| A 135 | BIP (Oldbury) Ltd | A 135 is a non ionic polyethylene emulsion, in a low viscosity liquid. It is used primarily to improve tear strength and can be used on any fabric. | |
| A 154 | BIP (Oldbury) Ltd | A 154 is a modified dicyandiamide formaldehyde precondensate. It is a clear colourless cationic solution. It is primarily used to improve wet fastness of direct dyes. | |
| A 174 | BIP (Oldbury) Ltd | A 174 is a non re-wetting emulsifier. It is designed for use with water repellants and fluorochemical finishes. It an also be used as a foaming agent for use in foam finishing systems. | |
| A 199 | BIP (Oldbury) Ltd | A 199 is a permanent repellant for all fibre types. | |
| AC 108 | BIP (Oldbury) Ltd | AC 108 is a modified ammonium chloride catalyst. It is a neutral clear liquid solution with low reactivity. Primarily used as a catalyst for urea and melamine resins. | |
| AC 119 | BIP (Oldbury) Ltd | AC 119 is a modified magnesium chloride catalyst. In a highly reactivity, low PH clear solution. It has applications where high production speeds required. | |
| AC 178 | BIP (Oldbury) Ltd | AC 178 is a magnesium chloride catalyst. It has medium reactivity and is a clear solution. It is mainly used in medium cure catalyst having minimum effect on shade. | |
| AC 600 | BIP (Oldbury) Ltd | AC 600 is an amine salt of p-toluene sulphonic acid in isopropanol. It is a highly reactive, clear solution. Primarily recommended for use in curing HMMM resin PT 370. | |
| BCP | BIP (Oldbury) Ltd | BCP is a blend of waterbased synthetic polymers. Primarily used as a coating on fabric to prevent wrinkles. It can be used in conjunction with PT 939C or A 135 and can be used for single pass systems. | |
| BEETLE® PT312 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise wate...view more PT312 is a methylated melamine formaldehyde resin specifically formulated to give low free formaldehyde when compared with other, more conventional melamine formaldehyde resins. PT312 is used in pigmented paper coatings to cross-link and insolubilise water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT312 will also increase the efficiency of the OBA used, particularly in all latex formulations. view less | |
| BEETLE® PT336 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders...view more PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT336 will also increase the efficiency of the OBA used, particularly in all latex formulations. view less | |
| BEETLE® PT355 - Wet Strength Resin | BIP (Oldbury) Ltd | PT355 is a chlorine-free, zero AOX, highly reactive and efficient methylated melamine formaldehyde resin. PT355 colloid is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envel...view more PT355 is a chlorine-free, zero AOX, highly reactive and efficient methylated melamine formaldehyde resin. PT355 colloid is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes, sack-krafts, laundry tags, tea-bag tissue, and label papers. When used under optimum conditions of pH (4.5 - 6.5) and heat input, the resin will also improve basic sheet dry strength. An added benefit is that PT355 colloid will enhance the performance of rosin sizing agents. view less | |
| BEETLE® PT746 - Neutral Cure Wet Strength Resin | BIP (Oldbury) Ltd | PT746 is a cationic, low AOX/DCP polyamide epichlorohydrin resin. Though specifically designed for the production of wet strengthened papers by wet-end application to the paper machine, the special characteristics of BEETLE resin PT746 yields a versatile,...view more PT746 is a cationic, low AOX/DCP polyamide epichlorohydrin resin. Though specifically designed for the production of wet strengthened papers by wet-end application to the paper machine, the special characteristics of BEETLE resin PT746 yields a versatile, multifunctional product, useful in other applications and areas of the paper-making process. PT746 is used to impart wet strength in the production of a wide variety of papers based upon all cellulosic or all synthetic furnishes, or blends of both fibre types, when used under neutral to alkaline conditions. Higher dry strength often results from the use of PT746, particularly where high or all synthetic fibre furnishes are involved. view less | |
| BEETLE® PT789 - Wet Strength Resin | BIP (Oldbury) Ltd | PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack...view more PT789 is a chlorine free, ready for use, cationic melamine formaldehyde colloid in aqueous solution. PT789 is used to impart wet strength to a wide variety of paper and paperboard products from heavy duty towels and wipes to wallpapers, envelopes and sack-krafts, when such products are made at pH levels below neutral. Since PT789 is a melamine resin, it is particularly suited to the production of higher quality, more demanding paper products such as hot-filters, laundry-tag, currency, security and bottle label papers. view less | |
| BURGESS 2211 | Burgess Pigment Company | BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, a...view more BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, and sealants. view less | |
| BURGESS 30P® | Burgess Pigment Company | BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...view more BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. view less | |
| BURGESS 5178 | Burgess Pigment Company | BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extende...view more BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extender or filler in paints, coatings, adhesives, and sealants. view less | |
| BURGESS CB | Burgess Pigment Company | BURGESS CB is a surface modified calcined aluminum silicate that has been designed for use in crosslinked polyethylene and polyester. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS ICEBERG® | Burgess Pigment Company | BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opa...view more BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opacity, higher degree of whiteness, better tint strength, easy dispersion, and low moisture levels in moisture sensitive applications. view less | |
