| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...view more 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. view less | |
| Blown Castor Oil (BCO) | Castor International BV | Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...view more Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. view less | |
| Castor Oil | Castor International BV | Castor Oil, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor and is pale-yellowish or almost colorless. There are numerous applications in various industrial s...view more Castor Oil, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor and is pale-yellowish or almost colorless. There are numerous applications in various industrial segments, because of its unique molecule structure, such as lubricants in hydraulic fluids and 2 stroke engines, polyurethane in PU floor coatings, PU adhesives/sealants and PU foams, adhesives in hot-melts, and more. view less | |
| Castor Oil FSG Low Acid Value | Castor International BV | Castor Oil FSG Low Acid Value, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/...view more Castor Oil FSG Low Acid Value, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/g max. There are numerous applications in various industrial segments, because of its unique molecule structure, such as polyurethane in PU floor coatings, PU adhesives/sealants and PU foams. view less | |
| Castor Oil FSG Low Water Content | Castor International BV | Castor Oil FSG Low Water Content, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg K...view more Castor Oil FSG Low Water Content, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/g max. There are numerous applications in various industrial segments, because of its unique molecule structure, such as polyurethane in PU floor coatings, PU adhesives/sealants and PU foams. view less | |
| Castor Polyol (Type 114) | Castor International BV | Castor Polyol (Type 114) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1145. It is for use in vari...view more Castor Polyol (Type 114) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1145. It is for use in various fillers, like silicates, quartz, calcium carbonate and barites, additives and pigments as a leveling aids and defoamers and it may be added to such formulations for preparing coatings, adhesives, floor coatings, electrical casting applications, and sealants. view less | |
| Castor Polyol (Type 115) | Castor International BV | Castor Polyol (Type 115) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of 1.000 ± 0.00 (25°C) and is developed as an alternative for Desmophen-1150. It is cured with MDI and th...view more Castor Polyol (Type 115) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of 1.000 ± 0.00 (25°C) and is developed as an alternative for Desmophen-1150. It is cured with MDI and the nature and addition of additives and fillers may vary depending on the particular formulation for making: adhesives, coatings, floorings, and electrical casting applications. view less | |
| Castor Polyol (Type 116) | Castor International BV | Castor Polyol (Type 116) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1155. It can be cured with ...view more Castor Polyol (Type 116) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1155. It can be cured with MDI and its variants or by aliphatic isocyanates like HDI, in combination with castor polyol types 114 and 115. Castor Polyol (Type 116) has many applications, for instance: in various fillers, like silicates, quartz, calcium carbonate, and barites: in additives and pigments, like leveling aids and defoamers: and may be added to such formulations for preparing coatings, adhesives, floor coatings, electrical casting applications, and sealants. view less | |
| Castor Thickener (Blend) | Castor International BV | Castor Thickener (Blend) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Blend) has advantages in improved storage ...view more Castor Thickener (Blend) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Blend) has advantages in improved storage stability and leveling, no hard settling of pigments, and provides sag control. Other applications are in adhesives, sealants, alkyd resins, and 2K PU systems. Castor Thickener (Blend) has a melting point of 136°C to 140°C, a saponification value of 130 to 138 mg KOH/g, and an acid value of 6 mg KOH/g max. view less | |
| Castor Thickener (Pure) | Castor International BV | Castor Thickener (Pure) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Pure) has advantages in improved storage st...view more Castor Thickener (Pure) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Pure) has advantages in improved storage stability and leveling, no hard settling of pigments, and provides sag control. Other applications are in adhesives, sealants, alkyd resins, and 2K PU systems. Castor Thickener (Pure) has a melting point of 82°C to 88°C, a saponification value of 177 to 182 mg KOH/g, and an acid value of 4 mg KOH/g max. view less | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...view more Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...view more Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...view more Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Drying additive 3A (Paste 50) | Castor International BV | Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane form...view more Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 3A (Paste 60) | Castor International BV | Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane form...view more Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 3A (Powder) | Castor International BV | Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethan...view more Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Paste 50) | Castor International BV | Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyure...view more Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Paste 60) | Castor International BV | Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyure...view more Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Powder) | Castor International BV | Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyu...view more Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...view more Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. view less | |
| MDI CI 15/10000 | Castor International BV | MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solven...view more MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 15/10000 has an approximate equivalent weight of 280 g/mol with a viscosity of 10000 mPa.s at 23°C. view less | |
| MDI CI 16/1800 | Castor International BV | MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 16/1800 has an approximate equivalent weight of 262 g/mol with a viscosity of 1800 mPa.s at 23°C. view less | |
| MDI CI 22/1500 | Castor International BV | MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 22/1500 has an approximate equivalent weight of 191 g/mol with a viscosity of 1500 mPa.s at 23°C. view less | |
| MDI CI 25/1200 | Castor International BV | MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 25/1200 has an approximate equivalent weight of 168 g/mol with a viscosity of 1200 mPa.s at 23°C. view less | |
| MDI CI 32/120 | Castor International BV | MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...view more MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/120 has an approximate equivalent weight of 126 g/mol with a viscosity of 120 mPa.s at 23°C. view less | |
| MDI CI 32/200 | Castor International BV | MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...view more MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/200 has an approximate equivalent weight of 125 g/mol with a viscosity of 200 mPa.s at 23°C. view less | |
| MDI CI 32/40 | Castor International BV | MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-f...view more MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/40 has an approximate equivalent weight of 129 g/mol with a viscosity of 40 mPa.s at 23°C. view less | |
| Mowilith® DM 2 H | Celanese Emulsion Polymers | Mowilith® DM 2 H is an aqueous copolymer dispersion based on vinyl acetate and maleic acid dibutyl ester. It has both a good pigment compatibility and good pigment binding power. The emulsion is a suitable binder for the formulation of emulsion paints wit...view more Mowilith® DM 2 H is an aqueous copolymer dispersion based on vinyl acetate and maleic acid dibutyl ester. It has both a good pigment compatibility and good pigment binding power. The emulsion is a suitable binder for the formulation of emulsion paints with excellent weather resistance for wood and other substrates (weather protection paints). The paint films do not become brittle under the influence of humidity and show good water vapour permeability. view less | |
| Mowilith® LDM 1828 | Celanese Emulsion Polymers | Mowilith® LDM 1828 is an aqueous copolymer dispersion based on vinyl acetate, vinyl esters and ethylene. It is a raw material for industrial use, and is stabilized in cellulose derivatives and surfactants. | |
| Mowilith® LDM 1840 | Celanese Emulsion Polymers | Mowilith® LDM 1840 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Due to its good flexibility, water resistance, compatibility with cement and pigment binding power, Mowilith® LDM 1840 is a suitable binder for elastom...view more Mowilith® LDM 1840 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Due to its good flexibility, water resistance, compatibility with cement and pigment binding power, Mowilith® LDM 1840 is a suitable binder for elastomeric roof coatings. view less | |
| Mowilith® LDM 1852 | Celanese Emulsion Polymers | Mowilith® LDM 1852 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and ethylene. This product is especially suited for the formulation of interior medium pvc latex paints of low odour without any solvents and/or plasticizers. | |
| Mowilith® LDM 1865 | Celanese Emulsion Polymers | Mowilith® LDM 1865 is an aqueous polymer dispersion based on vinyl acetate, ethylene and methacrylic acid esters, free of solvents and plasticizers. Mowilith® LDM 1865 is especially suitable for the formulation of exterior coating systems of low odour and...view more Mowilith® LDM 1865 is an aqueous polymer dispersion based on vinyl acetate, ethylene and methacrylic acid esters, free of solvents and plasticizers. Mowilith® LDM 1865 is especially suitable for the formulation of exterior coating systems of low odour and without any solvents and/or plasticizers. Mowilith® LDM 1865 can also be used to formulate high quality and solvent-free interior satin paints with good block resistance. view less | |
