| Additive ST 2 | Ichemco | Additive ST 2 is a polycondensed urethane solution in toluene/xylene. This product is most commonly used as an additive in Color Ink PP PAMC and Color Ink PP PAM+Add applications to improve protection of the printed area in case of ink transfer. | |
| Additive ST 2X | Ichemco | Additive ST 2X is a polycondensed urethane solution in xylene. This product has a total solids content of 11.5-12.5%. Additive ST 2X is most commonly used as an ink additive added before printing onto PP acrylic and solventborne PSA tapes. | |
| Additive ST2/14 | Ichemco | Additive ST2/14 is a polycondensed urethane solution in toluene/xylene. This product is most commonly used as an ink additive to increase printability in PP acrylic and solvent-based pressure sensitive adhesive tape applications. | |
| Additive ST2/14 ECO | Ichemco | Additive ST2/14 ECO is a polycondensed urethane solution in aliphatic solvents. This product is most commonly used as an ink additive to increase printability in PP acrylic and solvent-based pressure sensitive adhesive tape applications. | |
| Blendex 31 | Ichemco | Blendex 31 is a solvent-based, heat sealable adhesive. This product has a total solids content of 21-23% and a Brookfield viscosity at 25°C of 400-1000 cPs. Blendex 31 is most commonly used to bond rubber compounds to metal and polymeric substrates. | |
| Blendex 55 F | Ichemco | Blendex 55 F is a solvent-free, one-component moisture curing polyurethane adhesive. This product has a viscosity at 100°C of 750-1000 mPa.s. Blendex 55 F is most commonly used in fabric and film lamination applications. | |
| Blendex 70 A | Ichemco | Blendex 70 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate). solvent-based, heat sealable adhesive. This product has a total solids content of 64-66% and a Brookfield viscosity at 25°C of 670-870 cPs. Blendex 70 A is most common...view more Blendex 70 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate). solvent-based, heat sealable adhesive. This product has a total solids content of 64-66% and a Brookfield viscosity at 25°C of 670-870 cPs. Blendex 70 A is most commonly used as a solvent adhesive in coating system applications. view less | |
| Blendex 75 A | Ichemco | Blendex 75 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate) solvent-based, heat sealable adhesive. This product has a total solids content of 74-76% and a Brookfield viscosity at 25°C of 3300-5300 cPs. Blendex 75 A is most comm...view more Blendex 75 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate) solvent-based, heat sealable adhesive. This product has a total solids content of 74-76% and a Brookfield viscosity at 25°C of 3300-5300 cPs. Blendex 75 A is most commonly used as a solvent adhesive in coating system applications. view less | |
| Blendex 81 T | Ichemco | Blendex 81 T is a a two-component polyurethane adhesive in ethyl acetate, solvent-based, heat sealable adhesive. This product has a total solids content of 58-62% and a Brookfield viscosity at 25°C of 2300-4300 cPs. Blendex 81 T is most commonly used in f...view more Blendex 81 T is a a two-component polyurethane adhesive in ethyl acetate, solvent-based, heat sealable adhesive. This product has a total solids content of 58-62% and a Brookfield viscosity at 25°C of 2300-4300 cPs. Blendex 81 T is most commonly used in film and fabric lamination applications. view less | |
| Blendex B1 | Ichemco | Blendex B1 is a liquid blend of synthetic polymers and natural resins. This product has a viscosity at 3500-8000 cPa. Blendex B1 is most commonly used in solvent adhesive production applications. | |
| Blendex PVC 10 | Ichemco | Blendex PVC 10 is a heat-sealable, transparent, solvent-based printing lacquer. This product is most commonly used to improve scrubbing and water resistance in paper, PVC, and PET coating applications. | |
| Blendex S 24/20 | Ichemco | Blendex S 24/20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 5500-7500 cPs. Blendex S 24/20 is most commonl...view more Blendex S 24/20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 5500-7500 cPs. Blendex S 24/20 is most commonly used as a soft heat sealable adhesive in lamination applications. view less | |
| Blendex S 24/25 A | Ichemco | Blendex S 24/25 A is a solution of a thermoplastic polyurethane in acetone solvent-based, heat sealable adhesive. This product has a total solids content of 24-26% and a Brookfield viscosity at 25°C of 5000-7000 cPs. Blendex S 24/25 A is most commonly us...view more Blendex S 24/25 A is a solution of a thermoplastic polyurethane in acetone solvent-based, heat sealable adhesive. This product has a total solids content of 24-26% and a Brookfield viscosity at 25°C of 5000-7000 cPs. Blendex S 24/25 A is most commonly used as a soft heat sealable adhesive in lamination applications. view less | |
| Blendex S 24/25 MA | Ichemco | Blendex S 24/25 MA is a mat solution of a thermoplastic polyurethane in acetone, solvent-based, heat sealable adhesive. This product has a total solids content of 23-25%. Blendex S 24/25 MA is most commonly used as a soft heat sealable adhesive in lamina...view more Blendex S 24/25 MA is a mat solution of a thermoplastic polyurethane in acetone, solvent-based, heat sealable adhesive. This product has a total solids content of 23-25%. Blendex S 24/25 MA is most commonly used as a soft heat sealable adhesive in lamination applications. view less | |