| BURGESS ICECAP K® | Burgess Pigment Company | BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives...view more BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. view less | |
| BURGESS ICECAP KSF | Burgess Pigment Company | BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely ...view more BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely low 325 (45 micron) mesh residue. view less | |
| BURGESS KE | Burgess Pigment Company | BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender ...view more BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender or filler in paints, coatings, adhesives, and sealants. view less | |
| BURGESS NO. 10 | Burgess Pigment Company | BURGESS NO. 10 is a fine particle size, medium brightness hydrous kaolin clay. This product exhibits dispersion in water based, acid pH, alkyd, or solvent based coatings and inks, electrodeposition body primers, as well as EIFS. | |
| BURGESS NO. 17 | Burgess Pigment Company | BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness. | |
| BURGESS NO. 20 | Burgess Pigment Company | BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an...view more BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an extender or filler in paints, coatings, adhesives, and sealants. view less | |
| BURGESS NO. 27 | Burgess Pigment Company | BURGESS NO. 27 is an ultra fine particle size, medium brightness hydrous kaolin clay. This product is used as an extender in semigloss, satin, and gloss paints. | |
| BURGESS NO. 28 | Burgess Pigment Company | BURGESS NO. 28 is an ultra fine particle size, higher brightness hydrous kaolin clay. This product is used to extend TiO2 while maintaining tint strength and gloss. It is used extensively in water based satin and semigloss coating systems. | |
| BURGESS NO. 30® | Burgess Pigment Company | BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...view more BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. view less | |
| BURGESS NO. 40 | Burgess Pigment Company | BURGESS NO. 40 is a median particle size, medium brightness hydrous kaolin clay. This product is an acid pH clay exhibiting excellent dispersion properties, and can be used in trade sales coatings and adhesives. | |
| BURGESS NO. 50® | Burgess Pigment Company | BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings ...view more BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings and retention of physical properties in filled polymeric systems. view less | |
| BURGESS NO. 60 | Burgess Pigment Company | BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS. | |
| BURGESS NO. 97 | Burgess Pigment Company | BURGESS NO. 97 is an ultra fine particle size, medium brightness hydrous kaolin clay that exhibits excellent tint strength. This product is a well-ground extender of TiO2 in semigloss, satin, and gloss paints. | |
| BURGESS NO. 98 | Burgess Pigment Company | BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss...view more BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss paints. view less | |
| BURGESS OPTIPOZZ® | Burgess Pigment Company | BURGESS OPTIPOZZ® is a high reactivity metakaolin produced by a patented process. This product increases chemical resistance and durability, and reduces shrinkage. It can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS OPTIWHITE® | Burgess Pigment Company | BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention...view more BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention and hiding when embedded in coatings and polymers. It can provide excellent dispersion, high hiding, and improved film properties. view less | |
| BURGESS OPTIWHITE MX® | Burgess Pigment Company | BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based ...view more BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based coatings by reducing the amount of TiO2 and lowering raw material costs while maintaining opacity, whiteness, and tint strength. view less | |
| BURGESS OPTIWHITE P® | Burgess Pigment Company | BURGESS OPTIWHITE P® is a flash calcined clay used extensively to extend TiO2. This product exhibits GE Brightness, improves touchup, scrub, and burnish resistance. It is used in flat interior trade sales paints which do not require maximum whiteness. | |
| BURGESS POLYCLAY | Burgess Pigment Company | BURGESS POLYCLAY is a fine particle size, medium brightness hydrous kaolin clay used in inks. | |
| BURGESS THERMOGLACE H | Burgess Pigment Company | BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability...view more BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability. view less | |
| PT 312 | BIP (Oldbury) Ltd | PT 312 is a methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening of all fibre types. It has a low free formaldehyde version PT 338. | |
| PT 322 | BIP (Oldbury) Ltd | PT 322 is a modified urea resin. Primarily used in the production of economic fabric stiffeners. | |
| PT 336 | BIP (Oldbury) Ltd | PT 336 Methylated melamine resin. It is a clear, water white, resin for cross linking or for stiffening and binding of all fibre types. This product exhibits medium to high reactivity. | |
| PT 338 | BIP (Oldbury) Ltd | PT 338 is a methylated melamine resin. Primarily used as a resin for stiffening of all fabric types. | |
| PT 350 | BIP (Oldbury) Ltd | PT 350 is a modified reactant resin. Primarily used as a cross Linking Resins for Acrylic Pastes and coatings and use as fabric stiffeners or binders. It combines easy care with additive fixation. | |
| PT 368 | BIP (Oldbury) Ltd | PT 368 is a modified methylated melamine resin. It can be used to create a cost effective stiffening agent and binder. | |
| PT 370 | BIP (Oldbury) Ltd | PT 370 is a fully methylated HMMM resin. It is primarily used as a cross linking agent for synthetic, natural rubber latex and PUD's, chlorine resist finish and bonding of non woven material. | |
