| Tackwhite AP 5 | Ichemco | Tackwhite AP 5 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 8 cm, and a peel of 180 g/in. Tackwhite AP 5 is most commonly used in the production of removable PSA tapes with low peel adh...Vea Mas Tackwhite AP 5 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 8 cm, and a peel of 180 g/in. Tackwhite AP 5 is most commonly used in the production of removable PSA tapes with low peel adhesion. Vea Menos | |
| Tackwhite AP 5 M | Ichemco | Tackwhite AP 5 M is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50%, a tack of 6-10 cm, and a peel of 300-600 g/in. Tackwhite AP 5 M is most commonly used in food-grade removable label and removable PSA...Vea Mas Tackwhite AP 5 M is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50%, a tack of 6-10 cm, and a peel of 300-600 g/in. Tackwhite AP 5 M is most commonly used in food-grade removable label and removable PSA tape with low peel adhesion production applications. Vea Menos | |
| Tackwhite AR 35 | Ichemco | Tackwhite AR 35 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 51-53% as a Brookfield viscosity at 25°C of 200-300 mPa.s. Tackwhite AR 35 is most commonly used in removable PVC, PE, and BOPP label producti...Vea Mas Tackwhite AR 35 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 51-53% as a Brookfield viscosity at 25°C of 200-300 mPa.s. Tackwhite AR 35 is most commonly used in removable PVC, PE, and BOPP label production applications. Vea Menos | |
| Tackwhite AR 51 (V2) | Ichemco | Tackwhite AR 51 (V2) is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite AR 51 (V2) is most commonly used in removable plastic and pape...Vea Mas Tackwhite AR 51 (V2) is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite AR 51 (V2) is most commonly used in removable plastic and paper label production applications. Vea Menos | |
| Tackwhite CR 72 HV | Ichemco | Tackwhite CR 72 HV is a low Tg (-58°C) pure Acrylic polymer emulsion that forms clear, elastic, tacky films when dried. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 18,000-25,000. Tackwhite CR 72 HV is most com...Vea Mas Tackwhite CR 72 HV is a low Tg (-58°C) pure Acrylic polymer emulsion that forms clear, elastic, tacky films when dried. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 18,000-25,000. Tackwhite CR 72 HV is most commonly used in the production of pressure sensitive adhesives made for deep freeze applications. Vea Menos | |
| Tackwhite HT 200 NC | Ichemco | Tackwhite HT 200 NC is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 7 cm, and a peel of 700 g/in. Tackwhite HT 200 NC is most commonly used in double-sided tape and tape applications where...Vea Mas Tackwhite HT 200 NC is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 7 cm, and a peel of 700 g/in. Tackwhite HT 200 NC is most commonly used in double-sided tape and tape applications where the tape must be removed without adhesive transfer on the contact surface. Vea Menos | |
| Tackwhite NA 1 | Ichemco | Tackwhite NA 1 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite NA 1 is most commonly used as a protective material for plastic sheet, de...Vea Mas Tackwhite NA 1 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite NA 1 is most commonly used as a protective material for plastic sheet, decorative laminate, and ceramic applications. Vea Menos | |
| Tackwhite NA 1 (V1) | Ichemco | Tackwhite NA 1 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite NA 1 (V1) is most commonly used as a protective material for p...Vea Mas Tackwhite NA 1 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite NA 1 (V1) is most commonly used as a protective material for plastic sheet, decorative laminate, and ceramic applications. Vea Menos | |
| Tackwhite NA 1 (V2) | Ichemco | Tackwhite NA 1 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite NA 1 (V2) is most commonly used as a protective material for p...Vea Mas Tackwhite NA 1 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite NA 1 (V2) is most commonly used as a protective material for plastic sheet, decorative laminate, and ceramic applications. Vea Menos | |
| Tackwhite NA 1/V | Ichemco | Tackwhite NA 1/V is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 900-1900 mPa.s. Tackwhite NA 1/V is most commonly used as a protective material for plastic shee...Vea Mas Tackwhite NA 1/V is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 900-1900 mPa.s. Tackwhite NA 1/V is most commonly used as a protective material for plastic sheet, decorative laminate, and ceramic applications. Vea Menos | |
| Tackwhite NA 55 | Ichemco | Tackwhite NA 55 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% as a Brookfield viscosity at 25°C of less than 500 mPa.s. Tackwhite NA 55 is most commonly used in protective polyethylene film product...Vea Mas Tackwhite NA 55 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% as a Brookfield viscosity at 25°C of less than 500 mPa.s. Tackwhite NA 55 is most commonly used in protective polyethylene film production applications. Vea Menos | |
