| IGI® 6027A | The International Group, Inc. (IGI Wax) | IGI® 6027A is a specialty formulation for container candles. | |
| IGI® 6046A | The International Group, Inc. (IGI Wax) | IGI® 6046A is a specialty formulation for use in container candles. | |
| IGI® 6006A | The International Group, Inc. (IGI Wax) | IGI® 6006A is a specialty wax formulation for “one pour” container candles. | |
| Tetrâmero | Braskem S.A. | Tetrâmero is used in the formulation of industrial detergents and additives for lubricating oils. | |
| TEGO® Phobe 6510 | Evonik Operations GmbH, BL Coating Additives | TEGO® Phobe 6510 is a formulation of a polysiloxane resin / silane-blend for waterborne impregnations and primers. | Request Sample |
| TEGO® Foamex 832 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 832 it is silicone-free and mineral oil-free defoamer concentrate, effective and compatible, ideally suitable for the let-down stage. It is a hazy liquid formulation based on hydrophobic organic active matters and dispersed solid particles. T...view more TEGO® Foamex 832 it is silicone-free and mineral oil-free defoamer concentrate, effective and compatible, ideally suitable for the let-down stage. It is a hazy liquid formulation based on hydrophobic organic active matters and dispersed solid particles. TEGO® Foamex 832 is based on sustainable raw materials, for use in the millbase of pigmented printing inks, and is suitable for contact with foodstuffs. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation. view less | Request Sample |
| PARAFFLEX® 4625A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4625A is a specialty formulation of petroleum waxes suitable for the manufacture of scented pillar, votive and other molded candles. | |
| BECKOPOX™ VEH 2188w/55WA | Allnex | Beckopox® VEH 2188W/55WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings free of volatile basic amines. | Request Sample |
| EVACOTE® 7089A | The International Group, Inc. (IGI Wax) | EVACOTE® 7089A is a specialty formulation of petroleum waxes and polymers suitable in consistency to be utilized as a sealant and coating for fertilizer applications. | |
| EVACOTE® 7292C | The International Group, Inc. (IGI Wax) | EVACOTE® 7292C is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application. | |
| TEGO® Phobe 1409 | Evonik Operations GmbH, BL Coating Additives | TEGO® Phobe 1409 is a siloxane hydrophobing agent. It is suitable for ecolabel compliant formulations. This product offers excellent hydrophobing and beading effects, and is easy to incorporate into the formulation. | Request Sample |
| TEGO® Foamex 823 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 823 is a white, thixotropic liquid defoamer emulsion. It is used for waterborne architectural coatings, decorative coatings, industrial coatings, and pigmented coatings based on elastic polymer emulsions, e.g. roof tile coatings. Some special features of TEGO® Foamex 823 are that it can be used universally in clear and pigmented formulations, and it is highly effective, particularly for waterborne formulations. The long-term effectiveness of this product is dependent on the formulation and should be tested in the individual formulation...view more TEGO® Foamex 823 is a white, thixotropic liquid defoamer emulsion. It is used for waterborne architectural coatings, decorative coatings, industrial coatings, and pigmented coatings based on elastic polymer emulsions, e.g. roof tile coatings. Some special features of TEGO® Foamex 823 are that it can be used universally in clear and pigmented formulations, and it is highly effective, particularly for waterborne formulations. The long-term effectiveness of this product is dependent on the formulation and should be tested in the individual formulation. view less | Request Sample |
| IGI® 6028A | The International Group, Inc. (IGI Wax) | IGI® 6028A is a specialty formulation of vegetable derived waxes and petroleum derived waxes suitable in consistency to be used for the manufacture of pillar, votive and other molded candles. | |
| TEGO® Foamex 830 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 830 is a silicone-free defoamer concentrate, highly compatible, ideally suitable for the grinding stage and pigment concentrates. It is a slightly hazy liquid organic polymer which contains fumed silica. TEGO® Foamex 830 is suitable for compressed air spraying and dip coating, flow coating, and curtain coating. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation...view more TEGO® Foamex 830 is a silicone-free defoamer concentrate, highly compatible, ideally suitable for the grinding stage and pigment concentrates. It is a slightly hazy liquid organic polymer which contains fumed silica. TEGO® Foamex 830 is suitable for compressed air spraying and dip coating, flow coating, and curtain coating. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation. view less | Request Sample |
