMER* 1231 | Rahn AG | GENOMER* 1231 is a difunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. It offers excellent flexibility, excellent toughness, low yellowing, good heat resistance, and good chemical resistance. This product ...Vea Mas GENOMER* 1231 is a difunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. It offers excellent flexibility, excellent toughness, low yellowing, good heat resistance, and good chemical resistance. This product is recommended for coatings on metals and metallized substrates, coatings on glass, plastics, wood and paper, coatings on optical fiber, adhesives, electronics, and inks. Vea Menos | Request Sample |
| Grilonit® Epoxide 8 | EMS-CHEMIE AG (PRIMID) | Grilonit® Epoxide 8 is a C12/C14-alkyl glycidyl ether formulated to provide low toxicity and vapor pressure, good diluting power, and reduced reactivity. This product is used in reducing system viscosity and enhancing properties for civil engineering and ...Vea Mas Grilonit® Epoxide 8 is a C12/C14-alkyl glycidyl ether formulated to provide low toxicity and vapor pressure, good diluting power, and reduced reactivity. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. Vea Menos | |
| Grilonit® F 704 | EMS-CHEMIE AG (PRIMID) | Grilonit® F 704 is a polypropyleneglycol diglycidyl ether formulated as a flexibilizer that provides low toxicity and vapor pressure, reduced reactivity, and limited diluting power. This product is used in reducing system viscosity and enhancing propertie...Vea Mas Grilonit® F 704 is a polypropyleneglycol diglycidyl ether formulated as a flexibilizer that provides low toxicity and vapor pressure, reduced reactivity, and limited diluting power. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. Vea Menos | |
| Grilonit® RV 1806 | EMS-CHEMIE AG (PRIMID) | Grilonit® RV 1806 is a 1,4-butane diglycidyl ether reactive diluent formulated to provide good reactivity at low temperatures, good solvent resistance, high mechanical strength, and limited acid resistance. This product is used in reducing system viscosit...Vea Mas Grilonit® RV 1806 is a 1,4-butane diglycidyl ether reactive diluent formulated to provide good reactivity at low temperatures, good solvent resistance, high mechanical strength, and limited acid resistance. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. Vea Menos | |
| Grilonit® RV 1807.41 | EMS-CHEMIE AG (PRIMID) | Grilonit® RV 1807.41 is a 2-ethylhexyl glycidyl ether formulated to provide good diluting effect and a higher vapor pressure. This product is used to reduce system viscosity and enhancing properties for civil engineering and construction applications. | |
| Grilonit® RV 1812 | EMS-CHEMIE AG (PRIMID) | Grilonit® RV 1812 is a 1,6-hexane diglycidyl ether formulated to provide good reactivity at low temperatures, good solvent resistance, high mechanical strength, and limited acid resistance. This product is used to reduce system viscosity and enhancing pro...Vea Mas Grilonit® RV 1812 is a 1,6-hexane diglycidyl ether formulated to provide good reactivity at low temperatures, good solvent resistance, high mechanical strength, and limited acid resistance. This product is used to reduce system viscosity and enhancing properties for civil engineering and construction applications. Vea Menos | |
| Grilonit® RV 1814 | EMS-CHEMIE AG (PRIMID) | Grilonit® RV 1814 is a C13/C15-alkyl glycidyl ether formulated to provide low toxicity and vapor pressure, good wetting and air release behavior, good diluting power, and reduced reactivity. This product is used in reducing system viscosity and enhancing ...Vea Mas Grilonit® RV 1814 is a C13/C15-alkyl glycidyl ether formulated to provide low toxicity and vapor pressure, good wetting and air release behavior, good diluting power, and reduced reactivity. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. Vea Menos | |
| Grilonit® V51-31 | EMS-CHEMIE AG (PRIMID) | Grilonit® V51-31 is a trimethylolpropane triglycidyl ether formulated to provide good mechanical strength and reactivity, hot water and solvent resistance, and limited diluting power. This product is used in reducing system viscosity and enhancing propert...Vea Mas Grilonit® V51-31 is a trimethylolpropane triglycidyl ether formulated to provide good mechanical strength and reactivity, hot water and solvent resistance, and limited diluting power. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. Vea Menos | |
| HDDA | Allnex | El HDDA (DIACRILATO DE HEXANODIOL) es un diluyente reactivo difuncional que se utiliza comúnmente como un componente de revestimientos y tintas curables mediante luz ultravioleta (UV) y haz de electrones (EB). El HDDA es particularmente útil en revestimie...Vea Mas El HDDA (DIACRILATO DE HEXANODIOL) es un diluyente reactivo difuncional que se utiliza comúnmente como un componente de revestimientos y tintas curables mediante luz ultravioleta (UV) y haz de electrones (EB). El HDDA es particularmente útil en revestimientos y tintas en los cuales se desea mejorar la elasticidad, la resistencia a la intemperie y la adherencia en combinación con una excelente resistencia al agua. Se recomienda su uso en: la mejora de la adherencia a los plásticos, el metal y el vidrio, y revestimientos y tintas duraderas en exteriores. Vea Menos | Request Sample |
| Incozol LV | Incorez Ltd. | Se Poliuretano ede utilizar como agente endurecedor multifuncional, permitiendo mayor flexibilidad en la formulación. Este producto es sin solvente y se Poliuretano ede utilizar con todos los prepolímeros alifáticos en la serie de INCOREZ 700 y 800. | Request Sample |
| K-FLEX® 148 | King Industries, Inc. | K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosit...Vea Mas K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosity to form higher solid content with good hardness and expanded flexibility. It appears as a clear, light straw liquid, offers good flow and leveling along with being 100% active. K-FLEX® 148 is soluble in ketones, alcohols, esters, Aromatic 100, Aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It is normally applied in office furniture coatings, automotive primers, coil coatings, overprint varnishes, and general industrials. Vea Menos | |
