| 4724-XT-80 High Solids VT Alkyd Copolymer Resin | Gabriel Performance Products | 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs. | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...Vea Mas 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. Vea Menos | |
| 4929-X-50 Silicone Modified Short Oil Alkyd | Gabriel Performance Products | 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. | |
| 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd | Gabriel Performance Products | 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry. | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5063-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...Vea Mas 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. Vea Menos | |
| Atresal C 144/70 D4 | Atcoat GmbH | Atresal C 144/70 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for paints and primers with good drying, pigment compatibility, and gloss conservation. Atcoat alkyd resins are based on natural raw materials like fatty aci...Vea Mas Atresal C 144/70 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for paints and primers with good drying, pigment compatibility, and gloss conservation. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 144/70 D4 has an oil length of 62, a solid of 70%, and a viscosity of 4200 to 5200 mPas. Vea Menos | |
| Atresal C17/60 D6 | Atcoat GmbH | Atresal C17/60 D6 K6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. ...Vea Mas Atresal C17/60 D6 K6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C17/60 D6 K6 has an oil length of 66, a solid of 60%, and a viscosity of 80 to 120 s (50% DIN4). Vea Menos | |
| Atresal C19/60 D4 | Atcoat GmbH | Atresal C19/60 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atr...Vea Mas Atresal C19/60 D4 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C19/60 D4 has an oil length of 66, a solid of 60%, and a viscosity of 4 to 7 Pas. Vea Menos | |
| Atresal C19/60 D6 | Atcoat GmbH | Atresal C19/60 D6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atr...Vea Mas Atresal C19/60 D6 is a long oil alkyd resin, consisting of soya and aliphatic naphtha, suitable for the formulation of corrosion and enamels protection paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C17/60 D6 K6 has an oil length of 66, a solid of 60%, and a viscosity of 80 to 160 s (50% DIN4). Vea Menos | |
| Atresal K1552/50 KY | Atcoat GmbH | Atresal K1552/50 KY is short oil alkyd resin, consisting of fatty acid, white spirit, and further solvent additives, that is suitable for fast air drying industrial coatings with good hardness, water resistant, and high body and gloss. Atcoat alkyd resins...Vea Mas Atresal K1552/50 KY is short oil alkyd resin, consisting of fatty acid, white spirit, and further solvent additives, that is suitable for fast air drying industrial coatings with good hardness, water resistant, and high body and gloss. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K1552/50 KY has an oil length of 29, a solid of 50%, and a viscosity of 190 to 250 sec. Vea Menos | |
| Atresal K2253/75 SN | Atcoat GmbH | Atresal K2253/75 SN is high solid short oil alkyd resin, consisting of talloil fatty acid and solvent naphta 150, suitable for industrial paints with good weather resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, ...Vea Mas Atresal K2253/75 SN is high solid short oil alkyd resin, consisting of talloil fatty acid and solvent naphta 150, suitable for industrial paints with good weather resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K2253/75 SN has an oil length of 41 a solid of 75%, and a viscosity of 90 to 125 dPas. Vea Menos | |
| Atresal K381/60 X | Atcoat GmbH | Atresal K381/60 X is short oil alkyd resin, consisting of vegetable oil and xylene, suitable for putties, fillers, and corrosion resistant primers with fast drying, flexible, and is stable on storage with alkaline pigments. Atcoat alkyd resins are based o...Vea Mas Atresal K381/60 X is short oil alkyd resin, consisting of vegetable oil and xylene, suitable for putties, fillers, and corrosion resistant primers with fast drying, flexible, and is stable on storage with alkaline pigments. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K381/60 X has an oil length of 38 a solid of 60%, and a viscosity of 120 to 170 sec. Vea Menos | |
| Atresal L1878/60 K3 | Atcoat GmbH | Atresal L1878/60 K3 is a long oil alkyd resin, consisting of vegetable oil and white spirit, suitable for the production of corrosion resistant paints and house paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and a...Vea Mas Atresal L1878/60 K3 is a long oil alkyd resin, consisting of vegetable oil and white spirit, suitable for the production of corrosion resistant paints and house paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L1878/60 K3 has an oil length of 61, a solid of 60%, and a viscosity of 90 to 120 sec. Vea Menos | |
