| A 135 | BIP (Oldbury) Ltd | A 135 is a non ionic polyethylene emulsion, in a low viscosity liquid. It is used primarily to improve tear strength and can be used on any fabric. | |
| A 154 | BIP (Oldbury) Ltd | A 154 is a modified dicyandiamide formaldehyde precondensate. It is a clear colourless cationic solution. It is primarily used to improve wet fastness of direct dyes. | |
| A 174 | BIP (Oldbury) Ltd | A 174 is a non re-wetting emulsifier. It is designed for use with water repellants and fluorochemical finishes. It an also be used as a foaming agent for use in foam finishing systems. | |
| A 199 | BIP (Oldbury) Ltd | A 199 is a permanent repellant for all fibre types. | |
| AC 108 | BIP (Oldbury) Ltd | AC 108 is a modified ammonium chloride catalyst. It is a neutral clear liquid solution with low reactivity. Primarily used as a catalyst for urea and melamine resins. | |
| AC 119 | BIP (Oldbury) Ltd | AC 119 is a modified magnesium chloride catalyst. In a highly reactivity, low PH clear solution. It has applications where high production speeds required. | |
| AC 178 | BIP (Oldbury) Ltd | AC 178 is a magnesium chloride catalyst. It has medium reactivity and is a clear solution. It is mainly used in medium cure catalyst having minimum effect on shade. | |
| AC 600 | BIP (Oldbury) Ltd | AC 600 is an amine salt of p-toluene sulphonic acid in isopropanol. It is a highly reactive, clear solution. Primarily recommended for use in curing HMMM resin PT 370. | |
| Ash Quartz | Boud Minerals & Polymers | Ash Quartz is a light grey colored, rounded quartz that has been washed, dried and graded. This product is used in decorative and other resin bound systems as well as based substrate for light colored pigmentation. | |
| BCP | BIP (Oldbury) Ltd | BCP is a blend of waterbased synthetic polymers. Primarily used as a coating on fabric to prevent wrinkles. It can be used in conjunction with PT 939C or A 135 and can be used for single pass systems. | |
| BEETLE® PT312 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise wate...view more PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT312 will also increase the efficiency of the OBA used, particularly in all latex formulations. view less | |
| BEETLE® PT336 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders...view more PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT336 will also increase the efficiency of the OBA used, particularly in all latex formulations. view less | |
| BEETLE® PT355 - Wet Strength Resin | BIP (Oldbury) Ltd | PT355 is a chlorine-free, zero AOX, highly reactive and efficient methylated melamine formaldehyde resin. PT355 colloid is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envel...view more PT355 is a chlorine-free, zero AOX, highly reactive and efficient methylated melamine formaldehyde resin. PT355 colloid is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes, sack-krafts, laundry tags, tea-bag tissue, and label papers. When used under optimum conditions of pH (4.5 - 6.5) and heat input, the resin will also improve basic sheet dry strength. An added benefit is that PT355 colloid will enhance the performance of rosin sizing agents. view less | |
| BEETLE® PT746 - Neutral Cure Wet Strength Resin | BIP (Oldbury) Ltd | PT746 is a cationic, low AOX/DCP polyamide epichlorohydrin resin. Though specifically designed for the production of wet strengthened papers by wet-end application to the paper machine, the special characteristics of BEETLE resin PT746 yields a versatile,...view more PT746 is a cationic, low AOX/DCP polyamide epichlorohydrin resin. Though specifically designed for the production of wet strengthened papers by wet-end application to the paper machine, the special characteristics of BEETLE resin PT746 yields a versatile, multifunctional product, useful in other applications and areas of the paper-making process. PT746 is used to impart wet strength in the production of a wide variety of papers based upon all cellulosic or all synthetic furnishes, or blends of both fibre types, when used under neutral to alkaline conditions. Higher dry strength often results from the use of PT746, particularly where high or all synthetic fibre furnishes are involved. view less | |
| BEETLE® PT789 - Wet Strength Resin | BIP (Oldbury) Ltd | PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack...view more PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack-krafts, when such products are made at pH levels below neutral. Since PT789 is a melamine resin, it is particularly suited to the production of higher quality, more demanding paper products such as hot-filters, laundry-tag, currency, security and bottle label papers. view less | |