| Mowilith® LDM 1871 | Celanese Emulsion Polymers | Mowilith® LDM 1871 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1871 is especially suited for the formulation of interior coating systems of low odour and without any solvents and/or plasticizers. Th...view more Mowilith® LDM 1871 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1871 is especially suited for the formulation of interior coating systems of low odour and without any solvents and/or plasticizers. The fields of application cover high pvc paints with outstanding scrub resistance as well as latex paints with good anti-blocking properties. view less | |
| Mowilith® LDM 1880 | Celanese Emulsion Polymers | Mowilith® LDM 1880 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1880 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and with...view more Mowilith® LDM 1880 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1880 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and without any solvents and/or plasticizers. The fields of application cover high pvc paints with outstanding scrub resistance as well as latex paints with good anti-blocking properties. view less | |
| Mowilith® LDM 1881 | Celanese Emulsion Polymers | Mowilith® LDM 1881 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1881 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and witho...view more Mowilith® LDM 1881 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1881 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and without any solvents and/or plasticizers. The fields of application cover high pvc paints with outstanding scrub resistance as well as latex paints with good anti-blocking properties. view less | |
| Mowilith® LDM 2110 | Celanese Emulsion Polymers | Mowilith® LDM 2110 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2110 has a broad application spectrum such as interior and exterior paints, deep shade paints as well as resin-boun...view more Mowilith® LDM 2110 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2110 has a broad application spectrum such as interior and exterior paints, deep shade paints as well as resin-bound plasters and textured coatings. A very special possible application area is the formulation of lime finishes. view less | |
| Mowilith® LDM 2301 | Celanese Emulsion Polymers | Mowilith® LDM 2301 is an aqueous copolymer dispersion based on vinyl acetate and vinyl neodecanoate. It is a raw material for industrial use, and is stabilized in cellulose derivatives and surfactants. | |
| Mowilith® LDM 2383 | Celanese Emulsion Polymers | Mowilith® LDM 2383 is non-plasticized aqueous polymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2383 is also suited for the formulation of semi gloss interior and exterior paints with a higher amount of binder. In t...view more Mowilith® LDM 2383 is non-plasticized aqueous polymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2383 is also suited for the formulation of semi gloss interior and exterior paints with a higher amount of binder. In these applications, it boasts excellent wet scrub resistance combined with high gloss levels. For the painter, it offers good rheological behaviour and ease of application. view less | |
| Mowilith® LDM 2416 | Celanese Emulsion Polymers | Mowilith® LDM 2416 is a non-plasticized and ammonia-free aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2416 is especially suited for the formulation of interior and exterior paints, matt as well as sem...view more Mowilith® LDM 2416 is a non-plasticized and ammonia-free aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2416 is especially suited for the formulation of interior and exterior paints, matt as well as semi-gloss and thixotropic paints. The semigloss paints made with this dispersion have a good gloss level and a good rheological behaviour. view less | |
| Mowilith® LDM 2454 | Celanese Emulsion Polymers | Mowilith® LDM 2454 is an aqueous copolymer dispersion based on vinyl acetate, vinyl neodecanoate and (meth)acrylic acid esters. It is a raw material for the paints and coatings industry. It is used in the formulation of conventional matt interior paints, ...view more Mowilith® LDM 2454 is an aqueous copolymer dispersion based on vinyl acetate, vinyl neodecanoate and (meth)acrylic acid esters. It is a raw material for the paints and coatings industry. It is used in the formulation of conventional matt interior paints, conventional latex paints, masonry paints, deep shade paints, and more. Mowilith® LDM 2454 is a multi-purpose binder with several possible application areas, especially textured coatings, and it offers exceptionally high pigment binding power. view less | |
