Blendex 55 F | Ichemco | Blendex 55 F is a solvent-free, one-component moisture curing polyurethane adhesive. This product has a viscosity at 100°C of 750-1000 mPa.s. Blendex 55 F is most commonly used in fabric and film lamination applications. | |
Blendex 70 A | Ichemco | Blendex 70 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate). solvent-based, heat sealable adhesive. This product has a total solids content of 64-66% and a Brookfield viscosity at 25°C of 670-870 cPs. Blendex 70 A is most common...view more Blendex 70 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate). solvent-based, heat sealable adhesive. This product has a total solids content of 64-66% and a Brookfield viscosity at 25°C of 670-870 cPs. Blendex 70 A is most commonly used as a solvent adhesive in coating system applications. view less | |
Blendex 75 A | Ichemco | Blendex 75 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate) solvent-based, heat sealable adhesive. This product has a total solids content of 74-76% and a Brookfield viscosity at 25°C of 3300-5300 cPs. Blendex 75 A is most comm...view more Blendex 75 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate) solvent-based, heat sealable adhesive. This product has a total solids content of 74-76% and a Brookfield viscosity at 25°C of 3300-5300 cPs. Blendex 75 A is most commonly used as a solvent adhesive in coating system applications. view less | |
Blendex 81 T | Ichemco | Blendex 81 T is a a two-component polyurethane adhesive in ethyl acetate, solvent-based, heat sealable adhesive. This product has a total solids content of 58-62% and a Brookfield viscosity at 25°C of 2300-4300 cPs. Blendex 81 T is most commonly used in f...view more Blendex 81 T is a a two-component polyurethane adhesive in ethyl acetate, solvent-based, heat sealable adhesive. This product has a total solids content of 58-62% and a Brookfield viscosity at 25°C of 2300-4300 cPs. Blendex 81 T is most commonly used in film and fabric lamination applications. view less | |
Blendex B1 | Ichemco | Blendex B1 is a liquid blend of synthetic polymers and natural resins. This product has a viscosity at 3500-8000 cPa. Blendex B1 is most commonly used in solvent adhesive production applications. | |
Blendex Seal DH 14 | Ichemco | Blendex Seal DH 14 is a polyester based, aliphatic acqueous polyurethane dispersion, water-based, heat sealable adhesive. This product has a total solids content of 29-31%. Blendex Seal DH 14 is most commonly used as a heat sealable adhesive in textile ap...view more Blendex Seal DH 14 is a polyester based, aliphatic acqueous polyurethane dispersion, water-based, heat sealable adhesive. This product has a total solids content of 29-31%. Blendex Seal DH 14 is most commonly used as a heat sealable adhesive in textile applications. view less | |
Blendex Seal DH 70 | Ichemco | Blendex Seal DH 70 is a water-based, heat sealable adhesive based on modified acrylic polymers. This product has a total solids content of 23-25% and a Brookfield viscosity at 25°C of 8000-16,000 mPa.s. Blendex Seal DH 70 is most commonly used as a heat s...view more Blendex Seal DH 70 is a water-based, heat sealable adhesive based on modified acrylic polymers. This product has a total solids content of 23-25% and a Brookfield viscosity at 25°C of 8000-16,000 mPa.s. Blendex Seal DH 70 is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. view less | |
Blendex Seal DH 76 | Ichemco | Blendex Seal DH 76 is a water-based, heat sealable adhesive, formulated with modified acrylic co-polymers.. This product has a total solids content of 37.5-39.5% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Blendex Seal DH 76 is most commonly us...view more Blendex Seal DH 76 is a water-based, heat sealable adhesive, formulated with modified acrylic co-polymers.. This product has a total solids content of 37.5-39.5% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Blendex Seal DH 76 is most commonly used as a heat sealable elastic adhesive in woven, non-woven, leather, foam, and synthetic leather applications. view less | |
Blendex Seal DH 8 | Ichemco | Blendex Seal DH 8 is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 52-54%, and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Blendex Seal DH 8 is most commonly used as a heat s...view more Blendex Seal DH 8 is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 52-54%, and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Blendex Seal DH 8 is most commonly used as a heat sealable adhesive in fabric, leather, foam, non-woven, and synthetic leather applications. view less | |
Blendex Seal DH 8 M | Ichemco | Blendex Seal DH 8 M is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 3000-6500 mPa.s. Blendex Seal DH 8 M is most commonly used as a heat ...view more Blendex Seal DH 8 M is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 3000-6500 mPa.s. Blendex Seal DH 8 M is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. view less | |
Blendex Seal DH 8 M (V2) | Ichemco | Blendex Seal DH 8 M (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal DH 8 M (V2) is most commonly used as a heat sealable adhesive in f...view more Blendex Seal DH 8 M (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal DH 8 M (V2) is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. view less | |
