| A 135 | BIP (Oldbury) Ltd | A 135 is a non ionic polyethylene emulsion, in a low viscosity liquid. It is used primarily to improve tear strength and can be used on any fabric. | |
| A 154 | BIP (Oldbury) Ltd | A 154 is a modified dicyandiamide formaldehyde precondensate. It is a clear colourless cationic solution. It is primarily used to improve wet fastness of direct dyes. | |
| A 174 | BIP (Oldbury) Ltd | A 174 is a non re-wetting emulsifier. It is designed for use with water repellants and fluorochemical finishes. It an also be used as a foaming agent for use in foam finishing systems. | |
| A 199 | BIP (Oldbury) Ltd | A 199 is a permanent repellant for all fibre types. | |
| AC 108 | BIP (Oldbury) Ltd | AC 108 is a modified ammonium chloride catalyst. It is a neutral clear liquid solution with low reactivity. Primarily used as a catalyst for urea and melamine resins. | |
| AC 119 | BIP (Oldbury) Ltd | AC 119 is a modified magnesium chloride catalyst. In a highly reactivity, low PH clear solution. It has applications where high production speeds required. | |
| AC 178 | BIP (Oldbury) Ltd | AC 178 is a magnesium chloride catalyst. It has medium reactivity and is a clear solution. It is mainly used in medium cure catalyst having minimum effect on shade. | |
| AC 600 | BIP (Oldbury) Ltd | AC 600 is an amine salt of p-toluene sulphonic acid in isopropanol. It is a highly reactive, clear solution. Primarily recommended for use in curing HMMM resin PT 370. | |
| BCP | BIP (Oldbury) Ltd | BCP is a blend of waterbased synthetic polymers. Primarily used as a coating on fabric to prevent wrinkles. It can be used in conjunction with PT 939C or A 135 and can be used for single pass systems. | |
| BEETLE® PT312 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise wate...view more PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT312 will also increase the efficiency of the OBA used, particularly in all latex formulations. view less | |
| BEETLE® PT336 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders...view more PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT336 will also increase the efficiency of the OBA used, particularly in all latex formulations. view less | |
| BEETLE® PT355 - Wet Strength Resin | BIP (Oldbury) Ltd | PT355 is a chlorine-free, zero AOX, highly reactive and efficient methylated melamine formaldehyde resin. PT355 colloid is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envel...view more PT355 is a chlorine-free, zero AOX, highly reactive and efficient methylated melamine formaldehyde resin. PT355 colloid is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes, sack-krafts, laundry tags, tea-bag tissue, and label papers. When used under optimum conditions of pH (4.5 - 6.5) and heat input, the resin will also improve basic sheet dry strength. An added benefit is that PT355 colloid will enhance the performance of rosin sizing agents. view less | |
| BEETLE® PT746 - Neutral Cure Wet Strength Resin | BIP (Oldbury) Ltd | PT746 is a cationic, low AOX/DCP polyamide epichlorohydrin resin. Though specifically designed for the production of wet strengthened papers by wet-end application to the paper machine, the special characteristics of BEETLE resin PT746 yields a versatile,...view more PT746 is a cationic, low AOX/DCP polyamide epichlorohydrin resin. Though specifically designed for the production of wet strengthened papers by wet-end application to the paper machine, the special characteristics of BEETLE resin PT746 yields a versatile, multifunctional product, useful in other applications and areas of the paper-making process. PT746 is used to impart wet strength in the production of a wide variety of papers based upon all cellulosic or all synthetic furnishes, or blends of both fibre types, when used under neutral to alkaline conditions. Higher dry strength often results from the use of PT746, particularly where high or all synthetic fibre furnishes are involved. view less | |
| BEETLE® PT789 - Wet Strength Resin | BIP (Oldbury) Ltd | PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack...view more PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack-krafts, when such products are made at pH levels below neutral. Since PT789 is a melamine resin, it is particularly suited to the production of higher quality, more demanding paper products such as hot-filters, laundry-tag, currency, security and bottle label papers. view less | |
| Ongronat® 1080 | BorsodChem Rt. | Ongronat® 1080 is a mixture of 2-methyl-m-phenylene diisocyanate and 4-methyl-m-phenylene diisocyanate in a 4:1 ratio. This product appears as a transparent liquid at room temperature. It can be used as a coating, and as adhesives and sealants. It feat...view more Ongronat® 1080 is a mixture of 2-methyl-m-phenylene diisocyanate and 4-methyl-m-phenylene diisocyanate in a 4:1 ratio. This product appears as a transparent liquid at room temperature. It can be used as a coating, and as adhesives and sealants. It features excellent adhesion, high gloss, and durability. view less | |
| Ongronat® 1100 | BorsodChem Rt. | Ongronat® 1100 is a 4-methyl-m-phenylene diisocyanate isomer. This product appears as a transparent liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features water and stain resistance, excellent adhe...view more Ongronat® 1100 is a 4-methyl-m-phenylene diisocyanate isomer. This product appears as a transparent liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features water and stain resistance, excellent adhesion, and high gloss. view less | |