| Uniplex 280CG | Rhein Chemie Rheinau GmbH | Uniplex 280CG is sucrose benzoate appearing as a clear solid. This stable, odourless, and non-crystalline brittle solid has a sharp softening range, ultraviolet light stability, and is compatible with a broad range of resins, plasticizers , and solvents. It provides high gloss, film hardness, flexibility, and water and alcohol resistance. Uniplex 280CG is used as a modifier for clear lacquers, in the formulation of clear coatings for wood, paper, and metal, in the formulation...view more Uniplex 280CG is sucrose benzoate appearing as a clear solid. This stable, odourless, and non-crystalline brittle solid has a sharp softening range, ultraviolet light stability, and is compatible with a broad range of resins, plasticizers , and solvents. It provides high gloss, film hardness, flexibility, and water and alcohol resistance. Uniplex 280CG is used as a modifier for clear lacquers, in the formulation of clear coatings for wood, paper, and metal, in the formulation of ink systems, in ultraviolet inks and coatings, metallic and pigmented coatings, and heat seal coatings. view less | |
| TEGO® Foamex 842 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 842 is a highly effective defoamer solution with good long-term effectiveness and very strong defoaming for use in millbase. It is a silica-free clear liquid solution of a polyether siloxane copolymer. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation...view more TEGO® Foamex 842 is a highly effective defoamer solution with good long-term effectiveness and very strong defoaming for use in millbase. It is a silica-free clear liquid solution of a polyether siloxane copolymer. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation. TEGO® Foamex 842 is highly suitable for flexo/gravure printing. It is also suitable for both airless and compressed air spraying. view less | Request Sample |
| BECKOCURE™ EH 2240/70MP | Allnex | BECKOCURE® EH 2240/70MP is an adduct hardener based on polyamines, thus free of volatile amines. In combination with suitable epoxy resins this hardener enables the formulation of high performing 2K high solids anticorrosion primers. | Request Sample |
| EBECRYL® P39 | Allnex | EBECRYL® P39 is a polymeric benzophenone derivative diluted with 25% of EBECRYL® LEO 10501 that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV c...view more EBECRYL® P39 is a polymeric benzophenone derivative diluted with 25% of EBECRYL® LEO 10501 that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. It has recommended levels are from 8 to 10% based on total formulation. It should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100. EBECRYL® P39 is recommended for use in over print varnishes where low residual odor is required. view less | Request Sample |
| ZetaSperse® 3800 Dispersant | Evonik Operations GmbH, BL Coating Additives | ZetaSperse® 3800 dispersant is formulated to provide strong stabilization of pigments, fillers, and other solids in aqueous dispersion. Based on a moderate molecular weight comb polymer, ZetaSperse® 3800 dispersant offers robust steric stabilization suitable for a wide range of formulation...view more ZetaSperse® 3800 dispersant is formulated to provide strong stabilization of pigments, fillers, and other solids in aqueous dispersion. Based on a moderate molecular weight comb polymer, ZetaSperse® 3800 dispersant offers robust steric stabilization suitable for a wide range of formulation characteristics. view less | Request Sample |
| CYMEL® 5010 | Allnex | CYMEL® 5010 resin is a partially n-butylated benzoguanamine resin supplied in a mixture of n-butanol and xylene and designed for solvent-based coatings. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation...view more CYMEL® 5010 resin is a partially n-butylated benzoguanamine resin supplied in a mixture of n-butanol and xylene and designed for solvent-based coatings. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. view less | Request Sample |
| ADDITOL® P 824 | Allnex | ADDITOL® P 824 is a 15% active flow promoter masterbatch on an outdoor resistant hydroxylated polyester matrix that can be used in the manufacture of powder coatings. An addition of 3-5%, by weight to a powder coating formulation increases gloss and is co...view more ADDITOL® P 824 is a 15% active flow promoter masterbatch on an outdoor resistant hydroxylated polyester matrix that can be used in the manufacture of powder coatings. An addition of 3-5%, by weight to a powder coating formulation increases gloss and is compatible with nearly all powder coating systems. view less | Request Sample |
| CYMEL® 1161 | Allnex | CYMEL® 1161 resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibili...view more CYMEL® 1161 resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibility. It is especially recommended for automotive topcoats, general metal finishes, and coil coatings. view less | Request Sample |
| TEGO® Airex 991 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 h...view more TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 has good recoatability, is highly effective, prevents micro- and macro-foam, and is used particularly for pigmented formulations. view less | Request Sample |
| CYMEL® 659 | Allnex | CYMEL® 659 resin is a partially n-butylated benzoguanamine resin supplied in n-butanol. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation...view more CYMEL® 659 resin is a partially n-butylated benzoguanamine resin supplied in n-butanol. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine resins, CYMEL® 659 is not suitable for exterior applications. view less | Request Sample |
