| A 135 | BIP (Oldbury) Ltd | A 135 is a non ionic polyethylene emulsion, in a low viscosity liquid. It is used primarily to improve tear strength and can be used on any fabric. | |
| A 154 | BIP (Oldbury) Ltd | A 154 is a modified dicyandiamide formaldehyde precondensate. It is a clear colourless cationic solution. It is primarily used to improve wet fastness of direct dyes. | |
| A 174 | BIP (Oldbury) Ltd | A 174 is a non re-wetting emulsifier. It is designed for use with water repellants and fluorochemical finishes. It an also be used as a foaming agent for use in foam finishing systems. | |
| A 199 | BIP (Oldbury) Ltd | A 199 is a permanent repellant for all fibre types. | |
| AC 108 | BIP (Oldbury) Ltd | AC 108 is a modified ammonium chloride catalyst. It is a neutral clear liquid solution with low reactivity. Primarily used as a catalyst for urea and melamine resins. | |
| AC 119 | BIP (Oldbury) Ltd | AC 119 is a modified magnesium chloride catalyst. In a highly reactivity, low PH clear solution. It has applications where high production speeds required. | |
| AC 178 | BIP (Oldbury) Ltd | AC 178 is a magnesium chloride catalyst. It has medium reactivity and is a clear solution. It is mainly used in medium cure catalyst having minimum effect on shade. | |
| AC 600 | BIP (Oldbury) Ltd | AC 600 is an amine salt of p-toluene sulphonic acid in isopropanol. It is a highly reactive, clear solution. Primarily recommended for use in curing HMMM resin PT 370. | |
| BCP | BIP (Oldbury) Ltd | BCP is a blend of waterbased synthetic polymers. Primarily used as a coating on fabric to prevent wrinkles. It can be used in conjunction with PT 939C or A 135 and can be used for single pass systems. | |
| BEETLE® PT312 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise wate...view more PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT312 will also increase the efficiency of the OBA used, particularly in all latex formulations. view less | |
| BEETLE® PT336 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders...view more PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT336 will also increase the efficiency of the OBA used, particularly in all latex formulations. view less | |
| BEETLE® PT355 - Wet Strength Resin | BIP (Oldbury) Ltd | PT355 is a chlorine-free, zero AOX, highly reactive and efficient methylated melamine formaldehyde resin. PT355 colloid is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envel...view more PT355 is a chlorine-free, zero AOX, highly reactive and efficient methylated melamine formaldehyde resin. PT355 colloid is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes, sack-krafts, laundry tags, tea-bag tissue, and label papers. When used under optimum conditions of pH (4.5 - 6.5) and heat input, the resin will also improve basic sheet dry strength. An added benefit is that PT355 colloid will enhance the performance of rosin sizing agents. view less | |
| BEETLE® PT746 - Neutral Cure Wet Strength Resin | BIP (Oldbury) Ltd | PT746 is a cationic, low AOX/DCP polyamide epichlorohydrin resin. Though specifically designed for the production of wet strengthened papers by wet-end application to the paper machine, the special characteristics of BEETLE resin PT746 yields a versatile,...view more PT746 is a cationic, low AOX/DCP polyamide epichlorohydrin resin. Though specifically designed for the production of wet strengthened papers by wet-end application to the paper machine, the special characteristics of BEETLE resin PT746 yields a versatile, multifunctional product, useful in other applications and areas of the paper-making process. PT746 is used to impart wet strength in the production of a wide variety of papers based upon all cellulosic or all synthetic furnishes, or blends of both fibre types, when used under neutral to alkaline conditions. Higher dry strength often results from the use of PT746, particularly where high or all synthetic fibre furnishes are involved. view less | |
| BEETLE® PT789 - Wet Strength Resin | BIP (Oldbury) Ltd | PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack...view more PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack-krafts, when such products are made at pH levels below neutral. Since PT789 is a melamine resin, it is particularly suited to the production of higher quality, more demanding paper products such as hot-filters, laundry-tag, currency, security and bottle label papers. view less | |