| Atresal L1878/70 D4 | Atcoat GmbH | Atresal L1878/70 D4 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant lacquers and house paints with good gloss, color fastness, drying properties, and hardness. Atcoat alkyd r...Vea Mas Atresal L1878/70 D4 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant lacquers and house paints with good gloss, color fastness, drying properties, and hardness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L1878/70 D4 has an oil length of 61, a solid of 70%, and a viscosity of 120 to 160 dPas. Vea Menos | |
| Atresal L1878/75 D6 | Atcoat GmbH | Atresal L1878/75 D6 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant paints and house paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, a...Vea Mas Atresal L1878/75 D6 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant paints and house paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L1878/75 D6 has an oil length of 61, a solid of 75%, and a viscosity of 28 to 32 sec. Vea Menos | |
| Atresal L1878HS/85 D4 | Atcoat GmbH | Atresal L1878HS/85 D4 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant lacquers and high solid paints with good rubout, high hardness, and good drying properties. Atcoat alkyd...Vea Mas Atresal L1878HS/85 D4 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant lacquers and high solid paints with good rubout, high hardness, and good drying properties. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L1878HS/85 D4 has an oil length of 64, a solid of 85%, and a viscosity of 80 to 100 mPas. Vea Menos | |
| Atresal L2118/60 K3 | Atcoat GmbH | Atresal L2118/60 K3 is a long oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of color stable house paints and industrial lacquers based on air drying and special fatty acids. Atcoat alkyd resins are ba...Vea Mas Atresal L2118/60 K3 is a long oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of color stable house paints and industrial lacquers based on air drying and special fatty acids. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L2118/60 K3 has an oil length of 64, a solid of 60%, and a viscosity of 90 to 120 sec. Vea Menos | |
| Atresal L2453/60 D6 | Atcoat GmbH | Atresal L2453/60 D6 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of house paints and corrosion resistant paints and house paints, due to its compatibility with alkaline pigments, which is durabl...Vea Mas Atresal L2453/60 D6 is a long oil alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of house paints and corrosion resistant paints and house paints, due to its compatibility with alkaline pigments, which is durable and has good process-ability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L2453/60 D6 has an oil length of 64, a solid of 60%, and a viscosity of 120 to 150 sec. Vea Menos | |
| Atresal L2453/60 IPH | Atcoat GmbH | Atresal L2453/60 IPH is a long oil alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of house paints that is durable and has good process-ability, and is also recommended for corrosion resistant paints, due to its compa...Vea Mas Atresal L2453/60 IPH is a long oil alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of house paints that is durable and has good process-ability, and is also recommended for corrosion resistant paints, due to its compatibility with alkaline pigments. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L2453/60 IPH has an oil length of 64, a solid of 60%, and a viscosity of 120 to 150 sec. Vea Menos | |
| Atresal L68/75 D6 | Atcoat GmbH | Atresal L68/75 D6 is a long oil alkyd resin, consisting of fatty acid and aliphatic naphtha, suitable for weather resistant and color stable paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L68/75...Vea Mas Atresal L68/75 D6 is a long oil alkyd resin, consisting of fatty acid and aliphatic naphtha, suitable for weather resistant and color stable paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L68/75 D6 has an oil length of 68, a solid of 75%, and a viscosity of 35 to 45 sec. Vea Menos | |
| Atresal L68/75 IPH | Atcoat GmbH | Atresal L68/75 IPH is a long oil alkyd resin, consisting of fatty acid and isoparaffin, suitable for weather resistant and color stable paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L68/75 IPH ...Vea Mas Atresal L68/75 IPH is a long oil alkyd resin, consisting of fatty acid and isoparaffin, suitable for weather resistant and color stable paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L68/75 IPH has an oil length of 68, a solid of 75%, and a viscosity of 90 to 130 sec. Vea Menos | |
| Atresal LO 07 | Atcoat GmbH | Atresal LO 07 is a long oil alkyd resin, consisting of talloil fatty acid, suitable for paints with good pigment compatibility, good weather resistance, good flexibility, good adhesion, and is also recommended for wood stains and decorative paints. Atcoat...Vea Mas Atresal LO 07 is a long oil alkyd resin, consisting of talloil fatty acid, suitable for paints with good pigment compatibility, good weather resistance, good flexibility, good adhesion, and is also recommended for wood stains and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 07 has an oil length of 82, a solid of 100%, and a viscosity of 3000 to 5000 mPas. Vea Menos | |
