| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...Vea Mas Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. Vea Menos | |
| FLYTAC 103-85 | Guangzhou Flying Dragon Chemical Ltd. | A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS,...Vea Mas A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Vea Menos | |
| FLYTAC 120-100W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...Vea Mas A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. Vea Menos | |
| FLYTAC 120-90W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...Vea Mas A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. Vea Menos | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...Vea Mas Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. Vea Menos | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...Vea Mas Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. Vea Menos | |
| GLYCEROL ESTER OF GUM ROSIN 85 (PM-003) | PT. NASCO | GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture variou...Vea Mas GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture various adhesives, and primarily as a tackifier in hot melt adhesives (HMA). It has little odor and is light in color. Vea Menos | |
| GRANOLITE G | DRT | This is a light-colored and deodorised gum rosin esterified with glycerol. | |
| GRANOLITE G 105 | DRT | Gum rosin esterified with glycerol, GRANOLITE G 105 is a light-colored and deodorised resin suitable in various adhesive applications. | |
| Gum Rosin | LUKEM D.O.O. | Gum Rosin is a light yellow, transparent solid with a softening point of 76ºC. This product is used as a raw material in coatings and synthetic resins. | |
| GUM ROSIN INDONESIAN (PM-002) | PT. NASCO | GUM ROSIN INDONESIAN is made up of various resin acids such as Abietic, Palustric, Isopimaric, Mercusic Acids. | |
| Gum Rosin [WW/WG Grade] | Industrial Oleochemical Products | Gum Rosin [WW/WG Grade] is a standard grade gum rosin in a nugget-sized particle form. This product is most commonly used in hot-melt and pressure-sensitive adhesive applications. | |
| MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 (PM-004) | PT. NASCO | MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity i...Vea Mas MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity in solutions used in formulating Nitrocellulose based formulations. It exhibits good hardness, high gloss and vest fest drying speed. Vea Menos | |
| PENTAERYTHRITOL ESTER OF GUM ROSIN 100 (PM-005) | PT. NASCO | PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insol...Vea Mas PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insoluble in methanol, ethanol, isopropanol, and water. It is well suited for the adhesive industry due to is weak odor, excellent heat stability and great adhesion properties and also it’s compatibility with many kinds of polymers. Vea Menos | |
| Polimelt P88 | Respol Resinas | Polimelt P88 is a tail oil rosin ester that can be used in adhesive formulations. This product has a softening point between 89-90 degrees Celsius and is designed for formulations with increased tackifying requirements. Its acid value is less than 10 mg...Vea Mas Polimelt P88 is a tail oil rosin ester that can be used in adhesive formulations. This product has a softening point between 89-90 degrees Celsius and is designed for formulations with increased tackifying requirements. Its acid value is less than 10 mg of potassium hydroxide per gram. Vea Menos | |
| Tergum T100 | Respol Resinas | Tergum T100 is a gum rosin that has been esterified with pentaerythritol that can be used in hot melt adhesives. This product has thermal stability and resistance to oxidative degradation in mixtures of elastomers and paraffins, and will provide better c...Vea Mas Tergum T100 is a gum rosin that has been esterified with pentaerythritol that can be used in hot melt adhesives. This product has thermal stability and resistance to oxidative degradation in mixtures of elastomers and paraffins, and will provide better colour and higher stability. Its softening point ranges between 92-98 degrees Celsius and its acid value is less than 20 mg of potassium hydroxide per gram. Vea Menos | |
| Tergum T103 | Respol Resinas | Tergum T103 is a gum rosin that has been esterified with pentaerythritol that can be used in hot melt adhesives. This product has thermal stability and resistance to oxidative degradation in mixtures of elastomers and paraffins, and will provide better c...Vea Mas Tergum T103 is a gum rosin that has been esterified with pentaerythritol that can be used in hot melt adhesives. This product has thermal stability and resistance to oxidative degradation in mixtures of elastomers and paraffins, and will provide better colour and higher stability. Its softening point ranges between 98-105 degrees Celsius and its acid value is less than 20 mg of potassium hydroxide per gram. Vea Menos | |
| Tergum T120 | Respol Resinas | Tergum T120 is a gum rosin ester that can be used in hot melt adhesives and pressure-sensitive adhesives. This product is compatible with most elastomers, waxes, paraffin waxes and resins used in the adhesive industry. It provides high thermal stability...Vea Mas Tergum T120 is a gum rosin ester that can be used in hot melt adhesives and pressure-sensitive adhesives. This product is compatible with most elastomers, waxes, paraffin waxes and resins used in the adhesive industry. It provides high thermal stability and resistance to oxidative degradation. Its softening point ranges between 114-120 degrees Celsius and its acid value is less than 15 mg of potassium hydroxide per gram. Vea Menos | |
