| ADDITOL® P 824 | Allnex | ADDITOL® P 824 is a 15% active flow promoter masterbatch on an outdoor resistant hydroxylated polyester matrix that can be used in the manufacture of powder coatings. An addition of 3-5%, by weight to a powder coating formulation increases gloss and is co...view more ADDITOL® P 824 is a 15% active flow promoter masterbatch on an outdoor resistant hydroxylated polyester matrix that can be used in the manufacture of powder coatings. An addition of 3-5%, by weight to a powder coating formulation increases gloss and is compatible with nearly all powder coating systems. view less | Request Sample |
| VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation...view more VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. view less | Request Sample |
| CYMEL® 1161 | Allnex | CYMEL® 1161 resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibili...view more CYMEL® 1161 resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibility. It is especially recommended for automotive topcoats, general metal finishes, and coil coatings. view less | Request Sample |
| Boltorn™ P1000 | Perstorp | Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used ...view more Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used as acrylate oligomer for UV-curing where labelling issues are of prime importance. view less | |
| SETAL® 12-1646 | Allnex | SETAL® 12-1646 is a fast drying rosin and phenolic modified alkyd for use in the formulation of primers which have exceptionally good resistance to corrosion and lifting by subsequent topcoats. SETAL® 12-1646 meets the resin requirement of Federal Paint S...view more SETAL® 12-1646 is a fast drying rosin and phenolic modified alkyd for use in the formulation of primers which have exceptionally good resistance to corrosion and lifting by subsequent topcoats. SETAL® 12-1646 meets the resin requirement of Federal Paint Specification TT-P-664C for rustinhibiting, lacquer resistant primer. view less | Request Sample |
| ALQUIMEX S-50T | Polimeros Sinteticos, S.A de C.V | Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requi...view more Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requirements with drying, adhesion, flexibility, abrasion, exudation and resistance to the gasoline, as well as the resistance outdoors. view less | |
| Cinergi™ 2084 A | Lawter | Cinergi™ 2084 A is a quickset gel vehicle made for a variety of applications that allow it to be used in laser form and conventional inks. The product gives the ink formulation the freedom to formulate a variety of inks from one source. It is considered i...view more Cinergi™ 2084 A is a quickset gel vehicle made for a variety of applications that allow it to be used in laser form and conventional inks. The product gives the ink formulation the freedom to formulate a variety of inks from one source. It is considered ideal for use in sheet-fed inks and laser forms. view less | |
| AMBERYL M-15B | Polimeros Sinteticos, S.A de C.V | Rosin-based manufactures (pitch) and corresponds to an adduct maleic esterified with glycerol. Specially formulated to have good compatibility with nitrocellulose dissolved in high proportion or concentration of acetone. Is mainly recommended for the formulation...view more Rosin-based manufactures (pitch) and corresponds to an adduct maleic esterified with glycerol. Specially formulated to have good compatibility with nitrocellulose dissolved in high proportion or concentration of acetone. Is mainly recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor amounts of toluene). view less | |
| TEGO® Airex 991 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 h...view more TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 has good recoatability, is highly effective, prevents micro- and macro-foam, and is used particularly for pigmented formulations. view less | Request Sample |
| SETATHANE® D E 2656 | Allnex | SETATHANE® D E 2656 is suitable for formulation of coatings and mortars with high chemical resistance for the food and beverage industries. Coatings formulated with SETATHANE® D E 2656 and a diphenylmethane based diisocyanate generally exhibit very good r...view more SETATHANE® D E 2656 is suitable for formulation of coatings and mortars with high chemical resistance for the food and beverage industries. Coatings formulated with SETATHANE® D E 2656 and a diphenylmethane based diisocyanate generally exhibit very good resistance to organic and inorganic acids, alkalis, and solvents. Over crosslinking of 500% is typical. This optimizes chemical resistance and flow. view less | Request Sample |
| ALQUIMEX SC-60X | Polimeros Sinteticos, S.A de C.V | The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in...view more The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in solution and resins of urea, and melamine, to obtain finished from greater hardness by baked systems. view less | |
| EBECRYL® 4220 | Allnex | EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA)(1). It produces tough coatings that resist yellowing. This product is designed for use in the formulation of UV/EB energy curable coatings for application...view more EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA)(1). It produces tough coatings that resist yellowing. This product is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film. view less | Request Sample |
| EBECRYL® 4666 | Allnex | EBECRYL® 4666 is a weather-stable aliphatic urethane acrylate having a relatively low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4666 exhibit high reactivity and result in hard coatings. EBECRYL® 4666 is used in the formula...view more EBECRYL® 4666 is a weather-stable aliphatic urethane acrylate having a relatively low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4666 exhibit high reactivity and result in hard coatings. EBECRYL® 4666 is used in the formulation of UV/EB energy curable coatings for wood and plastic substrates via the roller coating, spray or curtain coating processes. view less | Request Sample |
| EBECRYL® 898 | Allnex | EBECRYL® 898 is a special purpose, 100% solids tetra functional polyester acrylate that extends the matting effect of a silica containing formulation. It is characterized by extended matting effect, low viscosity, low odour, and fast cure. This product is...view more EBECRYL® 898 is a special purpose, 100% solids tetra functional polyester acrylate that extends the matting effect of a silica containing formulation. It is characterized by extended matting effect, low viscosity, low odour, and fast cure. This product is recommended for wood and plastic coatings, paper upgrading, flexographic inks, and EB cured paper-foil coatings. view less | Request Sample |
