| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...view more 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. view less | |
| Blown Castor Oil (BCO) | Castor International BV | Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...view more Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. view less | |
| Castor Oil | Castor International BV | Castor Oil, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor and is pale-yellowish or almost colorless. There are numerous applications in various industrial s...view more Castor Oil, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor and is pale-yellowish or almost colorless. There are numerous applications in various industrial segments, because of its unique molecule structure, such as lubricants in hydraulic fluids and 2 stroke engines, polyurethane in PU floor coatings, PU adhesives/sealants and PU foams, adhesives in hot-melts, and more. view less | |
| Castor Oil FSG Low Acid Value | Castor International BV | Castor Oil FSG Low Acid Value, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/...view more Castor Oil FSG Low Acid Value, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/g max. There are numerous applications in various industrial segments, because of its unique molecule structure, such as polyurethane in PU floor coatings, PU adhesives/sealants and PU foams. view less | |
| Castor Oil FSG Low Water Content | Castor International BV | Castor Oil FSG Low Water Content, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg K...view more Castor Oil FSG Low Water Content, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/g max. There are numerous applications in various industrial segments, because of its unique molecule structure, such as polyurethane in PU floor coatings, PU adhesives/sealants and PU foams. view less | |
| Castor Polyol (Type 114) | Castor International BV | Castor Polyol (Type 114) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1145. It is for use in vari...view more Castor Polyol (Type 114) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1145. It is for use in various fillers, like silicates, quartz, calcium carbonate and barites, additives and pigments as a leveling aids and defoamers and it may be added to such formulations for preparing coatings, adhesives, floor coatings, electrical casting applications, and sealants. view less | |
| Castor Polyol (Type 115) | Castor International BV | Castor Polyol (Type 115) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of 1.000 ± 0.00 (25°C) and is developed as an alternative for Desmophen-1150. It is cured with MDI and th...view more Castor Polyol (Type 115) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of 1.000 ± 0.00 (25°C) and is developed as an alternative for Desmophen-1150. It is cured with MDI and the nature and addition of additives and fillers may vary depending on the particular formulation for making: adhesives, coatings, floorings, and electrical casting applications. view less | |
| Castor Polyol (Type 116) | Castor International BV | Castor Polyol (Type 116) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1155. It can be cured with ...view more Castor Polyol (Type 116) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1155. It can be cured with MDI and its variants or by aliphatic isocyanates like HDI, in combination with castor polyol types 114 and 115. Castor Polyol (Type 116) has many applications, for instance: in various fillers, like silicates, quartz, calcium carbonate, and barites: in additives and pigments, like leveling aids and defoamers: and may be added to such formulations for preparing coatings, adhesives, floor coatings, electrical casting applications, and sealants. view less | |
| Castor Thickener (Blend) | Castor International BV | Castor Thickener (Blend) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Blend) has advantages in improved storage ...view more Castor Thickener (Blend) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Blend) has advantages in improved storage stability and leveling, no hard settling of pigments, and provides sag control. Other applications are in adhesives, sealants, alkyd resins, and 2K PU systems. Castor Thickener (Blend) has a melting point of 136°C to 140°C, a saponification value of 130 to 138 mg KOH/g, and an acid value of 6 mg KOH/g max. view less | |
| Castor Thickener (Pure) | Castor International BV | Castor Thickener (Pure) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Pure) has advantages in improved storage st...view more Castor Thickener (Pure) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Pure) has advantages in improved storage stability and leveling, no hard settling of pigments, and provides sag control. Other applications are in adhesives, sealants, alkyd resins, and 2K PU systems. Castor Thickener (Pure) has a melting point of 82°C to 88°C, a saponification value of 177 to 182 mg KOH/g, and an acid value of 4 mg KOH/g max. view less | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...view more Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...view more Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...view more Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Drying additive 3A (Paste 50) | Castor International BV | Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane form...view more Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 3A (Paste 60) | Castor International BV | Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane form...view more Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 