| Blendex S 79 | Ichemco | Blendex S 79 is a solvent-based, heat sealable adhesive. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 4500-10,500 mPa.s. Blendex S 79 is most commonly used in fabric, paper, and plastic film direct coating applic...view more Blendex S 79 is a solvent-based, heat sealable adhesive. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 4500-10,500 mPa.s. Blendex S 79 is most commonly used in fabric, paper, and plastic film direct coating applications. view less | |
| Blendex S 79 T | Ichemco | Blendex S 79 T is a solvent-based, heat sealable adhesive. This product has a total solids content of 33-35% and a Brookfield viscosity at 25°C of 5000-15,000 mPa.s. Blendex S 79 T is most commonly used in fabric, paper, and plastic film direct and transf...view more Blendex S 79 T is a solvent-based, heat sealable adhesive. This product has a total solids content of 33-35% and a Brookfield viscosity at 25°C of 5000-15,000 mPa.s. Blendex S 79 T is most commonly used in fabric, paper, and plastic film direct and transfer coating applications. view less | |
| Blendex S12 20 | Ichemco | Blendex S12 20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 2000-6000 cPs. Blendex S12 20 is most commonly...view more Blendex S12 20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 2000-6000 cPs. Blendex S12 20 is most commonly used as a soft heat sealable adhesive in lamination applications. view less | |
| Blendex Seal 81 DH | Ichemco | Blendex Seal 81 DH is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 50-200 mPa.s. Blendex Seal 81 DH is most commonly used as a heat sealable elastic adhesive in leather, fo...view more Blendex Seal 81 DH is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 50-200 mPa.s. Blendex Seal 81 DH is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. view less | |
| Blendex Seal 81 DH (V1) | Ichemco | Blendex Seal 81 DH (V1) is a water dispersion of vinyl-acrylic copolimers and slightly tacky additives heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 12,000-17,000 mPa.s. Blendex Seal 81 D...view more Blendex Seal 81 DH (V1) is a water dispersion of vinyl-acrylic copolimers and slightly tacky additives heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 12,000-17,000 mPa.s. Blendex Seal 81 DH (V1) is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. view less | |
| Blendex Seal 81 DH (V2) | Ichemco | Blendex Seal 81 DH (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal 81 DH (V2) is most commonly used as a heat sealable elastic adhesi...view more Blendex Seal 81 DH (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal 81 DH (V2) is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. view less | |
| Blendex Seal 81 DH (V3) | Ichemco | Blendex Seal 81 DH (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal 81 DH (V3) is most commonly used as a heat sealable elastic adhesi...view more Blendex Seal 81 DH (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal 81 DH (V3) is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. view less | |
| Blendex Seal C6 | Ichemco | Blendex Seal C6 is a water-based, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 7500-10,500 mPa.s. Blendex Seal C6 is most commonly used as a soft heat sealable adhesive in leather, foam, f...view more Blendex Seal C6 is a water-based, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 7500-10,500 mPa.s. Blendex Seal C6 is most commonly used as a soft heat sealable adhesive in leather, foam, fabric, non-woven, and synthetic leather applications. view less | |
| Blendex Seal C6 (V3) | Ichemco | Blendex Seal C6 (V3) is a a water dispersion of polyvinylacetate/maleate copolymer, stabilised with synthetic and cellulosic stabilisers, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 27,00...view more Blendex Seal C6 (V3) is a a water dispersion of polyvinylacetate/maleate copolymer, stabilised with synthetic and cellulosic stabilisers, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal C6 (V3) is most commonly used as a soft heat sealable adhesive in leather, foam, fabric, non-woven, and synthetic leather applications. view less | |
| Blendex Seal DH 14 | Ichemco | Blendex Seal DH 14 is a polyester based, aliphatic acqueous polyurethane dispersion, water-based, heat sealable adhesive. This product has a total solids content of 29-31%. Blendex Seal DH 14 is most commonly used as a heat sealable adhesive in textile ap...view more Blendex Seal DH 14 is a polyester based, aliphatic acqueous polyurethane dispersion, water-based, heat sealable adhesive. This product has a total solids content of 29-31%. Blendex Seal DH 14 is most commonly used as a heat sealable adhesive in textile applications. view less | |
| Blendex Seal DH 70 | Ichemco | Blendex Seal DH 70 is a water-based, heat sealable adhesive based on modified acrylic polymers. This product has a total solids content of 23-25% and a Brookfield viscosity at 25°C of 8000-16,000 mPa.s. Blendex Seal DH 70 is most commonly used as a heat s...view more Blendex Seal DH 70 is a water-based, heat sealable adhesive based on modified acrylic polymers. This product has a total solids content of 23-25% and a Brookfield viscosity at 25°C of 8000-16,000 mPa.s. Blendex Seal DH 70 is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. view less | |
