| DOWSIL™ 402LS Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a f...Vea Mas DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a favorable environmental and health profile: it contains no solvent, no benzene, toluene, xylene, and meets European food contact regulations. Vea Menos | |
| TEGO® Dispers 717 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 717 W is an anionic wetting and dispersing additive for waterborne formulations. It combines very good viscosity reduction when used with inorganic pigments and enhanced compatibility of tinted paints. | Request Sample |
| TEGO® Dispers 711 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 711 W is an anionic wetting and dispersing additive for waterborne formulations. It is especially suitable for inorganic pigments and fillers and combines very good viscosity reduction with enhanced colorant acceptance. | Request Sample |
| TEGO® Dispers 712 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 712 W is an anionic wetting and dispersing additive for waterborne formulations. It is especially suitable for inorganic pigments and fillers and combines very good viscosity reduction with enhanced colorant acceptance. | Request Sample |
| BYK-3568 | BYK 毕克 | BYK-3568 is a surface-active additive to improve leveling and increase the surface energy of solvent-borne, 100 %, and UV systems, with a medium reduction in surface tension and a medium increase in surface slip. | |
| ZetaSperse® 175 | Evonik Operations GmbH, BL Coating Additives | ZETASPERSE® 175 is a non-ionic wetting and dispersing additive with focus on pigment wetting. It shows outstanding color strength development when used as a co-dispersant to an anionic polymer. It improves color acceptance when used in the direct grind of...Vea Mas ZETASPERSE® 175 is a non-ionic wetting and dispersing additive with focus on pigment wetting. It shows outstanding color strength development when used as a co-dispersant to an anionic polymer. It improves color acceptance when used in the direct grind of a base paint. Vea Menos | Request Sample |
| GENOMER* 3457 | Rahn AG | GENOMER* 3457 is a moderate viscosity product with high reactivity, good scratch and solvent resistance, medium flexibility and excellent adhesion to a variety of substrates. It is recommended for coatings for wood, paper, metal and plastics; inks and varnishes, industrial coatings and adhesives, and additive...Vea Mas GENOMER* 3457 is a moderate viscosity product with high reactivity, good scratch and solvent resistance, medium flexibility and excellent adhesion to a variety of substrates. It is recommended for coatings for wood, paper, metal and plastics; inks and varnishes, industrial coatings and adhesives, and additive manufacturing applications. Vea Menos | Request Sample |
| KEPERSURF®-157 | Kito Chem | KEPERSURF®-157 is a flatting and leveling agent made of and acrylate copolymer. It is a colorless liquid that can impart good heat stability and compatibility with most systems. This additive is suitable to be used in the production of solvent bright pain...Vea Mas KEPERSURF®-157 is a flatting and leveling agent made of and acrylate copolymer. It is a colorless liquid that can impart good heat stability and compatibility with most systems. This additive is suitable to be used in the production of solvent bright paints, wood and industrial paints where large area mirror leveling are key. Vea Menos | |
| KEPERSURF®-156 | Kito Chem | KEPERSURF®-156 is a flatting and leveling agent made of and acrylate copolymer. It is a colorless liquid that can impart good heat stability and compatibility with most systems. This additive is suitable to be used in the production of solvent bright pain...Vea Mas KEPERSURF®-156 is a flatting and leveling agent made of and acrylate copolymer. It is a colorless liquid that can impart good heat stability and compatibility with most systems. This additive is suitable to be used in the production of solvent bright paints, wood and industrial paints where large area mirror leveling are key. Vea Menos | |
| KEPERSURF®-154 | Kito Chem | KEPERSURF®-154 is a flatting and leveling agent made of and acrylate copolymer. It is a colorless liquid that can impart good heat stability and compatibility with most systems. This additive is suitable to be used in the production of solvent bright pain...Vea Mas KEPERSURF®-154 is a flatting and leveling agent made of and acrylate copolymer. It is a colorless liquid that can impart good heat stability and compatibility with most systems. This additive is suitable to be used in the production of solvent bright paints, wood and industrial paints where large area mirror leveling are key. Vea Menos | |
| KEPERSURF®-155 | Kito Chem | KEPERSURF®-155 is a flatting and leveling agent made of and acrylate copolymer. It is a colorless liquid that can impart good heat stability and compatibility with most systems. This additive is suitable to be used in the production of solvent bright pain...Vea Mas KEPERSURF®-155 is a flatting and leveling agent made of and acrylate copolymer. It is a colorless liquid that can impart good heat stability and compatibility with most systems. This additive is suitable to be used in the production of solvent bright paints, wood and industrial paints where large area mirror leveling are key. Vea Menos | |