3A (Powder) | Castor International BV | Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethan...view more Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Paste 50) | Castor International BV | Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyure...view more Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Paste 60) | Castor International BV | Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyure...view more Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Powder) | Castor International BV | Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyu...view more Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Dynoadd® D-960 | Dynoadd by Dynea | Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment w...view more Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment wetting and deflocculation giving stable dispersions with low particle size. Pigment dispersions produced using Dynoadd D-960 have low viscosity and give excellent color strength, stability, and gloss in a wide variety of water-borne industrial coatings and printing inks. view less | Request Sample |
| Dynoadd® D-962 | Dynoadd by Dynea | Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates ...view more Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates produced using Dynoadd® D-962 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. view less | Request Sample |
| Dynoadd® D-963 | Dynoadd by Dynea | Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pig...view more Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pigment wetting and deflocculation achieved with Dynoadd® D-963 results in stable dispersions with low particle size. Pigment concentrates produced using Dynoadd® D-963 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. view less | Request Sample |
| Dynoadd® F-1 | Dynoadd by Dynea | Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are ...view more Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-1 has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-1 is an excellent choice in multiple-layer coatings. Dynoadd® F-1 has applications in industrial coatings, coil coatings, automotive OEM, printing inks, and woods coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-100 | Dynoadd by Dynea | Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with b...view more Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with backbone resins than Dynoadd® F-1 and gives improved performance in more polar systems. Dynoadd® F-100 has applications in coil coatings, can coatings, automotive OEM, and printing inks. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-1. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-101 | Dynoadd by Dynea | Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dyno...view more Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-101 is more polar than Dynoadd® F-100. Dynoadd® F-101 gives improved protection against surface defects in radcure formulations. The higher polarity contributes to good pigment wetting and improved adhesion in some systems. Dynoadd® F-101 has application in coil coatings, automotive OEM, printing ink, and radcure coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, Dynoadd® F-101 is seen to have an extra advantage in polar lacquer systems due to its polar properties. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulati...view more Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulations. Addition of Dynoadd® F-102 will have a positive contribution to substrate wetting. Dynoadd® F-102 can be used in combination with other Dynoadd® products such as Dynoadd® F-1. Dynoadd® F-102 has applications in coil coatings and general industrial. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as leveling. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-106 | Dynoadd by Dynea | Dynoadd® F-106 is a non-silicone, flow and levelling additive for solvent based automotive clear coat formulations. Surface defects such as orange peel, craters and popping are eliminated. Dynoadd® F-106 improves flow and levelling whilst maintaining exce...view more Dynoadd® F-106 is a non-silicone, flow and levelling additive for solvent based automotive clear coat formulations. Surface defects such as orange peel, craters and popping are eliminated. Dynoadd® F-106 improves flow and levelling whilst maintaining excellent clarity. Dynoadd® F-106 has applications as a automotive OEM clear coat. view less | Request Sample |
| Dynoadd® F-113 | Dynoadd by Dynea | Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 c...view more Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 can improve protective film release and, in some cases, anti-graffiti properties. Surface defects such as orange peel, craters, and popping are eliminated. view less | Request Sample |
| Dynoadd® F-200 | Dynoadd by Dynea | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes....view more Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. view less | Request Sample |
| Dynoadd® F-201ND | Dynoadd by Dynea | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flo...view more Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. view less | Request Sample |