| Blendex Seal DH 76 | Ichemco | Blendex Seal DH 76 is a water-based, heat sealable adhesive, formulated with modified acrylic co-polymers.. This product has a total solids content of 37.5-39.5% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Blendex Seal DH 76 is most commonly us...view more Blendex Seal DH 76 is a water-based, heat sealable adhesive, formulated with modified acrylic co-polymers.. This product has a total solids content of 37.5-39.5% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Blendex Seal DH 76 is most commonly used as a heat sealable elastic adhesive in woven, non-woven, leather, foam, and synthetic leather applications. view less | |
| Blendex Seal DH 8 | Ichemco | Blendex Seal DH 8 is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 52-54%, and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Blendex Seal DH 8 is most commonly used as a heat s...view more Blendex Seal DH 8 is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 52-54%, and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Blendex Seal DH 8 is most commonly used as a heat sealable adhesive in fabric, leather, foam, non-woven, and synthetic leather applications. view less | |
| Blendex Seal DH 8 M | Ichemco | Blendex Seal DH 8 M is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 3000-6500 mPa.s. Blendex Seal DH 8 M is most commonly used as a heat ...view more Blendex Seal DH 8 M is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 3000-6500 mPa.s. Blendex Seal DH 8 M is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. view less | |
| Blendex Seal DH 8 M (V2) | Ichemco | Blendex Seal DH 8 M (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal DH 8 M (V2) is most commonly used as a heat sealable adhesive in f...view more Blendex Seal DH 8 M (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal DH 8 M (V2) is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. view less | |
| Blendex Seal DH 8 M (V3) | Ichemco | Blendex Seal DH 8 M (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal DH 8 M (V3) is most commonly used as a heat sealable adhesive in f...view more Blendex Seal DH 8 M (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal DH 8 M (V3) is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. view less | |
| Blendex WUM | Ichemco | Blendex WUM is a water-based, synthetic latex heat sealable adhesive. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Blendex WUM is most commonly used as a remoistable adhesive in paper and cardboa...view more Blendex WUM is a water-based, synthetic latex heat sealable adhesive. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Blendex WUM is most commonly used as a remoistable adhesive in paper and cardboard applications. view less | |
| Ithane 02 | Ichemco | Ithane 02 is an aromatic thermoplastic polyurethane in a dry granule form. This product has a Brookfield viscosity at 25°C of 460-680 cPs. Ithane 02 is most commonly used in shoe adhesive applications. | |
| Ithane 15 | Ichemco | Ithane 15 is an aromatic thermoplastic polyurethane in a dry granule form. This product has a Brookfield viscosity at 25°C of 100-200 cPs. Ithane 15 is most commonly used in flexible and rigid lacquer production applications. | |
| Ithane 15/25 | Ichemco | Ithane 15/25 is a solvent-based, heat sealable adhesive. This product has a total solids content of 24-26%. Ithane 15/25 is most commonly used as a soft heat sealable adhesive in lamination applications. | |
| Ithane 46 | Ichemco | Ithane 46 is a solvent-based, heat sealable adhesive. This product has a total solids content of 35-37% and a Brookfield viscosity at 25°C of 1000-2000 cPs. Ithane 46 is most commonly used in transparent and aluminum-containing structure lamination applic...view more Ithane 46 is a solvent-based, heat sealable adhesive. This product has a total solids content of 35-37% and a Brookfield viscosity at 25°C of 1000-2000 cPs. Ithane 46 is most commonly used in transparent and aluminum-containing structure lamination applications. view less | |
| Pro Lac WT | Ichemco | Pro Lac WT is a water-based thermoplastic acrylic copolymer protective coating. This product has a total solids content of 44-48% and a Brookfield viscosity at 25°C of 500-700 cPs. Pro Lac WT is most commonly used in temporary coating production applica...view more Pro Lac WT is a water-based thermoplastic acrylic copolymer protective coating. This product has a total solids content of 44-48% and a Brookfield viscosity at 25°C of 500-700 cPs. Pro Lac WT is most commonly used in temporary coating production applications. view less | |
| Release K 100 Q | Ichemco | Release K 100 Q is a synthetic resin blend. This product has a total solids content of 99-100%. Release K 100 Q is most commonly used as a release agent in polyolephinic self-adhesive tape applications. | |
| Release ST8 Dry | Ichemco | Release ST8 Dry is a synthetic resin-based compound. This product has a total solids content of 98-100%. Release ST8 Dry is most commonly used as a release coat in corona-treated polyolephynic backing adhesive tape applications. | |
| Release ST9 HM Dry | Ichemco | Release ST9 HM Dry is a synthetic resin-based compound. This product has a total solids content of 99-100%. Release ST9 HM Dry is most commonly used as a release coat in toluene or hexane/isopropyl alcohol-soluble corona-treated polyolephynic backing adhe...view more Release ST9 HM Dry is a synthetic resin-based compound. This product has a total solids content of 99-100%. Release ST9 HM Dry is most commonly used as a release coat in toluene or hexane/isopropyl alcohol-soluble corona-treated polyolephynic backing adhesive tape applications. view less | |