| SILVET® AD 015 | Silberline Manufacturing Co., Inc. | SILVET® AD 015 is a bright, low dusting aluminum pigment with a medium-fine, granular, corn-flake particle size. This product is designed to maximize formulation flexibility while ensuring easy dispersibility in printing ink applications. SILVET® AD 015 i...view more SILVET® AD 015 is a bright, low dusting aluminum pigment with a medium-fine, granular, corn-flake particle size. This product is designed to maximize formulation flexibility while ensuring easy dispersibility in printing ink applications. SILVET® AD 015 is especially suitable for solvent-based gravure and flexographic inks where optimal opacity and adhesion are required. view less | |
| AMBERYL MP-25 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with pentaerythritol. Soluble in aliphatic solvents, aromatic alcohols and ketones insoluble in water and. Compatible with alkyd resins, drying oils and other derivatives of rosin. Is recommended primarily for the formulation...view more Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with pentaerythritol. Soluble in aliphatic solvents, aromatic alcohols and ketones insoluble in water and. Compatible with alkyd resins, drying oils and other derivatives of rosin. Is recommended primarily for the formulation of coatings for lithography and as an additive modifier of hardness and drying. view less | |
| AMBERYL M-15 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with glycerol. Recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor a...view more Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with glycerol. Recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor amounts of toluene), as a film-forming resin in printing inks and as a component for some varnishes or alkyd paints. view less | |
| ADDID® 230 | Evonik Operations GmbH, BL Coating Additives | ADDID® 230 is a yellowish, liquid antistatic additive. It is a formulation of solid salts and quaternary nitrogen compounds. This product is used for 2-pack coatings based on epoxies and polyurethanes.. It is solvent-free and increases electric conductivi...view more ADDID® 230 is a yellowish, liquid antistatic additive. It is a formulation of solid salts and quaternary nitrogen compounds. This product is used for 2-pack coatings based on epoxies and polyurethanes.. It is solvent-free and increases electric conductivity. It also is highly suitable for clears and has very good compatibility even at high addition levels. view less | Request Sample |
| SILCOLEASE UV CATA 243 | Elkem Silicones | SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mechanism. It is also suited to the formulation...view more SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mechanism. It is also suited to the formulation of hybrid radical / cationic systems. view less | |
| EBECRYL® 4265 | Allnex | EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties. This product is designed for use in the formulation of UV/EB energy curabl...view more EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties. This product is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film. view less | Request Sample |
| CYMEL® 659 | Allnex | CYMEL® 659 resin is a partially n-butylated benzoguanamine resin supplied in n-butanol. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation...view more CYMEL® 659 resin is a partially n-butylated benzoguanamine resin supplied in n-butanol. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine resins, CYMEL® 659 is not suitable for exterior applications. view less | Request Sample |
| RESYDROL® AY 241w/40WA | Allnex | Resydrol® AY 241W/40WA is an oxidatively drying alkyd-acrylic copolymer emulsion that exhibits extremely rapid initial drying and very good water resistance. It can be used as a sole binder for the formulation of primers and primer-surfacers which are cha...view more Resydrol® AY 241W/40WA is an oxidatively drying alkyd-acrylic copolymer emulsion that exhibits extremely rapid initial drying and very good water resistance. It can be used as a sole binder for the formulation of primers and primer-surfacers which are characterized by very rapid drying and therefore can be used for recoating after a short time of drying. view less | Request Sample |
| ADDITOL® P 896 | Allnex | ADDITOL® P 896 is a flow promoter master batch suitable for use in pigmented powder coatings. It contains approximately 15% active substance in an outdoor resistant hydroxylated polyester carrier. The addition of 3-5% by weight to a powder coating formulation...view more ADDITOL® P 896 is a flow promoter master batch suitable for use in pigmented powder coatings. It contains approximately 15% active substance in an outdoor resistant hydroxylated polyester carrier. The addition of 3-5% by weight to a powder coating formulation is recommended to improve flow while maintaining good compatibility with nearly all powder coating systems. view less | Request Sample |
| UCECOAT® 7520 | Allnex | UCECOAT® 7520 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It has an excellent water release and is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCECOAT® 7520 can be used as the sole formulation...view more UCECOAT® 7520 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It has an excellent water release and is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCECOAT® 7520 can be used as the sole formulation resin or in combination with other water-borne resins. view less | Request Sample |
| EBECRYL® 4680 | Allnex | EBECRYL® 4680 is an aliphatic urethane acrylate diluted 20% by weight with 1,6-hexanediol diacrylate (HDDA)(1). It exhibits good reactivity and produces hard, tough coatings. EBECRYL® 4680 is designed for use in the formulation of UV/EB energy curable coa...view more EBECRYL® 4680 is an aliphatic urethane acrylate diluted 20% by weight with 1,6-hexanediol diacrylate (HDDA)(1). It exhibits good reactivity and produces hard, tough coatings. EBECRYL® 4680 is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet plastics and film. view less | Request Sample |
| CRYLCOAT® 4641-0 | Allnex | CRYLCOAT® 4641-0 is a superdurable, carboxylated polyester resin for the formulation of powder coatings with Primid® XL-552 in a 97/3 ratio. Coatings based on CRYLCOAT® 4641-0 provide outstanding weather resistance. When dry blended with CRYLCOAT® 4420-0 ...view more CRYLCOAT® 4641-0 is a superdurable, carboxylated polyester resin for the formulation of powder coatings with Primid® XL-552 in a 97/3 ratio. Coatings based on CRYLCOAT® 4641-0 provide outstanding weather resistance. When dry blended with CRYLCOAT® 4420-0 or CRYLCOAT® E 37179, a 60º gloss of 30 or 20 (respectively) can be obtained. view less | Request Sample |