| Mowilith® DM 2 H | Celanese Emulsion Polymers | Mowilith® DM 2 H is an aqueous copolymer dispersion based on vinyl acetate and maleic acid dibutyl ester. It has both a good pigment compatibility and good pigment binding power. The emulsion is a suitable binder for the formulation of emulsion paints wit...view more Mowilith® DM 2 H is an aqueous copolymer dispersion based on vinyl acetate and maleic acid dibutyl ester. It has both a good pigment compatibility and good pigment binding power. The emulsion is a suitable binder for the formulation of emulsion paints with excellent weather resistance for wood and other substrates (weather protection paints). The paint films do not become brittle under the influence of humidity and show good water vapour permeability. view less | |
| Mowilith® LDM 1828 | Celanese Emulsion Polymers | Mowilith® LDM 1828 is an aqueous copolymer dispersion based on vinyl acetate, vinyl esters and ethylene. It is a raw material for industrial use, and is stabilized in cellulose derivatives and surfactants. | |
| Mowilith® LDM 1840 | Celanese Emulsion Polymers | Mowilith® LDM 1840 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Due to its good flexibility, water resistance, compatibility with cement and pigment binding power, Mowilith® LDM 1840 is a suitable binder for elastom...view more Mowilith® LDM 1840 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Due to its good flexibility, water resistance, compatibility with cement and pigment binding power, Mowilith® LDM 1840 is a suitable binder for elastomeric roof coatings. view less | |
| Mowilith® LDM 1852 | Celanese Emulsion Polymers | Mowilith® LDM 1852 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and ethylene. This product is especially suited for the formulation of interior medium pvc latex paints of low odour without any solvents and/or plasticizers. | |
| Mowilith® LDM 1865 | Celanese Emulsion Polymers | Mowilith® LDM 1865 is an aqueous polymer dispersion based on vinyl acetate, ethylene and methacrylic acid esters, free of solvents and plasticizers. Mowilith® LDM 1865 is especially suitable for the formulation of exterior coating systems of low odour and...view more Mowilith® LDM 1865 is an aqueous polymer dispersion based on vinyl acetate, ethylene and methacrylic acid esters, free of solvents and plasticizers. Mowilith® LDM 1865 is especially suitable for the formulation of exterior coating systems of low odour and without any solvents and/or plasticizers. Mowilith® LDM 1865 can also be used to formulate high quality and solvent-free interior satin paints with good block resistance. view less | |
| Mowilith® LDM 1871 | Celanese Emulsion Polymers | Mowilith® LDM 1871 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1871 is especially suited for the formulation of interior coating systems of low odour and without any solvents and/or plasticizers. Th...view more Mowilith® LDM 1871 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1871 is especially suited for the formulation of interior coating systems of low odour and without any solvents and/or plasticizers. The fields of application cover high pvc paints with outstanding scrub resistance as well as latex paints with good anti-blocking properties. view less | |
| Mowilith® LDM 1880 | Celanese Emulsion Polymers | Mowilith® LDM 1880 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1880 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and with...view more Mowilith® LDM 1880 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1880 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and without any solvents and/or plasticizers. The fields of application cover high pvc paints with outstanding scrub resistance as well as latex paints with good anti-blocking properties. view less | |
| Mowilith® LDM 1881 | Celanese Emulsion Polymers | Mowilith® LDM 1881 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1881 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and witho...view more Mowilith® LDM 1881 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1881 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and without any solvents and/or plasticizers. The fields of application cover high pvc paints with outstanding scrub resistance as well as latex paints with good anti-blocking properties. view less | |
| Mowilith® LDM 2110 | Celanese Emulsion Polymers | Mowilith® LDM 2110 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2110 has a broad application spectrum such as interior and exterior paints, deep shade paints as well as resin-boun...view more Mowilith® LDM 2110 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2110 has a broad application spectrum such as interior and exterior paints, deep shade paints as well as resin-bound plasters and textured coatings. A very special possible application area is the formulation of lime finishes. view less | |