Blendex Seal DH 8 M (V3) | Ichemco | Blendex Seal DH 8 M (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal DH 8 M (V3) is most commonly used as a heat sealable adhesive in f...view more Blendex Seal DH 8 M (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal DH 8 M (V3) is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. view less | |
Blendex WUM | Ichemco | Blendex WUM is a water-based, synthetic latex heat sealable adhesive. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Blendex WUM is most commonly used as a remoistable adhesive in paper and cardboa...view more Blendex WUM is a water-based, synthetic latex heat sealable adhesive. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Blendex WUM is most commonly used as a remoistable adhesive in paper and cardboard applications. view less | |
Solacril 105 ACP | Ichemco | Solacril 105 ACP is a solventborne, solvent-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 2-5 cm, and has a peel of 2500-3000 g/in. Solacril 105 ACP is most commonly used in the production of protectiv...view more Solacril 105 ACP is a solventborne, solvent-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 2-5 cm, and has a peel of 2500-3000 g/in. Solacril 105 ACP is most commonly used in the production of protective films for plastic and metal surfaces, as well as removable tapes and labels. view less | |
Solacril 2010 | Ichemco | Solacril 2010 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 53-57% and a peel of 1200-1600 g/in. Solacril 2010 is most commonly used in industrial pressure sensitive adhesive tape and decal produc...view more Solacril 2010 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 53-57% and a peel of 1200-1600 g/in. Solacril 2010 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. view less | |
Solacril 203 | Ichemco | Solacril 203 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42% and a peel of 600-800 g/in. Solacril 203 is most commonly used in protective film applications. | |
Solacril 204 | Ichemco | Solacril 204 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 1-3 cm, and a peel of 500-800 g/in. Solacril 204 is most commonly used in protective film applications. | |
Solacril 44 | Ichemco | Solacril 44 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of greater than 20 cm, and a peel of 1000-1300 g/in. Solacril 44 is most commonly used in plastic, paper, polyurethane ...view more Solacril 44 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of greater than 20 cm, and a peel of 1000-1300 g/in. Solacril 44 is most commonly used in plastic, paper, polyurethane foam, fabric, and leather substrate applications. view less | |
Solacril 44 D | Ichemco | Solacril 44 D is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36%, has a tack of 3-9 cm, and a peel of 950-1450 g/in. Solacril 44 D is most commonly used in plastic, paper, polyurethane foam, fab...view more Solacril 44 D is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36%, has a tack of 3-9 cm, and a peel of 950-1450 g/in. Solacril 44 D is most commonly used in plastic, paper, polyurethane foam, fabric, and leather substrate applications. view less | |
Solacril 55 MED | Ichemco | Solacril 55 MED is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42%, has a tack of 3-5 cm, and a peel of 1700-1900 g/in. Solacril 55 MED is most commonly used in plastic, paper, polyurethane foam...view more Solacril 55 MED is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42%, has a tack of 3-5 cm, and a peel of 1700-1900 g/in. Solacril 55 MED is most commonly used in plastic, paper, polyurethane foam, fabric, and leather substrate applications. view less | |
Solacril 701 | Ichemco | Solacril 701 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 42-44% and a peel of 2000-2400 g/in. Solacril 701 is most commonly used in plastic film as well as paper, polyurethane foam, fabric, and ...view more Solacril 701 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 42-44% and a peel of 2000-2400 g/in. Solacril 701 is most commonly used in plastic film as well as paper, polyurethane foam, fabric, and leather substrate applications. view less | |
Solacril 744 | Ichemco | Solacril 744 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 48-52%, has a tack of 5-10 cm, and has a peel of 900-1100 g/in. Solacril 744 is most commonly used in industrial pressure sensitive adhes...view more Solacril 744 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 48-52%, has a tack of 5-10 cm, and has a peel of 900-1100 g/in. Solacril 744 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. view less | |
Solacril 744 AS | Ichemco | Solacril 744 AS is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42%, has a tack of 3-8 cm, and has a peel of 900-1200 g/in. Solacril 744 AS is most commonly used in industrial pressure sensitive ...view more Solacril 744 AS is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42%, has a tack of 3-8 cm, and has a peel of 900-1200 g/in. Solacril 744 AS is most commonly used in industrial pressure sensitive adhesive tape, label, and decal production applications. view less | |