| ADDITOL® P 896 | Allnex | ADDITOL® P 896 is a flow promoter master batch suitable for use in pigmented powder coatings. It contains approximately 15% active substance in an outdoor resistant hydroxylated polyester carrier. The addition of 3-5% by weight to a powder coating formulation...view more ADDITOL® P 896 is a flow promoter master batch suitable for use in pigmented powder coatings. It contains approximately 15% active substance in an outdoor resistant hydroxylated polyester carrier. The addition of 3-5% by weight to a powder coating formulation is recommended to improve flow while maintaining good compatibility with nearly all powder coating systems. view less | Request Sample |
| COLOROL® F | Evonik Operations GmbH, BL Coating Additives | COLOROL® F is a hazy liquid formulation of high Mw phosphoamino structures. It can be used for solventborne formulations, as well as suitable for pigment concentrates and for direct grinds (with binder). This product ensures proper wetting and stabilizati...view more COLOROL® F is a hazy liquid formulation of high Mw phosphoamino structures. It can be used for solventborne formulations, as well as suitable for pigment concentrates and for direct grinds (with binder). This product ensures proper wetting and stabilization of inorganic and organic pigments. It is recommended for architectural coatings, bentonite pastes, wood coatings, industrial coatings, and anti-corrosion coatings. view less | Request Sample |
| BECKOCURE™ EH 2260w/41WA | Allnex | BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corr...view more BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces. view less | Request Sample |
| TEGO® Airex 922 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is ...view more TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is highly suitable for self-leveling floor coatings. It is also suitable for brush/roller applications, as well as airless and compressed air spraying. view less | Request Sample |
| CYMEL® 5010B | Allnex | CYMEL 5010B resin is a partially n-butylated benzoguanamine resin supplied in n-butanol and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL 5010B resin imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation...view more CYMEL 5010B resin is a partially n-butylated benzoguanamine resin supplied in n-butanol and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL 5010B resin imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine, CYMEL 5010B is not suitable for exterior applications. view less | Request Sample |
| BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...view more BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. view less | Request Sample |
| Webvar™ 9700 A | Lawter | Webvar™ 9700 A is a high-structured heatset gel vehicle with a heavy gel body that offers a short thixotropic ink that keeps good leveling and transfer. It also provides formulation of low tack inks that withstand emulsification. Heatset inks based on the...view more Webvar™ 9700 A is a high-structured heatset gel vehicle with a heavy gel body that offers a short thixotropic ink that keeps good leveling and transfer. It also provides formulation of low tack inks that withstand emulsification. Heatset inks based on the product show good press stability with low temperature drying that ensures the presses can work at top speeds while still providing water balance, high gloss and dot fidelity. view less | |
| Silane Coupling Agent KH-350 | Zhejiang Feidian Chemical Co., Ltd. | KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellenc...view more KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. KH-350 can also be used to improve the compatibility of mineral fillers or pigments in polyolefins or to ease their dispersion in nonpolar matrices. view less | |
| AVANTANE® PA 4000 | ANGUS Chemical Company | AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive quality-related improvements to many of the frequently encountered problems during printing operations. When AVANTANE® PA 4000 is used either as a component of the press-side thinner or in the ink formulation...view more AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive quality-related improvements to many of the frequently encountered problems during printing operations. When AVANTANE® PA 4000 is used either as a component of the press-side thinner or in the ink formulation, press output can be increased, which results in even further operational economies. view less | |
| TEGO® Humectant 7000 | Evonik Operations GmbH, BL Coating Additives | TEGO® Humectant 7000 is a highly effective humectant for colorants with minimized influence on hydrophobicity of coatings properties. It is a clear to hazy liquid high molecular weight polymer. It is highly suitable for pigment concentrates where it prevents caking. TEGO® Humectant 7000 has good compatibility for architectural coatings, and it is universal for pigment concentrates. This product replaces a part of water in the colorant formulation...view more TEGO® Humectant 7000 is a highly effective humectant for colorants with minimized influence on hydrophobicity of coatings properties. It is a clear to hazy liquid high molecular weight polymer. It is highly suitable for pigment concentrates where it prevents caking. TEGO® Humectant 7000 has good compatibility for architectural coatings, and it is universal for pigment concentrates. This product replaces a part of water in the colorant formulation and is recommended to be added as supplied at the grind stage. view less | Request Sample |