| Dynoadd® F-300 | Dynoadd by Dynea | Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with b...view more Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with backbone resins than Dynoadd® F-3 and gives improved performance in more polar systems. Dynoadd® F-300 has applications in can coatings and coil coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-3. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-3B | Dynoadd by Dynea | Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissi...view more Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-3Bg has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-3Bg is an excellent choice in multiple-layer coatings, as it does not interfere with inter-coat adhesion. Dynoadd® F-3B has applications in coil coatings and can coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-404 | Dynoadd by Dynea | Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The ad...view more Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-404 has applications in general industry, wood coatings, and automotive OEM/refinish. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. view less | Request Sample |
| Dynoadd® F-409 | Dynoadd by Dynea | Dynoadd® F-409 is a polyester-based, siloxane modified additive that effectively controls surface tension in UV coating systems. Dynoadd® F-409 gives excellent flow, level lingand over-spray cratering resistance to spray applied coatings. The additive si...view more Dynoadd® F-409 is a polyester-based, siloxane modified additive that effectively controls surface tension in UV coating systems. Dynoadd® F-409 gives excellent flow, level lingand over-spray cratering resistance to spray applied coatings. The additive significantly reduces orange peel and improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-409 has applications in general industry and wood coatings. The additive is compatible with most solvent-borne and solvent-free radiation curing systems independent of oligomer chemistry. view less | Request Sample |
| Dynoadd® F-414 | Dynoadd by Dynea | Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The ad...view more Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with an increasing level of addition. view less | Request Sample |
| Dynoadd® F-461 | Dynoadd by Dynea | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...view more Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. view less | Request Sample |
| Dynoadd® F-462 | Dynoadd by Dynea | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | Request Sample |
| Dynoadd® F-470 | Dynoadd by Dynea | Dynoadd® F-470 eliminates air entrapment, pinholes and surface foam. It prevents foaming during manufacture and application. Dynoadd® F-470 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated ...view more Dynoadd® F-470 eliminates air entrapment, pinholes and surface foam. It prevents foaming during manufacture and application. Dynoadd® F-470 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated PE and PUs. Dynoadd® F-470 does not reduce transparency and is recommended for clear coats. Dynoadd® F-470 contains a lower level of fluoro polymer. view less | Request Sample |
| Dynoadd® F-601 | Dynoadd by Dynea | Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfectio...view more Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfections. Dynoadd® F-601 has applications in industrial coatings, wood coatings, RadCure, and automotive. The additive may be used in most water-borne coating systems independently of lacquer chemistry if the additive is added prior to dilution with water. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-603 | Dynoadd by Dynea | Dynoadd® F-603 is non-silicone, anionic additive for water-borne systems. Dynoadd® F-603 imparts improved substrate wetting, flow and levelling without the formation of foam. Dynoadd® F-603 has applications in industrial coatings, wood coatings, RadCure, ...view more Dynoadd® F-603 is non-silicone, anionic additive for water-borne systems. Dynoadd® F-603 imparts improved substrate wetting, flow and levelling without the formation of foam. Dynoadd® F-603 has applications in industrial coatings, wood coatings, RadCure, and automotive. The additive may be used in most water-borne coating systems independently of lacquer chemistry. The effect of the additive on the stability of the resin should be controlled as part of the evaluation procedure. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-606 | Dynoadd by Dynea | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...view more Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. view less | Request Sample |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...view more Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. view less | Request Sample |
| Dynoadd® F-701B | Dynoadd by Dynea | Dynoadd® F-701B is a highly effective polymeric additive, particularly effective as air release and anti popping agent. It controls surface tension in solvent based coating systems. Small additions may also contribute to improved flow, and a reduction in ...view more Dynoadd® F-701B is a highly effective polymeric additive, particularly effective as air release and anti popping agent. It controls surface tension in solvent based coating systems. Small additions may also contribute to improved flow, and a reduction in surface imperfections like craters, orange peel and pinholes. This product has a good compatibility with many wax dispersions giving good performance also in highly waxed coatings. Dynoadd® F-701B can be used in combination with Dynoadd® flow additives, in particular Dynoadd® F-101. view less | Request Sample |
