| Devolite™ | LEHVOSS Group | Devolite™ is a specially predispensed china clay. It has an alkaline pH and as the term predispersed implies will disperse readily in aqueous media without the need for defiocculant addition. | |
| ECCABOND N | LEHVOSS Group | ECCABOND N is a grey to fawn colored powder, sodium bentonite with high swelling, gelling, and bonding properties, designed for Foundry and general bonding and viscosifying purposes. | |
| GTY™ B | LEHVOSS Group | GTY™ B is a medium particle size kaolin produced from deposits in Brittany, France. It is recommended for a range of applications where color is of limited importance. | |
| Heavy Kaolin | LEHVOSS Group | Heavy Kaolin is a natural hydrated aluminum silicate prepared especially for industries that demand the high purity. | |
| Hexafil™ | LEHVOSS Group | Hexafil™ is a secondary clay (ball clay). the clay is processed to minimize the levels of coarse particles. This product is a pH conrolled, low cost, semi-reinforcing clay which is suitable for use where color is not of prime importance.. | |
| ImerSeal™ 50 | LEHVOSS Group | ImerSeal™ 50 is engineered for use in all sealant systems. It is specifically of interest where whiteness and high thixotropy are required and also where moisture sensitivity of the system is a consideration. ImerSeal™ 50 is an ultrafine, coated, ground...Vea Mas ImerSeal™ 50 is engineered for use in all sealant systems. It is specifically of interest where whiteness and high thixotropy are required and also where moisture sensitivity of the system is a consideration. ImerSeal™ 50 is an ultrafine, coated, ground calcium carbonate. It is produced from high quality naturally occurring deposits. It is characterized by its fine particle size, high whiteness, and low moisture characteristics. Vea Menos | |
| ImerSeal™ 75 | LEHVOSS Group | ImerSeal™ 75 is engineered for use in all sealant systems. It is specifically of interest for low modulus sealants where whiteness and high thixotropy are required and also where moisture sensitivity of the system is a consideration. It is an ultrafine, ...Vea Mas ImerSeal™ 75 is engineered for use in all sealant systems. It is specifically of interest for low modulus sealants where whiteness and high thixotropy are required and also where moisture sensitivity of the system is a consideration. It is an ultrafine, coated, ground calcium carbonate. It is produced from high quality naturally occurring deposits. This product is characterized by its fine particle size, high whiteness, and low moisture pick-up. Vea Menos | |
| MetaStar® 501 | LEHVOSS Group | MetaStar® 501 is a premium metakaolin produced by very carefully controlled calcination. It has been engineered with a high level of pozzolanic reactivity when used in portland cement based concrete, plaster, and mortar. When this product is used, it can ...Vea Mas MetaStar® 501 is a premium metakaolin produced by very carefully controlled calcination. It has been engineered with a high level of pozzolanic reactivity when used in portland cement based concrete, plaster, and mortar. When this product is used, it can react with the free lime by-product of portland cement hydration to form cementitous calcium silicate and calcium aluminate products, which can result in overall improved durability. Vea Menos | |
| MICA-MU™ 85F | LEHVOSS Group | MICA-MU™ 85F is a fine, dry ground mica. This product is used in water based decorative paints, solvent based decorative paints, as well as protective and OEM coatings. | |
| MICA-MU™ 101 | LEHVOSS Group | MICA-MU™ 101 is a fine, dry ground mica that is used in water based decorative paints, solvent based decorative paints, as well as protective and OEM coatings applications. | |
| MICA-MU™ 247 | LEHVOSS Group | MICA-MU™ 247 is a dry ground mica with low water demand. This product is used in water based decorative paints as well as protective and OEM coatings applications. | |
| MICA-MU™ 450 | LEHVOSS Group | MICA-MU™ 450 are mica flakes that have a glitter effect. This product is used in water based decorative paints - decorative effect applications. | |
| MICA-MU™ 454 | LEHVOSS Group | MICA-MU™ 454 are non-delaminated mica flakes. This product is used in water based decorative paints - decorative effect applications. | |
| MICA-MU™ M2/1 | LEHVOSS Group | MICA-MU™ M2/1 is a white, micronised mica. This product is used in water based decorative paints, solvent based decorative paints, protective and OEM coatings, as well as sealant primer applications. | |
| Polwhite™ B | LEHVOSS Group | Polwhite™ B is a high quality medium particle size kaolin produced from deposits in the South West of England. | |
| Polwhite™ E | LEHVOSS Group | Polwhite™ E is a high quality medium particle size kaolin produced from deposits in the South West of England. | |
| Speswhite™ | LEHVOSS Group | Speswhite™ is a highly refined kaolin of ultrafine particle size and high brightness from deposits in the South West of England. | |
| SILZOT® FS-X1 | AlzChem AG | SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride po...Vea Mas SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. Vea Menos | |
| SILZOT® RTP | AlzChem AG | SILZOT® RTP is a spray dried granulated silicon nitride powder containing processing and sintering additives. | |
| White Spirit | Braskem S.A. | White Spirit is a white mineral spirit. | |
