| ORGASOL® 2002 ES5 NAT 3 | Arkema | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...Vea Mas ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. Vea Menos | Request Sample |
| ORGASOL® 2002 ES6 NAT 3 | Arkema | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...Vea Mas ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. Vea Menos | Request Sample |
| Permanent Yellow HR | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Permanent Yellow HR is a semi-transparent yellow pigment with good resistance to both light and solvents. This product has a density of 1.7 g/cm3 and a pH value of 6.0-7.0. It is commonly used in industrial paints, decorative paints, coil coatings, solven...Vea Mas Permanent Yellow HR is a semi-transparent yellow pigment with good resistance to both light and solvents. This product has a density of 1.7 g/cm3 and a pH value of 6.0-7.0. It is commonly used in industrial paints, decorative paints, coil coatings, solvent-based inks, and water-based inks. Vea Menos | |
| Polurene LP 1810 | S.A.P.I.C.I. SpA | Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and...Vea Mas Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and coil coatings. Vea Menos | |
| Resiflow® L-210 | Estron Chemical, Inc. | Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...Vea Mas Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. Vea Menos | |
| Resiflow® L-3075 | Estron Chemical, Inc. | Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellen...Vea Mas Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellent air release, improved film characteristics, and resistance to dirt-pick up. Vea Menos | |
| Resiflow® L-37 | Estron Chemical, Inc. | Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and...Vea Mas Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and is especially effective in urethane acrylates, epoxy acrylates, polyesters, and epoxies. Recommended level of usage is 0.1%-0.5% based on solids. Resiflow® L-37 can be cut in various reactive diluents, aromatic and aliphatic hydrocarbons, esters, ketones, or alcohols for easy incorporation into the formula. Vea Menos | |
| Resiflow® L-45D | Estron Chemical, Inc. | Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and or...Vea Mas Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel. Resiflow® L-45D can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. Vea Menos | |
| Resiflow® L5 | Estron Chemical, Inc. | Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel,...Vea Mas Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel, and can improve the flexibility of coatings. Resiflow®L-5 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. Vea Menos | |
| Resiflow® LF | Estron Chemical, Inc. | Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow...Vea Mas Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow® LF can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. Vea Menos | |
| Resiflow® LH-241 | Estron Chemical, Inc. | Resiflow® LH-241 is a specialty acrylic flow control additive that is in the reactive family of Resiflow® products. Typical dosage of Resiflow LH-241 is from 0.2 - 2%. Resiflow® LH-241 is a viscous liquid additive that can be incorporated into a variety o...Vea Mas Resiflow® LH-241 is a specialty acrylic flow control additive that is in the reactive family of Resiflow® products. Typical dosage of Resiflow LH-241 is from 0.2 - 2%. Resiflow® LH-241 is a viscous liquid additive that can be incorporated into a variety of binder chemistries to promote smoothness and gloss. Resiflow® LH-241 is well suited for coil coatings and clearcoats. Vea Menos | |
| Resiflow® LV | Estron Chemical, Inc. | Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as...Vea Mas Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® LV has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. Vea Menos | |
| Resiflow® LV-67 | Estron Chemical, Inc. | Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1....Vea Mas Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1.5%, and as with any raw material, laboratory evaluation is recommended to determine the best processing method and the optimum concentration of the additive. Vea Menos | |
| Resiflow® S | Estron Chemical, Inc. | Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder...Vea Mas Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder content. Resiflow® S is suitable for solvent borne coatings including primers and coil coatings. Vea Menos | |
| RILSAN® D30 NAT | Arkema | RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...Vea Mas RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 21-27µm. Vea Menos | Request Sample |
| RILSAN® D40 NAT | Arkema | RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...Vea Mas RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 27-31µm. Vea Menos | Request Sample |
| RILSAN® D50 NAT | Arkema | RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...Vea Mas RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 40-46µm. Vea Menos | Request Sample |
| RILSAN® D60 NAT | Arkema | RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...Vea Mas RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 43-55µm. Vea Menos | Request Sample |
| RILSAN® D80 NAT | Arkema | RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...Vea Mas RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 95-105µm. Vea Menos | Request Sample |
| TEGO® AddBond 2220 ND | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond 2220 improves flexibility and adhesion of solventborne coatings. This soft polyester shows very good compatibility in non-polar formulations. | Request Sample |
| TEGO® AddBond HS | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond HS improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings. | Request Sample |
| TEGO® AddBond HS MPA | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond HS improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings. | Request Sample |
| TEGO® AddBond LP 1600 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LP 1600 is a solvent-free adhesion resin. It improves intercoat adhesion, increases the solids content, improves gloss, and offers wide solubility and compatibility. This product is recommended for can and coil coatings and industrial coatin...Vea Mas TEGO® AddBond LP 1600 is a solvent-free adhesion resin. It improves intercoat adhesion, increases the solids content, improves gloss, and offers wide solubility and compatibility. This product is recommended for can and coil coatings and industrial coatings. Vea Menos | Request Sample |
| TEGO® AddBond LP 1611 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LP 1611 is a solvent-free adhesion resin. It improves the intercoat adhesion, corrosion protection, and gloss. This product offers excellent adhesion improvement on aluminium, steel and galvanized steel, as well as plastics, PVC, and ABS. It...Vea Mas TEGO® AddBond LP 1611 is a solvent-free adhesion resin. It improves the intercoat adhesion, corrosion protection, and gloss. This product offers excellent adhesion improvement on aluminium, steel and galvanized steel, as well as plastics, PVC, and ABS. It is recommended for can and coil coatings, industrial coatings, and 2-pack coatings. Vea Menos | Request Sample |
| TEGO® AddBond LTW | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LTW improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. | Request Sample |
| TEGO® AddBond LTW-B | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LTW-B improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. | Request Sample |