| Mowilith® LDM 2301 | Celanese Emulsion Polymers | Mowilith® LDM 2301 is an aqueous copolymer dispersion based on vinyl acetate and vinyl neodecanoate. It is a raw material for industrial use, and is stabilized in cellulose derivatives and surfactants. | |
| Mowilith® LDM 2383 | Celanese Emulsion Polymers | Mowilith® LDM 2383 is non-plasticized aqueous polymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2383 is also suited for the formulation of semi gloss interior and exterior paints with a higher amount of binder. In t...view more Mowilith® LDM 2383 is non-plasticized aqueous polymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2383 is also suited for the formulation of semi gloss interior and exterior paints with a higher amount of binder. In these applications, it boasts excellent wet scrub resistance combined with high gloss levels. For the painter, it offers good rheological behaviour and ease of application. view less | |
| Mowilith® LDM 2416 | Celanese Emulsion Polymers | Mowilith® LDM 2416 is a non-plasticized and ammonia-free aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2416 is especially suited for the formulation of interior and exterior paints, matt as well as sem...view more Mowilith® LDM 2416 is a non-plasticized and ammonia-free aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2416 is especially suited for the formulation of interior and exterior paints, matt as well as semi-gloss and thixotropic paints. The semigloss paints made with this dispersion have a good gloss level and a good rheological behaviour. view less | |
| Mowilith® LDM 2454 | Celanese Emulsion Polymers | Mowilith® LDM 2454 is an aqueous copolymer dispersion based on vinyl acetate, vinyl neodecanoate and (meth)acrylic acid esters. It is a raw material for the paints and coatings industry. It is used in the formulation of conventional matt interior paints, ...view more Mowilith® LDM 2454 is an aqueous copolymer dispersion based on vinyl acetate, vinyl neodecanoate and (meth)acrylic acid esters. It is a raw material for the paints and coatings industry. It is used in the formulation of conventional matt interior paints, conventional latex paints, masonry paints, deep shade paints, and more. Mowilith® LDM 2454 is a multi-purpose binder with several possible application areas, especially textured coatings, and it offers exceptionally high pigment binding power. view less | |
| Mowilith® LDM 6119 | Celanese Emulsion Polymers | Mowilith® LDM 6119 is a non-plasticized aqueous polymer dispersion based on styrene and an acrylic acid ester. Mowilith® LDM 6119 is a universal binder for all kinds of paints and resin-bound plasters with medium until high pigment volume concentrations. ...view more Mowilith® LDM 6119 is a non-plasticized aqueous polymer dispersion based on styrene and an acrylic acid ester. Mowilith® LDM 6119 is a universal binder for all kinds of paints and resin-bound plasters with medium until high pigment volume concentrations. The dispersion is especially suited for those applications which have high demands regarding water and alkali resistance. view less | |
| Mowilith® LDM 6159 | Celanese Emulsion Polymers | Mowilith® LDM 6159 is a non-plasticized aqueous copolymer dispersion based on acrylic acid esters and styrene. It is designed especially for the manufacture of stain-blocking primers and paints for use on wood, gypsum board or oriented strand board (OSP)....view more Mowilith® LDM 6159 is a non-plasticized aqueous copolymer dispersion based on acrylic acid esters and styrene. It is designed especially for the manufacture of stain-blocking primers and paints for use on wood, gypsum board or oriented strand board (OSP). Stain-blocking primers formulated with Mowilith® LDM 6159 feature good barrier properties against difficult stains such as tannin, grease or smoke in order to protect the top coat from discoloration. view less | |
| Mowilith® LDM 6482 | Celanese Emulsion Polymers | Mowilith® LDM 6482 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. It is also suitable for the formulation of crack-bridging and water-proof coating compounds and flexible roof coatings. | |