| TERPENE RESIN ES T100 | Qingdao Eastsun Chemical Corporation Limited | Light yellow transparent resin tackifier | |
| TERPENE RESIN ES T110 | Qingdao Eastsun Chemical Corporation Limited | Light yellow transparent resin tackifier | |
| Texicryl® 13-078 | Scott Bader | Texicryl® 13-078 is a styrene acrylic copolymer emulsion that is Alkyl Phenol Ethoxylate-free and designed especially as a binder for high performance ceramic tile adhesives. | |
| Uni-Dur E 2002 ARFE | S.A.P.I.C.I. SpA | Uni-Dur E 2002 ARFE is an adhesive that is soluble in ethyl acetate. This product significantly improves the adhesion, cohesion, and heat resistance of the final bond. It can be used to cross-link polyurethane adhesives for natural or synthetic rubber. | |
| UV Cure 60-7105 | Epoxies, Etc. | UV Cure 60-7105 is a low viscosity urethane adhesive, coating, and potting compound. This UV curable resin exhibits good adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. Thi...Vea Mas UV Cure 60-7105 is a low viscosity urethane adhesive, coating, and potting compound. This UV curable resin exhibits good adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. This material is a good choice for products requiring deep section curing. Vea Menos | |
| UV Cure 60-7108 | Epoxies, Etc. | UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in...Vea Mas UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in the manufacture of electronic assemblies. Low viscosity makes it suitable for a variety of other coating applications. Vea Menos | |
| UV Cure 60-7111 | Epoxies, Etc. | UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays goo...Vea Mas UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays good adhesion to a variety of substances. Vea Menos | |
| UV Cure 60-7114 | Epoxies, Etc. | UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice fo...Vea Mas UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice for potting electronic assemblies exposed to excessive moisture. Vea Menos | |
| UV Cure 60-7155 | Epoxies, Etc. | UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and...Vea Mas UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and encapsulating applications. Vea Menos | |
| UV Cure 60-7156 | Epoxies, Etc. | UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is wate...Vea Mas UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. Vea Menos | |
| UV Cure 60-7158 | Epoxies, Etc. | UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for...Vea Mas UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for bonding rigid substrates. It is thixotropic and will not run once applied to the substrate. UV Cure 60-7158 does not contain any solvents, has little shrinkage and provides a smooth non-sticky surface. Vea Menos | |
| UV Cure 60-7170 | Epoxies, Etc. | UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 i...Vea Mas UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to “dark cure.” Once exposed to UV light the UV Cure 60-7170 will continue to cure in the absence of light. Vea Menos | |
| UV Cure 60-7180 | Epoxies, Etc. | UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating...Vea Mas UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating on a wide variety of substrates. It can also be used in small potting applications as well as decorative clear doming on labels, pins, key fobs, magnets, etc. Vea Menos | |
| VESTOPLAST® 206 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 206 es una polialfaoleofina modificada con silano. Se aplica como materia prima para producir adhesivos termocontraibles y sellantes. Este producto también es particularmente adecuado para pegar plásticos (especialmente PP) y vidrio. Las polia...Vea Mas VESTOPLAST® 206 es una polialfaoleofina modificada con silano. Se aplica como materia prima para producir adhesivos termocontraibles y sellantes. Este producto también es particularmente adecuado para pegar plásticos (especialmente PP) y vidrio. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesión a diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VESTOPLAST® 308 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 308 es un grado funcional. Comúnmente, se aplica como materia prima para la producción de adhesivos termocontraibles para pegar metal y sustratos polares. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: exce...Vea Mas VESTOPLAST® 308 es un grado funcional. Comúnmente, se aplica como materia prima para la producción de adhesivos termocontraibles para pegar metal y sustratos polares. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesión a diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VESTOPLAST® 408 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 408 es un grado duro con excelente estabilidad térmica ante la tracción y el rasgado. Se aplica como materia prima para producir adhesivos termocontraibles, por ejemplo, para textiles, papel y para la industria de los embalajes. Las polialfaol...Vea Mas VESTOPLAST® 408 es un grado duro con excelente estabilidad térmica ante la tracción y el rasgado. Se aplica como materia prima para producir adhesivos termocontraibles, por ejemplo, para textiles, papel y para la industria de los embalajes. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesión a diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VESTOPLAST® 508 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 508 es un grado de baja viscosidad, tiempo de reposo prolongado y bajo punto de ablandamiento. Este producto se aplica por lo general como materia prima para producir adhesivos termocontraibles para la industria higiénica y la fabricación de c...Vea Mas VESTOPLAST® 508 es un grado de baja viscosidad, tiempo de reposo prolongado y bajo punto de ablandamiento. Este producto se aplica por lo general como materia prima para producir adhesivos termocontraibles para la industria higiénica y la fabricación de colchones. Vea Menos | Request Sample |
| VESTOPLAST® 520 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 520 es un producto de alta viscosidad con un tiempo de reposo prolongado y bajo punto de ablandamiento. Este producto se aplica generalmente como materia prima para compuestos de relleno para cables. Las polialfaoleofinas amorfas (APAO) VESTOP...Vea Mas VESTOPLAST® 520 es un producto de alta viscosidad con un tiempo de reposo prolongado y bajo punto de ablandamiento. Este producto se aplica generalmente como materia prima para compuestos de relleno para cables. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesión a diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VESTOPLAST® 608 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 608 es un producto con un alto punto de ablandamiento combinado con una viscosidad relativamente a baja temperatura de fusión. Generalmente, se aplica como materia prima para producir adhesivos termocontraibles para papel y para la industria ...Vea Mas VESTOPLAST® 608 es un producto con un alto punto de ablandamiento combinado con una viscosidad relativamente a baja temperatura de fusión. Generalmente, se aplica como materia prima para producir adhesivos termocontraibles para papel y para la industria de los embalajes. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesivo para diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VESTOPLAST® 703 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 703 es un grado viscoso a baja temperatura y de breve tiempo de reposo. Se aplica como materia prima para producir adhesivos termocontraibles para la industria eléctrica y de los embalajes, como así también para fijar fibras y filamentos en al...Vea Mas VESTOPLAST® 703 es un grado viscoso a baja temperatura y de breve tiempo de reposo. Se aplica como materia prima para producir adhesivos termocontraibles para la industria eléctrica y de los embalajes, como así también para fijar fibras y filamentos en alfombras. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesión a diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VESTOPLAST® 704 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 206 es un grado con un tiempo de reposo relativamente breve. Se aplica como materia prima para producir adhesivos termocontraibles aplicables con aerosol para la industria higiénica, y para etiquetas y producción de composiciones sellantes....Vea Mas VESTOPLAST® 206 es un grado con un tiempo de reposo relativamente breve. Se aplica como materia prima para producir adhesivos termocontraibles aplicables con aerosol para la industria higiénica, y para etiquetas y producción de composiciones sellantes. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesión a diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VESTOPLAST® 708 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 708 es un producto relativamente suave, viscoso a baja temperatura de fusión y buena estabilidad térmica bajo tracción. Se aplica como materia prima para producir adhesivos termocontraibles para la industria higiénica, papel y la industria de...Vea Mas VESTOPLAST® 708 es un producto relativamente suave, viscoso a baja temperatura de fusión y buena estabilidad térmica bajo tracción. Se aplica como materia prima para producir adhesivos termocontraibles para la industria higiénica, papel y la industria de los embalajes, como así también para fijar fibras y filamentos en alfombras. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesión a diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VESTOPLAST® 750 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 750 presenta buena resistencia a la tracción y elongación al quiebre combinadas con un bajo punto de ablandamiento. Este producto se aplica como materia prima para producir adhesivos termocontraibles para la industria higiénica y de la madera...Vea Mas VESTOPLAST® 750 presenta buena resistencia a la tracción y elongación al quiebre combinadas con un bajo punto de ablandamiento. Este producto se aplica como materia prima para producir adhesivos termocontraibles para la industria higiénica y de la madera. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesión a diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VESTOPLAST® 751 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 751 is a high viscosity product with a medium softening point. This product can be used as a raw material for various applications such as automotive. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: ...Vea Mas VESTOPLAST® 751 is a high viscosity product with a medium softening point. This product can be used as a raw material for various applications such as automotive. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. Vea Menos | Request Sample |
| VESTOPLAST® 792 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 792 es un grado con alta viscosidad, buena resistencia a la tracción y elongación al quiebre. Este producto se aplica como materia prima para producir adhesivos termocontraibles para la fabricación de muebles. Las polialfaoleofinas amorfas (A...Vea Mas VESTOPLAST® 792 es un grado con alta viscosidad, buena resistencia a la tracción y elongación al quiebre. Este producto se aplica como materia prima para producir adhesivos termocontraibles para la fabricación de muebles. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesión a diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VESTOPLAST® 828 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 828 presenta buena estabilidad térmica bajo carga y en un tiempo de reposo relativamente corto. Este producto se aplica como materia prima para la producción de bitumen modificado con polímeros para membranas impermeabilizantes para techos y p...Vea Mas VESTOPLAST® 828 presenta buena estabilidad térmica bajo carga y en un tiempo de reposo relativamente corto. Este producto se aplica como materia prima para la producción de bitumen modificado con polímeros para membranas impermeabilizantes para techos y puentes, adhesivos termocontraibles para maderas, compuestos para revestimientos pesados para alfombras modulares y alfombras prefromadas para automóviles. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesión a diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VESTOPLAST® 888 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 888 es un producto de alta viscosidad con buena estabilidad térmica bajo carga y un período corto de reposo. Este producto se aplica generalmente como materia prima para producir bitumen modificado con polímeros para membranas impermeabilizant...Vea Mas VESTOPLAST® 888 es un producto de alta viscosidad con buena estabilidad térmica bajo carga y un período corto de reposo. Este producto se aplica generalmente como materia prima para producir bitumen modificado con polímeros para membranas impermeabilizantes para techos y puentes, y adhesivos termocontraibles para maderas. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesión a diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VESTOPLAST® 891 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 891 es un producto de alta viscosidad con buena estabilidad térmica bajo carga y un período corto de reposo. Este producto se aplica como materia prima para producir bitumen modificado con polímeros para membranas impermeabilizantes para techo...Vea Mas VESTOPLAST® 891 es un producto de alta viscosidad con buena estabilidad térmica bajo carga y un período corto de reposo. Este producto se aplica como materia prima para producir bitumen modificado con polímeros para membranas impermeabilizantes para techos y puentes, y adhesivos termocontraibles para maderas. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesión a diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VESTOPLAST® EP 807 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP 807 is a low viscosity product with a high softening point and high shear adhesion failure temperature. This product can be used as a raw material for various applications amongst others automotive and packaging. By adding VESTOPLAST® EP 80...Vea Mas VESTOPLAST® EP 807 is a low viscosity product with a high softening point and high shear adhesion failure temperature. This product can be used as a raw material for various applications amongst others automotive and packaging. By adding VESTOPLAST® EP 807 the adhesion to e.g. PP can be improved. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. Vea Menos | Request Sample |
