| Efka® 3277 | BASF Formulation Additives | Efka® 3277 is a fluorocarbon-modified polymer that improves leveling and prevents cratering. It also helps substrate wetting and acts as a defoamer and de-aeration aid. Efka® 3277 is particularly suited for: baking enamels based on alkyd, acrylic or polye...view more Efka® 3277 is a fluorocarbon-modified polymer that improves leveling and prevents cratering. It also helps substrate wetting and acts as a defoamer and de-aeration aid. Efka® 3277 is particularly suited for: baking enamels based on alkyd, acrylic or polyester resins, polyurethane coatings, two-pack epoxy compounds, and air-drying alkyd systems. view less | |
| Efka® 3570 | BASF Formulation Additives | Efka® 3570 is a fluorcarbon modified polyacrylate neutralized with DMEA and dissolved in water. The use of Efka® 3570 gives the following advantages: excellent anti-cratering behavior, better substrate wetting, improved leveling, and no intercoat adhesion...view more Efka® 3570 is a fluorcarbon modified polyacrylate neutralized with DMEA and dissolved in water. The use of Efka® 3570 gives the following advantages: excellent anti-cratering behavior, better substrate wetting, improved leveling, and no intercoat adhesion problems. This slightly hazy, yellowish liquid is recommended for use in all kinds of water-based coatings with a pH value > 7.6. view less | |
| Efka® 3777 N | BASF Formulation Additives | Efka® 3777 N is a fluorocarbon-modified polymer used as a slip and leveling agent. It improves leveling, prevents cratering, helps substrate wetting acts as a defoamer and de-aeration aid, and does not interfere with intercoat adhesion. | |
| Hydropalat® 1080 | BASF Formulation Additives | Hydropalat® 1080 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. Hydropalat® 1080 a...view more Hydropalat® 1080 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. Hydropalat® 1080 also provides outstanding flow properties even at high pigment load. In topcoats based on different binder types Hydropalat® 1080 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. This product also shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions. view less | |
| Hydropalat® 110 | BASF Formulation Additives | Hydropalat® 110 is a substrate wetting agent for aqueous industrial, wood, automotive coatings, printing inks strong reduction of the dynamic surface tension. This product is recommended as a low foaming surfactant and substrate wetting agent for systems ...view more Hydropalat® 110 is a substrate wetting agent for aqueous industrial, wood, automotive coatings, printing inks strong reduction of the dynamic surface tension. This product is recommended as a low foaming surfactant and substrate wetting agent for systems which are subjected to high mechanical stresses. view less | |
| Hydropalat® 120 | BASF Formulation Additives | Hydropalat® 120 is a low-foaming wetting agent for the printing inks and adhesives industry. It can be used in the formulation of low foaming surfactant blends, especially these subjected to foam promoting mechanical energy. Hydropalat® 120 can also act a...view more Hydropalat® 120 is a low-foaming wetting agent for the printing inks and adhesives industry. It can be used in the formulation of low foaming surfactant blends, especially these subjected to foam promoting mechanical energy. Hydropalat® 120 can also act as a good antifoam agent in numerous applications. view less | |
| Hydropalat® 140 | BASF Formulation Additives | Hydropalat® 140 is a low-foam flow promoter and substrate wetting agent for aqueous paints and coatings is based on organo modified polysiloxane. compared with substrate wetting agents based on other chemicals, such as block copolymers (Hydropalat® 110, 1...view more Hydropalat® 140 is a low-foam flow promoter and substrate wetting agent for aqueous paints and coatings is based on organo modified polysiloxane. compared with substrate wetting agents based on other chemicals, such as block copolymers (Hydropalat® 110, 130), sulfosuccinates (Hydropalat® 875) or acetylene diol derivatives, Hydropalat® 140 brings about a much greater reduction in static interfacial tension. Even when it is present in a concentration of 0.5%, values much lower than 25 mN/m can be achieved. view less | |
| HYDROPALAT® 3065 | BASF Formulation Additives | A wetting and dispersing agent for aqueous coatings and pigment pastes, more hydrophilic than HYDROPALAT 1080. | |
| HYDROPALAT® 5040 | BASF Formulation Additives | A wetting and dispersing agent to optimize the dispersing process of pigments and fillers in aqueous system like emulsion paints (matt to glossy), pigment and filler slurries, pigment pastes, ceramics, etc. | |
| HYDROPALAT® 875 PG | BASF Formulation Additives | Highly efficient wetting agent consisting of sulfocarbon acid ester, sodium salt in water / propylenglycol. | |
| Hydropalat® 88 | BASF Formulation Additives | Hydropalat® 88 is a wetting- and dispersing agent for aqueous coatings and printing inks, modified ester of sulfocarboxylic acid. This product is characterized by its excellent solubility in water and its optimal compatibility in different polymer systems...view more Hydropalat® 88 is a wetting- and dispersing agent for aqueous coatings and printing inks, modified ester of sulfocarboxylic acid. This product is characterized by its excellent solubility in water and its optimal compatibility in different polymer systems. Hydropalat® 88 contains none of the flammable cosolvents needed to improve the solubility of other, conventional sulfocarboxylic acid-based surfactants. Hydropalat® 88, with a flash point of > 100 °C, is therefore not a dangerous substance as defined in the applicable transport regulations. The absence of highly volatile consolvents gives Hydropalat 88 obvious advantages in term of ease of handling. It does not show troublesome skin formation on the product surface, which can occur spontaneously in concentrated surfactant formulations that contain solvents. view less | |
| HYDROPALAT® 885 | BASF Formulation Additives | Wetting agent for aqueous paint systems. | |
| HYDROPALAT® 886 | BASF Formulation Additives | Highly effective, concentrated wetting agent for water based coatings and printing inks. | |
| HYDROPALAT® P | BASF Formulation Additives | Non ionic powdered wetting and dispersing agent for plasters, mortars, fillers and tile adhesives etc. based on oleo-alkylenoxide-block copolymer coated on silica. | |
| Texaphor® P 63 | BASF Formulation Additives | Texaphor® P 63 is a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. This yellowish liquid is a modified polyurethane. Texaphor® P 63 reduces the dispersing time ...view more Texaphor® P 63 is a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. This yellowish liquid is a modified polyurethane. Texaphor® P 63 reduces the dispersing time and the mill base viscosity and thus facilitates the formulation of highly concentrated pigment pastes. After the pigment paste has been blended into paint, Texaphor® P 63 prevents flooding and floating of pigments and promotes excellent gloss and high color intensity. This product is readily compatible with a wide range of binder types. Pigment pastes based on Texaphor® P 63 can therefore be used in 2-component polyurethane paints, 2 - component epoxy paints, unsaturated polyester, stoving paints and air drying paints. view less | |
| Texaphor® SF 71 | BASF Formulation Additives | Texaphor® SF 71 is a wetting and dispersing agent for reactive resins. This colorless to pale yellow liquid is a mixture of ionic and nonionic esters. Its viscosity-reducing properties make it especially suitable for high and full solid systems. Texaphor®...view more Texaphor® SF 71 is a wetting and dispersing agent for reactive resins. This colorless to pale yellow liquid is a mixture of ionic and nonionic esters. Its viscosity-reducing properties make it especially suitable for high and full solid systems. Texaphor® SF 71 ensures that fillers are quickly and optimally dispersed. The reduction in viscosity enables fillers to be blended more easily and allows a higher filler content to be achieved. Texaphor® SF 71 is readily compatible with a wide variety of binder types and can therefore be used in 2-component PUR, 2-component EP and unsaturated polyester resins. view less |