| Mowilith® LDM 6636 | Celanese Emulsion Polymers | Mowilith® LDM 6636 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. Mowilith® LDM 6636 was especially developed as binder for the formulation of high performance ceramic tile adhesives with excellent water resista...view more Mowilith® LDM 6636 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. Mowilith® LDM 6636 was especially developed as binder for the formulation of high performance ceramic tile adhesives with excellent water resistance. Such tile adhesives are important for bath rooms or kitchens, or in general such places with a high exposure to water. Usual fillers like silica or calcium carbonate may be used for the production of ceramic tile adhesives. Suitable wetting and dispersing agents are sodium hexametaphosphate or polyphosphates. view less | |
| Mowilith® LDM 6911 | Celanese Emulsion Polymers | Mowilith® LDM 6911 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. It is a universal binder for all kinds of solvent containing matt and semi matt paints for interior and exterior use. The dispersion is especially...view more Mowilith® LDM 6911 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. It is a universal binder for all kinds of solvent containing matt and semi matt paints for interior and exterior use. The dispersion is especially suited for those applications with high demands regarding water and alkali resistance. view less | |
| Mowilith® LDM 7281 | Celanese Emulsion Polymers | Mowilith® LDM 7281 is a non-plasticized aqueous polymer dispersion based on acrylic and methacrylic acid esters. The usual titanium dioxide and coloured pigments as well as fillers and texturing grains may be used for the formulation of paints and resin-b...view more Mowilith® LDM 7281 is a non-plasticized aqueous polymer dispersion based on acrylic and methacrylic acid esters. The usual titanium dioxide and coloured pigments as well as fillers and texturing grains may be used for the formulation of paints and resin-bound plasters. view less | |
| Mowilith® LDM 7411 | Celanese Emulsion Polymers | Mowilith® LDM 7411 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7411 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hard...view more Mowilith® LDM 7411 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7411 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hardness, short drying time and early block resistance, particularly important for use on doors and window frames. Paint films show a good resistance to ageing and are notable for their good wet adhesion on old oil and alkyd resin paints under the influence of water and/or simultaneous mechanical stress. view less | |
| Mowilith® LDM 7412 | Celanese Emulsion Polymers | Mowilith® LDM 7412 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7412 is especially suitable for the production of emulsion-based gloss paints with low pvc, good anti-blocking properties and ...view more Mowilith® LDM 7412 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7412 is especially suitable for the production of emulsion-based gloss paints with low pvc, good anti-blocking properties and low odour. Paint films show a good resistance to ageing and are notable for their good wet adhesion on old oil and alkyd resin paints under the effect of water and simultaneous mechanical stress. view less | |
| Mowilith® LDM 7416 | Celanese Emulsion Polymers | Mowilith® LDM 7416 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7416 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hard...view more Mowilith® LDM 7416 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7416 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hardness, short drying time and early block resistance, particularly important for use on doors and window frames. High hail stone resistance is a further feature of this emulsion. Paint films show a good resistance to ageing and are notable for their good wet adhesion on old oil and alkyd resin paints under the influence of water and/or simultaneous mechanical stress. view less | |
| Mowilith® LDM 7431 | Celanese Emulsion Polymers | Mowilith® LDM 7431 is a copolymer emulsion of styrene, methacrylic acid esters and acrylic acid esters. Mowilith® LDM 7431 is developed to be used in anti-corrosion paints but could also be used in other solvent-free water based paints and lacquers with h...view more Mowilith® LDM 7431 is a copolymer emulsion of styrene, methacrylic acid esters and acrylic acid esters. Mowilith® LDM 7431 is developed to be used in anti-corrosion paints but could also be used in other solvent-free water based paints and lacquers with high demand of low blocking, low liquid water uptake, good adhesion too many substrates and early water resistance. view less | |
