| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...Vea Mas Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. Vea Menos | |
| ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
| ADDITOL® VXW 4934 | Allnex | Aditivo para la regulación de propiedades reológicas de pinturas diluibles en agua. | Request Sample |
| ADDITOL® VXW 6360 | Allnex | Espesante de poliuretano para sistemas de capa acuosos de secado al aire. Tiene propiedades reológicas excelentes, resultando en flujo y nivelación mejorados, espesor de película y fregado. | Request Sample |
| ADDITOL® VXW 6388 | Allnex | Espesante de poliuretano para sistemas de revestimiento acuosos de secado al aire. | Request Sample |
| ADDITOL® XL 280 | Allnex | Pasta fluida de anti-asentamiento con propiedades humectantes para pigmentos, a base de una arcilla especialmente modificada de montmorrilonite. | Request Sample |
| ADDITOL® XL 6557 | Allnex | Additol® XL 6557 es un medio de pulido polimérico reticulable. Proporciona humectación del pigmento, baja viscosidad de la pasta y buena estabilización de pigmentos en las pastas de pigmentos. Los revestimientos de acabado con tinta con este producto tien...Vea Mas Additol® XL 6557 es un medio de pulido polimérico reticulable. Proporciona humectación del pigmento, baja viscosidad de la pasta y buena estabilización de pigmentos en las pastas de pigmentos. Los revestimientos de acabado con tinta con este producto tienen una gran dureza, resistencia al amarilleo, alto brillo, buenas propiedades de secado y buena resistencia al agua y al clima. Se recomienda para aplicaciones industriales a base de solventes, como revestimientos de bobinas, pinturas anticorrosivas en aplicaciones navales y de trabajo pesado, agricultura, madera industrial y otros revestimientos metálicos. Vea Menos | Request Sample |
| AERODISP® WF 7620 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WF 7620 is an aqueous dispersion containing 20 weight % active material of a functionalized AEROSIL®. | Request Sample |
| AERODISP® WR 8520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WR 8520 es una dispersión especial, estructurada, altamente cargada de AEROSIL®. hidrofóbico. Se puede utilizar para estabilizar pigmentos, como agente antisedimentación, para controlar la reología y para mejorar las propiedades mecánicas de rev...Vea Mas AERODISP® WR 8520 es una dispersión especial, estructurada, altamente cargada de AEROSIL®. hidrofóbico. Se puede utilizar para estabilizar pigmentos, como agente antisedimentación, para controlar la reología y para mejorar las propiedades mecánicas de revestimientos pigmentados a base de agua. Se recomienda para revestimientos acuosos en los que la dispersión debe agregarse al revestimiento en el momento de la mezcla mediante fuerzas de corte bajas o medias como por ejemplo, un disolvente. Vea Menos | Request Sample |
| AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 200 es una sílice pirogénica hidrofílica con una superficie específica de 200 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, cosméticos, compuestos de cable y geles, goma de silicona, y en la protecció...Vea Mas AEROSIL® 200 es una sílice pirogénica hidrofílica con una superficie específica de 200 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, cosméticos, compuestos de cable y geles, goma de silicona, y en la protección de las plantas. AEROSIL® 200 tiene control de la reología y tixotropía de los sistemas líquidos, aglutinantes y polímeros. También se utiliza para mejorar el flujo libre y anti-aglutinante característico de polvos, así como un anti-sedimentación, espesamiento, y agente anti-flacidez. Vea Menos | Request Sample |
| AEROSIL® 300 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 300 es una sílice pirogénica hidrofílica con una superficie específica de 300 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, compuestos de cable, resinas de poliéster insaturado, y caucho de silicona l...Vea Mas AEROSIL® 300 es una sílice pirogénica hidrofílica con una superficie específica de 300 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, compuestos de cable, resinas de poliéster insaturado, y caucho de silicona líquido. AEROSIL® 300 ha demostrado una excelente transparencia en resinas de poliéster insaturado y control de la reología y tixotropía de líquidos, aglutinantes y polímeros. Vea Menos | Request Sample |
