| Ancorante PVC | Ichemco | Ancorante PVC is an additive for PVC adhesive tape printing inks. This product is most commonly used to improve ink transfer properties to the adhesive side of PVC tapes. | |
| Antiox 2246 | Ichemco | Antiox 2246 is a phenolic antioxidant. This product has a melting range of greater than 125°C. Antiox 2246 is most commonly used as an antioxidant in solvent-based adhesive applications. | |
| Antiox AHM | Ichemco | Antiox AHM is a blend of primary phenolic, thio-ester, and phosphite antioxidants. This product has a total solids content of 98-100% and a melting range of 110-140°C. Antiox AHM is most commonly used as an antioxidant in pressure sensitive adhesive and c...view more Antiox AHM is a blend of primary phenolic, thio-ester, and phosphite antioxidants. This product has a total solids content of 98-100% and a melting range of 110-140°C. Antiox AHM is most commonly used as an antioxidant in pressure sensitive adhesive and coating applications. view less | |
| Antiox AHM-EC Pellets | Ichemco | Antiox AHM-EC Pellets are a blend of four non-staining antioxidants. This product has a total solids content of 98-100%. Antiox AHM-EC Pellets are most commonly used as a UV protector in pressure sensitive adhesive and coating applications. | |
| Antiox LX | Ichemco | Antiox LX is a blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a Brookfield viscosity at 25°C of 50-200 mPa.s. Antiox LX is most commonly used as an antioxidant in natural r...view more Antiox LX is a blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a Brookfield viscosity at 25°C of 50-200 mPa.s. Antiox LX is most commonly used as an antioxidant in natural rubber, SBR, and resin adhesive applications. view less | |
| Antischiuma FL5 | Ichemco | Antischiuma FL5 is a VOC-free, organic defoamer. This product has a Brookfield viscosity at 25°C of 200-500 mPa.s. Antischiuma FL5 is most commonly used as a defoaming agent in water-based adhesive production applications. | |
| Curing Agent AQ 40 | Ichemco | Curing Agent AQ 40 is an aqueous dispersion of an isocyanate dimer. This product is recommended for the crosslinking of acrylic and polyurethane dispersions in a wide range of applications: adhesives, stickers, P.S.A. and for many more applications like ...view more Curing Agent AQ 40 is an aqueous dispersion of an isocyanate dimer. This product is recommended for the crosslinking of acrylic and polyurethane dispersions in a wide range of applications: adhesives, stickers, P.S.A. and for many more applications like protective films, binders for the leather finishing and coatings. view less | |
| Curing Agent ASB | Ichemco | Curing Agent ASB is a metallorganic compound solution. This product has a total solids content of 5.5-6.5%. Curing Agent ASB is most commonly used as a curing and cross-linking agent in solvent-based acrylic adhesive applications. | |
| Curing Agent D | Ichemco | Curing Agent D is a diisocyanate in a liquid solution form. This product has a total solids content of 64-66%. Curing Agent D is most commonly used as a curing and cross-linking agent in coating, adhesive, primer, and paint applications. | |
| Curing Agent MDI | Ichemco | Curing Agent MDI is a polyisocyanate in a liquid form. This product is most commonly used as a curing and cross-linking agent in solvent-based primer and adhesive applications. | |
| Curing Agent RF/AE | Ichemco | Curing Agent RF/AE is a polyisocyanate in a liquid solution form. This product has a total solids content of 25-29%. Curing Agent RF/AE is most commonly used in two-component primer and pressure sensitive adhesive applications. | |
| Curing agent RF/AE DE | Ichemco | Curing agent RF/AE DE is a polyisocyanate in a liquid solution form. This product has a total solids content of 25-27%. Curing agent RF/AE DE is most commonly used in two-component primer and pressure sensitive adhesive applications. | |
| Curing Agent V3 | Ichemco | Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive ancho...view more Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. view less | |
| Curing Agent V4 | Ichemco | Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage t...view more Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. view less | |
| Curing Agent W 9 | Ichemco | Curing Agent W 9 is a liquid polyisocyanate. This product has a total solids content of 79-81%. Curing Agent W 9 is most commonly used as a curing and cross-linking agent in water-based adhesive, varnish, and lacquer applications. | |
| Curing Agent W3 | Ichemco | Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather fi...view more Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather finishing applications. view less | |
| Curing Agent W3 DIL | Ichemco | Curing Agent W3 DIL is a water-dispersable polyisocyanate. This product has a total solids content of 69-71%. Curing Agent W3 DIL is most commonly used as a curing and cross-linking agent in adhesive, paint, and lacquer applications. | |
| Defoamer FL 1 Conc. | Ichemco | Defoamer FL 1 Conc. is a non-siliconic, organic defoamer. This product has a Brookfield viscosity at 25°C of 500-1500 mPa.s. Defoamer FL 1 Conc. is most commonly used as a defoaming agent in water-based paint, plaster, and adhesive emulsion applications. | |
| Defoamer FL 9 | Ichemco | Defoamer FL 9 is a defoaming emulsion based on organo-modified siloxanes. This product has a total solids content of 24-28% and a Brookfield viscosity at 25°C of 220-620 mPa.s. Defoamer FL 9 is most commonly used as a defoaming agent in pressure sensitive...view more Defoamer FL 9 is a defoaming emulsion based on organo-modified siloxanes. This product has a total solids content of 24-28% and a Brookfield viscosity at 25°C of 220-620 mPa.s. Defoamer FL 9 is most commonly used as a defoaming agent in pressure sensitive adhesive applications. view less | |