| TEGO® Foamex 843 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 843 is a defoamer compound with fast foam knock-down. It is a clear to slightly hazy liquid formulation of polyethersiloxanes and organic polymers which contains fumed silica. It has strong defoaming characteristics with good foam collapse in...view more TEGO® Foamex 843 is a defoamer compound with fast foam knock-down. It is a clear to slightly hazy liquid formulation of polyethersiloxanes and organic polymers which contains fumed silica. It has strong defoaming characteristics with good foam collapse in pigmented low-viscosity systems. It is also suitable for pigmented and waterborne systems. TEGO® Foamex 843 is highly suitable for flexo/gravure printing. It is also suitable for airless spraying and for dip, flow, and curtain coating. view less | Request Sample |
| CYCAT® 600A | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less | Request Sample |
| CYCAT® 600 | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less | Request Sample |
| FLEXITANE® CA 6000 | ANGUS Chemical Company | FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE®...view more FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE® CA 6000 is used in solvent-based industrial coating systems, a combination of benefits is obtained during production and in the finished formulations. This includes enhanced pigment dispersion through displacement of monomolecular moisture, improved film integrity due to superior substrate wetting, improved cure times and film performance, and enhanced electrostatic-spray application. view less | |
| CYCAT® 4045 | Allnex | CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluen...view more CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH. view less | Request Sample |
| AMP-95® | ANGUS Chemical Company | AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion...view more AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion control, offering inumerous benefits throughout the life cycle of a latex paint compared to regular pH neutralizers, such as ammonia, MEA, NaOH and also branded amines. In addition, AMP is the only US EPA VOC-exempt amine . This product is recommended for a wide range of applications, such as Architectural and Industrial Coatings, Emulsion Polymerization, Inks, Adhesives and Solvent-borne alkyds. view less | |
| Opaque dispersion 1090 | Opalion | Opaque dispersion 1090 is a breakthrough in paint formulation as titanium dioxide can reduce the advantage of having low density paintings. Unfortunately, the high cost of acrylic monomers has continued to thrive. Furthermore titanium dioxide has remaine...view more Opaque dispersion 1090 is a breakthrough in paint formulation as titanium dioxide can reduce the advantage of having low density paintings. Unfortunately, the high cost of acrylic monomers has continued to thrive. Furthermore titanium dioxide has remained in steady price. After years of research, 1090 opaque dispersion was developed to now compete on price in the areas of interior and exterior paints, but not in roofs where greater flexibility is needed. 1090 opaque dispersion has a perfect balance between its covering and binding power. This allows a direct change of the dispersion use increasing by keeping the other properties. view less | |
| EBECRYL® P115 | Allnex | EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV ...view more EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. It has recommended levels are from 5 to 15% based on the total formulation, usually combined with 3-5% photosensitizer. EBECRYL® P115 is recommended as a reactive co-initiator in the following applications: overprint varnishes, screen and flexo inks, wood topcoats, clear coatings on paper and plastics, and pigmented coatings. view less | Request Sample |
| Carbowet® GA-210 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- containing surfactants. It is designed to assist in the formulation...view more Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- containing surfactants. It is designed to assist in the formulation of low- to zero-VOC coatings while offering improved color development, freeze-thaw stability, and scrub resistance. The performance advantages provided by Carbowet® GA-210 surfactant extend to a variety of applications where surface tension reduction and wetting combined in a compatible, easy-to-incorporate liquid are desired. Carbowet® GA-210 surfactant offers the most universal and balanced properties suitable for all applications. view less | Request Sample |
