| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...Vea Mas 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. Vea Menos | |
| 1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...Vea Mas Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. Vea Menos | |
| Hydrorene AW 1 | S.A.P.I.C.I. SpA | Hydrorene AW 1 is a water-dispersible isocyanate. This product can be used in 2k waterborne varnishes with good chemical or abrasion resistance. It can also be used in adhesives. | |
| n-Propanol | DCC (Dairen Chemical Corp.) | n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether...Vea Mas n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether. n-Propanol is used in solvents, as an intermediate chemical for synthesis, industrial coatings, adhesives, and printing inks. Vea Menos | |
| Ongronat® 3600 | BorsodChem Rt. | Ongronat® 3600 a mixture of methylenebis(phenylisocyanate) isomers. This product appears as a solvent-free, clear and colourless liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features weather-, che...Vea Mas Ongronat® 3600 a mixture of methylenebis(phenylisocyanate) isomers. This product appears as a solvent-free, clear and colourless liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features weather-, chemical- and abrasion resistance. It is very flexible, strong and durable. Vea Menos | |
| Polurene LP 100 LV | S.A.P.I.C.I. SpA | Polurene LP 100 LV is a polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and can be used to improve the flexibility of epoxy systems. It is designed for use in adhesives. | |
| Polurene LP 100 NFF | S.A.P.I.C.I. SpA | Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving t...Vea Mas Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving the flexibility of epoxy systems. Vea Menos | |
| Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...Vea Mas Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. Vea Menos | |
| Polytex™ E-75 | Estron Chemical, Inc. | Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a for...Vea Mas Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a formaldehyde-free resin alternative for nail lacquers. Polytex™ E-75 has compatibility with most commercial polymeric binders, pigments and plasticizers. Vea Menos | |
| Selvol 540 | Ichemco | Selvol 540 is a partially hydrolyzed polyvinyl alcohol with a degree of hydrolysis of 87-89%. This product has a VOC content of less than 5%. Selvol 540 is most commonly used in adhesive production applications. | |
| Selvol E 205 | Ichemco | Selvol E 205 is a partially hydrolyzed polyvinyl alcohol with a degree of hydrolysis of 87-89%. This product has a VOC content of less than 7%. Selvol E 205 is most commonly used in adhesive production applications. | |
| Selvol E 523 | Ichemco | Selvol E 523 is a partially hydrolyzed polyvinyl alcohol with a degree of hydrolysis of 87-89%. This product has a VOC content of less than 5% and a pH level of 4.5-6.5. Selvol E 523 is most commonly used in adhesive production applications. | |
| Trimethylolpropane Flakes | Perstorp | Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, ros...Vea Mas Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. Vea Menos | |
| Trimethylolpropane Molten | Perstorp | Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for sy...Vea Mas Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. Vea Menos | |
| Ucopol M 541 | S.A.P.I.C.I. SpA | Ucopol M 541 is a moisture-curing prepolymer. This product can be used to formulate 1K and 2K sealants and adhesives. It can be mixed with Ucopol M 551 in order to adjust the end product's flexibility or drying time. This product contains less than .5%...Vea Mas Ucopol M 541 is a moisture-curing prepolymer. This product can be used to formulate 1K and 2K sealants and adhesives. It can be mixed with Ucopol M 551 in order to adjust the end product's flexibility or drying time. This product contains less than .5% TDI isocyanates. Vea Menos | |
| Ucopol M 551 | S.A.P.I.C.I. SpA | Ucopol M 551 is a moisture-curing prepolymer. This product can be used to formulate 1K or 2K sealants and adhesives. It can be mixed with Ucopol M 541 in order to adjust the end product's flexibility or drying time. This product contains less than .5% ...Vea Mas Ucopol M 551 is a moisture-curing prepolymer. This product can be used to formulate 1K or 2K sealants and adhesives. It can be mixed with Ucopol M 541 in order to adjust the end product's flexibility or drying time. This product contains less than .5% TDI isocyanates. Vea Menos | |
| VISIOMER® PEG 8000 DMA W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® PEG 8000 DMA W (Polyethylene glycol 8000 dimethacrylate) is a long-chain hydrophilic, crosslinking monomer. It is used as a co-monomer in formulations for joint sealants to close construction gaps in concrete slabs, decks, and similar structures...Vea Mas VISIOMER® PEG 8000 DMA W (Polyethylene glycol 8000 dimethacrylate) is a long-chain hydrophilic, crosslinking monomer. It is used as a co-monomer in formulations for joint sealants to close construction gaps in concrete slabs, decks, and similar structures. Vea Menos |