| S.L. 28 | Ichemco | S.L. 28 is a water-based dispersion of a carboxylated acrylnitrile-butadiene-copolymer. This product has a total solids content of 40.5-41.5% and a Brookfield viscosity at 25°C of less than 500 cPs. S.L. 28 is most commonly used in PVC film primer product...view more S.L. 28 is a water-based dispersion of a carboxylated acrylnitrile-butadiene-copolymer. This product has a total solids content of 40.5-41.5% and a Brookfield viscosity at 25°C of less than 500 cPs. S.L. 28 is most commonly used in PVC film primer production and fabric coating applications. view less | |
| S.L. 6103 | Ichemco | S.L. 6103 is a water-based emulsion of light molecular weight acrylic polymer. This product has a total solids content of 27.5-28.5%. S.L. 6103 is most commonly used as a thickening agent in water-based natural or synthetic latex coating applications. | |
| S.L. A 20 | Ichemco | S.L. A 20 is an APEO-free, water dispersion of acrylic copolymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 300 cPs. S.L. A 20 is most commonly used as a binder in water gloss enamel, primer, and ...view more S.L. A 20 is an APEO-free, water dispersion of acrylic copolymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 300 cPs. S.L. A 20 is most commonly used as a binder in water gloss enamel, primer, and clear varnish applications. view less | |
| S.L. AC 78 | Ichemco | S.L. AC 78 is a self crosslinking acrylic copolymer emulsion. This product has a total solids content of 41-43% and a Brookfield viscosity at 25°C of 10-50 cPs. S.L. AC 78 is most commonly used in wood lacquer, wood finish, and kitchen cabinet finish prod...view more S.L. AC 78 is a self crosslinking acrylic copolymer emulsion. This product has a total solids content of 41-43% and a Brookfield viscosity at 25°C of 10-50 cPs. S.L. AC 78 is most commonly used in wood lacquer, wood finish, and kitchen cabinet finish production applications. view less | |
| S.L. AU 11 | Ichemco | S.L. AU 11 is a self crosslinking acrylic copolymer emulsion. This product has a total solids content of 37-39% and a Brookfield viscosity at 25°C of less than 300 cPs. S.L. AU 11 is most commonly used in transparent wood floor varnish production applicat...view more S.L. AU 11 is a self crosslinking acrylic copolymer emulsion. This product has a total solids content of 37-39% and a Brookfield viscosity at 25°C of less than 300 cPs. S.L. AU 11 is most commonly used in transparent wood floor varnish production applications. view less | |
| S.L. AU 25 | Ichemco | S.L. AU 25 is a water dispersion of a polyurethane-acrylic copolymer. This product has a total solids content of 34-36%. S.L. AU 25 is most commonly used in wood finish coating applications. | |
| S.L. AU 401 | Ichemco | S.L. AU 401 is a waterborne, self-crosslinking aliphatic polyurethane-acrylic dispersion. This product has a total solids content of 35-37% and a Brookfield viscosity at 25°C of 25-75 cPs. S.L. AU 401 is most commonly used in transparent wood finish coati...view more S.L. AU 401 is a waterborne, self-crosslinking aliphatic polyurethane-acrylic dispersion. This product has a total solids content of 35-37% and a Brookfield viscosity at 25°C of 25-75 cPs. S.L. AU 401 is most commonly used in transparent wood finish coating applications. view less | |
| Solacril 105 ACP | Ichemco | Solacril 105 ACP is a solventborne, solvent-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 2-5 cm, and has a peel of 2500-3000 g/in. Solacril 105 ACP is most commonly used in the production of protectiv...view more Solacril 105 ACP is a solventborne, solvent-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 2-5 cm, and has a peel of 2500-3000 g/in. Solacril 105 ACP is most commonly used in the production of protective films for plastic and metal surfaces, as well as removable tapes and labels. view less | |
| Solacril 2010 | Ichemco | Solacril 2010 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 53-57% and a peel of 1200-1600 g/in. Solacril 2010 is most commonly used in industrial pressure sensitive adhesive tape and decal produc...view more Solacril 2010 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 53-57% and a peel of 1200-1600 g/in. Solacril 2010 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. view less | |
| Solacril 203 | Ichemco | Solacril 203 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42% and a peel of 600-800 g/in. Solacril 203 is most commonly used in protective film applications. | |
| Solacril 204 | Ichemco | Solacril 204 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 1-3 cm, and a peel of 500-800 g/in. Solacril 204 is most commonly used in protective film applications. | |
| Solacril 44 | Ichemco | Solacril 44 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of greater than 20 cm, and a peel of 1000-1300 g/in. Solacril 44 is most commonly used in plastic, paper, polyurethane ...view more Solacril 44 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of greater than 20 cm, and a peel of 1000-1300 g/in. Solacril 44 is most commonly used in plastic, paper, polyurethane foam, fabric, and leather substrate applications. view less | |
| Solacril 44 D | Ichemco | Solacril 44 D is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36%, has a tack of 3-9 cm, and a peel of 950-1450 g/in. Solacril 44 D is most commonly used in plastic, paper, polyurethane foam, fab...view more Solacril 44 D is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36%, has a tack of 3-9 cm, and a peel of 950-1450 g/in. Solacril 44 D is most commonly used in plastic, paper, polyurethane foam, fabric, and leather substrate applications. view less | |