| Dynoadd® F-300 | Dynoadd by Dynea | Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with b...view more Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with backbone resins than Dynoadd® F-3 and gives improved performance in more polar systems. Dynoadd® F-300 has applications in can coatings and coil coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-3. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-100 | Dynoadd by Dynea | Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with b...view more Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with backbone resins than Dynoadd® F-1 and gives improved performance in more polar systems. Dynoadd® F-100 has applications in coil coatings, can coatings, automotive OEM, and printing inks. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-1. It may be used in all layers in multi-layered systems. view less | |
| Dynoadd® F-802 | Dynoadd by Dynea | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulation...view more Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. view less | |
| Airase® 8070 Deaerator | Evonik Operations GmbH, BL Coating Additives | Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation...view more Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs). view less | Request Sample |
| CYMEL® NF 2000A | Allnex | CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL NF 2000A resin is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation...view more CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL NF 2000A resin is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation, or it may be used at lower levels in combination with other crosslinkers, such as amino resins or isocyanates, in order to obtain a balance of properties. CYMEL NF 2000A resin is recommended for high quality durable finishes such as automotive topcoats, exterior can varnishes, and coil coatings. view less | Request Sample |
| TEGO® Foamex 32 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 32 is a defoamer concentrate. It is suitable for ecolabel compliant formulations. This product offers strong defoaming in millbases and high viscosity formulations, particularly for pigmented formulations with a high filler content. | Request Sample |
| TEGO® Foamex 10 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 10 is a defoamer emulsion for waterborne formulations. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming, especially for pigmented high-viscosity formulations. It is an alternative to mineral oil de...view more TEGO® Foamex 10 is a defoamer emulsion for waterborne formulations. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming, especially for pigmented high-viscosity formulations. It is an alternative to mineral oil defoamers, and can be used for paints of medium to high PVC and for stuccos. view less | Request Sample |
| TEGO® Glide 492 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 492 is a highly efficient emulsion providing slip and anti-blocking properties in aqueous formulations. It is free of aromatic solvents and tin, and is suitable for Ecolabel compliant formulations. | Request Sample |
| TEGO® Foamex 20 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 20 is a defoamer emulsion. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming with foam-inhibiting characteristics, universal applicability. It is recommended for clear and pigmented waterborne formu...view more TEGO® Foamex 20 is a defoamer emulsion. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming with foam-inhibiting characteristics, universal applicability. It is recommended for clear and pigmented waterborne formulations. view less | Request Sample |
| TEGO® Airex 944 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 944 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 944 can b...view more TEGO® Airex 944 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 944 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides. view less | Request Sample |
| TEGO® Airex 960 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 ca...view more TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides. view less | Request Sample |
| TEGO® Airex 990 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations a...view more TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations as well as for solventborne and solvent-free formulations. It helps prevent pinholes and popping, is highly compatible, has good recoatability, and is highly suitable for clears. It is also suitable for alkyd and UV systems. view less | Request Sample |
| SURFYNOL® 420 | Evonik Operations GmbH, BL Coating Additives | Nonionic surfactant that offers a unique combination of formulating benefits, including wetting, defoaming, and dispersion. | Request Sample |
| SURFYNOL® 440 | Evonik Operations GmbH, BL Coating Additives | Nonionic surfactant that offers a unique combination of formulating benefits, including wetting, defoaming, and dispersion. | Request Sample |
| TEGO® Glide 494 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 494 is a highly efficient emulsion providing good abrasion resistance in aqueous formulations. It offers very good slip and anti-blocking properties as well as good rub resistance in waterborne formulations. This product creates a soft and sli...view more TEGO® Glide 494 is a highly efficient emulsion providing good abrasion resistance in aqueous formulations. It offers very good slip and anti-blocking properties as well as good rub resistance in waterborne formulations. This product creates a soft and slippery touch and is free of aromatic solvents and tin. view less | Request Sample |