| Mowilith® LDM 6119 | Celanese Emulsion Polymers | Mowilith® LDM 6119 is a non-plasticized aqueous polymer dispersion based on styrene and an acrylic acid ester. Mowilith® LDM 6119 is a universal binder for all kinds of paints and resin-bound plasters with medium until high pigment volume concentrations. ...view more Mowilith® LDM 6119 is a non-plasticized aqueous polymer dispersion based on styrene and an acrylic acid ester. Mowilith® LDM 6119 is a universal binder for all kinds of paints and resin-bound plasters with medium until high pigment volume concentrations. The dispersion is especially suited for those applications which have high demands regarding water and alkali resistance. view less | |
| Mowilith® LDM 6159 | Celanese Emulsion Polymers | Mowilith® LDM 6159 is a non-plasticized aqueous copolymer dispersion based on acrylic acid esters and styrene. It is designed especially for the manufacture of stain-blocking primers and paints for use on wood, gypsum board or oriented strand board (OSP)....view more Mowilith® LDM 6159 is a non-plasticized aqueous copolymer dispersion based on acrylic acid esters and styrene. It is designed especially for the manufacture of stain-blocking primers and paints for use on wood, gypsum board or oriented strand board (OSP). Stain-blocking primers formulated with Mowilith® LDM 6159 feature good barrier properties against difficult stains such as tannin, grease or smoke in order to protect the top coat from discoloration. view less | |
| Mowilith® LDM 6482 | Celanese Emulsion Polymers | Mowilith® LDM 6482 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. It is also suitable for the formulation of crack-bridging and water-proof coating compounds and flexible roof coatings. | |
| Mowilith® LDM 6636 | Celanese Emulsion Polymers | Mowilith® LDM 6636 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. Mowilith® LDM 6636 was especially developed as binder for the formulation of high performance ceramic tile adhesives with excellent water resista...view more Mowilith® LDM 6636 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. Mowilith® LDM 6636 was especially developed as binder for the formulation of high performance ceramic tile adhesives with excellent water resistance. Such tile adhesives are important for bath rooms or kitchens, or in general such places with a high exposure to water. Usual fillers like silica or calcium carbonate may be used for the production of ceramic tile adhesives. Suitable wetting and dispersing agents are sodium hexametaphosphate or polyphosphates. view less | |
| Mowilith® LDM 6911 | Celanese Emulsion Polymers | Mowilith® LDM 6911 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. It is a universal binder for all kinds of solvent containing matt and semi matt paints for interior and exterior use. The dispersion is especially...view more Mowilith® LDM 6911 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. It is a universal binder for all kinds of solvent containing matt and semi matt paints for interior and exterior use. The dispersion is especially suited for those applications with high demands regarding water and alkali resistance. view less | |
| Mowilith® LDM 7281 | Celanese Emulsion Polymers | Mowilith® LDM 7281 is a non-plasticized aqueous polymer dispersion based on acrylic and methacrylic acid esters. The usual titanium dioxide and coloured pigments as well as fillers and texturing grains may be used for the formulation of paints and resin-b...view more Mowilith® LDM 7281 is a non-plasticized aqueous polymer dispersion based on acrylic and methacrylic acid esters. The usual titanium dioxide and coloured pigments as well as fillers and texturing grains may be used for the formulation of paints and resin-bound plasters. view less | |
| Mowilith® LDM 7411 | Celanese Emulsion Polymers | Mowilith® LDM 7411 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7411 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hard...view more Mowilith® LDM 7411 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7411 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hardness, short drying time and early block resistance, particularly important for use on doors and window frames. Paint films show a good resistance to ageing and are notable for their good wet adhesion on old oil and alkyd resin paints under the influence of water and/or simultaneous mechanical stress. view less | |
| Mowilith® LDM 7412 | Celanese Emulsion Polymers | Mowilith® LDM 7412 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7412 is especially suitable for the production of emulsion-based gloss paints with low pvc, good anti-blocking properties and ...view more Mowilith® LDM 7412 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7412 is especially suitable for the production of emulsion-based gloss paints with low pvc, good anti-blocking properties and low odour. Paint films show a good resistance to ageing and are notable for their good wet adhesion on old oil and alkyd resin paints under the effect of water and simultaneous mechanical stress. view less | |