| Almatis BayGranite®17 ATH (Aluminum Trihydroxide) | Almatis, Inc. | Almatis BayGranite®17 ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina, primarily used as a flame retardant additive for most polymer systems. BayGranite® 17 is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is pr...Vea Mas Almatis BayGranite®17 ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina, primarily used as a flame retardant additive for most polymer systems. BayGranite® 17 is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is produced through processing of alumina-bearing feedstocks. It is a dry powder, when heated above approximately 220°C it decomposes into approximately 35% water and 65% alumina by weight. Vea Menos | |
| Almatis FlameGard® ATH (Aluminum Trihydroxide) | Almatis, Inc. | Almatis FlameGard® ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina designed for use in polymer systems as a flame retardant and smoke suppressive additive. FlameGard is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, ...Vea Mas Almatis FlameGard® ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina designed for use in polymer systems as a flame retardant and smoke suppressive additive. FlameGard is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is produced through processing of alumina-bearing feedstocks. Although FlameGard is a dry powder, when heated above approximately 220°C it decomposes into approximately 35% water and 65% alumina by weight. Vea Menos | |
| GRANUVERRE® | Gebrüder Dorfner GmbH & Co. Kaolin- und Kristallquarzsand-Werke KG | GRANUVERRE® is a glass bead coated with inorganic pigments and silica-based binders. Due to the use of chemically highly stable inorganic pigments, GRANUVERRE® is characterized by high color fastness and low fading tendency . | |
| MICA-MU™ M2/1 | Imerys Performance Additives | MICA-MU™ M2/1 is a white, micronised mica. This product is used in water based decorative paints, solvent based decorative paints, protective and OEM coatings, as well as sealant primer applications. | |
| Graphene Nanoplatelets | DKSH | Graphene is an allotrope of carbon whose structure is a single planar sheet of sp2 bonded carbon atoms that are densely packed in a honeycomb crystal lattice. Graphene Nanoplatelets are reduced graphene layers.This product is available in Europe, Asia and...Vea Mas Graphene is an allotrope of carbon whose structure is a single planar sheet of sp2 bonded carbon atoms that are densely packed in a honeycomb crystal lattice. Graphene Nanoplatelets are reduced graphene layers.This product is available in Europe, Asia and North America. Vea Menos | Request Sample |
| Luzenac 0 | Imerys Performance Additives | Luzenac 0 is talc/chlorite with low oil absorption. Recommended for industrial applications such as low VOC coatings, plasters, adhesives and jointing compounds. | |
| Luzenac 00C | Imerys Performance Additives | Luzenac 00C is a high brightness talc/chlorite for decorative matte paints. Easy to disperse in water-based paints. Reduces mud-cracking. | |
| Luzenac 10M2 | Imerys Performance Additives | Luzenac 10M2 is a fine talc/chlorite. Recommended for water- and solvent-borne industrial primers and topcoats, and automotive primers. Provides pigment extension, rheology control, barrier properties, corrosion resistance, sandability and gloss adjustmen...Vea Mas Luzenac 10M2 is a fine talc/chlorite. Recommended for water- and solvent-borne industrial primers and topcoats, and automotive primers. Provides pigment extension, rheology control, barrier properties, corrosion resistance, sandability and gloss adjustment. Vea Menos | |
| Luzenac 20M2 | Imerys Performance Additives | Luzenac 20M2 is a multipurpose fine talc/chlorite. It is suitable for water- and solvent-borne industrial primers. This product enhances dispersability in water-based paints, lowers viscosities in polar and non-polar bases. | |
| Luzenac H100 | Imerys Performance Additives | Luzenac H100 is a coarse talc/chlorite with low oil absorption. Recommended for high build low VOC coatings and self-leveling floor coatings. | |
| Luzenac ST60 | Imerys Performance Additives | Luzenac ST60 is a standard talc/chlorite grade with low oil absorption for low VOC industrial primers providing good corrosion resistance. Allows high filling in polyester putties with good sandability. | |
| Steabright® | Imerys Performance Additives | Steabright® is a high brightness talc/chlorite for decorative paints. Provides optimal brightness, hiding power and matting. Easy to disperse in water-based paints. Reduces mud-cracking. | |
| Steamat® | Imerys Performance Additives | Steamat® is a talc/chlorite developed for matting of interior and exterior wall paints and masonry paints. Recommended for deep matt decorative paints and reduced mud-cracking. Provides good durability for exterior paints. The low oil absorption of this g...Vea Mas Steamat® is a talc/chlorite developed for matting of interior and exterior wall paints and masonry paints. Recommended for deep matt decorative paints and reduced mud-cracking. Provides good durability for exterior paints. The low oil absorption of this grade makes it suitable for use in high build low VOC marine and protective coatings. Vea Menos | |
| Steopac® | Imerys Performance Additives | Steopac® is a fine high brightness talc/chlorite for prime pigment extension in decorative coatings. Provides optimal opacity, gloss adjustment, rheology control and barrier properties in water- and solvent-borne paints and lacquers. Fine grade, easily di...Vea Mas Steopac® is a fine high brightness talc/chlorite for prime pigment extension in decorative coatings. Provides optimal opacity, gloss adjustment, rheology control and barrier properties in water- and solvent-borne paints and lacquers. Fine grade, easily dispersible in water-borne systems reducing energy consumption and improving productivity. Vea Menos | |