| Diluente C Nitro | Ichemco | Diluente C Nitro is an ink thinner. This product is most commonly used as a thinner in Color Ink PP Nitro applications. | |
| Disper AC 8 | Ichemco | Disper AC 8 is a water-based solution of polyacrylate. This product has a total solids content of 40-42% and a Brookfield viscosity at 25°C of 200-500 cPs. Disper AC 8 is most commonly used as a dispersing agent for fillers and pigments in water-based p...view more Disper AC 8 is a water-based solution of polyacrylate. This product has a total solids content of 40-42% and a Brookfield viscosity at 25°C of 200-500 cPs. Disper AC 8 is most commonly used as a dispersing agent for fillers and pigments in water-based paint applications. view less | |
| Flameretarder GO | Ichemco | Flameretarder GO is a halogen-based flame retardant water dispersion. This product has a total solids content of 68-71% and a Brookfield viscosity at 25°C of 7000-11,000 cPs. Flameretarder GO is most commonly used as a flame resistant coating in fabric,...view more Flameretarder GO is a halogen-based flame retardant water dispersion. This product has a total solids content of 68-71% and a Brookfield viscosity at 25°C of 7000-11,000 cPs. Flameretarder GO is most commonly used as a flame resistant coating in fabric, fiber, and non-woven applications. view less | |
| Flameretarder HWF | Ichemco | Flameretarder HWF is a halogen-free, formadehyde-free, nitrogen-based flame retardant. This product has a total solids content of 44-48% and a Brookfield viscosity at 25°C of 10-50 cPs. Flameretarder HWF is most commonly used as a flame resistant coatin...view more Flameretarder HWF is a halogen-free, formadehyde-free, nitrogen-based flame retardant. This product has a total solids content of 44-48% and a Brookfield viscosity at 25°C of 10-50 cPs. Flameretarder HWF is most commonly used as a flame resistant coating in natural fiber applications. view less | |
| Release FL7 | Ichemco | Release FL7 is a solvent-based release agent. This product has a total solids content of 29-31% and a Ford Cup viscosity of 20-24 seconds. Release FL7 is most commonly used as a release agent in paper and corona-treated printed PP and PE film coating ap...view more Release FL7 is a solvent-based release agent. This product has a total solids content of 29-31% and a Ford Cup viscosity of 20-24 seconds. Release FL7 is most commonly used as a release agent in paper and corona-treated printed PP and PE film coating applications. view less | |
| Release FR 100 | Ichemco | Release FR 100 is a vegetable oil, release agent, and polyamidic resin-based compound. This product has a total solids content of 98-100%. Release FR 100 is most commonly used in PS adhesive tape and film productions applications. | |
| Release FR 100 V | Ichemco | Release FR 100 V is a release agent. This product has a total solids content of 99-100%. Release FR 100 V is most commonly used in PE and aluminum tape production applications. | |
| Release FR 2 AB | Ichemco | Release FR 2 AB is a vegetable oil, release agent, and polyamidic resin-based compound in a hydrocarbon solvent solution. This product has a total solids content of 4.5-5.5%. Release FR 2 AB is most commonly used as a release agent in PS adhesive tape a...view more Release FR 2 AB is a vegetable oil, release agent, and polyamidic resin-based compound in a hydrocarbon solvent solution. This product has a total solids content of 4.5-5.5%. Release FR 2 AB is most commonly used as a release agent in PS adhesive tape and film production applications. view less | |
| Release FR 5 C | Ichemco | Release FR 5 C is an additive and release agent-based compound in a toluene solution. This product has a total solids content of 4-6%. Release FR 5 C is most commonly used as a release agent in PS adhesive tape and film production applications. | |
| Release K 100 D | Ichemco | Release K 100 D is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 85-95°C. Release K 100 D is most commonly used as a release agent in corona and non corona-treated film coating ...view more Release K 100 D is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 85-95°C. Release K 100 D is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Release K 100 D DIL.2 | Ichemco | Release K 100 D DIL.2 is a polyvinylcarbonate release agent in a toluene solvent solution. This product has a total solids content of 1.8-2.2%. Release K 100 D DIL.2 is most commonly used in adhesive tape production applications. | |
| Release K 100 DI | Ichemco | Release K 100 DI is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 78-90°C. Release K 100 DI is most commonly used as a release agent in corona and non corona-treated film coatin...view more Release K 100 DI is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 78-90°C. Release K 100 DI is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Release K 100 DI DIL. 1 ECO | Ichemco | Release K 100 DI DIL. 1 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 0.9-1.1%. Release K 100 DI DIL. 1 ECO is most commonly used as a release agent in adhesive...view more Release K 100 DI DIL. 1 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 0.9-1.1%. Release K 100 DI DIL. 1 ECO is most commonly used as a release agent in adhesive tape production applications. view less | |