| Mowilith® LDM 7416 | Celanese Emulsion Polymers | Mowilith® LDM 7416 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7416 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hard...view more Mowilith® LDM 7416 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7416 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hardness, short drying time and early block resistance, particularly important for use on doors and window frames. High hail stone resistance is a further feature of this emulsion. Paint films show a good resistance to ageing and are notable for their good wet adhesion on old oil and alkyd resin paints under the influence of water and/or simultaneous mechanical stress. view less | |
| Mowilith® LDM 7431 | Celanese Emulsion Polymers | Mowilith® LDM 7431 is a copolymer emulsion of styrene, methacrylic acid esters and acrylic acid esters. Mowilith® LDM 7431 is developed to be used in anti-corrosion paints but could also be used in other solvent-free water based paints and lacquers with h...view more Mowilith® LDM 7431 is a copolymer emulsion of styrene, methacrylic acid esters and acrylic acid esters. Mowilith® LDM 7431 is developed to be used in anti-corrosion paints but could also be used in other solvent-free water based paints and lacquers with high demand of low blocking, low liquid water uptake, good adhesion too many substrates and early water resistance. view less | |
| Mowilith® LDM 7451 | Celanese Emulsion Polymers | Mowilith® LDM 7451 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7451 is a universal acrylic binder for all kinds of solvent containing wood stains and pigmented gloss paints with...view more Mowilith® LDM 7451 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7451 is a universal acrylic binder for all kinds of solvent containing wood stains and pigmented gloss paints with good scratch and block resistance. view less | |
| Mowilith® LDM 7461 | Celanese Emulsion Polymers | Mowilith® LDM 7461 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. It is a useful binder to formulate water based clear and pigmented lacquers intended for industrial application and with good scratch and b...view more Mowilith® LDM 7461 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. It is a useful binder to formulate water based clear and pigmented lacquers intended for industrial application and with good scratch and blocking properties. Mowilith® LDM 7461 is a fine dispersed emulsion with low viscosity and good mechanical stability. At temperatures higher than approx. 25 °C it forms a clear and hard film with a very good resistance towards grease, water and alkaline solutions. view less | |
| Mowilith® LDM 7510 | Celanese Emulsion Polymers | Mowilith® LDM 7510 is an aqueous copolymer dispersion based on (meth)acrylic acid esters. It is a raw material for the paints and coatings industry where it is used to formulate glossy trim paints - interior and exterior use. Mowilith® LDM 7510 is a new g...view more Mowilith® LDM 7510 is an aqueous copolymer dispersion based on (meth)acrylic acid esters. It is a raw material for the paints and coatings industry where it is used to formulate glossy trim paints - interior and exterior use. Mowilith® LDM 7510 is a new generation of acrylic emulsions for glossy trim paints formulated without coalescing agents. It offers a good balance of block resistance and elasticity. view less | |
| Mowilith® LDM 7667 | Celanese Emulsion Polymers | Mowilith® LDM 7667 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Due to its very low particle size Mowilith® LDM 7667 is suitable for the formulation of aqueous primers with good penetration properties on...view more Mowilith® LDM 7667 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Due to its very low particle size Mowilith® LDM 7667 is suitable for the formulation of aqueous primers with good penetration properties on porous substrates like gypsum, plasters and concrete. The dispersion may also be used as a binder for impregnating wood stains. view less | |
| Mowilith® LDM 7671 | Celanese Emulsion Polymers | Mowilith® LDM 7671 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Mowilith® LDM 7671 is a relatively soft aqueous polymer dispersion which forms a film with high flexibility and low water uptake. Because of...view more Mowilith® LDM 7671 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Mowilith® LDM 7671 is a relatively soft aqueous polymer dispersion which forms a film with high flexibility and low water uptake. Because of these properties Mowilith® LDM 7671 is particularly suited for the formulation of elastomeric wall coatings and crack-bridging systems. view less | |
| Mowilith® LDM 7709 | Celanese Emulsion Polymers | Mowilith LDM 7709 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith LDM 7709 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such masonry, deep shade paints, plasters and...view more Mowilith LDM 7709 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith LDM 7709 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such masonry, deep shade paints, plasters and textured coatings. The product can be used also in combination with silicate binders after testing. The emulsion offers excellent outdoor durability and optimised dirt pick up which makes it the binder of choice for coalescent-free façade paint formulations. view less | |