| ADDID® 911 | Evonik Operations GmbH, BL Coating Additives | ADDID® 911 is an adhesion promoter for solventborne and waterborneprimers and coating formulations. It is based on an epoxy-functional silane. | Request Sample |
| PARAFFLEX® 4630A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4630A is a soft, smooth and creamy looking blend specially formulated for single pour container candles. | |
| AEROSIL® COK 84 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® COK 84 is a formulated product with highly dispersed fumed aluminium oxide in the ratio of 5:1. | Request Sample |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulation...view more Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. view less | |
| TEGO® Foamex 852 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 852 is an effective defoamer concentrate based on polyether siloxane technology. Suitable for pigmented and clear formulations. | Request Sample |
| PC-3144® Defoamer | Allnex | PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB based synthetic lubricants, as well as the formulation...view more PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB based synthetic lubricants, as well as the formulations containing these components, where conventional polyacrylate based defoamers do not work or do not work well. view less | Request Sample |
| Lipotin® A | Evonik Operations GmbH, BL Coating Additives | Lipotin® A is a wetting and dispersing additive based on soya lecithin for waterborne formulations. It helps the wetting of the pigments and gives additional stabilization. | Request Sample |
| CYMEL® U-1054 | Allnex | CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. It is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance propertie...view more CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. It is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, this product provides an excellent balance between adhesion and film flexibility, especially after several cure cycles. view less | Request Sample |
| Dynoadd® F-760 | Dynoadd by Dynea | Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in c...view more Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in coating surfaces that are easily recoated. Dynoadd® F-760 is based on a solution of foam destabilizing polymers and is silicone- and mineral oil-free. view less | |
| TEGO® Dispers 689 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 689 promotes the incorporation of matting agents in radiation-curing formulations. It enables strong matting effect and is solvent-free. | Request Sample |
| CYMEL® XW 3106 | Allnex | CYMEL® XW 3106 resin is a specially alkylated, high solids melamine crosslinking agent designed for solvent-borne, two-pack ambient and low bake formulations. The low temperature cure potential for this crosslinker provides the opportunity to formulate hi...view more CYMEL® XW 3106 resin is a specially alkylated, high solids melamine crosslinking agent designed for solvent-borne, two-pack ambient and low bake formulations. The low temperature cure potential for this crosslinker provides the opportunity to formulate high performance coatings for heat sensitive substrates. These systems have excellent early hardness, resistance properties, appearance and hot/cold cycle flexibility. view less | Request Sample |
| TEGO® Glide 490 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 490 is a highly efficient emulsion providing slip and anti-blocking properties in aqueous formulations. It is free of aromatic solvents and tin. | Request Sample |
| AFCONA - 5290 | AFCONA Additives Sdn Bhd | AFCONA – 5290 is a polymer with pigment affinity groups. This product consists of high molecular weight dispersants and is used for high solid systems and formulations and provides pigment stability, performance, and color strength. AFONCA – 5290 finds ap...view more AFCONA – 5290 is a polymer with pigment affinity groups. This product consists of high molecular weight dispersants and is used for high solid systems and formulations and provides pigment stability, performance, and color strength. AFONCA – 5290 finds application in solvent-based systems from low to high polarity including air dry alkyds, in high solid coatings such as polyurethane, epoxy, and ultraviolet coatings, and as a dispersant for ink formulations. view less | |
| TEGO® Foamex 26 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 26 is a defoamer concentrate. It is suitable for ecolabel compliant formulations. This product is a universal defoamer for the mill base, and it prevents micro- and macro-foam. | Request Sample |
| TEGO® Foamex 800 | Evonik Operations GmbH, BL Coating Additives | TEGO® FOAMEX 800 is a defoamer emulsion with good compatibility and easy incorporation. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer, containing fumed silica. A universal let-down defoamer for low pigment content formulations and clear coats, TEGO® Foamex 800, is easily incorporated, especially for polyurethane formulation...view more TEGO® FOAMEX 800 is a defoamer emulsion with good compatibility and easy incorporation. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer, containing fumed silica. A universal let-down defoamer for low pigment content formulations and clear coats, TEGO® Foamex 800, is easily incorporated, especially for polyurethane formulations. It is highly suitable for dip coating, flow coating, and curtain coating as well as brush and roller applications. view less | Request Sample |