| Solacril 55 MED | Ichemco | Solacril 55 MED is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42%, has a tack of 3-5 cm, and a peel of 1700-1900 g/in. Solacril 55 MED is most commonly used in plastic, paper, polyurethane foam...view more Solacril 55 MED is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42%, has a tack of 3-5 cm, and a peel of 1700-1900 g/in. Solacril 55 MED is most commonly used in plastic, paper, polyurethane foam, fabric, and leather substrate applications. view less | |
| Solacril 701 | Ichemco | Solacril 701 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 42-44% and a peel of 2000-2400 g/in. Solacril 701 is most commonly used in plastic film as well as paper, polyurethane foam, fabric, and ...view more Solacril 701 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 42-44% and a peel of 2000-2400 g/in. Solacril 701 is most commonly used in plastic film as well as paper, polyurethane foam, fabric, and leather substrate applications. view less | |
| Solacril 744 | Ichemco | Solacril 744 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 48-52%, has a tack of 5-10 cm, and has a peel of 900-1100 g/in. Solacril 744 is most commonly used in industrial pressure sensitive adhes...view more Solacril 744 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 48-52%, has a tack of 5-10 cm, and has a peel of 900-1100 g/in. Solacril 744 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. view less | |
| Solacril 744 AS | Ichemco | Solacril 744 AS is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42%, has a tack of 3-8 cm, and has a peel of 900-1200 g/in. Solacril 744 AS is most commonly used in industrial pressure sensitive ...view more Solacril 744 AS is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42%, has a tack of 3-8 cm, and has a peel of 900-1200 g/in. Solacril 744 AS is most commonly used in industrial pressure sensitive adhesive tape, label, and decal production applications. view less | |
| Solacril 744 D | Ichemco | Solacril 744 D is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36% and a peel of 1100 g/in. Solacril 744 D is most commonly used in industrial pressure sensitive adhesive tape and decal productio...view more Solacril 744 D is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36% and a peel of 1100 g/in. Solacril 744 D is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. view less | |
| Solacril 744 T | Ichemco | Solacril 744 T is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 19-21%, has a tack of 5-10 cm, and has a peel of 850-1100 g/in. Solacril 744 T is most commonly used in industrial pressure sensitive a...view more Solacril 744 T is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 19-21%, has a tack of 5-10 cm, and has a peel of 850-1100 g/in. Solacril 744 T is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. view less | |
| Solacril 758 | Ichemco | Solacril 758 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 49-51%. Solacril 758 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. | |
| Solacril 758/35 | Ichemco | Solacril 758/35 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36%. Solacril 758/35 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. | |
| Solacril 758/46 | Ichemco | Solacril 758/46 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 45-47%. Solacril 758/46 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. | |
| Solacril 957 MED | Ichemco | Solacril 957 MED is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 45-47% and a peel of 1400-1600 g/in. Solacril 957 MED is most commonly used in medical applications. | |
| Solacril SPR 12 M3 | Ichemco | Solacril SPR 12 M3 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 8.5-10.5%. Solacril SPR 12 M3 is most commonly used in spray applications. | |
| Solacril WS 33 | Ichemco | Solacril WS 33 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 29-31%. Solacril WS 33 is most commonly used as a base in finished adhesive applications. | |
| Solacril WS 40 | Ichemco | Solacril WS 40 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52% and a peel of 800-1200 g/in. Solacril WS 40 is most commonly used in single and double-sided tape, as well as water-soluble labe...view more Solacril WS 40 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52% and a peel of 800-1200 g/in. Solacril WS 40 is most commonly used in single and double-sided tape, as well as water-soluble label production applications. view less | |
| Solacril WS 60 | Ichemco | Solacril WS 60 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52% and a peel of 600-900 g/in. Solacril WS 60 is most commonly used in single and double-sided tape, as well as water-soluble label...view more Solacril WS 60 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52% and a peel of 600-900 g/in. Solacril WS 60 is most commonly used in single and double-sided tape, as well as water-soluble label production applications. view less | |
| Solacril WS 60 AF | Ichemco | Solacril WS 60 AF is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52%. Solacril WS 60 AF is most commonly used in single and double-sided tape, as well as water-soluble label production applicati...view more Solacril WS 60 AF is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52%. Solacril WS 60 AF is most commonly used in single and double-sided tape, as well as water-soluble label production applications. view less | |
