| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...view more 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. view less | |
| Acrylic Crosslinker GMA-300 | Worlée-Chemie G.m.b.H. | Acrylic Crosslinker GMA-300 is a glycidyl functional acrylic terpolymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used in combination with other resins and curing agents in UV-curable, high-solids...view more Acrylic Crosslinker GMA-300 is a glycidyl functional acrylic terpolymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used in combination with other resins and curing agents in UV-curable, high-solids, solvent-based and powder coating systems. In powder coatings using carboxylated resins, Acrylic Crosslinker GMA-300 will increase the crosslink density, the mechanical properties and the chemical resistance. view less | |
| Blown Castor Oil (BCO) | Castor International BV | Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...view more Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. view less | |
| Castor Oil | Castor International BV | Castor Oil, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor and is pale-yellowish or almost colorless. There are numerous applications in various industrial s...view more Castor Oil, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor and is pale-yellowish or almost colorless. There are numerous applications in various industrial segments, because of its unique molecule structure, such as lubricants in hydraulic fluids and 2 stroke engines, polyurethane in PU floor coatings, PU adhesives/sealants and PU foams, adhesives in hot-melts, and more. view less | |
| Castor Oil FSG Low Acid Value | Castor International BV | Castor Oil FSG Low Acid Value, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/...view more Castor Oil FSG Low Acid Value, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/g max. There are numerous applications in various industrial segments, because of its unique molecule structure, such as polyurethane in PU floor coatings, PU adhesives/sealants and PU foams. view less | |
| Castor Oil FSG Low Water Content | Castor International BV | Castor Oil FSG Low Water Content, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg K...view more Castor Oil FSG Low Water Content, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/g max. There are numerous applications in various industrial segments, because of its unique molecule structure, such as polyurethane in PU floor coatings, PU adhesives/sealants and PU foams. view less | |
| Castor Polyol (Type 114) | Castor International BV | Castor Polyol (Type 114) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1145. It is for use in vari...view more Castor Polyol (Type 114) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1145. It is for use in various fillers, like silicates, quartz, calcium carbonate and barites, additives and pigments as a leveling aids and defoamers and it may be added to such formulations for preparing coatings, adhesives, floor coatings, electrical casting applications, and sealants. view less | |
| Castor Polyol (Type 115) | Castor International BV | Castor Polyol (Type 115) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of 1.000 ± 0.00 (25°C) and is developed as an alternative for Desmophen-1150. It is cured with MDI and th...view more Castor Polyol (Type 115) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of 1.000 ± 0.00 (25°C) and is developed as an alternative for Desmophen-1150. It is cured with MDI and the nature and addition of additives and fillers may vary depending on the particular formulation for making: adhesives, coatings, floorings, and electrical casting applications. view less | |
| Castor Polyol (Type 116) | Castor International BV | Castor Polyol (Type 116) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1155. It can be cured with ...view more Castor Polyol (Type 116) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1155. It can be cured with MDI and its variants or by aliphatic isocyanates like HDI, in combination with castor polyol types 114 and 115. Castor Polyol (Type 116) has many applications, for instance: in various fillers, like silicates, quartz, calcium carbonate, and barites: in additives and pigments, like leveling aids and defoamers: and may be added to such formulations for preparing coatings, adhesives, floor coatings, electrical casting applications, and sealants. view less | |
| Castor Thickener (Blend) | Castor International BV | Castor Thickener (Blend) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Blend) has advantages in improved storage ...view more Castor Thickener (Blend) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Blend) has advantages in improved storage stability and leveling, no hard settling of pigments, and provides sag control. Other applications are in adhesives, sealants, alkyd resins, and 2K PU systems. Castor Thickener (Blend) has a melting point of 136°C to 140°C, a saponification value of 130 to 138 mg KOH/g, and an acid value of 6 mg KOH/g max. view less | |