| Mowilith® LDM 7714 | Celanese Emulsion Polymers | Mowilith® LDM 7714 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7714 is especially designed as a binder for high-quality exterior coatings with excellent adhesion properties, for example on ...view more Mowilith® LDM 7714 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7714 is especially designed as a binder for high-quality exterior coatings with excellent adhesion properties, for example on old alkyd coatings or zinc plates. The special adhesion and cross-linking system of Mowilith® LDM 7714 give rise to outstanding wet adhesion in addition to low dirt-pickup. view less | |
| Mowilith® LDM 7717 | Celanese Emulsion Polymers | Mowilith® LDM 7717 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7717 is especially designed as a binder for resin-bound plasters, textured coatings and high-quality exterior paints. Mowilith...view more Mowilith® LDM 7717 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7717 is especially designed as a binder for resin-bound plasters, textured coatings and high-quality exterior paints. Mowilith® LDM 7717 combines low water uptake with good hardness, which translates into excellent weathering behaviour in paints, plasters and external insulation and finishing systems. view less | |
| Mowilith® LDM 7719 | Celanese Emulsion Polymers | Mowilith® LDM 7719 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7719 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such as wood coatings, deep shade paints, a...view more Mowilith® LDM 7719 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7719 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such as wood coatings, deep shade paints, and masonry paints with medium until high pigment volume concentrations. The emulsion offers excellent outdoor durability, low water uptake and good wet adhesion, which makes it the binder of choice for coalescent-free façade paint formulations. view less | |
| Mowilith® LDM 7722 | Celanese Emulsion Polymers | Mowilith® LDM 7722 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7722 is especially suitable as binder for masonry coatings and mid sheen paints (latex paints) with lower pvc. | |
| Mowilith® LDM 7724 | Celanese Emulsion Polymers | Mowilith® LDM 7724 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7724 is especially designed as a binder for gloss paints and low pigmented wood coatings of all kinds. | |
| Mowilith® LDM 7729 | Celanese Emulsion Polymers | Mowilith® LDM 7729 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7729 is a pure acrylic emulsion with low MFFT designed for low VOC paints such as, low emission interior paints, low emission ...view more Mowilith® LDM 7729 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7729 is a pure acrylic emulsion with low MFFT designed for low VOC paints such as, low emission interior paints, low emission deep shade paints, and low emission masonry paints, with medium until high pigment volume concentrations. The emulsion offers excellent outdoor durability, low water uptake and good wet adhesion, which makes it the binder of choice for coalescent-free façade paint formulations. view less | |
| Mowilith® LDM 7764 | Celanese Emulsion Polymers | Mowilith® LDM 7764 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7764 is a useful binder to formulate water-based exterior paints for alkaline substrates such as concrete and fibre cement. Th...view more Mowilith® LDM 7764 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7764 is a useful binder to formulate water-based exterior paints for alkaline substrates such as concrete and fibre cement. The dispersion can be used with or without pigmentation. Properly formulated paints based on Mowilith® LDM 7764 will exhibit excellent resistance towards water and alkaline solutions. Such paints will also show a good weather resistance, an excellent blocking resistance and a good resistance towards efflorescence. view less | |
| Mowilith® LDM 7991 | Celanese Emulsion Polymers | Mowilith® LDM 7991 is a non-plasticized aqueous copolymer dispersion based acrylic and methacrylic acid esters. Mowilith® LDM 7991 is a very hard polyacrylic dispersion and is especially suitable for the manufacture of coatings for plastics, wood (interio...view more Mowilith® LDM 7991 is a non-plasticized aqueous copolymer dispersion based acrylic and methacrylic acid esters. Mowilith® LDM 7991 is a very hard polyacrylic dispersion and is especially suitable for the manufacture of coatings for plastics, wood (interior use) and metal (as primer). The dispersion is also suitable as combination partner to be mixed with other softer polymer dispersion to improve their hardness and block resistance, for example. However, proper compatibility tests have to be performed at any rate. The storage stability and tendency for discoloration of these mixtures must be observed carefully. view less | |