| KEPERRHE®-422 | Kito Chem | KEPERRHE®-422 is a liquid rheological agent made of a high polymer modified polyurea solution. It is a yellowish viscous liquid that has good compatibility can be used in crylic acid, alcohol acid, polyester, amino and many other solvent systems. This additive...Vea Mas KEPERRHE®-422 is a liquid rheological agent made of a high polymer modified polyurea solution. It is a yellowish viscous liquid that has good compatibility can be used in crylic acid, alcohol acid, polyester, amino and many other solvent systems. This additive is suitable to be used in varnish, pigment coating and metallic flashing paint. Vea Menos | |
| KEPERPOL®-741 | Kito Chem | KEPERPOL®-741 is a high compatibility silicone defoaming agent made of a fluorocarbon modified polysilixoane solution. It is a colorless transparent liquid with good foam inhibition and breaking performance in production, packing and application. This additive...Vea Mas KEPERPOL®-741 is a high compatibility silicone defoaming agent made of a fluorocarbon modified polysilixoane solution. It is a colorless transparent liquid with good foam inhibition and breaking performance in production, packing and application. This additive is well suited for use in the production of in high gloss finishing paints, varnishes, and printing inks. Vea Menos | |
| HOMAPU™ 603-1 | Kito Chem | HOMAPU™ 603-1 is a water-based polymer made of a modified organic fluorine-silicone polyurethane dispersion. It is a slightly white liquid designed for applications on a wide variety of substrates including glass, ceramic, wood, liu rattan bamboo products. This additive...Vea Mas HOMAPU™ 603-1 is a water-based polymer made of a modified organic fluorine-silicone polyurethane dispersion. It is a slightly white liquid designed for applications on a wide variety of substrates including glass, ceramic, wood, liu rattan bamboo products. This additive is well suited for use in the production of paints and coatings. Vea Menos | |
| KEPERSURF®-W11 | Kito Chem | KEPERSURF®-W11 is a mulch-purpose additive for use as a flatting, leveling and slipping agent. It is made of a polyamides wax that is a milky white solid. It has excellent dispersion properties and is temperature resistant. This product is particularly su...Vea Mas KEPERSURF®-W11 is a mulch-purpose additive for use as a flatting, leveling and slipping agent. It is made of a polyamides wax that is a milky white solid. It has excellent dispersion properties and is temperature resistant. This product is particularly suitable to be used in PU finish, like matte varnish and matte white finishes. Vea Menos | |
| KEPERSURF®-159 | Kito Chem | KEPERSURF®-159 is a flatting and leveling agent made of an acrylate copolymer. It is a colorless liquid which can impart heat stability and improved compatibility with most systems. It is well suited for use as an additive in the production of wood ware p...Vea Mas KEPERSURF®-159 is a flatting and leveling agent made of an acrylate copolymer. It is a colorless liquid which can impart heat stability and improved compatibility with most systems. It is well suited for use as an additive in the production of wood ware paints and industrial paints where long wave flow and mirror leveling are key. Vea Menos | |
| KEPERRHE®-421 | Kito Chem | KEPERRHE®-421 is a liquid rheological agent made of a polymer contained amine and acid groups solution. It is a yellowish transparent liquid that has good compatibility can be used in crylic acid, alcohol acid, polyester, amino and many other solvent systems. This additive...Vea Mas KEPERRHE®-421 is a liquid rheological agent made of a polymer contained amine and acid groups solution. It is a yellowish transparent liquid that has good compatibility can be used in crylic acid, alcohol acid, polyester, amino and many other solvent systems. This additive is suitable to be used in varnish, pigment coating and metallic finishing paint. Vea Menos | |
| KEPERSURF®-198 | Kito Chem | KEPERSURF®-198 is a water-based flatting and leveling agent made of a plyether modified polysiloxane solution. it is a colorless to yellowish liquid that can promote good flow, wetting and viscosity in a variety of formulations where improved ant-float and anti-flooding are key. This additive...Vea Mas KEPERSURF®-198 is a water-based flatting and leveling agent made of a plyether modified polysiloxane solution. it is a colorless to yellowish liquid that can promote good flow, wetting and viscosity in a variety of formulations where improved ant-float and anti-flooding are key. This additive is well suited for use in the production of water-based paints and varnishes. Vea Menos | |
| KEPERSURF®-1745 | Kito Chem | KEPERSURF®-1745 is a water-based flatting and leveling agent made of a plyether modified polysiloxane solution. it is a colorless to yellowish liquid that can promote good flow, wetting and viscosity in a variety of formulations where improved ant-float and anti-flooding are key. This additive...Vea Mas KEPERSURF®-1745 is a water-based flatting and leveling agent made of a plyether modified polysiloxane solution. it is a colorless to yellowish liquid that can promote good flow, wetting and viscosity in a variety of formulations where improved ant-float and anti-flooding are key. This additive is well suited for use in the production of water-based paints and varnishes. Vea Menos | |