| Tergum T122 | Respol Resinas | Tergum T122 is a gum rosin ester that can be used in hot melt adhesives and pressure-sensitive adhesives. This product is compatible with most elastomers, waxes, paraffin waxes and resins used in the adhesive industry. It provides high thermal stability...Vea Mas Tergum T122 is a gum rosin ester that can be used in hot melt adhesives and pressure-sensitive adhesives. This product is compatible with most elastomers, waxes, paraffin waxes and resins used in the adhesive industry. It provides high thermal stability and resistance to oxidative degradation. Its softening point ranges between 118-124 degrees Celsius and its acid value is less than 15 mg of potassium hydroxide per gram. Vea Menos | |
| Tergum T19 | Respol Resinas | Tergum T19 is a gum rosin that does not crystallize. This product can be used as a tackifier for natural or synthetic adhesives. Its softening point ranges between 85-95 degrees Celsius and its acid value ranges between 135-155 mg of potassium hydroxide...Vea Mas Tergum T19 is a gum rosin that does not crystallize. This product can be used as a tackifier for natural or synthetic adhesives. Its softening point ranges between 85-95 degrees Celsius and its acid value ranges between 135-155 mg of potassium hydroxide per gram. Vea Menos | |
| Tergum T385 | Respol Resinas | Tergum T385 is a gum rosin that has been esterified with glycerol. This product can be used in adhesive formulations that require increased tack. Its softening point ranges between 80-86 degrees Celsius and its acid value is less than 12 mg of potassium...Vea Mas Tergum T385 is a gum rosin that has been esterified with glycerol. This product can be used in adhesive formulations that require increased tack. Its softening point ranges between 80-86 degrees Celsius and its acid value is less than 12 mg of potassium hydroxide per gram. Vea Menos | |
| Tergum T39 | Respol Resinas | Tergum T39 is a liquid gum rosin ester that can be used as a viscosity regulator and a tack promoter in acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 20 degrees Celsius ranges between 300-500 and its acid value is...Vea Mas Tergum T39 is a liquid gum rosin ester that can be used as a viscosity regulator and a tack promoter in acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 20 degrees Celsius ranges between 300-500 and its acid value is less than 20 mg of potassium hydroxide per gram. Vea Menos | |
| Tergum T390 | Respol Resinas | Tergum T390 is a gum rosin that has been esterified with glycerol. This product can be used in hot-melt adhesive formulations. It increases tack while maintaining thermal stability and resistance to oxidative degradation. Its softening point ranges bet...Vea Mas Tergum T390 is a gum rosin that has been esterified with glycerol. This product can be used in hot-melt adhesive formulations. It increases tack while maintaining thermal stability and resistance to oxidative degradation. Its softening point ranges between 85-91 degrees Celsius and its acid value is less than 10 mg of potassium hydroxide per gram. Vea Menos | |
| Tergum T45 | Respol Resinas | Tergum T45 is a viscous liquid rosin ester that can be used as a tack promoter for acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 35 degrees Celsius ranges between 400-500 and its acid value is less than 15 mg of p...Vea Mas Tergum T45 is a viscous liquid rosin ester that can be used as a tack promoter for acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 35 degrees Celsius ranges between 400-500 and its acid value is less than 15 mg of potassium hydroxide per gram. Vea Menos | |
| Tergum T459 | Respol Resinas | Tergum T459 is a gum rosin ester. This product is soluble in aliphatic solvents and allows for the production of higher-solid content adhesives. Its softening point ranges between 97-103 degrees Celsius and its acid value is less than 10 mg of potassium...Vea Mas Tergum T459 is a gum rosin ester. This product is soluble in aliphatic solvents and allows for the production of higher-solid content adhesives. Its softening point ranges between 97-103 degrees Celsius and its acid value is less than 10 mg of potassium hydroxide per gram. Vea Menos | |
| Tergum T47 | Respol Resinas | Tergum T47 is a pasty liquid rosin ester that can be used as a viscosity regulator and tack promoter in acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 50 degrees Celsius ranges between 230-280 degrees Celsius and i...Vea Mas Tergum T47 is a pasty liquid rosin ester that can be used as a viscosity regulator and tack promoter in acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 50 degrees Celsius ranges between 230-280 degrees Celsius and its acid value is less than 15 mg of potassium hydroxide per gram. Vea Menos | |
| Tergum T49 | Respol Resinas | Tergum T49 is a pasty liquid rosin ester that can be used as a viscosity regulator and tack promoter for acrylic dispersion adhesives and natural rubber-based adhesives. This product's poise viscosity at 50 degrees Celsius ranges between 380-420 and its ...Vea Mas Tergum T49 is a pasty liquid rosin ester that can be used as a viscosity regulator and tack promoter for acrylic dispersion adhesives and natural rubber-based adhesives. This product's poise viscosity at 50 degrees Celsius ranges between 380-420 and its acid value is less than 15 mg of potassium hydroxide per gram. Vea Menos | |
| TURPENTINE OIL INDONESIA (PM-001) | PT. NASCO | TURPENTINE OIL INDONESIA is a colorless to pale yellow, liquid of Pinus merkusii (Sumatran Pine). |