| COLOROL® F | Evonik Operations GmbH, BL Coating Additives | COLOROL® F is a hazy liquid formulation of high Mw phosphoamino structures. It can be used for solventborne formulations, as well as suitable for pigment concentrates and for direct grinds (with binder). This product ensures proper wetting and stabilizati...view more COLOROL® F is a hazy liquid formulation of high Mw phosphoamino structures. It can be used for solventborne formulations, as well as suitable for pigment concentrates and for direct grinds (with binder). This product ensures proper wetting and stabilization of inorganic and organic pigments. It is recommended for architectural coatings, bentonite pastes, wood coatings, industrial coatings, and anti-corrosion coatings. view less | Request Sample |
| Cinergi™ 2085 A | Lawter | Cinergi™ 2085 A is a quickset gel vehicle that can be adaptable to laser forms and conventional ink applications. The product gives the ink formulation the freedom to formulate a variety of inks from a single source. Its benefits include a heavy gel with ...view more Cinergi™ 2085 A is a quickset gel vehicle that can be adaptable to laser forms and conventional ink applications. The product gives the ink formulation the freedom to formulate a variety of inks from a single source. Its benefits include a heavy gel with good holdout, gloss and rub features. It is considered suitable for use in sheet-fed inks and laser forms. view less | |
| Optirub™ SP1 A | Lawter | Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single c...view more Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single component system. OptiruB™ SP1 A is used in flexographic and gravure inks and in heatset, sheet-fed, UV and metal decorating inks. view less | |
| SETATHANE® E 2017 | Allnex | SETATHANE® E 2017 is suitable for formulation of cementitious 3K-PUR-screed for the food and beverage industries. Mortars formulated with SETATHANE® E 2017 and diphenylmethane type diisocyanates generally exhibit very good thermal-shock resistance and res...view more SETATHANE® E 2017 is suitable for formulation of cementitious 3K-PUR-screed for the food and beverage industries. Mortars formulated with SETATHANE® E 2017 and diphenylmethane type diisocyanates generally exhibit very good thermal-shock resistance and resistance to organic and inorganic acids, and solvents. Overcrosslinking of 400% or more is typical. No additional water or solvent should ever be added to this. view less | Request Sample |
| BECKOCURE™ EH 2260w/41WA | Allnex | BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corr...view more BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces. view less | Request Sample |
| SETALUX® 27-1590 | Allnex | SETALUX® 27-1590 is a fast curing hydroxyl-functional acrylic oligomer for 2K high solids air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1590 exhibit excellent overall performance properties. Key properties include fast cure, good pot-life, high solids, and low VOC formulation...view more SETALUX® 27-1590 is a fast curing hydroxyl-functional acrylic oligomer for 2K high solids air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1590 exhibit excellent overall performance properties. Key properties include fast cure, good pot-life, high solids, and low VOC formulation potential. It also exhibits excellent flow and leveling, good flexibility and early water resistance. view less | Request Sample |
| TEGO® Airex 922 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is ...view more TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is highly suitable for self-leveling floor coatings. It is also suitable for brush/roller applications, as well as airless and compressed air spraying. view less | Request Sample |
| DAOTAN® TW 6425/40WA | Allnex | Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly ...view more Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly flexible coating systems especially for primers for plastics. Such systems have very good adhesion to polyamide, polycarbonate, ABS, as well as pretreated PP/EPDM. view less | Request Sample |
| SETAL® 52-1646 | Allnex | SETAL® 52-1646 is a fast drying rosin and phenolic modified alkyd for use in the formulation of primers which have exceptionally good resistance to corrosion and lifting by subsequent topcoats. SETAL® 52-1646 meets the resin requirement of Federal Paint S...view more SETAL® 52-1646 is a fast drying rosin and phenolic modified alkyd for use in the formulation of primers which have exceptionally good resistance to corrosion and lifting by subsequent topcoats. SETAL® 52-1646 meets the resin requirement of Federal Paint Specification TT-P-664C for rust inhibiting, lacquer resistant primer. This is a low HAPs version of SETAL® 12-1646. view less | Request Sample |
| MOGUL® L | Cabot Corporation - Additives | MOGUL® L specialty carbon black is a low structure specialty black pigment that can impart high gloss and high jetness in printing inks, coatings and other applications. Ultimately, the dispersibility of MOGUL L specialty carbon black depends on the equipment used and the formulation...view more MOGUL® L specialty carbon black is a low structure specialty black pigment that can impart high gloss and high jetness in printing inks, coatings and other applications. Ultimately, the dispersibility of MOGUL L specialty carbon black depends on the equipment used and the formulation. With its oxidized surface, it disperses more easily than other Cabot carbon blacks used in higher jetness applications. view less | |
| N-Octadecyl vinyl ether, ODVE | BASF SE, Intermediates Division | N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulation...view more N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. N-Octadecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less | |
| CYMEL® 5010B | Allnex | CYMEL 5010B resin is a partially n-butylated benzoguanamine resin supplied in n-butanol and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL 5010B resin imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation...view more CYMEL 5010B resin is a partially n-butylated benzoguanamine resin supplied in n-butanol and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL 5010B resin imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine, CYMEL 5010B is not suitable for exterior applications. view less | Request Sample |
| BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...view more BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. view less | Request Sample |
| ETERNABRITE® 651-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® 651-PA is a bright aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation...view more ETERNABRITE® 651-PA is a bright aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® 651-PA is leafing and 70% non-volatile by weight. view less | |