| Tackifier 15 | Ichemco | Tackifier 15 is a solvent-free, waterborne tackifier dispersion of a mixed alyphatic-aromatic hydrocarbon resin. This product has a total solids content of 49-52% and a Brookfield viscosity at 25°C of 50-1000 mPa.s. Tackifier 15 is most commonly used to...view more Tackifier 15 is a solvent-free, waterborne tackifier dispersion of a mixed alyphatic-aromatic hydrocarbon resin. This product has a total solids content of 49-52% and a Brookfield viscosity at 25°C of 50-1000 mPa.s. Tackifier 15 is most commonly used to enhance adhesive performance in polymeric latex, and adhesive tape and label applications. view less | |
| Tackifier 55 | Ichemco | Tackifier 55 is a solvent-free, waterborne dispersion of modified natural resins. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 400-1000 mPa.s. Tackifier 55 is most commonly used in acrylic, SBR, and NR adhesive m...view more Tackifier 55 is a solvent-free, waterborne dispersion of modified natural resins. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 400-1000 mPa.s. Tackifier 55 is most commonly used in acrylic, SBR, and NR adhesive modification applications. view less | |
| Tackifier 65 | Ichemco | Tackifier 65 is a solvent-free, waterborne tackifier dispersion. This product has a total solids content of 50-54% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Tackifier 65 is most commonly used to enhance adhesive performance in polymeric ...view more Tackifier 65 is a solvent-free, waterborne tackifier dispersion. This product has a total solids content of 50-54% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Tackifier 65 is most commonly used to enhance adhesive performance in polymeric latex, as well as self-adhesive tape and label applications. view less | |
| Tackifier 68 | Ichemco | Tackifier 68 is a solvent-free, waterborne dispersion of a stabilized rosin ester. This product has a total solids content of 52-54% and a Brookfield viscosity at 25°C of 200-600 cPs. Tackifier 68 is most commonly used to enhance pressure sensitive proper...view more Tackifier 68 is a solvent-free, waterborne dispersion of a stabilized rosin ester. This product has a total solids content of 52-54% and a Brookfield viscosity at 25°C of 200-600 cPs. Tackifier 68 is most commonly used to enhance pressure sensitive properties in acrylic, SBR, and synthetic water-based polymer adhesive applications. view less | |
| Tackifier 71 | Ichemco | Tackifier 71 is an acrylic aqueous dispersion. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of 40-150 mPa.s. Tackifier 71 is most commonly used as a tackifier in water-based acrylic pressure sensitive adhesive produ...view more Tackifier 71 is an acrylic aqueous dispersion. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of 40-150 mPa.s. Tackifier 71 is most commonly used as a tackifier in water-based acrylic pressure sensitive adhesive production applications. view less | |
| Tackifier 80 | Ichemco | Tackifier 80 is a solvent-free, waterborne tackifier dispersion. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 100-500 cPs. Tackifier 80 is most commonly used as a tackifier in acrylic polymer-based pressure sensi...view more Tackifier 80 is a solvent-free, waterborne tackifier dispersion. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 100-500 cPs. Tackifier 80 is most commonly used as a tackifier in acrylic polymer-based pressure sensitive adhesive production applications. view less | |
| Tackifier 95 | Ichemco | Tackifier 95 is a solvent-free, waterborne tackifier dispersion. This product has a total solids content of 50-57% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Tackifier 95 is most commonly used to enhance pressure sensitive properties in p...view more Tackifier 95 is a solvent-free, waterborne tackifier dispersion. This product has a total solids content of 50-57% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Tackifier 95 is most commonly used to enhance pressure sensitive properties in polymeric latex, as well as self-adhesive tape and label applications. view less | |
| Tackmelt A 34 MED | Ichemco | Tackmelt A 34 MED is a hot melt pressure sensitive adhesive based on SIS synthetic rubber and synthetic resins. This product has a viscosity at 150°C of 7000-10,000 mPa.s and a viscosity at 185°C of 1500-2500 mPa.s. Tackmelt A 34 MED is most commonly used...view more Tackmelt A 34 MED is a hot melt pressure sensitive adhesive based on SIS synthetic rubber and synthetic resins. This product has a viscosity at 150°C of 7000-10,000 mPa.s and a viscosity at 185°C of 1500-2500 mPa.s. Tackmelt A 34 MED is most commonly used in medical applications where skin contact is expected. view less | |
| Tackmelt A 43 MED | Ichemco | Tackmelt A 43 MED is a hot melt pressure sensitive adhesive based on SIS synthetic rubber and synthetic resins. This product has a viscosity at 150°C of 6000-8000 mPa.s and a viscosity at 185°C of 1200-2000 mPa.s. Tackmelt A 43 MED is most commonly used i...view more Tackmelt A 43 MED is a hot melt pressure sensitive adhesive based on SIS synthetic rubber and synthetic resins. This product has a viscosity at 150°C of 6000-8000 mPa.s and a viscosity at 185°C of 1200-2000 mPa.s. Tackmelt A 43 MED is most commonly used in medical applications where skin contact is expected. view less | |