| AEROSIL® 380 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 380 es una sílice pirogénica hidrofílica con una superficie específica de 380 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, compuestos de cable, y resinas de poliéster insaturado. AEROSIL® 380 tiene u...Vea Mas AEROSIL® 380 es una sílice pirogénica hidrofílica con una superficie específica de 380 m²/g. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, tintas de impresión, compuestos de cable, y resinas de poliéster insaturado. AEROSIL® 380 tiene una excelente transparencia en resinas de poliéster insaturado y tiene control de la reología y tixotropía de líquidos, aglutinantes y polímeros. También se puede utilizar para el refuerzo de caucho de silicona y auxiliar de flujo. Vea Menos | Request Sample |
| AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...Vea Mas AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. Vea Menos | Request Sample |
| AEROSIL® MOX 80 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® MOX 80 is a cofumed oxide consisting of silicon dioxide and approximately 1 % aluminium oxide, manufactured using the AEROSIL®-process. | Request Sample |
| AEROSIL® R 106 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 106 is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane). | Request Sample |
| AEROSIL® R 202 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 202 es una sílice pirogénica después de tratada con un polidimetilsiloxano. Se utiliza para los adhesivos y selladores, epoxi -, resinas de viniléster, geles de cable, y los recubrimientos de gel. AEROSIL® R 202 con la ayuda de espesamiento y t...Vea Mas AEROSIL® R 202 es una sílice pirogénica después de tratada con un polidimetilsiloxano. Se utiliza para los adhesivos y selladores, epoxi -, resinas de viniléster, geles de cable, y los recubrimientos de gel. AEROSIL® R 202 con la ayuda de espesamiento y tixotropía de líquidos polares complejos basados en epoxi, poliuretano, o resinas de viniléster. También ayuda a que el engrosamiento y tixotropía de geles de cable para cables de fibra óptica. Vea Menos | Request Sample |
| AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based ...Vea Mas AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. Vea Menos | Request Sample |
| AEROSIL® R 805 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 805 es una sílice pirogénica después de tratada con un octilsilano basado en AEROSIL® 200. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, lacados multicapa epoxi y de tóner. AEROSIL® R 805 tiene un control efectivo de la reol...Vea Mas AEROSIL® R 805 es una sílice pirogénica después de tratada con un octilsilano basado en AEROSIL® 200. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, lacados multicapa epoxi y de tóner. AEROSIL® R 805 tiene un control efectivo de la reología en sistemas líquidos complejos tales como 2 recubrimientos pack- epoxi. También se puede aplicar en sistemas de recubrimiento como un agente anti-sedimentación, para la estabilización de pigmentos, y para mejorar el efecto de protección contra la corrosión. Vea Menos | Request Sample |
| AEROSIL® R 812 S | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 sílice pirogénica después tratada con HMDS (hexametildisilazano) basado en AEROSIL® 300. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, y caucho de silicona. AEROSIL® R 812 se puede aplicar en sistemas de revestimientos c...Vea Mas AEROSIL® R 812 sílice pirogénica después tratada con HMDS (hexametildisilazano) basado en AEROSIL® 300. Se utiliza en pinturas y recubrimientos, adhesivos y selladores, y caucho de silicona. AEROSIL® R 812 se puede aplicar en sistemas de revestimientos como un agente anti-sedimentación, para la estabilización de pigmentos, y para mejorar el efecto de protección contra la corrosión. También se puede incorporar fácilmente en formulaciones de caucho de silicona y mejora sus propiedades mecánicas y ópticas. Vea Menos | Request Sample |
| AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 816 es un sílice ahumado tratado posteriormente con un hexadecilsilano a base de AEROSIL® 200. Se utiliza en sistemas de revestimiento a base de agua. AEROSIL® R 816 se puede aplicar en sistemas de revestimientos como agente antisedimentación, ...Vea Mas AEROSIL® R 816 es un sílice ahumado tratado posteriormente con un hexadecilsilano a base de AEROSIL® 200. Se utiliza en sistemas de revestimiento a base de agua. AEROSIL® R 816 se puede aplicar en sistemas de revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar el efecto de protección contra la corrosión. Además, ofrece un eficaz control reológico en sistemas líquidos complejos. Vea Menos | Request Sample |
| AEROSIL® R 8200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 8200 is a structure-modified, highly hydrophobic fumed silica. Due to its low thickening efficiency, high loading levels at low viscosities are achievable. | Request Sample |
| AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 es un sílice ahumado tratado posteriormente con DDS (dimetildiclorosilano). Se utiliza en goma de silicona y selladores de silicona, pinturas y revestimientos, tintas de impresión y toner, compuestos de cables y geles, adhesivos y en agente...Vea Mas AEROSIL® R 972 es un sílice ahumado tratado posteriormente con DDS (dimetildiclorosilano). Se utiliza en goma de silicona y selladores de silicona, pinturas y revestimientos, tintas de impresión y toner, compuestos de cables y geles, adhesivos y en agentes fitosanitarios. AEROSIL® R 972 tiene control reológico de sistemas líquidos complejos y es resistente al agua e hidrofobizante de sistemas líquidos. Se emplea en revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar la protección contra la corrosión. Vea Menos | Request Sample |
| AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
| AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 974 es un sílice ahumado hidrofóbico tratado posteriormente con DDS (dimetildiclorosilano) basado en un sílice ahumado hidrofílico con un área de superficie específica de 200 m²/g. Se utiliza en pinturas y revestimientos, goma de silicona y sel...Vea Mas AEROSIL® R 974 es un sílice ahumado hidrofóbico tratado posteriormente con DDS (dimetildiclorosilano) basado en un sílice ahumado hidrofílico con un área de superficie específica de 200 m²/g. Se utiliza en pinturas y revestimientos, goma de silicona y selladores de silicona, toner negativo, adhesivos y revestimientos poliméricos. AEROSIL® R 974 se emplea en revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar la protección contra la corrosión. Además, mejora la hidrofobicidad y la reología de las tintas de impresión offset. Vea Menos | Request Sample |
| AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...Vea Mas AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. Vea Menos | Request Sample |
| AT-152 | Antex Chemicals (Zhongshan) Limited | AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is ...Vea Mas AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is desired, particularly in paint, pigment printing and paper printing applications. Vea Menos | |
| AT-166 | Antex Chemicals (Zhongshan) Limited | AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation indus...Vea Mas AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation industries. Vea Menos | |
| AT-288 | Antex Chemicals (Zhongshan) Limited | AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation ...Vea Mas AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation industries. Vea Menos | |
| BENATHIX® | Elementis 海名斯特殊化学 | BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mix...Vea Mas BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mixing equipment unlike conventional organoclays. Vea Menos | |
| BENGEL® 434 | Elementis 海名斯特殊化学 | BENGEL® 434 rheological additive is a general purpose solvent organoclay (tetra-alkyl ammonium bentonite) designed for low to medium polarity aliphatic and aromatic coating systems. It also works fine in selective high polarity systems. | |
| BENGEL® 818 | Elementis 海名斯特殊化学 | BENGEL® 818 is a solvent that demonstrates excellent dispersibility compared to conventional organoclay. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, will provide great flexibility in manufac...Vea Mas BENGEL® 818 is a solvent that demonstrates excellent dispersibility compared to conventional organoclay. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, will provide great flexibility in manufacturing process. Vea Menos | |
| BENGEL® 828 | Elementis 海名斯特殊化学 | BENGEL® 828 is a rheological additive greatly simplifies the formulation and manufacture of paint systems contain moderate to high polarity solvents such as ketones, esters, glycol ethers, ether esters, alcohol. | |
| BENGEL® 958 | Elementis 海名斯特殊化学 | BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufactu...Vea Mas BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufacturing procedures. Vea Menos | |
| BENGEL® 988 | Elementis 海名斯特殊化学 | BENGEL® 988 rheological additive is an organic derivative of a bentonite clay. It is designed for use in low to high polarity systems containing aliphatic solvents, aromatic solvents, ketones, esters, glycol ethers and alcohols. It is easy to incorporate ...Vea Mas BENGEL® 988 rheological additive is an organic derivative of a bentonite clay. It is designed for use in low to high polarity systems containing aliphatic solvents, aromatic solvents, ketones, esters, glycol ethers and alcohols. It is easy to incorporate and can be added dry to the pigment grinding process without chemical activator or the preparation of a pregel. Vea Menos | |
| BENTONE® 27 | Elementis 海名斯特殊化学 | BENTONE® 27 rheological additive is an organic solvent derivative of a hectorite clay. It is designed for moderate to high-polarity organic systems and for synthetic binders. | |