| ETERNABRITE® Premier 351-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® Premier 351-PA is a bright aluminum pigment paste with a coarse particle size. This product is designed to provide strong metallic effects in solvent, liquid flexographic and gravure inks. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation...view more ETERNABRITE® Premier 351-PA is a bright aluminum pigment paste with a coarse particle size. This product is designed to provide strong metallic effects in solvent, liquid flexographic and gravure inks. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® Premier 351-PA is leafing and 77% non-volatile by weight. view less | |
| SILBERCOTE® PC 6792X | Silberline Manufacturing Co., Inc. | SILBERCOTE® PC 6792X is an inorganically surface treated aluminum pigment with a medium particle size. This product is typically used to provide dark flop, a bright face color and hiding power in automotive coatings, metallic powder coatings, and printing inks. SILBERCOTE® PC 6792X is non-leafing and 99% non-volatile by weight. Risk of explosion and environmental contamination is reduced by using this product in formulation...view more SILBERCOTE® PC 6792X is an inorganically surface treated aluminum pigment with a medium particle size. This product is typically used to provide dark flop, a bright face color and hiding power in automotive coatings, metallic powder coatings, and printing inks. SILBERCOTE® PC 6792X is non-leafing and 99% non-volatile by weight. Risk of explosion and environmental contamination is reduced by using this product in formulation. view less | |
| SETYRENE™ 23-3317 | Allnex | SETYRENE® 23-3317 is a high solids styrene acrylic modified copolymer alkyd possessing the desirable properties of fast set and dry speed with high gloss and good general film performance. This resin will allow formulation of 3.5 / 420 VOC coatings. Impro...view more SETYRENE® 23-3317 is a high solids styrene acrylic modified copolymer alkyd possessing the desirable properties of fast set and dry speed with high gloss and good general film performance. This resin will allow formulation of 3.5 / 420 VOC coatings. Improved flexibility may be attained via modification with C.P. Hall's Paraplex G-31 at the level of 5 to 7% on resin non-volatile. view less | Request Sample |
| SILBERCOTE® PC 6222X | Silberline Manufacturing Co., Inc. | SILBERCOTE® PC 6222X is an inorganically surface treated aluminum pigment with a medium, corn-flake shaped particle size. This product is typically used to provide dark flop, a bright face color and hiding power in automotive coatings, powder coatings, and printing inks. SILBERCOTE® PC 6222X is non-leafing and 99% non-volatile by weight. Risk of explosion and environmental contamination is reduced by using this product in formulation...view more SILBERCOTE® PC 6222X is an inorganically surface treated aluminum pigment with a medium, corn-flake shaped particle size. This product is typically used to provide dark flop, a bright face color and hiding power in automotive coatings, powder coatings, and printing inks. SILBERCOTE® PC 6222X is non-leafing and 99% non-volatile by weight. Risk of explosion and environmental contamination is reduced by using this product in formulation. view less | |
| Webvar™ 9700 A | Lawter | Webvar™ 9700 A is a high-structured heatset gel vehicle with a heavy gel body that offers a short thixotropic ink that keeps good leveling and transfer. It also provides formulation of low tack inks that withstand emulsification. Heatset inks based on the...view more Webvar™ 9700 A is a high-structured heatset gel vehicle with a heavy gel body that offers a short thixotropic ink that keeps good leveling and transfer. It also provides formulation of low tack inks that withstand emulsification. Heatset inks based on the product show good press stability with low temperature drying that ensures the presses can work at top speeds while still providing water balance, high gloss and dot fidelity. view less | |
| SILIKOPHEN® AC 1000 | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® AC 1000 is a low viscosity, solvent free methoxy-functional silicone resin. It offers curing at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. This product is suitable for anti-corrosion coatings, depending on the formulation...view more SILIKOPHEN® AC 1000 is a low viscosity, solvent free methoxy-functional silicone resin. It offers curing at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. This product is suitable for anti-corrosion coatings, depending on the formulation. SILIKOPHEN® AC 1000 is recommended for high temperature applications for industrial facilities, power plants, incinerating plants, ventilators, turbines, silencers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. view less | Request Sample |
| EBECRYL® 4175 | Allnex | EBECRYL® 4175 is a hard unsaturated wax-free polyester resin recommended for use in cost-effective UV-curing primers and coatings for wood that is diluted with 25% dipropyleneglycol diacrylate (DPGDA). It is used in formulation of radiation-curing (UV and...view more EBECRYL® 4175 is a hard unsaturated wax-free polyester resin recommended for use in cost-effective UV-curing primers and coatings for wood that is diluted with 25% dipropyleneglycol diacrylate (DPGDA). It is used in formulation of radiation-curing (UV and EB) coating for application by roller coating, spraying and curtain coating on wood, cork and furniture. EBECRYL® 4175 can be used to formulate clear high-gloss to matt UV- curing systems. view less | Request Sample |
| SPARKLEBRITE™ 011NL-PA Aluminum Paste | Silberline Manufacturing Co., Inc. | SPARKLEBRITE™ 011NL-PA is a non-leafing aluminum pigment carried in isopropyl alcohol. This grade is based on cornflake geometry and produces strong metallic effects in solvent and waterborne flexographic and gravure inks. Although SPARKLEBRITE™ pigments can be used in aqueous inks, they are not treated to protect against the aluminum-water reaction and special care must be taken to evaluate the gassing stability of each grade in the final ink formulation...view more SPARKLEBRITE™ 011NL-PA is a non-leafing aluminum pigment carried in isopropyl alcohol. This grade is based on cornflake geometry and produces strong metallic effects in solvent and waterborne flexographic and gravure inks. Although SPARKLEBRITE™ pigments can be used in aqueous inks, they are not treated to protect against the aluminum-water reaction and special care must be taken to evaluate the gassing stability of each grade in the final ink formulation. view less | |
| EBECRYL® 4587 | Allnex | EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance to water, alcohol, solvents, and household chemicals. EBECRYL® 4587 allows the formulation...view more EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance to water, alcohol, solvents, and household chemicals. EBECRYL® 4587 allows the formulation of UV/EB energy curable waterborne coatings free of reactive diluents, solvents and amines, as clear or pigments systems in glossy or matt finishes. view less | Request Sample |