| Brown Aluminium Oxide | Boud Minerals & Polymers | Brown Aluminium Oxide is a hard, angular mineral for use in anti-slip and abrasive systems when the mineral do not have a transparent or light color requirement. This product can be used in paints and coatings as it contains a low oil absorbency and a ph...view more Brown Aluminium Oxide is a hard, angular mineral for use in anti-slip and abrasive systems when the mineral do not have a transparent or light color requirement. This product can be used in paints and coatings as it contains a low oil absorbency and a physical key between the particle and binder. view less | |
| Calcined Bauxite | Boud Minerals & Polymers | Calcined Bauxite is naturally a very hard mineral that makes it desirable for internal and external industrial flooring applications due to its durability and high-friction, anti-slip attributes. This product is available in a range of colors and sizes an...view more Calcined Bauxite is naturally a very hard mineral that makes it desirable for internal and external industrial flooring applications due to its durability and high-friction, anti-slip attributes. This product is available in a range of colors and sizes and is also used for decorative surfaces and public roads for pedestrian crossing installations. view less | |
| Calcined Flint | Boud Minerals & Polymers | Calcined Flint is an acid insoluble filler/aggregate derived from calcining grey flints. This product is used to give a decorative white fleck and increase wearing properties of polyurethane screeds that require good and chemical and heat resistance. It ...view more Calcined Flint is an acid insoluble filler/aggregate derived from calcining grey flints. This product is used to give a decorative white fleck and increase wearing properties of polyurethane screeds that require good and chemical and heat resistance. It is also used in epoxy sand screeds for a decorative finish. view less | |
| Clear Crushed Glass | Boud Minerals & Polymers | Clear Crushed Glass is an inert filler material used to give a decorative finish to external resin bound, internal and external resin bonded and terrazzo flooring systems. This product provides the benefits of low oil absorbency that reduces required res...view more Clear Crushed Glass is an inert filler material used to give a decorative finish to external resin bound, internal and external resin bonded and terrazzo flooring systems. This product provides the benefits of low oil absorbency that reduces required resin amounts in fillers. view less | |
| Crushed Flint | Boud Minerals & Polymers | Crushed Flint is blue flint that has been crushed to give an angular surface and can be used as a general mineral filler as an alternative to quartz or silica sand. The product appears grey in color and has a glass texture. | |
| DKI Quartz | Boud Minerals & Polymers | DKI Quartz is a light coloured naturally round quartz sand that has been washed, dried and graded. This product forms the main component for many dry and screed blends and is available in a variety of sizes. It is processed to meet continental grade speci...view more DKI Quartz is a light coloured naturally round quartz sand that has been washed, dried and graded. This product forms the main component for many dry and screed blends and is available in a variety of sizes. It is processed to meet continental grade specifications which has importance where a system specifies a particle grading. view less | |
| DKI Quartz Flour 74/200 | Boud Minerals & Polymers | DKI Quartz Flour 74/200 is a ground crystalline quartz used as a general filler in resin systems. This product is available in different sizes and can be incorporated into bespoke formulations or distributed as a standalone product. | |
| Dry Liquid 698 | Boud Minerals & Polymers | Dry Liquid 698 is a dry liquid which is a converted difficult-to-handle disperse liquid formed into a high active content powder. This product is 70% Quin Guard Etoxyquin and 30% Precipitated Silica and is supplied in a powder form to enable it to be more...view more Dry Liquid 698 is a dry liquid which is a converted difficult-to-handle disperse liquid formed into a high active content powder. This product is 70% Quin Guard Etoxyquin and 30% Precipitated Silica and is supplied in a powder form to enable it to be more easily handled and dispersed. view less | |