| KEPERSURF®-1610 | Kito Chem | KEPERSURF®-1610 is a flatting and leveling agent made of a phosphate modified polyacrylate solution. It is a colorless liquid with excellent leveling and anti-cratering properties. It has few side effects with good recoatablity when compared to other organosilicone products. This additive...Vea Mas KEPERSURF®-1610 is a flatting and leveling agent made of a phosphate modified polyacrylate solution. It is a colorless liquid with excellent leveling and anti-cratering properties. It has few side effects with good recoatablity when compared to other organosilicone products. This additive is well suited for use in the production of paints and varnishes and compatible in all kinds of resin systems. Vea Menos | |
| KEPERSURF®-168 | Kito Chem | KEPERSURF®-168 is a flatting and leveling agent made of a fluorocarbon modified polyacrylate solution. It is a colorless liquid that can adjust surface tension and improve wetting and dispersion of most pigments with improved extinction powder orientation in matte systems. It has a natural foam inhibition properties and can improve the film deaeration. This additive...Vea Mas KEPERSURF®-168 is a flatting and leveling agent made of a fluorocarbon modified polyacrylate solution. It is a colorless liquid that can adjust surface tension and improve wetting and dispersion of most pigments with improved extinction powder orientation in matte systems. It has a natural foam inhibition properties and can improve the film deaeration. This additive is well suited for use in water-based systems in the production of wood paints and varnishes. Vea Menos | |
| KEPERSURF®-177 | Kito Chem | KEPERSURF®-177 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless to yellowish liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive...Vea Mas KEPERSURF®-177 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless to yellowish liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive is well suited for use in the production of wood paints and varnishes. Vea Menos | |
| KEPERSURF®-195 | Kito Chem | KEPERSURF®-195 is a flatting and leveling agent made of polyether modified polysiloxane solution. It can impart a very high surface tension reduction to most formulations. This additive can be used in water-based, oiliness and UV system with few side effe...Vea Mas KEPERSURF®-195 is a flatting and leveling agent made of polyether modified polysiloxane solution. It can impart a very high surface tension reduction to most formulations. This additive can be used in water-based, oiliness and UV system with few side effects, even under the large dosage. It is well suited for use in the production of Wood, industrial, automotive and UV paints, as well as printing inks and water-based printing. Vea Menos | |
| KEPER®-335 | Kito Chem | KEPER®-335 is a sanding agent of water-based paints made of a zinc stearate solution. It is a colorless to yellowish transparent liquid that can suspend particles with an appropriate flowing and thixotropy properties. In addition, it can also be used to improve drying speeds and dispersion with very little effect on the viscosity of most formulations. This additive...Vea Mas KEPER®-335 is a sanding agent of water-based paints made of a zinc stearate solution. It is a colorless to yellowish transparent liquid that can suspend particles with an appropriate flowing and thixotropy properties. In addition, it can also be used to improve drying speeds and dispersion with very little effect on the viscosity of most formulations. This additive is well suited for use in the production of water-based paints and especial for water-based wood paints. Vea Menos | |
| KEPERSURF®-389 | Kito Chem | KEPERSURF®-389 is a water-based flatting and leveling agent made of a polyrcylate copolymer. It is a colorless liquid that can be used to adjust the surface tension and improve wetting of the substrate. It can be used to improve the liquidity and spreadability, increasing the gloss and helping the dispersion of the pigment in most formulations. This additive...Vea Mas KEPERSURF®-389 is a water-based flatting and leveling agent made of a polyrcylate copolymer. It is a colorless liquid that can be used to adjust the surface tension and improve wetting of the substrate. It can be used to improve the liquidity and spreadability, increasing the gloss and helping the dispersion of the pigment in most formulations. This additive is well suited for use in the production of paints, varnishes and water-based printing inks. Vea Menos | |
| KEPERSURF®-170 | Kito Chem | KEPERSURF®-170 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive...Vea Mas KEPERSURF®-170 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive is well suited for use in the production of wood and industrial paints as well as printing inks. Vea Menos | |
| KEPERSURF®-1705 | Kito Chem | KEPERSURF®-1705 is a multifunctional additive that can impart good flatting and leveling with good handling, peel and permanent dry effects. It is a yellowish transparent oily liquid made of a polyether modified hydroxyl of a polysiloxane solution. It can...Vea Mas KEPERSURF®-1705 is a multifunctional additive that can impart good flatting and leveling with good handling, peel and permanent dry effects. It is a yellowish transparent oily liquid made of a polyether modified hydroxyl of a polysiloxane solution. It can be used to improve the soft feel in the elastic of most coating systems. This product can be used in the production of leather release and finishing agents as well as in industrial and wood paints. Vea Menos | |