| Ongronat® 1101 | BorsodChem Rt. | Ongronat® 1101 is a 2,4 TDI (T100) resin with elevated acidity. This product appears as solid, colourless or mildly yellow crystals at 20°C, 1013 hPa, and as a colourless or mildly yellow liquid at 25°C, 1013 hPa. It can be used in paints, coatings, adh...view more Ongronat® 1101 is a 2,4 TDI (T100) resin with elevated acidity. This product appears as solid, colourless or mildly yellow crystals at 20°C, 1013 hPa, and as a colourless or mildly yellow liquid at 25°C, 1013 hPa. It can be used in paints, coatings, adhesives and sealants. This product features a slow curing speed and low reactivity. view less | |
| Ongronat® 2100 | BorsodChem Rt. | Ongronat® 2100 is a polyphenyl-polymethylene-polyisocyanate resin. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as an adhesive, coating and sealant in construction applications. This produ...view more Ongronat® 2100 is a polyphenyl-polymethylene-polyisocyanate resin. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as an adhesive, coating and sealant in construction applications. This product has low thermal conductivity, excellent insulation properties, and is both weather- and water-resistant. view less | |
| Ongronat® 3000 | BorsodChem Rt. | Ongronat® 3000 is a 4,4'-methylene diphenyl diisocyanate resin. This product appears as a white crystalline solid at room temperature, and as a colourless liquid when melted. It can be used in a wide variety of paints and coatings, adhesives, and sealan...view more Ongronat® 3000 is a 4,4'-methylene diphenyl diisocyanate resin. This product appears as a white crystalline solid at room temperature, and as a colourless liquid when melted. It can be used in a wide variety of paints and coatings, adhesives, and sealants. It features weather-, chemical- and abrasion resistance. This product is flexible, strong and durable. view less | |
| Ongronat® 3020 | BorsodChem Rt. | Ongronat® 3020 is a 4,4'-methylenebis(phenylisocyanate) resin. This product appears as white crystals at room temperature. It can be used as a construction adhesive. This product features heat and chemical resistance, and a strong bonding capacity. | |
| Ongronat® 3045 | BorsodChem Rt. | Ongronat® 3045 is a 4,4'-methylene diphenyl diisocyanate resin. This product appears as a white crystalline solid at room temperature, and as a colourless liquid when molten. It can be used in paints and coatings for furniture, bedding, and wood. It fe...view more Ongronat® 3045 is a 4,4'-methylene diphenyl diisocyanate resin. This product appears as a white crystalline solid at room temperature, and as a colourless liquid when molten. It can be used in paints and coatings for furniture, bedding, and wood. It features weather-, chemical- and abrasion resistance, high strength, flexibility and durability. view less | |
| Ongronat® 3600 | BorsodChem Rt. | Ongronat® 3600 a mixture of methylenebis(phenylisocyanate) isomers. This product appears as a solvent-free, clear and colourless liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features weather-, che...view more Ongronat® 3600 a mixture of methylenebis(phenylisocyanate) isomers. This product appears as a solvent-free, clear and colourless liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features weather-, chemical- and abrasion resistance. It is very flexible, strong and durable. view less | |
| Ongronat® CO 2150 | BorsodChem Rt. | Ongronat® CO 2150 is a polyphenyl-polymethylene-polyisocyanate resin. This product appears as a solvent-free, dark brown, low-viscosity liquid at room temperature. It can be used in construction coatings and sealants. This product features high durabil...view more Ongronat® CO 2150 is a polyphenyl-polymethylene-polyisocyanate resin. This product appears as a solvent-free, dark brown, low-viscosity liquid at room temperature. It can be used in construction coatings and sealants. This product features high durability, high insulation and energy efficiency, and a barrier against dust and pollen. view less | |
| Ongronat® CO 2160 | BorsodChem Rt. | Ongronat® CO 2160 is a polyphenyl-polymethylene-polyisocyanate resin. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a construction adhesive. This product features mechanical and chemical...view more Ongronat® CO 2160 is a polyphenyl-polymethylene-polyisocyanate resin. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a construction adhesive. This product features mechanical and chemical resistance, a strong bonding capacity, and a controlled surface temperature. view less | |
| Ongronat® CO 2170 | BorsodChem Rt. | Ongronat® CO 2170 is a type of polymeric MDI with standard functionality and elevated acidity. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a construction adhesive. This product feature...view more Ongronat® CO 2170 is a type of polymeric MDI with standard functionality and elevated acidity. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a construction adhesive. This product features slower curing speed and a longer pot life. view less | |