| Castor Thickener (Pure) | Castor International BV | Castor Thickener (Pure) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Pure) has advantages in improved storage st...view more Castor Thickener (Pure) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Pure) has advantages in improved storage stability and leveling, no hard settling of pigments, and provides sag control. Other applications are in adhesives, sealants, alkyd resins, and 2K PU systems. Castor Thickener (Pure) has a melting point of 82°C to 88°C, a saponification value of 177 to 182 mg KOH/g, and an acid value of 4 mg KOH/g max. view less | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...view more Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...view more Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...view more Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Drying additive 3A (Paste 50) | Castor International BV | Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane form...view more Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 3A (Paste 60) | Castor International BV | Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane form...view more Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 3A (Powder) | Castor International BV | Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethan...view more Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Paste 50) | Castor International BV | Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyure...view more Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Paste 60) | Castor International BV | Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyure...view more Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Powder) | Castor International BV | Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyu...view more Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Epomatt G-151 | Worlée-Chemie G.m.b.H. | Epomatt G-151 is a special type of gloss modifier for epoxy-based powder coatings. The product, when cured with o-tolyl biguanide (OTB) or other common epoxy curing agents such as accelerated dicyandiamide provides coatings with good mechanical and chemic...view more Epomatt G-151 is a special type of gloss modifier for epoxy-based powder coatings. The product, when cured with o-tolyl biguanide (OTB) or other common epoxy curing agents such as accelerated dicyandiamide provides coatings with good mechanical and chemical resistance properties. Gloss control is achieved by varying the amount of Epomatt G-151 in the formulation. Smooth matt finishes with 60° gloss values ranging from 2% to 70% can be achieved with Epomatt G-151. view less | |
| Epoxy Hardener G-91 | Worlée-Chemie G.m.b.H. | Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy cost...view more Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy costs and offering the powder coater flexibility in curing conditions as well as the possibility to coat heat sensitive substrates are the advantages. When medium and low gloss finishes are desired, Epoxy Hardener G-91 can be used in combination with Epomatt G-152 to formulate powder coatings with a wide range of possible gloss levels. view less | |
| Epoxy Hardener G-92 | Worlée-Chemie G.m.b.H. | Epoxy Hardener G-92 is a catalyzed phenolic curing agent for use with epoxy and epoxy novolac resins. Powder coatings made with Epoxy Hardener G-92 will exhibit the excellent chemical resistance and mechanical properties for which phenolic epoxy coatings ...view more Epoxy Hardener G-92 is a catalyzed phenolic curing agent for use with epoxy and epoxy novolac resins. Powder coatings made with Epoxy Hardener G-92 will exhibit the excellent chemical resistance and mechanical properties for which phenolic epoxy coatings are noted. Epoxy Hardener G-92 allows the formulator the versatility of using differing cure cycles while maintaining performance properties. For example, powder coatings made with Epoxy Hardener G-92 can be “snap” cured in 2 minutes at 200 °C or low temperature cured in 20 minutes at 120 °C while maintaining both mechanical (160 reverse inch pounds impact) and chemical resistance (100+ MEK double rubs) properties. view less | |
| ESCAT 50 | Worlée-Chemie G.m.b.H. | ESCAT 50 is a substituted imidazole catalyst masterbatched at 50% active level in castor wax. Masterbatching the catalyst in castor wax improves the compatibility during extrusion, which helps to assure its uniform distribution in a powder coating. ESCAT ...view more ESCAT 50 is a substituted imidazole catalyst masterbatched at 50% active level in castor wax. Masterbatching the catalyst in castor wax improves the compatibility during extrusion, which helps to assure its uniform distribution in a powder coating. ESCAT 50 is used in powder coatings to accelerate the cure of systems based on the reaction of an epoxy functional resin with a carboxyl functional curing agent. Typical systems are epoxy/polyester hybrids, epoxy/acrylic hybrids, TGIC/polyester systems and epoxy-functional acrylic/carboxyl-functional curing agent systems. It can also be used to accelerate the cure of epoxy systems that are cured by dicyanamide. view less | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...view more Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. view less | |
| Isocryl EP-570 | Worlée-Chemie G.m.b.H. | Isocryl EP-570 is a glycidyl-functional acrylic crosslinker used for the gloss modification of exterior-durable powder coatings. As with W´Cryl CP 550, "one-shot” low gloss coatings can be produced with Isocryl EP-570 in conjunction with 30 - 35 acid valu...view more Isocryl EP-570 is a glycidyl-functional acrylic crosslinker used for the gloss modification of exterior-durable powder coatings. As with W´Cryl CP 550, "one-shot” low gloss coatings can be produced with Isocryl EP-570 in conjunction with 30 - 35 acid value polyesters. A key advantage of Isocryl EP-570 is its improved burnish resistance over other matting acrylics. Additionally, Isocryl EP-570 has been designed to substantially improve compatibility with polyester/TGIC and hybrid powder coatings. view less | |