| KEPERSURF®-173 | Kito Chem | KEPERSURF®-173 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive...Vea Mas KEPERSURF®-173 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive is well suited for use in the production of wood and industrial paints as well as printing inks. Vea Menos | |
| KEPERSURF®-175 | Kito Chem | KEPERSURF®-175 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive...Vea Mas KEPERSURF®-175 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive is well suited for use in the production of wood and industrial paints as well as printing inks. Vea Menos | |
| KEPERSURF®-172 | Kito Chem | KEPERSURF®-172 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive...Vea Mas KEPERSURF®-172 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive is well suited for use in the production of wood and industrial paints as well as printing inks. Vea Menos | |
| DOUBLEMER® 186 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | DOUBLEMER® 186 is a soya oil epoxidized acrylate oligomer. This resin is characterized by fast cure, excellent flow and leveling. It could be used as a minor component or as an additive used in clear or pigmented UV/EB coatings for improving their pigment...Vea Mas DOUBLEMER® 186 is a soya oil epoxidized acrylate oligomer. This resin is characterized by fast cure, excellent flow and leveling. It could be used as a minor component or as an additive used in clear or pigmented UV/EB coatings for improving their pigment wetting, leveling and adhesion. This product is recommended for use in: clear coatings for paper, overprint varnishes, wood top coat with smooth surface, ink binder with good wetting property and adhesive applications. Vea Menos | |
| GENOMER* 4690 | Rahn AG | GENOMER* 4690 is a hexafunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. It can be used as an additive to improve cure speed, solvent resistance and abrasion resistance. GENOMER* 4690 is recommended for systems whe...Vea Mas GENOMER* 4690 is a hexafunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. It can be used as an additive to improve cure speed, solvent resistance and abrasion resistance. GENOMER* 4690 is recommended for systems where outstanding hardness, scratch and abrasion resistance, chemical resistance, and low yellowing are required. This product is specifically recommended for use in the following applications: hard coats on plastic; top coats on wood; and coatings on paper, board, wood and plastics. Vea Menos | Request Sample |
| KEPERSURF®-386 | Kito Chem | KEPERSURF®-386 is a water-based flatting and leveling agent made of a fluorocarbon modified polyacrylate solution. It is a colorless liquid that can adjust surface tension and improve wetting and dispersion of most pigments without interfering with the inner-coat adhesion. It has a natural foam inhibition properties and can improve the film deaeration. This additive...Vea Mas KEPERSURF®-386 is a water-based flatting and leveling agent made of a fluorocarbon modified polyacrylate solution. It is a colorless liquid that can adjust surface tension and improve wetting and dispersion of most pigments without interfering with the inner-coat adhesion. It has a natural foam inhibition properties and can improve the film deaeration. This additive is well suited for use in water-based systems in the production of wood and industrial paints as well as water-based printing inks. Vea Menos | |
| KEPERSURF®-193 | Kito Chem | KEPERSURF®-193 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive...Vea Mas KEPERSURF®-193 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive is well suited for use in the production of wood, industrial and automotive paints and coatings as well as water-based printing inks. Vea Menos | |
| KEPERSURF®-191 | Kito Chem | KEPERSURF®-191 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive...Vea Mas KEPERSURF®-191 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive is well suited for use in the production of wood, industrial and automotive paints and coatings as well as water-based printing inks. Vea Menos | |
| KEPERSURF®-176 | Kito Chem | KEPERSURF®-176 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive...Vea Mas KEPERSURF®-176 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive is well suited for use in the production of wood and industrial paints as well as solvent type UV paints. Vea Menos | |
| KEPERSURF®-176H | Kito Chem | KEPERSURF®-176H is a flatting and leveling agent made of a polyether modified polysiloxane solution without benzene. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive...Vea Mas KEPERSURF®-176H is a flatting and leveling agent made of a polyether modified polysiloxane solution without benzene. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive is well suited for use in the production of wood and industrial paints as well as solvent type UV paints. Vea Menos | |
