| PHENODUR® VPW 1942/52WA | Allnex | PHENODUR® VPW 1942/52WA is a formulated phenolic/epoxide system, intended as sole-binder for the interior and exterior coating of metallic packaging materials and for corrosion resistant industrial stoving systems. | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...Vea Mas ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. Vea Menos | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...Vea Mas EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. Vea Menos | Request Sample |
| PHENODUR® PR 566/65BX | Allnex | PHENODUR® PR 566 is a Bisphenol A - free, heat-curing, non-plasticized phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE & BPA-NI lacquers) as well as phenolic/epoxy resin systems for the interior and exterior layer o...Vea Mas PHENODUR® PR 566 is a Bisphenol A - free, heat-curing, non-plasticized phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE & BPA-NI lacquers) as well as phenolic/epoxy resin systems for the interior and exterior layer of metal containers with high adhesion, excellent flexibility and good chemical resistance. Vea Menos | Request Sample |
| Epoxy Acrylate SE 1605 | Soltech Ltd | Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is c...Vea Mas Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is commonly used in applications such as metal substrate inks, metal substrate coatings, and 2 component curing systems, Epoxy Acrylate SE 1605 is 100% polymer solid by weight with a viscosity of 800-1,200 at 60℃. Vea Menos | |
| CYMEL® U-216-10LF | Allnex | La resina CYMEL® U-216-10LF es una resina de urea n-butilada que tiene una excelente compatibilidad con resinas hidrófobas. Es la versión de CYMEL® 216-8 sin solventes con el beneficio adicional de menor formaldehido libre. Está diseñada para revestimient...Vea Mas La resina CYMEL® U-216-10LF es una resina de urea n-butilada que tiene una excelente compatibilidad con resinas hidrófobas. Es la versión de CYMEL® 216-8 sin solventes con el beneficio adicional de menor formaldehido libre. Está diseñada para revestimientos decorativos metálicos, revestimientos de latas e imprimadores de revestimiento de bobinas. Este producto también puede agregarse como agente de nivelación en sistemas de resinas epoxi de aminas catalizadas de curado en frío. Vea Menos | Request Sample |
| EPOXY METHACRYLATE 97-053 | Rahn AG | EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion ...Vea Mas EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion resistance, high hardness and scratch resistance, good adhesion and monomer-free. It improves resistance to solvents and chemicals. EPOXY METHACRYLATE 97-053 is designed for dental composites, UV adhesives and UV curtain systems. Vea Menos | Request Sample |
| Epoxy Modified Polysiloxane R-8202 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8202 is an epoxy modified polysiloxane. It maintains good epoxy reaction activity, coupling effects, and provides better storage activity. This product is widely used in modified plastics and coating fields, and is recommended for aqueous systems and co...Vea Mas R-8202 is an epoxy modified polysiloxane. It maintains good epoxy reaction activity, coupling effects, and provides better storage activity. This product is widely used in modified plastics and coating fields, and is recommended for aqueous systems and compatible polymer formulas. Vea Menos | |
| SETAL® 690 | Allnex | SETAL® 690 is a water reduceable acrylated epoxy ester which has good compatability with acrylic emulsions and used to formulate metal primers and enamels, both air dry and baking systems. | Request Sample |
| BECKOPOX™ VEM 2448/50EEP | Allnex | Beckopox® VEM 2448/50EEP is a modified, carboxylated epoxy resin, self cross-linking. It's a sole binder for white and clear interior and exterior can-coating systems, stamping enamels, capsule lacquers, foil lacquers and coil-coating primers with outstan...Vea Mas Beckopox® VEM 2448/50EEP is a modified, carboxylated epoxy resin, self cross-linking. It's a sole binder for white and clear interior and exterior can-coating systems, stamping enamels, capsule lacquers, foil lacquers and coil-coating primers with outstanding resistances. Vea Menos | Request Sample |
| DUROXYN® EF 900/60X | Allnex | Duroxyn® EF 900/60X es un éster de resina epoxi de secado al aire y de secado al horno que se utiliza en sistemas de pintura anticorrosiva y imprimadores, y pinturas de polvo de zinc. | Request Sample |
| BECKOPOX™ EP 2384w/57WA | Allnex | Beckopox EP 2384w es una resina de epoxi sólida como dispersión acuosa del tipo 1. Formulada junto con agentes endurecedores adecuados tales como Beckopox EH 623w, EH 659w, VEH 2188w o VEH 2177w; resulta en sistemas de revestimiento de secado rápido para ...Vea Mas Beckopox EP 2384w es una resina de epoxi sólida como dispersión acuosa del tipo 1. Formulada junto con agentes endurecedores adecuados tales como Beckopox EH 623w, EH 659w, VEH 2188w o VEH 2177w; resulta en sistemas de revestimiento de secado rápido para substratos minerales y de metal. La propiedad de secado rápida hace posible el aplicar revestimientos en el curso de un día de trabajo. Vea Menos | Request Sample |