| MDI CI 15/10000 | Castor International BV | MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solven...view more MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 15/10000 has an approximate equivalent weight of 280 g/mol with a viscosity of 10000 mPa.s at 23°C. view less | |
| MDI CI 16/1800 | Castor International BV | MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 16/1800 has an approximate equivalent weight of 262 g/mol with a viscosity of 1800 mPa.s at 23°C. view less | |
| MDI CI 22/1500 | Castor International BV | MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 22/1500 has an approximate equivalent weight of 191 g/mol with a viscosity of 1500 mPa.s at 23°C. view less | |
| MDI CI 25/1200 | Castor International BV | MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 25/1200 has an approximate equivalent weight of 168 g/mol with a viscosity of 1200 mPa.s at 23°C. view less | |
| MDI CI 32/120 | Castor International BV | MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...view more MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/120 has an approximate equivalent weight of 126 g/mol with a viscosity of 120 mPa.s at 23°C. view less | |
| MDI CI 32/200 | Castor International BV | MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...view more MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/200 has an approximate equivalent weight of 125 g/mol with a viscosity of 200 mPa.s at 23°C. view less | |
| MDI CI 32/40 | Castor International BV | MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-f...view more MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/40 has an approximate equivalent weight of 129 g/mol with a viscosity of 40 mPa.s at 23°C. view less | |
| Partially Dehydrated Castor Oil | Castor International BV | Partially Dehydrated Castor Oil is created when part of the chemically combined water, has been removed. Heating the oil in the presence of catalysts such as clay's and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out....view more Partially Dehydrated Castor Oil is created when part of the chemically combined water, has been removed. Heating the oil in the presence of catalysts such as clay's and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Partially Dehydrated Castor Oil has a characteristic odor and is a yellow oily liquid. It has an acid value of 5 mg KOH/g max and can be used as a hydrophobic and plasticizer component in paints, coatings, and moldings. view less | |
| PEG-25-CO | Castor International BV | PEG-25-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-CO has a HLB ...view more PEG-25-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-CO has a HLB of approximately 11, a saponification value of 70 to 90, and an iodine value of 30 to 50. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-25-HCO | Castor International BV | PEG-25-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25...view more PEG-25-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-HCO has a HLB of approximately 11 and a saponification value of 70 to 90. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-40-CO | Castor International BV | PEG-40-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-CO has a HLB ...view more PEG-40-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-CO has a HLB of approximately 14, a saponification value of 45 to 69, and an iodine value of 20 to 35. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-40-HCO | Castor International BV | PEG-40-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40...view more PEG-40-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-HCO has a HLB of approximately 14 and a saponification value of 45 to 69. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-60-CO | Castor International BV | PEG-60-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-CO has a HLB ...view more PEG-60-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-CO has a HLB of approximately 16, a saponification value of 40 to 51, and an iodine value of 15 to 30. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-60-HCO | Castor International BV | PEG-60-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60...view more PEG-60-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-HCO has a HLB of approximately 16 and a saponification value of 40 to 51. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-7-CO | Castor International BV | PEG-7-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-CO has a HLB of...view more PEG-7-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-CO has a HLB of approximately 5, a saponification value of 125 to 140, and an iodine value of 55 to 75. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-7-HCO | Castor International BV | PEG-7-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-H...view more PEG-7-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-HCO has a HLB of approximately 5 and a saponification value of 125 to 140. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| Polyol CI 1200/10 | Castor International BV | Polyol CI 1200/10, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1300 mPa.s, and is harmless. Polyol CI 1200/10 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, ...view more Polyol CI 1200/10, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1300 mPa.s, and is harmless. Polyol CI 1200/10 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/1200 | Castor International BV | Polyol CI 1200/1200, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 500 mPa.s, and is harmless. Polyol CI 1200/1200 is used for adhesives, coatings, polyurethane cast moldings in combination with TD...view more Polyol CI 1200/1200, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 500 mPa.s, and is harmless. Polyol CI 1200/1200 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/240 | Castor International BV | Polyol CI 1200/240, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1050 mPa.s, and is harmless. Polyol CI 1200/240 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI...view more Polyol CI 1200/240, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1050 mPa.s, and is harmless. Polyol CI 1200/240 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/3600 | Castor International BV | Polyol CI 1200/3600, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 350 mPa.s, and is harmless. Polyol CI 1200/3600 is used for adhesives, coatings, polyurethane cast moldings in combination with TD...view more Polyol CI 1200/3600, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 350 mPa.s, and is harmless. Polyol CI 1200/3600 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/400 | Castor International BV | Polyol CI 1200/400, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 750 mPa.s, and is harmless. Polyol CI 1200/400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI,...view more Polyol CI 1200/400, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 750 mPa.s, and is harmless. Polyol CI 1200/400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 29/825 | Castor International BV | Polyol CI 29/825, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 825 mPa.s, and is harmless. Polyol CI 29/825 is used for adhesives, sealants, coatings, polyurethane moldings (...view more Polyol CI 29/825, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 825 mPa.s, and is harmless. Polyol CI 29/825 is used for adhesives, sealants, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 400/400 | Castor International BV | Polyol CI 400/400, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 400 mPa.s, and is harmless. Polyol CI 400/400 is used for adhesives, coatings, polyurethane moldings (CASE app...view more Polyol CI 400/400, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 400 mPa.s, and is harmless. Polyol CI 400/400 is used for adhesives, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 55/375 | Castor International BV | Polyol CI 55/375, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 375 mPa.s, and is harmless. Polyol CI 55/375 is used for adhesives, coatings, polyurethane moldings (CASE appli...view more Polyol CI 55/375, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 375 mPa.s, and is harmless. Polyol CI 55/375 is used for adhesives, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI T-400 | Castor International BV | Polyol CI T-400, a hydrolysis resistant, hydrophobic polyether triol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI T-400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, ...view more Polyol CI T-400, a hydrolysis resistant, hydrophobic polyether triol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI T-400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI X-630/1000 | Castor International BV | Polyol CI X-630/1000, a hydrolysis resistant, hydrophobic tetrafunctional polyether polyol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI X-630/1000 is used for adhesives, coatings, polyurethane cast moldings in combin...view more Polyol CI X-630/1000, a hydrolysis resistant, hydrophobic tetrafunctional polyether polyol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI X-630/1000 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Resiflow CP 77 | Worlée-Chemie G.m.b.H. | Resiflow CP 77 is a free flowing powder used as a flow control agent and especially as an anti-cratering agent in powder coating applications. It is based on liquid oligomer converted into free flowing powder by adsorbing it on a silica carrier. Resiflow ...view more Resiflow CP 77 is a free flowing powder used as a flow control agent and especially as an anti-cratering agent in powder coating applications. It is based on liquid oligomer converted into free flowing powder by adsorbing it on a silica carrier. Resiflow CP 77 can also be used in powder clear coats as the transparency is barely influenced. The usual surface defects such as orange peel effect, pinholes, craters and other imperfections can be eliminated by incorporating 0.5 -1.5% of Resiflow CP 77. view less | |
| Resiflow FK 70 | Worlée-Chemie G.m.b.H. | Resiflow FK 70 is a silicone free, anti-flooding and flow agent which is also an amino resin modified acrylic copolymer that prevents flooding in polyester/melamine based paints which contain critical pigment blends. Resiflow FK 70 is especially developed...view more Resiflow FK 70 is a silicone free, anti-flooding and flow agent which is also an amino resin modified acrylic copolymer that prevents flooding in polyester/melamine based paints which contain critical pigment blends. Resiflow FK 70 is especially developed for solvent based, oven drying coatings. view less | |
| Resiflow FL 2 | Worlée-Chemie G.m.b.H. | Resiflow FL 2 is a silicone free, polymeric flow control agent and resin modifier used as an additive to correct imperfections in coatings and printing ink formulations. Craters, pin holes and fisheyes may be eliminated or substantially reduced by incorpo...view more Resiflow FL 2 is a silicone free, polymeric flow control agent and resin modifier used as an additive to correct imperfections in coatings and printing ink formulations. Craters, pin holes and fisheyes may be eliminated or substantially reduced by incorporating 0.2 - 2.0% of the agent into total formulation. Resiflow FL 2 is designed for powder coatings, solvent based coatings, high solids, coil coatings and UV-coatings. Printing inks based on flexographic or silk screen have also shown improved characteristics. view less | |