| KEPERSURF®-179 | Kito Chem | KEPERSURF®-179 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless to yellowish liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive...Vea Mas KEPERSURF®-179 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless to yellowish liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive is well suited for use in the production of wood, industrial and automotive paints and coatings as well as epoxy floor leveling paints. Vea Menos | |
| RILSAN® D30 NAT | Arkema 阿科玛 | RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...Vea Mas RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 21-27µm. Vea Menos | |
| RILSAN® D40 NAT | Arkema 阿科玛 | RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...Vea Mas RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 27-31µm. Vea Menos | |
| RILSAN® D50 NAT | Arkema 阿科玛 | RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...Vea Mas RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 40-46µm. Vea Menos | |
| RILSAN® D60 NAT | Arkema 阿科玛 | RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...Vea Mas RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 43-55µm. Vea Menos | |
| RILSAN® D80 NAT | Arkema 阿科玛 | RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...Vea Mas RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 95-105µm. Vea Menos | |
| Ultrafine™ 1000 A | Lawter | Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and c...Vea Mas Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and create uniformity during processing. Ultrafine™ 1000 A is used in solvent and water-based flexographic and gravure inks, in sheet-fed, UV and metal deco applications and in wood, can, coil and powder coatings. Vea Menos | |
| Ultrafine™ 1WLS A | Lawter | Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve perfor...Vea Mas Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve performance. Ultrafine™ 1WLS A is used in UV, metal deco and overprint varnishes, in heatset and sheet-fed inks and in can, coil and wood powder coatings. Vea Menos | |
| ORGASOL® 1002 ES5 NAT 1 | Arkema 阿科玛 | ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...Vea Mas ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. Vea Menos | |
| ORGASOL® 2002 D NAT 1 | Arkema 阿科玛 | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...Vea Mas ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. Vea Menos | |
| ORGASOL® 2002 ES3 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...Vea Mas ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. Vea Menos | |
| ORGASOL® 2002 ES4 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...Vea Mas ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. Vea Menos | |
| ORGASOL® 2002 ES5 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...Vea Mas ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. Vea Menos | |
| ORGASOL® 2002 ES6 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...Vea Mas ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. Vea Menos | |
| ORGASOL® 3501 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...Vea Mas ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. Vea Menos | |
| ORGASOL® 2002 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...Vea Mas ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). Vea Menos | |
| ORGASOL® 2001 UD NAT 2 | Arkema 阿科玛 | ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...Vea Mas ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). Vea Menos | |
| ORGASOL® 2001 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...Vea Mas ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Vea Menos | |
| ORGASOL® 2001 UD NAT 1 | Arkema 阿科玛 | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...Vea Mas ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Vea Menos | |
| ORGASOL® 1002 D NAT 1 | Arkema 阿科玛 | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...Vea Mas ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. Vea Menos | |
| ORGASOL® 3502 D NAT 1 | Arkema 阿科玛 | ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...Vea Mas ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. Vea Menos | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...Vea Mas CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. Vea Menos | |
| KEPERSURF®-1220 | Kito Chem | KEPERSURF®-1220 is a leveler, flatting and wetting agent made of a modified phosphate. It is a colorless to yellowish transparent liquid that can be used in solvent, solvent-free, water-based and UV coating systems. It is well suited for use in the produc...Vea Mas KEPERSURF®-1220 is a leveler, flatting and wetting agent made of a modified phosphate. It is a colorless to yellowish transparent liquid that can be used in solvent, solvent-free, water-based and UV coating systems. It is well suited for use in the production of exterior wood paints where weather proofing is needed. Vea Menos | |
| BENCRYL PU 141 | Benasedo | BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition o...Vea Mas BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition of photoinitiators whit small amounts of photoactivator (acrylated amine) Vea Menos | |