| Atresal LO 09 | Atcoat GmbH | Atresal LO 09 is a long oil alkyd resin, consisting of high quality fatty acid, suitable for paints with good weathering, adhesion, drying properties, flexibility, and is also recommended for pigment preparations and low yellowing decorative enamels. Atco...Vea Mas Atresal LO 09 is a long oil alkyd resin, consisting of high quality fatty acid, suitable for paints with good weathering, adhesion, drying properties, flexibility, and is also recommended for pigment preparations and low yellowing decorative enamels. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 09 has an oil length of 82, a solid of 100%, and a viscosity of 800 to 2000 mPas. Vea Menos | |
| Atresal LO33/70 D4 | Atcoat GmbH | Atresal LO33/70 D4 is a long oil alkyd resin, consisting of soya, linseed, and aliphatic naphtha, which has good gloss resistance, good adhesion, weather resistance, flexibility, and is suitable for exterior and interior use in coating systems for the mar...Vea Mas Atresal LO33/70 D4 is a long oil alkyd resin, consisting of soya, linseed, and aliphatic naphtha, which has good gloss resistance, good adhesion, weather resistance, flexibility, and is suitable for exterior and interior use in coating systems for the marine area and decorative paints with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO33/70 D4 has an oil length of 62, a solid of 70%, and a viscosity of 5000 to 9000 mPas. Vea Menos | |
| Atresal LO490/85 TPnB | Atcoat GmbH | Atresal LO490/85 is a low viscous long oil alkyd resin, consisting of high quality fatty acid and dowanol TPnB, suitable for the production of paints with good weather resistance, good flexibility, good adhesion, and is recommended for pigment pastes, low...Vea Mas Atresal LO490/85 is a low viscous long oil alkyd resin, consisting of high quality fatty acid and dowanol TPnB, suitable for the production of paints with good weather resistance, good flexibility, good adhesion, and is recommended for pigment pastes, low yellowing decorative paints, and wood stains. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO490/85 has an oil length of 65, a solid of 85%, and a viscosity of 1500 to 3000 mPas. Vea Menos | |
| Atresal LO95/60 K6 | Atcoat GmbH | Atresal LO95/60 K6 is a long oil alkyd resin, consisting of talloil fatty acid and white spirit, suitable for interior and exterior paints with low yellowing, good adhesion, weather resistance, gloss resistance, and flexibility. Atcoat alkyd resins are ba...Vea Mas Atresal LO95/60 K6 is a long oil alkyd resin, consisting of talloil fatty acid and white spirit, suitable for interior and exterior paints with low yellowing, good adhesion, weather resistance, gloss resistance, and flexibility. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO95/60 K6 has an oil length of 74, a solid of 60%, and a viscosity of 80 to 130 s (60% DIN4). Vea Menos | |
| Atresal M2391/50 D X | Atcoat GmbH | Atresal M2391/50 D X is medium oil fast drying alkyd resin, consisting of high quality fatty acid, aliphatic naphtha, and xylene, that is suitable for the production of high quality air drying industrial coatings, radiator and machine paints, with through...Vea Mas Atresal M2391/50 D X is medium oil fast drying alkyd resin, consisting of high quality fatty acid, aliphatic naphtha, and xylene, that is suitable for the production of high quality air drying industrial coatings, radiator and machine paints, with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M2391/50 D X has an oil length of 49, a solid of 50%, and a viscosity of 90 to 120 sec. Vea Menos | |
| Atresal M491/50 K2 Y | Atcoat GmbH | Atresal M491/50 K2 Y is medium oil alkyd resin, consisting of high quality fatty acid, white spirit, and further solvent additives, suitable for the production of high quality air drying industrial coatings, radiator and machine paints, with through dryi...Vea Mas Atresal M491/50 K2 Y is medium oil alkyd resin, consisting of high quality fatty acid, white spirit, and further solvent additives, suitable for the production of high quality air drying industrial coatings, radiator and machine paints, with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M491/50 K2 Y has an oil length of 49, a solid of 50%, and a viscosity of 65 to 80 sec. Vea Menos | |
| Atresal M49/50 D4 | Atcoat GmbH | Atresal M49/50 D4 is medium oil alkyd resin, consisting of fatty acid and aliphatic naphtha, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast surface....Vea Mas Atresal M49/50 D4 is medium oil alkyd resin, consisting of fatty acid and aliphatic naphtha, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/50 D4 has an oil length of 49, a solid of 50%, and a viscosity of 110 to 140 sec. Vea Menos | |