| Mowilith Nano® 9420 | Celanese Emulsion Polymers | Mowilith Nano® 9420 is an aqueous organosilicate hybrid dispersion which consists of a silicium dioxide component (40% relative to the solids content) and an organic copolymer based on acrylic and methacrylic acid esters. Mowilith Nano® 9420 was developed...view more Mowilith Nano® 9420 is an aqueous organosilicate hybrid dispersion which consists of a silicium dioxide component (40% relative to the solids content) and an organic copolymer based on acrylic and methacrylic acid esters. Mowilith Nano® 9420 was developed as binder for all kinds of coatings, however especially for the formulation of paints and emulsion-based plasters. view less | |
| Partially Dehydrated Castor Oil | Castor International BV | Partially Dehydrated Castor Oil is created when part of the chemically combined water, has been removed. Heating the oil in the presence of catalysts such as clay's and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out....view more Partially Dehydrated Castor Oil is created when part of the chemically combined water, has been removed. Heating the oil in the presence of catalysts such as clay's and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Partially Dehydrated Castor Oil has a characteristic odor and is a yellow oily liquid. It has an acid value of 5 mg KOH/g max and can be used as a hydrophobic and plasticizer component in paints, coatings, and moldings. view less | |
| PEG-25-CO | Castor International BV | PEG-25-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-CO has a HLB ...view more PEG-25-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-CO has a HLB of approximately 11, a saponification value of 70 to 90, and an iodine value of 30 to 50. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-25-HCO | Castor International BV | PEG-25-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25...view more PEG-25-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-HCO has a HLB of approximately 11 and a saponification value of 70 to 90. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-40-CO | Castor International BV | PEG-40-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-CO has a HLB ...view more PEG-40-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-CO has a HLB of approximately 14, a saponification value of 45 to 69, and an iodine value of 20 to 35. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-40-HCO | Castor International BV | PEG-40-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40...view more PEG-40-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-HCO has a HLB of approximately 14 and a saponification value of 45 to 69. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-60-CO | Castor International BV | PEG-60-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-CO has a HLB ...view more PEG-60-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-CO has a HLB of approximately 16, a saponification value of 40 to 51, and an iodine value of 15 to 30. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-60-HCO | Castor International BV | PEG-60-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60...view more PEG-60-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-HCO has a HLB of approximately 16 and a saponification value of 40 to 51. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-7-CO | Castor International BV | PEG-7-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-CO has a HLB of...view more PEG-7-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-CO has a HLB of approximately 5, a saponification value of 125 to 140, and an iodine value of 55 to 75. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-7-HCO | Castor International BV | PEG-7-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-H...view more PEG-7-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-HCO has a HLB of approximately 5 and a saponification value of 125 to 140. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| Polyol CI 1200/10 | Castor International BV | Polyol CI 1200/10, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1300 mPa.s, and is harmless. Polyol CI 1200/10 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, ...view more Polyol CI 1200/10, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1300 mPa.s, and is harmless. Polyol CI 1200/10 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/1200 | Castor International BV | Polyol CI 1200/1200, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 500 mPa.s, and is harmless. Polyol CI 1200/1200 is used for adhesives, coatings, polyurethane cast moldings in combination with TD...view more Polyol CI 1200/1200, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 500 mPa.s, and is harmless. Polyol CI 1200/1200 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/240 | Castor International BV | Polyol CI 1200/240, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1050 mPa.s, and is harmless. Polyol CI 1200/240 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI...view more Polyol CI 1200/240, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1050 mPa.s, and is harmless. Polyol CI 1200/240 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/3600 | Castor International BV | Polyol CI 1200/3600, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 350 mPa.s, and is harmless. Polyol CI 1200/3600 is used for adhesives, coatings, polyurethane cast moldings in combination with TD...view more Polyol CI 