| EBECRYL® 225 | Allnex | EBECRYL® 225 is a ten functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 225 exhibit outstanding surface hardness and low haze development after abrasion. In addition, EBECRYL® 225 does not contain intentionally added organic ...Vea Mas EBECRYL® 225 is a ten functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 225 exhibit outstanding surface hardness and low haze development after abrasion. In addition, EBECRYL® 225 does not contain intentionally added organic tin compounds, heavy metals or quinones. Vea Menos | Request Sample |
| GENOMER* 3430 | Rahn AG | GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured w...Vea Mas GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. Vea Menos | Request Sample |
| GENOMER* 4514 | Rahn AG | GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and...Vea Mas GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. Vea Menos | Request Sample |
| KEPERSURF®-415 | Kito Chem | KEPERSURF®-415 is a slipping and smoothing agent made of polyamides wax. It is a colorless to yellowish transparent clear liquid which can be used to improve the hardness and scratch resistance of most formulations. This product is well suited for use in ...Vea Mas KEPERSURF®-415 is a slipping and smoothing agent made of polyamides wax. It is a colorless to yellowish transparent clear liquid which can be used to improve the hardness and scratch resistance of most formulations. This product is well suited for use in the production of solvent based matte finishes, particularly with PU, wood and spray paints. Vea Menos | |
| TEGO® VariPlus CA N | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus CA N shows excellent viscosity reduction and helps accelerate the drying speed. It provides very good adhesion on metal combined with high gloss and good weather resistance. | Request Sample |
| Venadol™ 40 | Harcros Chemicals, Inc. | Venadol™ 40 is a non-foaming wetting agent with a unique structure that allows multi-functional properties which include the following: foam control, increased wetting and reduction in surface tension. These various properties allow Venadol™ 40 to be util...Vea Mas Venadol™ 40 is a non-foaming wetting agent with a unique structure that allows multi-functional properties which include the following: foam control, increased wetting and reduction in surface tension. These various properties allow Venadol™ 40 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. Vea Menos | |
| Venadol™ 65 | Harcros Chemicals, Inc. | Venadol™ 65 is a low foaming wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is...Vea Mas Venadol™ 65 is a low foaming wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. Vea Menos | |
| Venadol™ 85 | Harcros Chemicals, Inc. | Venadol™ 85 is an effective wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is ...Vea Mas Venadol™ 85 is an effective wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. Vea Menos | |
| KEPERSURF®-197 | Kito Chem | KEPERSURF®-197 is a flatting and leveling agent made of a polyether modified polysiloxane solution. it is a colorless to yellowish liquid with good wetting, anti-crater and high slip properties and improved anti-blocking capabilities. It is well suited fo...Vea Mas KEPERSURF®-197 is a flatting and leveling agent made of a polyether modified polysiloxane solution. it is a colorless to yellowish liquid with good wetting, anti-crater and high slip properties and improved anti-blocking capabilities. It is well suited for use in the production of varnishes and matted paints where high solid content and extinction powder orientation are a concern. Vea Menos | |
| KEPERRHE®-400 | Kito Chem | KEPERRHE®-400 is an anti-setting and anti-sagging agent made of a polyamide wax. It is a white to yellowish powder that can dissolve in some hydrocarbon under higher temperatures. It can improve the consistence rapidly when apply to the heavy-duty anti-co...Vea Mas KEPERRHE®-400 is an anti-setting and anti-sagging agent made of a polyamide wax. It is a white to yellowish powder that can dissolve in some hydrocarbon under higher temperatures. It can improve the consistence rapidly when apply to the heavy-duty anti-corrosive coatings. And achieve anti-sagging even in the extremely impasto. It is suitable for use in the production of solvent type wood paint, industry paint, heavy-duty anti-corrosive coatings. Vea Menos | |
| Domalkyd 0545 40 Wa | HELIOS RESINS | Domalkyd 0545 40 Wa is a PU-modified alkyd emulsion without organic solvents designed for yellowing-resistant top coats and one coat paints for industrial application on wood, steel, and aluminum with excellent gloss retention and elasticity. The bio-base...Vea Mas Domalkyd 0545 40 Wa is a PU-modified alkyd emulsion without organic solvents designed for yellowing-resistant top coats and one coat paints for industrial application on wood, steel, and aluminum with excellent gloss retention and elasticity. The bio-based content is 60% (47% of the dry matter by the Carbon-14 method and an additional 13% via a biomass balance approach as certified by the ISCC PLUS). Vea Menos | |
| Venadol™ 104 | Harcros Chemicals, Inc. | Venadol™ 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol...Vea Mas Venadol™ 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. Vea Menos | |
| Venadol™ 104BC | Harcros Chemicals, Inc. | Venadol™ 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...Vea Mas Venadol™ 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104BC to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. Vea Menos | |