| Atresal M49/50 K2 | Atcoat GmbH | Atresal M49/50 K2 is medium oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast ...Vea Mas Atresal M49/50 K2 is medium oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/50 K2 has an oil length of 49, a solid of 50%, and a viscosity of 45 to 55 sec. Vea Menos | |
| Atresal M49/50 K3 | Atcoat GmbH | Atresal M49/50 K3 is medium oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast ...Vea Mas Atresal M49/50 K3 is medium oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of high quality air drying industrial coatings, car repair lacquers, radiator and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/50 K3 has an oil length of 49, a solid of 50%, and a viscosity of 45 to 55 sec. Vea Menos | |
| Atresal M49/55 D4 | Atcoat GmbH | Atresal M49/55 D4 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and f...Vea Mas Atresal M49/55 D4 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/55 D4 has an oil length of 49, a solid of 55%, and a viscosity of 110 to 114 sec. Vea Menos | |
| Atresal M49/55 K3 | Atcoat GmbH | Atresal M49/55 K3 is medium oil fast drying alkyd resin, consisting of fatty acid and white spirit, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoa...Vea Mas Atresal M49/55 K3 is medium oil fast drying alkyd resin, consisting of fatty acid and white spirit, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49/55 K3 has an oil length of 49, a solid of 55%, and a viscosity of 45 to 55 sec. Vea Menos | |
| Atresal M49HS/75 BA | Atcoat GmbH | Atresal M49HS/75 BA is medium oil fast drying alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast ...Vea Mas Atresal M49HS/75 BA is medium oil fast drying alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49P/55 K3 has an oil length of 49, a solid of 75%, and a viscosity of 60 to 80 dPas. Vea Menos | |
| Atresal M49M/55 D4 | Atcoat GmbH | Atresal M49M/55 D4 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and ...Vea Mas Atresal M49M/55 D4 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49M/55 D4 has an oil length of 49, a solid of 55%, and a viscosity of 120 to 180 sec. Vea Menos | |
| Atresal M49P/55 K3 | Atcoat GmbH | Atresal M49P/55 K3 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast ...Vea Mas Atresal M49P/55 K3 is medium oil fast drying alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of radiator paints, high quality air drying industrial coatings, and machine paints with through drying and fast surface. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M49P/55 K3 has an oil length of 49, a solid of 55%, and a viscosity of 20000 to 40000 mPas. Vea Menos | |
| Atresal MO 34/52 D4 | Atcoat GmbH | Atresal MO 34/52 D4 is medium oil alkyd resin, consisting of talloil fatty acid and aliphatic naphtha, suitable for low yellowing paints with good weather resistance, hardness, impact resistance, and flexibility. Atcoat alkyd resins are based on natural r...Vea Mas Atresal MO 34/52 D4 is medium oil alkyd resin, consisting of talloil fatty acid and aliphatic naphtha, suitable for low yellowing paints with good weather resistance, hardness, impact resistance, and flexibility. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal MO 34/52 D4 has an oil length of 55, a solid of 52%, and a viscosity of 6 to 9 Pas. Vea Menos | |
| Atresal SO 485/60 X | Atcoat GmbH | Atresal SO 485/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for fast drying paints with good weather resistance, low yellowing, good adhesion, chalking resistance, flexibility, hardness, and is also recommended...Vea Mas Atresal SO 485/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for fast drying paints with good weather resistance, low yellowing, good adhesion, chalking resistance, flexibility, hardness, and is also recommended for machinery enamels and industrial coatings. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal SO 485/60 X has an oil length of 33 a solid of 60%, and a viscosity of 3.8 to 4.8 Pas. Vea Menos | |
| Atresal SO 498/65 BA | Atcoat GmbH | Atresal SO 498/65 BA is short oil alkyd resin, consisting of castor oil and butylacetat, suitable for industrial coatings with good hardness and abrasion resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and anima...Vea Mas Atresal SO 498/65 BA is short oil alkyd resin, consisting of castor oil and butylacetat, suitable for industrial coatings with good hardness and abrasion resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal SO 498/65 BA has an oil length of 42 a solid of 65%, and a viscosity of 1600 to 2600 mPas. Vea Menos | |
| Atresal ST 31/60 BA | Atcoat GmbH | Atresal ST 31/60 BA is a styrene modified alkyd resin, consisting of fatty acid, tung, and butylacetat, with good re-coat-ability, good water, chemical resistance, and fast drying. Atcoat alkyd resins are based on natural raw materials like fatty acids, p...Vea Mas Atresal ST 31/60 BA is a styrene modified alkyd resin, consisting of fatty acid, tung, and butylacetat, with good re-coat-ability, good water, chemical resistance, and fast drying. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal ST 31/60 BA has an oil length of 31, a solid of 60%, and a viscosity of 14.5 to 19.5 dPas. Vea Menos | |