| Tackmelt A 44 | Ichemco | Tackmelt A 44 is a hot melt pressure sensitive adhesive based on SIS synthetic rubber and synthetic resins. It contains special antioxidants to guarantee a good ageing resistance. Tackmelt A 44 is most commonly used in label and double-sided adhesive tape...view more Tackmelt A 44 is a hot melt pressure sensitive adhesive based on SIS synthetic rubber and synthetic resins. It contains special antioxidants to guarantee a good ageing resistance. Tackmelt A 44 is most commonly used in label and double-sided adhesive tape applications. view less | |
| Tackmelt A 44 UV | Ichemco | Tackmelt A 44 UV is a hot-melt adhesive, based on SIS synthetic rubber and synthetic resins. It contains special antioxidants and UV stabilizer to guarantee a good ageing and light resistance. This product has a viscosity at 150°C of 7000-13,000 mPa.s and...view more Tackmelt A 44 UV is a hot-melt adhesive, based on SIS synthetic rubber and synthetic resins. It contains special antioxidants and UV stabilizer to guarantee a good ageing and light resistance. This product has a viscosity at 150°C of 7000-13,000 mPa.s and a viscosity at 185°C of 2000-5000 mPa.s. Tackmelt A 44 UV is most commonly used in label and double-sided adhesive tape applications. view less | |
| Tackmelt A40 | Ichemco | Tackmelt A40 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 12,000-20,000 mPa.s and a viscosity at 185°C of 4000-8000 mPa.s. Tackmelt A40 is most commonly used in permanent label production applications. | |
| Tackmelt A43 A | Ichemco | Tackmelt A43 A is an amber-colored hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 17,000-27,000 mPa.s and a viscosity at 185°C of 4000-6000 mPa.s. Tackmelt A43 A is most commonly used in label and double-sided tape produc...view more Tackmelt A43 A is an amber-colored hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 17,000-27,000 mPa.s and a viscosity at 185°C of 4000-6000 mPa.s. Tackmelt A43 A is most commonly used in label and double-sided tape production applications. view less | |
| Tackmelt A45 | Ichemco | Tackmelt A45 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 18,000-30,000 mPa.s and a viscosity at 180°C of 6000-9000 mPa.s. Tackmelt A45 is most commonly used in label and double-sided tape production applications. | |
| Tackmelt A46 M | Ichemco | Tackmelt A46 M is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 12,000-16,000 mPa.s and a viscosity at 185°C of 3000-7000 mPa.s. Tackmelt A46 M is most commonly used in label and double-sided tape production applications...view more Tackmelt A46 M is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 12,000-16,000 mPa.s and a viscosity at 185°C of 3000-7000 mPa.s. Tackmelt A46 M is most commonly used in label and double-sided tape production applications. view less | |
| Tackmelt A48 M2 | Ichemco | Tackmelt A48 M2 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 60,000-90,000 mPa.s and a viscosity at 180°C of 16,000-25,000 mPa.s. Tackmelt A48 M2 is most commonly used in adhesive applications where high tack, cohesi...view more Tackmelt A48 M2 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 60,000-90,000 mPa.s and a viscosity at 180°C of 16,000-25,000 mPa.s. Tackmelt A48 M2 is most commonly used in adhesive applications where high tack, cohesion, and thermal resistance are required. view less | |
| Tackmelt A49 | Ichemco | Tackmelt A49 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 20,000-40,000 mPa.s and a viscosity at 185°C of 4000-8000 mPa.s. Tackmelt A49 is most commonly used in label and double-sided tape production applications. | |
| Tackmelt A8 | Ichemco | Tackmelt A8 is a hot melt pressure sensitive adhesive based on thermoplastic elastomers (SIS) and synthetic resins. Special synergic antioxidants are added to guarantee the best ageing resistance. This product has a viscosity at 150°C of 9600-12500 mPa.s...view more Tackmelt A8 is a hot melt pressure sensitive adhesive based on thermoplastic elastomers (SIS) and synthetic resins. Special synergic antioxidants are added to guarantee the best ageing resistance. This product has a viscosity at 150°C of 9600-12500 mPa.s and a viscosity at 180°C of 2500-4500 mPa.s. Tackmelt A8 is most commonly used at medium-low temperatures to laminate different products such as synthetic leathers, foams, non-wovens, and fabrics. view less | |
| Tackmelt A9 | Ichemco | Tackmelt A9 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 20,000-40,000 mPa.s and a viscosity at 180°C of 7000-11,000 mPa.s. Tackmelt A9 is most commonly used in medium-low temperature lamination applications. | |
| Tackmelt HM 10 A | Ichemco | Tackmelt HM 10 A is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 25,000-35,000 mPa.s and a viscosity at 185°C of 5000-10,000 mPa.s. Tackmelt HM 10 A is most commonly used in dielectric tape production applications. | |
| Tackmelt HM 15 A | Ichemco | Tackmelt HM 15 A is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 50,000-80,000 mPa.s and a viscosity at 180°C of 20,000-25,000 mPa.s. Tackmelt HM 15 A is most commonly used in double-sided adhesive tape, as well as insu...view more Tackmelt HM 15 A is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 50,000-80,000 mPa.s and a viscosity at 180°C of 20,000-25,000 mPa.s. Tackmelt HM 15 A is most commonly used in double-sided adhesive tape, as well as insulating foam and panel production applications. view less | |