| TEGO® Phobe 1401 N | Evonik Operations GmbH, BL Coating Additives | TEGO® Phobe 1401 N is an emulsion of an amino-functional polysiloxane for the hydro-phobization of coating formulations. It reduces water uptake and generates a water-beading effect. | Request Sample |
| CYMEL® 3745 | Allnex | CYMEL® 3745 resin is a highly methylated melamine crosslinker designed for use in both solvent-borne and waterborne industrial finishes. Its high functionality and low tendency to self-condense promotes excellent formulated stability and results in films with very good hardness development, flexibility, formability, and resistance properties making it suitable for a wide range of coating applications, like can and container coatings, foil coatings, automotive coatings and waterborne formulation...view more CYMEL® 3745 resin is a highly methylated melamine crosslinker designed for use in both solvent-borne and waterborne industrial finishes. Its high functionality and low tendency to self-condense promotes excellent formulated stability and results in films with very good hardness development, flexibility, formability, and resistance properties making it suitable for a wide range of coating applications, like can and container coatings, foil coatings, automotive coatings and waterborne formulations. view less | Request Sample |
| BENTONE® NP-10 | Elementis | BENTONE® NP-10 is a solventborne, high- efficiency, easy-to-use organoclay. It is an ideal rheological additive for inks formulated with petroleum/vegetable oils and low polarity solvents. | |
| Antiespumante E (Ecológico) | Opalion | ANTIESPUMANTE E (Ecológico) is necessary to reduce pollution by solvents to meet increasingly stringent environmental standards. This defoamer was formulated with solvents of lower toxicity trying to balance the other properties. | |
| REWOPAL® M 365 | Evonik Operations GmbH, BL Coating Additives | REWOPAL® M 365 is a non-ionic wetting and dispersing additive for waterborne formulations. Helps the wetting of organic pigment. Can be used as co-disprsant in base paints. | Request Sample |
| TEGO® Foamex 805 N | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 805 N defoamer emulsion with a broad application range, outstanding compatibility and easy incorporation. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer. As a universal let-down defoamer for low pigment content formulations and clear coats, TEGO® Foamex 805 N is easily incorporated especially for polyurethane formulation...view more TEGO® Foamex 805 N defoamer emulsion with a broad application range, outstanding compatibility and easy incorporation. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer. As a universal let-down defoamer for low pigment content formulations and clear coats, TEGO® Foamex 805 N is easily incorporated especially for polyurethane formulations. It is well suited for post-addition, and for flexo/gravure printing and dip coating, flow coating, and curtain coating. view less | Request Sample |
| TEGO® Airex 940 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 940 shows good compatability combined with effectiveness against both micro- and macro-foam. Ideally suited for high-solid and 2K solvent-free formulations. | Request Sample |
| LAPONITE® SL25 | BYK | LAPONITE® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, LAPONITE® SL25 is a translucent and colourless low viscosity liquid dispersion. On addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulation...view more LAPONITE® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, LAPONITE® SL25 is a translucent and colourless low viscosity liquid dispersion. On addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. view less | |
| NUOSPERSE® FX 365 | Elementis | NUOSPERSE® FX 365 is a nonionic polymeric wetting and dispersing agent for use in waterborne coating and ink formulations and pigment pastes. This product shows outstanding pigment wetting and stabilizing properties. | |
| Isooctyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isooctyl Acetate is a clear liquid with a pleasant, fruity fragrance. It is used to promote flow and retard blushing in formulations such as lacquers, lacquers emulsions in screen inks, parking enamels and air-dry enamels. | |
| TEGO® Dispers 679 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 679 is a wetting and dispersing additive for solventborne formulations. It shows very high color strength, especially with organic pigments and carbon blacks. It is suitable also for inorganic pigments. | Request Sample |
| TEGO® Dispers 705 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 705 is a wetting and dispersing additive for solventborne formulations. Stabilitzes inorganic pigments, fillers and bentonites. Can be used to produce very stable and easy to handle pastes of bentonites. | Request Sample |