| Atresal ST 31/60 SN | Atcoat GmbH | Atresal ST 31/60 SN is a styrene modified alkyd resin, consisting of high quality fatty acid, tung, and solvent naphta 150, suitable for the production of fast drying topcoats and base coats with good chemical and water resistance. Atcoat alkyd resins are...Vea Mas Atresal ST 31/60 SN is a styrene modified alkyd resin, consisting of high quality fatty acid, tung, and solvent naphta 150, suitable for the production of fast drying topcoats and base coats with good chemical and water resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal ST 31/60 SN has an oil length of 31, a solid of 60%, and a viscosity of 17 to 27 dPas. Vea Menos | |
| Atresal ST 31/60 X | Atcoat GmbH | Atresal ST 31/60 X is a styrene modified alkyd resin, consisting of fatty acid and tung, with good recoatability, chemical resistance, water resistance, and fast drying. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and a...Vea Mas Atresal ST 31/60 X is a styrene modified alkyd resin, consisting of fatty acid and tung, with good recoatability, chemical resistance, water resistance, and fast drying. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal ST 31/60 X has an oil length of 31, a solid of 60%, and a viscosity of 17 to 27 dPas. Vea Menos | |
| Atresil M52/85 D4 | Atcoat GmbH | Atresil M52/85 D4 is a silicone modified high solid medium oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, which is recommended for high weather proof outdoor paints. Atcoat alkyd resins are based on natural raw materials lik...Vea Mas Atresil M52/85 D4 is a silicone modified high solid medium oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, which is recommended for high weather proof outdoor paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresil M52/85 D4 has an oil length of 56, a solid of 85%, and a viscosity of 2 to 10 Pas. Vea Menos | |
| Atrethix 0/60 K6 | Atcoat GmbH | Atrethix 0/60 K6 is a thix-alkyd resin, consisting of talloil fatty acid, soya, and white spirit, with a rate of 30 to 70% is recommended for paints with high anti-sagging, stability properties, and good brush-ability. Atcoat alkyd resins are based on nat...Vea Mas Atrethix 0/60 K6 is a thix-alkyd resin, consisting of talloil fatty acid, soya, and white spirit, with a rate of 30 to 70% is recommended for paints with high anti-sagging, stability properties, and good brush-ability. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrethix 0/60 K6 has an oil length of 73 and a solid of 60%. Vea Menos | |
| Atrethix 1/60 K6 | Atcoat GmbH | Atrethix 1/60 K6 is a thix-alkyd resin, consisting of talloil fatty acid, soya, and white spirit, with good stability against syneresis and inhomogeneity even at low solid content and flexibility is maintained for a long time at outdoor exposure. Atcoat a...Vea Mas Atrethix 1/60 K6 is a thix-alkyd resin, consisting of talloil fatty acid, soya, and white spirit, with good stability against syneresis and inhomogeneity even at low solid content and flexibility is maintained for a long time at outdoor exposure. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrethix 1/60 K6 has an oil length of 75 and a solid of 60%. Vea Menos | |
| Atrethix 3/60 IPL | Atcoat GmbH | Atrethix 3/60 IPL is a thix-alkyd resin, consisting of talloil fatty acid and isoparaffin, with good stability against syneresis and inhomogeneity even at low solid content and flexibility is maintained for a long time at outdoor exposure. Atcoat alkyd re...Vea Mas Atrethix 3/60 IPL is a thix-alkyd resin, consisting of talloil fatty acid and isoparaffin, with good stability against syneresis and inhomogeneity even at low solid content and flexibility is maintained for a long time at outdoor exposure. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrethix 3/60 IPL has an oil length of 64 and a solid of 60%. Vea Menos | |
| Atrethix HS10/70 D6 | Atcoat GmbH | Atrethix HS10/70 D6 is a thix-alkyd resin, consisting of talloil fatty acid, soya, and aliphatic naphtha, suitable for HS paints with stability against syneresis and inhomogeneity and flexibility is maintained for a long time at outdoor exposure. Atcoat a...Vea Mas Atrethix HS10/70 D6 is a thix-alkyd resin, consisting of talloil fatty acid, soya, and aliphatic naphtha, suitable for HS paints with stability against syneresis and inhomogeneity and flexibility is maintained for a long time at outdoor exposure. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrethix HS10/70 D6 has an oil length of 63 and a solid of 70%. Vea Menos | |