1200/3600, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 350 mPa.s, and is harmless. Polyol CI 1200/3600 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/400 | Castor International BV | Polyol CI 1200/400, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 750 mPa.s, and is harmless. Polyol CI 1200/400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI,...view more Polyol CI 1200/400, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 750 mPa.s, and is harmless. Polyol CI 1200/400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 29/825 | Castor International BV | Polyol CI 29/825, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 825 mPa.s, and is harmless. Polyol CI 29/825 is used for adhesives, sealants, coatings, polyurethane moldings (...view more Polyol CI 29/825, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 825 mPa.s, and is harmless. Polyol CI 29/825 is used for adhesives, sealants, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 400/400 | Castor International BV | Polyol CI 400/400, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 400 mPa.s, and is harmless. Polyol CI 400/400 is used for adhesives, coatings, polyurethane moldings (CASE app...view more Polyol CI 400/400, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 400 mPa.s, and is harmless. Polyol CI 400/400 is used for adhesives, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 55/375 | Castor International BV | Polyol CI 55/375, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 375 mPa.s, and is harmless. Polyol CI 55/375 is used for adhesives, coatings, polyurethane moldings (CASE appli...view more Polyol CI 55/375, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 375 mPa.s, and is harmless. Polyol CI 55/375 is used for adhesives, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI T-400 | Castor International BV | Polyol CI T-400, a hydrolysis resistant, hydrophobic polyether triol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI T-400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, ...view more Polyol CI T-400, a hydrolysis resistant, hydrophobic polyether triol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI T-400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI X-630/1000 | Castor International BV | Polyol CI X-630/1000, a hydrolysis resistant, hydrophobic tetrafunctional polyether polyol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI X-630/1000 is used for adhesives, coatings, polyurethane cast moldings in combin...view more Polyol CI X-630/1000, a hydrolysis resistant, hydrophobic tetrafunctional polyether polyol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI X-630/1000 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Ricinoleic Acid (RA) | Castor International BV | Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal ...view more Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal working fluids, cutting oils, emulsifiers, and industrial lubricants; Surface coating: used as a pigment/dye dispersants in plastics, inks, coatings, etc.; Textiles: providing surface wetting and lubricity, and polarity. view less | |
| Sulphonated Castor Oil (SCO) | Castor International BV | Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling ag...view more Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling agent. Sulphonated Castor Oil (SCO) is used as a dispersion and pigment wetting application in the paint industry, and as leveling and dye dispersion in the inks industry, among others. view less | |
| Lab Formulation for Exterior and Interior Gloss Paints [Lacquers] (Formulation #L 6003 FAI-e) | Celanese Emulsion Polymers | This formulation is for exterior and interior gloss paints (Lacquers) that contain Mowilith LDM 7451 and Mowilith LDM 7002. | |
| Lab Formulation for Exterior and Interior Plaster, White (Formulation #L 4039 PAI-e) | Celanese Emulsion Polymers | This formulation is for exterior and interior white plaster that contains Omyacarb 40 GU, Omyacarb 130 GU, Carolith 0,1-0,5 and Carolith 1,5-2,0. | |
| Lab Formulation for Façade Paint (Formulation #L 3049 FAI-e) | Celanese Emulsion Polymers | This formulation is for facade paint that contains Mowilith LDM 7717. | |
| Lab Formulation for Interior Emulsion Paint, White (Formulation #L 2026 FI-e) | Celanese Emulsion Polymers | This formulation is for white interior emulsion paint that contains Mowilith LDM 1871. | |
| Lab Formulation for Interior Low Emission Paint (Formulation #L 2025 FI-e) | Celanese Emulsion Polymers | This formulation is for interior low emission paint that contains Mowilith LDM 1871. | |
| Lab Formulation for Low Emission Interior Paint (Formulation #L 2034 FI-e) | Celanese Emulsion Polymers | An interior paint with Mowilith® LDM 7412 that is easy to clean and has a low odor. This guide formulation does not contain preservatives. In order to guarantee the microbial stability of the formulation the addition of preservatives is necessary. | |
| Lab Formulation for Semi Gloss Interior Paint, Low VOC (Formulaton #L 6048 FAI-e) | Celanese Emulsion Polymers | This formulation is for semi gloss interior paint with low VOC that contains Mowilith LDM 1852. |