| Release K 100 DI DIL. 1.5 ECO | Ichemco | Release K 100 DI DIL. 1.5 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 1.4-1.6%. Release K 100 DI DIL. 1.5 ECO is most commonly used as a release agent in adhe...view more Release K 100 DI DIL. 1.5 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 1.4-1.6%. Release K 100 DI DIL. 1.5 ECO is most commonly used as a release agent in adhesive tape production applications. view less | |
| Release K 100 DM | Ichemco | Release K 100 DM is a polyvinylcarbamate is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 75-85°C. Release K 100 DM is most commonly used as a release agent in acrylic adhesive, as...view more Release K 100 DM is a polyvinylcarbamate is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 75-85°C. Release K 100 DM is most commonly used as a release agent in acrylic adhesive, as well as corona and non corona-treated film coating applications. view less | |
| Release K 100 E | Ichemco | Release K 100 E is a release agent . This product has a total solids content of 98-100% and a melting range 90-96°C. Release K 100 E is most commonly used as a release agent in PE and PP film coating applications. | |
| Release K 100 ES | Ichemco | Release K 100 ES is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 90-96°C. Release K 100 ES is most commonly used as a release agent in corona and non corona-treated film coating a...view more Release K 100 ES is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 90-96°C. Release K 100 ES is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Release K 100 H | Ichemco | Release K 100 H is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 94-104°C. Release K 100 H is most commonly used as a release agent in corona and non corona-treated film coating ap...view more Release K 100 H is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 94-104°C. Release K 100 H is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Release Master K20 E PP | Ichemco | Release Master K20 E PP is a modified polycondensed polymer in a xylene solvent solution. This product has a total solids content of 24-26%. Release Master K20 E PP is most commonly used as a release agent in low-noise OPP adhesive tape printing applicati...view more Release Master K20 E PP is a modified polycondensed polymer in a xylene solvent solution. This product has a total solids content of 24-26%. Release Master K20 E PP is most commonly used as a release agent in low-noise OPP adhesive tape printing applications. view less | |
| Release PP 100 | Ichemco | Release PP 100 is a synthetic polymer. This product has a total solids content of 98-100% and a melting point of 83-93°C. Release PP 100 is most commonly used as a release agent in low-noise OPP adhesive tape printing applications. | |
| Release PP 25 | Ichemco | Release PP 25 is a synthetic polymer in a solvent solution. This product has a total solids content of 22-24% and a melting range of 90-115°C. Release PP 25 is most commonly used as a release agent in adhesive tape printing applications. | |
| Release PP 25 DIL | Ichemco | Release PP 25 DIL is a polyurethane release agent in a solvent solution. This product has a total solids content of 0.41-0.51%. Release PP 25 DIL is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 0.35 | Ichemco | Release PP 25 DIL. 0.35 is a polyurethane release agent in a solvent solution. This product has a total solids content of 0.3-0.4%. Release PP 25 DIL. 0.35 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 0.6 | Ichemco | Release PP 25 DIL. 0.6 is a polyurethane release agent in a solvent solution. This product has a total solids content of 0.55-0.65%. Release PP 25 DIL. 0.6 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 0.8 | Ichemco | Release PP 25 DIL. 0.8 is a polyurethane release agent in a solvent solution. This product has a total solids content of 0.75-0.85%. Release PP 25 DIL. 0.8 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL 1.5 | Ichemco | Release PP 25 DIL 1.5 is a polyurethane release agent in a solvent solution. This product has a total solids content of 1.4-1.6%. Release PP 25 DIL 1.5 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 2 | Ichemco | Release PP 25 DIL. 2 is a polyurethane release agent in a solvent solution. This product has a total solids content of 1.8-2.2%. Release PP 25 DIL. 2 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL 2.5 | Ichemco | Release PP 25 DIL 2.5 is a polyurethane release agent in a solvent solution. This product has a total solids content of 2.3-2.7%. Release PP 25 DIL 2.5 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 3 | Ichemco | Release PP 25 DIL. 3 is a polyurethane release agent in a solvent solution. This product has a total solids content of 2.8-3.2%. Release PP 25 DIL. 3 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release W 30 HS4 | Ichemco | Release W 30 HS4 is a water based release agent based on synthetic SBR polymers added with hydrophobic and releasing agents. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 30 HS4 is most ...view more Release W 30 HS4 is a water based release agent based on synthetic SBR polymers added with hydrophobic and releasing agents. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 30 HS4 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 40 G2 | Ichemco | Release W 40 G2 is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 150-450 mPa.s. Release W 40 G2 is most commonly used as a release agent in hot-melt and solventborne adhesive applicati...view more Release W 40 G2 is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 150-450 mPa.s. Release W 40 G2 is most commonly used as a release agent in hot-melt and solventborne adhesive applications. view less | |