| Atrethix HS20/70 D6 | Atcoat GmbH | Atrethix HS20/70 D6 is a thix-alkyd resin, consisting of soya and aliphatic naphtha, suitable for HS paints with stability against syneresis and inhomogeneity and flexibility is maintained for a long time at outdoor exposure. Atcoat alkyd resins are based...Vea Mas Atrethix HS20/70 D6 is a thix-alkyd resin, consisting of soya and aliphatic naphtha, suitable for HS paints with stability against syneresis and inhomogeneity and flexibility is maintained for a long time at outdoor exposure. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrethix HS20/70 D6 has an oil length of 63 and a solid of 70%. Vea Menos | |
| BAM 203 X-60 | Bonyan Kala Chemie Co. | BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at...Vea Mas BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at 25°C and is mainly used in auto body repair paints, metallic paints, industrial machinery coatings, metal structural coatings, and industrial air-drying paints. Vea Menos | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...Vea Mas BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. Vea Menos | |
| BAM 208 WSX-55 | Bonyan Kala Chemie Co. | BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke ...Vea Mas BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, cabinet and spray paints, and industrial air-drying paints. Vea Menos | |
| BAM 212 X-60 | Bonyan Kala Chemie Co. | BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at ...Vea Mas BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, metallic paints, industrial air-drying paints, and paint paste. Vea Menos | |
| BAS 305 X-50 | Bonyan Kala Chemie Co. | BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...Vea Mas BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. Vea Menos | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...Vea Mas BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. Vea Menos | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...Vea Mas BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. Vea Menos | |
| BAS 312 X-60 | Bonyan Kala Chemie Co. | BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...Vea Mas BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. Vea Menos | |
| BAS 313 X-60 | Bonyan Kala Chemie Co. | BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...Vea Mas BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. Vea Menos | |
| BENASOL AS 3716 | Benasedo | BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber...Vea Mas BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. Vea Menos | Request Sample |
| BENASOL HS 6922 | Benasedo | BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...Vea Mas BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. Vea Menos | Request Sample |
| BENASOL HS 7100 | Benasedo | BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...Vea Mas BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. Vea Menos | Request Sample |
| BENASOL L 50 AV | Benasedo | BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...Vea Mas BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. Vea Menos | Request Sample |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...Vea Mas CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. Vea Menos | |
| CHS-Alkyd AL 3701 | Spolchemie | CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. Th...Vea Mas CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 37%. This product is primarily used for fast drying, lift resistant and anticorrosion coatings. Vea Menos | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...Vea Mas CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. Vea Menos | |
| CHS-Alkyd LUR 740 NN 80 | Spolchemie | CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....Vea Mas CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. Vea Menos | |
| CHS-Alkyd M 552 WX 60 | Spolchemie | CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder...Vea Mas CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder for producing universal coatings. This product is primarily used in formulations for anti-corrosive priming coats that are combined with chlorinated rubber and phenolic resins or amino resins. Vea Menos | |
| CHS-Alkyd S 401 X 55 | Spolchemie | CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...Vea Mas CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. Vea Menos | |
| CHS-Alkyd S 401 X 60 | Spolchemie | CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...Vea Mas CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. Vea Menos | |
| CHS-Alkyd S 471 X 60 | Spolchemie | CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...Vea Mas CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. Vea Menos | |
| CHS-Alkyd S 491 WB 55 | Spolchemie | CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...Vea Mas CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. Vea Menos | |
| CHS-Alkyd SUR 735 NN 80 | Spolchemie | CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....Vea Mas CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anti-corrosion. Vea Menos | |