| Dynoadd® F-705 | Dynoadd by Dynea | Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and p...view more Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and pinholes. It can be used as a foam control and de-aerating additive in solvent-borne food contact coatings at levels up to 0.1%. Dynoadd® F-705 is recommended for use as defoamer and de-airator in thick film coatings (2K epoxy, UP, PUR). Dynoadd® F-705 has applications in packaging coatings, direct food contact, UV coatings, general industry, and floor coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-706 | Dynoadd by Dynea | Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the ...view more Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the coating. Dynoadd® F-706 has applications in UV coatings. The additive is compatible with most solvent-borne and non-solvent RadCure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-707 | Dynoadd by Dynea | Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. S...view more Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. Small additions may also contribute to improved flow and a reduction in surface imperfections like craters and orange peel. Dynoadd® F-707 has a good compatibility with many wax dispersions, giving good performance also in highly waxed coatings. Dynoadd® F-707 can also be used in combination with Dynoadd® flow additives. Dynoadd® F-707 has applications in coil coatings, PVdF, general industry, and packaging coatings. The additive is compatible with most solvent-borne and non-solvent radcure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-708 | Dynoadd by Dynea | Dynoadd® F-708 is a non-silicone polymericfoam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-708 controls surface tension in solvent or non-solvent ba...view more Dynoadd® F-708 is a non-silicone polymericfoam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-708 controls surface tension in solvent or non-solvent based coating systems. Small additions may also contribute to improved flow, and reduce surface imperfections such as craters and orange peel. Dynoadd® F-708 has a good compatibility with many wax dispersions giving good performance also in highly waxed coatings. Dynoadd® F-708 can be used in combination with Dynoadd® flow additives, in particular Dynoadd® F-101. Dynoadd® F-708 has applications in coil coatings, general industry, packaging coatings, and PVdF coatings. A first trial dose of 0.05% is recommended. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-711 | Dynoadd by Dynea | Dynoadd® F-711 combines highly efficient foam control properties with improved compatibility resulting in improved flow and levelling properties. This combination makes it particularly effective in preventing and reducing the effects of popping.Dynoadd® F...view more Dynoadd® F-711 combines highly efficient foam control properties with improved compatibility resulting in improved flow and levelling properties. This combination makes it particularly effective in preventing and reducing the effects of popping.Dynoadd® F-711 is effective in polyester or alkyd-melamine, 2K-PU and 2K-Acrylic formulations. It has applications in automotive refinish coatings, coil coatings, and industrial coatings. view less | Request Sample |
| Dynoadd® F-713 | Dynoadd by Dynea | Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding b...view more Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated PE and PUs. Dynoadd® F-713 may reduce film transparency. Dynoadd® F-713 has applications in 2K Epoxy, Unsat. PE, and 1 and 2K PU formulations. view less | Request Sample |
| Dynoadd® F-760 | Dynoadd by Dynea | Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in c...view more Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in coating surfaces that are easily recoated. Dynoadd® F-760 is based on a solution of foam destabilizing polymers and is silicone- and mineral oil-free. view less | Request Sample |
| Dynoadd® F-800 | Dynoadd by Dynea | Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the...view more Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters and pinholes. Dynoadd® F-800 also has a positive effect on both substrate and pigment wetting. view less | Request Sample |
| Dynoadd® F-802 | Dynoadd by Dynea | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured for...view more Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. view less | Request Sample |
| Dynoadd® F-810 | Dynoadd by Dynea | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...view more Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. view less | Request Sample |
| Dynoadd® P-506 | Dynoadd by Dynea | Dynoadd® P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-506 has a particle size of 6 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | Request Sample |
| Dynoadd® P-510 | Dynoadd by Dynea | Dynoadd P-510® is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd P-510® is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-510 has a particle size of 10 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | Request Sample |
| Dynoadd® P-515 | Dynoadd by Dynea | Dynoadd® P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-515 has a particle size of 15 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | Request Sample |
| Dynoadd® P-520 | Dynoadd by Dynea | Dynoadd® P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-520 has a particle size of 20 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | Request Sample |
| Dynoadd® P-530 | Dynoadd by Dynea | Dynoadd® P-530 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-530 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-530 has a particle size of 30 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | Request Sample |