| K-FLEX® 171-90 | King Industries, Inc. | K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers lon...Vea Mas K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers long pot life, enhanced adhesion and flexibility. Because of its lower hydroxyl number, K-FLEX® 171-90 requires less crosslinker. K-FLEX® 171-90 can also be used as a modifier of aminoplast crosslinked coatings, inks and adhesives to enhance flexibility and adhesion. It appears as a clear, light straw liquid and offers high resistivity and low temperature cure. This product is soluble in esters, ketones, alcohols, aromatic 100 and aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be used in office furniture coatings, 2K urethane coatings, appliance coatings, elastomeric coatings, coil coatings, and epoxy flexibilizer. Vea Menos | |
| K-FLEX® 188 | King Industries, Inc. | K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure p...Vea Mas K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure produce exceptional and consistent performance and broad compatibility. K-FLEX® 188's primary hydroxyl groups also produce reactivity with epoxies in cationic thermal cure systems. This product is 100% active and offers, good flexibility, adhesion to plastics, and high resistivity. It appears as a clear, light straw liquid and is soluble in the aerospace, automotive refinish, and marine maintenance industries along with plastic substrates, overprint varnishes, glass laminates, and optical coatings. Vea Menos | |
| K-FLEX® 7301 | King Industries, Inc. | K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It i...Vea Mas K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy/ polyamide coatings, isocyanate crosslined coatings, and UV cure and oxidizing polymerization. Vea Menos | |
| K-FLEX® A307 | King Industries, Inc. | K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low hydroxyl number minimize...Vea Mas K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low hydroxyl number minimizes the crosslinker demand. It offers improved flexibility, light color, abrasion resistance, good balance of surface dry and pot life in 2K PU, and no acid functionality. It appears as a clear viscous liquid and is soluble in esters, alcohols, xylene, ketones, aromatic 100, and aromatic 150. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, industrial maintenance, aerospace, and plastic coatings. Vea Menos | |
| K-FLEX® A308 | King Industries, Inc. | K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed togeth...Vea Mas K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed together with higher hydroxyl number gives good adhesion and hardness with lower VOC levels. K-FLEX® A308 appears as a offers enhanced flexibility, light color, a balance of surface dry/pot life in 2K PU, no acid functionality, and abrasion resistance. It is soluble in esters, alcohols, Aromatic 100, Aromatic 150, ketones, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, plastic coatings, industrial maintenance, and aerospace. Vea Menos | |
| K-FLEX® UD-320 | King Industries, Inc. | K-FLEX® UD-320 is an aliphatic, high solids, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents except aliphatic and aromatic hydrocarbons. To gain aromatic solubility it has to be combined with a hydrogen bonding solvent...Vea Mas K-FLEX® UD-320 is an aliphatic, high solids, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents except aliphatic and aromatic hydrocarbons. To gain aromatic solubility it has to be combined with a hydrogen bonding solvent. This product has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 enhances the hardness of melamine crosslinked systems. When used to modify a 2-component polyurethane, it will enhance hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems. It also offers benefits like low VOC, chemical resistance, exterior durability, QUV resistance, and hydrolytic stability. This product can be used for machine/equipment coatings, automotive coatings, appliance coatings, wood and paper coatings, and aerospace coatings. Vea Menos | |
| K-FLEX® UD-320-100 | King Industries, Inc. | K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the u...Vea Mas K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the use of isocyanates. It appears as a viscous clear liquid and offers a low VOC, enhanced hardness, exterior durability, hydrolytic stability, QUV resistance, and is solvent and isocyanate free. This product is soluble in almost all organic solvents excluding aliphatic and aromatic hydrocarbons. The only was to get aromatic solubility is to combine it with a hydrogen bonding solvent. K-FLEX® UD-320-100 can be applied in industries like paper, automotive, wood, leather, and screen printing ink. Vea Menos | |
| K-FLEX® UD-350W | King Industries, Inc. | K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350...Vea Mas K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350W can be used as a reactive cosolvent replacement to enhance crosslink density, solids, film/resistance properties, and flow/leveling. It appears as a straw colored liquid and offers low VOC, water solubility, hardness, chemical resistance, hydrolytic stability, QUV resistance, and exterior durability. This is a product that is not soluble in aromatic and aliphatic hydrocarbons. It can used in making, coil coatings, wood coatings, can coatings, dip coatings, appliance coatings, automotive coatings, and overprint varnishes. Vea Menos | |
| K-FLEX® XM-3307 | King Industries, Inc. | K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appear...Vea Mas K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appears as a viscous liquid and offers fast dispersion time, high pigment loading, and high pigment transparency. It is soluble in ketones, alcohols, esters, aromatic hydrocarbons, and is not soluble in aliphatic hydrocarbons. It can be soluble in water if it is neutralized with an organic amine. K-FLEX® XM-3307 can also be applied in water-based coatings, solvent-based coatings, and can be used as an intercoat adhesion promoter. Vea Menos |