| CHS-Alkyd T 501 WX 55 | Spolchemie | CHS-Alkyd T 501 WX 55 is a medium oiled binder for solvent borne coatings. This product is made from tall oil fatty acids and has low viscosity 55 percent solution in a mixture of white spirit and xylene. CHS-Alkyd T 501 WX 55 is a driver for formulating ...Vea Mas CHS-Alkyd T 501 WX 55 is a medium oiled binder for solvent borne coatings. This product is made from tall oil fatty acids and has low viscosity 55 percent solution in a mixture of white spirit and xylene. CHS-Alkyd T 501 WX 55 is a driver for formulating all purpose coatings to improve weathering and UV resistance, due to its low yellowing tendency. Vea Menos | |
| CHS-Alkyd TU 497 X 55 | Spolchemie | CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimat...Vea Mas CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 49%. CHS-Alkyd TU 497 X 55 is primarily used for producing of industrial coatings on metal surfaces and improves resistance to corrosion and weathering. Vea Menos | |
| Crestakyd® 10-3000 | Scott Bader | Crestakyd® 10-3000 is an air drying alkyd with excellent brushability & flow characteristics, as well as good gloss retention & weathering resistance for top quality gloss paints used in both decorative and marine applications. | |
| Crestakyd® 20-5024 | Scott Bader | Crestakyd® 20-5024 is used for air drying and low bake industrial finishes. | |
| Crestakyd® 20-5029 | Scott Bader | Crestakyd® 20-5029 is a chain stopped alkyd used for general industrial air drying finishes and machinery enamels. | |
| Crestakyd® 20-5036 | Scott Bader | Crestakyd® 20-5036 is a chain stopped alkyd used for general industrial air drying primers and enamels. | |
| Crestakyd® 20-9021 | Scott Bader | Crestakyd® 20-9021 is an economical chain stopped alkyd used for fast drying machinery enamels. | |
| Crestakyd® 20-9074 | Scott Bader | Crestakyd® 20-9074 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. It can be used for primers and other air-dry industrial finishes. | |
| Crestakyd® 30-5016 | Scott Bader | Crestakyd® 30-5016 is used for very quick drying industrial paints with good all round properties. | |
| Crestakyd® 30-5067 | Scott Bader | Crestakyd® 30-5067 is a fast drying short oil alkyd supplied in xylene for use in air dry and force dry primers and topcoats. Also used for marine paints. | |
| Crestakyd® 30-5068 | Scott Bader | Crestakyd® 30-5068 is a fast drying short oil alkyd for use in air-dry and force-dry primers and topcoats. It is recommended for use in air dry and force dry primers and topcoats in a variety of general industrial metal coating applications. | |
| Crestakyd® 30-9502 | Scott Bader | Crestakyd® 30-9502 is a short oil alkyd for high solids top coats with good colour and drying properties. | |
| Crestakyd® 41-6010 | Scott Bader | Crestakyd® 41-6010 is a styrene modified alkyd used for quick drying enamels. | |
| Crestakyd® 44-5043 | Scott Bader | Crestakyd® 44-5043 is a rosin and phenolic alkyd used for general purpose. Rosin and phenolic alkyd used for dry and excellent solvent release. | |
| HS31-70B | Tianyi Chemical Engineering Material Co., Ltd. | HS31-70B, in the form of a yellowish, viscous liquid, is a soya-oil based long oil alkyd resin that can be used in marine paints, container paints, magnetic paints, and corrosion-resistant coatings. This product contains 70% +/-2% solids. | |
| HS31-70C | Tianyi Chemical Engineering Material Co., Ltd. | HS31-70C, in the form of a yellowish, viscous liquid, is a soya-oil based long oil alkyd resin that can be used in marine paints, container paints, magnetic paints, and corrosion-resistant coatings. This product contains 70% +/-2% solids. | |
| Nebores® FP 262-55 W | NECARBO B.V. | Nebores® FP 262-55 W is a solvent free, medium alkyd emulsion 55% in water. This white liquid is amine free, weather resistant, has low VOC, and is suitable for pigmented wood and metal coatings. Nebores® FP 262-55 W finds application in high performance...Vea Mas Nebores® FP 262-55 W is a solvent free, medium alkyd emulsion 55% in water. This white liquid is amine free, weather resistant, has low VOC, and is suitable for pigmented wood and metal coatings. Nebores® FP 262-55 W finds application in high performance pigmented primers and coatings for decorative and industrial applications. Vea Menos | |
| Nebores® FPB 272-50 D | NECARBO B.V. | Nebores® FPB 272-50 D is a medium alkyd resin appearing as a light yellow liquid. 50% in Shellsol™ D 40, it improves dying and has through-drying properties at low temperatures, gloss and colour retention at elevated temperatures and in outdoor conditions...Vea Mas Nebores® FPB 272-50 D is a medium alkyd resin appearing as a light yellow liquid. 50% in Shellsol™ D 40, it improves dying and has through-drying properties at low temperatures, gloss and colour retention at elevated temperatures and in outdoor conditions, and adhesion on steel and primers. Nebores® FPB 272-50 D finds application in radiator paints requiring yellowing resistance, and in industrial coatings. Vea Menos | |