| Venadol™ 104DPM | Harcros Chemicals, Inc. | Venadol™ 104DPM is a 50% active surface-active agent in Dipropylene glycol monomethyl ether with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilizati...Vea Mas Venadol™ 104DPM is a 50% active surface-active agent in Dipropylene glycol monomethyl ether with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104DPM to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. Vea Menos | |
| Venadol™ 104E | Harcros Chemicals, Inc. | Venadol™ 104E is a 50% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...Vea Mas Venadol™ 104E is a 50% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104E to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. Vea Menos | |
| Venadol™ 104H | Harcros Chemicals, Inc. | Venadol™ 104H is a 75% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...Vea Mas Venadol™ 104H is a 75% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104H to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. Vea Menos | |
| Venadol™ 104PA | Harcros Chemicals, Inc. | Venadol™ 104PA is a 50% active surface-active agent in 2-propanol(IPA) with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various pro...Vea Mas Venadol™ 104PA is a 50% active surface-active agent in 2-propanol(IPA) with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104PA to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. Vea Menos | |
| Venadol™ 104 PG50 | Harcros Chemicals, Inc. | Venadol™ 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various...Vea Mas Venadol™ 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104 PG50 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. Vea Menos | |
| Venadol™ 20 | Harcros Chemicals, Inc. | Venadol™ 20 is an effective wetting agent and molecular deofamer that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubri...Vea Mas Venadol™ 20 is an effective wetting agent and molecular deofamer that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. Vea Menos | |
| KEPERSURF®-388 | Kito Chem | KEPERSURF®-388 is a water-based non-silicone leveling agent made of a low molecular weight polymer compound. It is a colorless to light yellow transparent liquid that is formulated to help prevent the bubble burst (pinhole problem) in the drying process o...Vea Mas KEPERSURF®-388 is a water-based non-silicone leveling agent made of a low molecular weight polymer compound. It is a colorless to light yellow transparent liquid that is formulated to help prevent the bubble burst (pinhole problem) in the drying process of most water-born industrial paints. This product is well suited for use in the production of water-based wood, industrial and automotive paints. Vea Menos | |
| KEPERSURF®-382 | Kito Chem | KEPERSURF®-382 is a water-based non-silicone leveling agent made of a a non-ionic acrylate copolymer solution. It is a colorless to light yellow transparent liquid that is suitable for use in the production of industrial paints. It has good flow-promoting...Vea Mas KEPERSURF®-382 is a water-based non-silicone leveling agent made of a a non-ionic acrylate copolymer solution. It is a colorless to light yellow transparent liquid that is suitable for use in the production of industrial paints. It has good flow-promoting properties and can solve cratering problems caused by poor substrate wetting. It is commonly used in water-based coating systems for the manufacturing of water-based wood, industrial and automotive paints. Vea Menos | |
| KEPERSURF®-381 | Kito Chem | KEPERSURF®-381 is a water-based non-silicone leveling agent made of an ancrylate copolymer solution. It is a colorless to light yellow transparent liquid that is suitable for use in the production of water-based wood, industrial and automotive paints. It ...Vea Mas KEPERSURF®-381 is a water-based non-silicone leveling agent made of an ancrylate copolymer solution. It is a colorless to light yellow transparent liquid that is suitable for use in the production of water-based wood, industrial and automotive paints. It can be used to reduce the surface tension of the substrate, increasing the wetting property and promoting mobility while reducing shrinkage. Vea Menos | |
| WorléeSol NW 474 | Worlée-Chemie G.m.b.H. | Una amina de petróleo larga y co-solvente en emulsión alquídica libre. | |
| KEPERSURF®-194 | Kito Chem | KEPERSURF®-194 is a flatting and leveling agent made of a polyether modified polysiloxane solution. it is a colorless to yellowish liquid with good wetting, anti-crater and high slip properties and improved anti-blocking capabilities. It is well suited fo...Vea Mas KEPERSURF®-194 is a flatting and leveling agent made of a polyether modified polysiloxane solution. it is a colorless to yellowish liquid with good wetting, anti-crater and high slip properties and improved anti-blocking capabilities. It is well suited for use in the production of printing Inks, varnishes and matted paints where high solid content and extinction powder orientation are a concern. Vea Menos | |