| Mowilith® LDM 7451 | Celanese Emulsion Polymers | Mowilith® LDM 7451 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7451 is a universal acrylic binder for all kinds of solvent containing wood stains and pigmented gloss paints with...view more Mowilith® LDM 7451 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7451 is a universal acrylic binder for all kinds of solvent containing wood stains and pigmented gloss paints with good scratch and block resistance. view less | |
| Mowilith® LDM 7461 | Celanese Emulsion Polymers | Mowilith® LDM 7461 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. It is a useful binder to formulate water based clear and pigmented lacquers intended for industrial application and with good scratch and b...view more Mowilith® LDM 7461 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. It is a useful binder to formulate water based clear and pigmented lacquers intended for industrial application and with good scratch and blocking properties. Mowilith® LDM 7461 is a fine dispersed emulsion with low viscosity and good mechanical stability. At temperatures higher than approx. 25 °C it forms a clear and hard film with a very good resistance towards grease, water and alkaline solutions. view less | |
| Mowilith® LDM 7510 | Celanese Emulsion Polymers | Mowilith® LDM 7510 is an aqueous copolymer dispersion based on (meth)acrylic acid esters. It is a raw material for the paints and coatings industry where it is used to formulate glossy trim paints - interior and exterior use. Mowilith® LDM 7510 is a new g...view more Mowilith® LDM 7510 is an aqueous copolymer dispersion based on (meth)acrylic acid esters. It is a raw material for the paints and coatings industry where it is used to formulate glossy trim paints - interior and exterior use. Mowilith® LDM 7510 is a new generation of acrylic emulsions for glossy trim paints formulated without coalescing agents. It offers a good balance of block resistance and elasticity. view less | |
| Mowilith® LDM 7667 | Celanese Emulsion Polymers | Mowilith® LDM 7667 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Due to its very low particle size Mowilith® LDM 7667 is suitable for the formulation of aqueous primers with good penetration properties on...view more Mowilith® LDM 7667 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Due to its very low particle size Mowilith® LDM 7667 is suitable for the formulation of aqueous primers with good penetration properties on porous substrates like gypsum, plasters and concrete. The dispersion may also be used as a binder for impregnating wood stains. view less | |
| Mowilith® LDM 7671 | Celanese Emulsion Polymers | Mowilith® LDM 7671 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Mowilith® LDM 7671 is a relatively soft aqueous polymer dispersion which forms a film with high flexibility and low water uptake. Because of...view more Mowilith® LDM 7671 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Mowilith® LDM 7671 is a relatively soft aqueous polymer dispersion which forms a film with high flexibility and low water uptake. Because of these properties Mowilith® LDM 7671 is particularly suited for the formulation of elastomeric wall coatings and crack-bridging systems. view less | |
| Mowilith® LDM 7709 | Celanese Emulsion Polymers | Mowilith LDM 7709 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith LDM 7709 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such masonry, deep shade paints, plasters and...view more Mowilith LDM 7709 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith LDM 7709 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such masonry, deep shade paints, plasters and textured coatings. The product can be used also in combination with silicate binders after testing. The emulsion offers excellent outdoor durability and optimised dirt pick up which makes it the binder of choice for coalescent-free façade paint formulations. view less | |
| Mowilith® LDM 7714 | Celanese Emulsion Polymers | Mowilith® LDM 7714 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7714 is especially designed as a binder for high-quality exterior coatings with excellent adhesion properties, for example on ...view more Mowilith® LDM 7714 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7714 is especially designed as a binder for high-quality exterior coatings with excellent adhesion properties, for example on old alkyd coatings or zinc plates. The special adhesion and cross-linking system of Mowilith® LDM 7714 give rise to outstanding wet adhesion in addition to low dirt-pickup. view less | |