| Resiflow FL 9 | Worlée-Chemie G.m.b.H. | Resiflow FL 9 is a silicone free acrylic oligomer used to improve flow, eliminate orange peel effect, pinholes, craters, and other surface defects on coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellu...view more Resiflow FL 9 is a silicone free acrylic oligomer used to improve flow, eliminate orange peel effect, pinholes, craters, and other surface defects on coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellulose lacquers and other systems. Resiflow FL 9 will react with most thermosetting resins to form a cross linked system. It exhibits excellent hydrolytic stability and outdoor durability and does not yellow or lose gloss when exposed to UV radiation. view less | |
| Resiflow FM 4 | Worlée-Chemie G.m.b.H. | Resiflow FM 4 is an acrylic based additive used in solvent based coatings, high solids, coil coatings, and powder systems. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additional...view more Resiflow FM 4 is an acrylic based additive used in solvent based coatings, high solids, coil coatings, and powder systems. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additionally it exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose gloss when exposed to UV-radiation. The method of incorporating this additive into coating systems does not affect its performance as long as it is uniformly dispersed in the system. This can be easily achieved by mixing Resiflow FM 4 with the other paint ingredients. view less | |
| Resiflow FM 4-50 | Worlée-Chemie G.m.b.H. | Resiflow FM 4-50 is an acrylic based additive, solved in xylene and used in solvent based coatings, high solids, coil coatings etc. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. A...view more Resiflow FM 4-50 is an acrylic based additive, solved in xylene and used in solvent based coatings, high solids, coil coatings etc. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additionally, it exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose gloss when exposed to UV-radiation. Resiflow FM 4-50 is silicone free and thus does not negatively influence the intercoat adhesion and recoatability. view less | |
| Resiflow L-3075 | Worlée-Chemie G.m.b.H. | Resiflow L-3075 is a special acrylic polymer for use in coil coating systems. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve film characteristics. Resiflow L-3075 exhibits excellent hyd...view more Resiflow L-3075 is a special acrylic polymer for use in coil coating systems. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve film characteristics. Resiflow L-3075 exhibits excellent hydrolytic stability and outdoor durability and does not yellow or lose gloss when exposed to UV radiation. This product is used to eliminate air entrapment, foam, orange peel, pinholes, craters and improve stain resistance characteristics. It can be used in polyesters, acrylics, alkyds, phenolics, epoxies, polyurethanes, nitrocellulose lacquers and other systems. view less | |
| Resiflow L-66F | Worlée-Chemie G.m.b.H. | Resiflow L-66F is an acrylic polymer used in high solids, UV curing, coil and powder coatings systems. It has been specifically designed to provide excellent clarity in clear non-pigmented coatings. This clear viscous liquid is used to improve flow and el...view more Resiflow L-66F is an acrylic polymer used in high solids, UV curing, coil and powder coatings systems. It has been specifically designed to provide excellent clarity in clear non-pigmented coatings. This clear viscous liquid is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve the flexibility of coatings. view less | |
| Resiflow LH 241 | Worlée-Chemie G.m.b.H. | Resiflow LH 241 is a non-silicone, acrylic flow control additive. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections and improve film characteristics against stain without affecting flexibility. Additio...view more Resiflow LH 241 is a non-silicone, acrylic flow control additive. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections and improve film characteristics against stain without affecting flexibility. Additionally, Resiflow LH 241 is functional and self-crosslinking. During the cure cycle, it can react with the binder system of the thermoset coating and also crosslink with itself. Resiflow LH 241 is used to eliminate air entrapment, foam, orange peel, pinholes, craters and enhance resistance against dirt and stain. It can be used in polyester melamine, acrylics, alkyds, phenolics, epoxies, polyurethanes and other systems. view less | |
| Resiflow LH-240 | Worlée-Chemie G.m.b.H. | Resiflow LH-240 is a surface active oligomer used in solvent based, high solids and powder coating formulations. If applied at effective concentrations, it eliminates problems associated with degassing during film formation, will correct surface imperfect...view more Resiflow LH-240 is a surface active oligomer used in solvent based, high solids and powder coating formulations. If applied at effective concentrations, it eliminates problems associated with degassing during film formation, will correct surface imperfections, and improves flexibility of the coatings. Resiflow LH-240 is used to promote flow, eliminate orange-peel effect, pinholes, craters, and other surface defects in coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellulose lacquers and other systems. view less | |