Solacril 744 D | Ichemco | Solacril 744 D is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36% and a peel of 1100 g/in. Solacril 744 D is most commonly used in industrial pressure sensitive adhesive tape and decal productio...view more Solacril 744 D is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36% and a peel of 1100 g/in. Solacril 744 D is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. view less | |
Solacril 744 T | Ichemco | Solacril 744 T is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 19-21%, has a tack of 5-10 cm, and has a peel of 850-1100 g/in. Solacril 744 T is most commonly used in industrial pressure sensitive a...view more Solacril 744 T is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 19-21%, has a tack of 5-10 cm, and has a peel of 850-1100 g/in. Solacril 744 T is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. view less | |
Solacril 758 | Ichemco | Solacril 758 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 49-51%. Solacril 758 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. | |
Solacril 758/35 | Ichemco | Solacril 758/35 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36%. Solacril 758/35 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. | |
Solacril 758/46 | Ichemco | Solacril 758/46 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 45-47%. Solacril 758/46 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. | |
Solacril 957 MED | Ichemco | Solacril 957 MED is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 45-47% and a peel of 1400-1600 g/in. Solacril 957 MED is most commonly used in medical applications. | |
Solacril SPR 12 M3 | Ichemco | Solacril SPR 12 M3 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 8.5-10.5%. Solacril SPR 12 M3 is most commonly used in spray applications. | |
Solacril WS 33 | Ichemco | Solacril WS 33 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 29-31%. Solacril WS 33 is most commonly used as a base in finished adhesive applications. | |
Solacril WS 40 | Ichemco | Solacril WS 40 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52% and a peel of 800-1200 g/in. Solacril WS 40 is most commonly used in single and double-sided tape, as well as water-soluble labe...view more Solacril WS 40 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52% and a peel of 800-1200 g/in. Solacril WS 40 is most commonly used in single and double-sided tape, as well as water-soluble label production applications. view less | |
Solacril WS 60 | Ichemco | Solacril WS 60 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52% and a peel of 600-900 g/in. Solacril WS 60 is most commonly used in single and double-sided tape, as well as water-soluble label...view more Solacril WS 60 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52% and a peel of 600-900 g/in. Solacril WS 60 is most commonly used in single and double-sided tape, as well as water-soluble label production applications. view less | |
Solacril WS 60 AF | Ichemco | Solacril WS 60 AF is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52%. Solacril WS 60 AF is most commonly used in single and double-sided tape, as well as water-soluble label production applicati...view more Solacril WS 60 AF is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52%. Solacril WS 60 AF is most commonly used in single and double-sided tape, as well as water-soluble label production applications. view less | |
Tackwhite A 305 SL | Ichemco | Tackwhite A 305 SL is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL is most commonly used in permanent paper label applications where a high...view more Tackwhite A 305 SL is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL is most commonly used in permanent paper label applications where a higher adhesive power is required. view less | |
Tackwhite A 305 SL (V2) | Ichemco | Tackwhite A 305 SL (V2) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion.Tackwhite A 305 SL (V2) is most commonly used in permanent paper label applications wh...view more Tackwhite A 305 SL (V2) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion.Tackwhite A 305 SL (V2) is most commonly used in permanent paper label applications where a higher adhesive power is required. view less | |
Tackwhite A 305 SL (V3) | Ichemco | Tackwhite A 305 SL (V3) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL (V3) is most commonly used in permanent paper label applications w...view more Tackwhite A 305 SL (V3) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL (V3) is most commonly used in permanent paper label applications where a higher adhesive power is required. view less | |
Tackwhite A 33 | Ichemco | Tackwhite A 33 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 200-400 mPa.s. Tackwhite A 33 is most commonly used in transparent label, transparent tape, and li...view more Tackwhite A 33 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 200-400 mPa.s. Tackwhite A 33 is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. view less | |