| Dry Liquid DR41 | Boud Minerals & Polymers | Dry Liquid DR41 is a dry liquid which is a converted difficult-to-handle disperse liquid formed into a high active content powder. This product is 70% Lithene AH and 30% Precipitated Silica and is supplied in a white powder form to enable it to be more ea...view more Dry Liquid DR41 is a dry liquid which is a converted difficult-to-handle disperse liquid formed into a high active content powder. This product is 70% Lithene AH and 30% Precipitated Silica and is supplied in a white powder form to enable it to be more easily handled and dispersed. view less | |
| Dry Liquid P-027 | Boud Minerals & Polymers | Dry Liquid P-027 is a dry liquid which is a converted difficult-to-handle disperse liquid formed into a high active content powder. This product is 70% Paraplex G25 and 30% Precipitated Silica and is supplied in a powder form to enable it to be more easil...view more Dry Liquid P-027 is a dry liquid which is a converted difficult-to-handle disperse liquid formed into a high active content powder. This product is 70% Paraplex G25 and 30% Precipitated Silica and is supplied in a powder form to enable it to be more easily handled and dispersed. view less | |
| Emery | Boud Minerals & Polymers | Emery is a hard, natural mineral processed for non-slip and anti-skid systems where high-friction is required including bridge decks, roads, rail platforms, footbridges, industrial flooring, car park ramps, ferry port linkspans, ship ramps, helipads and o...view more Emery is a hard, natural mineral processed for non-slip and anti-skid systems where high-friction is required including bridge decks, roads, rail platforms, footbridges, industrial flooring, car park ramps, ferry port linkspans, ship ramps, helipads and offshore walkways. This product is available in several sizes. view less | |
| Feldspar | Boud Minerals & Polymers | Feldspar is a milled, crystalline anhydrous sodium potassium aluminum silicate. This product as white nodular-shaped crystalline structure with a dry brightness, hardness and heat stability that is inert and easy to disperse. It is primarily used as a fil...view more Feldspar is a milled, crystalline anhydrous sodium potassium aluminum silicate. This product as white nodular-shaped crystalline structure with a dry brightness, hardness and heat stability that is inert and easy to disperse. It is primarily used as a filler in floor screeds, paints, polymers, adhesives and polishes. view less | |
| Marble Bianco Carrara | Boud Minerals & Polymers | Marble Bianco Carrara is a traditional white marble used most commonly for resin terrazzo systems, resin, bound/bonded systems and general decorative resins. It comes in different sizes and powder, coarse and fine chipping forms. | |
| Micro Ballast Crushed Granite | Boud Minerals & Polymers | Micro Ballast Crushed Granite is a range of crushed granite that has been dried and dedusted. This product has a natural look in range of colors and can be pigmented for anti-slip road and pedestrian traffic environments. | |
| Pigment Masterbatch (Roads) | Boud Minerals & Polymers | Pigment Masterbatch (Roads) is a pigment produced in pellet form to assist the colouring of roads such as cycle lanes, stopping areas, parking areas and roundabout approaches. These pellets can be poured or screwed into a bitumen mixture to enable easier ...view more Pigment Masterbatch (Roads) is a pigment produced in pellet form to assist the colouring of roads such as cycle lanes, stopping areas, parking areas and roundabout approaches. These pellets can be poured or screwed into a bitumen mixture to enable easier colour application process. It is also pre-dispered meaning much less of the pigment is necessary for a colour yield. view less | |
| Pigmented Bauxite | Boud Minerals & Polymers | Pigmented Bauxite is a natural hard mineral or calcined bauxite coated with polyurethane resin used for visibility of safety colours and anti-slip, anti-skid decorative surfaces. It is commonly applied to warehouse floors, loading areas and highly visibil...view more Pigmented Bauxite is a natural hard mineral or calcined bauxite coated with polyurethane resin used for visibility of safety colours and anti-slip, anti-skid decorative surfaces. It is commonly applied to warehouse floors, loading areas and highly visibility pedestrian and vehicle safety areas. view less | |
| Pigmented Quartz | Boud Minerals & Polymers | Pigmented Quartz are quartz sands and gravels that are colour-coated with a polyurethane resin. This product is commonly used with a colour background binder and gives many colour variation options in a resin coating system. | |