| Resiflow LW | Worlée-Chemie G.m.b.H. | Resiflow LW is a silicone free, polymeric flow control agent used in so called high solid coatings, one component as well as two component systems. If applied at an effective concentration it will correct surface imperfections and improve flexibility of c...view more Resiflow LW is a silicone free, polymeric flow control agent used in so called high solid coatings, one component as well as two component systems. If applied at an effective concentration it will correct surface imperfections and improve flexibility of coatings. Resiflow LW exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose its gloss when exposed to UV-radiation. view less | |
| Resiflow P 67 | Worlée-Chemie G.m.b.H. | Resiflow P 67 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flo...view more Resiflow P 67 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flowing powder by absorbing it onto a silica carrier. Resiflow P 67 is convenient in handling and reliable in performance. It is also a UV stable product with excellent outdoor durability. view less | |
| Resiflow P-64F | Worlée-Chemie G.m.b.H. | Resiflow P-64F is an acrylic flow control agent designed for powder coating systems. It is based on a liquid polymer which has been converted into free-flowing powder by absorption onto a specific silica filler. Resiflow P-64F has been specifically design...view more Resiflow P-64F is an acrylic flow control agent designed for powder coating systems. It is based on a liquid polymer which has been converted into free-flowing powder by absorption onto a specific silica filler. Resiflow P-64F has been specifically designed to provide outstanding clarity in clear acrylic powder coatings. If applied at effective concentrations, it will correct surface imperfections and provide a smooth film with high distinctiveness of image (DOI). view less | |
| Resiflow P-65F | Worlée-Chemie G.m.b.H. | Resiflow P-65F is a free-flowing powder used as a flow agent in powder coating applications. It is based on a liquid polymer converted into free-flowing powder by adsorbing it on a silica carrier. Resiflow P-65F is used to improve flow and eliminate air e...view more Resiflow P-65F is a free-flowing powder used as a flow agent in powder coating applications. It is based on a liquid polymer converted into free-flowing powder by adsorbing it on a silica carrier. Resiflow P-65F is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters, and other surface defects. view less | |
| Resiflow PH-240 | Worlée-Chemie G.m.b.H. | Resiflow PH-240 is a free flowing powder used as a flow control agent in powder coating formulations. This additive is designed to meet the most difficult processing and application requirements. Resiflow PH-240 is recommended for hybrid as well as for pr...view more Resiflow PH-240 is a free flowing powder used as a flow control agent in powder coating formulations. This additive is designed to meet the most difficult processing and application requirements. Resiflow PH-240 is recommended for hybrid as well as for primid and polyurethane, powder coatings, especially polyurethane clear coats. This product is used in epoxy, hybrid-, polyester-, polyurethanes and other powder coatings. view less | |
| Resiflow PL 200 | Worlée-Chemie G.m.b.H. | Resiflow PL-200 is a silicone free acrylic flow control agent for epoxy-, polyester-, acrylic resin, hybrid and other powder coating systems. The addition of Resiflow PL-200 improves the adhesion to substrate, deairing, flow and recoatability and avoids s...view more Resiflow PL-200 is a silicone free acrylic flow control agent for epoxy-, polyester-, acrylic resin, hybrid and other powder coating systems. The addition of Resiflow PL-200 improves the adhesion to substrate, deairing, flow and recoatability and avoids surface imperfections as craters, pin-holes, orange peel effect etc. This product appears as a white powder. view less | |
| Resiflow PV 5 | Worlée-Chemie G.m.b.H. | Resiflow PV 5 is a white, free flowing powder specifically developed as a flow and levelling control agent to correct surface imperfections in powder coating and injection molding systems. It is recommended as a flow promoting agent for powder coating and...view more Resiflow PV 5 is a white, free flowing powder specifically developed as a flow and levelling control agent to correct surface imperfections in powder coating and injection molding systems. It is recommended as a flow promoting agent for powder coating and injection molding compositions based on acrylic, epoxy, polyester and polyurethane resins. Resiflow PV 5 is also suitable for hybrid systems and polyester/glycoluril powder coatings. view less | |
| Resiflow PV 88 | Worlée-Chemie G.m.b.H. | Resiflow PV 88 is a white, free-flowing powder flow and levelling agent especially developed to correct surface imperfections in powder and injection molding systems. It is a UV-stable product with excellent outdoor durability. Resiflow PV 88 is recommend...view more Resiflow PV 88 is a white, free-flowing powder flow and levelling agent especially developed to correct surface imperfections in powder and injection molding systems. It is a UV-stable product with excellent outdoor durability. Resiflow PV 88 is recommended as a flow promoting agent for powder coating and injection molding compositions based on e.g. acrylic, epoxy, polyester, hybrid and polyurethane resins. Resiflow PV 88 is also suitable for polyester/glycoluril powder coatings. view less | |