| PT 3745 | BIP (Oldbury) Ltd | PT 3745 is a fully methylated HMMM resin. Primarily used as a cross linking agent for synthetic, natural rubber latex and PUD's, chlorine resist finish and bonding of non woven material. | |
| PT 726 | BIP (Oldbury) Ltd | PT 726 is a modified polymer of ethylene urea. It is a non-ionic, clear to pale yellow, formaldehyde free liquid. Primarily used for crease resistant finishes on cellulose fiber fabrics when formaldehyde free product and requires no special catalyst. | |
| PT 727 | BIP (Oldbury) Ltd | PT 727 is a modified urea formaldehyde polymer. It is a clear, straw coloured cationic liquid. Primarily used for anchoring thermoplastic coatings to regenerated cellulose film. | |
| PT 729 | BIP (Oldbury) Ltd | PT 729 is an oligomer of dimethylol cyclic ethylene urea. It is a non-ionic reactant resin. Primarily used as a soft crease resistant and mechanical finishes for cellulosic fibres, woven and knitted goods, can also be used for white goods where chlorine r...view more PT 729 is an oligomer of dimethylol cyclic ethylene urea. It is a non-ionic reactant resin. Primarily used as a soft crease resistant and mechanical finishes for cellulosic fibres, woven and knitted goods, can also be used for white goods where chlorine retention is of no importance. view less | |
| PT 931 | BIP (Oldbury) Ltd | PT 931 is a dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde clear solution that is primarily used as a crease resistant and permanent press finish for fabrics containing cellulosic/synthetic fibre blends. Th...view more PT 931 is a dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde clear solution that is primarily used as a crease resistant and permanent press finish for fabrics containing cellulosic/synthetic fibre blends. This product gives improved chlorine resistance and very low residual formaldehyde. view less | |
| PT 933 | BIP (Oldbury) Ltd | PT 933 is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. Primarily used as a suitable for crease resistant finishing where necessary to achieve Oeko-Tex 100 Class 1 and...view more PT 933 is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. Primarily used as a suitable for crease resistant finishing where necessary to achieve Oeko-Tex 100 Class 1 and Japanese Law 112 for baby wear and good chlorine resistance. view less | |
| PT 939 C | BIP (Oldbury) Ltd | PT 939 C is a modified dimethoxymethyl dihydroxyethylene urea reactant resin. It is a non-ionic, low free formaldehyde, clear, colourless liquid. It is very reactive and primarily used with BCP for excellent DP ratings on cellulose fabrics. | |
| S 144 | BIP (Oldbury) Ltd | S 144 is a type of cationic softener. it has a suitable use as a softener for all cellulosic and polyester cellulose blends. | |
| Surkofilm® 64S | BIP (Oldbury) Ltd | Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It imparts softness and flexibility for reverse printing on PE and OPP. view less | |
| Surkofilm® 1137 | BIP (Oldbury) Ltd | Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...view more Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Primarily used in the production of lamination inks, mono-component or in combination with nitrocellulose as well as vinyl resins. view less | |
| Surkofilm® 62H | BIP (Oldbury) Ltd | Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is a harder version Surkofilm® 64S. view less | |
| Surkofilm® 653H | BIP (Oldbury) Ltd | Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...view more Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. it can be used in flexographic or gravure lamination and surface printing. as well as in combination with nitrocellulose or vinyl resin for the production of retortable inks. view less | |
| Surkofilm® 71H | BIP (Oldbury) Ltd | Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is used for the production of lamination inks for nylon and other films. view less | |
| Surkofilm® 72S | BIP (Oldbury) Ltd | Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is generally used for reverse printing & lamination inks. view less | |
| Surkofilm® 90H | BIP (Oldbury) Ltd | Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where...view more Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It has low viscosity and a hard PU component when in combination with vinyl resins. view less | |
| Surkofilm® MR 132 | BIP (Oldbury) Ltd | Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wh...view more Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Surkofilm® MR 132 is a mixed aromatic/aliphatic polyurethane for reverse printing onto PE & OPP. view less | |
| Surkopak® 2135 | BIP (Oldbury) Ltd | Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is soft, very flexible and has excellent solvent release properties. view less | |
| Surkopak® 5241 | BIP (Oldbury) Ltd | Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a solvent free version SP 5244. view less | |
| Surkopak® 5244 | BIP (Oldbury) Ltd | Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. General purpose, flexo-graphic and gravure inks. view less | |
| Surkopak® 5245 | BIP (Oldbury) Ltd | Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has improved alcohol tolerance compared to SP 5244. view less | |
| Surkopak® 5246 | BIP (Oldbury) Ltd | Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has lower solids and viscosity compared to SP 5245. view less | |
| Surkopak® 5255 | BIP (Oldbury) Ltd | Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5244. view less | |
| Surkopak® 5311 | BIP (Oldbury) Ltd | Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5323. view less | |
| Surkopak® 5323 | BIP (Oldbury) Ltd | Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has increased hardness when compared to SP 5255 and can be used in surface, reverse & lamination processes. view less | |
| Surkopak® X | BIP (Oldbury) Ltd | Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both r...view more Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It can be used on hard grade surfaces and in reverse and lamination processes. view less |