| BENTONE® 34 | Elementis 海名斯特殊化学 | BENTONE® 34 is an organic solvent derivative of a bentonite clay. This rheological additive is designed for low to intermediate polarity organic systems. | |
| BENTONE SD® -1 | Elementis 海名斯特殊化学 | BENTONE SD®-1 rheological additive is an organic derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium-polarity solvents. | |
| BENTONE SD® -2 | Elementis 海名斯特殊化学 | BENTONE SD®-2 為一適用於中至高極性有機溶劑塗料體系的有機膨潤土添加劑。 | |
| BK-127 | LUKEM D.O.O. | BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It...Vea Mas BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It is also used in inks and nitro lacquer. Vea Menos | |
| BK-883 | LUKEM D.O.O. | BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It ...Vea Mas BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It is also used in adhesives, inks, putties, and sealants. Vea Menos | |
| BK–884A | LUKEM D.O.O. | BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives...Vea Mas BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives, varnishes, inks, nitro lacquer, and sealants. Vea Menos | |
| BK-923 | LUKEM D.O.O. | BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is ...Vea Mas BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is also used in inks, adhesives, putties, sealants, varnishes, and nitro lacquer. Vea Menos | |
| BP®-183 | Zhejiang Huate New Material Co., Ltd. | BP®-183 is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low and middle polar solvent systems. It is also comm...Vea Mas BP®-183 is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low and middle polar solvent systems. It is also commonly used in mixed paints, paint fillers, sealants, and printing inks. Vea Menos | |
| BP®-183B | Zhejiang Huate New Material Co., Ltd. | BP®-183B is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low, middle and high polar solvent systems. It is al...Vea Mas BP®-183B is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low, middle and high polar solvent systems. It is also commonly used in mixed paints, bitumen paints, chlorinated rubber paints, anticorrosion paints, epoxy paints, sealants, and printing inks. Vea Menos | |
| BP®-184 | Zhejiang Huate New Material Co., Ltd. | BP®-184 is a solvent based organoclay additive with rheological properties that appears as a white, free flowing powder in appearance. This product is easy to disperse, and is commonly used in sealants, high-grade paints, and printing inks. | |
| BP®-186 | Zhejiang Huate New Material Co., Ltd. | BP®-186 is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and print...Vea Mas BP®-186 is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and printing inks. Vea Menos | |
| BP®-186B | Zhejiang Huate New Material Co., Ltd. | BP®-186B is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and prin...Vea Mas BP®-186B is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and printing inks. Vea Menos | |
| BP®-186C | Zhejiang Huate New Material Co., Ltd. | BP®-186C is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a light yellow, free flowing powder. It is also commonly used in sealants, furniture paints, an...Vea Mas BP®-186C is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a light yellow, free flowing powder. It is also commonly used in sealants, furniture paints, and printing inks. Vea Menos | |
| BP®-186D | Zhejiang Huate New Material Co., Ltd. | BP®-186D is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a white, free flowing powder. It is commonly used in sealants, superior paints, and printing in...Vea Mas BP®-186D is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a white, free flowing powder. It is commonly used in sealants, superior paints, and printing inks. Vea Menos | |
| BP®-188L | Zhejiang Huate New Material Co., Ltd. | BP®-188L is a water-based bentonite rheological additive created from specially processed high purity hydrophilic montmorillonite. This product has high heat resistance and bio-stability in addition to thixotropic properties, and appears as a light white,...Vea Mas BP®-188L is a water-based bentonite rheological additive created from specially processed high purity hydrophilic montmorillonite. This product has high heat resistance and bio-stability in addition to thixotropic properties, and appears as a light white, free-flowing powder. It is commonly used in water-based ink, water-based coatings, and emulsion paints. Vea Menos | |
| BP®-283 | Zhejiang Huate New Material Co., Ltd. | BP®-283 is a tetraallkyl ammonium bentonite based organoclay used in solvent-based systems of low to medium polarity. This product is also used as an anti-sagging agent in inks and adhesives. | |