| Ongronat® CO 4050 | BorsodChem Rt. | Ongronat® CO 4050 is a mixture of MDI mixed isomers with carbodiimide-modified 4,4'-methylene diphenyl diisocyanate and additives. This product appears as a solvent-free, colourless or pale yellow, low viscosity liquid at room temperature. It can be use...view more Ongronat® CO 4050 is a mixture of MDI mixed isomers with carbodiimide-modified 4,4'-methylene diphenyl diisocyanate and additives. This product appears as a solvent-free, colourless or pale yellow, low viscosity liquid at room temperature. It can be used in construction adhesives, sealants and coatings. This product features excellent adhesion and good mechanical properties. view less | |
| Ongronat® CO 4070 | BorsodChem Rt. | Ongronat® CO 4070 is an oligomeric MDI blend. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as construction adhesives, sealants, and coatings. This product features excellent thermal insula...view more Ongronat® CO 4070 is an oligomeric MDI blend. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as construction adhesives, sealants, and coatings. This product features excellent thermal insulation and good flowability. view less | |
| Ongronat® CO 4150 | BorsodChem Rt. | Ongronat® CO 4150 is a mixture of MDI-mixed isomers and oligomeric MDI. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used in construction adhesives. This product features good wetting propertie...view more Ongronat® CO 4150 is a mixture of MDI-mixed isomers and oligomeric MDI. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used in construction adhesives. This product features good wetting properties and good adhesion capability. view less | |
| Ongronat® CO 5700 | BorsodChem Rt. | Ongronat® CO 5700 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid free from any solid precip...view more Ongronat® CO 5700 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid free from any solid precipitates. It can be used as a construction adhesive. view less | |
| Ongronat® CO 5750 | BorsodChem Rt. | Ongronat® CO 5750 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid, free from solid precipita...view more Ongronat® CO 5750 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid, free from solid precipitates. It can be used as a construction adhesive. This product features high resilience bonding and good elongation properties. view less | |
| Ongronat® TR 2010 | BorsodChem Rt. | Ongronat® TR 2010 is a polyphenyl-polymethylene-polyisocyanate resin. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a coating in automotive paint applications. This product features high...view more Ongronat® TR 2010 is a polyphenyl-polymethylene-polyisocyanate resin. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a coating in automotive paint applications. This product features high thermal performance, heat, chemical, weather, and abrasion-resistance, and is a waterproof sealant. view less | |
| Ongronat® TR 4025 | BorsodChem Rt. | Ongronat® TR 4025 is a mixture of methylenebis(phenylisocyanate) isomers and oligomeric MDI. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a sound-dampening coating for the transport indu...view more Ongronat® TR 4025 is a mixture of methylenebis(phenylisocyanate) isomers and oligomeric MDI. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a sound-dampening coating for the transport industry. This product has high durability and is very heat-resistant. view less | |
| PT 312 | BIP (Oldbury) Ltd | PT 312 is a methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening of all fibre types. It has a low free formaldehyde version PT 338. | |
| PT 322 | BIP (Oldbury) Ltd | PT 322 is a modified urea resin. Primarily used in the production of economic fabric stiffeners. | |
| PT 336 | BIP (Oldbury) Ltd | PT 336 Methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening and binding of all fibre types. This product exhibits medium to high reactivity. | |
| PT 338 | BIP (Oldbury) Ltd | PT 338 is a methylated melamine resin. Primarily used as a resin for stiffening of all fabric types. | |
| PT 350 | BIP (Oldbury) Ltd | PT 350 is a modified reactant resin. Primarily used as a cross Linking Resins for Acrylic Pastes and coatings and use as fabric stiffeners or binders. It combines easy care with additive fixation. | |
| PT 368 | BIP (Oldbury) Ltd | PT 368 is a modified methylated melamine resin. It can be used to create a cost effective stiffening agent and binder. | |
| PT 370 | BIP (Oldbury) Ltd | PT 370 is a fully methylated HMMM resin. It is primarily used as a cross linking agent for synthetic, natural rubber latex and PUD's, chlorine resist finish and bonding of non woven material. | |
| PT 3745 | BIP (Oldbury) Ltd | PT 3745 is a fully methylated HMMM resin. Primarily used as a cross linking agent for synthetic, natural rubber latex and PUD's, chlorine resist finish and bonding of non woven material. | |
| PT 726 | BIP (Oldbury) Ltd | PT 726 is a modified polymer of ethylene urea. It is a non-ionic, clear to pale yellow, formaldehyde free liquid. Primarily used for crease resistant finishes on cellulose fiber fabrics when formaldehyde free product and requires no special catalyst. | |
| PT 727 | BIP (Oldbury) Ltd | PT 727 is a modified urea formaldehyde polymer. It is a clear, straw coloured cationic liquid. Primarily used for anchoring thermoplastic coatings to regenerated cellulose film. | |