| Luzenac 20M0 | Imerys Performance Additives | Luzenac 20M0 is a multipurpose fine talc/chlorite. Suitable for water- and solvent-borne Decorative paints and Industrial primers. Enhances dispersability in water-based paints, lowers viscosities in polar and non-polar bases. | |
| Talkron® NT 30 | Minerals Girona S.A. | Talkron® NT 30 es un hidrosilicato de magnesio (talco) de alta pureza y estructura laminar con buen grado de blancura, lo que lo convierte en un producto ideal para usar en sistemas que requieren alto poder de cobertura, reducción del brillo y alto grado ...Vea Mas Talkron® NT 30 es un hidrosilicato de magnesio (talco) de alta pureza y estructura laminar con buen grado de blancura, lo que lo convierte en un producto ideal para usar en sistemas que requieren alto poder de cobertura, reducción del brillo y alto grado de pureza química. Tiene un índice de ignición de 8'07%, un contenido soluble HCI de 3'70% y un corte superior de 30 micras. Vea Menos | |
| Talkron® Zero 11 | Minerals Girona S.A. | Talkron® Zero 11 es un hidrosilicato de magnesio (talco) de alta pureza y estructura laminar con buen grado de blancura. Tiene baja absorción de aceite y área de superficie baja, lo que lo convierte en un producto ideal para usar en revestimientos de alto...Vea Mas Talkron® Zero 11 es un hidrosilicato de magnesio (talco) de alta pureza y estructura laminar con buen grado de blancura. Tiene baja absorción de aceite y área de superficie baja, lo que lo convierte en un producto ideal para usar en revestimientos de alto contenido de sólidos. Este producto tiene un índice de ignición de 8'07%, un contenido soluble HCI de 3'70% y un corte superior de 25 micras. Vea Menos | |
| Talkron® Zero 18 | Minerals Girona S.A. | Talkron® Zero 18 es un hidrosilicato de magnesio (talco) de alta pureza y estructura laminar con buen grado de blancura. Tiene baja absorción de aceite y área de superficie baja, lo que lo convierte en un producto ideal para usar en revestimientos de alto...Vea Mas Talkron® Zero 18 es un hidrosilicato de magnesio (talco) de alta pureza y estructura laminar con buen grado de blancura. Tiene baja absorción de aceite y área de superficie baja, lo que lo convierte en un producto ideal para usar en revestimientos de alto contenido de sólidos. Este producto tiene un índice de ignición de 8'07%, un contenido soluble HCI de 3'70% y un corte superior de 40 micras. Vea Menos | |
| Talkron® Zero 22 | Minerals Girona S.A. | Talkron® Zero 22 es un hidrosilicato de magnesio (talco) de alta pureza y estructura laminar con buen grado de blancura. Tiene baja absorción de aceite y área de superficie baja, lo que lo convierte en un producto ideal para usar en revestimientos de alto...Vea Mas Talkron® Zero 22 es un hidrosilicato de magnesio (talco) de alta pureza y estructura laminar con buen grado de blancura. Tiene baja absorción de aceite y área de superficie baja, lo que lo convierte en un producto ideal para usar en revestimientos de alto contenido de sólidos. Este producto tiene un índice de ignición de 8'07%, un contenido soluble HCI de 3'70% y un corte superior de 70 micras. Vea Menos | |
| Mistron® Monomix G | Imerys Performance Additives | Mistron® Monomix G is a fine high brightness talc used for pigment extension, gloss adjustment, rheology control, sandability, barrier effect, corrosion resistance and stain-blocking in industrial primers, topcoats, inks, wood coatings, automotive primers...Vea Mas Mistron® Monomix G is a fine high brightness talc used for pigment extension, gloss adjustment, rheology control, sandability, barrier effect, corrosion resistance and stain-blocking in industrial primers, topcoats, inks, wood coatings, automotive primers, decorative paints, colorants, gel coats and varnishes. Vea Menos | |
| Mistron® R20 G | Imerys Performance Additives | Mistron® R20 G is a high brightness talc suitable for decorative and industrial applications. Improves opacity, barrier properties, corrosion resistance, gloss control, sandability and stain blocking ability. | |
| Finntalc M03 | Elementis | Finntalc M03 is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility. It has a particle size <2 µm at 81%, and it has applications in powder coatings and can/coil/E-coat coatings. | Request Sample |
| Finntalc M05N | Elementis | Finntalc M05N is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility. It has 44% of the particle size <2 µm. It has applications in exterior flat emulsion paints, multi-purpose interior/exterio...Vea Mas Finntalc M05N is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility. It has 44% of the particle size <2 µm. It has applications in exterior flat emulsion paints, multi-purpose interior/exterior paints, interior flat emulsion paints, semi-gloss emulsion paints, wood primers, alkyd topcoats, silk and eggshell paints, powder coatings, yacht paints, gel coats, and can/coil/E-coat coatings. Vea Menos | Request Sample |