| Mowilith® LDM 7717 | Celanese Emulsion Polymers | Mowilith® LDM 7717 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7717 is especially designed as a binder for resin-bound plasters, textured coatings and high-quality exterior paints. Mowilith...view more Mowilith® LDM 7717 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7717 is especially designed as a binder for resin-bound plasters, textured coatings and high-quality exterior paints. Mowilith® LDM 7717 combines low water uptake with good hardness, which translates into excellent weathering behaviour in paints, plasters and external insulation and finishing systems. view less | |
| Mowilith® LDM 7719 | Celanese Emulsion Polymers | Mowilith® LDM 7719 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7719 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such as wood coatings, deep shade paints, a...view more Mowilith® LDM 7719 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7719 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such as wood coatings, deep shade paints, and masonry paints with medium until high pigment volume concentrations. The emulsion offers excellent outdoor durability, low water uptake and good wet adhesion, which makes it the binder of choice for coalescent-free façade paint formulations. view less | |
| Mowilith® LDM 7722 | Celanese Emulsion Polymers | Mowilith® LDM 7722 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7722 is especially suitable as binder for masonry coatings and mid sheen paints (latex paints) with lower pvc. | |
| Mowilith® LDM 7724 | Celanese Emulsion Polymers | Mowilith® LDM 7724 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7724 is especially designed as a binder for gloss paints and low pigmented wood coatings of all kinds. | |
| Mowilith® LDM 7729 | Celanese Emulsion Polymers | Mowilith® LDM 7729 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7729 is a pure acrylic emulsion with low MFFT designed for low VOC paints such as, low emission interior paints, low emission ...view more Mowilith® LDM 7729 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7729 is a pure acrylic emulsion with low MFFT designed for low VOC paints such as, low emission interior paints, low emission deep shade paints, and low emission masonry paints, with medium until high pigment volume concentrations. The emulsion offers excellent outdoor durability, low water uptake and good wet adhesion, which makes it the binder of choice for coalescent-free façade paint formulations. view less | |
| Mowilith® LDM 7764 | Celanese Emulsion Polymers | Mowilith® LDM 7764 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7764 is a useful binder to formulate water-based exterior paints for alkaline substrates such as concrete and fibre cement. Th...view more Mowilith® LDM 7764 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7764 is a useful binder to formulate water-based exterior paints for alkaline substrates such as concrete and fibre cement. The dispersion can be used with or without pigmentation. Properly formulated paints based on Mowilith® LDM 7764 will exhibit excellent resistance towards water and alkaline solutions. Such paints will also show a good weather resistance, an excellent blocking resistance and a good resistance towards efflorescence. view less | |
| Mowilith® LDM 7991 | Celanese Emulsion Polymers | Mowilith® LDM 7991 is a non-plasticized aqueous copolymer dispersion based acrylic and methacrylic acid esters. Mowilith® LDM 7991 is a very hard polyacrylic dispersion and is especially suitable for the manufacture of coatings for plastics, wood (interio...view more Mowilith® LDM 7991 is a non-plasticized aqueous copolymer dispersion based acrylic and methacrylic acid esters. Mowilith® LDM 7991 is a very hard polyacrylic dispersion and is especially suitable for the manufacture of coatings for plastics, wood (interior use) and metal (as primer). The dispersion is also suitable as combination partner to be mixed with other softer polymer dispersion to improve their hardness and block resistance, for example. However, proper compatibility tests have to be performed at any rate. The storage stability and tendency for discoloration of these mixtures must be observed carefully. view less | |
| Mowilith Nano® 9420 | Celanese Emulsion Polymers | Mowilith Nano® 9420 is an aqueous organosilicate hybrid dispersion which consists of a silicium dioxide component (40% relative to the solids content) and an organic copolymer based on acrylic and methacrylic acid esters. Mowilith Nano® 9420 was developed...view more Mowilith Nano® 9420 is an aqueous organosilicate hybrid dispersion which consists of a silicium dioxide component (40% relative to the solids content) and an organic copolymer based on acrylic and methacrylic acid esters. Mowilith Nano® 9420 was developed as binder for all kinds of coatings, however especially for the formulation of paints and emulsion-based plasters. view less | |