| PT 729 | BIP (Oldbury) Ltd | PT 729 is an oligomer of dimethylol cyclic ethylene urea. It is a non-ionic reactant resin. Primarily used as a soft crease resistant and mechanical finishes for cellulosic fibres, woven and knitted goods, can also be used for white goods where chlorine r...view more PT 729 is an oligomer of dimethylol cyclic ethylene urea. It is a non-ionic reactant resin. Primarily used as a soft crease resistant and mechanical finishes for cellulosic fibres, woven and knitted goods, can also be used for white goods where chlorine retention is of no importance. view less | |
| PT 931 | BIP (Oldbury) Ltd | PT 931 is a dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde clear solution that is primarily used as a crease resistant and permanent press finish for fabrics containing cellulosic/synthetic fibre blends. Th...view more PT 931 is a dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde clear solution that is primarily used as a crease resistant and permanent press finish for fabrics containing cellulosic/synthetic fibre blends. This product gives improved chlorine resistance and very low residual formaldehyde. view less | |
| PT 933 | BIP (Oldbury) Ltd | PT 933 is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. Primarily used as a suitable for crease resistant finishing where necessary to achieve Oeko-Tex 100 Class 1 and...view more PT 933 is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. Primarily used as a suitable for crease resistant finishing where necessary to achieve Oeko-Tex 100 Class 1 and Japanese Law 112 for baby wear and good chlorine resistance. view less | |
| PT 939 C | BIP (Oldbury) Ltd | PT 939 C is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. It is very reactive and primarily used with BCP for excellent DP ratings on cellulose fabrics. | |
| S 144 | BIP (Oldbury) Ltd | S 144 is a type of cationic softener. it has a suitable use as a softener for all cellulosic and polyester cellulose blends. | |
| Surkofilm® 64S | BIP (Oldbury) Ltd | Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It imparts softness and flexibility for reverse printing on PE and OPP. view less | |
| Surkofilm® 1137 | BIP (Oldbury) Ltd | Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...view more Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Primarily used in the production of lamination inks, mono-component or in combination with nitrocellulose as well as vinyl resins. view less | |
| Surkofilm® 62H | BIP (Oldbury) Ltd | Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is a harder version Surkofilm® 64S. view less | |
| Surkofilm® 653H | BIP (Oldbury) Ltd | Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...view more Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. it can be used in flexographic or gravure lamination and surface printing. as well as in combination with nitrocellulose or vinyl resin for the production of retortable inks. view less | |
| Surkofilm® 71H | BIP (Oldbury) Ltd | Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is used for the production of lamination inks for nylon and other films. view less | |
| Surkofilm® 72S | BIP (Oldbury) Ltd | Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is generally used for reverse printing & lamination inks. view less | |
| Surkofilm® 90H | BIP (Oldbury) Ltd | Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where...view more Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It has low viscosity and a hard PU component when in combination with vinyl resins. view less | |
| Surkofilm® MR 132 | BIP (Oldbury) Ltd | Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wh...view more Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Surkofilm® MR 132 is a mixed aromatic/aliphatic polyurethane for reverse printing onto PE & OPP. view less | |
| Surkopak® 2135 | BIP (Oldbury) Ltd | Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is soft, very flexible and has excellent solvent release properties. view less | |
| Surkopak® 5241 | BIP (Oldbury) Ltd | Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a solvent free version SP 5244. view less | |
| Surkopak® 5244 | BIP (Oldbury) Ltd | Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. General purpose, flexo-graphic and gravure inks. view less | |
| Surkopak® 5245 | BIP (Oldbury) Ltd | Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has improved alcohol tolerance compared to SP 5244. view less | |
| Surkopak® 5246 | BIP (Oldbury) Ltd | Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has lower solids and viscosity compared to SP 5245. view less | |
| Surkopak® 5255 | BIP (Oldbury) Ltd | Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5244. view less | |
| Surkopak® 5311 | BIP (Oldbury) Ltd | Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5323. view less | |
| Surkopak® 5323 | BIP (Oldbury) Ltd | Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has increased hardness when compared to SP 5255 and can be used in surface, reverse & lamination processes. view less | |
| Surkopak® X | BIP (Oldbury) Ltd | Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both r...view more Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It can be used on hard grade surfaces and in reverse and lamination processes. view less |