| Release W 40 GB4 LV | Ichemco | Release W 40 GB4 LV is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 30-100 mPa.s. Release W 40 GB4 LV is most commonly used as a release agent in hot-melt adhesive and porous substrat...view more Release W 40 GB4 LV is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 30-100 mPa.s. Release W 40 GB4 LV is most commonly used as a release agent in hot-melt adhesive and porous substrate coating applications. view less | |
| Release W 40 GP1 | Ichemco | Release W 40 GP1 is a water-based product based on acrylic dispersions. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Release W 40 GP1 is most commonly used as a printable release coat in paper ap...view more Release W 40 GP1 is a water-based product based on acrylic dispersions. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Release W 40 GP1 is most commonly used as a printable release coat in paper applications. view less | |
| Release W 40 HA 5 | Ichemco | Release W 40 HA 5 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 5 is most common...view more Release W 40 HA 5 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 5 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 40 HA 6 | Ichemco | Release W 40 HA 6 is a water-based release agent based on synthetic acrylic polymers. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 6 is most commonly used as a release agent in poro...view more Release W 40 HA 6 is a water-based release agent based on synthetic acrylic polymers. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 6 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 40 HA 8 | Ichemco | Release W 40 HA 8 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 600-1200 mPa.s. Release W 40 HA 8 is most commo...view more Release W 40 HA 8 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 600-1200 mPa.s. Release W 40 HA 8 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 40 HS 4 | Ichemco | Release W 40 HS 4 is a water-based release agent based on synthetic SBR polymers with a high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W 40 HS 4 is most commonly used ...view more Release W 40 HS 4 is a water-based release agent based on synthetic SBR polymers with a high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W 40 HS 4 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 40 S | Ichemco | Release W 40 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Release W 40 S is most commonly used as a release agent in porous subst...view more Release W 40 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Release W 40 S is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 45 GB 1 | Ichemco | Release W 45 GB 1 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Release W 45 GB 1 is most commonly used as a release agent in p...view more Release W 45 GB 1 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Release W 45 GB 1 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 45 GB 15 | Ichemco | Release W 45 GB 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GB 15 is most commonly used as a release agent in hot-me...view more Release W 45 GB 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GB 15 is most commonly used as a release agent in hot-melt and solventborne adhesive applications. view less | |
| Release W 45 GB 5 | Ichemco | Release W 45 GB 5 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 45 GB 5 is most commonly used as a controlled release agent in ho...view more Release W 45 GB 5 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 45 GB 5 is most commonly used as a controlled release agent in hot-melt adhesive applications. view less | |
| Release W 45 GS 15 | Ichemco | Release W 45 GS 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GS 15 is most commonly used as a release agent in hot-me...view more Release W 45 GS 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GS 15 is most commonly used as a release agent in hot-melt and solventborne adhesive applications. view less | |
| Release W 45 HS 4 | Ichemco | Release W 45 HS 4 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W 45 HS 4 is most commonly used as a release agent in porous substr...view more Release W 45 HS 4 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W 45 HS 4 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W20 G BV | Ichemco | Release W20 G BV is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 10-30 mPa.s. Release W20 G BV is most commonly used as a release agent in porous substrate c...view more Release W20 G BV is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 10-30 mPa.s. Release W20 G BV is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W20 GB1 | Ichemco | Release W20 GB1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 800-1300 mPa.s. Release W20 GB1 is most commonly used as a release coat in substrate coating ...view more Release W20 GB1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 800-1300 mPa.s. Release W20 GB1 is most commonly used as a release coat in substrate coating applications. view less | |
| Release W20 GP | Ichemco | Release W20 GP is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 1200-1600 mPa.s. Release W20 GP is most commonly used as a printable and writable release coat...view more Release W20 GP is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 1200-1600 mPa.s. Release W20 GP is most commonly used as a printable and writable release coat in paper applications. view less | |