| Finntalc M05SL | Elementis | Finntalc M05SL is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 44% of the particle size <2 µm. It has a top cut particle size of 8.8 µm. It has applications in exterior flat emu...Vea Mas Finntalc M05SL is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 44% of the particle size <2 µm. It has a top cut particle size of 8.8 µm. It has applications in exterior flat emulsion paints, multi-purpose interior/exterior paints, interior flat emulsion paints, semi-gloss emulsion paints, wood primers, alkyd topcoats, silk and eggshell paints, powder coatings, yacht paints, gel coats, and can/coil/E-coat coatings. Vea Menos | Request Sample |
| Finntalc M10E | Elementis | Finntalc M10E is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 35% of the particle size <2 µm. It has applications in general industrial protective coatings, heavy duty maintenan...Vea Mas Finntalc M10E is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 35% of the particle size <2 µm. It has applications in general industrial protective coatings, heavy duty maintenance coatings, high solids - low VOC coatings, alkyd, epoxy, RU primers - solvent based, water based epoxies, ballast coatings, marine coatings, offshore/onshore coatings, automotive OEM-intermediate coatings, refinish/car repari, commercial vehicles, freight container, powder coatings, yacht paints, gel coats, and can/coil/E-coat coatings. Vea Menos | Request Sample |
| Finntalc M15 | Elementis | Finntalc M15 is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 18% of the particle size <2 µm. It has applications in interior flat emulsion paints, exterior flat emulsion paints,...Vea Mas Finntalc M15 is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 18% of the particle size <2 µm. It has applications in interior flat emulsion paints, exterior flat emulsion paints, multi-purpose interior/exterior paints, flexible exterior wall paints, semi-gloss emulsion paints, outdoor wood paints, elastomeric coatings, silk and eggshell paints, general industrial protective coatings, heavy duty maintenance coatings, high solids-low VOC coatings, alkyd, epoxy, RU primers - solvent based, water based epoxies, ballast coatings, marine coatings, offshore/onshore coatings, automotive OEM-intermediate coatings, commercial vehicles, freight container, yacht paints, and gel coats. Vea Menos | Request Sample |
| Finntalc M20SL | Elementis | Finntalc M20SL is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 14% of the particle size <2 µm. It has applications in interior flat emulsion paints, exterior flat emulsion paint...Vea Mas Finntalc M20SL is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 14% of the particle size <2 µm. It has applications in interior flat emulsion paints, exterior flat emulsion paints, multi-purpose interior/exterior paints, flexible exterior wall paint, semi-gloss emulsion paints, outdoor wood paints, elastomeric coatings, and silk and eggshell paints Vea Menos | Request Sample |
| Finntalc M30 | Elementis | Finntalc M30 is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 10% of the particle size <2 µm. It has applications in interior flat emulsion paints, flexible exterior wall paint, ...Vea Mas Finntalc M30 is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 10% of the particle size <2 µm. It has applications in interior flat emulsion paints, flexible exterior wall paint, outdoor wood paints, wood primers, elastomeric coatings, textured finishes, silk and eggshell paints, general industrial protective coatins, heavy duty maintenance coatings, high solids-low VOC coatings,alkyd,epoxy, RU primers-solvent based, water based epoxies, ballast coatings, marine coatings, offshore/onshore coatings, automotive OEM-intermediate coatings, Freight container, and yacht paints. Vea Menos | Request Sample |
| Finntalc M30SL | Elementis | Finntalc M30SL is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 9% of the particle size <2 µm. It has applications in interior flat emulsion paints, flexible exterior wall paint,...Vea Mas Finntalc M30SL is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 9% of the particle size <2 µm. It has applications in interior flat emulsion paints, flexible exterior wall paint, outdoor wood paints, wood primers, elastomeric coatings, and textured finishes. Vea Menos | Request Sample |
| Finntalc M50 | Elementis | Finntalc M50 is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 7% of the particle size <2 µm. It has applications general industrial protective coatings, heavy duty maintenance co...Vea Mas Finntalc M50 is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 7% of the particle size <2 µm. It has applications general industrial protective coatings, heavy duty maintenance coatings, high solids-lo VOC water based epoxies, balast coatings, marine coatings, offshore/onshore coatings, electrodeposition primers, freight container, and solvent based primers. Vea Menos | Request Sample |
| Microtalc IT Extra | Elementis | Microtalc IT Extra offers the highest chemical purity and talc content, and has 52% of the particle size <2 µm. It has applications in exterior flat emulsion paints, mulit-purpose interior/exterior paints, semi-gloss emulsion paints, outdoor wood paints, ...Vea Mas Microtalc IT Extra offers the highest chemical purity and talc content, and has 52% of the particle size <2 µm. It has applications in exterior flat emulsion paints, mulit-purpose interior/exterior paints, semi-gloss emulsion paints, outdoor wood paints, alkyd topcoats, refinish/car repair, commercial vehicles, powder coatings, gel coats, and can/coil/E-coat coatings. Vea Menos | Request Sample |