| VESTOPLAST® EP V2094 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP V2094 is a low viscosity product with a an excellent hot tack and adhesion to various substrates such as PP, PE and foams.This product can be used as a raw material for various low viscosity applications especially hygiene and matresses. Lo...Vea Mas VESTOPLAST® EP V2094 is a low viscosity product with a an excellent hot tack and adhesion to various substrates such as PP, PE and foams.This product can be used as a raw material for various low viscosity applications especially hygiene and matresses. Low process temperatures are possible with heat stability still remaining high. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. Vea Menos | Request Sample |
| VESTOPLAST® EP V2103 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP V2103 is a low viscosity product with a high shear adhesion failure temperature and a medium to high softening point. This product can be used as a raw material for various low viscosity applications especially packaging. In formulations, t...Vea Mas VESTOPLAST® EP V2103 is a low viscosity product with a high shear adhesion failure temperature and a medium to high softening point. This product can be used as a raw material for various low viscosity applications especially packaging. In formulations, the polymer shows a very short setting time which enables for fast production processes. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. Vea Menos | Request Sample |
| VESTOPLAST® S | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® S se aplica como materia prima para producir bitumen modificado con polímeros para la construcción vial. Este producto posee una viscosidad de fusión a 190 grados celsius. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes...Vea Mas VESTOPLAST® S se aplica como materia prima para producir bitumen modificado con polímeros para la construcción vial. Este producto posee una viscosidad de fusión a 190 grados celsius. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesión a diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VESTOPLAST® SR | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® SR se aplica como materia prima para producir bitumen modificado con polímeros para la construcción vial. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (...Vea Mas VESTOPLAST® SR se aplica como materia prima para producir bitumen modificado con polímeros para la construcción vial. Las polialfaoleofinas amorfas (APAO) VESTOPLAST® brindan los siguientes beneficios: excelentes propiedades de adherencia y termosellado (hot tack); adhesión a diversos sustratos; buena cohesión y gran estabilidad térmica; buen comportamiento de barrera ante la humedad y el gas; y muy buena estabilidad hidrolítica y UV. Vea Menos | Request Sample |
| VINNAPAS® 400 H | Wacker Chemie AG | VINNAPAS® 400 H is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0 °C. It was developed as a higher viscosity, high-performance dispersion offering a superior balance of adhesive/c...Vea Mas VINNAPAS® 400 H is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0 °C. It was developed as a higher viscosity, high-performance dispersion offering a superior balance of adhesive/cohesive properties useful in achieving much higher formulation viscosities. Vea Menos | |
| VINNAPAS® 5021 T | Wacker Chemie AG | VINNAPAS® 5021 T is a thixotropic product with good adhesion and water resistance. | |
| VINNAPAS® 7220 E | Wacker Chemie AG | VINNAPAS® 7220 E is the benchmark for excellent water resistance for flexible premium C2 tile adhesives. | |
| VINNAPAS® EP 441 | Wacker Chemie AG | VINNAPAS® EP 441 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. | |
| VINNAPAS® EP 705A | Wacker Chemie AG | VINNAPAS® EP 705A is a formaldehyde free vinyl acetate-ethylene copolymer developed as a base polymer for high-performance adhesives. The low product viscosity as well as good Newtonian flow behavior of VINNAPAS® EP 705A is good for high-speed packaging m...Vea Mas VINNAPAS® EP 705A is a formaldehyde free vinyl acetate-ethylene copolymer developed as a base polymer for high-performance adhesives. The low product viscosity as well as good Newtonian flow behavior of VINNAPAS® EP 705A is good for high-speed packaging machines. Vea Menos | |
| VINNAPAS® EP 760 | Wacker Chemie AG | VINNAPAS® EP 760 is a unique, rapid-setting vinyl acetate-ethylene copolymer. It is not simply a high-solids version of VINNAPAS® EP series dispersion, but a polymer that has outstanding adhesion to very difficult-to-bond substrates including polyester, p...Vea Mas VINNAPAS® EP 760 is a unique, rapid-setting vinyl acetate-ethylene copolymer. It is not simply a high-solids version of VINNAPAS® EP series dispersion, but a polymer that has outstanding adhesion to very difficult-to-bond substrates including polyester, poly(ethylene terephthalate), tempered aluminum foil and polystyrene. Vea Menos |