| GENOMER* 4267 | Rahn AG | GENOMER* 4267 is an aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4267 is recommended for applications where both high flexibility combined with the toughness expected of urethane acrylates are required. The product is used in combination with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is recommended for use in the following applications: non-yellowing industrial coatings; coatings for automotive applications and mobile phones; printing inks and varnishes; adhesives; and flexibilizer for corrosion-resistant systems...Vea Mas GENOMER* 4267 is an aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4267 is recommended for applications where both high flexibility combined with the toughness expected of urethane acrylates are required. The product is used in combination with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is recommended for use in the following applications: non-yellowing industrial coatings; coatings for automotive applications and mobile phones; printing inks and varnishes; adhesives; and flexibilizer for corrosion-resistant systems. Vea Menos | Request Sample |
| BECKOPOX™ VEP 2382w/55WA | Allnex | Dispersión de epoxi en agua. | Request Sample |
| BECKOPOX™ EP 128 | Allnex | De viscosidad baja, resina de epoxi líquida diluida en reactivo. | Request Sample |
| BECKOPOX™ EP 387w/52WA | Allnex | BECKOPOX® EP 387w/52WA es una resina epoxi sólida flexible. Es adecuada para imprimadores de protección anticorrosiva con muy buena adhesión a la mayoría de los sustratos metálicos. También es adecuada para su uso en sistemas de una sola capa y decorativo...Vea Mas BECKOPOX® EP 387w/52WA es una resina epoxi sólida flexible. Es adecuada para imprimadores de protección anticorrosiva con muy buena adhesión a la mayoría de los sustratos metálicos. También es adecuada para su uso en sistemas de una sola capa y decorativos para sustratos metálicos. Para óptima protección contra la corrosión se recomienda el uso de 75% de la cantidad estequiométrica del agente de curado. Vea Menos | Request Sample |
| CRYLCOAT® 1702-0 | Allnex | CRYLCOAT® 1702-0 es una resina de poliéster carboxilo funcional de baja reactividad para usar en una proporción de 70/30 en revestimientos híbridos de polvo. Los sistemas a base de CRYLCOAT® 1702-0 exhiben excelentes propiedades mecánicas, muy buen flujo ...Vea Mas CRYLCOAT® 1702-0 es una resina de poliéster carboxilo funcional de baja reactividad para usar en una proporción de 70/30 en revestimientos híbridos de polvo. Los sistemas a base de CRYLCOAT® 1702-0 exhiben excelentes propiedades mecánicas, muy buen flujo y resistencia al sobrehorneado. Vea Menos | Request Sample |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| VIACRYL® VSC 6276w/44WA | Allnex | Viacryl® VSC 6276W/44WA es una emulsión copolímera hidroxi funcional acuosa que puede reticularse con resinas reactivas de melamina, como Cymel 325 o Cymel 327 para proporcionar brillo en sistemas de revestimientos industriales. | Request Sample |
| RESYDROL® AX 6267w/43WA | Allnex | RESYDROL® AX 6267w/43WA is an epoxy-acrylic hybrid system as aqueous emulsion. It is suited to formulate corrosion resistant primers and in view of its rapid drying properties is generally applied by spraying. | Request Sample |
| VIACRYL® VSC 6279w/45WA | Allnex | Viacryl® VSC 6279W/45WA es una emulsión copolímera a base de ésteres acrílicos y estireno sin co-solventes orgánicos ni alquil fenol etoxilados. Se puede utilizar como único aglutinante para formular imprimadores anticorrivos de secado rápido. Incluso se ...Vea Mas Viacryl® VSC 6279W/45WA es una emulsión copolímera a base de ésteres acrílicos y estireno sin co-solventes orgánicos ni alquil fenol etoxilados. Se puede utilizar como único aglutinante para formular imprimadores anticorrivos de secado rápido. Incluso se puede utilizar para formular sistemas de acabados decorativos antiamarilleo con una excelente durabilidad a la intemperie y resistencia a los rayos UV. Vea Menos | Request Sample |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® PPA 6 es una opción menos tradicional para la producción de oligómeros de acrilato de uretano curados con UV. Es un excelente diluyente reactivo de baja contracción para sistemas UV a base de acrilatos de uretano y ésteres de vinilo (acrilatos ep...Vea Mas Bisomer® PPA 6 es una opción menos tradicional para la producción de oligómeros de acrilato de uretano curados con UV. Es un excelente diluyente reactivo de baja contracción para sistemas UV a base de acrilatos de uretano y ésteres de vinilo (acrilatos epoxi). Este producto tiene un número de acidez de Bisomer® PPA6 presenta baja temperatura de transición vítrea (Tg) y ofrece excelentes propiedades plastificantes cuando se incorpora a polímeros, incluidos los polímeros de emulsión. Este producto es ideal en la preparación de oligómeros de UV, polímeros de emulsión, tintas de impresión y dispersiones de poliuretano (PUD). También se utiliza en polioles acrílicos tradicionales para revestimientos de superficies. Vea Menos |