| Nebores® HLP 21-75 DP | NECARBO B.V. | Nebores® HLP 21-75 DP is an air-drying modified tung and linseed oil based alkyd resin. This brown liquid is 75% in Shellsol™ D25 / Monopropyleneglycol methylether and has through drying properties, is water resistant, and adheres on ferrous substrates. N...Vea Mas Nebores® HLP 21-75 DP is an air-drying modified tung and linseed oil based alkyd resin. This brown liquid is 75% in Shellsol™ D25 / Monopropyleneglycol methylether and has through drying properties, is water resistant, and adheres on ferrous substrates. Nebores® HLP 21-75 DP finds application in anti-corrosive primers with reduced solvent discharge, fillers, and primer surfacers for car-repair enamels. Vea Menos | |
| Nebores® HLP 21-80 X | NECARBO B.V. | Nebores® HLP 21-80 X is an air-drying modified tung and linseed oil based alkyd resin. This yellow liquid is 80% in xylene and has through drying properties, is water resistant, and adheres on ferrous substrates. Nebores® HLP 21-80 X finds application in ...Vea Mas Nebores® HLP 21-80 X is an air-drying modified tung and linseed oil based alkyd resin. This yellow liquid is 80% in xylene and has through drying properties, is water resistant, and adheres on ferrous substrates. Nebores® HLP 21-80 X finds application in anti-corrosive primers with reduced solvent discharge, fillers, and primer surfacers for car-repair enamels. Vea Menos | |
| Nebores® HLP 31-60 X | NECARBO B.V. | Nebores® HLP 31-60 X is an air-drying modified tung and tall oil fatty acid based alkyd resin. This light yellow liquid is 60% in xylene and has through drying properties, fast initial drying, and overspray tolerance. Nebores® HLP 31-60 X is water resista...Vea Mas Nebores® HLP 31-60 X is an air-drying modified tung and tall oil fatty acid based alkyd resin. This light yellow liquid is 60% in xylene and has through drying properties, fast initial drying, and overspray tolerance. Nebores® HLP 31-60 X is water resistant and adheres on ferrous substrates, finding application in anti-corrosive primers with reduced solvent discharge, fillers, and primer surfacers for car-repair enamels. Vea Menos | |
| Nebores® HTP 26-45 D | NECARBO B.V. | Nebores® HTP 26-45 D is an air-drying, modified alkyd resin based on tung and tall oil fatty acids. It provides excellent through-drying and corrosion resistance properties, good adhesion on ferrous substrates, and low xylene content. This product finds a...Vea Mas Nebores® HTP 26-45 D is an air-drying, modified alkyd resin based on tung and tall oil fatty acids. It provides excellent through-drying and corrosion resistance properties, good adhesion on ferrous substrates, and low xylene content. This product finds application in fast drying anti-corrosive primers, fillers, and primer surfacers for car-repair enamels. Vea Menos | |
| Nebores® HTP 30-50 | NECARBO B.V. | Nebores® HTP 30-50 is a modified, pentaerythritol-esterified, air-drying alkyd resin based on tung oil and tall oil fatty acids. It provides fast initial drying, excellent through drying, exceptional water resistance, good adhesion on ferrous substrates, ...Vea Mas Nebores® HTP 30-50 is a modified, pentaerythritol-esterified, air-drying alkyd resin based on tung oil and tall oil fatty acids. It provides fast initial drying, excellent through drying, exceptional water resistance, good adhesion on ferrous substrates, and low xylene content. This product finds application in anti-corrosive primers, fillers, and primer surfacers for car-repair enamels. Vea Menos | |
| Nebores® L 322-50 | NECARBO B.V. | Nebores® L 322-50 is an air-drying, medium oil alkyd resin based on glycerol-esterified linseed oil. It provides good durability and fast drying properties. This product finds application in aluminium paints, anti-corrosive primers, structural steel paint...Vea Mas Nebores® L 322-50 is an air-drying, medium oil alkyd resin based on glycerol-esterified linseed oil. It provides good durability and fast drying properties. This product finds application in aluminium paints, anti-corrosive primers, structural steel paints, automotive finishes, and marine paints. Vea Menos | |
| Nebores® LM 43-38 WBG | NECARBO B.V. | Nebores® LM 43-38 WBG is a water-dilutable alkyd resin based on special drying fatty acids. It provides good flow and pigment wetting, excellent water resistance, and fast drying properties. This product finds application in metal primers, air- and oven-d...Vea Mas Nebores® LM 43-38 WBG is a water-dilutable alkyd resin based on special drying fatty acids. It provides good flow and pigment wetting, excellent water resistance, and fast drying properties. This product finds application in metal primers, air- and oven-drying industrial lacquers, and hybrid paints. Vea Menos | |
| Nebores® R 31-55 X | NECARBO B.V. | Nebores® R 31-55 X is a short oil alkyd resin based on dehydrated castor oil. It provides good elasticity, excellent adhesion, and good colour retention properties. This product finds application in stoving enamels and primers for general industrial use. |