| PT 312 | BIP (Oldbury) Ltd | PT 312 is a methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening of all fibre types. It has a low free formaldehyde version PT 338. | |
| PT 322 | BIP (Oldbury) Ltd | PT 322 is a modified urea resin. Primarily used in the production of economic fabric stiffeners. | |
| PT 336 | BIP (Oldbury) Ltd | PT 336 Methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening and binding of all fibre types. This product exhibits medium to high reactivity. | |
| PT 338 | BIP (Oldbury) Ltd | PT 338 is a methylated melamine resin. Primarily used as a resin for stiffening of all fabric types. | |
| PT 350 | BIP (Oldbury) Ltd | PT 350 is a modified reactant resin. Primarily used as a cross Linking Resins for Acrylic Pastes and coatings and use as fabric stiffeners or binders. It combines easy care with additive fixation. | |
| PT 368 | BIP (Oldbury) Ltd | PT 368 is a modified methylated melamine resin. It can be used to create a cost effective stiffening agent and binder. | |
| PT 370 | BIP (Oldbury) Ltd | PT 370 is a fully methylated HMMM resin. It is primarily used as a cross linking agent for synthetic, natural rubber latex and PUD's, chlorine resist finish and bonding of non woven material. | |
| PT 3745 | BIP (Oldbury) Ltd | PT 3745 is a fully methylated HMMM resin. Primarily used as a cross linking agent for synthetic, natural rubber latex and PUD's, chlorine resist finish and bonding of non woven material. | |
| PT 726 | BIP (Oldbury) Ltd | PT 726 is a modified polymer of ethylene urea. It is a non-ionic, clear to pale yellow, formaldehyde free liquid. Primarily used for crease resistant finishes on cellulose fiber fabrics when formaldehyde free product and requires no special catalyst. | |
| PT 727 | BIP (Oldbury) Ltd | PT 727 is a modified urea formaldehyde polymer. It is a clear, straw coloured cationic liquid. Primarily used for anchoring thermoplastic coatings to regenerated cellulose film. | |
| PT 729 | BIP (Oldbury) Ltd | PT 729 is an oligomer of dimethylol cyclic ethylene urea. It is a non-ionic reactant resin. Primarily used as a soft crease resistant and mechanical finishes for cellulosic fibres, woven and knitted goods, can also be used for white goods where chlorine r...view more PT 729 is an oligomer of dimethylol cyclic ethylene urea. It is a non-ionic reactant resin. Primarily used as a soft crease resistant and mechanical finishes for cellulosic fibres, woven and knitted goods, can also be used for white goods where chlorine retention is of no importance. view less | |
| PT 931 | BIP (Oldbury) Ltd | PT 931 is a dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde clear solution that is primarily used as a crease resistant and permanent press finish for fabrics containing cellulosic/synthetic fibre blends. Th...view more PT 931 is a dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde clear solution that is primarily used as a crease resistant and permanent press finish for fabrics containing cellulosic/synthetic fibre blends. This product gives improved chlorine resistance and very low residual formaldehyde. view less | |
| PT 933 | BIP (Oldbury) Ltd | PT 933 is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. Primarily used as a suitable for crease resistant finishing where necessary to achieve Oeko-Tex 100 Class 1 and...view more PT 933 is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. Primarily used as a suitable for crease resistant finishing where necessary to achieve Oeko-Tex 100 Class 1 and Japanese Law 112 for baby wear and good chlorine resistance. view less | |
| PT 939 C | BIP (Oldbury) Ltd | PT 939 C is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. It is very reactive and primarily used with BCP for excellent DP ratings on cellulose fabrics. | |
| S 144 | BIP (Oldbury) Ltd | S 144 is a type of cationic softener. it has a suitable use as a softener for all cellulosic and polyester cellulose blends. | |
| Surkofilm® 64S | BIP (Oldbury) Ltd | Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It imparts softness and flexibility for reverse printing on PE and OPP. view less | |
| Surkofilm® 1137 | BIP (Oldbury) Ltd | Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...view more Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Primarily used in the production of lamination inks, mono-component or in combination with nitrocellulose as well as vinyl resins. view less | |