| Plustalc H10 | Elementis | Plustalc H10 is very white and macrocrystalline with 45% of the particle size <2 µm. It is the choice for brightness and mechanical reinforcement. It has applications in general industrial protective coatings, solvent based primers, water based epoxies, a...Vea Mas Plustalc H10 is very white and macrocrystalline with 45% of the particle size <2 µm. It is the choice for brightness and mechanical reinforcement. It has applications in general industrial protective coatings, solvent based primers, water based epoxies, automotive OEM-intermediate coatings, refinish/car repair, commercial vehicles,powder coatings, yacht paints, gel coats, can/coil/E-coat coatings, interior/exterior flat emulsion paints, multi-purpose interior/exterior paints, Semi-gloss emulsion paints, wood primers, alkyd topcoats, silk and eggshell paints, general industrial protective coatings, solvent based primers, water based epoxies, automotive OEM-intermediate coatings, refinish/car repair, commercial vehicles, powder coatings, yacht paints, gel coats, and can/coil/E-coat coatings. Vea Menos | Request Sample |
| Plustalc H05 | Elementis | Plustalc H05 is very white and macrocrystalline with 51% of particle size <2 µm. It is the choice for brightness and mechanical reinforcement. It has applications in exterior flat emulsion paints, multi-purpose interior/exterior paints,semi-gloss emulsion...Vea Mas Plustalc H05 is very white and macrocrystalline with 51% of particle size <2 µm. It is the choice for brightness and mechanical reinforcement. It has applications in exterior flat emulsion paints, multi-purpose interior/exterior paints,semi-gloss emulsion paints, alkyd topcoats silk and eggshell paints, general industrial protective coatings, solvent based primers, water based epoxies, automotive OEM-intermediate coatings, refinish/car repair, commercial vehicles, powder coatings, yacht paints, gel coats, and can/coil/E-coat coatings. Vea Menos | Request Sample |
| Plustalc H30 | Elementis | Plustalc H30 is very white and macrocrystalline with 15% of the particle size <2 µm. It is the choice for brightness and mechanical reinforcement. It has applicatinos in general industrial protective coatings, heavy duty maintenance coatings, high solids-...Vea Mas Plustalc H30 is very white and macrocrystalline with 15% of the particle size <2 µm. It is the choice for brightness and mechanical reinforcement. It has applicatinos in general industrial protective coatings, heavy duty maintenance coatings, high solids-low VOC coatings, solvent based primers, water based epoxies, ballast coatings, marine coatings, offshore/onshore coatings, automotive OEM-intermediate coatings, freight container, yacht paint, interior flat emulsion paints, flexible exterior wall paint, outdoor wood paints, wood primers, elastomeric coatings, textured finishes, and silk and eggshell paints. Vea Menos | Request Sample |
| Plustalc H15 | Elementis | Plustalc H15 is very white and macrocrystalline with 20% of the particle size <2 µm. It is the choice for brightness and mechanical reinforcement. It has a wide variety of industrial coating applications and decorative paint applications. | Request Sample |
| Plustalc D30E | Elementis | Plustalc D30E is very white and macrocrystalline with 10% of the particle size <2 µm. It is the choice for brightness and mechanical reinforcement. It has applications in general industrial protective coatings, heavy duty maintenance coatings, high solids...Vea Mas Plustalc D30E is very white and macrocrystalline with 10% of the particle size <2 µm. It is the choice for brightness and mechanical reinforcement. It has applications in general industrial protective coatings, heavy duty maintenance coatings, high solids-low VOC coatings, solvent based primers, water based epoxies, ballast coatings, marine coatings, offshore/onshore coatings, automotive OEM-intermediate coatings, commercial vehicles, freight container, yacht paints, exterior flat emulsion paints, flexible exterior wall paint, outdoor wood paints, wood primers, elastomeric coatings, and textured finishes. Vea Menos | Request Sample |
| Jetfine® 1 | Imerys Performance Additives | De alta Poliuretano reza, talco laminar usado en poliolefinas para aumentar la rigidez y elevar la temperatura de deflexión del calor (HDT). | |
| Prizmalite P2011SL | Prizmalite Industries Inc. | Prizmalite P2011SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 3 to 6 microns. Prizmalite P2011SL can be used in solvent and water-based paint applications. | |
| Prizmalite P2050SL | Prizmalite Industries Inc. | Prizmalite P2050SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 35 to 45 microns. Prizmalite P2050SL can be used in textile and vinyl coatings, solvent and water-based coating...Vea Mas Prizmalite P2050SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 35 to 45 microns. Prizmalite P2050SL can be used in textile and vinyl coatings, solvent and water-based coatings, and tactile coatings. Vea Menos | |
| Prizmalite P2075SL | Prizmalite Industries Inc. | Prizmalite P2075SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 65 to 75 microns. Prizmalite P2075SL can be used in textile and vinyl coatings, solvent and water-based coating...Vea Mas Prizmalite P2075SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 65 to 75 microns. Prizmalite P2075SL can be used in textile and vinyl coatings, solvent and water-based coatings, and tactile coatings. Vea Menos | |