| N-Dodecyl vinyl ether, DDVE | BASF SE, Intermediates Division | N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Dodecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulation...view more N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Dodecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. n-Dodecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less | |
| Silane Coupling Agent KH-350 | Zhejiang Feidian Chemical Co., Ltd. | KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellenc...view more KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. KH-350 can also be used to improve the compatibility of mineral fillers or pigments in polyolefins or to ease their dispersion in nonpolar matrices. view less | |
| AVANTANE® PA 4000 | ANGUS Chemical Company | AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive quality-related improvements to many of the frequently encountered problems during printing operations. When AVANTANE® PA 4000 is used either as a component of the press-side thinner or in the ink formulation...view more AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive quality-related improvements to many of the frequently encountered problems during printing operations. When AVANTANE® PA 4000 is used either as a component of the press-side thinner or in the ink formulation, press output can be increased, which results in even further operational economies. view less | |
| TEGO® Humectant 7000 | Evonik Operations GmbH, BL Coating Additives | TEGO® Humectant 7000 is a highly effective humectant for colorants with minimized influence on hydrophobicity of coatings properties. It is a clear to hazy liquid high molecular weight polymer. It is highly suitable for pigment concentrates where it prevents caking. TEGO® Humectant 7000 has good compatibility for architectural coatings, and it is universal for pigment concentrates. This product replaces a part of water in the colorant formulation...view more TEGO® Humectant 7000 is a highly effective humectant for colorants with minimized influence on hydrophobicity of coatings properties. It is a clear to hazy liquid high molecular weight polymer. It is highly suitable for pigment concentrates where it prevents caking. TEGO® Humectant 7000 has good compatibility for architectural coatings, and it is universal for pigment concentrates. This product replaces a part of water in the colorant formulation and is recommended to be added as supplied at the grind stage. view less | Request Sample |
| TEGO® Foamex 843 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 843 is a defoamer compound with fast foam knock-down. It is a clear to slightly hazy liquid formulation of polyethersiloxanes and organic polymers which contains fumed silica. It has strong defoaming characteristics with good foam collapse in...view more TEGO® Foamex 843 is a defoamer compound with fast foam knock-down. It is a clear to slightly hazy liquid formulation of polyethersiloxanes and organic polymers which contains fumed silica. It has strong defoaming characteristics with good foam collapse in pigmented low-viscosity systems. It is also suitable for pigmented and waterborne systems. TEGO® Foamex 843 is highly suitable for flexo/gravure printing. It is also suitable for airless spraying and for dip, flow, and curtain coating. view less | Request Sample |
| SETYRENE™ 23-3319 | Allnex | SETYRENE 23-3319 is the low HAPs containing high solids version of SETYRENE 23-3317 styrene acrylic modified copolymer alkyd. This resin possesses the very desirable properties of good set / dry speed with high gloss and good general film performance. Improved flexibility may be attained via modification with Paraplex G-31 at the level of 5 to 7% on resin non-volatile. SETYRENE 23-3319 will allow formulation...view more SETYRENE 23-3319 is the low HAPs containing high solids version of SETYRENE 23-3317 styrene acrylic modified copolymer alkyd. This resin possesses the very desirable properties of good set / dry speed with high gloss and good general film performance. Improved flexibility may be attained via modification with Paraplex G-31 at the level of 5 to 7% on resin non-volatile. SETYRENE 23-3319 will allow formulation of 3.5 lb/gal / 420 g/l VOC coatings. view less | Request Sample |
| VINNOL® E 15/40 A TF | Wacker Chemical Corporation | VINNOL® E 15/40 A TF is a hydroxyl-containing copolymer of approx. 84 wt.%vinyl chloride (VC) and approx. 16 wt.% of acrylic acid esters. Its main use is as a binder for surface coating compounds and printing inks. VINNOL® E 15/40 A TF is a thermoplastic, physically drying binder that forms a film when the solvent contained in the formulation...view more VINNOL® E 15/40 A TF is a hydroxyl-containing copolymer of approx. 84 wt.%vinyl chloride (VC) and approx. 16 wt.% of acrylic acid esters. Its main use is as a binder for surface coating compounds and printing inks. VINNOL® E 15/40 A TF is a thermoplastic, physically drying binder that forms a film when the solvent contained in the formulation has evaporated. It may be applied in coatings, inkjets, metal coatings, printing inks, packaging coatings and pigment preparations. view less | |
| EBECRYL® 4250 | Allnex | EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as adhesion promoter in UV and EB coatings. It may be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). EBECRYL® 4250 is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal, and exotic woods. EBECRYL® 4250 is suitable for the formulation...view more EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as adhesion promoter in UV and EB coatings. It may be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). EBECRYL® 4250 is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal, and exotic woods. EBECRYL® 4250 is suitable for the formulation of moisture-curing one-component polyurethane coatings, especially for one-component adhesion primers. view less | Request Sample |
| CYCAT® 600A | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less | Request Sample |
| CYCAT® 600 | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less | Request Sample |
| FLEXITANE® CA 6000 | ANGUS Chemical Company | FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE®...view more FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE® CA 6000 is used in solvent-based industrial coating systems, a combination of benefits is obtained during production and in the finished formulations. This includes enhanced pigment dispersion through displacement of monomolecular moisture, improved film integrity due to superior substrate wetting, improved cure times and film performance, and enhanced electrostatic-spray application. view less | |