| WorléeSol E 927 W | Worlée-Chemie G.m.b.H. | WorléeSol E 927 W es una emulsión alquídica PU de aceite corto para la fabricación de sistemas de pintura diluibles en agua de secado al aire. Este grado tiene un contenido no volátil del 40% ± 2. W´Sol E 927 W se usa principalmente para la producción de ...Vea Mas WorléeSol E 927 W es una emulsión alquídica PU de aceite corto para la fabricación de sistemas de pintura diluibles en agua de secado al aire. Este grado tiene un contenido no volátil del 40% ± 2. W´Sol E 927 W se usa principalmente para la producción de lacas diluibles en agua para madera con excelente secado y dureza incluso sin la adición de un cosecante. W´Sol E 927 W también muestra buena compatibilidad con dispersiones acrílicas. Vea Menos | |
| Polurene MT 100 | S.A.P.I.C.I. SpA | Polurene MT 100 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanates. | |
| Tohmide RS-640 | Sanho Chemical Co., Ltd. | Tohmide RS-640 is a high viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 10,000-14,000 mPa.s and a specific gravity of 0.96. Tohmide RS-640 is most commonly used in wood adhesive formulation a...Vea Mas Tohmide RS-640 is a high viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 10,000-14,000 mPa.s and a specific gravity of 0.96. Tohmide RS-640 is most commonly used in wood adhesive formulation applications. Vea Menos | |
| R4-1140 | NuSil Silicone Technology 1 | R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wo...Vea Mas R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wood, painted surfaces, many plastics and other silicone rubbers. Vea Menos | |
| Hydrorene 10 | S.A.P.I.C.I. SpA | Hydrorene 10 is a water-dispersible isocyanate. This product can be mixed with acrylic emulsions and polyurethane dispersion waterborne systems. It can be used as a hardener for 2K waterborne coatings with good chemical and abrasion resistance. | |
| Cycure TPO | Guangzhou Baohui Resin Co., Ltd. | Cycure TPO is a free radical type I solid photo-initiator appearing as a light yellow solid. It is used to initiate the UV polymerization of styrene-based unsaturated polyesters and acrylic resins. Cycure TPO finds application in pigmented, white, and woo...Vea Mas Cycure TPO is a free radical type I solid photo-initiator appearing as a light yellow solid. It is used to initiate the UV polymerization of styrene-based unsaturated polyesters and acrylic resins. Cycure TPO finds application in pigmented, white, and wood coatings, white paints, screen inks, flexo inks, overprint varnishes, and thick film layers requiring low yellowing and low odor. Vea Menos | |
| KEPERPOL®-752 | Kito Chem | KEPERPOL®-752 is a defoamers for solvent-based and solvent-free coating systems. Made of polyolefin, it comes as a colorless to light yellow transparent liquid. Particularly suitable for defoaming in solvent-based and solvent-free UV coating, excellent su...Vea Mas KEPERPOL®-752 is a defoamers for solvent-based and solvent-free coating systems. Made of polyolefin, it comes as a colorless to light yellow transparent liquid. Particularly suitable for defoaming in solvent-based and solvent-free UV coating, excellent suds suppressing properties and deaerated. It can be used in the production of varnishes, inks and coatings using aliphatic hydrocarbon solvent. Vea Menos | |
| Polurene AC510 | S.A.P.I.C.I. SpA | Polurene AC510 is an aromatic isocyanurate. This product is highly compatible with nitrocellulose, aromatic solvents, saturated polyesters, hydroxide acrylic and vinyl resins. It can be used in sealers and topcoats for wood, metal and paper. This produ...Vea Mas Polurene AC510 is an aromatic isocyanurate. This product is highly compatible with nitrocellulose, aromatic solvents, saturated polyesters, hydroxide acrylic and vinyl resins. It can be used in sealers and topcoats for wood, metal and paper. This product contains less than .7% TDI isocyanates. Vea Menos | |
| Photo Initiator-184A | Guangzhou Baohui Resin Co., Ltd. | Photo Initiator-184A alpha-cleavage type photo initiator appearing as a white to off white powder. Features include high photo speed, storage life extension, and non-yellowing and low-irritating properties. Photo Initiator-184A finds application in clear ...Vea Mas Photo Initiator-184A alpha-cleavage type photo initiator appearing as a white to off white powder. Features include high photo speed, storage life extension, and non-yellowing and low-irritating properties. Photo Initiator-184A finds application in clear coatings used for paper, flooring, metal, plastic, and wood. Vea Menos | |
| TEGO® Protect 5001 | Evonik Operations GmbH, BL Coating Additives | TEGO® Protect 5001 is a hydroxy-functional silicone polyacrylate. | Request Sample |
| DAPRO® DF 696 | Elementis 海名斯特殊化学 | DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696...Vea Mas DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696 works effectively in various water- based inks and coatings applications. It is easy to incorporate and disperses well into a wide range of formulations with excellent performance. Vea Menos | Request Sample |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...Vea Mas SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. Vea Menos | |
| BYK-1616 | BYK 毕克 | BYK-1616 is a silicone-containing defoamer for aqueous printing inks and overprint varnishes, as well as aqueous wood and furniture coatings and general industrial coatings. | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...Vea Mas SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. Vea Menos | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...Vea Mas SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. Vea Menos |