| TEGO® Dispers 691 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 691 is a highly efficient polymeric wetting and dispersing additive for solventborne formulations. It gives outstanding wetting and stabilization to both organic and inorganic pigments in solventborne printing inks. | Request Sample |
| NUOSPERSE® FN 211 | Elementis | NUOSPERSE® FN 211 is a nonionic pigment wetting and dispersing agent primarily for use in waterborne coating formulations. This product is alkyl phenol ethoxylate-free and replaces traditionally used nonionic surfactants. | |
| TEGO® Dispers 673 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 673 is a wetting and dispersing additive for solventborne coatings. It is a high performance additives for high jetness in combination with good color strength development. This product is suitable for xylene containing formulations. | Request Sample |
| TEGO® Dispers 711 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 711 W is an anionic wetting and dispersing additive for waterborne formulations. It is especially suitable for inorganic pigments and fillers and combines very good viscosity reduction with enhanced colorant acceptance. | Request Sample |
| TEGO® Dispers 712 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 712 W is an anionic wetting and dispersing additive for waterborne formulations. It is especially suitable for inorganic pigments and fillers and combines very good viscosity reduction with enhanced colorant acceptance. | Request Sample |
| TEGO® Dispers 717 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 717 W is an anionic wetting and dispersing additive for waterborne formulations. It combines very good viscosity reduction when used with inorganic pigments and enhanced compatibility of tinted paints. | Request Sample |
| Dynoadd® F-713 | Dynoadd by Dynea | Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding b...view more Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated PE and PUs. Dynoadd® F-713 may reduce film transparency. Dynoadd® F-713 has applications in 2K Epoxy, Unsat. PE, and 1 and 2K PU formulations. view less | |
| CYMEL® 1130 | Allnex | CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for general industrial high solids baking formulations requiring improved wetting of metal substrates, film adhesion and humidity resistance properties. This product is insoluble in water but shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulation...view more CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for general industrial high solids baking formulations requiring improved wetting of metal substrates, film adhesion and humidity resistance properties. This product is insoluble in water but shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. view less | Request Sample |
| ALBIDUR® 1223 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® 1223 is a reactive resin modifier. It offers high flexibility, excellent adhesion, chemical and solvent resistance, and good long-term persistence. This product is recommended for formulations with very low VOC-content. | Request Sample |
| TEGO® Dispers 658 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 658 is a non-ionic wetting and dispersing additive that can be used in waterborne formulations and in universal colorants. It provides excellent pigment wetting and color strength development, especially for organic pigments. | Request Sample |
| CYMEL® 373 | Allnex | CYMEL® 373 resin is a partially methylated melamine supplied in water. Its high reactivity combined with water solubility makes this product suitable for a wide range of fast-curing waterborne industrial coating formulations. | Request Sample |
| TEGO® Foamex 24 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 24 is a defoamer emulsion. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming with foam-inhibiting characteristics, universal applicability. It can be used in clear and pigmented waterborne coatings. | Request Sample |
| TEGO® Dispers 671 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 671 is a polymeric wetting and dispersing additive for solventborne formulations. Provides high color strength, especially with organic pigments. Dispersions of carbon black pigments show a low viscosity and a blueish undertone. | Request Sample |
| LAPONITE® S482 | BYK | LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flowing for up to 1 year. On addition of small quantities of electrolyte, or on addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulation...view more LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flowing for up to 1 year. On addition of small quantities of electrolyte, or on addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. view less | |
| SIPERNAT® 835 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 835 is a precipitated synthetic sodium magnesium aluminosilicate that can be effective as a titanium dioxide extender for paints and coatings applications. It has proven particularly useful in high PVC formulations based on VAE or vinyl acrylic ...view more SIPERNAT® 835 is a precipitated synthetic sodium magnesium aluminosilicate that can be effective as a titanium dioxide extender for paints and coatings applications. It has proven particularly useful in high PVC formulations based on VAE or vinyl acrylic binders. view less | Request Sample |