| Resiflow W 51 | Worlée-Chemie G.m.b.H. | Resiflow W 51 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This grade...view more Resiflow W 51 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This grade appears as a medium viscous liquid. Resiflow W 51 is suitable for solvent as well as for water based coatings and inks view less | |
| Resiflow W 52 | Worlée-Chemie G.m.b.H. | Resiflow W 52 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carbo...view more Resiflow W 52 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carboxylic polymer can be made water soluble by neutralization with an organic amine or ammonia. Pinholes, craters, pores, fish eyes, roller marks, orange peel effect and other surface imperfections can be eliminated or substantially reduced. view less | |
| Resiflow W 5200 | Worlée-Chemie G.m.b.H. | Resiflow W 5200 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This car...view more Resiflow W 5200 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carboxylic polymer can be made water soluble by neutralisation with an organic amine or ammonia. Pinholes, craters, pores, fish eyes, roller marks, orange peel effect and other surface imperfections can be eliminated or substantially reduced. view less | |
| Ricinoleic Acid (RA) | Castor International BV | Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal ...view more Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal working fluids, cutting oils, emulsifiers, and industrial lubricants; Surface coating: used as a pigment/dye dispersants in plastics, inks, coatings, etc.; Textiles: providing surface wetting and lubricity, and polarity. view less | |
| Special-Primer AP 1010 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, an...view more Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. view less | |
| Special-Primer AP 1030 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used ...view more Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used to solve adhesion problems to flexible substrates like thermoplastic elastomers, thermoplastic polyurethane and EPDM (e.g. "Vistalon" from Exxon, "Nordel" from DuPont). After coating with a thin film of Special-Primer AP 1030, these flexible substrates can be painted, printed, glued or labelled. Special-Primer AP 1030 is tinted white for black substrates. view less | |
| Special-Primer PE 6800 | Worlée-Chemie G.m.b.H. | Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Spec...view more Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Special Primer PE 6800 is suitable as an adhesion promoter for polyethylene of high, medium and low density (lowdensity-polyethylene). This product appears as a yellowish to brown, low viscous liquid. view less | |
| Special-Primer PP 3200 W | Worlée-Chemie G.m.b.H. | Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brown...view more Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brownish turbid liquid. Special-Primer PP 3200 W can be used as adhesion promoter by incorporation in adhesives, inks and paints in case of sufficient compatibility or diluted down to 10% solid content as primer. view less | |
| Special-Primer PP 5130 (2.5% I Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled po...view more Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 5130 (5% In Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlo...view more Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlorinated rubber and some vinyl copolymer resins. It is only soluble in aromatics and chlorinated hydrocarbons. There is limited solubility in aliphatic hydrocarbons. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 7550 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in a...view more Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in aromatics and chlorinated hydrocarbons. It is possible to blend with other solvents like esters, ketones etc.. This product appears as a yellowish, low viscous liquid. view less | |
| Special-Primer PP 7560 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Sp...view more Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Special-Primer PP 7560 is superior to Special-Primer PP 5130. This product appears as a yellowish, low viscous liquid. view less | |
| Sulphonated Castor Oil (SCO) | Castor International BV | Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling ag...view more Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling agent. Sulphonated Castor Oil (SCO) is used as a dispersion and pigment wetting application in the paint industry, and as leveling and dye dispersion in the inks industry, among others. view less | |
| WorléeAdd 100 | Worlée-Chemie G.m.b.H. | WorléeAdd 100 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in coating and printing ink formulations. Craters, pinholes and fisheyes may be eliminated or substantially reduced by incorporating 0,...view more WorléeAdd 100 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in coating and printing ink formulations. Craters, pinholes and fisheyes may be eliminated or substantially reduced by incorporating 0,3 - 1 % of the agent in the formulation. W´Add 100 is stable to UV radiation and since it is silicone-free, the initial and recoating adhesion is normally not effected. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, alkyd, urethane and other systems. view less | |
| WorléeAdd 101 | Worlée-Chemie G.m.b.H. | WorléeAdd 101 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in powder coating formulations. By addition of W´Add 101 the initial and intercoat adhesion normally is not affected. The unique chemic...view more WorléeAdd 101 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in powder coating formulations. By addition of W´Add 101 the initial and intercoat adhesion normally is not affected. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, urethane resins and other systems. With higher additions W´Add 101 works as a plasticizer. view less | |