| Surkofilm® 62H | BIP (Oldbury) Ltd | Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is a harder version Surkofilm® 64S. view less | |
| Surkofilm® 653H | BIP (Oldbury) Ltd | Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...view more Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. it can be used in flexographic or gravure lamination and surface printing. as well as in combination with nitrocellulose or vinyl resin for the production of retortable inks. view less | |
| Surkofilm® 71H | BIP (Oldbury) Ltd | Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is used for the production of lamination inks for nylon and other films. view less | |
| Surkofilm® 72S | BIP (Oldbury) Ltd | Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is generally used for reverse printing & lamination inks. view less | |
| Surkofilm® 90H | BIP (Oldbury) Ltd | Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where...view more Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It has low viscosity and a hard PU component when in combination with vinyl resins. view less | |
| Surkofilm® MR 132 | BIP (Oldbury) Ltd | Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wh...view more Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Surkofilm® MR 132 is a mixed aromatic/aliphatic polyurethane for reverse printing onto PE & OPP. view less | |
| Surkopak® 2135 | BIP (Oldbury) Ltd | Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is soft, very flexible and has excellent solvent release properties. view less | |
| Surkopak® 5241 | BIP (Oldbury) Ltd | Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a solvent free version SP 5244. view less | |
| Surkopak® 5244 | BIP (Oldbury) Ltd | Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. General purpose, flexo-graphic and gravure inks. view less | |
| Surkopak® 5245 | BIP (Oldbury) Ltd | Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has improved alcohol tolerance compared to SP 5244. view less | |
| Surkopak® 5246 | BIP (Oldbury) Ltd | Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has lower solids and viscosity compared to SP 5245. view less | |
| Surkopak® 5255 | BIP (Oldbury) Ltd | Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5244. view less | |
| Surkopak® 5311 | BIP (Oldbury) Ltd | Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5323. view less | |
| Surkopak® 5323 | BIP (Oldbury) Ltd | Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has increased hardness when compared to SP 5255 and can be used in surface, reverse & lamination processes. view less | |
| Surkopak® X | BIP (Oldbury) Ltd | Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both r...view more Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It can be used on hard grade surfaces and in reverse and lamination processes. view less | |
| Lab Formulation for Exterior and Interior Gloss Paints [Lacquers] (Formulation #L 6003 FAI-e) | Celanese Emulsion Polymers | This formulation is for exterior and interior gloss paints (Lacquers) that contain Mowilith LDM 7451 and Mowilith LDM 7002. | |
| Lab Formulation for Exterior and Interior Plaster, White (Formulation #L 4039 PAI-e) | Celanese Emulsion Polymers | This formulation is for exterior and interior white plaster that contains Omyacarb 40 GU, Omyacarb 130 GU, Carolith 0,1-0,5 and Carolith 1,5-2,0. | |
| Lab Formulation for Façade Paint (Formulation #L 3049 FAI-e) | Celanese Emulsion Polymers | This formulation is for facade paint that contains Mowilith LDM 7717. | |
| Lab Formulation for Interior Emulsion Paint, White (Formulation #L 2026 FI-e) | Celanese Emulsion Polymers | This formulation is for white interior emulsion paint that contains Mowilith LDM 1871. | |
| Lab Formulation for Interior Low Emission Paint (Formulation #L 2025 FI-e) | Celanese Emulsion Polymers | This formulation is for interior low emission paint that contains Mowilith LDM 1871. | |
| Lab Formulation for Low Emission Interior Paint (Formulation #L 2034 FI-e) | Celanese Emulsion Polymers | An interior paint with Mowilith® LDM 7412 that is easy to clean and has a low odor. This guide formulation does not contain preservatives. In order to guarantee the microbial stability of the formulation the addition of preservatives is necessary. | |
| Lab Formulation for Semi Gloss Interior Paint, Low VOC (Formulaton #L 6048 FAI-e) | Celanese Emulsion Polymers | This formulation is for semi gloss interior paint with low VOC that contains Mowilith LDM 1852. |