| BP®-286 | Zhejiang Huate New Material Co., Ltd. | BP®-286 is a solvent based organoclay with rheological properties. This product appears as a white, free flowing powder, and provides strong thickening capabilities in addition to high transparency. It is commonly used in superior paints and printing inks...Vea Mas BP®-286 is a solvent based organoclay with rheological properties. This product appears as a white, free flowing powder, and provides strong thickening capabilities in addition to high transparency. It is commonly used in superior paints and printing inks. Vea Menos | |
| BP®-500 | Zhejiang Huate New Material Co., Ltd. | BP®-500 is a solvent based organoclay with rheological properties. This product is used to dissolve solvents and increase viscosity and thixotropy in resin systems. It provides a light color and high transparency in addition to colloid fineness, and is co...Vea Mas BP®-500 is a solvent based organoclay with rheological properties. This product is used to dissolve solvents and increase viscosity and thixotropy in resin systems. It provides a light color and high transparency in addition to colloid fineness, and is commonly applied in paints, coatings, inks, and adhesives. Vea Menos | |
| BP®-923 | Zhejiang Huate New Material Co., Ltd. | BP®-923 is a solvent based organoclay with rheological properties that is applied in low, middle and high polar solvent systems. This product provides anti-flowing and thixotropic effects in addition to high dispersion. It is applicable to epoxy paints, a...Vea Mas BP®-923 is a solvent based organoclay with rheological properties that is applied in low, middle and high polar solvent systems. This product provides anti-flowing and thixotropic effects in addition to high dispersion. It is applicable to epoxy paints, anti-corrosion paints, and inks. Vea Menos | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...Vea Mas CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. Vea Menos | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...Vea Mas CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. Vea Menos | |
| CAB-O-SPERSE® PG001 | Cabot Corporation - Additives | CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product ...Vea Mas CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product is well suited for use in inkjet inks. Vea Menos | |
| CLAYTONE 34 | BYK 毕克 | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...Vea Mas CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. Vea Menos | |
| CLAYTONE® 40 | BYK 毕克 | Claytone® 40 es un derivativo de bentonita organofílica que se utiliza como espesante tixotrópico y agente anti-sedimentación en sistemas de revestimientos basados en solventes de baja a media polaridad. Es una arcilla orgánica tradicional que requiere el...Vea Mas Claytone® 40 es un derivativo de bentonita organofílica que se utiliza como espesante tixotrópico y agente anti-sedimentación en sistemas de revestimientos basados en solventes de baja a media polaridad. Es una arcilla orgánica tradicional que requiere el agregado de un activador para lograr una eficiencia completa. Como producto de esmectita organofílica, puede aumentar en medios orgánicos y construir una estructura de gel (estructura de casa de naipes). Los enlaces débiles de hidrógeno entre las plaquetas simples de esmectita es la razón de esta estructura tixotrópica de gel. Para una eficiencia óptima, se necesita una completa separación de las plaquetas (completa dispersión de aglomerados en partículas primarias). Vea Menos | |
| CLAYTONE® AF | BYK 毕克 | Claytone® AF es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes alifáticos y mezclas de solventes alifático-aromáticos que muestran una polaridad de media a baja. Claytone® AF produce viscosidad reproducible y desar...Vea Mas Claytone® AF es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes alifáticos y mezclas de solventes alifático-aromáticos que muestran una polaridad de media a baja. Claytone® AF produce viscosidad reproducible y desarrollo tixotrópico, un alto grado de control de pandeo y previene la sedimentación de pigmentos. Claytone® AF es auto-dispersante y no requiere una activador polar. Claytone® AF elimina la necesidad de alto corte o pregeles. Vea Menos | |
| CLAYTONE® APA | BYK 毕克 | Claytone® APA es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes aromáticos y mezclas de solventes aromático-oxigenados que muestran una polaridad de media a alta. Claytone® APA demuestra alta eficiencia gelificante...Vea Mas Claytone® APA es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes aromáticos y mezclas de solventes aromático-oxigenados que muestran una polaridad de media a alta. Claytone® APA demuestra alta eficiencia gelificante, viscosidad reproducible y desarrollo tixotrópico, un alto grado de control de pandeo y previene la sedimentación de pigmentos y rellenos. Vea Menos | |