| Dynoadd® P-540 | Dynoadd by Dynea | Dynoadd® P-540 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...view more Dynoadd® P-540 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-540 has a particle size of 40 microns.The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less | Request Sample |
| Dynoadd® R-1001 | Dynoadd by Dynea | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...view more Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. view less | Request Sample |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...view more Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. view less | |
| MDI CI 15/10000 | Castor International BV | MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solven...view more MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 15/10000 has an approximate equivalent weight of 280 g/mol with a viscosity of 10000 mPa.s at 23°C. view less | |
| MDI CI 16/1800 | Castor International BV | MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 16/1800 has an approximate equivalent weight of 262 g/mol with a viscosity of 1800 mPa.s at 23°C. view less | |
| MDI CI 22/1500 | Castor International BV | MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 22/1500 has an approximate equivalent weight of 191 g/mol with a viscosity of 1500 mPa.s at 23°C. view less | |
| MDI CI 25/1200 | Castor International BV | MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 25/1200 has an approximate equivalent weight of 168 g/mol with a viscosity of 1200 mPa.s at 23°C. view less | |
| MDI CI 32/120 | Castor International BV | MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...view more MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/120 has an approximate equivalent weight of 126 g/mol with a viscosity of 120 mPa.s at 23°C. view less | |
| MDI CI 32/200 | Castor International BV | MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...view more MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/200 has an approximate equivalent weight of 125 g/mol with a viscosity of 200 mPa.s at 23°C. view less | |
| MDI CI 32/40 | Castor International BV | MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-f...view more MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/40 has an approximate equivalent weight of 129 g/mol with a viscosity of 40 mPa.s at 23°C. view less | |
| Partially Dehydrated Castor Oil | Castor International BV | Partially Dehydrated Castor Oil is created when part of the chemically combined water, has been removed. Heating the oil in the presence of catalysts such as clay's and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out....view more Partially Dehydrated Castor Oil is created when part of the chemically combined water, has been removed. Heating the oil in the presence of catalysts such as clay's and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Partially Dehydrated Castor Oil has a characteristic odor and is a yellow oily liquid. It has an acid value of 5 mg KOH/g max and can be used as a hydrophobic and plasticizer component in paints, coatings, and moldings. view less | |
| PEG-25-CO | Castor International BV | PEG-25-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-CO has a HLB ...view more PEG-25-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-CO has a HLB of approximately 11, a saponification value of 70 to 90, and an iodine value of 30 to 50. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-25-HCO | Castor International BV | PEG-25-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25...view more PEG-25-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-25-HCO has a HLB of approximately 11 and a saponification value of 70 to 90. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-40-CO | Castor International BV | PEG-40-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-CO has a HLB ...view more PEG-40-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-CO has a HLB of approximately 14, a saponification value of 45 to 69, and an iodine value of 20 to 35. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-40-HCO | Castor International BV | PEG-40-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40...view more PEG-40-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-40-HCO has a HLB of approximately 14 and a saponification value of 45 to 69. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-60-CO | Castor International BV | PEG-60-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-CO has a HLB ...view more PEG-60-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-CO has a HLB of approximately 16, a saponification value of 40 to 51, and an iodine value of 15 to 30. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-60-HCO | Castor International BV | PEG-60-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60...view more PEG-60-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-60-HCO has a HLB of approximately 16 and a saponification value of 40 to 51. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-7-CO | Castor International BV | PEG-7-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-CO has a HLB of...view more PEG-7-CO, ethoxylated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-CO has a HLB of approximately 5, a saponification value of 125 to 140, and an iodine value of 55 to 75. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| PEG-7-HCO | Castor International BV | PEG-7-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-H...view more PEG-7-HCO, ethoxylated hydrogenated castor oil, is an ethylene oxide condensates of hydrogenated castor oil and castor oil, and the number of moles of ethylene oxide can vary. It is a liquid that has a white to yellow appearance with a faint odor. PEG-7-HCO has a HLB of approximately 5 and a saponification value of 125 to 140. Those products with ethylene oxide moles above 25 per oil are used as emulsifiers and stabilizers: in paints, for emulsification of universal tints, colorants, and pigment dispersions. view less | |