| L-10545WD Aluminum Pigment | Silberline Manufacturing Co., Inc. | L-10545WD is an aluminum pigment paste based on a small particle size aluminum flake. The aluminum pigment flake is carried in a mixture of mineral spirits and diethylene glycol. L-10545WD contains an emulsifier to aid in the dispersion of the aluminum pigment flake in concrete mixtures and aqueous coatings systems. Although compatible with a variety of aqueous systems, L-10545WD is not chemically passivated to resist reaction with water. L-10545WD should be tested in each aqueous formulation...view more L-10545WD is an aluminum pigment paste based on a small particle size aluminum flake. The aluminum pigment flake is carried in a mixture of mineral spirits and diethylene glycol. L-10545WD contains an emulsifier to aid in the dispersion of the aluminum pigment flake in concrete mixtures and aqueous coatings systems. Although compatible with a variety of aqueous systems, L-10545WD is not chemically passivated to resist reaction with water. L-10545WD should be tested in each aqueous formulation to determine its reactivity. view less | |
| CYCAT® 4045 | Allnex | CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluen...view more CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH. view less | Request Sample |
| ETERNABRITE® 255-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® 255-PA is an aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide very strong metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation...view more ETERNABRITE® 255-PA is an aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide very strong metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® 255-PA is leafing and 74% non-volatile by weight. This grade is produced as a pigment paste carried in isopropyl alcohol but is not treated to inhibit an aluminum-water gassing reaction. view less | |
| AMP-95® | ANGUS Chemical Company | AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion...view more AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion control, offering inumerous benefits throughout the life cycle of a latex paint compared to regular pH neutralizers, such as ammonia, MEA, NaOH and also branded amines. In addition, AMP is the only US EPA VOC-exempt amine . This product is recommended for a wide range of applications, such as Architectural and Industrial Coatings, Emulsion Polymerization, Inks, Adhesives and Solvent-borne alkyds. view less | |
| SETYRENE™ 23-3320 | Allnex | SETYRENE™ 23-3320 is a low HAPs containing copolymer alkyd. The exterior durability of the SETYRENE™ 23-3320 is improved over that of the SETYRENE™ 23-3317 and SETYRENE™ 23-3319 family of products. SETYRENE™ 23-3320 possesses the desirable properties of fast set and dry speed with high gloss, improved UV durability, and good general film performance. This resin will allow formulation...view more SETYRENE™ 23-3320 is a low HAPs containing copolymer alkyd. The exterior durability of the SETYRENE™ 23-3320 is improved over that of the SETYRENE™ 23-3317 and SETYRENE™ 23-3319 family of products. SETYRENE™ 23-3320 possesses the desirable properties of fast set and dry speed with high gloss, improved UV durability, and good general film performance. This resin will allow formulation of 3.5 / 420 VOC coatings. Improved flexibility may be attained via modification with Paraplex G-31 or other similar plasticizers at the level of 5 to 7% on resin non-volatile. view less | Request Sample |
| Opaque dispersion 1090 | Opalion | Opaque dispersion 1090 is a breakthrough in paint formulation as titanium dioxide can reduce the advantage of having low density paintings. Unfortunately, the high cost of acrylic monomers has continued to thrive. Furthermore titanium dioxide has remaine...view more Opaque dispersion 1090 is a breakthrough in paint formulation as titanium dioxide can reduce the advantage of having low density paintings. Unfortunately, the high cost of acrylic monomers has continued to thrive. Furthermore titanium dioxide has remained in steady price. After years of research, 1090 opaque dispersion was developed to now compete on price in the areas of interior and exterior paints, but not in roofs where greater flexibility is needed. 1090 opaque dispersion has a perfect balance between its covering and binding power. This allows a direct change of the dispersion use increasing by keeping the other properties. view less | |
| EBECRYL® P115 | Allnex | EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV ...view more EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. It has recommended levels are from 5 to 15% based on the total formulation, usually combined with 3-5% photosensitizer. EBECRYL® P115 is recommended as a reactive co-initiator in the following applications: overprint varnishes, screen and flexo inks, wood topcoats, clear coatings on paper and plastics, and pigmented coatings. view less | Request Sample |
| Carbowet® GA-210 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- containing surfactants. It is designed to assist in the formulation...view more Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- containing surfactants. It is designed to assist in the formulation of low- to zero-VOC coatings while offering improved color development, freeze-thaw stability, and scrub resistance. The performance advantages provided by Carbowet® GA-210 surfactant extend to a variety of applications where surface tension reduction and wetting combined in a compatible, easy-to-incorporate liquid are desired. Carbowet® GA-210 surfactant offers the most universal and balanced properties suitable for all applications. view less | Request Sample |
| Dynoadd® F-300 | Dynoadd by Dynea | Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with b...view more Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with backbone resins than Dynoadd® F-3 and gives improved performance in more polar systems. Dynoadd® F-300 has applications in can coatings and coil coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-3. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-100 | Dynoadd by Dynea | Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with b...view more Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with backbone resins than Dynoadd® F-1 and gives improved performance in more polar systems. Dynoadd® F-100 has applications in coil coatings, can coatings, automotive OEM, and printing inks. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-1. It may be used in all layers in multi-layered systems. view less | |
| UCECOAT® 2807 | Allnex | UCECOAT® 2807 is a low-viscous high-performance energy curable polyurethane dispersion potentially suitable for indirect food contact applications if used in an optimized formulation and proper curing conditions are applied. Please contact us for more det...view more UCECOAT® 2807 is a low-viscous high-performance energy curable polyurethane dispersion potentially suitable for indirect food contact applications if used in an optimized formulation and proper curing conditions are applied. Please contact us for more details. The product is solvent-free, tin-free, BPA-free and APEOfree. Based on tests obtained on a structural analogue, it is also non-irritant for skin and eyes. It is characterized by a low mean particle size associated with a low viscosity and an outstanding colloidal stability when used as such or in the presence of pigments and additives. It is tack-free after water evaporation and before cure. Its composition was optimized for good coating performance and low migration after cure. view less | Request Sample |