Tackwhite A 33 (V1) | Ichemco | Tackwhite A 33 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 33 (V1) is most commonly used in transparent label, transpar...view more Tackwhite A 33 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 33 (V1) is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. view less | |
Tackwhite A 33 (V2) | Ichemco | Tackwhite A 33 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 33 (V2) is most commonly used in transparent label, transpar...view more Tackwhite A 33 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 33 (V2) is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. view less | |
Tackwhite A 38 | Ichemco | Tackwhite A 38 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 47-49%, a tack of 2-6 cm, and a peel of 900-1200 g/in. Tackwhite A 38 is most commonly used in wash removable label applications. | |
Tackwhite A 4 MED | Ichemco | Tackwhite A 4 MED is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite A 4 MED is most commonly used in pressure sensitive article applicatio...view more Tackwhite A 4 MED is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite A 4 MED is most commonly used in pressure sensitive article applications where higher tack, adhesion, water-resistance, and cold-resistance properties are required. view less | |
Tackwhite A 4 MED (V2) | Ichemco | Tackwhite A 4 MED (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 4 MED (V2) is most commonly used in pressure sensitive ar...view more Tackwhite A 4 MED (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 4 MED (V2) is most commonly used in pressure sensitive article applications where higher tack, adhesion, water-resistance, and cold-resistance properties are required. view less | |
Tackwhite A 62 SF | Ichemco | Tackwhite A 62 SF is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of 150-500. Tackwhite A 62 SF is most commonly used in paper and plastic permanent label, as well ...view more Tackwhite A 62 SF is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of 150-500. Tackwhite A 62 SF is most commonly used in paper and plastic permanent label, as well as double-sided tape production applications. view less | |
Tackwhite A 62 SF (V2) | Ichemco | Tackwhite A 62 SF (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 62 SF (V2) is most commonly used in paper and plastic per...view more Tackwhite A 62 SF (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 62 SF (V2) is most commonly used in paper and plastic permanent label, as well as double-sided tape production applications. view less | |
Tackwhite A 62 SF2 | Ichemco | Tackwhite A 62 SF2 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Tackwhite A 62 SF2 is most commonly used in permanent paper and film label, as...view more Tackwhite A 62 SF2 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Tackwhite A 62 SF2 is most commonly used in permanent paper and film label, as well as double-sided tape applications. view less | |
Tackwhite A 62 SF2 (V2) | Ichemco | Tackwhite A 62 SF2 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 62 SF2 (V2) is most commonly used in permanent paper and...view more Tackwhite A 62 SF2 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 62 SF2 (V2) is most commonly used in permanent paper and film label, as well as double-sided tape applications. view less | |
Tackwhite A 65 | Ichemco | Tackwhite A 65 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% of less than 400 mPa.s. Tackwhite A 65 is most commonly used in pressure sensitive packaging production and office tape on BOPP film app...view more Tackwhite A 65 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% of less than 400 mPa.s. Tackwhite A 65 is most commonly used in pressure sensitive packaging production and office tape on BOPP film applications. view less | |
Tackwhite A 65 (V2) | Ichemco | Tackwhite A 65 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% of less than 17,000-27,000 mPa.s. Tackwhite A 65 (V2) is most commonly used in pressure sensitive packaging production and office t...view more Tackwhite A 65 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% of less than 17,000-27,000 mPa.s. Tackwhite A 65 (V2) is most commonly used in pressure sensitive packaging production and office tape on BOPP film applications. view less | |
Tackwhite A 76 D | Ichemco | Tackwhite A 76 D is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 5-10 cm, and a peel of 1000-5000 g/in. Tackwhite A 76 D is most commonly used in permanent paper and film label production ...view more Tackwhite A 76 D is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 5-10 cm, and a peel of 1000-5000 g/in. Tackwhite A 76 D is most commonly used in permanent paper and film label production applications. view less | |
Tackwhite A 77 | Ichemco | Tackwhite A 77 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 61-63% as a Brookfield viscosity at 25°C of 500-3000 mPa.s. Tackwhite A 77 is most commonly used in permanent paper and film label production a...view more Tackwhite A 77 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 61-63% as a Brookfield viscosity at 25°C of 500-3000 mPa.s. Tackwhite A 77 is most commonly used in permanent paper and film label production applications. view less | |
