2,2-Dibromo-3-Nitrilopropionamide (DBNPA) is a kind of wide spectrum, high efficiency, industrial germicide that can be used in paint and as an adhesive.
BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, pri...view more
BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, printing ink and more. view less
Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...view more
Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. view less
Castor Thickener (Blend) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Blend) has advantages in improved storage ...view more
Castor Thickener (Blend) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Blend) has advantages in improved storage stability and leveling, no hard settling of pigments, and provides sag control. Other applications are in adhesives, sealants, alkyd resins, and 2K PU systems. Castor Thickener (Blend) has a melting point of 136°C to 140°C, a saponification value of 130 to 138 mg KOH/g, and an acid value of 6 mg KOH/g max. view less
Castor Thickener (Pure) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Pure) has advantages in improved storage st...view more
Castor Thickener (Pure) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Pure) has advantages in improved storage stability and leveling, no hard settling of pigments, and provides sag control. Other applications are in adhesives, sealants, alkyd resins, and 2K PU systems. Castor Thickener (Pure) has a melting point of 82°C to 88°C, a saponification value of 177 to 182 mg KOH/g, and an acid value of 4 mg KOH/g max. view less
Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane form...view more
Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less
Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane form...view more
Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less
Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethan...view more
Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less
Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyure...view more
Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less
Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyure...view more
Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less
Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyu...view more
Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less
Hycure 1173, also known as 2-Hydroxy-2-Methyl-1-Phenylpropan, is a photoinitiator for ultraviolet solidify systems that can extend the storeable time and keep it from turning yellow for a long time.
Hycure 184, also known as 1-Hydroxycyclohexyl Phenyl Ketone, is a photoinitiator used for ultraviolet solidify systems that can extend its store-able time and keep it from turning yellow for a long time.
Hycure 907, also known as 2-Methy-1-[4-(methylthio)-Phenyl]-2-Morpholinopropan-1-One, is a high performance photoinitiator and is used for ultraviolet solidify systems, extending its store-able time and keeping it from turning yellow for a long time.
Hycure BDK, also known as 2,2-Dimethoxy- 2-Phenylacetophenone, is a photoinitiator that is mainly used as the light curing agent for ultraviolet curing systems, metal paints, paper paints, and is applied to printing ink.
Hycure Benzil, also known as Bibenzoyl, is a photoinitiator used as the raw material for certain medicines, an intermediary for organic synthesis, is an ultraviolet hardening agent and a pesticide.
Hycure Benzoin, also known as 2-diphenyl ethanone, is used as a photoinitiator in regards to photo-curable coatings also as an antiseptic in the pharmaceutical industry.
Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...view more
Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. view less
OIT, also known as 2-Octyl-4-Isothiazolin-3-Ketone, is a low toxic and highly effective broad spectrum antiseptic that is mainly used to control mildew. This product is also applicable in polymer emulsions, adhesives, sealants, and paint.
Partially Dehydrated Castor Oil is created when part of the chemically combined water, has been removed. Heating the oil in the presence of catalysts such as clay's and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out....view more
Partially Dehydrated Castor Oil is created when part of the chemically combined water, has been removed. Heating the oil in the presence of catalysts such as clay's and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Partially Dehydrated Castor Oil has a characteristic odor and is a yellow oily liquid. It has an acid value of 5 mg KOH/g max and can be used as a hydrophobic and plasticizer component in paints, coatings, and moldings. view less
Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling ag...view more
Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling agent. Sulphonated Castor Oil (SCO) is used as a dispersion and pigment wetting application in the paint industry, and as leveling and dye dispersion in the inks industry, among others. view less
TGIC, also known as Tris(2,3-Epoxyproryl)Isocyanurate, is used primarily as a curing agent for polyester powder coatings. This product also has applications in the manufacture of electrical insulation materials, printed circuits, tools, laminated sheeting...view more
TGIC, also known as Tris(2,3-Epoxyproryl)Isocyanurate, is used primarily as a curing agent for polyester powder coatings. This product also has applications in the manufacture of electrical insulation materials, printed circuits, tools, laminated sheetings, adhesives, and more. view less
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
We're sorry, but the industry you have selected is not currently available in your chosen language. You may choose a language below to continue to this industry or close this dialog above.