| CLAYTONE® HT | BYK 毕克 | Claytone® HT es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes aromáticos y alifáticos que muestran una polaridad de baja a media. Claytone® HT demuestra alta eficiencia gelificante, viscosidad reproducible y desar...Vea Mas Claytone® HT es una montmorillonita modificada diseñada para su uso en sistemas que contengan solventes aromáticos y alifáticos que muestran una polaridad de baja a media. Claytone® HT demuestra alta eficiencia gelificante, viscosidad reproducible y desarrollo tixotrópico, un alto grado de control de pandeo y previene la firme sedimentación de pigmentos y rellenos. Este producto es un aditivo reológico de alto rendimiento para uso en pinturas a base de aceite de alto rendimiento y es especialmente adecuada para revestimientos de mantenimiento, de marina e industriales. Vea Menos | |
| CLAYTONE® HY | BYK 毕克 | Claytone® HY es una montmorillonita modificada diseñada para su uso en tintas de impresión con una polaridad de baja a media. Claytone® HY demuestra alta eficiencia gelificante, aumenta la viscosidad y el valor de rendimiento, previene la aglomeración y s...Vea Mas Claytone® HY es una montmorillonita modificada diseñada para su uso en tintas de impresión con una polaridad de baja a media. Claytone® HY demuestra alta eficiencia gelificante, aumenta la viscosidad y el valor de rendimiento, previene la aglomeración y sedimentación de pigmentos, reduce el vapor y le permite al fabricante de tintas controlar la viscosidad pegajosa. Vea Menos | |
| CLAYTONE-40 | BYK 毕克 | TIXOGEL® VP es un agente tixotrópico y anti-sedimentación para sistemas de baja a media polaridad. Para lograr una eficiencia óptima, TIXOGEL® VP deberia dispersarse utilizando altas fuerzas de corte. | |
| CLAYTONE-EM | BYK 毕克 | CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-ER | BYK 毕克 | CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-IMG 400 | BYK 毕克 | CLAYTONE-IMG 400 is a general purpose rheological additive for diesel and mineral oil based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
| CLAYTONE-MPZ | BYK 毕克 | TIXOGEL® MPZ es un producto de la serie de arcillas orgánicas de Máximo Rendimiento. Es un espesante tixotrópico y agente anti-sedimentación sumamente eficiente utilizado en sistemas de media a alta polaridad. No es necesario el agregado de un activador e...Vea Mas TIXOGEL® MPZ es un producto de la serie de arcillas orgánicas de Máximo Rendimiento. Es un espesante tixotrópico y agente anti-sedimentación sumamente eficiente utilizado en sistemas de media a alta polaridad. No es necesario el agregado de un activador en sistemas de alta polaridad como regla, pero es beneficioso en sistemas con media polaridad. Vea Menos | |
| CLAYTONE-SF | BYK 毕克 | CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE®-VZ | BYK 毕克 | TIXOGEL® VZ es un agente tixotrópico y anti-sedimentación para sistemas polares. Para una óptima eficiencia, TIXOGEL® VZ debería incorporarse bajo corte alto. Preferentemente, TIXOGEL® VZ es agregado a la base de fábrica. Este no es un grado preactivado y...Vea Mas TIXOGEL® VZ es un agente tixotrópico y anti-sedimentación para sistemas polares. Para una óptima eficiencia, TIXOGEL® VZ debería incorporarse bajo corte alto. Preferentemente, TIXOGEL® VZ es agregado a la base de fábrica. Este no es un grado preactivado y los activadores tienen que ser utilizados para brindar un rendimiento óptimo. Vea Menos | |
| DA-40A | Antex Chemicals (Zhongshan) Limited | DA-40A is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste. | |
| DA-40N | Antex Chemicals (Zhongshan) Limited | DA-40N is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste. | |
| Decoflux DP R 12 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease visco...Vea Mas Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. Vea Menos | |
| Decoflux DP R 24 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosi...Vea Mas Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. Vea Menos | |
| DeuRheo 201P | Elementis 海名斯特殊化学 | DeuRheo 201P is used as a dispersed polyethylene wax slurry, convenient and easy to disperse as an anti-settling agent. Application areas are alkyd / amine baking, acrylic acid / amine baking, epoxy resin, vinyl, polyurethane coatings, solvent-based inks...Vea Mas DeuRheo 201P is used as a dispersed polyethylene wax slurry, convenient and easy to disperse as an anti-settling agent. Application areas are alkyd / amine baking, acrylic acid / amine baking, epoxy resin, vinyl, polyurethane coatings, solvent-based inks and aluminum paint. Vea Menos | |
| DeuRheo 229 | Elementis 海名斯特殊化学 | DeuRheo 229 is pre-dispersed in a solvent of polyethylene amine wax, and has anti-settling of pigments and fillers in the coating system with a anti-sagging effect. | |