Tackwhite A 80 FR | Ichemco | Tackwhite A 80 FR is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 52-56%, a tack of 5 cm, and a peel of 400 g/in. Tackwhite A 80 FR is most commonly used as a fire retardant in film coating applications. | |
Tackwhite A 90 | Ichemco | Tackwhite A 90 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 63-67% as a Brookfield viscosity at 25°C of 500-2000 mPa.s. Tackwhite A 90 is most commonly used in the production of permanent labels meant to...view more Tackwhite A 90 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 63-67% as a Brookfield viscosity at 25°C of 500-2000 mPa.s. Tackwhite A 90 is most commonly used in the production of permanent labels meant to be applied to rough surfaces. view less | |
Tackwhite A5 MED | Ichemco | Tackwhite A5 MED is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A5 MED is most commonly used pressure sensitive article production...view more Tackwhite A5 MED is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A5 MED is most commonly used pressure sensitive article production where high adhesion, water resistance, and cold resistance are required. view less | |
Tackwhite AMC 2 | Ichemco | Tackwhite AMC 2 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 41-43% as a Brookfield viscosity at 25°C of 50-250 mPa.s. Tackwhite AMC 2 is most commonly used in removable and replaceable paper and film la...view more Tackwhite AMC 2 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 41-43% as a Brookfield viscosity at 25°C of 50-250 mPa.s. Tackwhite AMC 2 is most commonly used in removable and replaceable paper and film label production applications. view less | |
Tackwhite AMC 21 | Ichemco | Tackwhite AMC 21 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 44-46%. Tackwhite AMC 21 is most commonly used in removable and repositionable polypropylene label and film production applications. | |
Tackwhite AMC 23 | Ichemco | Tackwhite AMC 23 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 37-39% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Tackwhite AMC 23 is most commonly used in removable and repositionable pol...view more Tackwhite AMC 23 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 37-39% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Tackwhite AMC 23 is most commonly used in removable and repositionable polypropylene label and film production applications. view less | |
Tackwhite AMC 3 D | Ichemco | Tackwhite AMC 3 D is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 40-42%, a tack of 10-20 cm, and a peel of 150-250 g/in. Tackwhite AMC 3 D is most commonly used in removable and repositionable PVC label ...view more Tackwhite AMC 3 D is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 40-42%, a tack of 10-20 cm, and a peel of 150-250 g/in. Tackwhite AMC 3 D is most commonly used in removable and repositionable PVC label production applications. view less | |
Tackwhite AMC 3 DS | Ichemco | Tackwhite AMC 3 DS is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 39-41% as a Brookfield viscosity at 25°C of 800-1000 mPa.s. Tackwhite AMC 3 DS is most commonly used in removable and replaceable PVC label...view more Tackwhite AMC 3 DS is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 39-41% as a Brookfield viscosity at 25°C of 800-1000 mPa.s. Tackwhite AMC 3 DS is most commonly used in removable and replaceable PVC label production applications. view less | |
Tackwhite AMC 4 D | Ichemco | Tackwhite AMC 4 D is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 46-48% as a Brookfield viscosity at 25°C of 500-1000 mPa.s. Tackwhite AMC 4 D is most commonly used in removable and replaceable PVC label p...view more Tackwhite AMC 4 D is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 46-48% as a Brookfield viscosity at 25°C of 500-1000 mPa.s. Tackwhite AMC 4 D is most commonly used in removable and replaceable PVC label production applications. view less | |
Tackwhite AP 03 HP | Ichemco | Tackwhite AP 03 HP is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 6-12 cm, and a peel of 1300-1600 g/in. Tackwhite AP 03 HP is most commonly used in protective polyethylene film productio...view more Tackwhite AP 03 HP is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 6-12 cm, and a peel of 1300-1600 g/in. Tackwhite AP 03 HP is most commonly used in protective polyethylene film production applications. view less | |
Tackwhite AP 15 | Ichemco | Tackwhite AP 15 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 45-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 is most commonly used in protective polyethylene film production appli...view more Tackwhite AP 15 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 45-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 is most commonly used in protective polyethylene film production applications. view less | |
Tackwhite AP 15 M | Ichemco | Tackwhite AP 15 M is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 43-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 M is most commonly used in protective polyethylene film production a...view more Tackwhite AP 15 M is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 43-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 M is most commonly used in protective polyethylene film production applications. view less | |