| Prizmalite P2453BTA | Prizmalite Industries Inc. | Prizmalite P2453BTA are hemispherically aluminum coated barium titanate glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 40 to 50 microns. Prizmalite P2453BTA can be used in textile and vinyl coating...Vea Mas Prizmalite P2453BTA are hemispherically aluminum coated barium titanate glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 40 to 50 microns. Prizmalite P2453BTA can be used in textile and vinyl coatings, solvent and water-based coatings, reflective plastisol inks, tactile coatings, and reflective powder coatings. Vea Menos | |
| TALCRON® MP 10-52 | Specialty Minerals | TALCRON® MP 10-52 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1 micron and an oil absorption of 55. TALCRON® MP 10-52 is used in paint, coatings, adhesives, and sea...Vea Mas TALCRON® MP 10-52 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1 micron and an oil absorption of 55. TALCRON® MP 10-52 is used in paint, coatings, adhesives, and sealants. Vea Menos | |
| TALCRON® MP 12-50 | Specialty Minerals | TALCRON® MP 12-50 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1.2 microns and an oil absorption of 53. TALCRON® MP 12-50 is used in paint, coatings, adhesives, and ...Vea Mas TALCRON® MP 12-50 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1.2 microns and an oil absorption of 53. TALCRON® MP 12-50 is used in paint, coatings, adhesives, and sealants. Vea Menos | |
| TALCRON® MP 15-38 | Specialty Minerals | TALCRON® MP 15-38 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 2 microns and an oil absorption of 42. TALCRON® MP 15-38 is used in paint, coatings, adhesives, and se...Vea Mas TALCRON® MP 15-38 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 2 microns and an oil absorption of 42. TALCRON® MP 15-38 is used in paint, coatings, adhesives, and sealants. Vea Menos | |
| TALCRON® MP 30-36 | Specialty Minerals | TALCRON® MP 30-36 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 3 microns and an oil absorption of 34. TALCRON® MP 30-36 is used in paint, coatings, adhesives, and se...Vea Mas TALCRON® MP 30-36 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 3 microns and an oil absorption of 34. TALCRON® MP 30-36 is used in paint, coatings, adhesives, and sealants. Vea Menos | |
| TALCRON® MP 40-27 | Specialty Minerals | TALCRON® MP 40-27 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 4 microns and an oil absorption of 30. TALCRON® MP 40-27 is used in paint, coatings, adhesives, and se...Vea Mas TALCRON® MP 40-27 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 4 microns and an oil absorption of 30. TALCRON® MP 40-27 is used in paint, coatings, adhesives, and sealants. Vea Menos | |
| TALCRON® MP 44-26 | Specialty Minerals | TALCRON® MP 44-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 5 microns and an oil absorption of 28. TALCRON® MP 44-26 is used in paint, coatings, adhesives, and se...Vea Mas TALCRON® MP 44-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 5 microns and an oil absorption of 28. TALCRON® MP 44-26 is used in paint, coatings, adhesives, and sealants. Vea Menos | |
| TALCRON® MP 45-26 | Specialty Minerals | TALCRON® MP 45-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 8 microns and an oil absorption of 26. TALCRON® MP 45-26 is used in paint, coatings, adhesives, and se...Vea Mas TALCRON® MP 45-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 8 microns and an oil absorption of 26. TALCRON® MP 45-26 is used in paint, coatings, adhesives, and sealants. Vea Menos | |
| SERICRON® 6M | Specialty Minerals | SERICRON® 6M is a talc product which has a high chemical resistance. This product has an oil absorption of 39 and a pH value of 8.8. SERICRON® 6M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
| SERICRON® 5M | Specialty Minerals | SERICRON® 5M is a talc product which has a high chemical resistance. This product has an oil absorption of 36 and a density of 2.8. SERICRON® 5M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
| SERICRON® 4M | Specialty Minerals | SERICRON® 4M is a talc product which has a high chemical resistance. This product has an oil absorption of 30 and a median particle size of 4 microns. SERICRON® 4M is used in construction products such as joint compound, adhesives, sealants, putties, and ...Vea Mas SERICRON® 4M is a talc product which has a high chemical resistance. This product has an oil absorption of 30 and a median particle size of 4 microns. SERICRON® 4M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. Vea Menos | |
| SERICRON® 3M | Specialty Minerals | SERICRON® 3M is a talc product which has a high chemical resistance. This product has an oil absorption of 24 and a median particle size of 8 microns. SERICRON® 3M is used in construction products such as joint compound, adhesives, sealants, putties, and ...Vea Mas SERICRON® 3M is a talc product which has a high chemical resistance. This product has an oil absorption of 24 and a median particle size of 8 microns. SERICRON® 3M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. Vea Menos | |
| SERICRON® 2M | Specialty Minerals | SERICRON® 2M is a talc product which has a high chemical resistance. This product has an oil absorption of 22 and a bulking value of 23.3. SERICRON® 2M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
| MICROTALC ® 50-26 | Specialty Minerals | MICROTALC® 50-26 is a general purpose talc product which has a median particle size of 8 microns. This product has a pH value of 8.8 and a density of 2.8. MICROTALC® 50-26 is used in sealants, caulks, joint compounds, spackles, and texture coats. | |