| WorléeAdd 101 P | Worlée-Chemie G.m.b.H. | WorléeAdd 101 P is a white, free-flowing powder flow and leveling agent especially developed to correct surface imperfections in powder and injection molding systems. The unique chemical structure of this product renders it suitable for epoxy, polyester, ...view more WorléeAdd 101 P is a white, free-flowing powder flow and leveling agent especially developed to correct surface imperfections in powder and injection molding systems. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, urethane resins and other systems. With higher additions W´Add 101 works as plasticizer. W´Add 101 is used to improve levelling and to avoid surface imperfections as orange peel effect, cratering, Benard's cells etc.. This product is also UV-stable. view less | |
| WorléeAdd 1200 | Worlée-Chemie G.m.b.H. | WorléeAdd 1200 is a synthetic wax to provide excellent stability against buff resistance, slip properties, and to improve the water and mar resistance. W´Add 1200 can be used in solvent based, aqueous and also UV-curing systems and powder coatings. This p...view more WorléeAdd 1200 is a synthetic wax to provide excellent stability against buff resistance, slip properties, and to improve the water and mar resistance. W´Add 1200 can be used in solvent based, aqueous and also UV-curing systems and powder coatings. This product appears as a fine white powder. view less | |
| WorléeAdd 1500 | Worlée-Chemie G.m.b.H. | WorléeAdd 1500 is a dimethylsiloxane additive for use in gravure inks, offset printing inks, and overprint inks. It is a viscous liquid water white/slightly yellowish substance. This product is soluble in mineral oil, aliphatic and aromatic hydrocarbons. | |
| WorléeAdd 18 | Worlée-Chemie G.m.b.H. | WorléeAdd 18 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flow...view more WorléeAdd 18 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flowing powder by absorbing it onto a fine particle size silica carrier. view less | |
| WorléeAdd 2000 | Worlée-Chemie G.m.b.H. | WorléeAdd 2000 is a catalyst which can be used in solvent based as well as in aqueous isocyanate cross-linked polyols, hydroxy acrylates, and polyesters. This catalyst is used for a remarkable reduction of drying time, especially tack-freeness. It appears...view more WorléeAdd 2000 is a catalyst which can be used in solvent based as well as in aqueous isocyanate cross-linked polyols, hydroxy acrylates, and polyesters. This catalyst is used for a remarkable reduction of drying time, especially tack-freeness. It appears as a clear to slightly turbid, yellowish low viscous liquid. view less | |
| WorléeAdd 2030 | Worlée-Chemie G.m.b.H. | WorléeAdd 2030 is a 28% solution of an aromatic disulfonic acid in isobutanol / methoxy propyl acetate (MPA). It is a clear, yellow liquid which is used as a catalyst for promoting the cure of solvent and water based stoving finishes. The advantages compa...view more WorléeAdd 2030 is a 28% solution of an aromatic disulfonic acid in isobutanol / methoxy propyl acetate (MPA). It is a clear, yellow liquid which is used as a catalyst for promoting the cure of solvent and water based stoving finishes. The advantages compared to para-toluene sulfonic acid are improved water, saltspray and detergent resistance at lower temperatures, higher electrical resistance and less corrosion of application equipment, higher gloss of the cured paint film and better stability of the paints. view less | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems ...view more WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. view less | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surfa...view more WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surface imperfections like Benard's cells, brush marks etc. are avoided. Typical application fields are air drying alkyd resin paints for decorative, DIY and industrial application. view less | |
| WorléeAdd 312 | Worlée-Chemie G.m.b.H. | WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to incr...view more WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to increase the mar resistance of water and solvent based air drying and stoving paint films by reducing surface tension of the coating and imparting a high degree of slip and improving flow out. view less | |
| WorléeAdd 315 | Worlée-Chemie G.m.b.H. | WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a cle...view more WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a clear to slightly yellow liquid. view less | |
| WorléeAdd 317 | Worlée-Chemie G.m.b.H. | WorléeAdd 317 is a modified silicone additive used to improve the characteristics of solvent based paints and printing inks, e.g. all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for imparting optimum sur...view more WorléeAdd 317 is a modified silicone additive used to improve the characteristics of solvent based paints and printing inks, e.g. all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for imparting optimum surface properties to decorative paints, stoving enamels and metallic car paints. W´Add 317 improves the mar resistance and surface wetting of solvent based furniture lacquers of different composition. view less | |
| WorléeAdd 327 | Worlée-Chemie G.m.b.H. | WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total fo...view more WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total formulation). view less |