| DeuRheo WT-102 | Elementis 海名斯特殊化学 | DeuRheo WT-102 is an aqueous associative thickener based on polyurethane. It provides higher viscosity at low shear rate. | |
| DeuRheo WT-105A | Elementis 海名斯特殊化学 | DeuRheo WT-105A is an aqueous associative thickener based on polyurethane. Provide thickening and flowing. | |
| DeuRheo WT-108 | Elementis 海名斯特殊化学 | DeuRheo WT-108 is a non-ionic associative thickener (NiSAT) suitable for use in aqueous systems. It provides medium shear viscosity and is compatible with fluidity. This product is designed to be free of tin, APEO and organic solvents. | |
| DeuRheo WT-108F | Elementis 海名斯特殊化学 | DeuRheo WT-108F is a nonionic synthetic associative thickener (NiSAT) for aqueous applications to increase medium shear viscosity and provide good flowing. It is designed to be free of Tin, APEO and organic solvents. | |
| Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...Vea Mas Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. Vea Menos | |
| DISPERBYK®-2013 | BYK 毕克 | DISPERBYK®-2013 es un aditivo dispersante y humectante libre de solventes para sistemas 100% UV y sistemas UV a base de agua y de solventes para tintas de impresión y revestimientos. Basado en su polaridad de producto balanceado y su modo de entrega al 10...Vea Mas DISPERBYK®-2013 es un aditivo dispersante y humectante libre de solventes para sistemas 100% UV y sistemas UV a base de agua y de solventes para tintas de impresión y revestimientos. Basado en su polaridad de producto balanceado y su modo de entrega al 100%, DISPERBYK®-2013 logra una excelente estabilización, en particular en sistemas 100% UV y especialmente de pigmentos orgánicos y pigmentos negros de carbón. Al hacerlo, este producto tiene un efecto impresionante y efectivo en reducción de viscosidad, al tiempo que reduce el comportamiento de flujo tixotrópico. Vea Menos | |
| FR50 | Sino-American Pigment Systems, Inc. | FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...Vea Mas FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 50 and 52 degrees Celsius. Vea Menos | |
| FR52 | Sino-American Pigment Systems, Inc. | FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...Vea Mas FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 52 and 54 degrees Celsius. Vea Menos | |
| FR54 | Sino-American Pigment Systems, Inc. | FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...Vea Mas FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 54 and 56 degrees Celsius. Vea Menos | |
| FR56 | Sino-American Pigment Systems, Inc. | FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...Vea Mas FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 56 and 58 degrees Celsius. Vea Menos | |
| FR58 | Sino-American Pigment Systems, Inc. | FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...Vea Mas FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 58 and 60 degrees Celsius. Vea Menos | |
| FR60 | Sino-American Pigment Systems, Inc. | FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...Vea Mas FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 60 and 62 degrees Celsius. Vea Menos | |
| FR62 | Sino-American Pigment Systems, Inc. | FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...Vea Mas FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 62 and 64 degrees Celsius. Vea Menos | |
| FR64 | Sino-American Pigment Systems, Inc. | FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...Vea Mas FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 64 and 66 degrees Celsius. Vea Menos | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...Vea Mas Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. Vea Menos | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...Vea Mas Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. Vea Menos | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...Vea Mas Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. Vea Menos | |
| Hakuenka® CCR-S10 | Shiraishi-Omya GmbH | Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning ch...Vea Mas Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning characteristic is the objective. It promotes high yield values and remarkable flowability of the finished product at the same time. Hakuenka® CCR-S10 improves sag and slump resistance and renders reinforcing properties. In printing inks Hakuenka® CCR-S10 is used as a mineral additive. Vea Menos | |
| HB-139 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, an...Vea Mas HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, and adhesives & sealants. Vea Menos | |
| HB-615 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...Vea Mas HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. Vea Menos | |
| HB-620 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...Vea Mas HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. Vea Menos |