Tackwhite AP 5 | Ichemco | Tackwhite AP 5 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 8 cm, and a peel of 180 g/in. Tackwhite AP 5 is most commonly used in the production of removable PSA tapes with low peel adh...view more Tackwhite AP 5 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 8 cm, and a peel of 180 g/in. Tackwhite AP 5 is most commonly used in the production of removable PSA tapes with low peel adhesion. view less | |
Tackwhite AP 5 M | Ichemco | Tackwhite AP 5 M is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50%, a tack of 6-10 cm, and a peel of 300-600 g/in. Tackwhite AP 5 M is most commonly used in food-grade removable label and removable PSA...view more Tackwhite AP 5 M is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50%, a tack of 6-10 cm, and a peel of 300-600 g/in. Tackwhite AP 5 M is most commonly used in food-grade removable label and removable PSA tape with low peel adhesion production applications. view less | |
Tackwhite AR 35 | Ichemco | Tackwhite AR 35 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 51-53% as a Brookfield viscosity at 25°C of 200-300 mPa.s. Tackwhite AR 35 is most commonly used in removable PVC, PE, and BOPP label producti...view more Tackwhite AR 35 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 51-53% as a Brookfield viscosity at 25°C of 200-300 mPa.s. Tackwhite AR 35 is most commonly used in removable PVC, PE, and BOPP label production applications. view less | |
Tackwhite AR 51 (V2) | Ichemco | Tackwhite AR 51 (V2) is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite AR 51 (V2) is most commonly used in removable plastic and pape...view more Tackwhite AR 51 (V2) is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite AR 51 (V2) is most commonly used in removable plastic and paper label production applications. view less | |
Tackwhite CR 72 HV | Ichemco | Tackwhite CR 72 HV is a low Tg (-58°C) pure Acrylic polymer emulsion that forms clear, elastic, tacky films when dried. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 18,000-25,000. Tackwhite CR 72 HV is most com...view more Tackwhite CR 72 HV is a low Tg (-58°C) pure Acrylic polymer emulsion that forms clear, elastic, tacky films when dried. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 18,000-25,000. Tackwhite CR 72 HV is most commonly used in the production of pressure sensitive adhesives made for deep freeze applications. view less | |
Tackwhite HT 200 NC | Ichemco | Tackwhite HT 200 NC is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 7 cm, and a peel of 700 g/in. Tackwhite HT 200 NC is most commonly used in double-sided tape and tape applications where...view more Tackwhite HT 200 NC is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 7 cm, and a peel of 700 g/in. Tackwhite HT 200 NC is most commonly used in double-sided tape and tape applications where the tape must be removed without adhesive transfer on the contact surface. view less | |
Tackwhite NA 1 | Ichemco | Tackwhite NA 1 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite NA 1 is most commonly used as a protective material for plastic sheet, de...view more Tackwhite NA 1 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite NA 1 is most commonly used as a protective material for plastic sheet, decorative laminate, and ceramic applications. view less | |
Tackwhite NA 1 (V1) | Ichemco | Tackwhite NA 1 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite NA 1 (V1) is most commonly used as a protective material for p...view more Tackwhite NA 1 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite NA 1 (V1) is most commonly used as a protective material for plastic sheet, decorative laminate, and ceramic applications. view less | |
Tackwhite NA 1 (V2) | Ichemco | Tackwhite NA 1 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite NA 1 (V2) is most commonly used as a protective material for p...view more Tackwhite NA 1 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite NA 1 (V2) is most commonly used as a protective material for plastic sheet, decorative laminate, and ceramic applications. view less | |
Tackwhite NA 1/V | Ichemco | Tackwhite NA 1/V is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 900-1900 mPa.s. Tackwhite NA 1/V is most commonly used as a protective material for plastic shee...view more Tackwhite NA 1/V is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 900-1900 mPa.s. Tackwhite NA 1/V is most commonly used as a protective material for plastic sheet, decorative laminate, and ceramic applications. view less | |
Tackwhite NA 55 | Ichemco | Tackwhite NA 55 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% as a Brookfield viscosity at 25°C of less than 500 mPa.s. Tackwhite NA 55 is most commonly used in protective polyethylene film product...view more Tackwhite NA 55 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% as a Brookfield viscosity at 25°C of less than 500 mPa.s. Tackwhite NA 55 is most commonly used in protective polyethylene film production applications. view less |