| MICROTALC ® 70-22 | Specialty Minerals | MICROTALC ® 70-22 is a general purpose talc product which has a median particle size of 7 microns. This product has a dry brightness or between 76 and 85 and a bulk density of 27 pounds/ft2. MICROTALC ® 70-22 is used in sealants, caulks, joint compounds, ...Vea Mas MICROTALC ® 70-22 is a general purpose talc product which has a median particle size of 7 microns. This product has a dry brightness or between 76 and 85 and a bulk density of 27 pounds/ft2. MICROTALC ® 70-22 is used in sealants, caulks, joint compounds, spackles, and texture coats. Vea Menos | |
| FINNTALC M30 | Elementis | FINNTALC M30 is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product s...Vea Mas FINNTALC M30 is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| FINNTALC M30LV | Elementis | FINNTALC M30LV is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product...Vea Mas FINNTALC M30LV is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. Vea Menos | Request Sample |
| Talkron® CLASSIC | Provencale S.A. | Talkron® CLASSIC, in the form of a white powder, is a mix of talc and chlorite that has a lamellar structure. This product can be used in industrial, anti-corrosion, and decorative paints. It is indicated for systems where a low level of whiteness is re...Vea Mas Talkron® CLASSIC, in the form of a white powder, is a mix of talc and chlorite that has a lamellar structure. This product can be used in industrial, anti-corrosion, and decorative paints. It is indicated for systems where a low level of whiteness is required, and its properties allow the user to regulate and adjust the gloss levels when required. Vea Menos | |
| Talkron® NATUR | Provencale S.A. | Talkron® NATUR, in the form of a white powder, is a talc of high purity that has a lamellar structure and good whiteness. This product can be used in decorative and industrial paints and in plastics. Its platy particles create a barrier effect in interi...Vea Mas Talkron® NATUR, in the form of a white powder, is a talc of high purity that has a lamellar structure and good whiteness. This product can be used in decorative and industrial paints and in plastics. Its platy particles create a barrier effect in interior or exterior coatings. Vea Menos | |
| Talkron® ZERO | Provencale S.A. | Talkron® ZERO, in the form of a white powder, is a high-purity talc with a lamellar structure and a good grade of whiteness. This product can be used in high-solids coatings. It is a de-dusted talc with low oil absorption and low surface area. It has a...Vea Mas Talkron® ZERO, in the form of a white powder, is a high-purity talc with a lamellar structure and a good grade of whiteness. This product can be used in high-solids coatings. It is a de-dusted talc with low oil absorption and low surface area. It has anti-corrosive, hydrophobic, and weather-resistant characteristics. Vea Menos | |
| Talkron® PURE | Provencale S.A. | Talkron® PURE, in the form of a white powder, is a high-purity talc with good whiteness. This product can be used in hydrophobic indoor and outdoor coatings. It confers dry-hiding properties and can act as a partial replacement for titanium dioxide. | |
| Talkron® STYL | Provencale S.A. | Talkron® STYL, in the form of a white powder, is a blend of talc, calcium carbonate, and magnesium. This product has a mostly lamellar structure, and can be used in water-based coatings. Its different particle sizes allow the user to regulate and adjust...Vea Mas Talkron® STYL, in the form of a white powder, is a blend of talc, calcium carbonate, and magnesium. This product has a mostly lamellar structure, and can be used in water-based coatings. Its different particle sizes allow the user to regulate and adjust the gloss and whiteness of the end product. Vea Menos | |
| XYNFW | Xinyu South Wollastonite Co., Ltd. | XYNFW is a metasilicate calcium mineral used mainly in the ceramic industry. Additional applications include metallurgical protection slag and coatings, welding rod coatings, asbestos substitutes, and grinding adhesives. This product can also be used as a...Vea Mas XYNFW is a metasilicate calcium mineral used mainly in the ceramic industry. Additional applications include metallurgical protection slag and coatings, welding rod coatings, asbestos substitutes, and grinding adhesives. This product can also be used as an additive for producing white cement. Vea Menos | |
| XYNFW-TA | Xinyu South Wollastonite Co., Ltd. | XYNFW-TA is a metasilicate calcium mineral used as an additive for ceramic glazing. This product is well suited for the production of durable high strength ceramics. | |
| XYNFW-sw | Xinyu South Wollastonite Co., Ltd. | XYNFW-sw is a metasilicate calcium mineral fiber filling used in plastic, rubber, adhesives, paint, printing ink and paper. This product is well suited for use in the production of prime coats, intermediate coats, oil-based coatings, road sign coatings, s...Vea Mas XYNFW-sw is a metasilicate calcium mineral fiber filling used in plastic, rubber, adhesives, paint, printing ink and paper. This product is well suited for use in the production of prime coats, intermediate coats, oil-based coatings, road sign coatings, sound insulation coatings and fireproof coatings. Vea Menos | |
| Talc Powder ET1 | Green Egypt Group | Talc Powder ET1 is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetics...Vea Mas Talc Powder ET1 is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetics. Talc Powder ET1 has a median particle size of 3.96 microns and a surface area of 1.55 m2/g. Vea Menos | |