| Polyol CI 1200/10 | Castor International BV | Polyol CI 1200/10, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1300 mPa.s, and is harmless. Polyol CI 1200/10 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, ...view more Polyol CI 1200/10, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1300 mPa.s, and is harmless. Polyol CI 1200/10 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/1200 | Castor International BV | Polyol CI 1200/1200, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 500 mPa.s, and is harmless. Polyol CI 1200/1200 is used for adhesives, coatings, polyurethane cast moldings in combination with TD...view more Polyol CI 1200/1200, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 500 mPa.s, and is harmless. Polyol CI 1200/1200 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/240 | Castor International BV | Polyol CI 1200/240, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1050 mPa.s, and is harmless. Polyol CI 1200/240 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI...view more Polyol CI 1200/240, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 1050 mPa.s, and is harmless. Polyol CI 1200/240 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/3600 | Castor International BV | Polyol CI 1200/3600, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 350 mPa.s, and is harmless. Polyol CI 1200/3600 is used for adhesives, coatings, polyurethane cast moldings in combination with TD...view more Polyol CI 1200/3600, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 350 mPa.s, and is harmless. Polyol CI 1200/3600 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 1200/400 | Castor International BV | Polyol CI 1200/400, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 750 mPa.s, and is harmless. Polyol CI 1200/400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI,...view more Polyol CI 1200/400, a hydrolysis resistant, hydrophobic polyether triol; it has a density of 1 g/cm3, a viscosity (20°C) of 750 mPa.s, and is harmless. Polyol CI 1200/400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 29/825 | Castor International BV | Polyol CI 29/825, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 825 mPa.s, and is harmless. Polyol CI 29/825 is used for adhesives, sealants, coatings, polyurethane moldings (...view more Polyol CI 29/825, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 825 mPa.s, and is harmless. Polyol CI 29/825 is used for adhesives, sealants, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 400/400 | Castor International BV | Polyol CI 400/400, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 400 mPa.s, and is harmless. Polyol CI 400/400 is used for adhesives, coatings, polyurethane moldings (CASE app...view more Polyol CI 400/400, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 400 mPa.s, and is harmless. Polyol CI 400/400 is used for adhesives, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI 55/375 | Castor International BV | Polyol CI 55/375, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 375 mPa.s, and is harmless. Polyol CI 55/375 is used for adhesives, coatings, polyurethane moldings (CASE appli...view more Polyol CI 55/375, based on Castor Oil, is a hydrolysis stable, hydrophobic polyether polyol. It has a density of 1 g/cm3, a viscosity (20°C) of 375 mPa.s, and is harmless. Polyol CI 55/375 is used for adhesives, coatings, polyurethane moldings (CASE applications) in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI T-400 | Castor International BV | Polyol CI T-400, a hydrolysis resistant, hydrophobic polyether triol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI T-400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, ...view more Polyol CI T-400, a hydrolysis resistant, hydrophobic polyether triol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI T-400 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Polyol CI X-630/1000 | Castor International BV | Polyol CI X-630/1000, a hydrolysis resistant, hydrophobic tetrafunctional polyether polyol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI X-630/1000 is used for adhesives, coatings, polyurethane cast moldings in combin...view more Polyol CI X-630/1000, a hydrolysis resistant, hydrophobic tetrafunctional polyether polyol; it has an acid value of <3 mg KOH/g and a viscosity (25°C) of 400 mPa.s. Polyol CI X-630/1000 is used for adhesives, coatings, polyurethane cast moldings in combination with TDI, IPDI, HDI, and MDI. view less | |
| Ricinoleic Acid (RA) | Castor International BV | Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal ...view more Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal working fluids, cutting oils, emulsifiers, and industrial lubricants; Surface coating: used as a pigment/dye dispersants in plastics, inks, coatings, etc.; Textiles: providing surface wetting and lubricity, and polarity. view less | |
| Sulphonated Castor Oil (SCO) | Castor International BV | Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling ag...view more Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling agent. Sulphonated Castor Oil (SCO) is used as a dispersion and pigment wetting application in the paint industry, and as leveling and dye dispersion in the inks industry, among others. view less |