| Dynoadd® F-802 | Dynoadd by Dynea | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulation...view more Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. view less | |
| Airase® 8070 Deaerator | Evonik Operations GmbH, BL Coating Additives | Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation...view more Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs). view less | Request Sample |
| CYMEL® NF 2000A | Allnex | CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL NF 2000A resin is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation...view more CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL NF 2000A resin is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation, or it may be used at lower levels in combination with other crosslinkers, such as amino resins or isocyanates, in order to obtain a balance of properties. CYMEL NF 2000A resin is recommended for high quality durable finishes such as automotive topcoats, exterior can varnishes, and coil coatings. view less | Request Sample |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of wat...view more DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max. The neopentyl structure of this trifunctional compound, having two primary hydroxyl groups and one tertiary carboxylic group, permits simplified processing by allowing the combining of all reactants in a single kettle charge. Good control of the reaction is possible due to the slower esterification rate of the tertiary carboxyl, assuring a uniform distribution of carboxyl groups along the resin backbone. The free acid group actively promotes resin water solubility or water dispersibility after neutralization with a base, easily introduces a polar group to improve coating adhesion and synthetic fiber dye receptivity, and increases the alkali solubility of deposited films. view less | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersio...view more DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersions. This product offers increased hydroxyl concentration, increased coating hardness and chemical resistance. It has low crystallinity and allows for ease of handling at lower temperatures. DMPA® Polyol HA-0135LV2 has a hydroxyl value of 330-345mg KOH/g, a density @ 25°C of 1170-1200g/l, a viscosity @ 25°C of 172 poise, and a colour content (APHA) of < 250 max. view less | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA...view more DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions. It is a source of acid functionality for water-borne applications, is a co-resin to improve pigment wetting, dispersing and stabilizing. This product has an acid value of 100-115mg KOH/g, density @ 25°C of 1200-1235g/l, and a non-volatile content of 98% min. view less | |
| TEGO® Foamex 32 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 32 is a defoamer concentrate. It is suitable for ecolabel compliant formulations. This product offers strong defoaming in millbases and high viscosity formulations, particularly for pigmented formulations with a high filler content. | Request Sample |
| TEGO® Foamex 10 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 10 is a defoamer emulsion for waterborne formulations. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming, especially for pigmented high-viscosity formulations. It is an alternative to mineral oil de...view more TEGO® Foamex 10 is a defoamer emulsion for waterborne formulations. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming, especially for pigmented high-viscosity formulations. It is an alternative to mineral oil defoamers, and can be used for paints of medium to high PVC and for stuccos. view less | Request Sample |
| TEGO® Glide 492 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 492 is a highly efficient emulsion providing slip and anti-blocking properties in aqueous formulations. It is free of aromatic solvents and tin, and is suitable for Ecolabel compliant formulations. | Request Sample |
| TEGO® Foamex 20 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 20 is a defoamer emulsion. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming with foam-inhibiting characteristics, universal applicability. It is recommended for clear and pigmented waterborne formu...view more TEGO® Foamex 20 is a defoamer emulsion. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming with foam-inhibiting characteristics, universal applicability. It is recommended for clear and pigmented waterborne formulations. view less | Request Sample |
| TEGO® Airex 944 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 944 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 944 can b...view more TEGO® Airex 944 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 944 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides. view less | Request Sample |
| TEGO® Airex 960 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 ca...view more TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides. view less | Request Sample |
| CRYLCOAT® 1626-0 | Allnex | CRYLCOAT® 1626-0 is a carboxylated polyester resin for use in medium-cure 60/40 hybrid powder coatings. Formulations based on CRYLCOAT® 1626-0 exhibit excellent flow and can be used in economical formulations. | Request Sample |
| TEGO® Airex 990 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations a...view more TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations as well as for solventborne and solvent-free formulations. It helps prevent pinholes and popping, is highly compatible, has good recoatability, and is highly suitable for clears. It is also suitable for alkyd and UV systems. view less | Request Sample |
| SURFYNOL® 420 | Evonik Operations GmbH, BL Coating Additives | Nonionic surfactant that offers a unique combination of formulating benefits, including wetting, defoaming, and dispersion. | Request Sample |
| SURFYNOL® 440 | Evonik Operations GmbH, BL Coating Additives | Nonionic surfactant that offers a unique combination of formulating benefits, including wetting, defoaming, and dispersion. | Request Sample |
| Lucidene 395 | Hydrite Chemical Co. | Lucidene 395 is a high gloss and holdout emulsion designed especially for overprint varnish formulations. | |