| Talc Powder ET4 | Green Egypt Group | Talc Powder ET4 is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetics...Vea Mas Talc Powder ET4 is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetics. Talc Powder ET4 has a median particle size of 5.0 microns and a surface area of 1.45 m2/g. Vea Menos | |
| Talc Powder ET2 | Green Egypt Group | Talc Powder ET2 is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetics...Vea Mas Talc Powder ET2 is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetics. Talc Powder ET2 has a median particle size of 4.42 microns and a surface area of 1.50 m2/g. Vea Menos | |
| Talc Powder ET3 | Green Egypt Group | Talc Powder ET3 is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetics...Vea Mas Talc Powder ET3 is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetics. Talc Powder ET3 has a median particle size of 4.72 microns and a surface area of 1.45 m2/g. Vea Menos | |
| Talc Powder ET5 | Green Egypt Group | Talc Powder ET5 is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetics...Vea Mas Talc Powder ET5 is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetics. Talc Powder ET5 has a median particle size of 5.30 microns and a surface area of 1.37 m2/g. Vea Menos | |
| Talc Powder ET5M | Green Egypt Group | Talc Powder ET5M is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetic...Vea Mas Talc Powder ET5M is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetics. Talc Powder ET5M has a median particle size of 3.30 microns and a surface area of 1.61 m2/g. Vea Menos | |
| Talc Powder ET7 | Green Egypt Group | Talc Powder ET7 is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetics...Vea Mas Talc Powder ET7 is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetics. Talc Powder ET7 has a median particle size of 6.61 microns and a surface area of 1.11 m2/g. Vea Menos | |
| Talc Powder ET10 | Green Egypt Group | Talc Powder ET10 is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetic...Vea Mas Talc Powder ET10 is a nearly pure talc with a minor amount of chlorite and carbonte that is asbestiform mineral free. This product is used in the creation of applications such as paints, ceramics, coatings, cables, plastics, paper, fertilizer and cosmetics. Talc Powder ET10 has a median particle size of 8.80 microns and a surface area of 0.90 m2/g. Vea Menos | |
| Finntalc M50LV | Elementis | Finntalc M50LV is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product...Vea Mas Finntalc M50LV is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. It is ideal for use in paint and coatings applications. Vea Menos | Request Sample |
| Finntalc M65LV | Elementis | Finntalc M65LV is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product...Vea Mas Finntalc M65LV is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. It is ideal for use in the paint and coatings industry. Vea Menos | Request Sample |
| Plustalc H50 | Elementis | Plustalc H50 is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Plustalc grades have a low iron content. Plustalc is suitable for such applications where a higher brightness is required. It is ideal for use in paint and coatings ap...Vea Mas Plustalc H50 is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Plustalc grades have a low iron content. Plustalc is suitable for such applications where a higher brightness is required. It is ideal for use in paint and coatings applications. Vea Menos | Request Sample |
| Finntalc M15SL | Elementis | Finntalc M15SL is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product...Vea Mas Finntalc M15SL is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. It is ideal for use in paint & coatings applications. Vea Menos | Request Sample |
| Plustalc H25 | Elementis | Plustalc H25 is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Plustalc grades have a low iron content. Plustalc is suitable for such applications where a higher brightness is required. It is ideal for use in paint & coatings. | Request Sample |
| Kamin® 2000C | KaMin Solutions | Un tensioactivador único que proporciona beneficios de rendimiento multifuncional en la actividad superficial, la solvencia, la afinidad con aniónicos y capacidad complejante. Es útil como un solvente para los polímeros y las sustancias hidrofóbicas, as...Vea Mas Un tensioactivador único que proporciona beneficios de rendimiento multifuncional en la actividad superficial, la solvencia, la afinidad con aniónicos y capacidad complejante. Es útil como un solvente para los polímeros y las sustancias hidrofóbicas, así como un ingrediente en adhesivos sensibles a la presión, y es particularmente efectivo cuando se acoplan solventes para las fragancias. Vea Menos | Request Sample |
| Kamin® 611 | KaMin Solutions | Éste es el brillo más alto de KaMin, tamaño de la partícula más fina, arcilla calcinada del caolín. Tiene alta absorción de aceite y alta demanda de agua. Se incorpora fácilmente en solventes y en revestimientos y tintas trasmitidos por agua, donde impar...Vea Mas Éste es el brillo más alto de KaMin, tamaño de la partícula más fina, arcilla calcinada del caolín. Tiene alta absorción de aceite y alta demanda de agua. Se incorpora fácilmente en solventes y en revestimientos y tintas trasmitidos por agua, donde imparte control del brillo y la máxima extensión TiO2, fuerza del tinte, y brillo máximos (blancura). Uso típico: tintas y revestimientos arquitectónicas planas. Vea Menos | Request Sample |