| Pigmented Quartz Blends | Boud Minerals & Polymers | Pigmented Quartz Blends are quartz sands and gravels that are colour-coated with polyurethane resin. This product comes in a variety of colour mixes for use in resin coating systems. | |
| PT 312 | BIP (Oldbury) Ltd | PT 312 is a methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening of all fibre types. It has a low free formaldehyde version PT 338. | |
| PT 322 | BIP (Oldbury) Ltd | PT 322 is a modified urea resin. Primarily used in the production of economic fabric stiffeners. | |
| PT 336 | BIP (Oldbury) Ltd | PT 336 Methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening and binding of all fibre types. This product exhibits medium to high reactivity. | |
| PT 338 | BIP (Oldbury) Ltd | PT 338 is a methylated melamine resin. Primarily used as a resin for stiffening of all fabric types. | |
| PT 350 | BIP (Oldbury) Ltd | PT 350 is a modified reactant resin. Primarily used as a cross Linking Resins for Acrylic Pastes and coatings and use as fabric stiffeners or binders. It combines easy care with additive fixation. | |
| PT 368 | BIP (Oldbury) Ltd | PT 368 is a modified methylated melamine resin. It can be used to create a cost effective stiffening agent and binder. | |
| PT 370 | BIP (Oldbury) Ltd | PT 370 is a fully methylated HMMM resin. It is primarily used as a cross linking agent for synthetic, natural rubber latex and PUD's, chlorine resist finish and bonding of non woven material. | |
| PT 3745 | BIP (Oldbury) Ltd | PT 3745 is a fully methylated HMMM resin. Primarily used as a cross linking agent for synthetic, natural rubber latex and PUD's, chlorine resist finish and bonding of non woven material. | |
| PT 726 | BIP (Oldbury) Ltd | PT 726 is a modified polymer of ethylene urea. It is a non-ionic, clear to pale yellow, formaldehyde free liquid. Primarily used for crease resistant finishes on cellulose fiber fabrics when formaldehyde free product and requires no special catalyst. | |
| PT 727 | BIP (Oldbury) Ltd | PT 727 is a modified urea formaldehyde polymer. It is a clear, straw coloured cationic liquid. Primarily used for anchoring thermoplastic coatings to regenerated cellulose film. | |
| PT 729 | BIP (Oldbury) Ltd | PT 729 is an oligomer of dimethylol cyclic ethylene urea. It is a non-ionic reactant resin. Primarily used as a soft crease resistant and mechanical finishes for cellulosic fibres, woven and knitted goods, can also be used for white goods where chlorine r...view more PT 729 is an oligomer of dimethylol cyclic ethylene urea. It is a non-ionic reactant resin. Primarily used as a soft crease resistant and mechanical finishes for cellulosic fibres, woven and knitted goods, can also be used for white goods where chlorine retention is of no importance. view less | |
| PT 931 | BIP (Oldbury) Ltd | PT 931 is a dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde clear solution that is primarily used as a crease resistant and permanent press finish for fabrics containing cellulosic/synthetic fibre blends. Th...view more PT 931 is a dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde clear solution that is primarily used as a crease resistant and permanent press finish for fabrics containing cellulosic/synthetic fibre blends. This product gives improved chlorine resistance and very low residual formaldehyde. view less | |
| PT 933 | BIP (Oldbury) Ltd | PT 933 is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. Primarily used as a suitable for crease resistant finishing where necessary to achieve Oeko-Tex 100 Class 1 and...view more PT 933 is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. Primarily used as a suitable for crease resistant finishing where necessary to achieve Oeko-Tex 100 Class 1 and Japanese Law 112 for baby wear and good chlorine resistance. view less | |
| PT 939 C | BIP (Oldbury) Ltd | PT 939 C is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. It is very reactive and primarily used with BCP for excellent DP ratings on cellulose fabrics. | |
| S 144 | BIP (Oldbury) Ltd | S 144 is a type of cationic softener. it has a suitable use as a softener for all cellulosic and polyester cellulose blends. | |
| Silicon Carbide | Boud Minerals & Polymers | Silicon Carbide is a hard, durable angular mineral used for non-slip, abrasive and decoration in PVC safety flooring, stair treads, loading ramps and areas that require high friction. The product is black with a sparkle appearance containing high thermal ...view more Silicon Carbide is a hard, durable angular mineral used for non-slip, abrasive and decoration in PVC safety flooring, stair treads, loading ramps and areas that require high friction. The product is black with a sparkle appearance containing high thermal conductivity and low thermal expansion that can be incorporated into a bespoke formulation blend or distributed on a standalone basis. view less | |