| Sempol Top 23 | Simon Quimica | Sempol Top 23 dispersion is a polyurethane water and given its excellent properties physical and chemical, is a great alternative to the formulator looking coatings high quality and high performance without the risk based formulations solvent. This produc...view more Sempol Top 23 dispersion is a polyurethane water and given its excellent properties physical and chemical, is a great alternative to the formulator looking coatings high quality and high performance without the risk based formulations solvent. This product's viscosity is 200-400 cps a 25C and elongation is 250%. view less | |
| Sempol H-80 | Simon Quimica | Sempol H-80 dispersion is a polyurethane water and given its excellent properties physical and chemical, is a great alternative to the formulator looking coatings high quality and high performance without the risk based formulations solvent. This product'...view more Sempol H-80 dispersion is a polyurethane water and given its excellent properties physical and chemical, is a great alternative to the formulator looking coatings high quality and high performance without the risk based formulations solvent. This product's viscosity is 500-1000 cps a 25C and elongation is 1200%. view less | |
| Sempol H-98 | Simon Quimica | Sempol H-98 dispersion is a polyurethane water and given its excellent properties physical and chemical, is a great alternative to the formulator looking coatings high quality and high performance without the risk based formulations solvent. This product'...view more Sempol H-98 dispersion is a polyurethane water and given its excellent properties physical and chemical, is a great alternative to the formulator looking coatings high quality and high performance without the risk based formulations solvent. This product's viscosity is 500-1000 cps a 25C and elongation is 1,000 %. view less | |
| Sempol 2061 | Simon Quimica | Sempol 2061 dispersion is a polyurethane water and given its excellent properties physical and chemical, is a great alternative to the formulator looking coatings high quality and high performance without the risk based formulations solvent. This product...view more Sempol 2061 dispersion is a polyurethane water and given its excellent properties physical and chemical, is a great alternative to the formulator looking coatings high quality and high performance without the risk based formulations solvent. This product's viscosity is 500-1500 cps a 25C and elongation is 1100-1200 %. view less | |
| Sempol 2064 | Simon Quimica | Sempol 2064 dispersion is a polyurethane water and given its excellent properties physical and chemical, is a great alternative to the formulator looking coatings high quality and high performance without the risk based formulations solvent. This product'...view more Sempol 2064 dispersion is a polyurethane water and given its excellent properties physical and chemical, is a great alternative to the formulator looking coatings high quality and high performance without the risk based formulations solvent. This product's viscosity is 500-1500 cps a 25C and elongation is 600-800 %. view less | |
| Sempol Top 21 | Simon Quimica | Sempol Top 21 dispersion is a polyurethane water and given its excellent properties physical and chemical, is a great alternative to the formulator looking coatings high quality and high performance without the risk based formulations solvent. This produc...view more Sempol Top 21 dispersion is a polyurethane water and given its excellent properties physical and chemical, is a great alternative to the formulator looking coatings high quality and high performance without the risk based formulations solvent. This product's viscosity is 2000-4000 cps a 25C and elongation is 600-700 %. view less | |
| Sempol PV-929 | Simon Quimica | Sempol PV-929 dispersion is a polyurethane water and given its excellent properties physical and chemical, is a great alternative to the formulator looking coatings high quality and high performance without the risk based formulations solvent. This produc...view more Sempol PV-929 dispersion is a polyurethane water and given its excellent properties physical and chemical, is a great alternative to the formulator looking coatings high quality and high performance without the risk based formulations solvent. This product's viscosity is 200-1000 cps a 25C and elongation is 170-280 %. view less | |
| TEGO® Glide 494 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 494 is a highly efficient emulsion providing good abrasion resistance in aqueous formulations. It offers very good slip and anti-blocking properties as well as good rub resistance in waterborne formulations. This product creates a soft and sli...view more TEGO® Glide 494 is a highly efficient emulsion providing good abrasion resistance in aqueous formulations. It offers very good slip and anti-blocking properties as well as good rub resistance in waterborne formulations. This product creates a soft and slippery touch and is free of aromatic solvents and tin. view less | Request Sample |
| Dispersion EA – 419 F2 | Opalion | Dispersion EA – 419 F2 is a new low styrene acrylic dispersion particle size and high crosslinking at low temperatures, which gives it greater physical strength and chemistry. It is applicable in formulations of floor wax water, it's film imparts to the f...view more Dispersion EA – 419 F2 is a new low styrene acrylic dispersion particle size and high crosslinking at low temperatures, which gives it greater physical strength and chemistry. It is applicable in formulations of floor wax water, it's film imparts to the formulations with unparalleled gloss, hardness, adhesion and resistance to agents cleaners. view less | |
| EBECRYL® LED 02 | Allnex | EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, th...view more EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, this co-resin can also be used to obtain better surface cure in high energy cure formulations. EBECRYL® LED 02 provides better surface cure by mitigating oxygen inhibition of the free radical process. view less | Request Sample |
| ADDID® 911 | Evonik Operations GmbH, BL Coating Additives | ADDID® 911 is an adhesion promoter for solventborne and waterborneprimers and coating formulations. It is based on an epoxy-functional silane. | Request Sample |
| DAOTAN® VTW 6462/36WA | Allnex | Daotan® VTW 6462/36WA is an aqueous dispersion of an aliphatic urethane-acryl-hybrid, self cross-linking, solvent and emulsifier free. This polyurethane emulsion was designed to formulate coating systems for various plastics such as ABS, PA, rigid PVC, fl...view more Daotan® VTW 6462/36WA is an aqueous dispersion of an aliphatic urethane-acryl-hybrid, self cross-linking, solvent and emulsifier free. This polyurethane emulsion was designed to formulate coating systems for various plastics such as ABS, PA, rigid PVC, flexible PVC and PMMA. Aqueous primers and base coats can be formulated. view less | Request Sample |