| Release W20 GP1 | Ichemco | Release W20 GP1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Release W20 GP1 is most commonly used as a printable and writable release co...view more Release W20 GP1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Release W20 GP1 is most commonly used as a printable and writable release coat in paper applications. view less | |
| Release W20 HS4 | Ichemco | Release W20 HS4 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 900-1200 mPa.s. Release W20 HS4 is most commonly used as a release agent in porous subs...view more Release W20 HS4 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 900-1200 mPa.s. Release W20 HS4 is most commonly used as a release agent in porous substrate applications. view less | |
| Release W20 S | Ichemco | Release W20 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W20 S is most commonly used as a release agent in porous substrat...view more Release W20 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W20 S is most commonly used as a release agent in porous substrate applications. view less | |
| Release W22 WP | Ichemco | Release W22 WP is a non-silicone release agent. This product has a total solids content of 21.5-23.5% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W22 WP is most commonly used as a release agent in written and ink-jet printed paper coatin...view more Release W22 WP is a non-silicone release agent. This product has a total solids content of 21.5-23.5% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W22 WP is most commonly used as a release agent in written and ink-jet printed paper coating applications. view less | |
| Release W40 GB1 | Ichemco | Release W40 GB1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB1 is most commonly used as a release agent in hot-melt and so...view more Release W40 GB1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB1 is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. view less | |
| Release W40 GB1 LV | Ichemco | Release W40 GB1 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB1 LV is most commonly used as a release agent in hot-melt and s...view more Release W40 GB1 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB1 LV is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. view less | |
| Release W40 GB2 | Ichemco | Release W40 GB2 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH level of 8-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release Release W40 GB2 is most commonly used as a releas...view more Release W40 GB2 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH level of 8-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release Release W40 GB2 is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. view less | |
| Release W40 GB3 | Ichemco | Release W40 GB3 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 7-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB3 is most commonly used as a release agent in sub...view more Release W40 GB3 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 7-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB3 is most commonly used as a release agent in substrate coatings where contact with hot-melt and solvent-based adhesives is common. view less | |
| Release W40 GB6 LV | Ichemco | Release W40 GB6 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 8-9, and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB6 LV is most commonly used as a release agent in ...view more Release W40 GB6 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 8-9, and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB6 LV is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. view less | |
| Release WF 30 | Ichemco | Release WF 30 is a water-based release agent based on acrylic polymers. This product has a total solids content of 29-31%, a pH of 3-5, and a Brookfield viscosity at 25°C of 20-70 mPa.s. Release WF 30 is most commonly used as a release agent in technical ...view more Release WF 30 is a water-based release agent based on acrylic polymers. This product has a total solids content of 29-31%, a pH of 3-5, and a Brookfield viscosity at 25°C of 20-70 mPa.s. Release WF 30 is most commonly used as a release agent in technical tape applications. view less | |
| Resina R 35 | Ichemco | Resina R 35 is a natural rubber-based cyclized rubber. This product is most commonly used in food packaging ink formulation and high thermal and chemical resistant varnish production applications. | |
| Ritardante C Nitro | Ichemco | Ritardante C Nitro is a methoxy propanol solvent-based ink additive. This product is most commonly used to decrease drying time in applications using Color Ink PP Nitro. | |
| Ritardante C PAM | Ichemco | Ritardante C PAM is an isobutyl alcohol solvent-based ink additive. This product is most commonly used to decrease drying time in applications using Color Ink PP PAM+Add and Color Ink PP PAMC. | |
| Ritardante C PVC | Ichemco | Ritardante C PVC is a cyclohexanone solvent-based ink additive. This product is most commonly used to decrease drying time in applications using Color Ink PVC. | |
| Wetting Agent 62 | Ichemco | Wetting Agent 62 is a water and ethanol solution containing surfactants. This product is most commonly used to decrease blemishes such as fish-eyes in coating production applications. | |
| Wetting Agent IF | Ichemco | Wetting Agent IF is a high-efficiency anionic surfactant. This product is most commonly used to improve wettability in water-based coating system applications. |