| Solid Glass Spheres | Boud Minerals & Polymers | Solid Glass Spheres are commonly used for anti-slip qualities in wet rooms and light reflectance in road line markings. They can also act as a flow aid in highly viscous resin systems and mouldings to improve stress distribution to enable a more uniform, ...view more Solid Glass Spheres are commonly used for anti-slip qualities in wet rooms and light reflectance in road line markings. They can also act as a flow aid in highly viscous resin systems and mouldings to improve stress distribution to enable a more uniform, smaller and controlled shrinkage. The spheres offer chemical resistance and low oil absorption and can be used in flooring systems and adhesives as well. view less | |
| Surkofilm® 64S | BIP (Oldbury) Ltd | Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It imparts softness and flexibility for reverse printing on PE and OPP. view less | |
| Surkofilm® 1137 | BIP (Oldbury) Ltd | Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...view more Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Primarily used in the production of lamination inks, mono-component or in combination with nitrocellulose as well as vinyl resins. view less | |
| Surkofilm® 62H | BIP (Oldbury) Ltd | Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is a harder version Surkofilm® 64S. view less | |
| Surkofilm® 653H | BIP (Oldbury) Ltd | Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...view more Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. it can be used in flexographic or gravure lamination and surface printing. as well as in combination with nitrocellulose or vinyl resin for the production of retortable inks. view less | |
| Surkofilm® 71H | BIP (Oldbury) Ltd | Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is used for the production of lamination inks for nylon and other films. view less | |
| Surkofilm® 72S | BIP (Oldbury) Ltd | Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is generally used for reverse printing & lamination inks. view less | |
| Surkofilm® 90H | BIP (Oldbury) Ltd | Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where...view more Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It has low viscosity and a hard PU component when in combination with vinyl resins. view less | |
| Surkofilm® MR 132 | BIP (Oldbury) Ltd | Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wh...view more Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Surkofilm® MR 132 is a mixed aromatic/aliphatic polyurethane for reverse printing onto PE & OPP. view less | |
| Surkopak® 2135 | BIP (Oldbury) Ltd | Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is soft, very flexible and has excellent solvent release properties. view less | |
| Surkopak® 5241 | BIP (Oldbury) Ltd | Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a solvent free version SP 5244. view less | |
| Surkopak® 5244 | BIP (Oldbury) Ltd | Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. General purpose, flexo-graphic and gravure inks. view less | |
| Surkopak® 5245 | BIP (Oldbury) Ltd | Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has improved alcohol tolerance compared to SP 5244. view less | |
| Surkopak® 5246 | BIP (Oldbury) Ltd | Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has lower solids and viscosity compared to SP 5245. view less | |
| Surkopak® 5255 | BIP (Oldbury) Ltd | Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5244. view less | |
| Surkopak® 5311 | BIP (Oldbury) Ltd | Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5323. view less | |
| Surkopak® 5323 | BIP (Oldbury) Ltd | Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has increased hardness when compared to SP 5255 and can be used in surface, reverse & lamination processes. view less | |
| Surkopak® X | BIP (Oldbury) Ltd | Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both r...view more Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It can be used on hard grade surfaces and in reverse and lamination processes. view less | |
| White Aluminium Oxide | Boud Minerals & Polymers | White Aluminium Oxide is a hard, white angular mineral used for anti-slip and abrasive purposes in decorative surfaces. This product can also be pigmented with highly-visible white and yellows to give anti-slip properties to stair treads and nosings. |
