| STRUKTOSIL 45 MAM | Hoffmann Mineral | STRUKTOSIL 45 MAM is a special activated talc, produced by modifying the surface with a methacrylic functional group. The process parameters are selected in such a way that, on the one hand, anchoring to the surface takes place and, on the other hand, rel...Vea Mas STRUKTOSIL 45 MAM is a special activated talc, produced by modifying the surface with a methacrylic functional group. The process parameters are selected in such a way that, on the one hand, anchoring to the surface takes place and, on the other hand, released by-products are removed as far as possible during production. Undesirable byproducts, such as occur during in situ mixings (i.e. during the direct addition of the additives), are therefore practically completely prevented and the material improves its hydrophobic properties. Vea Menos | |
| POLYCAT® SA 1/10 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 1/10 is an acid-free heat activated catalyst that provides excellent back-end cure. Can provide an extended pot life. It stays liquid at low temperature. | |
| BYK-3756 | BYK | BYK-3756 is a silicone-containing surface additive with extended food contact compliance for solvent-borne, solvent-free, and aqueous coating systems with a strong reduction in surface tension. Excellent substrate wetting prevents cratering and increases ...Vea Mas BYK-3756 is a silicone-containing surface additive with extended food contact compliance for solvent-borne, solvent-free, and aqueous coating systems with a strong reduction in surface tension. Excellent substrate wetting prevents cratering and increases surface slip. Vea Menos | |
| POLYCAT® SA 4 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 4 is a heat activated catalyst that provides excellent back-end cure. Can provide an extended pot life. It stays liquid at low temperature. Is has higher de-blocking temperature and longer pot life time than POLYCAT® SA 1/10. | |
| AM-636 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AM-636, in the form of a clear liquid, is a unique isocyanate based cross-linker disperse-able in water for the use with acrylic and polyurethane resins. It improves the solvent resistance, water resistance, toughness, block resistance, abrasion resistanc...Vea Mas AM-636, in the form of a clear liquid, is a unique isocyanate based cross-linker disperse-able in water for the use with acrylic and polyurethane resins. It improves the solvent resistance, water resistance, toughness, block resistance, abrasion resistance, and flexibility. AM-636 is solvent free and features a low viscosity for ease of integration into coating. Vea Menos | |
| DETERSOL EN 45 | Chemipol | DETERSOL EN 45 is a wetting agent of anionic surfactants, specifically developed for easing the moistening of aqueous paints on difficult surfaces, either it is due to its low porosity or its low surface tension. Suitable for the most habitual aqueous pai...Vea Mas DETERSOL EN 45 is a wetting agent of anionic surfactants, specifically developed for easing the moistening of aqueous paints on difficult surfaces, either it is due to its low porosity or its low surface tension. Suitable for the most habitual aqueous paints raw material. It does not modify the scrub resistance, since it generates insoluble calcium salts during the drying process. It has been proven to be highly effective when used in paints that will be applied on difficult wetting surfaces (plasters, pearlite). It extends the open time of the product, neutralizing the repellent effect of some plaster additives. It does not affect the float resistance. The effectiveness within a broad range of pH. Vea Menos | Request Sample |
| Curing Agent D | Ichemco | Curing Agent D is a diisocyanate in a liquid solution form. This product has a total solids content of 64-66%. Curing Agent D is most commonly used as a curing and cross-linking agent in coating, adhesive, primer, and paint applications. | |
| Curing Agent W3 | Ichemco | Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather fi...Vea Mas Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather finishing applications. Vea Menos | |
| 4HBA | Kowa Europe GmbH | 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coat...Vea Mas 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coatings, water borne coatings, powder coatings, adhesives, urethane finishes, and UV inkjet ink. Vea Menos | Request Sample |