| Tackmelt HM 15 B | Ichemco | Tackmelt HM 15 B is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 60,000-90,000 mPa.s and a viscosity at 180°C of 15,000-20,000 mPa.s. Tackmelt HM 15 B is most commonly used in double-sided adhesive tape, as well as insu...view more Tackmelt HM 15 B is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 60,000-90,000 mPa.s and a viscosity at 180°C of 15,000-20,000 mPa.s. Tackmelt HM 15 B is most commonly used in double-sided adhesive tape, as well as insulating foam and panel production applications. view less | |
| Tackmelt R 002 | Ichemco | Tackmelt R 002 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 90,000-160,000 mPa.s and a viscosity at 180°C of 20,000-40,000 mPa.s. Tackmelt R 002 is most commonly used in opaque removable film and paper label producti...view more Tackmelt R 002 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 90,000-160,000 mPa.s and a viscosity at 180°C of 20,000-40,000 mPa.s. Tackmelt R 002 is most commonly used in opaque removable film and paper label production applications. view less | |
| Tackmelt R 004 | Ichemco | Tackmelt R 004 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 65,000-80,000 mPa.s and a viscosity at 185°C of 11,000-20,000 mPa.s. Tackmelt R 004 is most commonly used in opaque removable film and paper label productio...view more Tackmelt R 004 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 65,000-80,000 mPa.s and a viscosity at 185°C of 11,000-20,000 mPa.s. Tackmelt R 004 is most commonly used in opaque removable film and paper label production applications. view less | |
| Tackmelt R 008 | Ichemco | Tackmelt R 008 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 100,000-130,000 mPa.s and a viscosity at 185°C of 12,000-20,000 mPa.s. Tackmelt R 008 is most commonly used in opaque removable film and paper label product...view more Tackmelt R 008 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 100,000-130,000 mPa.s and a viscosity at 185°C of 12,000-20,000 mPa.s. Tackmelt R 008 is most commonly used in opaque removable film and paper label production applications. view less | |
| Tacksol 10/82 B | Ichemco | Tacksol 10/82 B is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 21-23%, a tack of 1-4 cm, and a peel of 400-600 g/in. Tacksol 10/82 B is most commonly used in protective film and tape production ap...view more Tacksol 10/82 B is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 21-23%, a tack of 1-4 cm, and a peel of 400-600 g/in. Tacksol 10/82 B is most commonly used in protective film and tape production applications. view less | |
| Tacksol 10/83 B | Ichemco | Tacksol 10/83 B is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 21-23%, a tack of 1-3 cm, and a peel of 500-1200 g/in. Tacksol 10/83 B is most commonly used in protective film and tape production app...view more Tacksol 10/83 B is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 21-23%, a tack of 1-3 cm, and a peel of 500-1200 g/in. Tacksol 10/83 B is most commonly used in protective film and tape production applications. view less | |
| Tacksol 10/83 EPM | Ichemco | Tacksol 10/83 EPM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 17%, a tack of 2-6 cm, and a peel of 600-1000 g/in. Tacksol 10/83 EPM is most commonly used in the production of protective films and...view more Tacksol 10/83 EPM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 17%, a tack of 2-6 cm, and a peel of 600-1000 g/in. Tacksol 10/83 EPM is most commonly used in the production of protective films and tapes formulated for use on rough surfaces. view less | |
| Tacksol 10/84 | Ichemco | Tacksol 10/84 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 29-31%, a tack of 5-10 cm, and a peel of 500-1000 g/in. Tacksol 10/84 is most commonly used in protective film and tape production applic...view more Tacksol 10/84 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 29-31%, a tack of 5-10 cm, and a peel of 500-1000 g/in. Tacksol 10/84 is most commonly used in protective film and tape production applications. view less | |
| Tacksol 10/85 | Ichemco | Tacksol 10/85 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 14-16%, a tack of 1 cm, and a peel of 750 g/in. Tacksol 10/85 is most commonly used in protective film and tape production applications. | |
| Tacksol 10/85 HST | Ichemco | Tacksol 10/85 HST is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 23-27%, a tack of 0.5-5 cm, and a peel of 600-800 g/in. Tacksol 10/85 HST is most commonly used in protective pressure sensitive film...view more Tacksol 10/85 HST is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 23-27%, a tack of 0.5-5 cm, and a peel of 600-800 g/in. Tacksol 10/85 HST is most commonly used in protective pressure sensitive film and tape production applications. view less | |
| Tacksol 10/86 | Ichemco | Tacksol 10/86 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 19-21%, a tack of 2-4 cm, and a peel of 800-1100 g/in. Tacksol 10/86 is most commonly used in pressure sensitive film and tape production...view more Tacksol 10/86 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 19-21%, a tack of 2-4 cm, and a peel of 800-1100 g/in. Tacksol 10/86 is most commonly used in pressure sensitive film and tape production applications. view less | |
| Tacksol 10/86 EPM | Ichemco | Tacksol 10/86 EPM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 16-18%, a tack of 3-6 cm, and a peel of 200-600 g/in. Tacksol 10/86 EPM is most commonly used in protective pressure sensitive film a...view more Tacksol 10/86 EPM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 16-18%, a tack of 3-6 cm, and a peel of 200-600 g/in. Tacksol 10/86 EPM is most commonly used in protective pressure sensitive film and tape production applications. view less |
